Search Results

Search found 18209 results on 729 pages for 'loop device'.

Page 449/729 | < Previous Page | 445 446 447 448 449 450 451 452 453 454 455 456  | Next Page >

• Windows 8 will only recognize the Blu Ray ROM, if the install disk is present at boot time [migrated]

  - by aceinthehole

  If I have the install disk in the blu ray ROM drive at boot time and subsequently remove the disk and replace it with blu ray media everything functions as I'd expect. However, if I have no media present, or another disk in the drive at boot time, then windows 8 does not seem to recognize that the blu ray player is even present in the computer. It is not present in the 'my computer' screen, device manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expect, what is it about having the windows 8 install disk in the drive or not that would cause this kind of behavior?

  Read the article

• Accessing a broken mdadm raid

  - by CarstenCarsten

  Hi! I used a western digital mybookworld (SOHO NAS storage using Linux) as backup for my Linux box. Suddenly, the mybookworld does not boot up any more. So I opened the box, removed the hard disk and put the hard disk into an external USB HDD case, and connected it to my Linux box. [ 530.640301] usb 2-1: new high speed USB device using ehci_hcd and address 3 [ 530.797630] scsi7 : usb-storage 2-1:1.0 [ 531.794844] scsi 7:0:0:0: Direct-Access WDC WD75 00AAKS-00RBA0 PQ: 0 ANSI: 2 [ 531.796490] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 531.797966] sd 7:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 531.800317] sd 7:0:0:0: [sdc] Write Protect is off [ 531.800327] sd 7:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 531.800333] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803821] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803836] sdc: sdc1 sdc2 sdc3 sdc4 [ 531.815831] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.815842] sd 7:0:0:0: [sdc] Attached SCSI disk The dmesg output looks normal, but I was wondering why the hardisk was not mounted at all. And why there are 4 different partitions on it. fdisk showed the following: root@ubuntu:/home/ubuntu# fdisk /dev/sdc WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdc: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00007c00 Device Boot Start End Blocks Id System /dev/sdc1 4 369 2939895 fd Linux raid autodetect /dev/sdc2 370 382 104422+ fd Linux raid autodetect /dev/sdc3 383 505 987997+ fd Linux raid autodetect /dev/sdc4 506 91201 728515620 fd Linux raid autodetect Oh no! Everything seems to be created as a mdadm software raid. Calling mdadm --examine with the different partitions seems to affirm that. I think the only partition I am interested in, is /dev/sdc4 (because it is the largest). But nevertheless I called mdadm --examine with every partition. root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc1 /dev/sdc1: Magic : a92b4efc Version : 00.90.00 UUID : 5626a2d8:070ad992:ef1c8d24:cd8e13e4 Creation Time : Wed Feb 20 00:57:49 2002 Raid Level : raid1 Used Dev Size : 2939776 (2.80 GiB 3.01 GB) Array Size : 2939776 (2.80 GiB 3.01 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 1 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 4c90bc55 - correct Events : 16682 Number Major Minor RaidDevice State this 0 8 1 0 active sync /dev/sda1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc2 /dev/sdc2: Magic : a92b4efc Version : 00.90.00 UUID : 9734b3ee:2d5af206:05fe3413:585f7f26 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 104320 (101.89 MiB 106.82 MB) Array Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 2 Update Time : Wed Oct 27 20:19:08 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 55560b40 - correct Events : 9884 Number Major Minor RaidDevice State this 0 8 2 0 active sync /dev/sda2 0 0 8 2 0 active sync /dev/sda2 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc3 /dev/sdc3: Magic : a92b4efc Version : 00.90.00 UUID : 08f30b4f:91cca15d:2332bfef:48e67824 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 987904 (964.91 MiB 1011.61 MB) Array Size : 987904 (964.91 MiB 1011.61 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 3 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 39717874 - correct Events : 73678 Number Major Minor RaidDevice State this 0 8 3 0 active sync 0 0 8 3 0 active sync 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc4 /dev/sdc4: Magic : a92b4efc Version : 00.90.00 UUID : febb75ca:e9d1ce18:f14cc006:f759419a Creation Time : Wed Feb 20 00:57:55 2002 Raid Level : raid1 Used Dev Size : 728515520 (694.77 GiB 746.00 GB) Array Size : 728515520 (694.77 GiB 746.00 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 4 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 2f36a392 - correct Events : 519320 Number Major Minor RaidDevice State this 0 8 4 0 active sync 0 0 8 4 0 active sync 1 1 0 0 1 faulty removed If I read the output correctly everything was removed, because it was faulty. Is there ANY way to see the contents of the largest partition? Or seeing somehow which files are broken? I see that everything is raid1 which is only mirroring, so this should be a normal partition. I am anxious to do anything with mdadm, in fear that I destroy the data on the hard disk. I would be very thankful for any help.

  Read the article

• Excluding four IP's from a /32 static route

  - by Justin

  I have a Cisco ASA routing a /32 of public addresses (non RFC-1812) through a private link. When the device sees the destination address it selects the private route instead of going out over the public network. This works great but I am now trying to exclude 4 IP's from the private route. Traffic to these addresses should go over the public internet instead of being routed over the private network. Can I just add anothe route for these four IP's or do I have to modify the existing route for the /32?

  Read the article

• What does the NTFS encryption protect against?

  - by Ray

  I have encrypted a folder from the (PropertiesAdvancedEncrypt contents to secure data). However when I change my user profile to another one which is also an administrator the folder seems to be accessible as if nothing happened. What exactly does this encryption protect against. I'm looking to encrypt folders that no other user, or another OS or even if the HDD were to be removed and plugged to another device will be accessible. My OS is Windows 7 Ultimate. Any suggestions?

  Read the article

• Small WiFi Network In a Noisy Environment

  - by Sam Skuce

  My company is demoing our network enabled products at big conferences. For this purpose, we would like to be able to set up a small WiFi network in our booth with a range of less than 10 meters. We will only be connecting the device that we are demoing and the iPad or PC running our demo software. I understand that there are conferences that won't allow you to run your own WiFi equipment, but some fairly big ones do (e.g. IMTS, which we were just at). I know that the AP should be encrypted and not broadcast its SSID, but are there additional equipment considerations to deal with the high level of RF noise in such an environment? Is there a particular technology that I should be looking at?

  Read the article

• Require file for mount and also update the file after mount?

  - by Andy Shinn

  I am trying to make sure a directory exists for a mount and then also update the permissions of that directory after the mount happens. I am receiving the following error: err: Failed to apply catalog: Cannot alias File[pre_eos_mount] to ["/var/tmp/eos"] at /etc/puppet/modules/mymodule/manifests/eos.pp:29; resource ["File", "/var/tmp/eos"] already declared at /etc/puppet/modules/mymodule/manifests/eos.pp:47 I would like to do something like this: file { $eos_mount : ensure = 'directory', mode = '1777', owner = 'root', group = 'root', } mount { $eos_mount : ensure = 'mounted', device = $lv_device, fstype = $fstype, options = 'defaults,noatime,nodiratime', require = File[$eos_mount], notify = File['post_eos'], } file { 'post_eos' : path = $eos_mount, ensure = 'directory', mode = '1777', owner = 'root', group = 'root', } What is a way to ensure permissions of a folder after it has been mounted?

  Read the article

• Simple Chat with php

  - by MatrixOnTheLine

  in chat.php $data = getCache($room); while(1){ if($data == false || empty($data[1]) ) sleep(10); else break; } in sendmemcache.php $value = $_GET['value']; setCache($room,array($username,$value)); However, in infinite loop $data's value never change. I send $value with manuel for sendmemcache.ophp. sendmemcache.php never finish its proces. (Always "Transferring data ....") How can i resolve this ?

  Read the article

• Why my USB mouse get suspended after 3 seconds of inactivity?

  - by Vi.

  Mouse's bottom LED goes off after 3 seconds after connection and cursor movements and wheel stops. Pressing any button, reconnecting or resetting USB device resumes it for another 3 seconds (when resumed by pressing button, this event does no go to X). This happens when using any of USB ports. This mouse works well with other computer with Linux. It was working well before. Why can it happen? How to fix it? Update: It happens only if laptop is on battery. Answer: this is caused by powersaving done by laptop-mode-tools. To temporary turn off powersaving one can use for i in /sys/bus/usb/devices/*/power/control; do echo on > $i; done

  Read the article

• Windows boot manager and two hard disks

  - by Pincopallino

  here's my situation: I had an HDD with Windows 8 installed (UEFI mode). I bought a SSD and wanted to do a clean install of Windows, so I thought that disabling the HDD and leaving the SSD as the only drive when installing was the right procedure to install the boot manager on the SSD. Unfortunately, after I plugged the HDD back in, the computer won't boot unless I select from the BIOS directly the SSD as the boot device. I guess the problem is that I have two Windows Boot Managers on two separate drives and they conflict. How would I solve this problem (excluding a format of the HDD, because I need to access data on the old Windows partition and, ideally, I would like to be able to boot that partition)?

  Read the article

• Do not get 'Safely remove' option in Tray for USB storage devices.

  - by blitzkriegz

  I had done some tweaks in service settings (Disabled some as I thought it is not needed). Now, I am not getting the option to safely remove mass storage device when I click the icon on the system tray. I tried enabling some of the services, but it didn't help. Moreover I'm not very sure if this anomaly is because of my changes in services. Any idea how to make those 'safely remove' options appear when I click the USB icon on the tray. Right now nothing is happening when I click.

  Read the article

• Gigabit connection between 2 computers

  - by Alecu

  I am trying to set up a connection between 2 pc's. It's a direct cable connection. The problem that I am having is that the connection isn't gigabit. I know both network cards support gigabit. I checked in the device settings and in one pc I can see in the Speed & Duplex the 1Gbps option but on the other pc I can't see that option despite the fact that the network card is gigabit. I have quite some files to copy from one pc onto another and I really need a good connection between them. I can't really remove the hard drive because it would void the warranty. Could this be a driver issue or a cable issue? On both pc's I have windows 8. The network card on the pc that doesn't have the 1 gbps option is an Atheros ar8161 card.

  Read the article

• Keyboard no longer works when entering BIOS

  - by Tommy

  I am trying to boot from USB so I can install a couple different Linux distros. I can enter the BIOS, but as soon as I enter the BIOS the keyboard lights switch off (Num Lock and Caps Lock) and I cannot use the keyboard to do anything in the BIOS or even exit or restart the PC using Ctrl+Alt+Del or do anything at all with the keyboard. But as soon as I boot back into Windows, everything is fine... I've never had this problem before and some Googling hasn't helped. I've tried using a few other keyboards and simply unplugging/replugging the keyboards, but it didn't work. Is there anything I can do in Windows to maybe find out why the keyboard isn't working in the BIOS screen? In the Device Manager, all the drivers are up to date and there are no conflicts.

  Read the article

• merge pieces of file together

  - by veilig

  I have a directory tree of files I need to loop through and reformat the lines. can I do this with sed with some combination of find? for each file, I'll need to adjust the text in the file from ... * @category Foo * @package Bar ... into just this (Remove the @category line, but prepend the value to the package annotation value) ... * @package Foo/Bar ... what is the most efficient way of doing this? its a few hundred files that will be modified.

  Read the article

• Ubuntu USB flash boot drive gets spontaneous "Unhandled sense code" error and causes drive to switch to Write protected

  - by Steve

  What happens is that the system runs fine for several days or even a week and then suddenly the root file-system / goes read-only. Looking at the syslog it shows that there was an 'Unhandled sense code'. This is under Ubuntu 10.04 but I saw the same thing with Ubuntu 9 with different flash media. /dev/sdg1 on / type ext4 (rw,errors=remount-ro) Jun 26 08:50:04 host1 kernel: [926247.565090] sd 5:0:0:0: [sda] Unhandled sense code Jun 26 08:50:04 host1 kernel: [926247.565094] sd 5:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 26 08:50:04 host1 kernel: [926247.565098] sd 5:0:0:0: [sda] Sense Key : Data Protect [current] Jun 26 08:50:04 host1 kernel: [926247.565103] sd 5:0:0:0: [sda] Add. Sense: Write protected Jun 26 08:50:04 host1 kernel: [926247.565108] sd 5:0:0:0: [sda] CDB: Write(10): 2a 00 00 46 29 18 00 00 08 00 Jun 26 08:50:04 host1 kernel: [926247.565117] end_request: I/O error, dev sda, sector 4598040 Jun 26 08:50:04 host1 kernel: [926247.569788] Buffer I/O error on device sda1, logical block 574499 Jun 26 08:50:04 host1 kernel: [926247.574677] lost page write due to I/O error on sda1

  Read the article

• Unable to read DVD on laptop

  - by usabilitest

  I have a DVD disk that I created on an HP laptop. I believe it was setup to be accessed as a USB device. I do not have that laptop any longer and I still would like to access the files on that DVD from my current DELL laptop but it can not open the disk. My guess, the session nwas not closed on the disk and for some reason the new laptop can not read it. My question is, is there any way I can access the files using new laptop, of do I need to find similar HP to try to access the files and possibly close the session? Are there any utilities out there that could help me? Thanks.

  Read the article

• PING through batch file (looping problem)

  - by pradeetp

  I created a .BAT file in Windows 7 that has the following lines: PING XXX.XXX.XXX.XXX -t (XXX replaces the actual IP number). However, when I double click on this batch file, I can see the PING command repeatedly being executed in a loop. I even tried to rename the .BAT to .CMD but the result is the same. I want to avoid writing PING command through the Command Prompt, which is why I created the batch file. I don't know why the PING command is being continuously called when the same statement is put in a batch file.

  Read the article

• My stereo headphones cable is broken, what can I do?

  - by ucas

  I have a pair of stereo headphones, I got them on Amazon. Now, the right headphone stops producing sound. To fix that I need to move/shake the tip of the cable (the one before that part of tip which goes inside the headphone jack on the laptop). But as time goes, this sort of fix helps less and less. It looks that the cable is a bit broken at the place where I shake/move cable. Is that the end of use of my headphones? Is that a reject of the device? Is there a way to fix it, for example, changing the very tip of the cable at the very end of it. Any advice on buying headphones?

  Read the article

• make a computer recognized as a usb flash drive?

  - by user137560

  Is there anyway to make a folder or a partition on a computer (Linux/windows) to act like a flash drive to other computers or devices when connected with a usb cable. For example, I have a windows 7 computer with 2 partitions c and d, then connect that computer to another computer or a smart TV using a USB cable (has to be male to male USB cable) then the other computer or TV recognizes the current computer as a usb device. Is that possible, if not is there any usb switch to connect an external hard drive or flash drive to both the computer and TV without the need to manually switch them (I know about some USB switches but they only support automatic switching with some certain types of printers, not with mass storage) Thanks in advanced! Sam

  Read the article

• Can one use Airport (Time Capsule) with an external DHCP server?

  - by DNS

  I currently share my DSL connection using a wireless router with DHCP disabled, and dnsmasq running on a Mac Mini serving DHCP & DNS. This setup is important because I have clients doing PXE boot, and I need the control over DHCP that dnsmasq provides. There is also a Time Capsule on the network that's used purely as a backup device; its wireless functions are disabled. The wireless router is starting to get a little flaky, and since it doesn't support 802.11n I'd like to replace it. Rather than buying a new router, I'd like to just use the Time Capsule. But I see no way to disable its DHCP server; when I set the connection type to PPPoE, it insists on serving DHCP. Is there any way to use Airport PPPoE with a DHCP server elsewhere on the network?

  Read the article

• Hosting website when port 80 is taken?

  - by cinqoTimo

  A few months ago, we purchased an R-HUB unit to replace WebEx for remote support. The device operates through port 80, ehich doesn't appear to be configurable. I know in IIS, you can specify a port besides port 80, but the problem is in the port forwarding. On our router, we have to map an incoming port to the forward port which then directs traffic to the node (webserver). However, the incoming port for both the webserver and the R-HUB is 80 - and the server seems to be getting confused as I can only get to the R-HUB, not the website. How can I expose both devices? Host header headers? DNS config?

  Read the article

• I don't have a free PCI / PCI-e slot, can it be worked around?

  - by Borek

  I need to add a PCI(e) card to a nettop PC that is so small that the card won't fit there (and there is no external alternative like we're used to with external TV tuners). The only ports available are USB and eSATA, is it possible to somehow "dock" the PCI card into some device that would then connect to the PC via USB or eSATA? Or am I out of luck? (I don't mind the solution being visually ugly, I wouldn't even mind opening up the case and soldering some wires in, anything that would work would be great.)

  Read the article

• mod_rewrite to redirect to specific WP page

  - by djdy

  The goal is to redirect all requests coming to Wordpress from IE 6 and 7, to a specific Wordpress page using mod_rewrite. My confusion comes from multiple conditions that are needed for the rewrite not entering an endless loop once on the specific Wordpress page. So the condition must be: (IE 6 or 7) and request is not the same as the page we are sending them to. I've tried things along the lines of: RewriteCond %{HTTP_USER_AGENT} MSIE\ ([67])\. RewriteCond %{REQUEST_URI} !iepage RewriteRule .* /iepage/ [R] In IE 6 and 7, I get page cannot be displayed errors. Could it really mean too many redirects, because the 2nd condition isn't working?

  Read the article

• Can I create an Infrastructure access point from built-in WiFi (as opposed to Ad-Hoc) on Windows XP?

  - by evilspoons

  I want to use my Windows XP laptop as an access point. What I am trying to achieve is possible under Windows 7 with a myriad of utilities, but the wireless driver stack was different before Windows 7 and those specific APIs don't exist on XP. The reason behind me wanting to do this is that I would like my Android phone to be able to connect via WiFi to a network that is only hard-wired (reverse tethering). Unfortunately, my Android device (Galaxy S Captivate) does not support ad-hoc networks without a serious amount of screwing around. Is it possible to create an "Infrastructure" network with my Dell Latitude D830's built-in WiFi - a "Dell Wireless 1395 WLAN Card", which I am assuming is probably rebadged Broadcom, or is there some fundamental difference between a wireless adapter and an access point that would prevent this?

  Read the article

• Ping or accessing WAN IP from LAN results in failure on only one box

  - by ComputerUserGuy

  Morning/evening gents. I purchased a radical domain name today to set up a name for my services and to set up SSL. I configured the SSL fine and all but when I went to my website I couldn't connect. I can connect to the site with any other device in my house and my friend can connect to it as well from outside of the LAN. I am hosting the services with my computer and I can't access the service. Whenever I ping it using the command prompt I get a result of "General Failure.". It saddens me that they couldn't make a better message as it kind of brings me down. I'm not sure what's the deal here as I have all of my firewalls down and my ports are forwarded. Running Windows 7. Thanks for the assistance chaps.

  Read the article

• How to get audio driver for compaq c700 ?

  - by Leena

  Hi, Initially i have audio driver and its works fine.But some times speaker was clear.So one of my friend installed some audio driver,after that totally disabled the volume. For that reason, i also tried to get audio driver and installed many times.Now i don't know many drivers .inf in my laptop.from device manager i have deleted the audio driver's,below i have attached the screen shot yours kind reference. Please help me to get audio drivers.First, i need to remove the unwanted drivers .inf files from laptop then i have to install the new audio driver. Experts,please suggest me to get audio driver without reinstall the OS. Details: Compaq c700 (i don't know model number) windows xp sp2 p/n : KT188PA#ACJ I appreciate your help.

  Read the article

< Previous Page | 445 446 447 448 449 450 451 452 453 454 455 456  | Next Page >