Search Results

Search found 22701 results on 909 pages for 'missing features'.

Page 445/909 | < Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >

• Network based on Netgear FVS318 extremely slow

  - by Fentible

  A network I maintain uses an FVS318 as a router, with a separate switch. Communication within the network is slow. Out to the internet is even slower. As it stands there is one patch from the FVS to the switch and no other devices directly connected to the FVS because any that are run so slowly they might as well not be connected to the network. Swapping in a bog-standard home router dramatically increases network speed, but that's not a viable solution because some of the enterprise features of the FVS are required. There are quite a few complaints about this on the Netgear forum, but Netgear support have not been forthcoming with any help - so I turn to you all: any ideas?

  Read the article

• How can I offer 2.4 ghz wi-fi in a building with strong interference?

  - by user49995

  I have a few access points on one floor of a high-rise building. They support both 2.4 ghz and 5ghz. When I used 2.4 ghz, the channel management features did not seem to work and we experienced frequent problems. When I switched to 5 ghz the problems went away. However, the 5ghz standard is much less accepted. And when clients come in, they want 2.4ghz. What can I do? How can I offer 2.4ghz wi-fi in an area with a lot of interference?

  Read the article

• Can Windows 7 place a task bar on each monitor, which only shows applications running on that screen

  - by OverloadUT

  I would like to have a task bar on each of my monitors, but I only want applications that are currently on that monitor to be displayed on its taskbar. This can be accomplished using UltraMon, however the taskbar shown on the secondary and tertiary monitors is not the native Windows 7 taskbar, but rather made to try to simulate how it looks and feels. As good as it is, it is missing a ton of the features I find best about the taskbar, such as program grouping, "peeking" at applications and so forth. So I am wondering if there is a way to make Windows 7 actually display its native awesome taskbar on multiple monitors.

  Read the article

• Created a new zone in DNS manager - can't get site bindings to work in iis 7

  - by nick gowdy

  Firstly I would like to say that I am a noob when it comes to DNS, I am a web developer and I am trying to setup an intranet site for a charity. I have windows server 2008 and I installed both iis 7 and dns manager. In IIS I have this binding that works - Type: http:// IP Address: 192.168.1.9 Port: 80 Host name: My host name is empty and when I try to navigate to this website on the network, the http code is 200 and the page renders. Now if I try Host name of test.organization.intranet Internet explorer says "Internet Explorer cannot display the webpage" and the server response is aborted. In DNS manager I created a new forward lookup zone of organization.intranet I did this through the configure a dns server wizard and I created a host (A) with the same IP as the one being used in IIS. The full Host name is test.organization.intranet but it doesn't work. Maybe I am missing something obvious because it's not an area of IT that I know very well, but I am stuck for why I can't get it to work.

  Read the article

• How to configure LAMP server for iOS social/chat app?

  - by andufo

  I'm on the last developing phase of a social networking app for iOS that has a chat module. Right now I'm trying to figure out the best way to achieve these features: Send message instantly to another user. If other user is online, delivery should be instantly. If user reads the message, the remitent should be notified of that action. If a user visits my profile, I should be notified instantly. What would be, in your opinion, the best approach to achieve that experience? The server is CentOS 5.6. I've previously reviewed XMPP, sockets, but I'm still unsure on what the best approach is. Any opinions and resources will be much appreciated.

  Read the article

• Second virtual host on Apache redirects to root

  - by Slytherin

  I tried to setup my second virtual host , but I'm getting the default /var/www/index.html ( the one that says "It works!" ) I followed the same procedure as the first time, but this time it didn't work my configuration looks like this <VirtualHost *:80> ServerName messup ServerAlias messup.loc ServerAdmin webmaster@localhost DocumentRoot /var/www/messup ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> my hosts configuration is the following 127.0.0.1 localhost 127.0.1.1 SlytherinPC 127.0.0.1 AFS.loc 127.0.0.1 messup.loc After this , my apache wouldn't restart without any message , only saying [fail] , but stop and start worked. What am I missing ?

  Read the article

• Constantly visible notification and access icon for Empathy in Gnome 3

  - by aef

  Since a short while I'm using Ubuntu Oneiric Ocelot (11.10) with gnome-shell (Gnome 3) and I'm trying to get accustomed to the default Empathy Instant Messaging client. One mayor problem for me (coming from Gnome 2 and Psi) is that there is no constantly visible icon which makes it clear (for example by changing its icon or showing an animation) if there are incoming messages which I did not read already and which lets me jump into them with one click. Also I'm missing a way to bring up the contact list or hide it away with a click. I sometimes have real problems even figuring out how to even open the contact list up again. Is there a Gnome 3 extension or some other trick available to display such a notifier in the top bar? I'm talking about something just like the sound and network controls which are already located there. I know that there are notifications in the lower notification area (former system tray), but as it is only visible as I move the mouse in the lower right corner of the screen, its useless for me.

  Read the article

• git - recover deleted files from a prior commit

  - by Walter White

  I accidentally deleted some files in a prior commit and would like to recover them. How can I do this? I ran this and found exactly what I was looking for: git whatchanged --diff-filter=D At the time I made the commit, I should have committed the new/changed files only and ran a reset --hard then to recover the missing files. I have about 100 files that I need to restore. I don't want to do a straight revert as that will also undo the changes in that commit. Any ideas?

  Read the article

• How to activate Windows 8 Pro license with Releae Preview installed?

  - by Antonio

  So I'm one of the many who downloaded the Release Preview (64-bit). I now got the ISO to install Windows 8 Professional (64-bit) and a product key (note: I didn't get these from either Windows 8 Upgrade Assistant or Microsoft's web Store), everything legal. However, the Windows 8 Upgrade Assistant only gives me the option to Store my personal files which means that I'll have to say goodbye to both my Program Files and their respective configurations. I just want to input the Product Key and activate the license, why isn't this possible? Even "Add Features to Windows 8" doesn't accept the key. Do I really need to backup all of my stuff and make a clean install?

  Read the article

• Altering the Windows 7 grouping thumbnail preview

  - by russ

  I like the windows 7 grouping behaviour for multiple similar windows, except when I have multiple Explorer windows open. In this case, showing thumbnails of each open explorer window is next to useless, and I would like to know how to either: Disable thumbnail display completely (but preserve the grouping behaviour) Disable thumbnail display for a subset of programs (all explorer.exe instances) Change the number of similar programs that are open before the grouping behaviour falls back on a more sensible text preview when hovering over the taskbar icon (currently 14 or over) I don't particularly want to disable any other features of windows to get this behaviour, so disabling the theme compleletely isn't what I want to do. I definitely want to keep the grouping behaviour. Its just those thumbnail previews I would like to alter. Here are some screen shots of what I don't want, and what I do want: http://dl.dropbox.com/u/13184372/StackOverflow/BadGrouping.png http://dl.dropbox.com/u/13184372/StackOverflow/GoodGrouping.png

  Read the article

• Gentoo+urxvt+terminus: How do I change font version?

  - by gaidal

  In my Debian installation I can type extended ASCII characters such as åäö by default using the terminus font, however in Gentoo I can't get it to work so far. Nothing happens when I hit those keys, like in this thread: Missing glyphs in Terminus font, how to setup a fallback font ? But in this case I know terminus supports those characters in at least some of its versions, since it's works in Debian. So what I want is to find out how to see and choose which of the many different terminus font files is being used. I set the font in the same way on both Debian and Gentoo, using URxvt*font: xft:terminus:size=xx in .Xdefaults. Both systems use en_US.UTF-8 as default locale.

  Read the article

• TCP/IP communication between Hyper-V host and guests

  - by Tedd Hansen

  This may be a simple one. :) I have a simple Hyper-V setup with a few guest os running. The host has 1 physical network adapter with a static IP assigned to it. The guests have network adapters assigned to "Internet" (Hyper-V network) which is bound to the physical host network adapter (Hyper-V "External" connection type). I am not able to communicate (ping or anything else) between guests and host. I've checked firewall and it seems fine (ports open from anywhere still don't work). I'm trying to communicate with the hosts IP assigned to the same physical interface that the guests are sharing. Guests can communicate between them just fine. I can't seem to find any relevant setting (I might just be missing it). So my questions: How do I fix it so host and guests can communicate?

  Read the article

• Multicast File copy with Unicast responses

  - by kirbuchi

  I'm trying to do some multicast big file copies over to remote clients on the other side of a satellite link. The idea is to minimize the amount of traffic going up to the satellite. I tried using uftp without luck. The problem is that, even though we can reach clients via multicast from our central Hub, they aren't able to respond to a multicast address (it's not supported by the return link). As uftp needs to respond to a multicast address in order to report any missing packets I'm out of luck. So does anyone have any recommendations or alternatives I can use to do the trasfers? Any tip or pointer would be appreciated.

  Read the article

• Fresh Apache install can't be connected to

  - by Wayne M

  I've got to be missing something here. I have a brand new CentOS server with a LAMP install on it. My domain host (GoDaddy) has the server's IP address configured as the "A Record". Since the server will host subdomains I have enabled NameVirtualHost and set up a virtual host pointing to the web app on the server. I haven't touched anything else in Apache, and it's listening on Port 80 like it should be. However, I can't connect to the server either by DNS or by IP address. I've set up several servers exactly like this one and never run into this before. What could be causing this? Did someone on the host set up a firewall or something that blocks port 80? As I said, I can't connect to the server via anything, but it's a barebones box with LAMP installed on it.

  Read the article

• Problems connecting to a linux file server from windows 7

  - by Rister

  I have an old Windows 2000 machine that I'm trying to replace because it is freezing periodically. It is used primarily for email but it does need to be connected to the two linux file servers ("dino1" and "dino2") that are in the office. When I tried to get the new Windows 7 machine to connect I can't find the user account that was being used (or I can't log on to the share). On the old machine the users all logged in as Administrator on the local machine and entered the password ("fuzzypickels") to log onto the share. To me, it seems like the username ought to be Administrator, but when I enter that with "fuzzypickels" it gives me an error that I've got either the username or the password or both incorrect. Is there something missing in my assumptions? Or is there something I can do to recover the username from the old machine?

  Read the article

• If the WiFi switched on, should it disable the ethernet? [closed]

  - by Peter Stuart

  My friend having problems with her laptop and I am trying to help her via SMS. She can't get her laptop connected to the internet via the Ethernet connection and there is no WiFi in the area. Could it be because her WiFi is switch on, she is using an acer aspire. If she manually switches it off could that allow the ethernet connecttion to work? Or is it a missing driver? The cable works fine as her someone else tried it. Thanks Peter

  Read the article

• How can I tell if my ISP is redirecting my DNS queries?

  - by Nack

  I've attempted to use some DNS services like OpenDNS, and no matter what I do the DNS queries don't return the expected results. Watching the packet traffic on my firewall, I can see the queries go out to the intended DNS server address and responses coming back, but the results are not as expected, for example, the OpenDNS test page always fails even though the requests appear to be going to their servers. I suspect my ISP is intercepting DNS queries and sending them to their own servers. Is there a way to verify this? Is there something else I might be missing? I'm using 3G wireless service from Sprint.

  Read the article

• Windows 7 unreasonable ram usage

  - by Deus Deceit

  I have a fresh install of windows 7, and my ram in normal startup goes up to 2.5 GB. I looked at task manager, and there's at least 1.5 GB missing from there and in resource monitor as well. No indication of what's using that ram. Can someone tell me how I can find out what's consuming my memory? I believe it's a virus but none of the free antivirus programs tracked it down. EDIT I added the pictures bellow. If this is normal usage of windows 7 as some answers imply... then I don't get this at all. P.S My windows 8 Installation was running bellow 2.5 gb actually it was 1. something, until recently that I transferred some files from another computer which had the same problem that mine has now. I deleted windows 8 and installed 7, since i would do that anyway. And now I'm getting high memory usage in windows 7 as well.

  Read the article

• Win Server 2008 R2 SP1 Repair Disk

  - by Horst Walter

  Is there nothing like "creating a repair disk" for Win Server 2008 R2 SP1. Or am I just missing it? Under Win7 I do just enter "Repair" and it finds "create a repair disk". Sorry - but I am not a professional Admin. Just using the server for my development environment. If there is no repair disk, is there something similar or something I should create in case I do have a system failure? Sure, a full backup is done, but anything else?

  Read the article

• Recording Interfaces for OS X that are supported/work well?

  - by Troggy

  For os x, I would like to know what other audio production/music recording interface type products people have found to work well with os x? I do not want to know about stuff that only works. I want to know about solid products that work well and are supported well by the company when issues arise. I for example have a M-Audio Firewire Solo recording interface. I have found M-Audio to be a company with great mac support for their products and they integrate well with os x features and apple software. Clarification: I am wondering about the recording interfaces themselves, as in the hardware, that are compatible with os x and supported/work/integrate well.

  Read the article

• proxy server software for windows xp

  - by This is it

  Hi Is there a proxy software for Windows XP that can support HTTP, HTTPS, SMTP, IMAP, POP, FTP, etc. (the more the better)? We tried apache mod_proxy but FTP doesn't work through it (at least not all features). Maybe we don't need proxy server for following requirements (we are open for suggestions): - Centralized access point to internet for several users (proxy server?) - Users use Browser (firefox/IE - HTTP, HTTPS), Outlook (SMTP, POP, IMAP) - Logs to see where did users go on internet - Possiblity to connect to FTP server Windows xp, which is used as proxy server, is a virtual machine, and all other users/clients are virtual machines as well (Hyper-V)... Thanks for suggestions. Cheers

  Read the article

• Getting some garbage text when tar-ing a file

  - by Ramy

  when I run the following command: tar -c music.tar iTunes\ Music/ But I get the following garbage output. b????n5???z???V_o?P?O3|?b???i?Pl?jH??8??z5??????~D|_($?|b??:???š`?s7 ?%z\??Jj????K????Z??V?)?A4 2??}?4?(??#?P??ykX ?Q?e<?w?U????Y?8n??s? 1B??F.f? ?X9Lb=8??@????|?h?d???I??L?]??????-????gx??l????n?cs{f???f???6?M(?u??6??|pX?nH?V???$???????7??n?H???Yua??Xn?;{?JP?????7?@R?f_?j?*????3M?z?s9???"??0?$1??7:w???????|D_?????EjtO????????P?Y?-? xVF???Uwky?u?Yt?h ???K ?nJh?]K?J-?2??#Q????~?~B)O?MH?? "??6#?Q,uNG?~??4t?=^C I don't really care if I'm just missing some font library. But I haven't run this to completion because...well i'm not really sure what it's doing. any help appreciated.

  Read the article

• Raid 5 scsi fault

  - by HaLaBi

  I have no much knowledge about servers and I was looking all day around the internet about finding a solution to my raid 5 problem. All of a sudden two disks failed. The server won't boot (HP Proliant, windows 2003 R2, very old maybe 10 years old). I know that if one disk is faulty then I can add a new disk and rebuild it and things will be fine, the problem is two went faulty :( is this normal? two at the same time? is there any other thing I can do and I am not aware of? other than taking them out and reinserting them back? Windows won't boot. The Array menu shows that disks 0 and 4 are "Missing". Any other tricks or things to do? It is important because for some unknown reason the back up job did not work for a month and I just found out, so I need to make these raid 5 back online again.

  Read the article

• Domain Key Entries

  - by natediggs

  More BIND DNS questions. OK, my changes the the zone files are no propagating out. Now I'm having a problem with the domain key entries I'm trying to create. I'm starting by trying to set the domain key policy. To do so I added the following entry to my zone file (actual domain XXX'd out). Based on everything I've read this is properly formatted and should work. When I try to verify the DNS entry for our domain it doesn't how up. _domainkey.XXXX.com TXT "t=y; o=~;" Is there something I'm missing? Nate

  Read the article

• GRUB2 not detecting OS on raid partitions

  - by sleeves

  I have recently added a drive to a system and have successfully raid'ed (RAID-1) the paritions, with the exception of the boot partition. I have it ready and mirrored, but can't get GRUB2 (update-grub) to find it. System: Ubuntu 11.04 Raid Metadata: 1.2 If I run update-grub, it finds the kernel images on the /dev/sda2 partition (present root) but not the images on /dev/md127. /dev/md127 is composed of "missing" and "/dev/sdb2". fdisk on /dev/sdb confirms that sdb2 is of type fd (raid autodetect) and is also flagged bootable. I have two things I want to do. Make the boot.cfg on /dev/sdb2 have a menu option to have the root be /dev/md127 Install grub onto /dev/md127 so the actual boot.cfg from there is being used. Thanks!

  Read the article

< Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >