Search Results

Search found 16355 results on 655 pages for 'lua c connection'.

Page 446/655 | < Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >

  • Network configuration problem

    - by Musti
    in my dorm I have to change network configuration and then if it is successfull, I have to enter a user name and password for wired internet connection. Anyway, I had many attempts but I couldnt achieve, and please look at my steps and tell me if there is something wrong and at the end there is an error, but I really dont have any idea about this error. (I am a new ubuntu user, and network is far away of my interests) 1) /etc/network/interfaces auto eth0 iface eth0 inet static address 172.030.014.038 netmask 255.255.255.252 network 192.168.2.0 broadcast 192.168.2.255 gateway 172.030.014.038 2) sudo gedit /etc/resolv.conf nameserver 010.050.001.001 nameserver 010.050.001.002 3) /etc/init.d/networking stop Deconfiguring network interfaces... [ OK ] 4) /etc/init.d/networking restart Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces Reconfiguring network interfaces... 172.030.014.038: Unknown host ifconfig: `--help' gives usage information. Failed to bring up eth0 Note: IP-address, netmask, gateway, Preferred DNS server and Alternate DNS server ara given by the management of Dorm. It wad very easy in windows but I couldnt achieve in Ubuntu. I also tried to edit from "edit connections" but the save button is gray and I cannot save it. Thanks in advance. / Musti

    Read the article

  • Virtual Network Printer

    - by user113720
    I'm pretty new to Microsoft Servers so don't blame me if the question isn't that smart [I'm a Unix guy]. I need to install a Virtual Printer of a Microsoft Server 2008 r2. The requirements are: The printer must print on a file {whatever file... txt or pdf } The printer must run on a server The printer must accept plaintext from a specific IP:port The connection between the device that prints and the server is a local network I've tried to install a virtual printer, but I cannot specify the constraint about the socket from which receive data to print. Thank you so much

    Read the article

  • LPR command won't recognize CUPS printer

    - by Datapimp23
    I have a cups server with one shared printer configured on it. It prints test pages without problems. printername (Idle, Accepting Jobs, Shared) Description: desc Location: Driver: Zebra ZPL Label Printer (grayscale, 2-sided printing) Connection: socket://172.20.50.26 Defaults: job-sheets=none, none media=oe_w288h432_4x6in sides=one-sided This is the output from lpstat -t. it shows that the printer is idle and accepting requests admin@SERVER:~$ lpstat -t scheduler is running no system default destination device for printername: socket://172.20.50.26 printername accepting requests since Thu 26 Jan 2012 01:29:35 PM CET printer printername is idle. enabled since Thu 26 Jan 2012 01:29:35 PM CET Now when I want to send a printjob to it via an LPR command it won't recognize the printer /usr/bin/lpr -P printername test.pdf Result lpr: ttn_seg_zebra1: unknown printer What am I missing here ?

    Read the article

  • How to block spam site republishing my content

    - by Fo.
    I noticed today that Google search results shows some spam copies of one of my sites. The url looks something like this: http://[subdomain].spamsite.com/www.example.com ...where example.com is my site. In my Apache access logs I'm noticing several lines like the following whenever I load the above url: 127.0.0.1 - - [219/Oct/2012:19:27:34 +0000] "OPTIONS * HTTP/1.0" 200 - "-" "Apache (internal dummy connection)" The spammer's site shows an exact up to date copy of my site, so I think they are pulling in live data. Any idea how I can block this traffic?

    Read the article

  • Trying to turn an WD Mybook 1TB to slave drive in PC

    - by Steph W
    Yes I realise that most external Hard Drives would not be transitioned into internal sitting Hard Drives, but unfortunately we broke the miniUSB connection that transfers the data from external Hard Drive to laptop. What we are TRYING to do now, is get the WD MyBook 1TB to funtion alongside (preferably as SLAVE) to my currently exsisting Desktop Hard Drive. both are SATA drives. We have the SATA power, and Data cables, and these are in place (but - somehow NOT working) - Help please - I am not computer illeterate, just don't know how to switch this so it works. How do I turn one into master, and the newer one (that was external) into the slave drive?

    Read the article

  • Network on linux server is periodically down

    - by Fabian
    I have an old server running Fedora 4 that occasionally just stops responding via network for about an hour. This happens 1-2 times a week. Also no connection from the server itself to any other computer on the network is possible when it happens. The network settings and routes look fine. There are no unusual log messages and no unusual processes running at that time. If I restart the network or just do an ifconfig eth0 down & ifconfig eth0 up it works fine afterwards. I know that the server should be updated to a currently supported OS, but that is not really an easy option right now. Any ideas on how I could diagnose and fix that problem?

    Read the article

  • Install a i386 printer driver into an amd64 distribution or how can I find a good printer based on features?

    - by Yanick Rochon
    Hi, I just bought a Lexmark Interpret S408 all-in-one printer. The box said that it supported Ubuntu 8.04, but I told myself it should work with Lucid... well no. The only driver I have found is for i386 while I have a amd64 image installed; the architecture is incompatible. So, the quesiton is : Is it possible to install that driver anyway, somehow? Or do I need to take that printer back to the store and buy another one? If the latter is the only alternative, I need a printer that has wireless connection capability can do color printing is of good price (less than $200 CAD) Thank you for your answers, help, and tips. ** UPDATE ** The driver was given in the form of deb package (for Debian distributions) and I managed to extract the actual deb package driver out of the install program. I ran sudo dpkg -i --force-all lexmark-inkjet-09-driver-1.5-1.i386.deb and the driver installed, and I was able to print something out. But that pretty much ends there; I cannot access anymore of the printer settings, etc. (i.g. scanner, fax, wifi settings, etc.) I should suffice for now as I'm satisfied with the printer's features (and size, and prince), but if I could have a full-linux-supported printer like that one, I would return this one in exchange for the other.

    Read the article

  • Wi-fi signal with keeping the internet cable

    - by daGrevis
    So the situation is that I have Ethernet cable which provides internet to my computer. Thing I want is to have wi-fi connection in my house and Ethernet cable (like I have before) to use for my PC. I will use wi-fi for my laptop and mobile phone. I think I need router for that and I'm looking at Asus RT-N16 (suggested in Coding Horror) for it, but I am not sure. Is it the right thing for me and I will be able to get wi-fi signal and keep the Ethernet cable? I guess the system will be that current cable goes into router, router provides wi-fi signal and gives back new cable... or something like that. Thanks in any advice! And sorry if topic isn't in right site.

    Read the article

  • CGI error from PHP when running exec() on IIS

    - by Patrick
    Windows Server 2003 x64 PHP 5.2 IIS 6.0 The program Ink2Png.exe is set with Everyone-Read and Execute permissions. As does its dependency (microsoft.ink.dll) PHP Safe Mode is off exec() is passed [the full exe path], space, [full path to another file] This other file also has full read permissions. The output directory has full write permissions. As soon as exec() is hit, the connection dies, the browser does not even receive a full set of http headers, and it reports a CGI error. Examining the output, it appears the program was not even run. Any ideas? How can I figure out what exactly is happening and get it running again? EDIT: Also, it is a .NET application, if that is significant in any way.

    Read the article

  • unable to connect to remote sql server from SHDSL router

    - by user529265
    Got a new leased line network to our office that came with a SHDSL router (Watson). Currently, we are unable to use Sql Server management studio to connect to remote Sql databases. It errors out saying A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: TCP Provider, error: 0 - The specified network name is no longer available.) (Microsoft SQL Server, Error: 64) I logged into the Watson management panel and unblocked all the ports for TCP traffic (specified the range as 0 to 60000 and UDP as well - this include 1443 required for connecting to SQL Server). The router is the only thing that has changed. We are able to connect to it from other networks just fine. Is there something we are missing here. Any help would be greatly appreciated.

    Read the article

  • ISP issue browsing "sonos.com" - need to diagnose and prove [closed]

    - by john
    I am unable to browse to a website "sonos.com" with my ISP (virgin). I have ruled out browsers, PCs, macs, routers, wifi, etc. Other ISPs (even other virgin connections in different areas!) supply this site no problem. I am 99% convinced there is a DNS issue lurking here. There is something fishy about the DNS for the site : What I notice is that online DNS sites tell me the right IP address for "sonos.com", but not for "www.sonos.com". Anyway when I type "sonos.com" the browser (any/all of the 4 I tried) fail to display the page. Firefox gives a "connection was reset" error. If I browse to sonos.com using the IP address it works OK. Browsing to www.sonos.com or sonos.com works fine with other ISPs of course. Questions: 1 Does anyone have any idea what might be going on here? 2 Any suggestions as to tools/monitors to help investigate/prove what is going on I can then take this up with virgin and/or sonos. Thanks

    Read the article

  • Accidentally ejected my Verbatim drive and can't get the icon back

    - by Erin
    Hi, I have time machine running on my iMac OSX v10.5.8 and also have a Verbatim 1TB attached that I use as a workspace/scratchdisk so I can manipulate large music files before I transfer them. However, when cleaning behind my computer the other day I think I dislodged the connection (or maybe one of the kids hit the eject button, i don't know) however, I've re-booted many times and it's not reconnected. It doesn't appear in my disc utility windown and I don't know how to get the icon back! I've looked in time machine but it doesn't appear there at all (cos it's not supposed to I think - it's not connected - my mate hooked it up for me and he won't return my calls!). Help. I don't know how to get it back! Sorry for being a plank.

    Read the article

  • Why such a dramatic difference in wireless router max. simultaneous connections?

    - by Jez
    Recently, I've needed to look into buying a wireless router for a mission-critical system at work that will need to support quite a few simultaneous connections (potentially a few hundred laptops). One thing I've noticed is that there seems to be a dramatic difference between the max. simultaneous connections different routers can support; see this page for example - anything from 32 to 35,000! Why is there this degree of difference? You'd have thought that if we know how to make routers that can handle thousands of connections, we wouldn't be making stuff that's limited to a pathetic 32 anymore. Is it a firmware thing? A hardware thing? Are low-end manufacturers purposely putting low arbitrary connection limits in so people can be "encouraged" to pay more for high-end routers?

    Read the article

  • What should I do when the GETDEB repository is down?

    - by 13east
    I'm trying to install programs/files from the getdeb repo but get a "check your internet connection" error. Programs than I've tried include Qbittorrent and Mozilla-Plugin-VLC. Through the terminal I get the following errors: Err http://archive.getdeb.net/ubuntu/ natty-getdeb/apps qbittorrent amd64 2.8.2-1~getdeb2 Could not connect to archive.getdeb.net:80 (209.105.191.78). - connect (113: No route to host) E: Failed to fetch http://archive.getdeb.net/ubuntu/pool/apps/q/qbittorrent/qbittorrent_2.8.2-1~getdeb2_amd64.deb: Could not connect to archive.getdeb.net:80 (209.105.191.78). - connect (113: No route to host) & Err http://archive.getdeb.net/ubuntu/ natty-getdeb/apps mozilla-plugin-vlc amd64 1.1.10-1~getdeb1 Could not connect to archive.getdeb.net:80 (209.105.191.78). - connect (113: No route to host) E: Failed to fetch http://archive.getdeb.net/ubuntu/pool/apps/v/vlc/mozilla-plugin-vlc_1.1.10-1~getdeb1_amd64.deb: Could not connect to archive.getdeb.net:80 (209.105.191.78). - connect (113: No route to host) I'm not having any problems adding/removing other programs/files from my machine. Is there a problem with GETDEB repo (and if so, is there any way to fix it on my end) or is there something wrong with my computer's configuration?

    Read the article

  • NAT Policy Inbound Source Problem on SonicWall TZ-210 with Multiple DSL Lines

    - by HK1
    We recently added three more DSL connections to our SonicWall TZ-210. My NAT Policies work fine as long as I leave them set with an inbound interface of X1, which hosts our original DSL connection. However, I'd like to change some of the NAT Policies to use inbound source/interface X2, X3, X4 or Any. In my initial tests, when I change one of the policies to use an inbound interface of X2, that port forward policy does not work at all. Traffic never makes it to the internal destination. What could be the problem?

    Read the article

  • Wireless dropouts that only affect subset of devices

    - by jwaddell
    When watching videos streamed over WiFi from a NAS box (D-Link DNS-323) I am getting wireless dropouts. However they only appear to occur when I have left my laptop (Dell Inspiron 9300 running Windows XP SP3) running; the laptop is usually suspended if I'm not using it. The dropouts have occurred when streaming to a Netgear EVA8000 streaming device, and also to a PS3. I'm using a Netgear DG834G as the wireless modem/router. When a dropout occurs I go to the laptop and see that its wireless connection has also dropped out. The odd thing is that my wife's MacBook and my iPhone still maintain their connections. What could be causing this behaviour, and how do I go about fixing it?

    Read the article

  • Internet problems

    - by dan
    I've got problems on my freshly installed windows Xp machine. I cannot connect to the internet and I've tried various 'solutions' provided to me by the help and support center. Surprisingly none of them worked... Anyways, I've got 3 pc's next to me sharing a lan which is connected to the internet though a modem. The computer I use right now uses windows xp aswell and runs without any problems. I've tried everything on not working computer. I've ran the connection wizard several times, but it's not working :( Also I've very little experience with this version of windows, so I'm sorry if the solution is obvious.

    Read the article

  • teamviewer display is slow to refresh

    - by brunoais
    I'm using teamviewer from time to time to connect my portable computer with my desktop computer when I need to check on something (personal use). One of the main things I've been noticing is that it is quite slow transfering the screen updates that keep happening. This happens more frequently when I'm moving full windows or when I open a window or when watching a small movie clip. I've tested the lowest maximum p2p speed I ever got in the last week between both and it is the desktop's upload speed of 6MB/s with the ping of 40ms (usually ~15 ms). With this I was expecting to have very sharp image and fast transfer speeds which is not what is happening. Just to clarify, both computer's individual core's CPU is not reaching its peak (25%) while teamviewer is active, so the encryption and decryption is not the cause. Why my connection between both computers so slow?

    Read the article

  • Feeding the kernels entropy source from other machines and/or increasing its maximum size

    - by David Spillett
    We have has a little trouble with a small box that acts as a VPN end-point and mail relay for our network, caused by the available entropy for /dev/random being too low (which causes TLS connection attempts by exim to fail). The machine doesn't do anything else, so the normal feed into the entropy pool (interrupt timings from things like disk access) is not enough. As a quick hack I've set a looping script that reads from /dev/hda at a couple of Mbyte/sec which keeps it topped up. Other than buying a hardware RNG, is there a clean way of piping data for entry from elsewhere, such as a copy of the data our file server uses for its entropy source? I've spotted several tips for using rng-tools to feed it from /dev/urandom on the same machine but that "feels dirty". Also, is it possible to increase the maximum pool size? It currently seems to max out at 3585.

    Read the article

  • Ubuntu based VPN server behind NAT router?

    - by maartenn88
    I have a small intranet- and file-server inside our company, which can only be reached from inside our own network. I'd like to be able to reach the intranet and files on the server from outside the network, however I don't really like the idea of completely opening security by forwarding the ports on our NAT-router, so I'd prefer to enable a VPN possibility for this. So I have a router, which is the DHCP server and has NAT function, and I have an Ubuntu Server with the files and intranet on it. How do I configure these two so that I can make a VPN connection with my network in order to reach the server? thanks in advance for any answer!

    Read the article

  • Laptop is super slow on network

    - by Gary
    So on our network we have a bunch of wireless macs and window Operating laptops, we have a network setup with 802.11g,b,n. All the laptops seem fine except one which is only getting speeds of 54Mb. I have changed the encryption from AES to TKIP and reset the connection, i have updated the drivers, tried plugging it into the LAN and still same slow speed. Apparently the laptop with the slow speed is fine on other networks. I don't know what to do, can anyone help me?

    Read the article

  • How do I analyze an Apache Bench result?

    - by Alan Hoffmeister
    I need some help with analyzing a log from Apache Bench: Benchmarking texteli.com (be patient) Completed 100 requests Completed 200 requests Completed 300 requests Completed 400 requests Completed 500 requests Completed 600 requests Completed 700 requests Completed 800 requests Completed 900 requests Completed 1000 requests Finished 1000 requests Server Software: Server Hostname: texteli.com Server Port: 80 Document Path: /4f84b59c557eb79321000dfa Document Length: 13400 bytes Concurrency Level: 200 Time taken for tests: 37.030 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 13524000 bytes HTML transferred: 13400000 bytes Requests per second: 27.01 [#/sec] (mean) Time per request: 7406.024 [ms] (mean) Time per request: 37.030 [ms] (mean, across all concurrent requests) Transfer rate: 356.66 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 27 37 19.5 34 319 Processing: 80 6273 1673.7 6907 8987 Waiting: 47 3436 2085.2 3345 8856 Total: 115 6310 1675.8 6940 9022 Percentage of the requests served within a certain time (ms) 50% 6940 66% 6968 75% 6988 80% 7007 90% 7025 95% 7078 98% 8410 99% 8876 100% 9022 (longest request) What this results can tell me? Isn't 27 rps too slow?

    Read the article

  • Windows Server 2008 r2 FTP blocking outside connections

    - by nbon
    I have a windows server 2008r2 running IIS 7.5. I am trying to setup a FTP-server in IIS but I'm running into some annoying problems. Setting up the server works fine but when I try to connect from a remote client the connection times out. I have tried to connect to the FTP-server from the localhost and it works flawlessly. I figured that it should be some trouble with the firewall so I went into firewall settings and disabled the Public Profile and my remote connections worked! In my inbound rules there are rules for FTP-connections to allow all profiles etc. I guess they are made automatically when setting up the FTP-server. Anyone got any idea how to allow remote connections without turning off the public firewall?

    Read the article

  • Allowing access to MPD from local network

    - by August Karlstrom
    I have successfully installed MPD (Music Player Daemon) on my desktop computer. Everything works fine when the client runs on the same machine as the server. Now I would like to access MPD from my laptop computer which is connected (wirelessly) to the local network. In order to allow access to MPD from any computer on the local network I have added this line to /etc/hosts.allow: mpd: .local and restarted MPD. Still I get the message "error: Connection refused" when I try to access MPD with MPC (Music Player Client) from my laptop. Any clues or troubleshooting hints?

    Read the article

  • How do I set my router up to authenticate with my service provider?

    - by João Lourenço
    Currently I have this setup: D-Link DSL2640U connected to the phone line: VPI/VCI 0/40, Service Category UBR Without PCR Service pppoe_0_40_3 Interface nas_0_40 Protocol Bridging (LLC/SNAP-Bridging) 802.11q not enabled Bridge Service Enabled Computers have individual PPPoE connections (in Network and Sharing Centre - Set up a new connection or network - Connect to the Internet - Broadband (PPPoE) - Username and Password) How would I move these settings on each individual PC to the router so that all I need to do is connect to the wireless? I have been unsuccessful setting up anything other than Windows PCs on the network (I have tried Macs, iOS and Nokia SmartPhones too). Thanks for the responses in advance!

    Read the article

< Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >