Search Results

Search found 14154 results on 567 pages for 'sp send dbmail'.

Page 448/567 | < Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >

• How do I tell Websphere 7 about a front end load balancer so that re-directs are handled correctly?

  - by TiGz

  On WebLogic 11G I can use the console to set the FrontendHost and FrondendPort on a server or on a cluster so that re-directs are handled correctly and end up resolving to the front end load balancer instead of the local host. The MBeans associated with this on WebLogic are, for example: MBean Name com.bea:Name=AdminServer,Type=WebServer,Server=AdminServer Attribute Name FrontendHost Description The name of the host to which all redirected URLs will be sent. If specified, WebLogic Server will use this value rather than the one in the HOST header. Sets the HTTP frontendHost Provides a method to ensure that the webapp will always have the correct HOST information, even when the request is coming through a firewall or a proxy. If this parameter is configured, the HOST header will be ignored and the information in this parameter will be used in its place. Type java.lang.String Readable / Writable RW How is the same thing achieved under Websphere 7? Follow up info: So I have 2 use cases actually. One is that I have a web app running under WebSphere on host A on port 9002 and a LB running on host B at port 80, when I visit the home page of the app via the LB on http://hostb/app the app redirects my browser to http://hostb:9002/app and it 404's I think this is WebSphere's fault but I guess it could be the app's fault? The second is that the web app in question needs to send emails containing URls that the customer can click on to get back into the web app - obviously this needs to be via the LB. On WebLogic the app uses MBeans to derive the LB url and I was hoping to use a similar mechanism on WebSphere.

  Read the article

• debian lenny email server

  - by Dal

  Hi I am a newbie and set up a debian lenny at home and set up the web and email server in the default installation. I followed the instructions for Exim and ran dpkg-reconfigure exim4-config and set it up for mydomainhere.com. I created a one line message file and attempted to test exim by running the command exim [email protected] < msgfile. I also tried using exim4 Exim but i get same error -bash: Exim: command not found. Obviously I am ignorant on how to run exim and test. I also tried to run a php file that sends a test mail and had no success. That script is tested and works fine if I send it from my hosting isp on a different domain. So I know the php script is good. I set up the debian system behind a netgear firewall and uses 192.168.1.x ip . The web server works great and users can visit my site. But I am lack the knowledge on how to get the email working. Appreciate is someone can guide me.

  Read the article

• How can I make my Super keys (Windows Key) behave more like Ctrl/Alt/Shift in Linux

  - by deltaray

  After using the Ctrl + "arrow keys" for 13 years to switch virtual desktops in X windows, I've been convinced recently to change to using the Super keys instead (the windows key and the context menu key, which I've remapped). This all works fine for the most part. However, something is still picking up the key events that these keys are sending as if they are a normal alphanumeric like key. For example, I first noticed this in Google Docs spreadsheet that if I press the windows key alone over top of a cell, that it starts editing that cell. It doesn't insert anything, it just sends a key event that Firefox sees and starts editing the cell. This caused problems on a collaborative document I was working on as the way Google docs works, it led to me accidentally erasing the data in a few fields before I realised what was going on. I like using the super keys, but I want them to behave more like a Ctrl or Alt key does in that its a modifier key and doesn't send anything until a second key is pressed. My setup is the following: Ubuntu 10.10 XFCE 4 Microsoft Natural Ergo 4000 keyboard (with the logo scratched out) The following is my .Xmodmap file: remove Lock = Caps_Lock keycode 66 = Escape ! The below maps my other windows context menu key. keycode 135 = Super_R Edit: As requested, here is the relevant output from xev for a keypress and keyrelease of my Super_L (left windows key) KeyPress event, serial 34, synthetic NO, window 0x8200001, root 0x15d, subw 0x0, time 2428849342, (177,174), root:(182,228), state 0x10, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 34, synthetic NO, window 0x8200001, root 0x15d, subw 0x0, time 2428849430, (177,174), root:(182,228), state 0x50, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False

  Read the article

• is there a man in the middle attacking to my server machine?

  - by GongT

  My server works well about half a year. But a strange thing happened (several hours before). This server has two IP-address 58.17.85.19 & 117.21.178.19 When I navigate to http://58.17.85.19, nothing different as before. But http://117.21.178.19 will return a "302 Object moved" and become a "redirect loop" I do some test: ($cmd = "wget http://117.21.178.19/?xx=$RANDOM --max-redirect 0 -S --no-cache -O -") Step by step: run $cmd on my PC and my firend's one (we live in two side of China, far away). - got 302 run $cmd on this server - got 200 OK (content is correct result of index.php) run $cmd on another server in same computer room - got 200 OK telnet from my PC and build an HTTP request (type by hand) - got 200 OK shutdown php-fpm, run $cmd on my PC - got 302 run $cmd on server - 502 Bad Gateway shutdown nginx, run $cmd on both the server and my PC - Connection refused. create iptables rule, refuse any connection to 58.17.85.19:80. run nc -l 80 -k -vvv on server and run $cmd on my PC NC show me that.... Server accept connection (Connection from [my ip]) My connection closed ! (Remove fd xx from list) wget dump out response - got 302 I know that, normaly, NC will accept connection, then dump HTTP request from client, and client will wait for response. this connection will open forever(infact client will close connection becouse timeout), becouse NC can't give any response. So... where my request gone? who send an response to the client? some virus on my server system? If so, why 58.17.85.19 didn't has this error? or... I was attacked by a middleman?

  Read the article

• Cannot ssh into server

  - by revolver

  I am trying to SSH into a linux machine running ubuntu, but the interactive shell stuck somewhere and I can't key in anything. I am on Mac OS X Lion. This only happens when I am trying to access via an external IP. Local LAN SSH is working perfectly. macbook:~ user$ ssh -v -v user@serverip // i skipped the rest of the log, but I can paste it here again if needed. Authenticated to serverip debug1: channel 0: new [client-session] debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug1: Sending env LC_CTYPE = UTF-8 debug2: channel 0: request env confirm 0 debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 My terminal shell just hang after this, and I can't key in anything. I checked var/log/auth on the server and saw that the a session is being created and I had already logged in, but I don't see any responses on my client machine. I googled around and a lot of the solution had to do with the Broadcom wireless driver, but I am not even using one, so I am pretty clueless here. To give you more information, the linux machine is also running a web server, and I have no problem accessing the web server. Thanks. Any help is appreciated.

  Read the article

• linux networking: how to redirect incoming connections from old server to new server?

  - by aliz

  hi I'm in the process of moving my old server to a new server, but i will keep the old server running for database replication and load balancing, etc. each server has a separate internet connection with a static ip, and they are connected through a local Ethernet connection. I've got Ubuntu 8.04 32-bit running on old server and Debian 6.0 64-bit on new one. shorewall firewall is installed on both servers. there are some outdoor devices which are periodically sending data to port 43597 for old server IP address. I can run multiple instances of the network service which is responsible for receiving data from devices on a server but on different ports. here's the question: how can I run the service on new server and have connections coming to old server redirected to it, and new devices can still connect to new server's IP address preferably on the same port and same service? until all devices get updated to send to new server. I've tried a shorewall DNAT rule, but seems like new server's default route should be changed to ethernet connection, which breaks other things. I also found about redir utility, but still haven't tried it. is there any best practice or simple solution for such a scenario, i'm not aware of? thanks in advance.

  Read the article

• /etc/hosts: What is loghost? (fresh install of Solaris 10 update 9)

  - by cjavapro

  # # Internet host table # ::1 localhost 127.0.0.1 localhost XX.XX.XX.XX myserver loghost What is the purpose of loghost? If it was not for having loghost in there, all the /etc/hosts files on all the servers in this particular network could be identical. Edit: I looked at /etc/syslog.conf #ident "@(#)syslog.conf 1.5 98/12/14 SMI" /* SunOS 5.0 */ # # Copyright (c) 1991-1998 by Sun Microsystems, Inc. # All rights reserved. # # syslog configuration file. # # This file is processed by m4 so be careful to quote (`') names # that match m4 reserved words. Also, within ifdef's, arguments # containing commas must be quoted. # *.err;kern.notice;auth.notice /dev/sysmsg *.err;kern.debug;daemon.notice;mail.crit /var/adm/messages *.alert;kern.err;daemon.err operator *.alert root *.emerg * # if a non-loghost machine chooses to have authentication messages # sent to the loghost machine, un-comment out the following line: #auth.notice ifdef(`LOGHOST', /var/log/authlog, @loghost) mail.debug ifdef(`LOGHOST', /var/log/syslog, @loghost) # # non-loghost machines will use the following lines to cause "user" # log messages to be logged locally. # ifdef(`LOGHOST', , user.err /dev/sysmsg user.err /var/adm/messages user.alert `root, operator' user.emerg * ) Very interesting. when shutting down,, alerts go to all users probably through *.emerg * Looking at ifdef, it seems that the first parameter checks to see if current machine is a loghost, second parameter is what to do if it is and third parameter is what to do if it is not. Edit: If you want to test a logging rule you can use svcadm restart system-log to restart the logging service and then logger -p notice "test" to send a test log message where notice can be replaced with any type such as user.err, auth.notice, etc.

  Read the article

• Software for RAID Failure Alerts?

  - by QF_Developer

  I have two 256 GB Samsung 840 Pro SSD disks in a RAID 1 array. I would like to receive a notification if one of the disks in the array fails. Can anybody recommend an application I can install on the server to fire an email if such an event occurs? Here are some additional specs: Supermicro X9SCM-IIF motherboard utilising the hardware RAID controller. OS = Windows 2012 Standard Also is it possible to simulate a disk failure by pulling it out of the bay? SSDs appear to fail close together when in a mirrored config so I'd like to know ASAP if one goes down so I can swap them out with minimum delay. UPDATE 26th June 2013 ------------------------ None of the software that ships with the Supermicro X9SCM-* motherboards offer support for RAID monitoring. As has been pointed out here, these boards are built on an Intel chipset for RAID and so I installed Intel Rapid Storage Technology that supports automated email notifications on RAID failure http://www.intel.com/support/chipsets/imsm/sb/cs-020784.htm One small issue, the software only allows you to send email notifications without SMTP authentication. There's a bunch of different workarounds here: http://communities.intel.com/thread/30771

  Read the article

• TCP/UDP hole punching from and to the same NAT network

  - by Luc

  I was wondering if tcp/udp hole punching would still work when you are in the same network (behind a NAT), and what the packet's path would be. What happens when using hole punching on the same network, is that it will send a packet out with the same destination and source address. Only the source and destination port would differ. I imagine a router with NAT loopback enabled will handle this as it should, but how about other routers? Would they drop the packet, or would a router (the first?) from the ISP bounce the packet back after which it gets handled okay? I'm wondering because I was thinking about using this technique to circumvent a block between peers in a network (like a school network where clients can only access the internet, but any contact with each other is blocked). The only other option is to use a man in the middle as proxy (tunnel?). The disadvantage of this is that you have to have a server with significantly more bandwidth than one that would only do hole punching. Also the latency would increase significantly.

  Read the article

• Enabling http access on port 80 for centos 6.3 from console

  - by Hugo

  Have a centos 6.3 box running on Parallels and I'm trying to open port 80 to be accesible from outside tried the gui solution from this post and it works, but I need to get it done from a script. Tried to do this: sudo /sbin/iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT sudo /sbin/iptables-save sudo /sbin/service iptables restart This creates exactly the same iptables entries as the GUI tool except it does not work: $ telnet xx.xxx.xx.xx 80 Trying xx.xxx.xx.xx... telnet: connect to address xx.xxx.xx.xx: Connection refused telnet: Unable to connect to remote host UPDATE: $ netstat -ntlp (No info could be read for "-p": geteuid()=500 but you should be root.) Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:37439 0.0.0.0:* LISTEN - tcp 0 0 :::111 :::* LISTEN - tcp 0 0 :::22 :::* LISTEN - tcp 0 0 ::1:631 :::* LISTEN - tcp 0 0 :::60472 :::* LISTEN - $ sudo cat /etc/sysconfig/iptables # Generated by iptables-save v1.4.7 on Wed Dec 12 18:04:25 2012 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [5:640] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT # Completed on Wed Dec 12 18:04:25 2012

  Read the article

• Exim, hot to route local mail to other adress

  - by kheraud

  I have setuped an Exim4 server on my debian wheezy server. This mail server only sends mail coming from localhost. The purpose is sending mail for my website. I have cron tasks and other services generating mails for root user. These mails are not stored in /var/mail as before, but sent by exim to [email protected]. I try to make exim send mails for root to [email protected] rather than [email protected]. I tried adding a .forward in /root with [email protected] as content. I tried also changing /etc/aliases with root: [email protected]. The fact is that routing works for root@localhost but not for root which is resolved as [email protected] I tested how routing is resolved with exim -bt : root@srv02:~# exim -bt root@localhost R: system_aliases for root@localhost R: dnslookup for [email protected] [email protected] <-- root@localhost router = dnslookup, transport = remote_smtp host gmail-smtp-in.l.google.com [173.194.67.27] MX=5 host alt1.gmail-smtp-in.l.google.com [74.125.143.27] MX=10 host alt2.gmail-smtp-in.l.google.com [74.125.25.27] MX=20 host alt3.gmail-smtp-in.l.google.com [173.194.64.27] MX=30 host alt4.gmail-smtp-in.l.google.com [74.125.142.27] MX=40 root@srv02:~# exim -bt root R: dnslookup for [email protected] [email protected] router = dnslookup, transport = remote_smtp host aspmx.l.google.com [173.194.78.27] MX=1 host alt1.aspmx.l.google.com [74.125.143.27] MX=5 host alt2.aspmx.l.google.com [74.125.25.27] MX=5 host alt4.aspmx.l.google.com [74.125.142.27] MX=10 host alt3.aspmx.l.google.com [173.194.64.27] MX=10 I bet this is a matter of how my server is configured (rather than how exim is configured). But to understand well I would like to have a solution for both : how to have root resolved as root@localhost ? how to have [email protected] routed to [email protected] ?

  Read the article

• Sendmail slow to accept emails

  - by Rich

  I have a PHP web app which is using SMTP to sendmail on localhost to send email. I would like sendmail to accept the mail request immediately and queue it for later sending, as I don't want to have user-facing request threads blocked on emails. Sendmail is installed with the default settings on RHEL web servers. Sometimes sendmail is blocking for a long time after the MAIL command is sent -- sometimes taking 60 or 90 seconds to accept the mail. The time take is usually very close to 60 or 90 sec, which makes me think this is some kind of timeout. I have looked in the sendmail logs, and there are plenty of "deferred" emails, but nothing which looks responsible for this delay. How can I diagnose what is slowing down sendmail? How can I configure sendmail to always accept the mail immediately and to queue the mail for later sending? Update: I'm not sure, but it looks like this might be linked to aol.com addresses. I strongly suspect that sendmail is doing some kind of blocking receipient address verification at the accept-email-for-sending stage. How can I disable that, so that sendmail doesn't block my UI threads? Update 2: This only seems to happen at busy times. Perhaps I am running out of sendmail threads or something? How can I check that?

  Read the article

• One workstation gets slow access to the server, but others are fast

  - by Mike Hanson

  I've just setup a machine with Windows Server 2008. It hosts various services, like IIS, POP3, SMTP, Music for Squeezeboxes, VNC. All was working well for the first week or so. One day I needed to create a mapped drive on the server, so it could access files on my workstation. Windows indicated that Network Discovery was needed, so I turned it on with the "Home / Office" option (rather than "Public"). This may be coincidence, but since that time I've been having troubles accessing various services from my main workstation (running Windows 7/64): POP3 continued working correctly, but SMTP was delayed or failed entirely. (Telnet took 20 seconds to connect, but Outlook would never send messages.) VNC failed entirely. I reinstalled it on the server, and now it works but feels sluggish. The music web server was extremely delayed and usually failed. I tried reinstalling, and now it takes about 30 seconds to show the page name on the browser tab, and another 30 seconds to display any page contents. Other machines on the local network seem fine, as do machines connected via the Internet. I don't believe I changed anything on my own machine that would cause this. I considered the possibility that my anti-virus was involved, so I uninstalled AVG (commercial version), but that didn't help. I installed Norton 360 after that, and it didn't complain of viruses on my machine, and the delays remained. Because only my machine is affect, I'm tempted to blame it, except that reinstalling software on the server improved the situation, so there is almost certainly something going on with the server too. The firewall has all the necessary ports open, and it works fine for the other workstations (including external machines connected via the Internet), which indicates that it should be OK. Any ideas?

  Read the article

• Outlook 2010 Crashing Unpredictably

  - by cbkadel

  Very often when I open up Outlook 2010 and start doing actions in it, it will hang and become non responsive. I have tried letting it finish, but it never does come back (up to 20 minutes of letting it try). I generally have to restart Outlook and try again. Usually after about an hour of doing this, Outlook somehow snaps out of it and works for the rest of the day. It's generally in the morning (though I doubt that's the key variable). Generally, the emails that cause problems are HTML/formatted, but not always. What I've done so far to troubleshoot: Install Latest Outlook Hotfix (I think Dec 14, 2010) Start Outlook in Safe Mode Neither of those steps seem to make a difference. Usually - after about 10-15 restarts of Outlook on any given day, then it starts working thereafter. My next step is to uninstall/reinstall Office 2010, but I'm hoping someone has seen this and knows what to do about it - though not sure. My configuration is like this: Microsoft Online Services (using Microsoft's Sign In App) - Connecting to Exchange I have two other Exchange accounts in this profile (new feature in 2010) connected through Outlook Anywhere. Life Meeting Conferencing Add In I've disabled the People tab/add in. I've disabled the "Send to Bluetooth" add-in. Not sure what else to do?

  Read the article

• Tuning Linux + HAProxy

  - by react

  I'm currently rolling out HAProxy on Centos 6 which will send requests to some Apache HTTPD servers and I'm having issues with performance. I've spent the last couple of days googling and still can't seem to get past 10k/sec connections consistently when benchmarking (sometimes I do get 30k/sec though). I've pinned the IRQ's of the TX/RX queues for both the internal and external NICS to separate CPU cores and made sure HAProxy is pinned to it's own core. I've also made the following adjustments to sysctl.conf: # Max open file descriptors fs.file-max = 331287 # TCP Tuning net.ipv4.tcp_tw_reuse = 1 net.ipv4.ip_local_port_range = 1024 65023 net.ipv4.tcp_max_syn_backlog = 10240 net.ipv4.tcp_max_tw_buckets = 400000 net.ipv4.tcp_max_orphans = 60000 net.ipv4.tcp_synack_retries = 3 net.core.somaxconn = 40000 net.ipv4.tcp_rmem = 4096 8192 16384 net.ipv4.tcp_wmem = 4096 8192 16384 net.ipv4.tcp_mem = 65536 98304 131072 net.core.netdev_max_backlog = 40000 net.ipv4.tcp_tw_reuse = 1 If I use AB to hit the a webserver directly I easily get 30k/s connections. If I stop the webservers and use AB to hit HAProxy then I get 30k/s connections but obviously it's useless. I've also disabled iptables for now since I read that nf_conntrack can slow everything down, no change. I've also disabled the irqbalance service. The fact that I can hit each individual device with 30k/s makes me believe the tuning of the servers is OK and that it must be some HAProxy config? Here's the config which I've built from reading tuning articles, etc http://pastebin.com/zsCyAtgU The server is a dual Xeon CPU E5-2620 (6 cores) with 32GB of RAM. Running Centos 6.2 x64. The private and public interfaces are on separate NICS. Anyone have any ideas? Thanks.

  Read the article

• certificate SSH login does not work on 22 but other port

  - by Hugo

  On my Red Hat server, the sshd will not accept my correct certificate login. However, If i start another sshd on another port, it works! (I assume the second sshd loads the same configruation files.) second sshd started with: sudo /usr/sbin/sshd -p 54321 -d #-d is optional and prints debug output ssh strange-host -p 22 -vvv prints: debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Offering public key: /home/me/.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug3: Wrote 528 bytes for a total of 2389 debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug2: we did not send a packet, disable method debug3: authmethod_lookup password ssh strange-host -p 54321 -vvv prints: debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Offering public key: /home/me/.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug3: Wrote 528 bytes for a total of 2389 debug1: Server accepts key: pkalg ssh-dss blen 433 debug2: input_userauth_pk_ok: SHA1 fp 0f:1c:df:27:f7:86:49:a8:47:7e:7f:f3:32:1c:7d:04:a3:73:a5:72 So the question is why the difference? I have thought of no way to get any helpful logging from the "standard" sshd to troubleshoot the problem.

  Read the article

• Using screen to monitor non-interactive scripts (or some other solution)

  - by Michael

  I have some autonomous scripts that run commands on remote machines over ssh. These scripts rely on getting stdout, stderr, and the return code of each command run. I want to be able to monitor the progress of the scripts on each target machine so that I can see if something has hung and possibly intervene if necessary. My initial idea was to have the scripts run commands in a screen session, so that the person monitoring could simply attach to the session with screen -x. However, it was hard to do that from a script since screen is an interactive program. I can send a command to the screen session with screen -S session -X stuff "command^M", but then I don't get the output and return code that I need back. My second idea was to put script /path/to/log in ~/.bash_profile and log the entire session to a file. Then the monitoring person could simply tail the log file. However, this doesn't provide the interactivity that I was looking for. Any ideas on how to solve this problem?

  Read the article

• How do I setup a secondary incoming mail server?

  - by abrahamvegh

  I currently have a server running Debian 6, with postfix and dovecot handling email. This server hosts email for a number of domains and users, so I use MySQL as my backing store for users and forwardings and everything related. Currently, this server is the only server listed in an MX record for all of the domains it serves. I would like to create a secondary server that would be listed in the DNS with a lower priority (e.g. current primary server is priority 5, secondary would be priority 10), so that in the event that I need to reboot the primary server, or otherwise make it unavailable, the secondary server would receive email, and hold it until the primary server came back up, at which point it would deliver any held email to the primary server. I do not need the secondary server to function as a backup sending server. Users would never need to see the secondary server, they would simply not lose incoming emails if the primary server is down, and they would be unable to send or receive until the primary came back up. How would I go about doing this? I would like to use the same software if they can handle this task, because I’m already familiar with managing them.

  Read the article

• Can next hop address be same as destination address?

  - by Raj

  Like if host address is 100.0.0.1 and next hop address is 100.0.0.2 and destination ip address is also 100.0.0.2 Is this a valid use case? Any real life usage? <dest ip> <next hop> ip route 100.0.0.2 255.255.255.255 100.0.0.2 weight 1 next-hop-vrf GlobalRouter Above is the command on a router inside a VRF. 100.0.0.2 is pingable from host. 100.0.0.1 & 100.0.0.2 are an ip address assigned to a VLAN on host & destination respectively. On a linux box, Such configuration is valid. [root]# netstat -r -n Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 55.55.55.55 55.55.55.55 255.255.255.255 UGH 0 0 0 eth0 [root]# ip route show 55.55.55.55 via 55.55.55.55 dev eth0 As per my understanding, If a destination IP is reachable (i.e in the same subnet of host IP) we dont need a next hop. I came across one application for using next hop for destination IP in same subnet (i.e for VPN) See this: Will packets send to the same subnet go through routers? If next hop != destination IP but they are in same subnet as that of host, is a valid scenario for VPN, then i am wondering what are the applications of next_hop==dest_ip & subnet same as host? This is my first post in Super User. Extremely happy with the quick and warm response.

  Read the article

• Permissions error when creating desktop shortcut

  - by Ryan M.

  Hey guys, I have a user that's got a weird permissions problem on Windows 7. He's trying to create a shortcut for Outlook on his desktop(he doesn't want it in his start menu or his taskbar...). If we right click the outlook.exe and do Send to Desktop, it works just fine. If we do a search for "outlook" in the search bar, and then try and drag and drop the outlook icon to the desktop, we get the error message "You need Permission to perform this action. You require permission from SYSTEM to make changes to this file: Microsoft Office Outlook 2007". Dragging and dropping other exe's onto the desktop work just fine. They create shortcuts without any problems. But if I try to do ANY of the Office programs (Word, Excel, Outlook, etc..) I get this permission error. Any ideas? He's using an A.D. account and he's in the local administrators group. He's an executive so he's not accepting "this isn't a real problem because I found another way to make a shortcut" as an answer. Any help is appreciated.

  Read the article

• postfix email gateway

  - by k-h

  I am setting up a postfix email gateway. It will not hold any mail but will accept email for my domain and forward it to another internal mailserver and relay mail out from the internal server. One of the main problems is that I am working on a live running system and this will be an upgrade so I am using a test domain which I will change at some point to the real domain. I tried various methods but found the simplest way (that worked) was to use a script to create an aliases file (from ldap entries). There are various problems with this method. The main one being that the entries can't be of the simple form [email protected] because the gateway doesn't know where to send them. They have to be of the form: [email protected]. What I would like doesn't seem hard but I can't get my head around the postfix documentation. There seem to be various ways but none of them seem to work. Most of the examples I have found on the web assume the mail is going to end up on the server. I want a list of users somewhere, preferably of the form: user1, user2, etc rather than [email protected] (I can easily generate this list) and I would like postfix to forward all email to example.com to a particular server: ie realmailserver.example.com. Can anyone suggest clues as to how I might do this?

  Read the article

• Uploading to another domain gives HTTP code 405

  - by dragon112

  I'm trying to upload a file (which can be quite large) from the website of one server to the backend of another server using plupload. Lets say: domain 1 = http://www.websitedomain.com/uploadform domain 2 = http://www.backenddomain.com/uploadhandler Trying to upload i send the following: OPTIONS /main/uploadnetwork.php HTTP/1.1 Host: backenddomain.com Connection: keep-alive Access-Control-Request-Method: POST Origin: http://www.websitedomain.com User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.79 Safari/537.4 Access-Control-Request-Headers: origin, content-type Accept: */* Referer: http://www.websitedomain.com/uploadform Accept-Encoding: gzip,deflate,sdch Accept-Language: nl-NL,nl;q=0.8,en-US;q=0.6,en;q=0.4 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 DNT: 1 But when I try to start the upload the server returns the following: HTTP/1.1 405 Method Not Allowed Allow: GET, HEAD, OPTIONS, TRACE Content-Type: text/html Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET X-Powered-By-Plesk: PleskWin Date: Mon, 01 Oct 2012 12:41:57 GMT Content-Length: 999 After doing some research I found out that a browser does this to check if the server will accept the intended message. It looks like my server doesn't feel like accepting a simple POST call even tho i use post all the time. The Google Chrome console gives the following error: XMLHttpRequest cannot load http://www.backenddomain.com/uploadhandler. Origin http://www.websitedomain.com is not allowed by Access-Control-Allow-Origin. Does anyone know how to stop the browser from checking or how i can tell my server to just accept the POST?

  Read the article

• What kind of server configuration is best for a chatting app? [closed]

  - by mohabitar

  I'm just now starting to go deeper into the world of cloud hosting and databases, and am getting overwhelmed by how deep this information goes. It's all a little too much to consume in a short amount of time. I get a lot of pricing information, but I'm unable to determine what that means to me. I'm making what you might compare to an email app. Users can send messages to one another. I just don't understand, out of the several options, what would be ideal for an app like this, where users would be constantly sending and receiving text data. With Amazon DynamoDB, I have to specify a pre-defined throughput with number of reads and writes per second. Sure I can just type 50, but I'm not exactly sure what 50 writes per second represents. I'm trying to determine what would be the most cost efficient solution, and I want to know what a throughput of 50 reads/writes/second compares to. Is that a high number? What is a good throughput number for a message sending app with say 50,000 daily users? I'm just providing specific numbers so I can understand what these throughput numbers represent. 100 transactions/second to me seems like a small number since I'm not familiar with this stuff, so I'm just looking to bring everything in context. What would 100 read/write/second be useful for? Are there any average example values available? And I'm not sure what each service is good for. For a message sending app, is there any reason I'd want to choose say Amazon DynamoDB over Google App Engine? Any insight would be greatly appreciated.

  Read the article

• Running computer from separate room

  - by Dan

  I want my computer to be in the basement, but to use it on the first floor. Which cables should I run through the floor? Can some be wireless or other methods? Here are some of the options I've thought of: Basic: Run DVI, usb (mouse), usb (keyboard), and audio cable (4 cables) USB Hub option: Run DVI, and 1 usb, then using a usb hub split it into mouse, keyboard, maybe even audio (2-3 cables) HDMI Option: If I get a new video card and monitor that supports HDMI, would I be able to run both audio and video through it? Would the monitor have to have an audio out? Also there is a lot of extra bandwidth in the HDMI cables, could I send two monitors on 1 cable or would I have to use 2 cables? How about sending mouse/keyboard through the HDMI cable? I see a lot of monitors with USB hubs built in, but I assume I'd still have to wire HDMI + 1 USB cable to use the USB hubs? X Terminal Machine/Thin Client: I don't really know much about this option. Not sure if it would allow me to run graphics acceleration and watch movies, does anyone know more details about what this would allow me to do? Other options: Any other ways to do this? Can any of this be wireless?

  Read the article

• if I define `my_domain`, postfix does not expand mail aliases

  - by Norky

  I have postfix v2.6.6 running on CentOS 6.3, hostname priest.ocsl.local (private, internal domain) with a number of aliases supportpeople: [email protected], [email protected], [email protected] requests: "|/opt/rt4/bin/rt-mailgate --queue 'general' --action correspond --url http://localhost/", supportpeople help: "|/opt/rt4/bin/rt-mailgate --queue 'help' --action correspond --url http://localhost/", supportpeople If I leave postfix with its default configuration, then the aliases are resolved correctly/as I expect, so that incoming mail to, say, [email protected] will be piped through the rt-mailgate mailgate command and also be delivered (via the mail server for ocsl.co.uk (a publicly resolvable domain)) to [email protected], user2, etc. The problem comes when I define mydomain = ocsl.co.uk in /etc/postfix/main.cf (with the intention that outgoing mail come from, for example, [email protected]). When I do this, postfix continues to run the piped command correctly, however it no longer expands the nested aliases as I expect: instead of trying to deliver to [email protected], user2 etc, it tries to send to [email protected], which does not exist on the upstream mail server and generates NDRs. postconf -n for the non-working configuration follows (the working configuration differs only by the "mydomain" line. alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 html_directory = no inet_interfaces = all inet_protocols = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost mydomain = ocsl.co.uk newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550 We did have things working as we expected/wanted previously on an older system running Sendmail.

  Read the article

< Previous Page | 444 445 446 447 448 449 450 451 452 453 454 455  | Next Page >