Search Results

Search found 12104 results on 485 pages for 'auth basic'.

Page 445/485 | < Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >

  • Any socket programmers out there? How can I obtain the IPv4 address of the client?

    - by Dr Dork
    Hello! I'm prepping for a simple work project and am trying to familiarize myself with the basics of socket programming in a Unix dev environment. At this point, I have some basic server side code setup to listen for incoming TCP connection requests from clients after the parent socket has been created and is set to listen... int sockfd, newfd; unsigned int len; socklen_t sin_size; char msg[]="Test message sent"; char buf[MAXLEN]; int st, rv; struct addrinfo hints, *serverinfo, *p; struct sockaddr_storage client; char ip[INET6_ADDRSTRLEN]; . . //parent socket creation and listen code omitted for simplicity . //wait for connection requests from clients while(1) { //Returns the socketID and address of client connecting to socket if( ( newfd = accept(sockfd, (struct sockaddr *)&client, &len) ) == -1 ){ perror("Accept"); exit(-1); } if( (rv = recv(newfd, buf, MAXLEN-1, 0 )) == -1) { perror("Recv"); exit(-1); } struct sockaddr_in *clientAddr = ( struct sockaddr_in *) get_in_addr((struct sockaddr *)&client); inet_ntop(client.ss_family, clientAddr, ip, sizeof ip); printf("Receive from %s: query type is %s\n", ip, buf); if( ( st = send(newfd, msg, strlen(msg), 0)) == -1 ) { perror("Send"); exit(-1); } //ntohs is used to avoid big-endian and little endian compatibility issues printf("Send %d byte to port %d\n", ntohs(clientAddr->sin_port) ); close(newfd); } } I found the get_in_addr function online and placed it at the top of my code and use it to obtain the IP address of the client connecting... // get sockaddr, IPv4 or IPv6: void *get_in_addr(struct sockaddr *sa) { if (sa->sa_family == AF_INET) { return &(((struct sockaddr_in*)sa)->sin_addr); } return &(((struct sockaddr_in6*)sa)->sin6_addr); } but the function always returns the IPv6 IP address since thats what the sa_family property is set as. My question is, is the IPv4 IP address stored anywhere in the data I'm using and, if so, how can I access it? Thanks so much in advance for all your help!

    Read the article

  • How do I do high quality scaling of a image?

    - by pbhogan
    I'm writing some code to scale a 32 bit RGBA image in C/C++. I have written a few attempts that have been somewhat successful, but they're slow and most importantly the quality of the sized image is not acceptable. I compared the same image scaled by OpenGL (i.e. my video card) and my routine and it's miles apart in quality. I've Google Code Searched, scoured source trees of anything I thought would shed some light (SDL, Allegro, wxWidgets, CxImage, GD, ImageMagick, etc.) but usually their code is either convoluted and scattered all over the place or riddled with assembler and little or no comments. I've also read multiple articles on Wikipedia and elsewhere, and I'm just not finding a clear explanation of what I need. I understand the basic concepts of interpolation and sampling, but I'm struggling to get the algorithm right. I do NOT want to rely on an external library for one routine and have to convert to their image format and back. Besides, I'd like to know how to do it myself anyway. :) I have seen a similar question asked on stack overflow before, but it wasn't really answered in this way, but I'm hoping there's someone out there who can help nudge me in the right direction. Maybe point me to some articles or pseudo code... anything to help me learn and do. Here's what I'm looking for: 1. No assembler (I'm writing very portable code for multiple processor types). 2. No dependencies on external libraries. 3. I am primarily concerned with scaling DOWN, but will also need to write a scale up routine later. 4. Quality of the result and clarity of the algorithm is most important (I can optimize it later). My routine essentially takes the following form: DrawScaled( uint32 *src, uint32 *dst, src_x, src_y, src_w, src_h, dst_x, dst_y, dst_w, dst_h ); Thanks! UPDATE: To clarify, I need something more advanced than a box resample for downscaling which blurs the image too much. I suspect what I want is some kind of bicubic (or other) filter that is somewhat the reverse to a bicubic upscaling algorithm (i.e. each destination pixel is computed from all contributing source pixels combined with a weighting algorithm that keeps things sharp. EXAMPLE: Here's an example of what I'm getting from the wxWidgets BoxResample algorithm vs. what I want on a 256x256 bitmap scaled to 55x55. And finally: the original 256x256 image

    Read the article

  • C++0x: How can I access variadic tuple members by index at runtime?

    - by nonoitall
    I have written the following basic Tuple template: template <typename... T> class Tuple; template <uintptr_t N, typename... T> struct TupleIndexer; template <typename Head, typename... Tail> class Tuple<Head, Tail...> : public Tuple<Tail...> { private: Head element; public: template <uintptr_t N> typename TupleIndexer<N, Head, Tail...>::Type& Get() { return TupleIndexer<N, Head, Tail...>::Get(*this); } uintptr_t GetCount() const { return sizeof...(Tail) + 1; } private: friend struct TupleIndexer<0, Head, Tail...>; }; template <> class Tuple<> { public: uintptr_t GetCount() const { return 0; } }; template <typename Head, typename... Tail> struct TupleIndexer<0, Head, Tail...> { typedef Head& Type; static Type Get(Tuple<Head, Tail...>& tuple) { return tuple.element; } }; template <uintptr_t N, typename Head, typename... Tail> struct TupleIndexer<N, Head, Tail...> { typedef typename TupleIndexer<N - 1, Tail...>::Type Type; static Type Get(Tuple<Head, Tail...>& tuple) { return TupleIndexer<N - 1, Tail...>::Get(*(Tuple<Tail...>*) &tuple); } }; It works just fine, and I can access elements in array-like fashion by using tuple.Get<Index() - but I can only do that if I know the index at compile-time. However, I need to access elements in the tuple by index at runtime, and I won't know at compile-time which index needs to be accessed. Example: int chosenIndex = getUserInput(); cout << "The option you chose was: " << tuple.Get(chosenIndex) << endl; What's the best way to do this?

    Read the article

  • cannot access localhost using ip

    - by Robert
    I have done a small web development project using eclipse. It runs well when I try running it on browser with url localhost:8080/myproject/home.html. But if I want to access it on another machine (laptop, mobile, etc. using the same wifi) it is not possible; it is not able to connect. After Googling for a while found out that I have to use the IP address instead of 'localhost'. So I tried 10.0.0.4:8080/myproject/home.html, but still does not work. In fact i am unable to open that url on the same machine (where localhost:8080/myproject/home.html works fine). I also added a new Inbound rule in control panel firewall settings, allowing access to all ports for protocol TCP. Still have problem in running application with the url 10.0.0.4:8080/myproject/home.html (both on same machine as well as laptop and mobile). FYI i am using Eclipse Indigo, Apache tomcat 6.0 and server.xml file contents is as below: <?xml version="1.0" encoding="UTF-8"?> <!-- Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to You under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. --><!-- Note: A "Server" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/server.html --><Server port="8005" shutdown="SHUTDOWN"> <!--APR library loader. Documentation at /docs/apr.html --> <Listener SSLEngine="on" className="org.apache.catalina.core.AprLifecycleListener"/> <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html --> <Listener className="org.apache.catalina.core.JasperListener"/> <!-- Prevent memory leaks due to use of particular java/javax APIs--> <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener"/> <!-- JMX Support for the Tomcat server. Documentation at /docs/non-existent.html --> <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"/> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"/> <!-- Global JNDI resources Documentation at /docs/jndi-resources-howto.html --> <GlobalNamingResources> <!-- Editable user database that can also be used by UserDatabaseRealm to authenticate users --> <Resource auth="Container" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" name="UserDatabase" pathname="conf/tomcat-users.xml" type="org.apache.catalina.UserDatabase"/> </GlobalNamingResources> <!-- A "Service" is a collection of one or more "Connectors" that share a single "Container" Note: A "Service" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/service.html --> <Service name="Catalina"> <!--The connectors can use a shared executor, you can define one or more named thread pools--> <!-- <Executor name="tomcatThreadPool" namePrefix="catalina-exec-" maxThreads="150" minSpareThreads="4"/> --> <!-- A "Connector" represents an endpoint by which requests are received and responses are returned. Documentation at : Java HTTP Connector: /docs/config/http.html (blocking & non-blocking) Java AJP Connector: /docs/config/ajp.html APR (HTTP/AJP) Connector: /docs/apr.html Define a non-SSL HTTP/1.1 Connector on port 8080 --> <Connector port="8080" protocol="HTTP/1.1" address="10.0.0.4" connectionTimeout="20000" redirectPort="8443" /> <!-- A "Connector" using the shared thread pool--> <!-- <Connector executor="tomcatThreadPool" port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> --> <!-- Define a SSL HTTP/1.1 Connector on port 8443 This connector uses the JSSE configuration, when using APR, the connector should be using the OpenSSL style configuration described in the APR documentation --> <!-- <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" /> --> <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443"/> <!-- An Engine represents the entry point (within Catalina) that processes every request. The Engine implementation for Tomcat stand alone analyzes the HTTP headers included with the request, and passes them on to the appropriate Host (virtual host). Documentation at /docs/config/engine.html --> <!-- You should set jvmRoute to support load-balancing via AJP ie : <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1"> --> <Engine defaultHost="localhost" name="Catalina"> <!--For clustering, please take a look at documentation at: /docs/cluster-howto.html (simple how to) /docs/config/cluster.html (reference documentation) --> <!-- <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> --> <!-- The request dumper valve dumps useful debugging information about the request and response data received and sent by Tomcat. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.RequestDumperValve"/> --> <!-- This Realm uses the UserDatabase configured in the global JNDI resources under the key "UserDatabase". Any edits that are performed against this UserDatabase are immediately available for use by the Realm. --> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> <!-- Define the default virtual host Note: XML Schema validation will not work with Xerces 2.2. --> <Host appBase="webapps" autoDeploy="true" name="localhost" unpackWARs="true" xmlNamespaceAware="false" xmlValidation="false"> <!-- SingleSignOn valve, share authentication between web applications Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> --> <!-- Access log processes all example. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/> --> <Context docBase="myproject" path="/myproject" reloadable="true" source="org.eclipse.jst.jee.server:myproject"/></Host> </Engine> </Service> </Server>

    Read the article

  • Using PHP session_id() to Make Sure iframe is Generated by Our Server Dynamically

    - by Michael Robinson
    We use iframes to show ads on our site. Iframes are used to allow us to keep the ad generation code and other site modules separate. As we track ad views on our site, and need to be able to keep an accurate count of which pagetype gets what views, I must ensure that users can't simply copy-paste the iframe in which the ad is loaded onto another site. This would cause ad count to become inflated for this page, and the count would not match the view count of the page the iframe "should" be displayed in. Before anyone says so: no I can't simply compare the page view count with the ad view count, or use the page view count * number of ads per page, as # of ads per page will not necessarily be static. I need to come up with a solution that will allow ads to be shown only for iframes that are generated dynamically and are shown on our pages. I am not familiar with PHP sessions, but from what little reading I have had time to do, the following seems to be to be an acceptable solution: Add "s = session_id()" to the src of the ad's iframe. In the code that receives and processes ad requests, only return (and count) and ad if s == session_id(). Please correct me if I'm wrong, but this would ensure: Ads would only be returned to iframes whose src was generated alongside the rest of the page's content, as is the case during normal use. We can return our logo to ad calls with an invalid session_id. So a simple example would be: One of our pages: <?php session_start(); ?> <div id="someElement"> <!-- EVERYONE LOVES ADS --> <iframe src="http//awesomesite.com/ad/can_has_ad.php?s=<?php echo session_id(); ?>></iframe> </div> ad/can_has_ad.php: <?php session_start(); ?> if($_GET['s'] == session_id()){ echo 'can has ad'; } else{ echo '<img src="http://awesomesite.com/images/canhaslogo.jpg"/>'; } And finally, copied code with static 's' parameter: <!-- HAHA LULZ I WILL SCREW WITH YOUR AD VIEW COUNTS LULZ HAHA --> <iframe src="http//awesomesite.com/ad/can_has_ad.php?s=77f2b5fcdab52f52607888746969b0ad></iframe> Which would give them an iframe showing our awesome site's logo, and not screw with our view counts. I made some basic test cases: two files, one that generates the iframe and echos it, and one that the iframe's src is pointed to, that checks the 's' parameter and shows an appropriate message depending on the result. I copied the iframe into a file and hosted it on a different server, and the correct message was displayed (cannot has ad). So, my question is: Would this work or am I being a PHP session noob, with the above test being a total fluke? Thanks for your time! Edit: I'm trying to solve this without touching the SQL server

    Read the article

  • Large number of UPDATE queries slowing down page

    - by Bryan Lewis
    I am reading and validating large fixed-width text files (range from 10-50K lines) that are submitted via our ASP.net website (coded in VB.Net). I do an initial scan of the file to check for basic issues (line length, etc). Then I import each row into a MS SQL table. Each DB rows basically consists of a record_ID (Primary, auto-incrementing) and about 50 varchar fields. After the insert is done, I run a validation function on the file that checks each field in each row based on a bunch of criteria (trimmed length, isnumeric, range checks, etc). If it finds an error in any field, it inserts a record into the Errors table, which has an error_ID, the record_ID and an error message. In addition, if the field fails in a particular way, I have to do a "reset" on that field. A reset might consist of blanking the entire field, or simply replacing the value with another value (e.g. replacing the string with a new one that has all illegals chars taken out). I have a 5,000 line test file. The upload, initial check, and import takes about 5-6 seconds. The detailed error check and insert into the Errors table takes about 5-8 seconds (this file has about 1200 errors in it). However, the "resets" part takes about 40-45 seconds for 750 fields that need to be reset. When I comment out the resets function (returning immediately without actually calling the UPDATE stored proc), the process is very fast. With the resets turned on, the pages take 50 seconds to return. My UPDATE stored proc is using some recommended code from http://sommarskog.se/dynamic_sql.html, whereby it uses CASE instead of dynamic SQL: UPDATE dbo.Records SET dbo.Records.file_ID = CASE @field_name WHEN 'file_ID' THEN @field_value ELSE file_ID END, . . (all 50 varchar field CASE statements here) . WHERE dbo.Records.record_ID = @record_ID Is there any way I can help my performance here. Can I somehow group all of these UPDATE calls into a single transaction? Should I be reworking the UPDATE query somehow? Or is it just sheer quantity of 750+ UPDATEs and things are just slow (it's a quad proc server with 8GB ram). Any suggestions appreciated.

    Read the article

  • Using MySQL to generate daily sales reports with filled gaps, grouped by currency

    - by Shane O'Grady
    I'm trying to create what I think is a relatively basic report for an online store, using MySQL 5.1.45 The store can receive payment in multiple currencies. I have created some sample tables with data and am trying to generate a straightforward tabular result set grouped by date and currency so that I can graph these figures. I want to see each currency that is available per date, with a 0 in the result if there were no sales in that currency for that day. If I can get that to work I want to do the same but also grouped by product id. In the sample data I have provided there are only 3 currencies and 2 product ids, but in practice there can be any number of each. I can correctly group by date, but then when I add a grouping by currency my query does not return what I want. I based my work off this article. My reporting query, grouped only by date: SELECT calendar.datefield AS date, IFNULL(SUM(orders.order_value),0) AS total_value FROM orders RIGHT JOIN calendar ON (DATE(orders.order_date) = calendar.datefield) WHERE (calendar.datefield BETWEEN (SELECT MIN(DATE(order_date)) FROM orders) AND (SELECT MAX(DATE(order_date)) FROM orders)) GROUP BY date Now grouped by date and currency: SELECT calendar.datefield AS date, orders.currency_id, IFNULL(SUM(orders.order_value),0) AS total_value FROM orders RIGHT JOIN calendar ON (DATE(orders.order_date) = calendar.datefield) WHERE (calendar.datefield BETWEEN (SELECT MIN(DATE(order_date)) FROM orders) AND (SELECT MAX(DATE(order_date)) FROM orders)) GROUP BY date, orders.currency_id The results I am getting (grouped by date and currency): +------------+-------------+-------------+ | date | currency_id | total_value | +------------+-------------+-------------+ | 2009-08-15 | 3 | 81.94 | | 2009-08-15 | 45 | 25.00 | | 2009-08-15 | 49 | 122.60 | | 2009-08-16 | NULL | 0.00 | | 2009-08-17 | 45 | 25.00 | | 2009-08-17 | 49 | 122.60 | | 2009-08-18 | 3 | 81.94 | | 2009-08-18 | 49 | 245.20 | +------------+-------------+-------------+ The results I want: +------------+-------------+-------------+ | date | currency_id | total_value | +------------+-------------+-------------+ | 2009-08-15 | 3 | 81.94 | | 2009-08-15 | 45 | 25.00 | | 2009-08-15 | 49 | 122.60 | | 2009-08-16 | 3 | 0.00 | | 2009-08-16 | 45 | 0.00 | | 2009-08-16 | 49 | 0.00 | | 2009-08-17 | 3 | 0.00 | | 2009-08-17 | 45 | 25.00 | | 2009-08-17 | 49 | 122.60 | | 2009-08-18 | 3 | 81.94 | | 2009-08-18 | 45 | 0.00 | | 2009-08-18 | 49 | 245.20 | +------------+-------------+-------------+ The schema and data I am using in my tests: CREATE TABLE orders ( id INT PRIMARY KEY AUTO_INCREMENT, order_date DATETIME, order_id INT, product_id INT, currency_id INT, order_value DECIMAL(9,2), customer_id INT ); INSERT INTO orders (order_date, order_id, product_id, currency_id, order_value, customer_id) VALUES ('2009-08-15 10:20:20', '123', '1', '45', '12.50', '322'), ('2009-08-15 12:30:20', '124', '1', '49', '122.60', '400'), ('2009-08-15 13:41:20', '125', '1', '3', '40.97', '324'), ('2009-08-15 10:20:20', '126', '2', '45', '12.50', '345'), ('2009-08-15 13:41:20', '131', '2', '3', '40.97', '756'), ('2009-08-17 10:20:20', '3234', '1', '45', '12.50', '1322'), ('2009-08-17 10:20:20', '4642', '2', '45', '12.50', '1345'), ('2009-08-17 12:30:20', '23', '2', '49', '122.60', '3142'), ('2009-08-18 12:30:20', '2131', '1', '49', '122.60', '4700'), ('2009-08-18 13:41:20', '4568', '1', '3', '40.97', '3274'), ('2009-08-18 12:30:20', '956', '2', '49', '122.60', '3542'), ('2009-08-18 13:41:20', '443', '2', '3', '40.97', '7556'); CREATE TABLE currency ( id INT PRIMARY KEY, name VARCHAR(255) ); INSERT INTO currency (id, name) VALUES (3, 'Euro'), (45, 'US Dollar'), (49, 'CA Dollar'); CREATE TABLE calendar (datefield DATE); DELIMITER | CREATE PROCEDURE fill_calendar(start_date DATE, end_date DATE) BEGIN DECLARE crt_date DATE; SET crt_date=start_date; WHILE crt_date < end_date DO INSERT INTO calendar VALUES(crt_date); SET crt_date = ADDDATE(crt_date, INTERVAL 1 DAY); END WHILE; END | DELIMITER ; CALL fill_calendar('2008-01-01', '2011-12-31');

    Read the article

  • Android Couchdb - libcouch and IPC Aidl Services

    - by dirtySanchez
    I am working on a native CouchdDB app with android. Now just this week CouchOne released libcouch, described as "Library files needed to interact with CouchDB on Android": couchone_libcouch@Github It is a basic app that installs CouchDB if the CouchDB service (that comes with CouchDB if it was installed previously) can't be bound to. To be more precise, as I understand it: libcouch estimates CouchDb's presence on the device by trying to bind to a IPC Service from CouchDB and through that service wants communicate with CouchDB. Please see the method "attemptLaunch()" at CouchAppLauncher.class for reviewing this: public void attemptLaunch() { Log.i(TAG,"1.) called attemptLaunch"); Intent intent = new Intent(ICouchService.class.getName()); Log.i(TAG,"1.a) setup Intent"); Boolean canStart = bindService(intent, couchServiceConn, Context.BIND_AUTO_CREATE); Log.i(TAG,"1.b bound service. canStart: " + Boolean.toString(canStart)); if (!canStart) { setContentView(R.layout.install_couchdb); TextView label = (TextView) findViewById(R.id.install_couchdb_text); Button btn = (Button) this.findViewById(R.id.install_couchdb_btn); String text = getString(R.string.app_name) + " requires Apache CouchDB to be installed."; label.setText(text); // Launching the market will fail on emulators btn.setOnClickListener(new View.OnClickListener() { public void onClick(View v) { launchMarket(); finish(); } }); } } The question(s) I have about this are: libcouch never is able to "find" a previously installed CouchDB. It always attempts to install CouchDB from the market. This is because it never actually is able to bind to the CouchDBService. As I understand the purpose auf AIDL generated service interfaces, the actual service that intends to offer it's IPC to other applications should make use of AIDL. In this case the AIDL has been moved to the application that is trying to bind to the remote service, which is libcouch in this case. Reviewing the commits the AIDL files have just been moved out of that repository to libcouch. For complete linkage, here's the link to the Android CouchDB sources: github.com/couchone/libcouch-android Now, I could be completely wrong in my findings, it could also be lincouch's Manifest that s missing something, but I am really looking forward to get some answers!

    Read the article

  • Error Handling for Application in PHP

    - by Zubair1
    I was wondering if someone can show me a good way to handle errors in my PHP app, that i am also easily able to reuse in my codes. So far i have been using the following functions: Inline Errors function display_errors_for($fieldname) { global $errors; if (isset($errors[$fieldname])) { return '<label for="' .$fieldname. '" class="error">' . ucfirst($errors[$fieldname]). '</label>'; } else { return false; } } All Errrors function display_all_errors($showCounter = true) { global $errors; $counter = 0; foreach ($errors as $errorFieldName => $errorText) { if ($showCounter == true) { $counter++; echo '<li>' . $counter . ' - <label for="' .$errorFieldName. '">' .$errorText. '</label></li>'; } else { echo '<li><label for="' .$errorFieldName. '">' .$errorText. '</label></li>'; } } } I have a $errors = array(); defined on the top of my global file, so it is appended to all files. The way i use it is that if i encounter an error, i push a new error key/value to the $errors array holder, something like the following: if (strlen($username) < 3) { $errors['username'] = "usernames cannot be less then 3 characters."; } This all works great and all, But i wondering if some one has a better approach for this? with classes? i don't think i want to use Exceptions with try/catch seems like an overkill to me. I'm planning to make a new app, and i'll be getting my hands wet with OOP alot, though i have already made apps using OOP but this time i'm planning to go even deeper and use OOP approach more extensively. What i have in mind is something like this, though its just a basic class i will add further detail to it as i go deeper and deeper in my app to see what it needs. class Errors { public $errors = array(); public function __construct() { // Initialize Default Values // Initialize Methods } public function __destruct() { //nothing here too... } public function add($errorField, $errorDesc) { if (!is_string($errorField)) return false; if (!is_string($errorDesc)) return false; $this->errors[$errorField] = $errorDesc; } public function display($errorsArray) { // code to iterate through the array and display all errors. } } Please share your thoughts, if this is a good way to make a reusable class to store and display errors for an entire app, or is getting more familiar with exceptions and try/catch my only choice?

    Read the article

  • In a PHP project, how do you organize and access your helper objects?

    - by Pekka
    How do you organize and manage your helper objects like the database engine, user notification, error handling and so on in a PHP based, object oriented project? Say I have a large PHP CMS. The CMS is organized in various classes. A few examples: the database object user management an API to create/modify/delete items a messaging object to display messages to the end user a context handler that takes you to the right page a navigation bar class that shows buttons a logging object possibly, custom error handling etc. I am dealing with the eternal question, how to best make these objects accessible to each part of the system that needs it. my first apporach, many years ago was to have a $application global that contained initialized instances of these classes. global $application; $application->messageHandler->addMessage("Item successfully inserted"); I then changed over to the Singleton pattern and a factory function: $mh =&factory("messageHandler"); $mh->addMessage("Item successfully inserted"); but I'm not happy with that either. Unit tests and encapsulation become more and more important to me, and in my understanding the logic behind globals/singletons destroys the basic idea of OOP. Then there is of course the possibility of giving each object a number of pointers to the helper objects it needs, probably the very cleanest, resource-saving and testing-friendly way but I have doubts about the maintainability of this in the long run. Most PHP frameworks I have looked into use either the singleton pattern, or functions that access the initialized objects. Both fine approaches, but as I said I'm happy with neither. I would like to broaden my horizon on what is possible here and what others have done. I am looking for examples, additional ideas and pointers towards resources that discuss this from a long-term, real-world perspective. Also, I'm interested to hear about specialized, niche or plain weird approaches to the issue. Bounty I am following the popular vote in awarding the bounty, the answer which is probably also going to give me the most. Thank you for all your answers!

    Read the article

  • newbie problems with codeigniter

    - by Patrick
    hi, i'm trying to learn codeigniter (following a book) but don't understand why the web page comes out empty. my controller is class Welcome extends Controller { function Welcome() { parent::Controller(); } function index() { $data['title'] = "Welcome to Claudia's Kids"; $data['navlist'] = $this->MCats->getCategoriesNav(); $data['mainf'] = $this->MProducts->getMainFeature(); $skip = $data['mainf']['id']; $data['sidef'] = $this->MProducts->getRandomProducts(3, $skip); $data['main'] = "home"; $this->load->vars($data); $this->load->view('template'); } the view is: <--doctype declaration etc etc.. --> </head> <body> <div id="wrapper"> <div id="header"> <?php $this->load->view('header');?> </div> <div id='nav'> <?php $this->load->view('navigation');?> </div> <div id="main"> <?php $this->load->view($main);?> </div> <div id="footer"> <?php $this->load->view('footer');?> </div> </div> </body> </html> Now I know the model is passing back the right variables, but the page appears completely blank. I would expect at least to see an error, or the basic html structure, but the page is just empty. Moreover, the controller doesn't work even if I modify it as follows: function index() { echo "hello."; } What am I doing wrong? Everything was working until I made some changes to the model - but even if I delete all those new changes, the page is still blank.. i'm really confused! thanks, P.

    Read the article

  • Application error with MyFaces 1.2: java.lang.IllegalStateException: No Factories configured for this Application.

    - by IgorB
    For my app I'm using Tomcat 6.0.x and Mojarra 1.2_04 JSF implementation. It works fine, just I would like to switch now to MyFaces 1.2_10 impl of JSF. During the deployment of my app a get the following error: ERROR [org.apache.catalina.core.ContainerBase.[Catalina].[localhost].[/myApp]] StandardWrapper.Throwable java.lang.IllegalStateException: No Factories configured for this Application. This happens if the faces-initialization does not work at all - make sure that you properly include all configuration settings necessary for a basic faces application and that all the necessary libs are included. Also check the logging output of your web application and your container for any exceptions! If you did that and find nothing, the mistake might be due to the fact that you use some special web-containers which do not support registering context-listeners via TLD files and a context listener is not setup in your web.xml. A typical config looks like this; <listener> <listener-class>org.apache.myfaces.webapp.StartupServletContextListener</listener-class> </listener> at javax.faces.FactoryFinder.getFactory(FactoryFinder.java:106) at javax.faces.webapp.FacesServlet.init(FacesServlet.java:137) at org.apache.myfaces.webapp.MyFacesServlet.init(MyFacesServlet.java:113) at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1172) at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:992) at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4058) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4371) ... Here is part of my web.xml configuration: <servlet> <servlet-name>Faces Servlet</servlet-name> <!-- <servlet-class>javax.faces.webapp.FacesServlet</servlet-class> --> <servlet-class>org.apache.myfaces.webapp.MyFacesServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> ... <listener> <listener- class>org.apache.myfaces.webapp.StartupServletContextListener</listener-class> </listener> Has anyone experienced similar error, and what should I do i order to fix it? Thanx!

    Read the article

  • PHP 'instanceof' failing with class constant

    - by Nathan Loding
    I'm working on a framework that I'm trying to type as strongly as I possibly can. (I'm working within PHP and taking some of the ideas that I like from C# and trying to utilize them within this framework.) I'm creating a Collection class that is a collection of domain entities/objects. It's kinda modeled after the List<T> object in .Net. I've run into an obstacle that is preventing me from typing this class. If I have a UserCollection, it should only allow User objects into it. If I have a PostCollection, it should only allow Post objects. All Collections in this framework need to have certain basic functions, such as add, remove, iterate. I created an interface, but found that I couldn't do the following: interface ICollection { public function add($obj) } class PostCollection implements ICollection { public function add(Post $obj) {} } This broke it's compliance with the interface. But I can't have the interface strongly typed because then all Collections are of the same type. So I attempted the following: interface ICollection { public function add($obj) } abstract class Collection implements ICollection { const type = 'null'; } class PostCollection { const type = 'Post'; public function add($obj) { if(!($obj instanceof self::type)) { throw new UhOhException(); } } } When I attempt to run this code, I get syntax error, unexpected T_STRING, expecting T_VARIABLE or '$' on the instanceof statement. A little research into the issue and it looks like the root of the cause is that $obj instanceof self is valid to test against the class. It appears that PHP doesn't process the entire self::type constant statement in the expression. Adding parentheses around the self::type variable threw an error regarding an unexpected '('. An obvious workaround is to not make the type variable a constant. The expression $obj instanceof $this->type works just fine (if $type is declared as a variable, of course). I'm hoping that there's a way to avoid that, as I'd like to define the value as a constant to avoid any possible change in the variable later. Any thoughts on how I can achieve this, or have I take PHP to it's limit in this regard? Is there a way of "escaping" or encapsulating self::this so that PHP won't die when processing it?

    Read the article

  • Calculating rotation and translation matrices between two odometry positions for monocular linear triangulation

    - by user1298891
    Recently I've been trying to implement a system to identify and triangulate the 3D position of an object in a robotic system. The general outline of the process goes as follows: Identify the object using SURF matching, from a set of "training" images to the actual live feed from the camera Move/rotate the robot a certain amount Identify the object using SURF again in this new view Now I have: a set of corresponding 2D points (same object from the two different views), two odometry locations (position + orientation), and camera intrinsics (focal length, principal point, etc.) since it's been calibrated beforehand, so I should be able to create the 2 projection matrices and triangulate using a basic linear triangulation method as in Hartley & Zissermann's book Multiple View Geometry, pg. 312. Solve the AX = 0 equation for each of the corresponding 2D points, then take the average In practice, the triangulation only works when there's almost no change in rotation; if the robot even rotates a slight bit while moving (due to e.g. wheel slippage) then the estimate is way off. This also applies for simulation. Since I can only post two hyperlinks, here's a link to a page with images from the simulation (on the map, the red square is simulated robot position and orientation, and the yellow square is estimated position of the object using linear triangulation.) So you can see that the estimate is thrown way off even by a little rotation, as in Position 2 on that page (that was 15 degrees; if I rotate it any more then the estimate is completely off the map), even in a simulated environment where a perfect calibration matrix is known. In a real environment when I actually move around with the robot, it's worse. There aren't any problems with obtaining point correspondences, nor with actually solving the AX = 0 equation once I compute the A matrix, so I figure it probably has to do with how I'm setting up the two camera projection matrices, specifically how I'm calculating the translation and rotation matrices from the position/orientation info I have relative to the world frame. How I'm doing that right now is: Rotation matrix is composed by creating a 1x3 matrix [0, (change in orientation angle), 0] and then converting that to a 3x3 one using OpenCV's Rodrigues function Translation matrix is composed by rotating the two points (start angle) degrees and then subtracting the final position from the initial position, in order to get the robot's straight and lateral movement relative to its starting orientation Which results in the first projection matrix being K [I | 0] and the second being K [R | T], with R and T calculated as described above. Is there anything I'm doing really wrong here? Or could it possibly be some other problem? Any help would be greatly appreciated.

    Read the article

  • A better way to delete a list of elements from multiple tables

    - by manyxcxi
    I know this looks like a 'please write the code' request, but some basic pointer/principles for doing this the right way should be enough to get me going. I have the following stored procedure: CREATE PROCEDURE `TAA`.`runClean` (IN idlist varchar(1000)) BEGIN DECLARE EXIT HANDLER FOR NOT FOUND ROLLBACK; DECLARE EXIT HANDLER FOR SQLEXCEPTION ROLLBACK; DECLARE EXIT HANDLER FOR SQLWARNING ROLLBACK; START TRANSACTION; DELETE FROM RunningReports WHERE run_id IN (idlist); DELETE FROM TMD_INDATA_INVOICE WHERE run_id IN (idlist); DELETE FROM TMD_INDATA_LINE WHERE run_id IN (idlist); DELETE FROM TMD_OUTDATA_INVOICE WHERE run_id IN (idlist); DELETE FROM TMD_OUTDATA_LINE WHERE run_id IN (idlist); DELETE FROM TMD_TEST WHERE run_id IN (idlist); DELETE FROM RunHistory WHERE id IN (idlist); COMMIT; END $$ It is called by a PHP script to clean out old run history. It is not particularly efficient as you can see and I would like to speed it up. The PHP script gathers the ids to remove from the tables with the following query: $query = "SELECT id, stop_time FROM RunHistory WHERE config_id = $configId AND save = 0 AND NOT(stop_time IS NULL) ORDER BY stop_time"; It keeps the last five run entries and deletes all the rest. So using this query to bring back all the IDs, it determines which ones to delete and keeps the 'newest' five. After gathering the IDs it sends them to the stored procedure to remove them from the associated tables. I'm not very good with SQL, but I ASSUME that using an IN statement and not joining these tables together is probably the least efficient way I can do this, but I don't know enough to ask anything but "how do I do this better?" If possible, I would like to do this all in my stored procedure using a query to gather all the IDs except for the five 'newest', then delete them. Another twist, run entries can be marked save (save = 1) and should not be deleted. The RunHistory table looks like this: CREATE TABLE `TAA`.`RunHistory` ( `id` int(11) NOT NULL auto_increment, `start_time` datetime default NULL, `stop_time` datetime default NULL, `config_id` int(11) NOT NULL, [...] `save` tinyint(1) NOT NULL default '0', PRIMARY KEY (`id`) ) ENGINE=InnoDB AUTO_INCREMENT=0 DEFAULT CHARSET=utf8;

    Read the article

  • Using fft2 with reshaping for an RGB filter

    - by Mahmoud Aladdin
    I want to apply a filter on an image, for example, blurring filter [[1/9.0, 1/9.0, 1/9.0], [1/9.0, 1/9.0, 1/9.0], [1/9.0, 1/9.0, 1/9.0]]. Also, I'd like to use the approach that convolution in Spatial domain is equivalent to multiplication in Frequency domain. So, my algorithm will be like. Load Image. Create Filter. convert both Filter & Image to Frequency domains. multiply both. reconvert the output to Spatial Domain and that should be the required output. The following is the basic code I use, the image is loaded and displayed as cv.cvmat object. Image is a class of my creation, it has a member image which is an object of scipy.matrix and toFrequencyDomain(size = None) uses spf.fftshift(spf.fft2(self.image, size)) where spf is scipy.fftpack and dotMultiply(img) uses scipy.multiply(self.image, image) f = Image.fromMatrix([[1/9.0, 1/9.0, 1/9.0], [1/9.0, 1/9.0, 1/9.0], [1/9.0, 1/9.0, 1/9.0]]) lena = Image.fromFile("Test/images/lena.jpg") print lena.image.shape lenaf = lena.toFrequencyDomain(lena.image.shape) ff = f.toFrequencyDomain(lena.image.shape) lenafm = lenaf.dotMultiplyImage(ff) lenaff = lenafm.toTimeDomain() lena.display() lenaff.display() So, the previous code works pretty well, if I told OpenCV to load the image via GRAY_SCALE. However, if I let the image to be loaded in color ... lena.image.shape will be (512, 512, 3) .. so, it gives me an error when using scipy.fttpack.ftt2 saying "When given, Shape and Axes should be of same length". What I tried next was converted my filter to 3-D .. as [[[1/9.0, 1/9.0, 1/9.0], [1/9.0, 1/9.0, 1/9.0], [1/9.0, 1/9.0, 1/9.0]], [[1/9.0, 1/9.0, 1/9.0], [1/9.0, 1/9.0, 1/9.0], [1/9.0, 1/9.0, 1/9.0]], [[1/9.0, 1/9.0, 1/9.0], [1/9.0, 1/9.0, 1/9.0], [1/9.0, 1/9.0, 1/9.0]]] And, not knowing what the axes argument do, I added it with random numbers as (-2, -1, -1), (-1, -1, -2), .. etc. until it gave me the correct filter output shape for the dotMultiply to work. But, of course it wasn't the correct value. Things were totally worse. My final trial, was using fft2 function on each of the components 2-D matrices, and then re-making the 3-D one, using the following code. # Spiltting the 3-D matrix to three 2-D matrices. for i, row in enumerate(self.image): r.append(list()) g.append(list()) b.append(list()) for pixel in row: r[i].append(pixel[0]) g[i].append(pixel[1]) b[i].append(pixel[2]) rfft = spf.fftshift(spf.fft2(r, size)) gfft = spf.fftshift(spf.fft2(g, size)) bfft = spf.fftshift(spf.fft2(b, size)) newImage.image = sp.asarray([[[rfft[i][j], gfft[i][j], bfft[i][j]] for j in xrange(len(rfft[i]))] for i in xrange(len(rfft))] ) return newImage Any help on what I made wrong, or how can I achieve that for both GreyScale and Coloured pictures.

    Read the article

  • What would you suggest as a high school first language?

    - by ldigas
    Edit by OA: After reading some answers I'll just update the question a little. At first I put it a little bluntly, but some of those gave me some good arguments which have to be taken into consideration while making a stand on this one. (these are mostly picked up from comments and answers below). A few things to take into account: to many pupils this is a first programming language - at this stage most of them have trouble grasping a difference between data types, variable passing, ... and whatnot, less alone pointers and similar 'low level stuff' :) they will all have to pass this to get into next grade (well, big majority of them anyway) not all of them have computers at home, not all of them are willing to learn this, less alone interested in - so the concepts have to be taught on a finite time scale in school hours (as well as practice on computers) free literature is a bonus - the teacher will make some scripts and handaways, but still ... I wouldn't like to bear the parents with the burden of buying expensive literature (also, english is not a native language here ... and although they are all learning it, their ability to read it fluently is somewhat questionable) somebody gave an argument - "a language which does not get in the way of ideas" - good one accessibility on different platforms in not expecially important at this point - although most of the suggested ones are available on win as well as linux - not many macs in this part of europe (their prices are sky high for anything but specialised usage) I will check what are the licencing issues on ms express editions about using it massively in high schools for purposes like this - if someone has any info about this, please, do not be shy with it :) A friend of mine, informatics teacher - in EU it comes as something as junior cs teacher, in a local high school asked me what I thought about what should be the first language pupils should be taught? It is a technical school (a little more oriented towards mathematics than the gymnasium, but not computer oriented totally). So I'm asking you - what do you think should be the first language pupils are exposed to in highschool? They have been teaching Pascal so far, but she's not sure that's a good course. She thought about switching to C (which I resented; considering not all pupils have interests in programming, to start with, and should be taught something higher level since they are just gripping the idea of a loop and such ... for a start), I suggested python or ruby (preferably py since it handles all paradigms). What is your opinion on this one? I looked, but didn't find a similar question on SO, so if there is one, please just point me towards it. Edit: The assumption is that none of the pupils have been exposed to any programming in junior school. See also: What is the best way to teach young kids some basic programming concepts? Best ways to teach a beginner to program How and when do you teach a kid to code What is the easiest language to start with? High School Programming

    Read the article

  • Setting up a "to-many" relationship value dependency for a transient Core Data attribute

    - by Greg Combs
    I've got a relatively complicated Core Data relationship structure and I'm trying to figure out how to set up value dependencies (or observations) across various to-many relationships. Let me start out with some basic info. I've got a classroom with students, assignments, and grades (students X assignments). For simplicity's sake, we don't really have to focus much on the assignments yet. StudentObj <--->> ScoreObj <<---> AssignmentObj Each ScoreObj has a to-one relation with the StudentObj and the AssignmentObj. ScoreObj has real attributes for the numerical grade, the turnInDate, and notes. AssignmentObj.scores is the set of Score objects for that assignment (N = all students). AssignmentObj has real attributes for name, dueDate, curveFunction, gradeWeight, and maxPoints. StudentObj.scores is the set of Score objects for that student (N = all assignments). StudentObj also has real attributes like name, studentID, email, etc. StudentObj has a transient (calculated, not stored) attribute called gradeTotal. This last item, gradeTotal, is the real pickle. it calculates the student's overall semester grade using the scores (ScoreObj) from all their assignments, their associated assignment gradeWeights, curves, and maxPoints, and various other things. This gradeTotal value is displayed in a table column, along with all the students and their individual assignment grades. Determining the value of gradeTotal is a relatively expensive operation, particularly with a large class, therefore I want to run it only when necessary. For simplicity's sake, I'm not storing that gradeTotal value in the core data model. I don't mind caching it somewhere, but I'm having a bitch of a time determining where and how to best update that cache. I need to run that calculation for each student whenever any value changes that affects their gradeTotal. If this were a simple to-one relationship, I know I could use something like keyPathsForValuesAffectingGradeTotal ... but it's more like a many-to-one-to-many relationship. Does anyone know of an elegant (and KVC correct) solution? I guess I could tear through all those score and assignment objects and tell them to register their students as observers. But this seems like a blunt force approach.

    Read the article

  • How can I implement ASP.NET MVC without using Visual Studio?

    - by Cheeso
    I have seen ASP.NET MVC Without Visual Studio, which asks, Is it possible to produce a website based on ASP.NET MVC, without using Visual Studio? And the accepted answer is, yes. Ok, next question: how? Here's an analogy. If I want to create an ASP.NET Webforms page, I load up my favorite text editor, create a file named Something.aspx. Then I insert into that file, some boilerplate: <%@ Page Language="C#" Debug="true" Trace="false" Src="Sourcefile.cs" Inherits="My.Namespace.ContentsPage" %> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <title>Title goes here </title> <link rel="stylesheet" type="text/css" href="css/style.css"></link> <style type="text/css"> #elementid { font-size: 9pt; color: Navy; ... more css ... } </style> <script type="text/javascript" language='javascript'> // insert javascript here. </script> </head> <body> <asp:Literal Id='Holder' runat='server'/> <br/> <div id='msgs'></div> </body> </html> Then I also create the Sourcefile.cs file: namespace My.Namespace { using System; using System.Web; using System.Xml; // etc... public class ContentsPage : System.Web.UI.Page { protected System.Web.UI.WebControls.Literal Holder; void Page_Load(Object sender, EventArgs e) { // page load logic here } } } And that is a working ASPNET page, created in a text editor. Drop it into an IIS virtual directory, and it's working. What do I have to do, to make a basic, hello, World ASPNET MVC app, in a text editor? (without Visual Studio)

    Read the article

  • Hide jQuery Accordion while loading

    - by zac
    I am testing a site build with a slow connection and I noticed the jQuery Accordion stays expanded for a long time, until the rest of the site is loaded, and then finally collapses. Not very pretty. I was wondering how I could keep it collapsed through the loading process and only expand when clicked. I am working with the standalone 1.6 version of the accordion plugin. The basic structure : <div class="sidebar"> <ul id="navigation" class="ui-accordion-container"> <li><a class="head" href="#">1</a> <ul class="sub"> <li><a href="#">1a</a></li> <li><a href="#">2a</a></li> </ul> </li> </ul> </div> and the script jQuery().ready(function(){ jQuery('#navigation').accordion({ active: 'false', header: '.head', navigation: true, animated: 'easeslide', collapsible: true }); }); I tried to hide the elements in the CSS to keep them from appearing while loading but all that achieved is in having them always hidden. Maybe the problem is in the CSS I have a background image in each of the sub menus: #navigation{ margin:0px; margin-left: 10px; padding:0px; text-indent:0px; font-size: 1.1em; width:200px; text-transform: uppercase; padding-bottom: 30px; } #navigation ul{ border-width:0px; margin:0px; padding:0px; text-indent:0px; } #navigation li{ list-style:none outside none; } #navigation li ul{ height:185px; overflow:auto; } #navigation li ul.sub{ background:url('../images/sub.jpg') no-repeat; dispaly: block; } #navigation li li a{ color:#000000; display:block; text-indent:20px; text-decoration: none; padding: 6px 0; } #navigation li li a:hover{ background-color:#FFFF99; color:#FF0000; } Thanks in advance for any advice on how to have this thing run a little smoother and having the accordion always collapsed. -edit - I forgot to mention that I am also hoping for a solution that will allow the nav to still be accessible for those without javscript.

    Read the article

  • Nested Transaction issues within custom Windows Service

    - by pdwetz
    I have a custom Windows Service I recently upgraded to use TransactionScope for nested transactions. It worked fine locally on my old dev machine (XP sp3) and on a test server (Server 2003). However, it fails on my new Windows 7 machine as well as on 2008 Server. It was targeting 2.0 framework; I tried targeting 3.5 instead, but it still fails. The strange part is really in how it fails; no exception is thrown. The service itself merely times out. I added tracing code, and it fails when opening the connection for Database lookup #2 below. I also enabled tracing for System.Transactions; it literally cuts out partway while writing the block for the failed connection. We ran a SQL trace, but only the first lookup shows up. I put in code traces, and it gets to the trace the line before the second lookup, but nothing after. I've had the same experience hitting two different SQL servers (both are SQL 2005 running on Server 2003). The connection string is utilizing a SQL account (not Windows integration). All connections are against the same database in this case, but given the nature of the code it is being escalated to MSDTC. Here's the basic code structure: TransactionOptions options = new TransactionOptions(); options.IsolationLevel = System.Transactions.IsolationLevel.ReadCommitted; using (TransactionScope scope = new TransactionScope(TransactionScopeOption.RequiresNew, options)) { // Database lookup #1 TransactionOptions options = new TransactionOptions(); options.IsolationLevel = Transaction.Current != null ? Transaction.Current.IsolationLevel : System.Transactions.IsolationLevel.ReadCommitted; using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Required, options)) { // Database lookup #2; fails on connection.Open() // Database save (never reached) scope.Complete();<br/> } scope.Complete();<br/> } My local firewall is disabled. The service normally runs using Network Service, but I also tried my user account (same results). The short of it is that I use the same general technique widely in my web applications and haven't had any issues. I pulled out the code and ran it fine within a local Windows Form application. If anyone has any additional debugging ideas (or, even better, solutions) I'd love to hear them.

    Read the article

  • asp.net mvc & jquery dialog: What approach do I take to add items to a dropdownlist/select list with

    - by Mark Redman
    Hi, I am new to MVC and have a grasp of the basic model, but still doing everything with postbacks etc. One aspect of the UI I want to build is to have a drop-down-list of items with a button to add an item to the database and refresh the list. Achieving this with WebForms was straight forward as everything was wrapped in UpdatePanels, but what is the best approach to achieve this using MVC? Part of the markup for the list and button look like this: <table> <tr> <td><%=Html.DropDownList("JobTitleSelectList", Model.JobTitleSelectList, "(select job title)", new { @class = "data-entry-field" })%></td> <td>&nbsp;</td> <td><a id="AddJobTitleDialogLink" href="javascript: addJobTitleDialog();" title="Add Job Title"><img id="AddJobTitleButtonImage" src="/Content/Images/Icons/16x16/PlusGrey.png" border="0" /></a></td> </tr> </table> The Dialog is a standard jquery Ui dialog, looks like this: <div id="SingleTextEntryDialog" style="display:none"> <table> <tr> <td>Name:</td> <td><input id="SingleTextEntryDialogText" type="text" size="25" /></td> </tr> </table> </div> I am guessing I need to put this into a UserControl / PartialView (are they the same thing?) Also with the strongly typed View how do I pass the Model or just the SelectList Property to the UserControl or is this not the case? Nor sure if there should be form in the dialog div? or how that is going to postback via ajax. Some examples show a lot of ajax code in the page something like: $.ajax({...}); I assume doing this using jquery is more code than asp.net webforms, but there is just more code to see doing a "View Source" on a page? Your comments appreciated.

    Read the article

  • Learn C# now or finish up with Java and then learn C#?

    - by Sahat
    Ok here is my situation. I've studied Java in my college for 2 semesters. But you know they teach you jack in there, just the basics. We skipped half of our textbook and even then our professors don't teach from section to section of each chapter. I don't blame them. It's hard as it is for new students to understand even the basic concepts of programming. Now this is a community college we are talking about and not Stanford, MIT or Berkeley. So like I said I've done 2 semester of Java. I really like our textbook because it has some challenging projects to do at the end of each chapter. This textbook is pretty clear and i have no problem understanding it (although 2-D and 3-D Arrays have given me some trouble). I have tried reading a few C# books such as Pro C# 2008 and .NET 3.5 and C# 4.0 in a Nutshell. I found these books to be dry and overloaded with information that put me to sleep (No offense to the authors of those 2 wonderful, according to amazon ratings, books). Would you suggest I finish my Java textbook, brush up my knowledge of Arrays, Polymorphism, and etc that are universal to most programming languages. And then switch to C#, plus the syntax is very similar so it should be easy to switch. Or should I just start learning C# right now from the very beginning? If it's the latter then could you recommend some free online resources that will keep me engaged and at the same time teach me everything I need to know about C#. Someone has recommended me to learn .NET first, but I found it to be not the brightest idea. .NET is just a big monster full of libraries. How am I going to apply it if I don't even know the C# or VB!? Anyway back to my question: Master Java and switch to C# or just go with C#? DISCLAIMER: I don't want to start .NET vs J2EE or C# vs Java flame war. I am going with C#. I've decided that I want to work in a Microsoft shop in the future. .NET is what I want to learn. Thanks! Will be waiting for the answers.

    Read the article

  • Check my anagram code from a job interview in the past.

    - by Michael Dorgan
    Had the following as an interview question a while ago and choked so bad on basic syntax that I failed to advance (once the adrenalin kicks in, coding goes out the window.) Given a list of string, return a list of sets of strings that are anagrams of the input set. i.e. "dog","god", "foo" should return {"dog","god"}. Afterward, I created the code on my own as a sanity check and it's been around now for a bit. I'd welcome input on it to see if I missed anything or if I could have done it much more efficiently. Take it as a chance to improve myself and learn other techniques: void Anagram::doWork(list input, list &output) { typedef list SortType; SortType sortedInput; // sort each string and pair it with the original for(list<string>::iterator i = input.begin(); i != input.end(); ++i) { string tempString(*i); std::sort(tempString.begin(), tempString.end()); sortedInput.push_back(make_pair(*i, tempString)); } // Now step through the new sorted list for(SortType::iterator i = sortedInput.begin(); i != sortedInput.end();) { set<string> newSet; // Assume (hope) we have a match and pre-add the first. newSet.insert(i->first); // Set the secondary iterator one past the outside to prevent // matching the original SortType::iterator j = i; ++j; while(j != sortedInput.end()) { if(i->second == j->second) { // If the string matches, add it to the set and remove it // so that future searches need not worry about it newSet.insert(j->first); j = sortedInput.erase(j); } else { // else, next element ++j; } } // If size is bigger than our original push, we have a match - save it to the output if(newSet.size() > 1) { output.push_back(newSet); } // erase this element and update the iterator i = sortedInput.erase(i); } }

    Read the article

  • What regular expression(s) would I use to remove escaped html from large sets of data.

    - by Elizabeth Buckwalter
    Our database is filled with articles retrieved from RSS feeds. I was unsure of what data I would be getting, and how much filtering was already setup (WP-O-Matic Wordpress plugin using the SimplePie library). This plugin does some basic encoding before insertion using Wordpress's built in post insert function which also does some filtering. I've figured out most of the filters before insertion, but now I have whacko data that I need to remove. This is an example of whacko data that I have data in one field which the content I want in the front, but this part removed which is at the end: <img src="http://feeds.feedburner.com/~ff/SoundOnTheSound?i=xFxEpT2Add0:xFbIkwGc-fk:V_sGLiPBpWU" border="0"></img> <img src="http://feeds.feedburner.com/~ff/SoundOnTheSound?d=qj6IDK7rITs" border="0"></img> &lt;img src=&quot;http://feeds.feedburner.com/~ff/SoundOnTheSound?i=xFxEpT2Add0:xFbIkwGc-fk:D7DqB2pKExk&quot; Notice how some of the images are escape and some aren't. I believe this has to do with the last part being cut off so as to be unrecognizable as an html tag, which then caused it to be html endcoded. Another field has only this which is now filtered before insertion, but I have to get rid of the others: &lt;img src=&quot;http://farm3.static.flickr.com/2183/2289902369_1d95bcdb85.jpg&quot; alt=&quot;post_img&quot; width=&quot;80&quot; (all examples are on one line, but broken up for readability) Question: What is the best way to work with the above escaped html (or portion of an html tag)? I can do it in Perl, PHP, SQL, Ruby, and even Python. I believe Perl to be the best at text parsing, so that's why I used the Perl tag. And PHP times out on large database operations, so that's pretty much out unless I wanted to do batch processing and what not. PS One of the nice things about using Wordpress's insert post function, is that if you use php's strip_tags function to strip out all html, insert post function will insert <p> at the paragraph points. Let me know if there's anything more that I can answer. Some article that didn't quite answer my questions. (http://stackoverflow.com/questions/2016751/remove-text-from-within-a-database-text-field) (http://stackoverflow.com/questions/462831/regular-expression-to-escape-html-ampersands-while-respecting-cdata)

    Read the article

< Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >