Search Results

Search found 16824 results on 673 pages for 'model binding'.

Page 449/673 | < Previous Page | 445 446 447 448 449 450 451 452 453 454 455 456  | Next Page >

• external HDD with SATA & USB interface? [closed]

  - by GregH

  Anyone know of an external HDD that would have (in addition to USB) a SATA (eSATA) port/cable? i.e. Brand/Model Background - In one location I want to use it is I would like to increase the performance by cabling it directly to the PC SATA port, HOWEVER I don't want to have to open up the PC to do this each time. I was thinking of running a SATA cable out through the PC case so I just plug it directly into the external HDD in question. Perhaps it should be also externally powered too so I don't need to run a power cable out from the PC power supply.

  Read the article

• Ubuntu Remix on Acer Aspire One Netbook keeps freezing

  - by user7553

  It came with a Windows XP installation and I just couldn't deal with the screen constantly blacking out. Later on I found out they designed a specific key on this netbook for it. Anyways I installed Ubuntu Remix and it fixed it. However a lot of bad things are happening now. 1) If I want a long video or lots of music it will lockup after an hour. 2) Plugging it to an external monitor for more then 1 hour will black out. 3) Constantly running fsck after a lockup and then I lose nodes / fragments and what not :( I am really not sure what to do, both blacking out and lockups really mess my hard drive up. I have to manually run fsck every time it happens. My gf has the same kind of netboot w/ Remix (not the same model number) and it runs perfectly fine on hers. Except for skype eating up all her CPU.

  Read the article

• Using Zebra LP 2844-Z over the network

  - by Jason Kealey

  Hello, I am looking for a network-based label printer. I am looking at this Zebra LP-2844-Z printer. Unfortunately, it does not come with a network interface like the lower-end LP 2824 Plus. The ZebraNet 10/100 Print Server is both expensive for what it does (~$600) and only seems to support wireless networking, not wired. I prefer wired for reliability. Questions: Can I use a cheaper off-the-shelf print server to turn the LP-2844Z to a network printer. Would I get any trouble communicating with the printer via its own programming language or via OPOS? (instead of the Windows driver) Are cheaper print servers reliable? Would I be better to get another printer model that has it built in directly to avoid having issues due to the print server? What other printer would you recommend?

  Read the article

• Proper network configuration for a KVM guest to be on the same networks at the host

  - by Steve Madsen

  I am running a Debian Linux server on Lenny. Within it, I am running another Lenny instance using KVM. Both servers are externally available, with public IPs, as well as a second interface with private IPs for the LAN. Everything works fine, except the VM sees all network traffic as originating from the host server. I suspect this might have something to do with the iptables-based firewall I'm running on the host. What I'd like to figure out is: how to I properly configure the host's networking such that all of these requirements are met? Both host and VMs have 2 network interfaces (public and private). Both host and VMs can be independently firewalled. Ideally, VM traffic does not have to traverse the host firewall. VMs see real remote IP addresses, not the host's. Currently, the host's network interfaces are configured as bridges. eth0 and eth1 do not have IP addresses assigned to them, but br0 and br1 do. /etc/network/interfaces on the host: # The primary network interface auto br1 iface br1 inet static address 24.123.138.34 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 gateway 24.123.138.33 bridge_ports eth1 bridge_stp off auto br1:0 iface br1:0 inet static address 24.123.138.36 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 # Internal network auto br0 iface br0 inet static address 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 bridge_ports eth0 bridge_stp off This is the libvirt/qemu configuration file for the VM: <domain type='kvm'> <name>apps</name> <uuid>636b6620-0949-bc88-3197-37153b88772e</uuid> <memory>393216</memory> <currentMemory>393216</currentMemory> <vcpu>1</vcpu> <os> <type arch='i686' machine='pc'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='cdrom'> <target dev='hdc' bus='ide'/> <readonly/> </disk> <disk type='file' device='disk'> <source file='/raid/kvm-images/apps.qcow2'/> <target dev='vda' bus='virtio'/> </disk> <interface type='bridge'> <mac address='54:52:00:27:5e:02'/> <source bridge='br0'/> <model type='virtio'/> </interface> <interface type='bridge'> <mac address='54:52:00:40:cc:7f'/> <source bridge='br1'/> <model type='virtio'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> </devices> </domain> Along with the rest of my firewall rules, the firewalling script includes this command to pass packets destined for a KVM guest: # Allow bridged packets to pass (for KVM guests). iptables -A FORWARD -m physdev --physdev-is-bridged -j ACCEPT (Not applicable to this question, but a side-effect of my bridging configuration appears to be that I can't ever shut down cleanly. The kernel eventually tells me "unregister_netdevice: waiting for br1 to become free" and I have to hard reset the system. Maybe a sign I've done something dumb?)

  Read the article

• Sustaining Dual Channel among many RAM modules

  - by Odys

  I'd like to know what are the factors that need to be set in order to sustain the Dual Channel mode. In a mobo with 4 DDR3 slots: Do I have to put pair of chips? Eg: If I put 3 identical chips only, will I have Dual channel or not? If I put 4 Ram chips that aren't from of same ventor/model, will I have the same latency among them (the highest of all)? Also, will I sustain Dual Channel mode? If one Ram has max frequency of 1033 and the other 3 chips are of 1300, will I have 1033Mhz for all chips and Dual Channel mode on? What if I put 2x4Gb and 2x8Gb chips (latency, Dual Channel)? Can I put 4Gb chips in slots 1 and 3 and 8Gb in slots 2 and 4 and still have dual channel mode enabled? (Some of the questions might sound silly but their answers aren't that clear to me) (Also, assume that there aren't any bottlenecks because of other parts on the system)

  Read the article

• Lock down SFTP access on OpenSolaris

  - by Simon

  Hi all, I have an OpenSolaris 2009.06 server and I'd like to enable a user to remotely change files in a specific directory, ideally via SFTP or FTP-via-SSH. This user does not yet have an account on the machine and I'd like to create it so it's as restricted as possible. Is there a canonical way of doing this? I know about OpenSolaris' role-based access control and authorizations model, but I figure it's a lot of work (i.e., a lot I can mess up) to really lock down a full-blown user account (prevent fork bombs, make sure there's really no other file in the file system which can be written to...). Any hint is greatly appreciated. Thanks, Simon

  Read the article

• Where is the actual content in a TCP segment

  - by packetloss

  When I email something or download a program, or do anything else over a network, where in the segment is the actual content? If I am emailing a 20KB word document, and the maximum data field size in a segment is 1500 bytes, does that mean it takes about 14 segments to mail my document wherever it is going? I get, I think, the OSI model and I have a decent grasp of the IP protocol. I think I understand the concept of header wrapping of each successive layer in the protocol stack. What I can't get a definitive answer to is where does the actual content go in a TCP segment? Is that the datagram? Maybe the fact I am asking proves I have no clue... Many thanks.

  Read the article

• BackupExec Hyper-V availability (within BackupExec 2010 or seperate?)

  - by blade

  Hi, I have downloaded the trial of Symantec BackupExec 2010 but I am a little confused: The agent for Hyper-V is available and for sale ($1800 or something), but the trial of BackupExec tells me i can install the agents I need from the installer. Can I install a full version of BackupExec, providing I have the license, but also install a full version of the Hyper-V agent? Or do I have to download/buy this seperately? Is a trial version available for the agents? As is probably obvious from this thread, I am a bit confused about the business model of this product. Please clarify. Thanks

  Read the article

• finding the user of iis apppool \ defaultapppool

  - by LosManos

  My IIS apppool user is trying to create a folder but fails. How do I find out which User it is? Let's say I don't know much about IIS7 but need to trace whatever is happening through tools. Place of crime is WinSrv2008 with IIS7. So I fire up Sysinternals/ProcessMonitor to find out what is happening. I find Access denied on a folder just as I suspected. But which user? I add the User column to the output and it says IIS Apppool\Defaultapppool in capitals. Well... that isn't a user is it? If I go to IIS and its Apppools and Advanced settings and Process model and Identity I can see clues about which user it is but that is only because I know IIS. What if it had been Apache or LightHttpd or whatever? How do I see the user to give the appropriate rights to?

  Read the article

• How to increase video memory in libvirt/KVM gui?

  - by Dejan

  In the 'Virtual Hardware details', it lists the model as 'cirrus' with 9MB of RAM. The RAM field cannot be changed, but how to increate the video RAM? My host OS is RH6 and gust OS is Fedora16. EDIT: From guest OS, when I run xvinfo it displays 'no adaptors present'. I was trying to play a video using gstreamers xvimagesink plugin (XFree86 video output plugin using Xv extension). The problem is that xvimagesink is using hardware acceleration for video performance and hence the error Could not initialize Xv output. I guess I'll have to configure hardware acceleration for the guest.

  Read the article

• Does HP 8530w support Wifi 802.11n?

  - by FoxyBOA

  According to vendor site HP 8530w supports 802.11n draft mode. My Windows 7 tell me that network card is 5100 ABG and know nothing about N mode (guys from Intel forum mentioned, that 802.11N versions must ended with N letter, e.g. 5100 ABN). Not sure if it matter, but my laptop model id is #FU462EA. How could I check that my Wifi card compliant with 802.11n (I suspect that "draft N" could have two "special" meaning: doesn't work with 802.11n at all or requires special activation of the mode). Any hints are welcome.

  Read the article

• My Windows 8 computer does not come out of Standby

  - by Jikag

  My computer will not come out out of standby. It has had this issue ever since I bought it ~4 years ago. When I purchased it, It came with Vista, I have since upgraded it to 7 and now 8 Pro, each time hoping that it would fix the problem, each time finding that it did not. My computer is an HP Pavilion Model #: m9500y. The computer goes into standby, but does not come out of it properly. If Hybrid sleep in on, it does not respond at all. If Hybrid sleep is off, It comes out and I can see the desktop for a bit, but then the screen goes black again and I have to reboot. I have tried Running a sfc, and a chkdsk in case it's a corrupted file, but it hasn't helped. This isn't too serious an issue because I can just shutdown my computer and turn it on the old fashioned way, but it is annoying and I would appreciate some advice going forward as I'm currently stumped.

  Read the article

• Mecer laptop gives me a white screen when I close the screen

  - by Dane Rossenrode

  I'm having a very strange hardware issue with my Mecer m770u laptop with intel i7 quad core, etc... I'm wondering if anyone has had this issue with any other brand/model of laptop, and what I should fix/replace to solve it...? Basically when I close the screen of the laptop, the screen often goes completely white. If I open it slowly and smoothly again, the screen returns to normal. But if I close the screen when the computer is off, and then switch it on, it boots with a white screen, and opening it slowly/smoothly doesn't help. I have to then switch it on and off a few times before it returns to normal. Makes travelling with my laptop really difficult! Any suggestions?

  Read the article

• GNU/Linux: SAS-disk detected as /dev/sg7 - not as /dev/sdb

  - by Ole Tange

  I have just installed a SAS disk into a Debian server. It was detected correctly and everything was fine. Then I moved the SAS disk to a different Debian server, the same hardware model and running same version of Debian, but here the SAS disk is detected as /dev/sg7 and not /dev/sdb. smartctl -a /dev/sg7 works fine, but fdisk and cat hang. I tried putting the SAS disk in another slot: Same problem. How can I force the SAS disk to be detected as /dev/sdb? # uname -a Linux maxwell 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2+deb7u2 x86_64 GNU/Linux

  Read the article

• SQL Performance Problem IA64

  - by Vendoran

  We’ve got a performance problem in production. QA and DEV environments are 2 instances on the same physical server: Windows 2003 Enterprise SP2, 32 GB RAM, 1 Quad 3.5 GHz Intel Xeon X5270 (4 cores x64), SQL 2005 SP3 (9.0.4262), SAN Drives Prod: Windows 2003 Datacenter SP2, 64 GB RAM, 4 Dual Core 1.6 GHz Intel Family 80000002, Model 6 Itanium (8 cores IA64), SQL 2005 SP3 (9.0.4262), SAN Drives, Veritas Cluster I am seeing excessive Signal Wait Percentages ( 250%) and Page Reads /s (50) and Page Writes /s (25) are both high occasionally. I did test this query on both QA and PROD and it has the same execution plan and even the same stats: SELECT top 40000000 * INTO dbo.tmp_tbl FROM dbo.tbl GO Scan count 1, logical reads 429564, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. As you can see it’s just logical reads, however: QA: 0:48 Prod: 2:18 So It seems like a processor related issue, however I’m not sure where to go next, any ideas? Thanks, Aaron

  Read the article

• Firefox 3.5.6 Uninstaller not working

  - by Wesley

  Hi all, I want to uninstall Firefox 3.5.6 in favor of Opera 10.10. However, I've went into Control Panel Add or Remove Programs and tried clicking Remove from there, but nothing happens. I go into the Program Files for FIrefox and find the Uninstaller folder and click the helper.exe found in there. Still, nothing happens. Is there some possible way to uninstall Firefox without screwing up the rest of my computer? Computer is a EMACHINES T2482: http://emachines.com/support/product_support.html?cat=Desktops&subcat=T%20Series&model=T2482 RAM has been upgraded to 1 GB PC3200 DDR, GPU has been upgraded to 128MB GeForce 6200, HDD has been upgraded to 160 GB, PSU has been upgraded to 350W and Floppy and DVD Reader have been disconnected from mobo and power. OS is XP Pro SP3

  Read the article

• Reverse Engineer a .pyo python file

  - by Brian

  I have 2 .pyo python files that I can convert to .py source files, but they don't compile perfectly as hinted by decompyle's verify. Therefore looking at the source code, I can tell that config.pyo simply had variables in in an array: ADMIN_USERIDS = [116901, 141, 349244, 39, 1159488] I would like to take the original .pyo and disassembly or whatever I need to do inorder to change one of these IDs. Or.... in model.pyo the source indicates a if (productsDeveloperId != self.getUserId()): All I would want to do is hex edit the != to be a == .....Simple with a windows exe program but I can't find a good python disassembler anywhere. Any suggestions are welcomed...I am new to reading bytecode and new to python as well.

  Read the article

• How much processor speed and cores do I need for these tasks?

  - by ajay

  I am planning to buy a new laptop as I find my current one very slow. My question here is specifically related to RAM size and CPU power. I will mostly be doing development (not much games). I would be dabbling in distributed computing, multithreaded and data intensive parallelizable tasks on multi-cores. For e.g. I would want to be able to Concurrent programming in Scala/Java/Clojure etc. and be able to see parallelization. Furthermore, I would want the RAM to be enough. But from a developer machine standpoint, do you think 4GB RAM and 2.53GHz Dual Core processor would be enough. I'm basically looking at this model: http://store.apple.com/us/configure/MC118LL/A?mco=MTM3NDcyODk (link dead)

  Read the article

• Looking for QNX compatible server hardware

  - by Sergey Sobolev

  Can you help me to find compatible modern server for QNX, please? This is quite rare OS, so most of the hardware vendors do not have compatibility information. It would be very helpful to me if you can do the following: Download iso http://www.qnx.com/download/download/19602/qnxsdp-6.4.1-x86-200905201802-nto.iso burn to cd Start from cd press F2 - try from CD start Utilities/Terminal run sloginfo /tmp/sloginfo.log; get_hw_info; pci -vvv /tmp/pci-vvv.log send logs from /tmp/ to [email protected] with system model/build I will summarize results afterwards and post them here. I'm especially interested in Fujitsu RX100 S5 as it looks like one of the most compatible servers with frontally accessible HDDs.

  Read the article

• Digital Blue Digital Movie Creator 3.0 driver

  - by user27977

  I'm having a complete 'mare of a time trying to use my schools Digital Blue cameras. We've got the model 3 ones, but can't find the driver disc and using the Windows Hardware Installation Wizard gets me no where! Can you help me to find the driver? When I've used it at my old school it had a piece of software called the Digital Movie Creator, which I've heard you can use to make stop-motion films, which is what I want to do! This is what it looks like http://www.amazon.co.uk/Digital-Movie-Creator-1GB-Card/dp/B000LP30LA/ref=sr_1_2?ie=UTF8&s=software&qid=1265928833&sr=1-2

  Read the article

• Can a Shadow Copy of SQL 2000 databases files be used as a restore?

  - by Keith Sirmons

  Howdy, I have a SQL 2000 instance (version 8.00.760) that is on a drive that gets regular shadow copies. Can a shadow copy be used to restore the database? It seems possible to stop the SQL service, restore the Data folder from the shadow copy (includes msdb, master, model, temp, and the user databases, then restart the service. Would the files be in a crash consistent case in the worst case? If so, when restarting the service wouldn't it recover as if the power were pulled from the server? Thank you, Keith

  Read the article

• Modeling RBAC actors using LDAP (Core X.5xx)

  - by Tetsujin no Oni

  Mirrored from stackoverflow... When implementing an RBAC model using an LDAP store (I'm using Apache Directory 1.0.2 as a testbed), some of the actors are obviously mappable to specific objectClasses: Resources - I don't see a clear mapping for this one. applictionEntity seems only tangentially intended for this purpose Permissions - a Permission can be viewed as a single-purpose Role; obviously I'm not thinking of an LDAP permission, as they govern access to LDAP objects and attributes rather than an RBAC permission to a Resource Roles - maps fairly directly to groupOfNames or groupOfUniqueNames, right? Users - person In the past I've seen models where a Resource isn't dealt with in the directory in any fashion, and Permissions and Roles were mapped to Active Directory Groups. Is there a better way to represent these actors? How about a document discussing good mappings and intents of the schema?

  Read the article

• Website with large number of users keeps going down due to memory leaks:Tomcat6 and Java 6

  - by user1766478

  We host many websites on one of our two virtual servers. We use tomcat 6 and Java 6. It is an MVC model with a hibernate like layer. The problem is, one of our biggest clients with the most number of members, keeps crashing the server every 6-8 hours(precisely in the mornings when most members login) We have been having this issue for 4 days now. Trying to figure out the problem but we suspect memory leaks. Any suggestions?

  Read the article

• Does vmWare ESXi 4.0 U1 support the Promise SuperTrak EX8650 SATA card?

  - by RTNN

  Hi, can anyone tell me if vmWare ESXi 4.0 U1 has support for the Promise SuperTrak EX8650 SATA card? In the hardware support guide I find that VmWare should have support for the Promise SuperTrak EX8650 SATA card but only in version ESX 3.5. Is this card not supported for ESXi 4.0 U1 or what? From the hardware guide! Partner Name Model Manufacturer Device Type Supported Releases Promise SuperTrak EX8650 Promise Technology Inc SAS-RAID ESX 3.5 U5*1 1 , ESX 3.5 U4*1 1 Promise SuperTrak EX8760T Promise Technology Inc SAS ESX / ESXi 4.0 U1*2 2 , ESX / ESXi 4.0*2 2

  Read the article

• How to setup a simple self-hosted dynamic DNS server

  - by Cerin

  I have a small internal network of physical machines running hypervisors, which in turn run several KVM Ubuntu virtual machines. How would I setup an internal dynamic DNS server so that when I run a script to create a new virtual machine, that VM could automatically register itself in the DNS server? Bind seems to be the standard DNS server for Linux, but it seems designed for a much more "static" DNS model. Dynamically updating this would require a complicated script that would have to SSH into the DNS server, edit configuration files, and then restart the server. This doesn't seem like a very elegant solution. Are there better options? I saw a similar question, although they're asking for a solution for a public setting on Amazon. My servers are entirely private, and I don't want to rely on an external VM host or Dynamic DNS provider.

  Read the article

< Previous Page | 445 446 447 448 449 450 451 452 453 454 455 456  | Next Page >