Search Results

Search found 26179 results on 1048 pages for 'linux from scratch'.

Page 448/1048 | < Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >

• I wrote a new X11 keyboard layout file, how do I get my system to recognize it?

  - by grimborg

  I like to configure my keys my way, so I wrote a keyboard symbols file and I put it in /usr/share/X11/xkb/symbols/cat I use it by running setxkbmap cat -variant dvorak (and it works), but it doesn't show up in the console configuration (dpkg-reconfigure console-setup) nor in the Gnome keyboard settings... nor anywhere else, so I have to run setxkbmap every time. I suppose that I have to register it somewhere, but where? Any hints? Thanks!

  Read the article

• Xen HVM Windows 2008 network bridge

  - by JavierMartinz

  I have a problem with the Windows Server 2008 guest (hvm). I can't get a network interface running for him. I also have a Debian guest and it's working ok, but I can't do it with the Win2k8 guest. When I started the VM, the machine freezes and I can't connect by ssh to the host. /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 188.165.B.C netmask 255.255.255.0 network 188.165.B.0 broadcast 188.165.255.255 gateway 188.165.B.254 brctl show bridge name bridge id STP enabled interfaces eth0 8000.e840f20acc28 no peth0 /etc/xen/xend-config.sxp ... (vif-script vif-bridge) (network-script 'network-bridge') ... /etc/xen/win2k8.cfg # Networking # vif = [ 'ip=5.39.F.G,mac=yy:yy:yy:yy:yy:yy,type=ioemu,bridge=eth0' ] /etc/xen/debian.cfg # Networking # vif = [ 'ip=178.33.D.E,mac=xx:xx:xx:xx:xx:xx' ] As you can see, in the Debian guest I only have to specify an IP address and a MAC. But if I put that in the Win2k8 guest, the machine does not start. I am using Xen 4.0

  Read the article

• Tail and wildcard characters

  - by Mitch

  I want to get the last 10 lines of multiple files. I know they all end with "-access_log". So I tried: tail -10 *-access_log But this gives me an error, where as: tail -10 file-* Gives me the output I'd expect. I would think this probably has more to do with BASH then tail. However commands like: cat *-access_log Work fine. Any suggestions?

  Read the article

• Running Solr on VPS problem

  - by Camran

  I have a VPS with Ubuntu OS. I run solr om my local machine (windows xp laptop) just fine. I have configured Jetty, and Solr just the same way as on my computer, but on the server. I have also downloaded the JRE and installed it on the server. However, whenever I try to run the start.jar file, the PuTTY terminal shows a bunch of text but gets stuck. I could pase the text here but it is very long, so unless somebody wants to see it I wont. Also, I cant view the solr admin page at all. Does anybody have experience in this kind of problem? Maybe java isn't correctly installed? It is a VPS so maybe installation is different. Thanks UPDATE: These are the last lines from the terminal, in other words, this is where it stops every time: INFO: [] webapp=null path=null params={event=firstSearcher&q=static+firstSearcher+warming+query+from+solrconfig.xml} hits=0 status=0 QTime=9 May 28, 2010 8:58:42 PM org.apache.solr.core.QuerySenderListener newSearcher INFO: QuerySenderListener done. May 28, 2010 8:58:42 PM org.apache.solr.handler.component.SpellCheckComponent$SpellCheckerListener newSearcher INFO: Loading spell index for spellchecker: default May 28, 2010 8:58:42 PM org.apache.solr.core.SolrCore registerSearcher INFO: [] Registered new searcher Searcher@63a721 main Also you should know that I installed jetty by just dragging the folders from my HD to the VPS server.

  Read the article

• Error installing Java on Ubuntu Server

  - by Camran

  I get this error almost when installation is finished: /proc is not mounted; some java apps may fail Could not create the Java virtual machine. Error occurred during initialization of VM Could not reserve enough space for object heap Ignoring error generating classes.jsa Why is this? I just entered sudo apt-get install sun-java6-jre sun-java6-plugin sun-java6-fonts Is there something I must do first? What is Proc? If you need more input let me know. Thanks

  Read the article

• PcLinuxOs demands I use only one repository at time. Is it right?

  - by m33600

  I come to your presence with this question that is paralyzing my coding efforts. PclinuxOs was my distro of choice for reliability, but it is jealous and does not permit me to add repos from, say, Debian. The wiki is clear advising on using just one repo, and I end up not finding what I used to find on normal Debians. Multimon, the audio decoder, for example (my other question) is not there. When I try to install multimon with hammer and plies, it returns errors of all kinds. Is there a way to safely and temporarily add a repository, make the install and remove the repo, returning pclinuxos to its stable state?

  Read the article

• Allow PHP to write file without 777

  - by camerongray

  I am setting up a simple website on webspace provided by my university. I do not have database access so I am storing all the data in a flat file. The issue I am experiencing is related to file permissions. I need PHP to be able to read and write the data file but I don't really want to set the file to 777 as anybody else on the system could modify it, they already have read access to everyone's web directories. Does anyone have any ideas on how to accomplish this? Thanks in advance

  Read the article

• How do I get openssh to save my ssh identity permanently in Xfce?

  - by Alliswell

  How do I change it to save my identity permanently using Xfce? During my login session after I have entered: $ ssh-add Then identity is saved and I can connect via ssh without getting the dreaded: Enter passphrase for key However, once I logout and login back-in I get the following when running: $ ssh-add -L The agent has no identities. $ ssh <hostname> Enter passphrase for key '/home/user/.ssh/id_rsa': Stackoverflow has the following solution, yet I do not understand the reference to in the config file: IdentityFile ~/.ssh/id_rsa_buhlServer Specifically I do not understand what I would put on the identity file. Would I put the above word for word? Or just add my file: IdentityFile ~/.ssh/id_rsa StackOverflow solution

  Read the article

• How can I configure a txqueuelen value to persist on reboot?

  - by kdt

  Hi, In CentOS 4.x, I can set the txqueuelen parameter on a network interface with "ifconfig eth0 txqueuelen 1000". However, this is lost when the machine reboots -- which configuration file should I use to set the persistent value of this parameter?

  Read the article

• Fedora 16 Running Hot

  - by sdasdadas

  Since switching from Windows 7 to Fedora 16, my laptop has been running incredibly hot (by the air exhaust). The laptop is an Asus K73S. Running 'sensors', I receive: acpitz-virtual-0: 75.0 celsius nouveau-pci-0100: 66.0 celsius asus-isa-0000: 75.0 celsius The only CPU hog is Firefox at 30 - 40% on average. My GPU information (from lspci) is: Intel Corporation Xeon E3-1200/2nd Generation Core Process or Family Integrated Graphics Controller (rev 09). Running lspci | grep -i VGA, returns: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M SDDR3] (rev a1) I don't notice a huge difference running without the battery, but it does seem a little cooler. Thanks!

  Read the article

• Bonding and default gateway problem (CentOS)

  - by lg

  I configured network bonding on two machine with centos 5.5. Bonding works well, but the problem is default gateway: it is not configured! I follow this tutorial. I added GATEWAY in both (and either) /etc/sysconfig/network and /etc/sysconfig/network-scripts/ifcfg-bond0. But, when I restart network (or server) there is no default gateway (route command). This is ip route ls output after network restart: 10.0.0.0/16 dev bond0 proto kernel scope link src 10.0.0.88 Where is my mistake?

  Read the article

• How can you get MySQL statistics for a specific user?

  - by Exit

  I've searched Google for a while on this and I'm not sure if it is easily or directly possible. I'm hosting a database on my cPanel server for a client which is accessed from their main website. As a result, I can't find a way to determine what amount of resources they are using. As there aren't any files under their account, cPanel reports the bandwidth at zero. I do know the stat programs don't monitor MySQL and that MySQL has a global statistics page that reports all usage on the server.

  Read the article

• 2.6.9 Kernel on virtual server (non upgradable) - any expected problems?

  - by chris_l

  Hi, I'm considering to rent a virtual server (for me personally). The product I'm currently looking at offers IMO fair pricing, very good hardware etc. The only problem is, that I won't be able to do an upgrade to a newer kernel than 2.6.9 (running Debian Etch). Also, I can't install my own kernel modules. (The server runs with Virtuozzo, so as far as I understand it, it just does some chroot instead of a real virtualization (?)) I want to run GlassFish, Postgres, Subversion, Trac and maybe some other things on it. It will also have to employ a firewall, and provide OpenSSL for https. Ideally, it would also be able to do AIO (asynchronous IO), which could speed up some server I/O. Should I expect problems with that old kernel version, in conjunction with the software I want to install (I'd like to use current versions of the software)? One thing I already found out, is that you can't do everything with iptables, since some kernel modules are missing/things are not build into the kernel. GlassFish v3 appears to run fine at first glance. I was able to test the server for a few hours. Installing my whole setup wasn't feasible in that time, but what I can say is, that it's amazingly fast for an entry-level vserver, especially hard disk and network performance (averaging at ca. 400MBit/s). So if the kernel won't be a problem, I'd really like to take it. Thanks, Chris PS Exact kernel version: 2.6.9-023stab051.3-smp

  Read the article

• sudoers entries

  - by Pochi

  Is there a way to have a sudoers entry that allows executing of only a particular command, without any extra arguments? I can't seem to find a resource that describes how command matching works with sudoers. Say I want to grant sudo for /path/to/executable arg. Does an entry like the following: user ALL=(ALL) /path/to/executable arg strictly allow sudo access to a command exactly matching that? That is, it doesn't grant user sudo privileges for /path/to/executable arg arg2?

  Read the article

• How do I reset my PYTHONPATH?

  - by Underyx

  Somehow my PYTHONPATH environment variable got emptied, and now I can't import some downloaded modules. I've tried running the following command to reinstall all Python packages, but it didn't set the variable back to its original value: dpkg-query -W -f '${package}\n' | grep python | xargs -I % sudo apt-get install % --reinstall How do I reinstall the packages so that this gets sorted out? The (Vagrant) box is running Ubuntu 12.04.

  Read the article

• Why doesn't my cron.d per minute job run?

  - by Travis Griggs

  I have thrown a bunch of darts trying to get a python script of mine to execute every minute. So I thought I'd simplify it to just do the "simplest thing that could could possibly work" once per minute (I'm running debian/testing). I created a single line file in /etc/cron.d/perminute: * * * * * /bin/touch /home/me/ding_dong It's owned by root, and executable (not sure if either of those matter). And then I did: sudo service cron reload And then sit back and start running ls -ltr again and again in my home directory (/home/me). But my ding_dong file never shows up. I know if I do a sudo /bin/touch /home/me/ding_dong, it shows up right away. Obviously missing something stupid here.

  Read the article

• Bridging two wireless interfaces with brctl?

  - by AK_

  I have this topology: [internet] ^ L-------[wlan0]-[host]-[wlan1]-----[client-1] I tried to bridge wlan0 wlan1 but it wont work with brctl; but magically when I issue this command #iw set dev wlan0 4addr on it adds wlan0 to the bridge BUT I lost all internet connection and I was unable to hook it to the internet router. can somebody please explain why did that happen and is there a way to get this done ?

  Read the article

• SSH login without password prompt

  - by user477519

  I am trying to set up Opennebula. I want to set up my local host so that I can log into my remote host without having to use the password. I have followed the instructions in the "Secure Shell Access" section in the installation instructions. I can not log into my remote host from my local host, but I can log into my local host from my remote host. Not sure what's going on. Any help would be appreciated. Thanks

  Read the article

• Edit write-protected files by breaking hard links

  - by Taymon

  A directory which I own and can write to contains hard links to files that I don't own and don't have write permission for. I want to open and edit these files in Emacs. When I save my changes, Emacs should rename the existing hard link by appending ~, then write my new version of the file as a new file owned by me. I was under the impression that Emacs could just do this (because of the way it does backups), but it's not working; when I save, it attempts to change the file's permissions in order to write to it (and fails because I don't own the file). How do I make this happen?

  Read the article

• ssh -x : howto get clipboard?

  - by Gupu User

  Hello! I'm connected to a server via ssh -x and my only way to get text out of the system is the x clipboard (unless i want to take thousends of screenshots and OCR over it). I can not execute any programs on the other machine, because i don't have access. How can I achive this?

  Read the article

• iptables redirect single website traffic to port 8080

  - by Luke John Southard

  My goal is to be able to make a connection to one, and only one, website through a proxy. Everything else should be dropped. I have been able to do this successfully without a proxy with this code: ./iptables -I INPUT 1 -i lo -j ACCEPT ./iptabels -A OUTPUT -p udp --dport 53 -j ACCEPT ./iptables -A OUTPUT -p tcp -d www.website.com --dport 80 -j ACCEPT ./iptables -A INPUT -m conntrack --cstate ESTABLISHED,RELATED -j ACCEPT ./iptables -P INPUT DROP ./iptables -P OUTPUT DROP How could I do the same thing except redirect the traffic to port 8080 somewhere? I've been trying to redirect in the PREROUTING chain in the nat table. I'm unsure if this is the proper place to do that tho. Thanks for your help!

  Read the article

• What is the best time to set the IP address for a server headed to a server colocation facility?

  - by jim_m_somewhere

  What is the best time to set the IP address for a server? I have a server that I am going to install the OS on and then I am going to send it to a server colocation facility. The server is going to have Internet facing services (www, email, etc.) I can set up a "fake" IP address during install (by fake I mean private as in RFC 1918) and change the "fake" IPs to the real IPs once I set up the colocation service. The other option is to set up the colocation service...wait for them to give me the "real" IPs and use them during the OS install. The ramification are that...if I use "fake" IPs during install...I will have to wait before I set up things like SSL certs. If I wait for IPs from the colocation provider...then I can set up SSL certs that use the "correct" (as in "real") IP addresses...no changes to the certs until they expire. Do the "gotchas" of changing an IP address on a server outweigh the benefits of a quick install? The other danger with using "fake" IPs is that I could make a mistake when I go through the various files to change the IP address to the "live" IP address. Server OS: CentOS 6.2 or CentOS 6.3, 64 bit. Apps: Apache 2.4.X httpd, MySQL 5.X (will eventually use replication)

  Read the article

• Open file without specifying exact location

  - by person

  Say I have a file in some obscure directory that I want to open and edit. I don't want to do something like this... vim ~/foo/bar/blah/doh/ugh.txt I'd rather be able to say find this file and open it. I know there are commands like locate and find to find a file or directory, but I'm not sure whether these can (or even should) be utilized in what I'm trying to do. Basically, what is the simplest way to open a file with a program w/o specifying its exact location? (In cases where there isn't another file with the same name in the entire system, and cases where there are multiple).

  Read the article

• AWSTATS - manual update error (permissions)

  - by Lewis

  Error: Couldn't open file "/var/www/awstats/awstats032014.site.net.tmp.9198" for write: Permission denied Setup ('/etc/awstats/awstats.site.net.conf' file, web server or permissions) may be wrong. Check config file, permissions and AWStats documentation (in 'docs' directory). I get this error when manual trying to update awstats (via the browser link). I have set the folder permissions of /var/www/awstats/ to 775 and still get the error. If I create a new file on that folder the default permission setting set the permissions to 774 which should work.

  Read the article

• Improving sound quality with remote ESD server

  - by cuu508

  Hi, I'm investigating low-budget ways to get audio from my PC (Ubuntu) to HiFi without wires. I'm currently testing a setup where Asus WL-500gP wireless router runs ESD daemon and has attached USB soundcard which is then plugged into HiFi. I'm testing playback on PC with mpg123-esd and Spotify under Wine. The sound is there, latency is unexpectedly low, but I also hear occassional clicks and some distortion from time to time. I suppose that's because of the low latency and wireless streaming of uncompressed audio--any packet drops, CPU temporarily being busy etc. will cause clicks in sound output. Is there a way around this problem, increasing latency / buffer size somehow perhaps? Streaming using shoutcast protocol seems to be a way out but I have feeling that would be a complex and brittle setup.

  Read the article

< Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >