chosen - Page 45 - Developer IT

Need a fast programming language that can drive two printers

- by Pete

I have a rather unusual application that isn't working the way I need, and I hope someone here will have some suggestions or at least a direction to investigate. We have a museum exhibit that has a computer at the entrance driving two small receipt printers. There are two buttons on a console, wired to the left and right buttons of a disemboweled mouse. The two printers and associated buttons are for girls and boys, each button does a random selection from a database of names and prints a small ticket on the appropriate printer with a graphic image, a few words about the exhibit and the randomly chosen name. Conceptually all is well, but it hangs quite often. I got the project at the last minute, because the original designer got bogged down and couldn't deliver, so the exhibit's author asked me the day before opening, whether I could write something that would work. I did it in Word, since I am an experienced VBA programmer. Several other avenues I attempted first all lead to dead ends - one couldn't do graphics, another couldn't handle two printers, yet another couldn't change fonts and so on. The problem is that it simply isn't fast enough - Word can only drive one printer at a time and changing the active printer takes a long time. Not by office standards, where a second or two of delay before a printer starts working on your document is not an issue, but here I need more or less instant response. If kids press a button and nothing happens, they press it over and over until something does happen, resulting in maybe half a dozen commands being sent before the printer starts reacting. Sometimes it jams the program completely, since boys and girls will be pressing the two buttons simultaneously and Word locks up, and even when it doesn't jam, the printers then spit out a stream of tickets, making a mess. The kids start squabbling over which ticket is whose, pulling them out of the printers, snarling the paper tape, jamming the printer and generally making a mess of the whole affair, often necessitating the exhibit caretakers having to restart the computer and clear torn bits of paper out the printers. What I need is some sort of fast programming language that can drive two printers *-simultaneously-*, not the MSOffice claptrap of having to switch the active printer, that can react to both left and right mouse button click events, can print a small graphic image and can print in different font sizes and styles and. I don't need many, but it's not all in one typeface. Can anyone suggest what I might use for this? I don't even know if it's possible at all under Windows, whether the "single active printer" garbage is an Office artifact, or a Windows restriction. My little Commodore-64 twenty-five years ago had two printers attached to it and drove both simultaneously with no difficulties - it doesn't seem to me it should be such an impossible requirement today.

Read the article

jQuery Form plugin - no data from file upload?

- by pojo

I've been struggling a bit with the jQuery Form plugin. I want to create a file upload form that posts the data (JSON, from the chosen file) into a REST service exposed by a servlet. The URL for the POST is calculated from what the user chooses in a SELECT dropdown. When the upload is complete, I want to notify the user immediately, AJAX-style. The problem is that the POST header has a Content-Length of 0 and contains no data. I would appreciate any help! <html> <head> <script type="text/javascript" src="js/jquery-1.4.2.min.js">/* ppp */</script> <script type="text/javascript" src="js/jquery.form.js">/* ppp */</script> <script type="text/javascript"> function cb_beforesubmit (arr, $form, options) { // This should override the form's action attribute options.url = "/rest/services/" + $('#selectedaction')[0].value; return true; } function cb_success (rt, st, xhr, wf) { $('#response').html(rt + '<br>' + st + '<br>' + xhr); } $(document).ready(function () { var options = { beforeSubmit: cb_beforesubmit, success: cb_success, dataType: 'json', contentType: 'application/json', method: 'POST', }; $('#myform').ajaxForm(options); $.getJSON('/rest/services', function (data, ts) { for (var property in data) { if (typeof property == 'string') { $('#selectedaction').append('<option>' + property + '</option>'); } } }); }); </script> </head> <body> <form id="myform" action="/rest/services/foo1" method="POST" enctype="multipart/form-data">  <select id="selectedaction"> <script type="text/javascript"> </script> </select> <input type="file" value="Choose"/> <input type="submit" value="Submit" /> </form> <div id="response"> </div> </body> </html>

Read the article

assistance required, hangman game.

- by Phillip Gibson

I am making a hangman game and am having trouble with part of it. I have selected a random word from a file, but I want to display the word as a series of undersocres __ and then match the letter chosen to a position in the undersocres. Can anyone help me? cout <<"1. Select to play the game\n"; cout <<"2. Ask for help\n"; cout <<"3. Select to quit the game\n"; cout << "Enter a selection: "; int number; cin >> number; while(number < 1 || number > 3 || cin.fail()) { if(cin.fail()) { cin.sync(); cin.clear(); cout << "You have not entered a number, please enter a menu selection between 1 and 3\n"; cin >> number; } else { cout << "Your selection must be between 1 and 3!\n"; cin >> number; } } switch (number) { case 1: { string word; string name; cout << " Whats your name? "; cin >> name; Player player(); ifstream FileReader; FileReader.open("words.txt"); if(!FileReader.is_open()) cout << "Error"; //this is for the random selection of words srand(time(0)); int randnum = rand()%10+1; for(int counter = 0; counter < randnum; counter++) { getline(FileReader, word, '\n'); } cout << "my word: " << word << "\n"; // get length of word int length; //create for loop for(int i = 0; i < length; i++) cout << "_"; //_ _ _ _ _ SetCursorPos(2,10); FileReader.close(); break;

Read the article

Is a many-to-many relationship with extra fields the right tool for my job?

- by whichhand

Previously had a go at asking a more specific version of this question, but had trouble articulating what my question was. On reflection that made me doubt if my chosen solution was correct for the problem, so this time I will explain the problem and ask if a) I am on the right track and b) if there is a way around my current brick wall. I am currently building a web interface to enable an existing database to be interrogated by (a small number of) users. Sticking with the analogy from the docs, I have models that look something like this: class Musician(models.Model): first_name = models.CharField(max_length=50) last_name = models.CharField(max_length=50) dob = models.DateField() class Album(models.Model): artist = models.ForeignKey(Musician) name = models.CharField(max_length=100) class Instrument(models.Model): artist = models.ForeignKey(Musician) name = models.CharField(max_length=100) Where I have one central table (Musician) and several tables of associated data that are related by either ForeignKey or OneToOneFields. Users interact with the database by creating filtering criteria to select a subset of Musicians based on data the data on the main or related tables. Likewise, the users can then select what piece of data is used to rank results that are presented to them. The results are then viewed initially as a 2 dimensional table with a single row per Musician with selected data fields (or aggregates) in each column. To give you some idea of scale, the database has ~5,000 Musicians with around 20 fields of related data. Up to here is fine and I have a working implementation. However, it is important that I have the ability for a given user to upload there own annotation data sets (more than one) and then filter and order on these in the same way they can with the existing data. The way I had tried to do this was to add the models: class UserDataSets(models.Model): user = models.ForeignKey(User) name = models.CharField(max_length=100) description = models.CharField(max_length=64) results = models.ManyToManyField(Musician, through='UserData') class UserData(models.Model): artist = models.ForeignKey(Musician) dataset = models.ForeignKey(UserDataSets) score = models.IntegerField() class Meta: unique_together = (("artist", "dataset"),) I have a simple upload mechanism enabling users to upload a data set file that consists of 1 to 1 relationship between a Musician and their "score". Within a given user dataset each artist will be unique, but different datasets are independent from each other and will often contain entries for the same musician. This worked fine for displaying the data, starting from a given artist I can do something like this: artist = Musician.objects.get(pk=1) dataset = UserDataSets.objects.get(pk=5) print artist.userdata_set.get(dataset=dataset.pk) However, this approach fell over when I came to implement the filtering and ordering of query set of musicians based on the data contained in a single user data set. For example, I could easily order the query set based on all of the data in the UserData table like this: artists = Musician.objects.all().order_by(userdata__score) But that does not help me order by the results of a given single user dataset. Likewise I need to be able to filter the query set based on the "scores" from different user data sets (eg find all musicians with a score 5 in dataset1 and < 2 in dataset2). Is there a way of doing this, or am I going about the whole thing wrong?

Read the article

ajaxSubmit and Other Code. Can someone help me determine what this code is doing?

- by Matt Dawdy

I've inherited some code that I need to debug. It isn't working at present. My task is to get it to work. No other requirements have been given to me. No, this isn't homework, this is a maintenance nightmare job. ASP.Net (framework 3.5), C#, jQury 1.4.2. This project makes heavy use of jQuery and AJAX. There is a drop down on a page that, when an item is chosen, is supposed to add that item (it's a user) to an object in the database. To accomplish this, the previous programmer first, on page load, dynamically loads the entire page through AJAX. To do this, he's got 5 div's, and each one is loaded from a jquery call to a different full page in the website. Somehow, the HTML and BODY and all the other stuff is stripped out and the contents of the div are loaded with the content of the aspx page. Which seems incredibly wrong to me since it relies on the browser to magically strip out html, head, body, form tags and merge with the existing html head body form tags. Also, as the "content" page is returned as a string, the previous programmer has this code running on it before it is appended to the div: function CleanupResponseText(responseText, uniqueName) { responseText = responseText.replace("theForm.submit();", "SubmitSubForm(theForm, $(theForm).parent());"); responseText = responseText.replace(new RegExp("theForm", "g"), uniqueName); responseText = responseText.replace(new RegExp("doPostBack", "g"), "doPostBack" + uniqueName); return responseText; } When the dropdown itself fires it's onchange event, here is the code that gets fired: function SubmitSubForm(form, container) { //ShowLoading(container); $(form).ajaxSubmit( { url: $(form).attr("action"), success: function(responseText) { $(container).html(CleanupResponseText(responseText, form.id)); $("form", container).css("margin-top", "0").css("padding-top", "0"); //HideLoading(container); } } ); } This blows up in IE, with the message that "Microsoft JScript runtime error: Object doesn't support this property or method" -- which, I think, has to be that $(form).ajaxSubmit method doesn't exist. What is this code really trying to do? I am so turned around right now that I think my only option is to scrap everything and start over. But I'd rather not do that unless necessary. Is this code good? Is it working against .Net, and is that why we are having issues?

Read the article

How to combine a list of choices to determine which select statement

- by Larry

I have a mysql db and am using php 5.2 What I am trying to do is offer a list of options for a person to select (only 1). The chosen option will cause a select, update, or delete statement to be ran. The results of the statement do not need to be shown, although, showing the old and then the new would be nice (no problems with that part tho'.). Pseudo-Code: Assign $choice = 0 Check the value of $choice // This way, if it = 100, we do a break Select a Choice:<br> 1. Adjust Status Value (+60) // $choice = 1<br> 2. Show all Ships <br> // $choice = 2 3. Show Ships in Port <br> // $choice = 3 ... 0. $choice="100" // if the value =100, quit this part Use either case (switch) or if/else statements to run the users choice1 If the choice is 1, then run the "Select" statement with the variable of $sql1 -- "SELECT .... If the choice is 2, then run the "Select" statement with the variable of $sql2 --- SELECT * FROM Ships If the choice is 3, then run the "Select" statement with the variable of $sql3 <br> .... If the choice is 0, then we are done. I figured the (3) statements would be assigned in php as: $sql1="...". $sql2="SELECT * FROM Ships" $sql3="SELECT * FROM Ships WHERE nPort="1" My idea was to use the switch statement, but got lost on it. :( I would like the options to be available over and over again, until a variable ($choice) is selected. In which case, this particular page is done and goes back to the "Main Menu"? The coding and display, if I use it, I can do. Just not sure how to write the way to select which one I want. It is possible that I would run all of the queries, and other times, only one, so that is why I would like the choice. An area I get confused in is the proper forms to use such as -- ' ' " " and ...?? Not sure the # of options I will end up with, but it will be more than 5 but less than 20 / page. So if I get the system down for 2-3 choices, I can replicate it for as many as I may need. And, as always, if a better way exists, I am willing to try it. Thanks again... Larry

Read the article

Why does this work in Firefox but not IE and how can I fix it?

- by bstullkid

I want to show and hide rows of a table based on the value of a select box and this works in Firefox but not IE: <select onChange="javascript: toggle(this.value);"> <option value="cat0">category 0</option> <option value="cat1">category 1</option> </select> <table> <tr name="cat0"> <td>some stuff v</td> <td>some stuff v</td> </tr> <tr name="cat0"> <td>some stuff d</td> <td>some stuff d</td> </tr> <tr name="cat1"> <td>some stuff a</td> <td>some stuff a</td> </tr> <tr name="cat1"> <td>some stuff b</td> <td>some stuff b</td> </tr> </table> <script type="text/javascript"> function toggle(category) { // turn everything off for (var i = 0; i < 2; i++) { var cat = document.getElementsByName('cat' + i); for (var j = 0; j < cat.length; j++) cat[j].style.display = 'none'; } // turn on category chosen var cat = document.getElementsByName(category); for (var i = 0; i < cat.length; i++) cat[i].style.display = ''; } // start by showing cat0 toggle('cat0'); </script>

Read the article

Code Golf: Countdown Number Game

- by Noldorin

Challenge Here is the task, inspired by the well-known British TV game show Countdown. The challenge should be pretty clear even without any knowledge of the game, but feel free to ask for clarifications. And if you fancy seeing a clip of this game in action, check out this YouTube clip. It features the wonderful late Richard Whitely in 1997. You are given 6 numbers, chosen at random from the set {1, 2, 3, 4, 5, 6, 8, 9, 10, 25, 50, 75, 100}, and a random target number between 100 and 999. The aim is to make use the six given numbers and the four common arithmetic operations (addition, subtraction, multiplication, division; all over the rational numbers) to generate the target - or as close as possible either side. Each number may only be used once at most, while each arithmetic operator may be used any number of times (including zero.) Note that it does not matter how many numbers are used. Write a function that takes the target number and set of 6 numbers (can be represented as list/collection/array/sequence) and returns the solution in any standard numerical notation (e.g. infix, prefix, postfix). The function must always return the closest-possible result to the target, and must run in at most 1 minute on a standard PC. Note that in the case where more than one solution exists, any single solution is sufficient. Examples: {50, 100, 4, 2, 2, 4}, target 203 e.g. 100 * 2 + 2 + (4 / 4) e.g. (100 + 50) * 4 * 2 / (4 + 2) {25, 4, 9, 2, 3, 10}, target 465 e.g. (25 + 10 - 4) * (9 * 2 - 3) {9, 8, 10, 5, 9, 7), target 241 e.g. ((10 + 9) * 9 * 7) + 8) / 5 Rules Other than mentioned in the problem statement, there are no further restrictions. You may write the function in any standard language (standard I/O is not necessary). The aim as always is to solve the task with the smallest number of characters of code. Saying that, I may not simply accept the answer with the shortest code. I'll also be looking at elegance of the code and time complexity of the algorithm! My Solution I'm attempting an F# solution when I find the free time - will post it here when I have something! Format Please post all answers in the following format for the purpose of easy comparison: Language Number of characters: ??? Fully obfuscated function: (code here) Clear (ideally commented) function: (code here) Any notes on the algorithm/clever shortcuts it takes.

Read the article

C - What is the proper format to allow a function to show an error was encountered?

- by BrainSteel

I have a question about what a function should do if the arguments to said function don't line up quite right, through no fault of the function call. Since that sentence doesn't make much sense, I'll offer my current issue. To keep it simple, here is the most relevant and basic function I have. float getYValueAt(float x, PHYS_Line line, unsigned short* error) *error = 0; if(x < line.start.x || x > line.end.x){ *error = 1; return -1; } if(line.slope.value != 0){ //line's equation: y - line.start.y = line.slope.value(x - line.start.x) return line.slope.value * (x - line.start.x) + line.start.y; } else if(line.slope.denom == 0){ if(line.start.x == x) return line.start.y; else{ *error = 1; return -1; } } else if(line.slope.num == 0){ return line.start.y; } } The function attempts to find the point on a line, given a certain x value. However, under some circumstances, this may not be possible. For example, on the line x = 3, if 5 is passed as a value, we would have a problem. Another problem arises if the chosen x value is not within the interval the line is on. For this, I included the error pointer. Given this format, a function call could work as follows: void foo(PHYS_Line some_line){ unsigned short error = 0; float y = getYValueAt(5, some_line, &error); if(error) fooey(); else do_something_with_y(y); } My question pertains to the error. Note that the value returned is allowed to be negative. Returning -1 does not ensure that an error has occurred. I know that it is sometimes preferred to use the following method to track an error: float* getYValueAt(float x, PHYS_Line line); and then return NULL if an error occurs, but I believe this requires dynamic memory allocation, which seems even less sightly than the solution I was using. So, what is standard practice for an error occurring?

Read the article

Error when deploying site of a maven multi module project with FTP

- by julien

I have a multi module project. When I launch mvn site:deploy, the deployment of the base module works fine, but it fails to create the directory of the module sites on the FTP server: [INFO] Error uploading site Embedded error: Required directory: '/myremoteftprepository/myproject-mymodule' is missing When I create the missing directory by hand, it works fine, but I would like to avoid that. It is surprising that the deploy command do not create it. Do you how to force this directory creation? Is it a bug in the wagon-ftp plugin? FYI, here is my POM: <build> <extensions>  <extension> <groupId>org.apache.maven.wagon</groupId> <artifactId>wagon-ftp</artifactId> <version>1.0</version> </extension> </extensions> </build> I have chosen to include the javadoc with: <reporting> <plugins>  <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-javadoc-plugin</artifactId> <version>2.8</version> <configuration> <show>public</show> </configuration> </plugin> </plugins> </reporting> and <distributionManagement> <site> <id>site</id> <name>maven site</name> <url>ftp://ftp.blabla.org/myremoteftprepository</url> </site> </distributionManagement> and my settings.xml is good.

Read the article

Problems with starting windows service on windows xp SP3

- by Michiel Peeters

I'm currently facing a problem which I can not resolve and I really don't know what to do anymore. When I'm trying to start the service I receive the message: "The service is started but again also stopped, this because that some of the services will stop if they have nothing to do, for example the performance logs and the alerts service". I've looked into the Windows Logs but nothing is written there which could describe why my service is all the time stopping. I've also tried to fire the windows service via the command prompt which gives me the message: "The service is not started, but the service didn't return any faults.". I've tried to remove all keys which references to my service, which didn't resolve the issue. I've searched on google (maybe not good enough) to find an answer but I didn't found any. I did found some websites which describes what I could do, but all of these suggestions didn't work. This is kinda ** because I do not know where to look. I do not have any error message, i do not have any id which i can use to search on. I really don't know where to start and I hope you guys can help me on this one. Detailed explanation about the windows service OS: Windows XP SP3 .Net Framework: .Net 4.0 Client Profile Language: C# Development environment: Visual Studio 2010 Professional (but Visual Studio 2012 RC is installed) Communications: WCF (Named Pipes), WCF (BasicHTTPBinding) Named Pipes: I have chosen for this solution because I wanted to communicate from a windows service to a windows form application. It worked now for quite some time but suddenly my windows service shuts it self down and I couldn't restart it anymore. There are two named pipes services implemented: An event service which will send any notification to the windows form application and an management service which gives my windows form application the possibility to maintain my windows service. BasicHTTPBinding: The basic http binding makes the connection to a central server. This connection is then used for streaming information from the client to the server. I do not know which additional information you will need, but if you guys need something then I'll try to give it as detailed as possible. Thank you in advance.

Read the article

Php random row help...

- by Skillman

I've created some code that will return a random row, (well, all the rows in a random order) But i'm assuming its VERY uneffiecent and is gonna be a problem in a big database... Anyone know of a better way? Here is my current code: $count3 = 1; $count4 = 1; //Civilian stuff... $query = ("SELECT * FROM `*Table Name*` ORDER BY `Id` ASC"); $result = mysql_query($query); while($row = mysql_fetch_array($result)) { $count = $count + 1; $civilianid = $row['Id']; $arrayofids[$count] = $civilianid; //echo $arrayofids[$count]; } while($alldone != true) { $randomnum = (rand()%$count) + 1; //echo $randomnum . "<br>"; //echo $arrayofids[$randomnum] . "<br>"; $currentuserid = $arrayofids[$randomnum]; $count3 += 1; while($count4 < $count3) { $count4 += 1; $currentarrayid = $listdone[$count4]; //echo "<b>" . $currentarrayid . ":" . $currentuserid . "</b> "; if ($currentarrayid == $currentuserid){ $found = true; //echo " '" .$found. "' "; } } if ($found == true) { //Reset array/variables... $count4 = 1; $found = false; } else { $listdone[$count3] = $currentuserid; //echo "<u>" . $count3 .";". $listdone[$count3] . "</u> "; $query = ("SELECT * FROM `*Tablesname*` WHERE Id = '$currentuserid'"); $result = mysql_query($query); $row = mysql_fetch_array($result); $username = $row['Username']; echo $username . "<br>"; $count4 = 1; $amountdone += 1; if ($amountdone == $count) { //$count $alldone = true; } } } Basically it will loop until its gets an id (randomly) that hasnt been chosen yet. -So the last username could take hours :P Is this 'bad' code? :P :(

Read the article

PHP array performance

- by dfo

Hi, this is my first question on Stackoverflow, please bear with me. I'm testing an algorithm for 2d bin packing and I've chosen PHP to mock it up as it's my bread-and-butter language nowadays. As you can see on http://themworks.com/pack_v0.2/oopack.php?ol=1 it works pretty well, but you need to wait around 10-20 seconds for 100 rectangles to pack. For some hard to handle sets it would hit the php's 30s runtime limit. I did some profiling and it shows that most of the time my script goes through different parts of a small 2d array with 0's and 1's in it. It either checks if certain cell equals to 0/1 or sets it to 0/1. It can do such operations million times and each times it takes few microseconds. I guess I could use an array of booleans in a statically typed language and things would be faster. Or even make an array of 1 bit values. I'm thinking of converting the whole thing to some compiled language. Is PHP just not good for it? If I do need to convert it to let's say C++, how good are the automatic converters? My script is just a lot of for loops with basic arrays and objects manipulations. Thank you! Edit. This function gets called more than any other. It reads few properties of a very simple object, and goes through a very small part of a smallish array to check if there's any element not equal to 0. function fits($bin, $file, $x, $y) { $flag = true; $xw = $x + $file->get_width();; $yh = $y + $file->get_height(); for ($i = $x; $i < $xw; $i++) { for ($j = $y; $j < $yh; $j++) { if ($bin[$i][$j] !== 0) { $flag = false; break; } } if (!$flag) break; } return $flag; }

Read the article

Week in Geek: USDA Chooses Microsoft for Cloud Services Edition

- by Asian Angel

This week we learned how to create geeky LED holiday lights with old bottles, dig deeper in Windows Defrag via the command prompt, use Google Chrome’s drag/drop feature to upload files easier, find great gift recommendations by looking through the How-To Geek holiday gift guide, and have fun adding Merry Christmas fonts to our computers. Photo by ntr23. Random Geek Links It has been a busy week, so we have extra news link goodness with information that is good for you to know. USDA making the move to Microsoft The U.S. Department of Agriculture has announced that it has chosen Microsoft to host things like e-mail, instant messaging, and collaboration through the software giant’s Business Productivity Online Suite. Google says it was cut off from USDA project bid Google is claiming that it was not given a chance to bid on a cloud-computing project for the U.S. Department of Agriculture, for which the contract was awarded to rival Microsoft. Apache is being forced into a Java Fork When Oracle rolled over Apache and Google’s objections to its Java plans in December, the scene was set for Apache to leave and, eventually, force a Java code fork. Tumblr explains daylong outage After experiencing an outage that started on Sunday afternoon and stretched through most of the day yesterday, Tumblr has explained what happened. Google demos Chrome OS, launches pilot program During a press briefing this week in San Francisco, Google launched the Chrome application store and demonstrated Chrome OS, its browser-centric netbook operating system. Don’t expect Spotify in U.S. this holiday season As of last week, Spotify had yet to sign a single licensing deal with a major label, after spending more than a year negotiating, multiple music sources told CNET. December 2010 Patch Tuesday will come with most bulletins ever According to the Microsoft Security Response Center, Microsoft will issue 17 Security Bulletins addressing 40 vulnerabilities on Tuesday, December 14. It will also host a webcast to address customer questions the following day. Hacker plants back door in Symbian firmware Indian hacker Atul Alex has had a look at the firmware for Symbian S60 smartphones and come up with a back door for it. PC quarantines raise tough complexities The concept of quarantining PCs to prevent widespread infection is “interesting, but difficult to implement, with far too many problems”, said security experts. Symantec: DDoS attacks hard to defend It has surfaced that the distributed denial of service (DDoS) attacks on Visa and MasterCard Web sites on Wednesday were carried out by a toolkit known as low orbit ion cannon (LOIC). Web Sockets and the risks of unfinished standards Enthusiasm for a promising new standard called Web Sockets has quickly cooled in some quarters as a potential security problem led some browser makers to hastily postpone support. Internet Explorer 9 to get tracking protection Microsoft is making changes to Internet Explorer 9’s security features that will better enable users to keep sites from tracking their activity across browsing sessions. NASA sold PCs with sensitive data NASA failed to remove sensitive data from computers that it sold, according to an audit report released this week. Cybercrooks create fake Amazon receipts The bad guys have created yet another online scam, this one involving fake Amazon receipts. World of Warcraft character move fees waived Until December 22, Blizzard will allow free realm transfers from 25 highly populated servers to alleviate log-in queues or performance issues. (The free transfers are one-way and one-time only.) SpaceX Dragon reaches orbit atop a Falcon with a fiery tail The Space Exploration Technologies corporation has become the first nongovernmental entity to put a vehicle into low Earth orbit. Geek Video of the Week If birds have wings, then why are the Angry Birds using slingshots? Photo by Dorkly Bits. Wait… Birds have Wings, Why are the Angry Ones Using Slingshots? Sysadmin Geek Tips How To Setup Email Alerts on Linux Using Gmail or SMTP Linux machines may require administrative intervention in countless ways, but without manually logging into them how would you know about it? Here’s how to setup emails to get notified when your machines want some tender love and attention. Random TinyHacker Links Red Panda Webcam Support Firefox and the Knoxville Zoo’s Red Panda program. Christmas Icons (Icons we like) Superb set of holiday icons by lgp85 at deviantArt. Download the .zip and use as .png or convert to .ico at Convertico.com or with tiny app Imagicon. Super User Questions Enjoy reading the great answers to this week’s popular questions from Super User Useful USB boot disks? DVD/CD burning .zip: is it more reliable, faster, longer lasting to burn a zip of files rather than the files as a folder? What are other ways to backup my files if I do not have an external drive? Anti virus what is the difference between these all? How can I block all Facebook elements/content? How-To Geek Weekly Article Recap Have you had a busy week between work and preparing for the holidays? Get caught up on your HTG reading with our hottest articles of the week. 20 Windows Keyboard Shortcuts You Might Not Know The 50 Best Registry Hacks that Make Windows Better LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology HTG Explains: Which Linux File System Should You Choose? How to Use and Customize Google Chrome Web Apps One Year Ago on How-To Geek This week’s batch of retro geeky goodness is all about customizing Windows 7. ClassicShell Adds Classic Start Menu and Explorer Features to Windows 7 Get an Aero-Styled Classic Start Menu in Windows 7 Customize the Windows 7 Logon Screen Get the Classic Style Network Activity Indicator Back in Windows 7 How To Enable Check Boxes for Items In Windows 7 The Geek Note We would like you to join us in welcoming Jason Fitzpatrick to the writing staff here at How-To Geek. He started with us this past week, so take some time to read through his articles about the Wii, Kindle, & PlayStation 2 Peripherals and leave a friendly comment to say “Hi”! Got a great tip to share? Make sure to send it in to us at [email protected]. Photo by real00. Latest Features How-To Geek ETC The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek Settle into Orbit with the Voyage Theme for Chrome and Iron Awesome Safari Compass Icons Set Escape from the Exploding Planet Wallpaper Move Your Tumblr Blog to WordPress Pytask is an Easy to Use To-Do List Manager for Your Ubuntu System Snowy Christmas House Personas Theme for Firefox

Read the article

TFS 2010 Basic Concepts

- by jehan

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Here, I’m going to discuss some key Architectural changes and concepts that have taken place in TFS 2010 when compared to TFS 2008. In TFS 2010 Installation, First you need to do the Installation and then you have to configure the Installation Feature from the available features. This is bit similar to SharePoint Installation, where you will first do the Installation and then configure the SharePoint Farms. 1) Installation Features available in TFS2010: a) Basic: It is the most compact TFS installation possible. It will install and configure Source Control, Work Item tracking and Build Services only. (SharePoint and Reporting Integration will not be possible). b) Standard Single Server: This is suitable for Single Server deployment of TFS. It will install and configure Windows SharePoint Services for you and will use the default instance of SQL Server. c) Advanced: It is suitable, if you want use Remote Servers for SQL Server Databases, SharePoint Products and Technologies and SQL Server Reporting Services. d) Application Tier Only: If you want to configure high availability for Team Foundation Server in a Load Balanced Environment (NLB) or you want to move Team Foundation Server from one server to other or you want to restore TFS. e) Upgrade: If you want to upgrade from a prior version of TFS. Note: One more important thing to know here about TFS 2010 Basic is that, it can be installed on Client Operations Systems(Windows 7 and Windows Vista SP3), Where as earlier you cannot Install previous version of TFS (2008 and 2005) on client OS. 2) Team Project Collections: Connect to TFS dialog box in TFS 2008: In TFS 2008, the TFS Server contains a set of Team Projects and each project may or may not be independent of other projects and every checkin gets a ever increasing changeset ID irrespective of the team project in which it is checked in and the same applies to work items also, who also gets unique Work Item Ids.The main problem with this approach was that there are certain things which were impossible to do; those were required as per the Application Development Process. a) If something has gone wrong in one team project and now you want to restore it back to earlier state where it was working properly then it requires you to restore the Database of Team Foundation Server from the backup you have taken as per your Maintenance plans and because of this the other team projects may lose out on the work which is not backed up. b) Your company had a merge with some other company and now you have two TFS servers. One TFS Server which you are working on and other TFS server which other company was working and now after the merge you want to integrate the team projects from two TFS servers into one, which is almost impossible to achieve in TFS 2008. Though you can create the Team Projects in one server manually (In Source Control) which you want to integrate from the other TFS Server, but will lose out on History of Change Sets and Work items and others which are very important. There were few more issues of this sort, which were difficult to resolve in TFS 2008. To resolve issues related to above kind of scenarios which were mainly related TFS Maintenance, Integration, migration and Security, Microsoft has come up with Team Project Collections concept in TFS 2010.This concept is similar to SharePoint Site Collections and if you are familiar with SharePoint Architecture, then it will help you to understand TFS 2010 Architecture easily. Connect to TFS dialog box in TFS 2010: In above dialog box as you can see there are two Team Project Collections, each team project can contain any number of team projects as you can see on right side it shows the two Team Projects in Team Project Collection (Default Collection) which I have chosen. Note: You can connect to only one Team project Collection at a time using an instance of TFS Team Explorer. How does it work? To introduce Team Project Collections, changes have been done in reorganization of TFS databases. TFS 2008 was composed of 5-7 databases partitioned by subsystem (each for Version Control, Work Item Tracking, Build, Integration, Project Management...) New TFS 2010 database architecture: TFS_Config: It’s the root database and it contains centralized TFS configuration data, including the list of all team projects exist in TFS server. TFS_Warehouse: The data warehouse contains all the reporting data of served by this server (farm). TFS_* : This contains individual team project collection data. This database contains all the operational data of team project collection regardless of subsystem.In additional to this, you will have databases for SharePoint and Report Server. 3) TFS Farms: As TFS 2010 is more flexible to configure as multiple Application tiers and multiple Database tiers, so it will be more appropriate to call as TFS Farm if you going for multi server installation of TFS. NLB support for TFS application tiers – With TFS 2010: you can configure multiple TFS application tier machines to serve the same set of Team Project Collections. The primary purpose of NLB support is to enable a cleaner and more complete high availability than in TFS 2008. Even if any application tier in the farm fails then farm will automatically continue to work with hardly any indication to end users of a problem. SQL data tiers: With 2010 you can configure many SQL Servers. Each Database can be configured to be on any SQL Server because each Team Project Collection is an independent database. This feature can also be used to load balance databases across SQL Servers.These new capabilities will significantly change the way enterprises manage their TFS installations in the future. With Team Project Collections and TFS farms, you can create a single, arbitrarily large TFS installation. You can grow it incrementally by adding ATs and SQL Servers as needed.

Read the article

Adding DTrace Probes to PHP Extensions

- by cj

The powerful DTrace tracing facility has some PHP-specific probes that can be enabled with --enable-dtrace. DTrace for Linux is being created by Oracle and is currently in tech preview. Currently it doesn't support userspace tracing so, in the meantime, Systemtap can be used to monitor the probes implemented in PHP. This was recently outlined in David Soria Parra's post Probing PHP with Systemtap on Linux. My post shows how DTrace probes can be added to PHP extensions and traced on Linux. I was using Oracle Linux 6.3. Not all Linux kernels are built with Systemtap, since this can impact stability. Check whether your running kernel (or others installed) have Systemtap enabled, and reboot with such a kernel: # grep CONFIG_UTRACE /boot/config-`uname -r` # grep CONFIG_UTRACE /boot/config-* When you install Systemtap itself, the package systemtap-sdt-devel is needed since it provides the sdt.h header file: # yum install systemtap-sdt-devel You can now install and build PHP as shown in David's article. Basically the build is with: $ cd ~/php-src $ ./configure --disable-all --enable-dtrace $ make (For me, running 'make' a second time failed with an error. The workaround is to do 'git checkout Zend/zend_dtrace.d' and then rerun 'make'. See PHP Bug 63704) David's article shows how to trace the probes already implemented in PHP. You can also use Systemtap to trace things like userspace PHP function calls. For example, create test.php: <?php $c = oci_connect('hr', 'welcome', 'localhost/orcl'); $s = oci_parse($c, "select dbms_xmlgen.getxml('select * from dual') xml from dual"); $r = oci_execute($s); $row = oci_fetch_array($s, OCI_NUM); $x = $row[0]->load(); $row[0]->free(); echo $x; ?> The normal output of this file is the XML form of Oracle's DUAL table: $ ./sapi/cli/php ~/test.php <?xml version="1.0"?> <ROWSET> <ROW> <DUMMY>X</DUMMY> </ROW> </ROWSET> To trace the PHP function calls, create the tracing file functrace.stp: probe process("sapi/cli/php").function("zif_*") { printf("Started function %s\n", probefunc()); } probe process("sapi/cli/php").function("zif_*").return { printf("Ended function %s\n", probefunc()); } This makes use of the way PHP userspace functions (not builtins) like oci_connect() map to C functions with a "zif_" prefix. Login as root, and run System tap on the PHP script: # cd ~cjones/php-src # stap -c 'sapi/cli/php ~cjones/test.php' ~cjones/functrace.stp Started function zif_oci_connect Ended function zif_oci_connect Started function zif_oci_parse Ended function zif_oci_parse Started function zif_oci_execute Ended function zif_oci_execute Started function zif_oci_fetch_array Ended function zif_oci_fetch_array Started function zif_oci_lob_load <?xml version="1.0"?> <ROWSET> <ROW> <DUMMY>X</DUMMY> </ROW> </ROWSET> Ended function zif_oci_lob_load Started function zif_oci_free_descriptor Ended function zif_oci_free_descriptor Each call and return is logged. The Systemtap scripting language allows complex scripts to be built. There are many examples on the web. To augment this generic capability and the PHP probes in PHP, other extensions can have probes too. Below are the steps I used to add probes to OCI8: I created a provider file ext/oci8/oci8_dtrace.d, enabling three probes. The first one will accept a parameter that runtime tracing can later display: provider php { probe oci8__connect(char *username); probe oci8__nls_start(); probe oci8__nls_done(); }; I updated ext/oci8/config.m4 with the PHP_INIT_DTRACE macro. The patch is at the end of config.m4. The macro takes the provider prototype file, a name of the header file that 'dtrace' will generate, and a list of sources files with probes. When --enable-dtrace is used during PHP configuration, then the outer $PHP_DTRACE check is true and my new probes will be enabled. I've chosen to define an OCI8 specific macro, HAVE_OCI8_DTRACE, which can be used in the OCI8 source code: diff --git a/ext/oci8/config.m4 b/ext/oci8/config.m4 index 34ae76c..f3e583d 100644 --- a/ext/oci8/config.m4 +++ b/ext/oci8/config.m4 @@ -341,4 +341,17 @@ if test "$PHP_OCI8" != "no"; then PHP_SUBST_OLD(OCI8_ORACLE_VERSION) fi + + if test "$PHP_DTRACE" = "yes"; then + AC_CHECK_HEADERS([sys/sdt.h], [ + PHP_INIT_DTRACE([ext/oci8/oci8_dtrace.d], + [ext/oci8/oci8_dtrace_gen.h],[ext/oci8/oci8.c]) + AC_DEFINE(HAVE_OCI8_DTRACE,1, + [Whether to enable DTrace support for OCI8 ]) + ], [ + AC_MSG_ERROR( + [Cannot find sys/sdt.h which is required for DTrace support]) + ]) + fi + fi In ext/oci8/oci8.c, I added the probes at, for this example, semi-arbitrary places: diff --git a/ext/oci8/oci8.c b/ext/oci8/oci8.c index e2241cf..ffa0168 100644 --- a/ext/oci8/oci8.c +++ b/ext/oci8/oci8.c @@ -1811,6 +1811,12 @@ php_oci_connection *php_oci_do_connect_ex(char *username, int username_len, char } } +#ifdef HAVE_OCI8_DTRACE + if (DTRACE_OCI8_CONNECT_ENABLED()) { + DTRACE_OCI8_CONNECT(username); + } +#endif + /* Initialize global handles if they weren't initialized before */ if (OCI_G(env) == NULL) { php_oci_init_global_handles(TSRMLS_C); @@ -1870,11 +1876,22 @@ php_oci_connection *php_oci_do_connect_ex(char *username, int username_len, char size_t rsize = 0; sword result; +#ifdef HAVE_OCI8_DTRACE + if (DTRACE_OCI8_NLS_START_ENABLED()) { + DTRACE_OCI8_NLS_START(); + } +#endif PHP_OCI_CALL_RETURN(result, OCINlsEnvironmentVariableGet, (&charsetid_nls_lang, 0, OCI_NLS_CHARSET_ID, 0, &rsize)); if (result != OCI_SUCCESS) { charsetid_nls_lang = 0; } smart_str_append_unsigned_ex(&hashed_details, charsetid_nls_lang, 0); + +#ifdef HAVE_OCI8_DTRACE + if (DTRACE_OCI8_NLS_DONE_ENABLED()) { + DTRACE_OCI8_NLS_DONE(); + } +#endif } timestamp = time(NULL); The oci_connect(), oci_pconnect() and oci_new_connect() calls all use php_oci_do_connect_ex() internally. The first probe simply records that the PHP application made a connection call. I already showed a way to do this without needing a probe, but adding a specific probe lets me record the username. The other two probes can be used to time how long the globalization initialization takes. The relationships between the oci8_dtrace.d names like oci8__connect, the probe guards like DTRACE_OCI8_CONNECT_ENABLED() and probe names like DTRACE_OCI8_CONNECT() are obvious after seeing the pattern of all three probes. I included the new header that will be automatically created by the dtrace tool when PHP is built. I did this in ext/oci8/php_oci8_int.h: diff --git a/ext/oci8/php_oci8_int.h b/ext/oci8/php_oci8_int.h index b0d6516..c81fc5a 100644 --- a/ext/oci8/php_oci8_int.h +++ b/ext/oci8/php_oci8_int.h @@ -44,6 +44,10 @@ # endif # endif /* osf alpha */ +#ifdef HAVE_OCI8_DTRACE +#include "oci8_dtrace_gen.h" +#endif + #if defined(min) #undef min #endif Now PHP can be rebuilt: $ cd ~/php-src $ rm configure && ./buildconf --force $ ./configure --disable-all --enable-dtrace \ --with-oci8=instantclient,/home/cjones/instantclient $ make If 'make' fails, do the 'git checkout Zend/zend_dtrace.d' trick I mentioned. The new probes can be seen by logging in as root and running: # stap -l 'process.provider("php").mark("oci8*")' -c 'sapi/cli/php -i' process("sapi/cli/php").provider("php").mark("oci8__connect") process("sapi/cli/php").provider("php").mark("oci8__nls_done") process("sapi/cli/php").provider("php").mark("oci8__nls_start") To test them out, create a new trace file, oci.stp: global numconnects; global start; global numcharlookups = 0; global tottime = 0; probe process.provider("php").mark("oci8-connect") { printf("Connected as %s\n", user_string($arg1)); numconnects += 1; } probe process.provider("php").mark("oci8-nls_start") { start = gettimeofday_us(); numcharlookups++; } probe process.provider("php").mark("oci8-nls_done") { tottime += gettimeofday_us() - start; } probe end { printf("Connects: %d, Charset lookups: %ld\n", numconnects, numcharlookups); printf("Total NLS charset initalization time: %ld usecs/connect\n", (numcharlookups 0 ? tottime/numcharlookups : 0)); } This calculates the average time that the NLS character set lookup takes. It also prints out the username of each connection, as an example of using parameters. Login as root and run Systemtap over the PHP script: # cd ~cjones/php-src # stap -c 'sapi/cli/php ~cjones/test.php' ~cjones/oci.stp Connected as cj <?xml version="1.0"?> <ROWSET> <ROW> <DUMMY>X</DUMMY> </ROW> </ROWSET> Connects: 1, Charset lookups: 1 Total NLS charset initalization time: 164 usecs/connect This shows the time penalty of making OCI8 look up the default character set. This time would be zero if a character set had been passed as the fourth argument to oci_connect() in test.php.

Read the article

Find More Streaming TV Online with Clicker.tv

- by DigitalGeekery

Looking for a way to access more of your favorite TV Shows and other online entertainment? Today we’ll take a look at Clicker.tv which offers an awesome way to find tons of TV programs and movies. Clicker.tv Clicker.tv is an HTML5 web application that indexes both free and premium content from sources like Hulu, Netflix, Amazon, iTunes, and more. Some movies or episodes, such as those from Netflix and Amazon.com’s Video on Demand, will require viewers to have a membership, or pay a fee to access content. There is also a Clicker.tv app for Boxee. Navigation Navigating in Clicker.tv is rather easy with your keyboard. Directional Keys: navigate up, down, left, and right. Enter: make a selection Backspace: return to previous screen Escape: return to the Clicker.tv home screen. Note: You can also navigate through Clicker.tv with your PC remote. Recommended Browsers Firefox 3.6 + Safari 4.0 + Internet Explorer 8 + Google Chrome Note: You’ll need the latest version of Flash installed to play the majority of content. Earlier versions of the above browsers may work, but for full keyboard functionality, stick with the recommendations. Using Clicker.tv The first time you go to Clicker.tv, (link below) you’ll be met with a welcome screen and some helpful hints. Click Enter when finished. The Home screen feature Headliners, Trending Shows, and Trending Episodes. You can scroll through the different options and category links along the left side. The Search link pulls up an onscreen keyboard so you can enter search terms with a remote as well as a keyboard. Type in your search terms and matching items are displayed on the screen. You can also browse by a wide variety of categories. Select TV to browse only available TV programs. Or, browse only Movies in the movie category. There are also links for Web content and Music. Creating an Account You can access all Clicker.tv content without an account, but a Clicker account allows users to create playlists and subscribe to shows and have them automatically added to their playlist. You’ll need to go to Clicker.com and create an account. You’ll find the link at the upper right of the page. Enter a username, password and email address. There also an option to link with Facebook, or you can simply Skip this step. Go to Clicker.tv and sign in. You can manually type in your credentials or use the onscreen keyboard with your remote. Settings If you’d prefer not to display content from premium sites or Netflix, you can remove them through the Settings. Toggle Amazon, iTunes and Netflix on or off. Watching Episodes To watch an episode, select the image to begin playing from the default source, or select one of the other options. You can see in the example below that you can choose to watch the episode from Fox, Hulu, or Amazon Video on Demand. Your episode will then launch and begin playing from your chosen source. If you choose a premium content source such as iTunes or Amazon’s VOD, you’ll be taken to the Amazon’s website or iTunes and prompted to purchase the content. Playlists Once you’ve created an account and signed in, you can begin adding Shows to your playlist. Choose a series and select Add to Playlist. You’ll see in the example below that Family Guy has been Added and the number 142 is shown next to the playlist icon to indicate that 142 episodes has been added to your playlist. Underneath the listings for each episode in your playlist you can mark as Watched, or Remove individual episodes. You can also view the playlist or make any changes from the Clicker.com website. Click on “Playlist” on the top right of the Clicker.com site to access your playlists. You can select individual episodes from your playlists, remove them, or mark them as watched or unwatched. Clicker.TV and Boxee Boxee offers a Clicker.TV app that features a limited amount of the Clicker.TV content. You’ll find Clicker.TV located in the Boxee Apps Library. Select the Clicker App and then choose Start. From the Clicker App interface you can search or browse for available content. Select an episode you’d like to view… Then select play in the pop up window. You can also add it to your Boxee queue, share it, or add a shortcut, just as you can from other Boxee apps. When you click play your episode will launch and begin playing in Boxee. Conclusion Clicker.TV is currently still in Beta and has some limitations. Typical remotes won’t work completely in all external websites. So, you’ll still need a keyboard to be able to perform some operations such as switching to full screen mode. The Boxee app offers a more fully remote friendly environment, but unfortunately lacks a good portion of the Clicker.tv content. As with many content sites, availability of certain programming may be limited by your geographic location. Want to add Clicker.TV functionality to Windows Media Center? You can do so through the Boxee Integration for Windows 7 Media Center plug-in. Clicker.tv Clicker.com Similar Articles Productive Geek Tips Share Digital Media With Other Computers on a Home Network with Windows 7Stream Music and Video Over the Internet with Windows Media Player 12Listen to Online Radio with AntennaEnable Media Streaming in Windows Home Server to Windows Media PlayerNorton Internet Security 2010 [Review] TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos

Read the article

Session memory – who’s this guy named Max and what’s he doing with my memory?

- by extended_events

SQL Server MVP Jonathan Kehayias (blog) emailed me a question last week when he noticed that the total memory used by the buffers for an event session was larger than the value he specified for the MAX_MEMORY option in the CREATE EVENT SESSION DDL. The answer here seems like an excellent subject for me to kick-off my new “401 – Internals” tag that identifies posts where I pull back the curtains a bit and let you peek into what’s going on inside the extended events engine. In a previous post (Option Trading: Getting the most out of the event session options) I explained that we use a set of buffers to store the event data before we write the event data to asynchronous targets. The MAX_MEMORY along with the MEMORY_PARTITION_MODE defines how big each buffer will be. Theoretically, that means that I can predict the size of each buffer using the following formula: max memory / # of buffers = buffer size If it was that simple I wouldn’t be writing this post. I’ll take “boundary” for 64K Alex For a number of reasons that are beyond the scope of this blog, we create event buffers in 64K chunks. The result of this is that the buffer size indicated by the formula above is rounded up to the next 64K boundary and that is the size used to create the buffers. If you think visually, this means that the graph of your max_memory option compared to the actual buffer size that results will look like a set of stairs rather than a smooth line. You can see this behavior by looking at the output of dm_xe_sessions, specifically the fields related to the buffer sizes, over a range of different memory inputs: Note: This test was run on a 2 core machine using per_cpu partitioning which results in 5 buffers. (Seem my previous post referenced above for the math behind buffer count.) input_memory_kb total_regular_buffers regular_buffer_size total_buffer_size 637 5 130867 654335 638 5 130867 654335 639 5 130867 654335 640 5 196403 982015 641 5 196403 982015 642 5 196403 982015 This is just a segment of the results that shows one of the “jumps” between the buffer boundary at 639 KB and 640 KB. You can verify the size boundary by doing the math on the regular_buffer_size field, which is returned in bytes: 196403 – 130867 = 65536 bytes 65536 / 1024 = 64 KB The relationship between the input for max_memory and when the regular_buffer_size is going to jump from one 64K boundary to the next is going to change based on the number of buffers being created. The number of buffers is dependent on the partition mode you choose. If you choose any partition mode other than NONE, the number of buffers will depend on your hardware configuration. (Again, see the earlier post referenced above.) With the default partition mode of none, you always get three buffers, regardless of machine configuration, so I generated a “range table” for max_memory settings between 1 KB and 4096 KB as an example. start_memory_range_kb end_memory_range_kb total_regular_buffers regular_buffer_size total_buffer_size 1 191 NULL NULL NULL 192 383 3 130867 392601 384 575 3 196403 589209 576 767 3 261939 785817 768 959 3 327475 982425 960 1151 3 393011 1179033 1152 1343 3 458547 1375641 1344 1535 3 524083 1572249 1536 1727 3 589619 1768857 1728 1919 3 655155 1965465 1920 2111 3 720691 2162073 2112 2303 3 786227 2358681 2304 2495 3 851763 2555289 2496 2687 3 917299 2751897 2688 2879 3 982835 2948505 2880 3071 3 1048371 3145113 3072 3263 3 1113907 3341721 3264 3455 3 1179443 3538329 3456 3647 3 1244979 3734937 3648 3839 3 1310515 3931545 3840 4031 3 1376051 4128153 4032 4096 3 1441587 4324761 As you can see, there are 21 “steps” within this range and max_memory values below 192 KB fall below the 64K per buffer limit so they generate an error when you attempt to specify them. Max approximates True as memory approaches 64K The upshot of this is that the max_memory option does not imply a contract for the maximum memory that will be used for the session buffers (Those of you who read Take it to the Max (and beyond) know that max_memory is really only referring to the event session buffer memory.) but is more of an estimate of total buffer size to the nearest higher multiple of 64K times the number of buffers you have. The maximum delta between your initial max_memory setting and the true total buffer size occurs right after you break through a 64K boundary, for example if you set max_memory = 576 KB (see the green line in the table), your actual buffer size will be closer to 767 KB in a non-partitioned event session. You get “stepped up” for every 191 KB block of initial max_memory which isn’t likely to cause a problem for most machines. Things get more interesting when you consider a partitioned event session on a computer that has a large number of logical CPUs or NUMA nodes. Since each buffer gets “stepped up” when you break a boundary, the delta can get much larger because it’s multiplied by the number of buffers. For example, a machine with 64 logical CPUs will have 160 buffers using per_cpu partitioning or if you have 8 NUMA nodes configured on that machine you would have 24 buffers when using per_node. If you’ve just broken through a 64K boundary and get “stepped up” to the next buffer size you’ll end up with total buffer size approximately 10240 KB and 1536 KB respectively (64K * # of buffers) larger than max_memory value you might think you’re getting. Using per_cpu partitioning on large machine has the most impact because of the large number of buffers created. If the amount of memory being used by your system within these ranges is important to you then this is something worth paying attention to and considering when you configure your event sessions. The DMV dm_xe_sessions is the tool to use to identify the exact buffer size for your sessions. In addition to the regular buffers (read: event session buffers) you’ll also see the details for large buffers if you have configured MAX_EVENT_SIZE. The “buffer steps” for any given hardware configuration should be static within each partition mode so if you want to have a handy reference available when you configure your event sessions you can use the following code to generate a range table similar to the one above that is applicable for your specific machine and chosen partition mode. DECLARE @buf_size_output table (input_memory_kb bigint, total_regular_buffers bigint, regular_buffer_size bigint, total_buffer_size bigint) DECLARE @buf_size int, @part_mode varchar(8) SET @buf_size = 1 -- Set to the begining of your max_memory range (KB) SET @part_mode = 'per_cpu' -- Set to the partition mode for the table you want to generate WHILE @buf_size <= 4096 -- Set to the end of your max_memory range (KB) BEGIN BEGIN TRY IF EXISTS (SELECT * from sys.server_event_sessions WHERE name = 'buffer_size_test') DROP EVENT SESSION buffer_size_test ON SERVER DECLARE @session nvarchar(max) SET @session = 'create event session buffer_size_test on server add event sql_statement_completed add target ring_buffer with (max_memory = ' + CAST(@buf_size as nvarchar(4)) + ' KB, memory_partition_mode = ' + @part_mode + ')' EXEC sp_executesql @session SET @session = 'alter event session buffer_size_test on server state = start' EXEC sp_executesql @session INSERT @buf_size_output (input_memory_kb, total_regular_buffers, regular_buffer_size, total_buffer_size) SELECT @buf_size, total_regular_buffers, regular_buffer_size, total_buffer_size FROM sys.dm_xe_sessions WHERE name = 'buffer_size_test' END TRY BEGIN CATCH INSERT @buf_size_output (input_memory_kb) SELECT @buf_size END CATCH SET @buf_size = @buf_size + 1 END DROP EVENT SESSION buffer_size_test ON SERVER SELECT MIN(input_memory_kb) start_memory_range_kb, MAX(input_memory_kb) end_memory_range_kb, total_regular_buffers, regular_buffer_size, total_buffer_size from @buf_size_output group by total_regular_buffers, regular_buffer_size, total_buffer_size Thanks to Jonathan for an interesting question and a chance to explore some of the details of Extended Event internals. - Mike

Read the article

C# in Depth, Third Edition by Jon Skeet, Manning Publications Co. Book Review

- by Compudicted

Originally posted on: http://geekswithblogs.net/Compudicted/archive/2013/10/24/c-in-depth-third-edition-by-jon-skeet-manning-publications.aspx I started reading this ebook on September 28, 2013, the same day it was sent my way by Manning Publications Co. for review while it still being fresh off the press. So 1st thing – thanks to Manning for this opportunity and a free copy of this must have on every C# developer’s desk book! Several hours ago I finished reading this book (well, except a for a large portion of its quite lengthy appendix). I jumped writing this review right away while still being full of emotions and impressions from reading it thoroughly and running code examples. Before I go any further I would like say that I used to program on various platforms using various languages starting with the Mainframe and ending on Windows, and I gradually shifted toward dealing with databases more than anything, however it happened with me to program in C# 1 a lot when it was first released and then some C# 2 with a big leap in between to C# 5. So my perception and experience reading this book may differ from yours. Also what I want to tell is somewhat funny that back then, knowing some Java and seeing C# 1 released, initially made me drawing a parallel that it is a copycat language, how wrong was I… Interestingly, Jon programs in Java full time, but how little it was mentioned in the book! So more on the book: Be informed, this is not a typical “Recipes”, “Cookbook” or any set of ready solutions, it is rather targeting mature, advanced developers who do not only know how to use a number of features, but are willing to understand how the language is operating “under the hood”. I must state immediately, at the same time I am glad the author did not go into the murky depths of the MSIL, so this is a very welcome decision on covering a modern language as C# for me, thank you Jon! Frankly, not all was that rosy regarding the tone and structure of the book, especially the the first half or so filled me with several negative and positive emotions overpowering each other. To expand more on that, some statements in the book appeared to be bias to me, or filled with pre-justice, it started to look like it had some PR-sole in it, but thankfully this was all gone toward the end of the 1st third of the book. Specifically, the mention on the C# language popularity, Java is the #1 language as per https://sites.google.com/site/pydatalog/pypl/PyPL-PopularitY-of-Programming-Language (many other sources put C at the top which I highly doubt), also many interesting functional languages as Clojure and Groovy appeared and gained huge traction which run on top of Java/JVM whereas C# does not enjoy such a situation. If we want to discuss the popularity in general and say how fast a developer can find a new job that pays well it would be indeed the very Java, C++ or PHP, never C#. Or that phrase on language preference as a personal issue? We choose where to work or we are chosen because of a technology used at a given software shop, not vice versa. The book though it technically very accurate with valid code, concise examples, but I wish the author would give more concrete, real-life examples on where each feature should be used, not how. Another point to realize before you get the book is that it is almost a live book which started to be written when even C# 3 wasn’t around so a lot of ground is covered (nearly half of the book) on the pre-C# 3 feature releases so if you already have a solid background in the previous releases and do not plan to upgrade, perhaps half of the book can be skipped, otherwise this book is surely highly recommended. Alas, for me it was a hard read, most of it. It was not boring (well, only may be two times), it was just hard to grasp some concepts, but do not get me wrong, it did made me pause, on several occasions, and made me read and re-read a page or two. At times I even wondered if I have any IQ at all (LOL). Be prepared to read A LOT on generics, not that they are widely used in the field (I happen to work as a consultant and went thru a lot of code at many places) I can tell my impression is the developers today in best case program using examples found at OpenStack.com. Also unlike the Java world where having the most recent version is nearly mandated by the OSS most companies on the Microsoft platform almost never tempted to upgrade the .Net version very soon and very often. As a side note, I was glad to see code recently that included a nullable variable (myvariable? notation) and this made me smile, besides, I recommended that person this book to expand her knowledge. The good things about this book is that Jon maintains an active forum, prepared code snippets and even a small program (Snippy) that is happy to run the sample code saving you from writing any plumbing code. A tad now on the C# language itself – it sure enjoyed a wonderful road toward perfection and a very high adoption, especially for ASP development. But to me all the recent features that made this statically typed language more dynamic look strange. Don’t we have F#? Which supposed to be the dynamic language? Why do we need to have a hybrid language? Now the developers live their lives in dualism of the static and dynamic variables! And LINQ to SQL, it is covered in depth, but wasn’t it supposed to be dropped? Also it seems that very little is being added, and at a slower pace, e.g. Roslyn will come in late 2014 perhaps, and will be probably the only main feature. Again, it is quite hard to read this book as various chapters, C# versions mentioned every so often only if I only could remember what was covered exactly where! So the fact it has so many jumps/links back and forth I recommend the ebook format to make the navigations easier to perform and I do recommend using software that allows bookmarking, also make sure you have access to plenty of coffee and pizza (hey, you probably know this joke – who a programmer is) ! In terms of closing, if you stuck at C# 1 or 2 level, it is time to embrace the power of C# 5! Finally, to compliment Manning, this book unlike from any other publisher so far, was the only one as well readable (put it formatted) on my tablet as in Adobe Reader on a laptop.

Read the article

Use Those Extra Mouse Buttons to Increase Efficiency

- by Mark Virtue

Did you know that the most commonly used mouse actions are clicking a window’s “Close” button (the X in the top-right corner), and clicking the “Back” button (in a browser and various other programs)? How much time do you spend every day locating the Close button or the Back button with your mouse so that you can click on them? And what about that mouse you’re using – how many buttons does it have, besides the two main ones? Most mouses these days have at least four (including the scroll-wheel, which a lot of people don’t realize is also a button as well). Why not assign those extra buttons to your most common mouse actions, and save yourself a bundle of mousing-around time every day? If your mouse was manufactured by one of the “premium” mouse manufacturers (Microsoft, Logitech, etc), it almost certain came with driver software to allow you to customize your mouse’s controls and take advantage of your mouse’s special features. Microsoft, for example, provides driver software called IntelliPoint (link below), while Logitech provides SetPoint. It’s possible that your mouse has some extra buttons but doesn’t come with its own driver software (the author is using a Microsoft Bluetooth Notebook Mouse 5000, which amazingly is not supported by the Microsoft IntelliPoint software!). If your mouse falls into this category, you can use a marvelous free product called X-Mouse Button Control, from Highresolution Enterprises (link below). It provides a truly amazing array of mouse configuration options, including assigning actions to buttons on a per-application basis. Once X-Mouse Button Control is downloaded, its setup process is quite straightforward. Once downloaded, you can start the program via Start / Highresolution Enterprises / X-Mouse Button Control. You will find the program’s icon in the system tray: Right-click on the icon and select Setup from the pop-up menu. The program’s configuration window appears: It’s extremely unlikely that we will want to change the functionality of our mouse’s two main buttons (left and right), so instead we’ll look at the rest of the options on the right side of the window. The Middle Button refers to either the third, middle button (found on some old mouses), or the pressing of the wheel itself, as a button (if you didn’t know you could press your wheel like a button, try it out now). Mouse Button 4 and Mouse Button 5 usually refer to the extra buttons found on the side of the mouse, often near your thumb. So what can we use these extra mouse buttons for? Well, clearly Close and Back are two obvious candidates. Each of these can be found by selecting them from the drop-down menu next to each button field: Once the two options are chosen, the window will look something like this: If you’re not interested in choosing Back or Close, you may like to try some of the other options in the list, including: Cut, Copy and Paste Undo Show the Desktop Next/Previous track (for media playback) Open any program Simulate any keystroke or combination of keystrokes ….and many other options. Explore the drop-down list to see them all. You may decide, for example, that closing the current document (as opposed to the current program) would be a good use for Mouse Button 5. In other words, we need to simulate the keypress of Ctrl-F4. Let’s see how we achieve this. First we select Simulated Keystrokes from the drop-down list: The Simulated Keystrokes window opens: The instructions on the page are pretty comprehensive. If you want to simulate the Ctrl-F4 keystroke, you need to type {CTRL}{F4} into the box: …and then click OK. Assigning Actions to Buttons on a Per-Application Basis One of the most powerful features of X-Mouse Button Control is the ability to assign actions to buttons on a per-application basis. This means that if we have a particular program open, then our mouse will behave differently – our buttons will do different things. For example, when we have Windows Media Player open, for example, we may wish to have buttons assigned to Play/Pause, Next track and Previous track, as well as changing the volume with the mouse! This is easy with X-Mouse Button Control. We start by opening Windows Media Player. This makes the next step easier. Then we return to X-Mouse Button Control and add a new “configuration”. This is done by clicking the Add button: A window opens containing a list of all running programs, including our recently opened Windows Media Player: We select Windows Media Player and click OK. A new, blank “configuration” is created: We repeat the earlier steps to assign buttons to Play/Pause, Next track and Previous track, and assign scrolling the wheel to alter the volume: To save all our changes and close the window, we click Apply. Now spend a few minutes thinking of all the applications you use the most, and what are the most common simple tasks you perform in each of those applications. Those tasks are then perfect candidates for per-application button assignments. There are many more configuration options and capabilities of X-Mouse Button Control – too many to list here. We encourage you to spend a bit of time exploring the Setup window. Then, most important of all, don’t forget to use your new mouse buttons! Get into the habit of using them, and then after a while you’ll start to wonder how you ever tolerated the laborious, tedious, time-consuming process of actually locating each window’s Close button… Download X-Mouse Button Control Highresolution Enterprise Similar Articles Productive Geek Tips Add Specialized Toolbar Buttons to Firefox the Easy WayBoost Your Mouse Pointing Accuracy in WindowsMake Mouse Navigation Faster in WindowsVista Style Popup Previews for Firefox TabsStupid Geek Tricks: Using the Quick Zoom Feature in Outlook TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images Get Wildlife Photography Tips at BBC’s PhotoMasterClasses Mashpedia is a Real-time Encyclopedia

Read the article

Customize the Five Windows Folder Templates

- by Mark Virtue

Are you’re particular about the way Windows Explorer presents each folder’s contents? Here we show you how to take advantage of Explorer’s built-in templates, which cuts down the time it takes to do customizations. Note: The techniques in this article apply to Windows XP, Vista, and Windows 7. When opening a folder for the first time in Windows Explorer, we are presented with a standard default view of the files and folders in that folder. It may be that the items are presented are perfectly fine, but on the other hand, we may want to customize the view. The aspects of it that we can customize are the following: The display type (list view, details, tiles, thumbnails, etc) Which columns are displayed, and in which order The widths of the visible columns The order in which the files and folders are sorted Any file groupings Thankfully, Windows offers us a shortcut. A particular folder’s settings can be used as a “template” for other, similar folders. In fact, we can store up to five separate sets of folder presentation configurations. Once we save the settings for a particular template, that template can then be applied to other folders. Customize Your First Folder We’ll start by setting up the first of our templates – the default one. Once we create this template and apply it, the vast majority of the folders in our file system will change to match it, so it’s important that we set it up very carefully. The first step in creating and applying the template is to customize one folder with the settings that all the rest will have. Choose a folder that is typical of the folders that you wish to have this default template. Select it in Windows Explorer. To ensure that it is a suitable candidate, right-click the folder name and select Properties, then go to the Customize tab. Ensure that this folder is marked as General Items. If it is not, either choose a different folder or select General Items from the list. Click OK. Now we’re ready to customize our first folder. Changing the way one single folder is presented is straightforward. We start with the folder’s display type. Click the Change your view button in the top-right corner of every Explorer window. Each time you click the button, the folder’s view cycles to the next view type. Alternatively you can click the little down-arrow next to the button to see all the display types at once, and select the one you want. Click the view you want, or drag the slider next to the one you want. If you have chosen Details, then the next thing you may wish to change is which columns are displayed, and the order of these. To choose which columns are displayed, simply right-click on any column heading. A list of the columns currently being display appears. Simply uncheck a column if you don’t want it displayed, and check the columns that you want displayed. If you want some information displayed about your files that is not listed here, then click the More… button for a full list of file attributes. There’s a lot of them! To change the order of the columns that are currently being displayed, simply click on a column heading and drag it to where you think it should be. To change the width of a column, click the line that represents the right-hand edge of the column and drag it left or right. To sort by a column, click once on that column. To reverse the sort-order, click that same column again. To change the groupings of the files in the folder, right-click in a blank area of the folder, select Group by, and select the appropriate column. Apply This Default Template to All Similar Folders Once you have the folder exactly the way you want it, we now use this folder as our default template for most of the folders in our file system. To do this, ensure that you are still in the folder you just customized, and then, from the Organize menu in Explorer, click on Folder and search options. Then select the View tab and click the Apply to Folders button. After you’ve clicked OK, visit some of the other folders in your file system. You should see that most have taken on these new settings. What we’ve just done, in effect, is we have customized the General Items template. This is one of five templates that Windows Explorer uses to display folder contents. The five templates are called (in Windows 7): General Items Documents Pictures Music Videos When a folder is opened, Windows Explorer examines the contents to see if it can automatically determine which folder template to use to display the folder contents. If it is not obvious that the folder contents falls into any of the last four templates, then Windows Explorer chooses the General Items template. That’s why most of the folders in your file system are shown using the General Items template. Changing the Other Four Templates If you want to adjust the other four templates, the process is very similar to what we’ve just done. If you wanted to change the “Music” template, for example, the steps would be as follows: Select a folder that contains music items Apply the existing Music template to the folder (even if it doesn’t look like you want it to) Customize the folder to your personal preferences Apply the new template to all “Music” folders A fifth step would be: When you open a folder that contains music items but is not automatically displayed using the Music template, you manually select the Music template for that folder. First, select a folder that contains music items. It will probably be displayed using the existing Music template: Next, ensure that it is using the Music template. If it’s not, then manually select the Music template. Next, customize the folder to suit your personal preferences (here we’ve added a couple of columns, and sorted by Artist). Now we can set this view to be our Music template. Choose Organize, then the View tab, and click the Apply to Folders button. Note: The only folders that will inherit these settings are the ones that are currently (or will soon be) using the Music template. Now, if you have any folder that contains music items, and you want it to inherit all of these settings, then right-click the folder name, choose Properties, and select that this folder should use the Music template. You can also cehck the box entitled Also apply this template to all subfolders if you want to save yourself even more time with all the sub-folders. Conclusion It’s neat to be able to set up templates for your folder views like this. It’s a shame that Microsoft didn’t take the concept just a little further and allow you to create as many templates as you want. Similar Articles Productive Geek Tips Fix For When Windows Explorer in Vista Stops Showing File NamesCustomize the Windows 7 or Vista Send To MenuFix for New Contact Group Button Not Displaying in VistaWhy Did Windows Vista’s Music Folder Icon Turn Yellow?Make Your Last Minute Holiday Cards with Microsoft Word TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7

Read the article

LLBLGen Pro feature highlights: grouping model elements

- by FransBouma

(This post is part of a series of posts about features of the LLBLGen Pro system) When working with an entity model which has more than a few entities, it's often convenient to be able to group entities together if they belong to a semantic sub-model. For example, if your entity model has several entities which are about 'security', it would be practical to group them together under the 'security' moniker. This way, you could easily find them back, yet they can be left inside the complete entity model altogether so their relationships with entities outside the group are kept. In other situations your domain consists of semi-separate entity models which all target tables/views which are located in the same database. It then might be convenient to have a single project to manage the complete target database, yet have the entity models separate of each other and have them result in separate code bases. LLBLGen Pro can do both for you. This blog post will illustrate both situations. The feature is called group usage and is controllable through the project settings. This setting is supported on all supported O/R mapper frameworks. Situation one: grouping entities in a single model. This situation is common for entity models which are dense, so many relationships exist between all sub-models: you can't split them up easily into separate models (nor do you likely want to), however it's convenient to have them grouped together into groups inside the entity model at the project level. A typical example for this is the AdventureWorks example database for SQL Server. This database, which is a single catalog, has for each sub-group a schema, however most of these schemas are tightly connected with each other: adding all schemas together will give a model with entities which indirectly are related to all other entities. LLBLGen Pro's default setting for group usage is AsVisualGroupingMechanism which is what this situation is all about: we group the elements for visual purposes, it has no real meaning for the model nor the code generated. Let's reverse engineer AdventureWorks to an entity model. By default, LLBLGen Pro uses the target schema an element is in which is being reverse engineered, as the group it will be in. This is convenient if you already have categorized tables/views in schemas, like which is the case in AdventureWorks. Of course this can be switched off, or corrected on the fly. When reverse engineering, we'll walk through a wizard which will guide us with the selection of the elements which relational model data should be retrieved, which we can later on use to reverse engineer to an entity model. The first step after specifying which database server connect to is to select these elements. below we can see the AdventureWorks catalog as well as the different schemas it contains. We'll include all of them. After the wizard completes, we have all relational model data nicely in our catalog data, with schemas. So let's reverse engineer entities from the tables in these schemas. We select in the catalog explorer the schemas 'HumanResources', 'Person', 'Production', 'Purchasing' and 'Sales', then right-click one of them and from the context menu, we select Reverse engineer Tables to Entity Definitions.... This will bring up the dialog below. We check all checkboxes in one go by checking the checkbox at the top to mark them all to be added to the project. As you can see LLBLGen Pro has already filled in the group name based on the schema name, as this is the default and we didn't change the setting. If you want, you can select multiple rows at once and set the group name to something else using the controls on the dialog. We're fine with the group names chosen so we'll simply click Add to Project. This gives the following result: (I collapsed the other groups to keep the picture small ;)). As you can see, the entities are now grouped. Just to see how dense this model is, I've expanded the relationships of Employee: As you can see, it has relationships with entities from three other groups than HumanResources. It's not doable to cut up this project into sub-models without duplicating the Employee entity in all those groups, so this model is better suited to be used as a single model resulting in a single code base, however it benefits greatly from having its entities grouped into separate groups at the project level, to make work done on the model easier. Now let's look at another situation, namely where we work with a single database while we want to have multiple models and for each model a separate code base. Situation two: grouping entities in separate models within the same project. To get rid of the entities to see the second situation in action, simply undo the reverse engineering action in the project. We still have the AdventureWorks relational model data in the catalog. To switch LLBLGen Pro to see each group in the project as a separate project, open the Project Settings, navigate to General and set Group usage to AsSeparateProjects. In the catalog explorer, select Person and Production, right-click them and select again Reverse engineer Tables to Entities.... Again check the checkbox at the top to mark all entities to be added and click Add to Project. We get two groups, as expected, however this time the groups are seen as separate projects. This means that the validation logic inside LLBLGen Pro will see it as an error if there's e.g. a relationship or an inheritance edge linking two groups together, as that would lead to a cyclic reference in the code bases. To see this variant of the grouping feature, seeing the groups as separate projects, in action, we'll generate code from the project with the two groups we just created: select from the main menu: Project -> Generate Source-code... (or press F7 ;)). In the dialog popping up, select the target .NET framework you want to use, the template preset, fill in a destination folder and click Start Generator (normal). This will start the code generator process. As expected the code generator has simply generated two code bases, one for Person and one for Production: The group name is used inside the namespace for the different elements. This allows you to add both code bases to a single solution and use them together in a different project without problems. Below is a snippet from the code file of a generated entity class. //... using System.Xml.Serialization; using AdventureWorks.Person; using AdventureWorks.Person.HelperClasses; using AdventureWorks.Person.FactoryClasses; using AdventureWorks.Person.RelationClasses; using SD.LLBLGen.Pro.ORMSupportClasses; namespace AdventureWorks.Person.EntityClasses { //... /// <summary>Entity class which represents the entity 'Address'.<br/><br/></summary> [Serializable] public partial class AddressEntity : CommonEntityBase //... The advantage of this is that you can have two code bases and work with them separately, yet have a single target database and maintain everything in a single location. If you decide to move to a single code base, you can do so with a change of one setting. It's also useful if you want to keep the groups as separate models (and code bases) yet want to add relationships to elements from another group using a copy of the entity: you can simply reverse engineer the target table to a new entity into a different group, effectively making a copy of the entity. As there's a single target database, changes made to that database are reflected in both models which makes maintenance easier than when you'd have a separate project for each group, with its own relational model data. Conclusion LLBLGen Pro offers a flexible way to work with entities in sub-models and control how the sub-models end up in the generated code.

Read the article

Trying to run my code and compiler seems to just close after it executes [migrated]

- by Shane

I am trying to run a program and the compiler seems to just crash right after it executes ... i have no build errors so i am wondering what the hell is going on ... I am a bit of a novice so all help would be appreciated =). I don't know if you might have time to scan through the code but this is what i have got : using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Threading.Tasks; namespace ConsoleApplication1 { public class Student { string Fname, Lname, Program ; int Sid ; // Inputting information for students public void InputStudentInfo () { Console.WriteLine ("Please enter your first name") ; Fname = Console.ReadLine() ; Console.WriteLine ("Please enter you last name") ; Lname = Console.ReadLine() ; Console.WriteLine ("Please enter you student ID#") ; Sid = int.Parse(Console.ReadLine()) ; Console.WriteLine ("Enter the Program that you are completeing") ; Program = Console.ReadLine() ; } // Printing information for students public void PrintStudentInfo () { Console.Write (" Your name is " + Fname) ; Console.Write(" " + Lname); Console.WriteLine (" Your student identification number is " + Sid) ; Console.WriteLine (" The program you are registered for is " + Program) ; } /* public void MenuInterface() { Console.WriteLine (" 1. Input Student information" ) ; Console.WriteLine (" 2. Input Course information" ) ; Console.WriteLine (" 3. Input Grade information" ) ; Console.WriteLine (" 4. Print Course information" ) ; Console.WriteLine (" 5. Print Student information" ) ; Console.WriteLine (" 6. Print Grade information" ) ; Console.WriteLine (" 7. Print Student information including Course they are registered in and the grade obtained for that course" ) ; Console.WriteLine (" 8. Print grade info of the course in which student has achieved the highest grade" ) ; Console.WriteLine (" 0. Exit") ; Console.WriteLine (" Please select a choice from 0-8") ; accode = Console.ReadLine(); } */ } public class Course { string course1, course2, course3 ; int Stuid ; // Inputting Course Information public void InputCourseInfo () { Console.WriteLine (" Please re-enter your identification number") ; Stuid = int.Parse(Console.ReadLine()) ; Console.WriteLine (" Enter the name of your first course") ; course1 = Console.ReadLine() ; Console.WriteLine (" Enter the name of your second course") ; course2 = Console.ReadLine() ; Console.WriteLine (" Enter the name of your third course") ; course3 = Console.ReadLine() ; } // Printing Course Information public void PrintCourseInfo () { Console.WriteLine (" Your ID # is " + Stuid) ; Console.Write (" The Courses you selected are " + course1) ; Console.Write("," + course2); Console.Write(" and " + course3); } } public class Grade : Course { int Studentid ; int [] hwgrade ; int [] cwgrade ; int [] midegrade ; int [] finalegrade ; int [] totalgrade ; string coursename ; public Grade ( string cname , int Studentident , int [] homework , int [] classwork , int [] midexam , int [] finalexam) { coursename = cname ; Studentid = Studentident ; hwgrade = homework ; cwgrade = classwork ; midegrade = midexam ; finalegrade = finalexam ; } public string coname { get { return coursename ; } set { coursename = value ; } } public int Studentidenty { get { return Studentid ; } set { Studentid = value ; } } public void InputGradeInfo() { Console.WriteLine (" Please enter your Student ID" ) ; grade.Studentidenty = Console.ReadLine() ; for ( int i = 0; i < 3; i++) { Console.Writeline (" Please enter the Course name" ) ; grade.coname[i] = Console.Readline() ; Console.Writeline (" Please enter your homework grade") ; grade.hwgrade[i] = int.parse(Console.Readline()) ; // ..... } } public void CalcTotalGrade() { for (int i = 0; i < 3; i++) { grade.courseper[i] = (grade.hwgrade[i] + grade.cwgrade[i]) / 2; grade.finalper[i] = (grade.midexam[i] + grade.finalegrade[i]) / 2; grade.totalgrade[i] = (grade.courseper[i] + finalper[i]) / 2; } } public void PrintGradeInfo() { for ( int i = 0; i < 3; i++) { Console.Writeline (" Your homework grade is" + grade.hwgrade[i]) ; // ..... } } static void Main(string[] args) { int accode ; Student student = new Student() ; Course course = new Course() ; Grade grade = new Grade() ; do { Console.WriteLine(" 1. Input Student information"); Console.WriteLine(" 2. Input Course information"); Console.WriteLine(" 3. Input Grade information"); Console.WriteLine(" 4. Print Course information"); Console.WriteLine(" 5. Print Student information"); Console.WriteLine(" 6. Print Grade information"); Console.WriteLine(" 7. Print Student information including Course they are registered in and the grade obtained for that course"); Console.WriteLine(" 8. Print grade info of the course in which student has achieved the highest grade"); Console.WriteLine(" 0. Exit"); Console.WriteLine(" Please select a choice from 0-8"); accode = Console.ReadLine(); switch (accode) { case 1: student.InputStudentInfo(); break; case 2: course.InputCourseInfo(); break; case 3: grade.InputGradeInfo(); break; case 4: course.PrintCourseInfo(); break; case 5: student.PRintStudentInfo(); break; case 6: grade.PrintGradeInfo(); break; case 0: Console.WriteLine(" You have chosen to exit the program have a good day. =)"); break; } } while (accode != 0); Console.ReadKey(); } } }

Read the article

Observations in Migrating from JavaFX Script to JavaFX 2.0

- by user12608080

Observations in Migrating from JavaFX Script to JavaFX 2.0 Introduction Having been available for a few years now, there is a decent body of work written for JavaFX using the JavaFX Script language. With the general availability announcement of JavaFX 2.0 Beta, the natural question arises about converting the legacy code over to the new JavaFX 2.0 platform. This article reflects on some of the observations encountered while porting source code over from JavaFX Script to the new JavaFX API paradigm. The Application The program chosen for migration is an implementation of the Sudoku game and serves as a reference application for the book JavaFX – Developing Rich Internet Applications. The design of the program can be divided into two major components: (1) A user interface (ideally suited for JavaFX design) and (2) the puzzle generator. For the context of this article, our primary interest lies in the user interface. The puzzle generator code was lifted from a sourceforge.net project and is written entirely in Java. Regardless which version of the UI we choose (JavaFX Script vs. JavaFX 2.0), no code changes were required for the puzzle generator code. The original user interface for the JavaFX Sudoku application was written exclusively in JavaFX Script, and as such is a suitable candidate to convert over to the new JavaFX 2.0 model. However, a few notable points are worth mentioning about this program. First off, it was written in the JavaFX 1.1 timeframe, where certain capabilities of the JavaFX framework were as of yet unavailable. Citing two examples, this program creates many of its own UI controls from scratch because the built-in controls were yet to be introduced. In addition, layout of graphical nodes is done in a very manual manner, again because much of the automatic layout capabilities were in flux at the time. It is worth considering that this program was written at a time when most of us were just coming up to speed on this technology. One would think that having the opportunity to recreate this application anew, it would look a lot different from the current version. Comparing the Size of the Source Code An attempt was made to convert each of the original UI JavaFX Script source files (suffixed with .fx) over to a Java counterpart. Due to language feature differences, there are a small number of source files which only exist in one version or the other. The table below summarizes the size of each of the source files. JavaFX Script source file Number of Lines Number of Character JavaFX 2.0 Java source file Number of Lines Number of Characters ArrowKey.java 6 72 Board.fx 221 6831 Board.java 205 6508 BoardNode.fx 446 16054 BoardNode.java 723 29356 ChooseNumberNode.fx 168 5267 ChooseNumberNode.java 302 10235 CloseButtonNode.fx 115 3408 CloseButton.java 99 2883 ParentWithKeyTraversal.java 111 3276 FunctionPtr.java 6 80 Globals.java 20 554 Grouping.fx 8 140 HowToPlayNode.fx 121 3632 HowToPlayNode.java 136 4849 IconButtonNode.fx 196 5748 IconButtonNode.java 183 5865 Main.fx 98 3466 Main.java 64 2118 SliderNode.fx 288 10349 SliderNode.java 350 13048 Space.fx 78 1696 Space.java 106 2095 SpaceNode.fx 227 6703 SpaceNode.java 220 6861 TraversalHelper.fx 111 3095 Total 2,077 79,127 2531 87,800 A few notes about this table are in order: The number of lines in each file was determined by running the Unix ‘wc –l’ command over each file. The number of characters in each file was determined by running the Unix ‘ls –l’ command over each file. The examination of the code could certainly be much more rigorous. No standard formatting was performed on these files. All comments however were deleted. There was a certain expectation that the new Java version would require more lines of code than the original JavaFX script version. As evidenced by a count of the total number of lines, the Java version has about 22% more lines than its FX Script counterpart. Furthermore, there was an additional expectation that the Java version would be more verbose in terms of the total number of characters. In fact the preceding data shows that on average the Java source files contain fewer characters per line than the FX files. But that's not the whole story. Upon further examination, the FX Script source files had a disproportionate number of blank characters. Why? Because of the nature of how one develops JavaFX Script code. The object literal dominates FX Script code. Its not uncommon to see object literals indented halfway across the page, consuming lots of meaningless space characters. RAM consumption Not the most scientific analysis, memory usage for the application was examined on a Windows Vista system by running the Windows Task Manager and viewing how much memory was being consumed by the Sudoku version in question. Roughly speaking, the FX script version, after startup, had a RAM footprint of about 90MB and remained pretty much the same size. The Java version started out at about 55MB and maintained that size throughout its execution. What About Binding? Arguably, the most striking observation about the conversion from JavaFX Script to JavaFX 2.0 concerned the need for data synchronization, or lack thereof. In JavaFX Script, the primary means to synchronize data is via the bind expression (using the “bind” keyword), and perhaps to a lesser extent it’s “on replace” cousin. The bind keyword does not exist in Java, so for JavaFX 2.0 a Data Binding API has been introduced as a replacement. To give a feel for the difference between the two versions of the Sudoku program, the table that follows indicates how many binds were required for each source file. For JavaFX Script files, this was ascertained by simply counting the number of occurrences of the bind keyword. As can be seen, binding had been used frequently in the JavaFX Script version (and does not take into consideration an additional half dozen or so “on replace” triggers). The JavaFX 2.0 program achieves the same functionality as the original JavaFX Script version, yet the equivalent of binding was only needed twice throughout the Java version of the source code. JavaFX Script source file Number of Binds JavaFX Next Java source file Number of “Binds” ArrowKey.java 0 Board.fx 1 Board.java 0 BoardNode.fx 7 BoardNode.java 0 ChooseNumberNode.fx 11 ChooseNumberNode.java 0 CloseButtonNode.fx 6 CloseButton.java 0 CustomNodeWithKeyTraversal.java 0 FunctionPtr.java 0 Globals.java 0 Grouping.fx 0 HowToPlayNode.fx 7 HowToPlayNode.java 0 IconButtonNode.fx 9 IconButtonNode.java 0 Main.fx 1 Main.java 0 Main_Mobile.fx 1 SliderNode.fx 6 SliderNode.java 1 Space.fx 0 Space.java 0 SpaceNode.fx 9 SpaceNode.java 1 TraversalHelper.fx 0 Total 58 2 Conclusions As the JavaFX 2.0 technology is so new, and experience with the platform is the same, it is possible and indeed probable that some of the observations noted in the preceding article may not apply across other attempts at migrating applications. That being said, this first experience indicates that the migrated Java code will likely be larger, though not extensively so, than the original Java FX Script source. Furthermore, although very important, it appears that the requirements for data synchronization via binding, may be significantly less with the new platform.

Read the article

SQL SERVER – A Quick Look at Logging and Ideas around Logging

- by pinaldave

This blog post is written in response to the T-SQL Tuesday post on Logging. When someone talks about logging, personally I get lots of ideas about it. I have seen logging as a very generic term. Let me ask you this question first before I continue writing about logging. What is the first thing comes to your mind when you hear word “Logging”? Now ask the same question to the guy standing next to you. I am pretty confident that you will get a different answer from different people. I decided to do this activity and asked 5 SQL Server person the same question. Question: What is the first thing comes to your mind when you hear the word “Logging”? Strange enough I got a different answer every single time. Let me just list what answer I got from my friends. Let us go over them one by one. Output Clause The very first person replied output clause. Pretty interesting answer to start with. I see what exactly he was thinking. SQL Server 2005 has introduced a new OUTPUT clause. OUTPUT clause has access to inserted and deleted tables (virtual tables) just like triggers. OUTPUT clause can be used to return values to client clause. OUTPUT clause can be used with INSERT, UPDATE, or DELETE to identify the actual rows affected by these statements. Here are some references for Output Clause: OUTPUT Clause Example and Explanation with INSERT, UPDATE, DELETE Reasons for Using Output Clause – Quiz Tips from the SQL Joes 2 Pros Development Series – Output Clause in Simple Examples Error Logs I was expecting someone to mention Error logs when it is about logging. The error log is the most looked place when there is any error either with the application or there is an error with the operating system. I have kept the policy to check my server’s error log every day. The reason is simple – enough time in my career I have figured out that when I am looking at error logs I find something which I was not expecting. There are cases, when I noticed errors in the error log and I fixed them before end user notices it. Other common practices I always tell my DBA friends to do is that when any error happens they should find relevant entries in the error logs and document the same. It is quite possible that they will see the same error in the error log and able to fix the error based on the knowledge base which they have created. There can be many different kinds of error log files exists in SQL Server as well – 1) SQL Server Error Logs 2) Windows Event Log 3) SQL Server Agent Log 4) SQL Server Profile Log 5) SQL Server Setup Log etc. Here are some references for Error Logs: Recycle Error Log – Create New Log file without Server Restart SQL Error Messages Change Data Capture I got surprised with this answer. I think more than the answer I was surprised by the person who had answered me this one. I always thought he was expert in HTML, JavaScript but I guess, one should never assume about others. Indeed one of the cool logging feature is Change Data Capture. Change Data Capture records INSERTs, UPDATEs, and DELETEs applied to SQL Server tables, and makes a record available of what changed, where, and when, in simple relational ‘change tables’ rather than in an esoteric chopped salad of XML. These change tables contain columns that reflect the column structure of the source table you have chosen to track, along with the metadata needed to understand the changes that have been made. Here are some references for Change Data Capture: Introduction to Change Data Capture (CDC) in SQL Server 2008 Tuning the Performance of Change Data Capture in SQL Server 2008 Download Script of Change Data Capture (CDC) CDC and TRUNCATE – Cannot truncate table because it is published for replication or enabled for Change Data Capture Dynamic Management View (DMV) I like this answer. If asked I would have not come up with DMV right away but in the spirit of the original question, I think DMV does log the data. DMV logs or stores or records the various data and activity on the SQL Server. Dynamic management views return server state information that can be used to monitor the health of a server instance, diagnose problems, and tune performance. One can get plethero of information from DMVs – High Availability Status, Query Executions Details, SQL Server Resources Status etc. Here are some references for Dynamic Management View (DMV): SQL SERVER – Denali – DMV Enhancement – sys.dm_exec_query_stats – New Columns DMV – sys.dm_os_windows_info – Information about Operating System DMV – sys.dm_os_wait_stats Explanation – Wait Type – Day 3 of 28 DMV sys.dm_exec_describe_first_result_set_for_object – Describes the First Result Metadata for the Module Transaction Log Impact Detection Using DMV – dm_tran_database_transactions Log Files I almost flipped with this final answer from my friend. This should be probably the first answer. Yes, indeed log file logs the SQL Server activities. One can write infinite things about log file. SQL Server uses log file with the extension .ldf to manage transactions and maintain database integrity. Log file ensures that valid data is written out to database and system is in a consistent state. Log files are extremely useful in case of the database failures as with the help of full backup file database can be brought in the desired state (point in time recovery is also possible). SQL Server database has three recovery models – 1) Simple, 2) Full and 3) Bulk Logged. Each of the model uses the .ldf file for performing various activities. It is very important to take the backup of the log files (along with full backup) as one never knows when backup of the log file come into the action and save the day! How to Stop Growing Log File Too Big Reduce the Virtual Log Files (VLFs) from LDF file Log File Growing for Model Database – model Database Log File Grew Too Big master Database Log File Grew Too Big SHRINKFILE and TRUNCATE Log File in SQL Server 2008 Can I just say I loved this month’s T-SQL Tuesday Question. It really provoked very interesting conversation around me. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Optimization, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Search Results

Search found 1302 results on 53 pages for 'chosen'.

Page 45/53 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52 | Next Page >

- by Pete

- by pojo

- by Phillip Gibson

- by whichhand

- by Matt Dawdy

- by Larry

- by bstullkid

- by Noldorin

- by BrainSteel

- by julien

- by Michiel Peeters

- by Skillman

- by dfo

- by Asian Angel

- by jehan

- by cj

- by DigitalGeekery

- by extended_events

- by Compudicted

- by Mark Virtue

- by Mark Virtue

- by FransBouma

- by Shane

- by user12608080

- by pinaldave

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52 | Next Page >