Search Results

Search found 62172 results on 2487 pages for 'windows networking'.

Page 447/2487 | < Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454  | Next Page >

• Windows 7 Synchronize folders BUT while some files are open

  - by Nick

  I need some way to synchronize 2 drives I have. I want to do this ofter (once a day or so) There is the main drive that I want to clone/synchronize on a backup hard disk. The problem is in that there is an open TrueCrypt file mounted as a drive, and its live. If you don't know what true crypt is, basically you create a file on a hard disk and that file is encrypted. It's constantly open and modified live. Also Its pretty large. 100GB + I will use freefilesync . There are many tools that can do that. My question is, is it safe to copy the encrypted file while its open ? Does the software freeze the file in one state and copies it ? Or will I get a corrupted file on the other drive ? It was not clear to me how windows handles that. I read something about shadow copy, and the software says that it supports this. Does anyone know something on the matter that can help me ? or some software that will work ok in my scenario ? Thanks

  Read the article

• Windows 7: resizing the 'Save As' window

  - by Mark Miller

  I do not know whether my question is appropriate for this forum. Apologies if it is not. I am running Windows 7 Professional with Service Pack 1 on a Dell Vostro 460 PC. I am downloading journal articles from the internet and saving them as *.pdf files. Somehow I unintentionally clicked a button that resulted in the 'Save as' window filling the entire screen of my computer, except for the toolbar at the very bottom. How can I resize the 'Save as' window so it only fills perhaps somewhere around 25% of the computer screen, or whatever the default size for that window is? I have searched the internet extensively and found one or two threads about this problem, but no specific solutions were posted there. One suggestion was to grab the bottom of the window with the mouse and scroll upward until the window was the desired size. That does not appear to be possible in my case. Another suggestion was to click on the window with the middle mouse button before attempting to resize the window, but that does not appear to help in my case either. Thank you for any help. If I should post this question in a different forum here please let me know, or kindly migrate the question to the appropriate forum. If additional information is necessary before a solution can be attempted, please let me know that as well.

  Read the article

• Different behaviour when running exe from command prompt than in windows

  - by valoukh

  Forgive me if I'm not using the correct terminology here but I'll try to explain the issue I'm having as best I can! We use a program that allows you to view video footage from several cameras, and it works in such a way that when it is opened it then automatically loads several video files within its interface. These video files are stored in a subfolder, e.g. "videos\video1.asf", etc. I didn't create the program so I can't say what method it uses to open the files. The files are stored on a network server and are being accessed via a share/UNC path. When the file is run from windows explorer (by navigating to the network share and double-clicking the exe), it works perfectly. When the file is run via the (elevated) command prompt (e.g. by typing the \server\path\to\file.exe) it opens, but the corresponding video files do not load. I am trying to create a script that launches the program via the command prompt, so the first step is finding out why the two actions above have different consequences. Any advice on how running executables from the command prompt could produce a different result would be greatly appreciated. Thanks

  Read the article

• Windows Server 2008 Alerting to Low memory

  - by t1nt1n

  I have a file and print server running on Windows 2008 R2 fully patched in a VSphere environment (ESXi 5.1 fully updated). Every evening between 19:20 and 19:30 our monitoring software reported that the available memory is 1% and performance is dire. There is nothing in the event logs to point to an issue. At this point in the evening I am general the only user on the system to check to see why these alerts are going off. Things I have done; Checked to see if any backups are running – None at all. Checked Scheduled tasks – None before or during this time period. Moved the VM to another host. AV is disabled to rule out that as the issue. The server does not have any problems during the day with memory when fully loaded with about 50 users. The server did have 4GB ram provisioned but I have increased this to 5Gb. Running PrefMon at the time (I will save the graphs tonight) There very little CPU usage at the time but RAM usage goes up.

  Read the article

• Windows Phone 8, Windows 8 : un seul et même Core, l'OS mobile de Microsoft s'ouvre au C/C++ et à Direct X

  Windows Phone 8, Windows 8 : un seul et même Core L' OS mobile de Microsoft s'ouvre au C/C++ et à Direct X Microsoft a officiellement parlé pour la première fois hier soir de la Plateform Preview du prochain Windows Phone 8. Avec une surprise qui n'en était presque plus une : l'OS et Windows 8 s'appuieront sur un même « Shared Windows Core ». Par « Core », Joe Belfiore ? responsable de la plateforme de Windows Phone - a précisé sur la scène du Windows Phone Summit de San Francisco que ce rapprochement concenrnait le Kernel, les drivers, la sécurité, le Networking, le système de fichiers ou la gestion des médias. Sans oublier, bien sûr, les outils de développem...

  Read the article

• Windows 7 - "Magic" frequent folder

  - by TheAdamGaskins

  Every week, I export an mp3 file from audacity into a folder with that day's date (e.g. this past sunday I exported the file to a folder named 20130609). Then I close everything and that's it for a while. Then, I come back a few hours later to upload the file to ftp. I usually have some folders open, so to open a new one, I right click on the folder icon on the taskbar... to open a new folder window and browse to this folder I just created, right? Well I look up a little bit and: So I click it and upload the file, and it actually saves me 30 seconds, which is really awesome... but what in the world? It happens every single week without fail. I create the folder inside the audacity export window. The folder stays on the frequent list until I create a new folder the following week. This was definitely not an advertised feature of Windows 7, and it's extremely handy... but it really just seems like magic to me. How does it work?

  Read the article

• What's wrong with closing applications on Windows Mobile?

  - by balpha

  As far as I can tell, this annoys the crap out of people that do notice and (at max) gives no real benefit to people who don't notice: Why did Microsoft decide to make the "X" on Windows Mobile (or CE before that) not close, but only hide the application, and thus keep cluttering up your memory? WM wants you to go to the Control Panel - Memory and "Do you really want to" shut down the app. Pretty much every WM application I've seen that did not come from Microsoft has a "Quit" menu choice. The number of task managers out there that let you quit programs is larger than the count of emails from African bank managers that want me to take care of some millions of bucks that belonged to a deceased customer of theirs. My new HTC even comes with a close-able (not closeable, though) task manager pre-installed. But still today, Word Mobile just wants to hide, not be closed. I don't want to get a "That's M$hit, get used to it" answer; I really want to know: What in the world is the reason for this decision, and even more, for still sticking with it?

  Read the article

• Windows 7 Taskbar Icons Randomly Disappearing

  - by Ryker

  This is a problem that i'm totally stumped on. Taskbar Icons that are pinned, as well as open program thumbs keep disappearing. This is totally random, no set pattern. I've tried updating drivers for the vid card, rolling back to old drivers, nothing seems to work. I've also tried the usual uncheck hide the taskbar and recheck, changing the start menu, keeping commonly used programs in start menu, etc. This is using an add-in card which is a necessity. Here is the specs on the machine: New Dell Optiplex 390 i3 2100 Proc 3gb Ram, Windows 7 32-bit. The add in card is an Nvidia 8400 GS model. I've tried different versions of the 8400gs, from MSI, or from other manufactureres and regardless it keeps happening. After the Icons disappear, I can log out and log back in and they return, but disappear again. I can reinstall the drivers for the vid card and it fixes it for a few days, and then they disappear again. There isn't any set pattern of days that it happens, software being used, etc. Another user in the office had the same problem with the exact same machine, but updating the vid card drivers fixed the issue. Anyone?

  Read the article

• Windows 7 VM log on lockout

  - by AKa

  My Windows 7 XP Mode virtual machine has just locked me out of password log on. Two years of use and it never required I use a password on wake up, I never asked for that. Suddenly yesterday, password required! I located password and used it successfully a couple of times, but now even that is not good enough! Perhaps (unfairly) because I tried to get to the bottom of the new phenomenon and removed the password from the user accounts? Permissions are still set to ok for all users. I have been all the way through the settings I can access with the VM file hibernated, and have deleted the previously saved log on info, which always previously worked automatically as charged. Now when I attempt to log on it asks me for credentials, seems like progress, but when I offer them, and check the "remember my credentials" box, I still get the splash screen "The system could not log you on. [reminder about caps...]" !! Round and round. Back up and restore point versions of the VM toss me back into the same log on loop. There are no other machines on any network, I am the administrator and sole user. It must be specifically about the log on, a speck of dust corruption ... is there a way around this? I tried creating a new VM but the black inner box gets stuck at one point requesting I insert a boot disc. Thanks for input, AKa

  Read the article

• Can no longer duplicate display to external monitor on Windows 7

  - by rbeier

  We have a large TV at work - I connect my laptop to it to share my screen during meetings. Until today, my laptop display has been duplicating to the TV automatically when I connect the TV cable to the laptop. The display resolution would decrease automatically to be compatible with the TV. Today, however, it's stopped working. When I connect the cable to the TV, the display extends rather than duplicating. Using the Win+P key combination (or Fn+F7 on my Lenovo laptop), I can choose to duplicate the display - but when I do this, it ends up only displaying on the laptop. I can get it to display on the TV by hitting Win+P and choosing "projector only", but then I can't see what I'm doing on the laptop screen. I have a Lenovo W520 laptop running Windows 7, connected to the TV using a DisplayPort-to-HDMI converter cable. The TV's native resolution is 1280x720; the laptop's native resolution is 1600x900. I've tried booting with the TV cable already connected; I've tried manually lowering the display resolution on the laptop to 1280x720 before duplicating the display. Neither works. Does anyone have any other suggestions?

  Read the article

• 100% CPU use when new usb device plugged in - services.exe / Windows Server 2003

  - by Will3265

  On my server I am trying to install a new usb drive but all that happens is that the system starts using huge amounts of processor cycles with services.exe. On closer inspection with process explorer there is a thread called umpnpmgr.dll using most of the services.exe processor time. I left it for a half hour and still nothing happened. Rebooted and tried again, same result. Tried a different usb drive, then a flash drive but still same issue. Tried updating driver but it said the update function was already in action. I have used process explorer to kill the thread now so the server can still perform its intended functions. Any device that was previously installed before this began happening will still work but any device new to the system will not. My question(s) is/are: Is there a way to manually install the device into the registry so Windows thinks it is a previously installed device? Or can this problem be repaired through anything other than a reinstall? To do a reinstall would mean backing up large amounts of data which is hard with a usb drive and insufficient space on all other network machines. Any help would be greatly appreciated. William

  Read the article

• Diagnosing permission problems with Cobian Backup to network share

  - by DaveBurns

  I'm running the latest Cobian 11. I have a Synology DS412 NAS. All of my machines (Mac and Windows) access this just fine when I'm logged in and I browse to it manually. I have Cobian installed as a service on two Windows machines: WinXP SP3 and Win7 x64. On both machines, the service is set to log on with my user account which is in the Windows administrator group. Backups on both machines fail with the message "Couldn't create the destination directory "\nas1\backups\foo\bar\": The filename, directory name, or volume label syntax is incorrect". I have tried setting the NAS's share to allow anonymous read/write access but it made no difference. Although I want the backups to run unattended in the middle of the night, I have tested them by running them manually while I'm logged in but no luck. Before starting that, I make sure that I can browse to the NAS with Explorer to ensure that any authentication session with Windows and the NAS has not expired. Still no luck. I have tried creating that destination directory both on the NAS before the backup and deleting it so the backup job could create it with the client's credentials but no luck. The usual answer in the Cobian support forums is that there is a permission problem. I agree. But at this point, what can I do to diagnose this further?

  Read the article

• Debian network bridge configuration - /etc/network/interfaces

  - by Mathias

  I'm running a Lenny Xen dom0 hosting multiple virtual machines in a routed IP setup. To get an additional private subnet, I created the bridge xenbr0 in the dom0 with the following commands: brctl addbr xenbr0 ifconfig xenbr0 10.0.0.1 netmask 255.255.255.0 ifconfig xenbr0 up This works as expected, and domU interfaces are added to the bridge by Xen on VM start. My only problem is: how the heck do i specify this configuration in /etc/network/interfaces that it remains permanent and the bridge is available after a reboot? I tried the following config as found on a lot of tutorials: auto xenbr0 iface xenbr0 inet static address 10.0.0.1 netmask 255.255.255.0 network 10.0.0.0 broadcast 10.0.0.255 bridge_stp no I get 2 different errors, depending on if the bridge already exists or not. If it doesn't exist: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). SIOCSIFADDR: No such device xenbr0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device xenbr0: ERROR while getting interface flags: No such device xenbr0: ERROR while getting interface flags: No such device Failed to bring up xenbr0. done. And if it exists: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces xenbr0 8000.000000000000 no root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). RTNETLINK answers: File exists Failed to bring up xenbr0. done. Could anyone point me in the right direction please? The bridge works fine when created manually, i just need the right config file entries. The most tutorials I found add some devices to the bridge in the config, is that maybe the problem why it is not working? I don't have any interfaces I want to add to the bridge on creation as they get added later on VM start... Thanks, Mathias

  Read the article

• Setup shared internet connection on virtualbox with fixed IP

  - by Tom

  I am a web developer and until recently I have been using ubuntu as my OS. For many reasons, I have switched back to windows. I still want to keep my server on linux platform, so I setup my local server as a virtual machine. Everything works great, but i have a little struggle with the networking. Since I am working in different places and going around clients, I connect to all sorts of network with different settings. That means the possible IP range is very dynamic which causes issues when I work on my local server. At the moment I have a dynamic IP on my host and static IP on my guest. That way I can access the server from my host (by adding record to hosts file). I also have internet connection on the guest. But once i change networks, it does not work (assuming the network has different configuration). My question is, how to setup host-guest networking, so no matter what network I connect to, I can keep my static IP on guest, which is registered in hosts file on my host so I can access the webserver and also I will have internet connection on the guest? Hope it make sense. Thank you

  Read the article

• VPN with VLANs? [closed]

  - by Craig

  As usual, I'm sure I'm in way over my head on this one. My networking skills are limited; so, bear with me if you will. What I have are a few testing servers at my house as well as at a friends house that I want to link together so they can see each other (VPN right? I've done those before). We want to be able to see all the servers and work with them from either location. All the servers also need to be able to see each other. But, we don't want to see each others PCs, printers, PS3s etc. How do we pull that trick off? Multiple VLAN?... subnets?... what? If hardware matters, I have an old PC I was planning on loading pfSense onto because my current el-cheapo router doesn't support VPN. The VPN linking the houses is about the only thing I'm sure on. Beyond that, I'm lost. I'm not a complete noob; but, like I said, I'm not so sharp with the more complex networking. I do however read well... So use lots of descriptive words and feel free to link away to long dry articles if necessary. :-)

  Read the article

• Having an issue trying to get Gigabit speed across my network (Ubuntu Server)

  - by user94217

  I've just started looking into the network speeds at my office, the entire network is setup to be "Gigabit". This includes Gb switches, Gb Network cards and Cat 5e cabling. I'm not expecting the full speed, I just want more than ~90 Mb/s. I've been running some tests with iperf the linux tools and checking the hardware with ethtool. I have 3 servers and when doing my checks/test I discovered that the two backup servers can access each other at around 450 Mb/s but when using either one of them to connect and test the main server, I only get the 90Mb/s even though ethtool shows the networking card running at 1000/Full. The only difference between all the server/networking cards is the "Port" which ethtool shows. On the two backup servers the "Port" is shown as MII yet on the other it's shown as "Twisted Pair". When using ethtool -s to manually set the "Port" to MII on the main server, it looses all connectivity and does not show "Speed" or "Duplex". Anyway, Am i doing something wrong? Is there a specific reason my main server cannot use Gb when there appears to be no difference except the "Port"?

  Read the article

• Automatic switching of network card when vm is moved

  - by spock

  I have two hosts in a pool and I used to be able to move the vm around and they will start without any problem. But after I played around with some network setting, which I don't remember what, I started getting "This VM needs storage that cannot be seen from that server" message. As you can tell I am a beginner with Xenserver. Here is the very simple environment: 2 host servers with their own local hard disk and network card. One is a Pool master. Problem: Power off a vm and move vm from one server to another, or clone one vm to the other server. It used to be able to start up right away. Now, I need to delete one of the network that does not belong to the server, then it will start. Otherwise, the above error msg popup. The two networks (one for each network card in each host) are in the Networking tab of the vm, as well as in the host's networking tab. I googled but all I got to empty the DVD drive, which is not the problem here. Thanks in advance!

  Read the article

• Setting up a server that routes local traffic through vpn, while still being able to access internet directly

  - by Kazuo

  The goal is to setup a local server that routes local traffic through an uncontrolled remote vpn service while still being able to access the internet directly (not tunneled via vpn) and provide services through that direct connection. It is supposed to look like this: http://i.stack.imgur.com/74dGC.png Note: There is another router with modem between the local server and the internet. What is the easiest (best?) way to get this network setup working? I'm planning to setup the connection between the local router and the local server with simple ip forwarding. The problem now is that all the server's traffic is routed through the vpn tunnel as soon as I connect the server's openvpn client to the remote service so there is no direct internet connection available. My first idea was to setup a virtual machine (lxc container or something) and run the vpn client and local networking stuff in the vm. So that the vm receives all the incoming traffic from the local router and tunnels it through the vpn. This, as far as I understand, should not affect the physical server's network connection and should allow it to provide services to the internet. Before I start trying to set this up (I don't have much experience in networking), is there any easier or better way to do this? I would be thankful for every suggestion. Edit: Let's say the interface connected to the internet is eth0 and the interface connected to the local router is eth1. Another idea would be to create a virtual interface eth0:0 and specifiy it as openvpn's local endpoint and then force any traffic coming from eth1 through eth0:0. I'm not sure how I would force the traffic through eth0:0, though (possibly by adding routes).

  Read the article

• What is wrong with my home network? (Routing and connection issues)

  - by David

  I have a corporate laptop that was provided to me by a client and I'm having some rather odd difficulties with it when I put the laptop on my home network. When I first brought the machine home it behaved like any other laptop. Once it was connected to the network it was assigned an IP address and I could remote into it just fine using the machine name. Lately though, whenever I put this laptop on my network I am not able to ping or RDP into the machine as the host name doesn't properly resolve. Additionally I'm able to see the device and it's assigned IP address clearly in my router firmware. This gets even more strange as now when I try to ping it's IP address listed in my router, I see that it's actually trying to ping my own machine (screenshot of this very odd event below). This has actually driven me crazy to the point that I have actually replaced my router (it was behaving oddly in other ways), and I'm continuing to have these problems. The above ping capture is from the new router. As far as network goes I am now currently using an NetGear R7000 Nighthawk and I haven't customized any of the networking settings in the router just yet (installed yesterday). I would appreciate any advice possible and would be happy to provide further diagnostic information. Networking isn't my strong suit, so I'm not even sure where to begin unraveling this thing.

  Read the article

• Renaming VLAN Interfaces in Linux

  - by rhololkeolke

  I need to know how to rename VLAN interfaces. I'm currently running Ubuntu 11.04. I'm running a networking application that takes frames on one interface applies things like delays and errors and then forwards the frames out another interface. The default naming convention which names things <interface>.<vlan> e.g. eth0.2 will not work for my purposes because the program which parses the configuration script for the networking application doesn't like the decimal in the interface name. I ran vconfig set_name_type VLAN_PLUS_VID which solves the decimal in the interface name problem, however, I can then no longer assign the same vlan id to multiple interfaces because they have the same name. I know how to change physical interface names using udev rules, but because the vlan's will have the same MAC address and they aren't physical interfaces I can't use those rules to rename the interfaces. Is there a way to rename any interface in linux, including the virtual ones? Is there a way to specify your own naming convention for config set_name_type option without having to recompile the source of vconfig?

  Read the article

• .NET Embedded Manifest Crashes XP

  - by Alan Spark

  Hi, I am embedding a manifest in a .NET exe so that it can request elevated permissions in Vista and Windows 7. The manifest that I am using is as follows: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <assemblyIdentity version="1.0.0.0" name="ElevationTest" type="win32"/> <trustInfo xmlns="urn:schemas-microsoft-com:asm.v3"> <security> <requestedPrivileges> <requestedExecutionLevel level="requireAdministrator"/> </requestedPrivileges> </security> </trustInfo> </assembly> It works as expected in Vista and Windows 7 but crashes XP with the standard "... has encountered a problem and needs to close..." error. If I don't embed any manifest then it works as expected but will obviously not have the required permissions in Vista and Windows 7. What is a standard way of producing an exe that will function with the correct permissions in XP and Vista / Windows 7? Thanks, Alan

  Read the article

• Windows Server 2012 Branchcache vs. DFS-R

  - by TheCleaner

  Warning, subjective question ahead! But hopefully a good one that won't get closed. SCENARIO: I have a branch office that currently has no on-premise server. They access everything including a DC across a 12Mbps WAN link (MPLS). The link isn't saturated, averaging around 20% utilization. The circuit is very stable and has a high SLA and excellent uptime. However, large file transfers (mainly reads, not writes) from the file server across the WAN can be slow. We don't currently utilize DFS. RESEARCH DONE: I'm aware of WAN acceleration, using either dedicated hardware (Riverbed) or a dedicated software VM (Silver Peak) for example. But the pricing is outside of our current budget and the need isn't quite there yet from our perspective (since the issue is mainly in a "pull" scenario not necessarily push/pull). I'm mainly looking at deploying a Windows server at this branch office and either utilizing DFS-R or BranchCache. Looking at a table comparison and assuming we are looking at a "hosted branchcache server" and not simply distributed: It would appear there are benefits to both, even if both are "hosted" on a server. QUESTIONS I ACTUALLY HAVE: In what scenarios do each of these techs shine and where do you choose one over the other? Looking at a hosted Branchcache server, can you set "pre-fetching" of certain folders/files on the central file server so that they are immediately accessible locally at the branch? Do you have to do this on a schedule (if it is possible)? Looking at DFS-R my concern (and apparently solved with 3rd party apps) is file locking and making sure the file gets updated properly during a write operation (ie, making sure if both copies are accessed and both are written to, which file takes precedence and what happens to the changes?). Ideal it would seem would be to lock any alternate replicas of the data, but is it really that big of an issue? Does Branchcache lock the central file for editing? Does branchcache only transmit the deltas back to the central file of what has changed? Would either technology be ill advised if the branch office server was going to be utilized as a domain controller as well?

  Read the article

• Time Service will not start on Windows Server - System error 1290

  - by paradroid

  I have been trying to sort out some time sync issues involving two domain controllers and seem to have ended up with a bigger problem. It's horrible. They are both virtual machines (one being on Amazon EC2), which I think may complicate things regarding time servers. The primary DC with all the FSMO roles is on the LAN. I reset its time server configuration like this (from memory): net stop w32time w23tm /unregister shutdown /r /t 0 w32tm /register w32tm /config /manualpeerlist:”0.uk.pool.ntp.org,1.uk.pool.ntp.org,2.uk.pool.ntp.org,3.uk.pool.ntp.org” /syncfromflags:manual /reliable:yes /update W32tm /config /update net start w32time reg QUERY HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config /v AnnounceFlags I checked to see if it was set to 0x05, which it was. The output for... w32tm /query /status Leap Indicator: 0(no warning) Stratum: 1 (primary reference - syncd by radio clock) Precision: -6 (15.625ms per tick) Root Delay: 0.0000000s Root Dispersion: 10.0000000s ReferenceId: 0x4C4F434C (source name: "LOCL") Last Successful Sync Time: 10/04/2012 15:03:27 Source: Local CMOS Clock Poll Interval: 6 (64s) While this was not what was intended, I thought I would sort it out after I made sure that the remote DC was syncing with it first. On the Amazon EC2 remote replica DC (Windows Server 2008 R2 Core)... net stop w32time w32tm /unregister shutdown /r /t 0 w32time /register net start w32time This is where it all goes wrong System error 1290 has occurred. The service start failed since one or more services in the same process have an incompatible service SID type setting. A service with restricted service SID type can only coexist in the same process with other services with a restricted SID type. If the service SID type for this service was just configured, the hosting process must be restarted in order to start this service. I cannot get the w32time service to start. I've tried resetting the time settings and tried to reverse what I have done. The Ec2Config service cannot start either, as it depends on the w32time service. All the solutions I have seen involve going into the telephony service registry settings, but as it is Server Core, it does not have that role, and I cannot see the relationship between that and the time service. w32time runs in the LocalService group and this telephony service which does not exist on Core runs in the NetworkService group. Could this have something to do with the process (svchost.exe) not being able to be run as a domain account, as it now a domain controller, but originally it ran as a local user group, or something like that? There seem to be a lot of cases of people having this problem, but the only solution has to do with the (non-existant on Core) telephony service. Who even uses that?

  Read the article

• Windows Server 2003 IPSec Tunnel Connected, But Not Working (Possibly NAT/RRAS Related)

  - by Kevinoid

  Configuration I have setup a "raw" IPSec tunnel between a Windows Server 2003 (SBS) machine and a Netgear FVG318 according to the instructions in Microsoft KB816514. The configuration is as follows (using the same conventions as the article): NetA | SBS2003 | FVG318 | NetB 10.0.0.0/24 | 216.x.x.x | 69.y.y.y | 10.0.254.0/24 Both the Main Mode and Quick Mode Security Associations are successfully completed and appear in the IP Security Monitor. I am also able to ping the SBS2003 server on its private address from any computer on NetB. The Problem Any traffic sent from a computer on NetA to NetB, or from SBS2003 to NetB (excluding ICMP Ping responses), is sent out on the public network interface outside the IPSec tunnel (no encryption or header authentication, as if the tunnel were not there). Pings sent from a computer on NetB to a computer on NetA successfully reach computers on NetA, but the responses are silently discarded by SBS2003 (they do not go out in the clear and do not generate any encrypted traffic). Possible Solutions Incorrect Configuration I could have mistyped something, somewhere, or KB816514 could be incorrect in some way. I have tried very hard to eliminate the first option. Have re-created the configuration several times, tried tweaking and adjusting all the settings I could without success (most prevent the SA from being established). NAT/RRAS I have seen multiple posts elsewhere suggesting that this could be due to interaction between NAT and the IPSec filters. Possibly the NetA private addresses get rewritten to 216.x.x.x before being compared with the Quick Mode IPSec filters and don't get tunneled because of the mismatch. In fact, The Cable Guy article from June 2005 "TCP/IP Packet Processing Paths" suggests that this is the case, (see step 2 and 4 of the Transit Traffic path). If this is the case, is there a way to exclude NetA-NetB traffic from NAT? Any thoughts, ideas, suggestions, and/or comments are appreciated. Update (2011-06-26) After failing to solve the problem, I resorted to paid Microsoft support. They were unable to solve the problem. Since then I have implemented a solution based on Linux that is working quite well. I will attempt to evaluate any proposed answers as best I can, but current configurations and time constraints will make this slow...

  Read the article

• Logitech Optical Mouse Frozen In Middle of Windows XP Pro Screen

  - by Code Sherpa

  I have a Logitech Optical Mouse/Keyboard. I have been using them just fine with the system drivers for almost a year now. I recently updated my Kaspersky software and rebooted. Now the mouse is frozen in the middle of my screen. I am not able to login to the Windows XP Pro box that has the frozen mouse (because i can't work the mouse) but am able to remote desktop to this computer. Things I know / have tried: When I boot on the problem computer, I am able to use the keyboard, but not the mouse. I have installed the latest version of Logitech's SetPoint (with the updated drivers) on the problem computer (via remote desktop) and that didn't seem to matter. I bought new batteries for the mouse and that didn't matter. I have tried the mouse/keyboard on another computer and the mouse works just fine there. My suspicion is that the Kaspersky install has overwritten a driver of some sort. Things I have not done (and would appreciate detailed steps if you feel this is the way to go): 1) Uninstalled all the mouse drivers on the machine and reboot. Then, reinstall. Note: When I get to the Device Manager I don't see an option for Human Interface Devices (where the mouse device is). Here are my options: Computer, Disk Drives, DVD/CD-Rom drives, Floppy controllers, IDE ATA/ATAPI, Imaging devices, Network Adapters, Other devices, Ports, Processors, Sound, video, and gaming, System devices, USB controllers. Also, I should point out that Video Controller is the only thing under Other devices and it has a yellow exclamation mark. The same is true for all the items under Universal Serial Bus controllers. I think this means I have to update my BIOS but, since my mouse was working just fine without doing that, I don't think that is my problem. So, how do I get to my Mouse Device? 2) Update my BIOS. Note: As pointed out above, I don't think this matters as my mouse was working just fine under my computer's current BIOS version. Thanks for your help.

  Read the article

< Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454  | Next Page >