Search Results

Search found 14745 results on 590 pages for 'setting'.

Page 448/590 | < Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >

• Word 2010 does not save as Word 2003 XML

  - by Peter

  I have a document which was created in Word 2010, but for use in a particular application, it needs to be saved in Word 2003 XML format. When I try the normal "Save as" via the File menu (choosing Word 2003 XML format to save as), Word 2010 thinks for a while, and then presents the "Save as" dialog to me again, suggesting that I save the document as .docx. Trying to get around this, I saved the document as .doc (i.e. Word 97-2003 document). This worked fine. But when I try to save this .doc file as Word 2003 XML, again Word 2010 thinks for a while, and then presents the "Save as" dialog, suggesting this time that I save the document as .doc. Oh, and I need to say that this only happens on a specific document - all others work fine. I know I should try a process of elimination and see what is causing the symptoms, but it would nice to have an answer "in principle". Is there perhaps a setting somewhere that I have enable? Does anyone know what's going on here?

  Read the article

• Why do I need to set up Autologon values in registry twice before it works and can i fix this?

  - by jJack

  Background: As part an automated testing suite I am building, I need to set up Autologon on my virtual machines 'on demand'. By on demand, I mean that I don't want to necessarily pre-configure my VM or any snapshot to have Autologon set up already, for security reasons and also a huge business case. My solution so far: I'm copying a script to the guest machine and then using Sysinternals PsExec to execute it. The script is: reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultUserName /t REG_SZ /d myusername reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultPassword /t REG_SZ /d myfakepassword reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultDomainName /t REG_SZ /d mydomain reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v ForceAutoLogon /t REG_SZ /d 1 reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v AutoAdminLogon /t REG_SZ /d 1 reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\AutoLogonChecked" /f /ve /d 1 Note: I don't believe AutoLogonChecked is required for machines post Windows 2000 but I'm doing it just in case for now. Maybe ForceAutoLogon isn't either, not sure yet. The Problem: I see PsExec executes this properly and all the values are in the registry, however when I restart the machine, the user isn't automatically logged on...When I run this a second time then restart the machine, the user is finally logged on. A diff between the registry states shows that the first time I run this, it is missing both the "1" for AutoAdminLogon, and also the DefaultPassword key. The second time I execute it, these values are correctly intact as I intended. So, what is going on here? Is this expected? This post claims in the end that it really all just works (the problem was that a logoff script was setting off the values). Doesn't seem to work for me however.

  Read the article

• How do I restore to a delta file (disk) on Vmware ESXi

  - by Oscar

  Using VMware Server ESXi (freebie version) I have a Virtual Machine (win 2k3 r2 server). When I first provisioned it I took a snapshot of it. I recently tried to clone the primary drive using my standard hardware-based method to grow a windows disk. (using knoppix, clone drive to a new drive, make it bootable, then I intended to extend the partition via diskpart from within windows). This process failed; I tried setting the cloned drive (via the vmware gui) to replace the original drive, boot and be done. This didn't work out so well. The machine never booted. I checked the boot order, the disk location and all the basics I usually do. As a failsafe, I then tried changing all the settings back so the machine would boot to the original drive and I could figure out (as I eventually did) a better way of growing the disk. However when I powered on the machine with the original drive, it reverted back to that initial snapshot I created; It lost all the changes since. I looked in the file system and found a few files, I think the keyfile here is one named "delta" and I'm assuming that's the disk I want, but I can't find a way to have the Virtual Machine actually use that drive/file. It isn't available to add when I go to add an existing drive. Do I need to somehow commit that delta to the original drive and then boot from it again? Can you point me in the right direction? I've since discovered the proper way of growing drives using "vmkfstools" but I need to get back to the original state of the machine to try this out. Any help would be greatly appreciated.

  Read the article

• Outlook / Gmail 'too many simultaneous connections' error

  - by sam

  I'm just setting up Outlook for Mac, and I'm trying to add a Google Apps application for business email (Gmail). I've set it up correctly (same details worked in Mac mail). But I keep getting two errors, either or just a error asking for the username and password again. Just to confirm the user name and password are correct, although when I go into menu command Tools - Account and look in the password field for that account it's blank. But if I just click cancel on the popup asking for my username password it just continues to get mail in the background for about 30 seconds, before again asking again for the password, or showing the above error which I can click 'yes' to and again it will get the mail. But after 30 seconds it does the same thing. I've got two other accounts set up fine, one a horde account (hosted webmail using POP3) and the other a iCloud .me account running on IMAP. What might be causing this and how I can remedy it? A bit more background: the machine is a MacBook Pro running Mac OS X v10.7 (Lion). Update 2013-11-02 I've updated Outlook to SP3, but I still get the same error.

  Read the article

• Configuring a MySQL 5.1 Instance on Windows 7 Professional x64 Fails

  - by Thomas Owens

  I'm trying to set up my laptops to function as mobile development environments. Installing the software on my Linux machine and getting it configured was fairly straightforward, however I'm having trouble getting MySQL 5.1 Server installed and configured on Windows 7 Professional 64-bit. I'm currently using the Windows MSI Installer for the complete MySQL 5.1 system (as opposed to the Essentials installer also available). I've tried to install using both the 32-bit and 64-bit versions of MySQL 5.1 - the same events occur in both. I've installed both the Server Instance Configuration Wizard and Workbench and everything appears to be installed just fine. When I open the Instance Configuration Wizard, I select Detailed Configuration. On the next screen, I select Development Environment, then Multifunctional Database on the next screen. I leave the InnoDB settings unchanged. I select Manual Setting with 5 concurrent connections. I enable TCP/IP Networking on Port 3306 and Enable Strict Mode. I select the Standard Character Set. I check the boxes for Install as a Windows Service (and provide the name "MySQL") and Include the Bin Directory in Windows PATH. On the next screen, I set my root user name and password. I do not enable root access from remote machines and I also do not create an anonymous account. On the final screen of the wizard, when I click "Execute", the first two tasks (Prepare Configuration and Write Configuration File) complete. However, when it reaches Start Service, the wizard hangs and becomes unresponsive ("Not Responding" appears in the title bar and Task Manager). I would really like to be able to use both my Windows and Linux laptops as full-blown mobile development environments, but I can't do that without being able to run MySQL. Has anyone encountered this problem before? What options do I have to correct it?

  Read the article

• LAMP Setup, PHP's session_start permission denied

  - by Andrew

  I'm trying to set up a development environment for a legacy system that runs CentOS 4.8, PHP 4.3.9, and MySQL 4.1.22. I'm matching OS and software versions to keep the development server as close to the production server as possible. When I fire up PHPMyAdmin's setup script (version 2.11.10.1, of course) the installation errors out and I see these errors in my error log: [client 172.18.141.74] PHP Warning: session_start(): open(/var/lib/php/session/sess_b5b90f86bd3dcfad315ff24cb7483a79, O_RDWR) failed: Permission denied (13) in /home/www/intranet/phpmyadmin/libraries/session.inc.php on line 87 [client 172.18.141.74] PHP Warning: Unknown(): open(/var/lib/php/session/sess_b5b90f86bd3dcfad315ff24cb7483a79, O_RDWR) failed: Permission denied (13) in Unknown on line 0 [client 172.18.141.74] PHP Warning: Unknown(): Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/lib/php/session) in Unknown on line 0 I've done some searching on ServerFault and on teh Googles and I see that a common reason for this error is that the session.save_path isn't writable by the www user. I also found where in /etc/php.ini this URL is set: session.save_path. My session.save_path is set to: session.save_path = /var/lib/php/session I've since changed the owner and the group of /var/lib/php/session and still have the same error. Here's the result of ls -la for /var/lib/php [root@localhost php]# ls -la total 24 drwxrwxr-x 3 www www 4096 Oct 23 20:21 . drwxr-xr-x 17 root root 4096 Oct 23 20:31 .. drwxrwx--- 2 www www 4096 Jun 1 2009 session ...But I'm still getting the same error. Is there another possibility for why I'm getting this error?

  Read the article

• “NT AUTHORITY\ANONYMOUS LOGON” error in Windows 7 (ASP.NET & Web Service)

  - by Tony_Henrich

  I have an asp.net web app which works fine in Windows XP machine in a domain. I am porting it to a Windows 7 stand alone machine. The app uses a web service which makes a call to sql server. The web server (IIS 7.5) and SQL Server are on the same stand alone machine. I enabled Windows authentication for the website and web service. The web service uses a trusted connection connection string. The web service credentials uses System.Net.CredentialCache.DefaultCredentials. I noticed username, password and domainname are blank after the call! The webservice and web site use the 'Classic .NET AppPool' with NetworkServices identity. I am getting an exception "NT AUTHORITY\ANONYMOUS LOGON" in the database call in the web service. I am assuming it's related to the blank credentials. I am expecting ASPNET user to be the security token to the database. Why is this not happening? Did I miss a setting? (Usually this happens when sql server and web server are on two different machines in a domain, delegation & double hopping, but in my case everything is on a dev box)

  Read the article

• Switch to IPv6 and get rid of NAT? Are you kidding?

  - by Ernie

  So our ISP has set up IPv6 recently, and I've been studying what the transition should entail before jumping into the fray. I've noticed three very important issues: Our office NAT router (an old Linksys BEFSR41) does not support IPv6. Nor does any newer router, AFAICT. The book I'm reading about IPv6 tells me that it makes NAT "unnecessary" anyway. If we're supposed to just get rid of this router and plug everything directly to the Internet, I start to panic. There's no way in hell I'll put our billing database (With lots of credit card information!) on the internet for everyone to see. Even if I were to propose setting up Windows' firewall on it to allow only 6 addresses to have any access to it at all, I still break out in a cold sweat. I don't trust Windows, Windows' firewall, or the network at large enough to even be remotely comfortable with that. There's a few old hardware devices (ie, printers) that have absolutely no IPv6 capability at all. And likely a laundry list of security issues that date back to around 1998. And likely no way to actually patch them in any way. And no funding for new printers. I hear that IPv6 and IPSEC are supposed to make all this secure somehow, but without physically separated networks that make these devices invisible to the Internet, I really can't see how. I can likewise really see how any defences I create will be overrun in short order. I've been running servers on the Internet for years now and I'm quite familiar with the sort of things necessary to secure those, but putting something Private on the network like our billing database has always been completely out of the question. What should I be replacing NAT with, if we don't have physically separate networks?

  Read the article

• Printing special / extended characters on web page - Firefox or printer issue?

  - by edmicman

  My dad brought this to my attention and I'm looking into it, but thought I'd post here and see if anyone has any ideas... He's running Win7, using Firefox and printing to a wireless connected Brother HL-2170W printer. He's got a web page (http://cornandsoybeandigest.com/inputs/fertilizer/applying-nitrogen-after-planting-0512/index.html) that has extended/special characters in it - the funny "a" in Fernandez. The characters show correctly in Firefox on the page. He printed it, and the extended "a" printed as a diamond with a question mark. He says it shows that way in the print preview, too. I pulled up the same page in Ubuntu, Firefox, and it displayed in my print preview and physically printed everything correctly. I just checked on my wife's Win7 PC in Firefox and the print preview looked correct on her system, too. We have a Brother 2040 here. Soooo, my question is, is this possibly a problem in the browser somehow, or the printer driver? I'm leaning towards the printer driver now, but I can't say I've run into this before. Is it a setting somewhere? I just installed this printer for him the other day, using the CD that came with it; I could try updating the driver from Brother's website I guess. Is there anything else I should look at or check? Thanks!

  Read the article

• ipv6 with KVM on debian

  - by Eliasdx

  I have trouble setting up IPV6 on my Proxmox (KVM) server: My ISP sent me this information(xxx=placeholder): IPs: 2a01:XXX:XXX:301:: /64 Gateway: 2a01:XXX:XXX:300::1 /59 This is the interface setup on the host server: auto vmbr1 iface vmbr1 inet static address 178.XX.XX.4 broadcast 178.XX.XX.63 netmask 255.255.255.192 pointopoint 178.XX.XX.1 gateway 178.XX.XX.1 bridge_ports eth0 bridge_stp off bridge_fd 0 iface vmbr1 inet6 static address 2a01:XXX:XXX:301::2 netmask 64 up ip -6 route add 2a01:XXX:XXX:300::1 dev vmbr1 down ip -6 route del 2a01:XXX:XXX:300::1 dev vmbr1 up ip -6 route add default via 2a01:XXX:XXX:300::1 dev vmbr1 down ip -6 route del default via 2a01:XXX:XXX:300::1 dev vmbr1 On the guest: auto eth0 iface eth0 inet static address 178.xx.xx.47 netmask 255.255.255.255 broadcast 178.xx.xx.63 gateway 178.xx.xx.1 pointopoint 178.xx.xx.1 iface eth0 inet6 static pre-up modprobe ipv6 address 2a01:XXX:XXX:301::2:2 netmask 64 up ip -6 route add 2a01:XXX:XXX:300::1 dev eth0 down ip -6 route del 2a01:XXX:XXX:300::1 dev eth0 up ip -6 route add default via 2a01:XXX:XXX:300::1 dev eth0 down ip -6 route del default via 2a01:XXX:XXX:300::1 dev eth0 Ipv4 works on both host and guest but Ipv6 only works "sometimes". It's up for minutes and then down again until I change something. However I can actually ping the host and the guest from both host and guest. host:~# ip -6 neigh 2a01:XXX:XXX:301::100:2 dev vmbr1 lladdr 00:50:56:00:00:e0 REACHABLE 2a01:XXX:XXX:300::1 dev vmbr1 lladdr 00:26:88:76:18:18 router STALE host:~# ip -6 route 2a01:XXX:XXX:300::1 dev vmbr1 metric 1024 mtu 1500 advmss 1440 hoplimit 4294967295 2a01:XXX:XXX:301::/64 dev vmbr1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev vmbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev vmbr1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev tap101i1d0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via 2a01:XXX:XXX:300::1 dev vmbr1 metric 1024 mtu 1500 advmss 1440 hoplimit 4294967295 Does someone know why it isn't working? And is there a way to configure multiple v6 IPs from the same subnet so I can dedicate IPs to websites on a server with multiple virtualhosts?

  Read the article

• No password is complex enough

  - by Blue Warrior NFB

  I have one user in my AD domain who seems to not be able to self-select a password. I may have another one, but they're on a different enough password-expiration schedule that I can't remember who it is right now. I can set a password via ADU&C just fine, but when he tries it via C-A-D he gets the "doesn't meet complexity" message. Figuring he was just doing something like 'pAssword32', I did some troubleshooting of my own and sure enough it doesn't want to take a password that way. He's one of our users that habitually uses a local account and then maps drives using his AD credentials so he doesn't get the your password will expire in 4 days, maybe you should change it prompts, so he's a frequent "my password expired, can you fix it" flyer. I don't want to keep having him set it via ADU&C over my shoulder every N days. I'm just fine setting temp passwords of 48 characters of keyboard-slamming and letting him change it something memorable. My environment is at the Windows 2008 R2 functional level, and I am using fine-grained password policies. In fact, I have two such policies: For normal users (minimum length, remembered passwords) For special utility accounts The password complexities I've tried match both policies for length and char-set selection. The permissions on the User object themselves look normal, SELF does indeed have the "Change Password" right. Is there some other place I should be looking for things that can affect this?

  Read the article

• Why is .htaccess not allowed in a directory but is allowed in another?

  - by John Isaacks

  I have apache2 installed on ubuntu 10.4 inside my var/www/ directory [amung others] I have a cakephp and a dvdcatalog directories. Each of which have CakePHP 1.3 installed. I can access them both via localhost/cakephp and localhost/dvdcatalog But the dvdcatalog shows up with no css styling. They both have these files: /var/www/cakephp/app/webroot/css/cake.generic.css /var/www/dvdcatalog/app/webroot/css/cake.generic.css But when I go to http://localhost/cakephp/css/cake.generic.css it sees the file but it does not see the file when I go to http://localhost/dvdcatalog/css/cake.generic.css I think this means the cakephp folder is able to use .htaccess and the dvdcatalog is not. I setup the cakephp directory last month when I was following in the blog tutorial. I am setting up the dvdcatalog directory now for a different tutorial. So I am not sure if I am missing a step. in my /etc/apache2/apache2.conf file I have this: <Directory "/var/www/*"> Order allow,deny Allow from all AllowOverride All </Directory> Which I thought gave .htaccesss to all. Does anyone have any ideas what the problem is?

  Read the article

• Help with Ubuntu and Windows, separate HDs

  - by LuxuryMode

  Need some major help. Running a Dell XPS/Dimension 630i. It came with "SATA 2 RAID 0 With Dual 500GB Hard Drives." I have installed a new, third non-raided drive and installed Ubuntu on it. So now I have Windows on the original hard drive and Ubuntu Linux on the new HD. When I get to the boot menu where I can select an OS, if I select windows I get an error: "No such drive, no such disk." Also, strangely in the first place, in order to even get to the bootloader menu I have had to disable ALL ports under the RAID config. Unless I do this, I will just get to a never-ending blinking cursor. I have tried every conceivable CMOS config and nothing else works. Tried setting port 3 (the new HD w/ Ubuntu) to first hard disk boot priority. Tried disabling all other ports and enabling the Ubuntu HD port and vice versa. I have some pictures of boot up: first one is strange error i get after messing with CMOS to finally get ubuntu install to work. http://imgur.com/5sqJa then boot menu: http://imgur.com/TWtLq then error: http://imgur.com/TJ1mS. Also, please note that I can actually access all files from the raided Windows drive through Ubuntu.

  Read the article

• Clustered MSDTC

  - by niel

  Hi I'm setting up a SQL cluster (SQL 2008), Windows 2008 R2. I enable the network access on local dtc and then create a DTC resource in my cluster . the problem is that when i start up the resource it does nto pull through my settings to enable network access. the log shows this: MSDTC started with the following settings: Security Configuration (OFF = 0 and ON = 1): Allow Remote Administrator = 0, Network Clients = 0, Trasaction Manager Communication: Allow Inbound Transactions = 0, Allow Outbound Transactions = 0, Transaction Internet Protocol (TIP) = 0, Enable XA Transactions = 0, Enable SNA LU 6.2 Transactions = 1, MSDTC Communications Security = Mutual Authentication Required, Account = NT AUTHORITY\NetworkService, Firewall Exclusion Detected = 0 Transaction Bridge Installed = 0 Filtering Duplicate Events = 1 where when i restart the local dtc service it says this: Security Configuration (OFF = 0 and ON = 1): Allow Remote Administrator = 0, Network Clients = 1, Trasaction Manager Communication: Allow Inbound Transactions = 1, Allow Outbound Transactions = 1, Transaction Internet Protocol (TIP) = 0, Enable XA Transactions = 1, Enable SNA LU 6.2 Transactions = 1, MSDTC Communications Security = No Authentication Required, Account = NT AUTHORITY\NetworkService, Firewall Exclusion Detected = 0 Transaction Bridge Installed = 0 Filtering Duplicate Events = 1 settings on both nodes in teh cluster is the same. I have reinstalled and restarted to many times to mention. Any ideas ?

  Read the article

• TLS_REQCERT and PHP with LDAPS

  - by John

  Problem: Secure LDAP queries via command-line and PHP to an AD domain controller with a self-signed certificate. Background: I am working on a project where I need to enable LDAP look-ups from a PHP web application to a MS AD domain controller that is using a self-signed certificate. This self-signed certificate is also using a domain name that is not a FQDN - think of something like people.campus as the domain name. The web application would take the user's credentials and pass them on to the AD domain controller to verify if the credntials are a match or not. This seems simple, but I am having problems trying to get PHP and the self-signed certificate to work. Some people have suggested that I changed the TLS_REQCERT variable from "request" to "never" within the OpenLDAP configuration. I am concerned that this might have larger implications such as a man-in-the-middle attack and I am not comfortable changing this setting to never. I have also read some places online where one can take a certificate and place it as a trusted source within the openldap configuration file. I am curious if that is something that I could do for the situation that I have? Can I, from the command line, obtain the self-signed certificate that the AD domain controller is using, save it to a file, and then have openldap use that file for the trust that it needs so that I do not need to adjust the variable from request to never? I do not have access to the AD domain controller and as a result cannot export the certificate. If there is a way to obtain the certificate from the command line, what commands do I need to use? Is there an alternate method of handling this issue that would be better in the long run? I have some CentOS servers and some Ubuntu servers that I am working with to try and get this going on. Thanks in advance for your help and ideas.

  Read the article

• Windows 8.1 in a VMWare Workstation 10 guest's mouse is missing, but only sometimes

  - by Rob Perkins

  I have VMWare Workstation 10 running on a Windows 7 machine, hosting a k guest OS. Before upgrading to WS 10 I was using version 9, and the Win8 guest OS ran without difficulty or error conditions. Since upgrading and installing the most current VMWare Tools inside the guest after upgrading to version 10, there are circumstances where the mouse pointer is not visible; the mouse position appears stuck at a screen location which is not the center of the virtualized display; and mouse click and scrolling events still get processed. Once this begins happening I have to reboot the host machine to get it to stop. (VMWare Tools 9.6.1 build-1378637 is what the WS 10 software installed) The problem seems to correlate with whether the mouse is captured during Win 8.1's bootup process, before control is passed to the login screen. If I explicitly click the mouse into the guest OS and move it slowly around while the system is booting, then I see the mouse after clicking to lift the first screen and expose the password prompt, and there is never a problem within the guest. If I don't do this during bootup, there is no mouse pointer, with the symptoms listed above. I have tried removing and reinstalling VMWare tools, and the other steps published for "mouse problems" from VMWare's chaotic troubleshooting database. The problem persists. Is there a setting in the virtual machine's configuration which could prevent this behavior?

  Read the article

• Sparc Solaris 2.6 will not boot

  - by joshxdr

  I have a very old Sparc Solaris network that was working fine last week, but after a power outage none of the workstations will boot. The network looks like this: host A: solaris 2.6, shares /export/home to network by NFS host B: solaris 8, runs NIS server. Mounts /export/home/ by NFS. host C: RHEL5, shares /share to network by NFS. Mounts /export/home/ by NFS. I figured that the main problem was host A, since you need the home directories available for the other workstations to boot(?). Host A does not mount anything by NFS as far as I know. However, this workstation will NOT boot. The OBP bootup sequence looks like this: Boot device <blah> configuring network interface le0 Hostname <hostname> check file system <everything ok> check ufs filesystem <everything ok> NIS domainname is <name> starting router discovery starting rpc services: rpcbind keyserv ypbind done setting default interface for multicast: add net 224.0.0.0: gateway <hostname> <HANGS at this point> Is there some kind of debug mode so that I can get more detail as to why the workstation won't boot? Is my network structure inherently susceptible to power outage? Is there a way I can boot up to command line so I can at least turn off the NFS mounting?

  Read the article

• Forward secrecy in Nginx (CentOS6)

  - by Anil

  I am trying to enable Forward secrecy in CentOS with nginx webserver. What I have tried I have read some tutorials and seems like we should have nginx, openssl latest versions to enable it. So I had installed the openssl latest from source. sudo wget http://www.openssl.org/source/openssl-1.0.1e.tar.gz sudo tar -xvzf openssl-1.0.1e.tar.gz cd openssl-1.0.1e sudo ./config --prefix=/usr/local sudo make sudo make install Now OpenSSL supports the Eliptic Curve ciphers(ECDHE). I tested this with openssl s_server also. It worked well. Next, I replaced Nginx with latest. sudo wget http://nginx.org/packages/centos/6/x86_64/RPMS/nginx-1.4.2-1.el6.ngx.x86_64.rpm sudo rpm -e nginx sudo rpm -ivh nginx-1.4.2-1.el6.ngx.x86_64.rpm and configured Nginx as described in this link ssl_protocols TLSv1 TLSv1.1 TLSv1.2; ssl_prefer_server_ciphers on; ssl_ciphers EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA256:EECDH+aRSA+RC4:EDH+aRSA:EECDH:RC4:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS; http://baudehlo.wordpress.com/2013/06/24/setting-up-perfect-forward-secrecy-for-nginx-or-stud/ But now Nginx does not support ECDHE ciphers. It supports DHE ciphers. I tried by just enabling ECDHE cipher in nginx still doesn't work. I am using latest web browser(chrome 29 and it support this cipher) Am i missing anything ? Or Having issues with CentOS or Nginx? I read somewhere that ECC patent issues with CentOS, is this causing problem?

  Read the article

• Generic/Text Printer on Windows 7 not prompting for file name

  - by Trevor Tippins

  Hope someone can shed some light on this. I am downloading reports from an AIX-based system by directing them to a TT printer which the terminal emulator (MultiView 2000) intercepts and directs to the default printer on the local system. This local printer is configured as a vanilla Generic/Text printer attached to a FILE port. When I print from AIX, the output is spooled down and the local printer prompts for a file name into which to save the file...but not under Windows 7. This has worked fine for many years, on both Win2K and WinXP. However, on Windows 7 the output gets spooled as a file into spool\PRINTERS (and looks as expected) but the print job then hangs with a status of "Error - Printing" and never prompts for a file name. I have to cancel the job. The Generic/Text printer works as expected with other applications. I have tried setting the printer to print directly rather than spooling but this only serves to hang the terminal session too. I've also tried to run the emulator in Windows 2000 Compatibility Mode and as Administrator in case it was something like that but with no luck. As you might expect, it does work fine in XP Mode (as long as I print to a printer defined therein and not the host's printer) but operationally this isn't going to be an option. Obviously this emulation software is a decade old (at least) and I could just cross/upgrade all the users (at a cost) but, before I do so, has anyone seen this sort of behaviour before and found some sort of fix? Remote OS: AIX 5 Client OS: Windows 7 Pro (32-bit) Printer: Generic/Text on a FILE port TE Software: MultiView 2000 (32-bit) Thanks in advance.

  Read the article

• Adding subnet to a vsphere with single vcenter and esxi host

  - by Ilya Rakhlin

  Let me start of by saying that I do not specialize in networking, I am in the process of adding additional VMs to a testing environment and wanted some recommendations. In this case I am running a single ESXI 5.1 host and a single Vcenter management server. The problem is, I need another range of IP addresses added to the existing setup; hopefully without reconfiguring everything. Currently the esxi host is configured to IP: 192.168.100.200, gateway: 192.168.100.1 and subnet: 255.255.255.0. All of the VMs are running some version of linux with hard coded IP addresses in that range, and using that subnet. The VMs I am about to deploy I want to be on the 192.168.101.X network. Is it possible to add an additional subnet to this existing system that will also communicate with the current subnet? The esxi host has 6 physical NICs but only one connected as it is only a testing system; not sure if that matters. Are there any other ways to accomplish this hopefully without restarting or at least reconfiguring the IP addresses for each VM? Reason: Due to the configuration of the VMs to run the applications that we need I am using a large amount of the current IPs in the potential range (mostly VIPs). I will be setting up a new version of this “environment” while keeping the old one, thus potentially running out of IP addresses.

  Read the article

• Permissions in OS X for iTunes library with multiple users

  - by John

  I currently have a lot of music on an external drive and my iTunes set up from there. However, periodically, when the external drive isn't connected, iTunes will default back to the library location of my home directory user path. I don't want to mess with an external drive, as my Mac's HD is large enough to house the music collection. However, I have 4 family members – all with their own logins – using this same gob of music. I don't want four copies of the library, only one with all libraries referencing it. So, what I want to do is: Move all music files to a shared directory at /Macintosh HD/users/music. I created this directory and adjusted permissions, so all four users can read and write to this directory. Get all four accounts to reference this library instead of the external or local home locations I am hoping I can just check the box to keep library organized in my account, which is the admin and let iTunes move it all. Then delete current libraries for each account and re-add from the new shared location. Will the iTunes organization process cause permissions issues either by setting permissions to all the files access to my account only or write permissions or any other 'gotcha'? I am having a hard time coming up with a smooth solution that won't break everything and cause me to have mega duplicates or access issues. I would prefer not to do any XML library file editing if possible. Am I dreaming?

  Read the article

• Can't get DNS Alias work on Ubuntu 10.04 with Apache 2

  - by Johnny

  I want to use the DNS Alias to configure one of my domain pointing to a specific directory on the server. Here is what I've done: Change the IP address in domain setting, and it works $ ping www.example.com PING example.com (124.205.62.xxx): 56 data bytes 64 bytes from 124.205.62.xxx: icmp_seq=0 ttl=48 time=53.088 ms 64 bytes from 124.205.62.xxx: icmp_seq=1 ttl=48 time=52.125 ms ^C --- example.com ping statistics --- 2 packets transmitted, 2 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 52.125/52.606/53.088/0.482 ms Add sites-available and sites-enabled $ ls -l /etc/apache2/sites-available/ total 16 -rw-r--r-- 1 root root 948 2010-04-14 03:27 default -rw-r--r-- 1 root root 7467 2010-04-14 03:27 default-ssl -rw-r--r-- 1 root root 365 2010-06-09 18:27 example.com $ ls -l /etc/apache2/sites-enabled/ total 0 lrwxrwxrwx 1 root root 26 2010-06-09 15:46 000-default -> ../sites-available/default lrwxrwxrwx 1 root root 33 2010-06-09 18:17 001-example.com -> ../sites-available/example.com But it doesn't work and when I open the browser for www.example.com, it shows an 111 error: The following error was encountered: Connection to 124.205.62.48 Failed The system returned: (111) Connection refused Here is how example.com's config: $ cat /etc/apache2/sites-enabled/001-example.com <virtualhost *:80> DocumentRoot "/vhosts/example.com/htdocs/" ServerName www.example.com ServerAlias example.com <Location /> Order Deny,Allow Deny from None Allow from all </Location> #Include /etc/phpmyadmin/apache.conf ErrorLog /vhosts/example.com/logs/error.log CustomLog /vhosts/example.com/logs/access.log combined Could you please tell me how to solve this?

  Read the article

• Desktop Provisioning for a Small Linux Software Development Team

  - by deakblue

  Goal: Get a small team using a standard development image rather than 4 software devs setting up their own environments. Why: it takes a day or days to install a distro, build-specific libraries, tools like editors and IDEs, mysql, couchdb, java, maven, python, android-sdk, etc. It's a giant PITA that when repeated 4 times by 4 developers (not sys admins) wastes time and generates annoying divergences that crop up later (it-builds-on-my-box syndrome). There's no sharing of productivity, settings, tricks, scripts, set-ups. Some of this is helped by segregating the build systems into headless virtualbox images. This doesn't really address tooling though or the GUI-desktop dev that needs doing. So I see three basic strategies, ghosting, virtualization, and finally creating a kind of in-house linux distro (I guess Google does something like this). The target dev environment is based on Debian OpenBox and must allow a mix of 3rd gen Core i7 notebooks 8GB-minimum to work both single and multihead. Important, the lappies are not the same, but a mix of 2012 macbooks and PCs. So: virtualization: is doing all of your work within a VM, like VirtualBox, practical on this hardware or annoying. ghosting: will laptops from different manufacturers make this impractical. DIY distro: short of scripting a bunch of package installs, I don't know if there's any "distro-maker" that could keep this from being an epic project of scripting package installs. So any advice?

  Read the article

• should i and how do i backup my database for a webapp that is hosted on amazon ec2 server?

  - by user8184

  I set up an amazon ec2 instance using ubuntu server edition. I install LAMP stack on it. I did up a php web app running on mysql. I have not officially launched, but I need to know this before launching. Should I backup my database data? If so, how should I do it as cost effective as possible? Previously for another web app, i wrote a perl or bash script (cannot remember) that will be executed by cron on a daily basis. The script will then backup the database into a single .sql file and send as email attachment to my gmail account. That web app was on shared hosting hence, I was quite sure i needed to do backup of my database. My files are on git repo so I am not worried about that. Please advise. I am totally unfamiliar with AWS. Only know as much as setting up an account. That is all. Thank you.

  Read the article

• Technology mash: is this possible?

  - by Jon Story

  I'm in the process of setting up my own DNS+hosting on a couple of VPS and my home machines, mostly for academic/learning purposes, but also for convenient accessing of my files, hosting my personal websites, private git repositories etc. I've got a main web server with DNS, and a slave DNS server. I've also got a couple of machines at home doing file hosting, video streaming and all that fun stuff. I'm intending to use my VPS's to provide myself with a dynamic DNS system so that I can point mydomain.com at my DNS servers, with home.mydomain.com going into my home network via a raspberry pi. HOWEVER.... I've not got access to the network infrastructure at home (rented accommodation with managed internet), so I can't forward the ports on the router to my own machines. As such, I'm wondering if it's possible to route all the traffic via an SSH/HTTP tunnel through one of the VPS? My plan is to have the raspberry pi provide a VPN into my home network. The raspberry pi uses SSH to connect to the VPS, and the VPS forwards any traffic to home.mydomain.com via the tunnel to the raspberry pi. Is this even possible, and how do I go about it? I don't mind getting my hands dirty with coding and low level tools, I'm just not sure where to start or what the best way to go about it is.

  Read the article

< Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >