Search Results

Search found 16987 results on 680 pages for 'second'.

Page 450/680 | < Previous Page | 446 447 448 449 450 451 452 453 454 455 456 457  | Next Page >

  • Compaq R4000 laptop randomly locking up

    - by Josh
    I have a Compaq R4000 laptop with 2GB of RAM, running Ubuntu Linux 9.10. It is randomly locking up on me, approximately once every two days. I have a second partition with Windows XP Home installed, and I have had the system lock up in XP as well, meaning I believe this is a hardware issue. I have run two passes of Memtest86+ with no errors. The system has a fan that has died, so I initially suspected overheating. However the system just locked up on me while I was in the middle of typing a script to warn me / shut down if the temperature was too high. When the lockup happened the temperature was 88°F, so I am now starting to believe that may not be the issue. When the system locks up, I cannot SSH in nor ping it. Nothing shows in syslog when I reboot. I have configured it to send syslog messages to a local server as well and no messages appear on that server when the lockup happens. I am open to any and all advice!

    Read the article

  • Nagios NTP, discarding peer

    - by picca
    We're using nagios *check_ntp_time* for monitoring time on our servers. Unfortunately the service is flapping. And reporting a lot of false-positives. It happens everytime for random server in random day time and lasts for ~10-30 minutes. When the problem occurs we get: watch01:~ # /usr/lib/nagios/plugins/check_ntp_time -H lb01 -w 1 -c 2 -v sending request to peer 0 response from peer 0: offset 0.07509887218 sending request to peer 0 response from peer 0: offset 0.07508444786 sending request to peer 0 response from peer 0: offset 0.07499825954 sending request to peer 0 response from peer 0: offset 0.07510817051 discarding peer 0: stratum=0 overall average offset: 0 NTP CRITICAL: Offset unknown| When everything is ok, we get (I used different server to not have to wait): watch01:~ # /usr/lib/nagios/plugins/check_ntp_time -H web02 -w 1 -c 2 -v sending request to peer 0 response from peer 0: offset 0.0002282857895 sending request to peer 0 response from peer 0: offset 0.0002194643021 sending request to peer 0 response from peer 0: offset 0.0002347230911 sending request to peer 0 response from peer 0: offset 0.0002293586731 overall average offset: 0.0002282857895 NTP OK: Offset 0.0002282857895 secs|offset=0.000228s;1.000000;2.000000; We are using: check_ntp_time v1.4.15 (nagios-plugins 1.4.15) on Debian squeeze. Remote ntp daemon is: ntpd - NTP daemon program - Ver. 4.2.4p4 I already found some forums where the problem is described: 1, 2, 3. Every time they edvise to upgrade nagios-plugins, because in version prior to 1.4.13 there was a bug with inserted leap second. But we have already newer version of nagios-plugins.

    Read the article

  • Parallel port blocking

    - by asalamon74
    I have a legacy Java program which handles a special card printer by sending binary data to the LPT1 port (no printer driver is involved, the Java program creates the binary stream). The program was working correctly with the client's old computer. The Java program sent all the bytes to the printer and after sending the last byte the program was not blocked. It took an other minute to finish the card printing, but the user was able to continue the work with the program. After changing the client's computer (but not the printer, or the Java program), the program does not finish the task till the card is ready, it is blocked until the last second. It seems to me that LPT1 has a different behavior now than was before. Is it possible to change this in Windows? I've checked BIOS for parallel port settings: The parallel port is set to EPP+ECP (but also tried the other two options: Bidirectional, Output only). Maybe some kind of parallel port buffer is too small? How can I increase it?

    Read the article

  • htaccess not properly rewriting urls

    - by Cameron Ball
    This is a bit of a weird one. I'm doing some work on a server, and I need rewrite rules for directories that actually exist (in some cases, they are more than one level deep) At the moment my .htaccess looks like this: RewriteEngine on RewriteRule ^simfiles/([-\ a-zA-Z0-9:/]+)$ http://mydomain.com/?portal=simfiles&folder=$1 [L] And this is working OK, for example, a url like: mydomain.com/sifmiles/my-files Will get redirected to mydomain.com/?portal=simfiles&folder=my-files Or in the case of a directory structure that is deeper than one level: mydomain.com/sifmiles/my-files/more-of-my-files Will get redirected to mydomain.com/?portal=simfiles&folder=my-files/more-of-my-files I wrote the regex so that it won't match things with a . in the path, because there are css and js files which reside in simfiles/somedirectory, and if I redirect everything then these cannot be loaded. I tried a configuration like this: RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^simfiles/([-\ a-zA-Z0-9:/\.]+)$ http://mydomain.com/?portal=simfiles&folder=$1 [L] But that doesn't work, things still don't load properly. So my first question is, how can I achieve this "properly"? I don't like my solution because it means redirects won't occur if the folder has a . in its name. My second problem, is that while the redirection is happening properly, the url becomes: http://mydomain.com/?portal=simfiles&folder=my-files I want the URL to remain clean, like: http://mydomain.com/sifmiles/my-files How can I achieve this?

    Read the article

  • Get details / solve issue with a kernel panic?

    - by Joseph
    I have a Lenovo T430 running Linux Mint 13 (MATE): joseph:~$ uname -a Linux joseph-T430-LM 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I installed Mint immediately after getting the laptop about two weeks ago, and have noticed that about once a day, the computer will completely freeze up- I can't use Ctrl+Alt+Backspace to restart X, I can't use Ctrl+Alt+F1 to get a text only terminal, can't move mouse, can't type, and if any music was playing it just gets stuck in about a 1-second loop. There is a Windows partition, but I haven't had any issues in Windows. I couldn't find a common thread between the freezes, they were seemingly random (sometimes right after I clicked the mouse, sometimes not; sometimes with Pandora/flash being used, sometimes not, etc). I assume they're kernel panics since it completely locks up, but the laptop doesn't have a capslock or scroll lock LED. It is on a dock and I do have a USB keyboard, but the scroll lock/capslock lights do not flash when it happens (not sure if this is indicating its not a kernel panic, or if the kernel panic just wouldn't illuminate the LEDs on a usb keyboard attached to a laptop dock). This was annoying but not terrible. However, I've found a way to reproduce it. I have a particular CSV file that when I open up in LibreOffice Calc and scroll around, the same thing happens- complete lock up. I really need to use this file, so I'd like to fix the issue, but at the least it's given me a test case to work with. So, having a case where I can cause this issue, what can I do to better find out what's going on? I've looked in /var/log/syslog but haven't found anything seemingly useful. Any thoughts?

    Read the article

  • SQL Server 2008 cluster freezing

    - by Ed Leighton-Dick
    We have run into a strange situation in which a SQL Server 2008 single-node cluster hangs. As background, we are rebuilding a Windows Server 2003/SQL Server 2005 two-node cluster using Windows 2008 and SQL Server 2008. Here's the timeline: Evicted the passive node (server B) from the Windows 2003/SQL 2005 cluster. The active node now functions as a single-node cluster with no problems. Wiped server B's disks and installed Windows 2008 and SQL Server 2008 as a single-node cluster. Since we do not want to the two clusters to communicate yet, we left the cluster's private network "heartbeat" adapter unconfigured. The cluster comes up and functions normally. Moved all databases to the new cluster. Cluster continues to function normally. Turned off server A (old cluster) in preparation for rebuilding as the second node of the new cluster. SQL Server instance on server B (new cluster) locks up, even though it should have no knowledge of or interaction with server A. Restarted server A. SQL Server instance on server B (new cluster) immediately begins working again. Things we have tried: The new cluster's name responds to ping and NETBIOS requests, even while the SQL Server is hung. We have confirmed that no IP address is assigned to the old heartbeat adapter, and it is not pulling an IP address from DHCP. Disabling the heartbeat's network card has the same effect. No errors were generated in any logs - Windows or SQL. When the error first occurred, it sat in the hung state for quite some time (well over 10 minutes) before anyone figured out what was going on. This would seem to eliminate any sort of normal cluster timeout in which it would have been searching for the other node (even if one had been configured). Server B is running Windows 2008 SP2, fully patched, and SQL Server 2008 SP1 CU7 (10.0.2775).

    Read the article

  • Weird routing issue

    - by Joel Coel
    I'm having some weird internet problems on campus. I know it's something simple, but it's a case where I need another set of eyes. I think I can explain the problem best by posting a tracert: Tracing route to google.com [74.125.45.147] over a maximum of 30 hops: 1 3 ms 3 ms 3 ms 192.168.8.1 2 1 ms 1 ms 1 ms elissaemily-pc.york.edu [192.168.10.5] 3 2 ms 2 ms 2 ms rrcs-76-79-19-33.west.biz.rr.com [76.79.19.33] 4 31 ms 3 ms 2 ms ge-1-1-0.lnclne00-mx41.neb.rr.com [76.85.220.109] 5 20 ms 17 ms 17 ms ge-7-3-0.chcgill3-rtr1.kc.rr.com [76.85.220.137] 6 20 ms 20 ms 19 ms ae-5-0.cr0.chi30.tbone.rr.com [66.109.6.112] 7 19 ms 19 ms 24 ms ae-1-0.pr0.chi10.tbone.rr.com [66.109.6.155] 8 26 ms 24 ms 24 ms 74.125.48.109 9 23 ms 24 ms 21 ms 216.239.46.246 10 39 ms 39 ms 55 ms 209.85.242.215 11 39 ms 39 ms 39 ms 209.85.254.243 12 39 ms 40 ms 96 ms 209.85.253.145 13 39 ms 39 ms 39 ms yx-in-f147.1e100.net [74.125.45.147] Trace complete. Note the second entry in there. Not only is the host name a student's computer, but the ip address doesn't exist. Dhcp shows that host as having a different address and you can't ping any 192.168.10.5. Yet somehow it's routing packets for us (and not very well, either — things are slow right now). The basic network routing table looks like this: Destination Subnet Mask Gateway --------------------------------------- Default Route -- 10.1.1.5 (our firewall) 10.0.0.0 255.0.0.0 -- 192.168.8.0 255.255.252.0 --

    Read the article

  • Intel z77 vs h77 for intensive compiling, gaming [closed]

    - by Bilal Akhtar
    I'm in the market for a desktop motherboard (preferably ATX) that functions well with Intel i7-3770 Ivy Bridge processor at 3.4 GHz with LGA1155 socket. That processor is very fast, and it should handle all my tasks. My question is about the type of motherboard chipset I should choose to accompany it. I plan to use my rig for compiling and developing Debian package and other OS components, web development, occasional Android apps, chroots, VMs, FlightGear, other gaming but nothing serious, and heavy multitasking, all on Ubuntu. I do NOT plan to overclock, and I never will, so that's not a cause of concern for me. That said, I'm down to three chipset choices: Intel H77 Intel Z68 Intel Z77 I'm planning to go for H77 since I don't need any of the new features in Z77. I don't plan to use a second GPU and I will never overclock my CPU/GPU. My question is, will H77 based MoBos handle all my tasks well? Intel advertises that chipset as "everyday computing" but other sites say it's base functionality is the same as Z77. Intel rather advertises Z77 for "serious multitaskers, hardcore gamers and overclocking enthusiasts". But the problem with all Z77 motherboards I've seen is, they're way too expensive and their main feature seems to be overclocking, which won't be useful to me. Will I lose any raw CPU/GPU performance or HDD R/w with the H77 when comparing it to a Z77? Will heat, etc be an issue too? From what I've seen, Z77 motherboards have larger heat sinks when compared to H77 ones. Will that be an issue too, if I go with an H77 motherboard with no heat sinks for the chipset? The CPU will have a fan in both cases, of course. tl;dr When it comes to CPU/GPU performance and HDD r/w, is the Intel H77 chipset slower than the Z77? I don't care about overclocking or multiple GPUs, and for the processor, I'm set on Ivy Bridge i7-3770.

    Read the article

  • multiple folder structures/views

    - by Sojourner
    Newbie. Setting up a server for a law firm. Want to set up the folder structure as follows: Client 1 Name -- Matter 1 (i.e. setting up corporation) -- Matter 2 (i.e. divorce) -- Matter 3 (i.e. setting up trust) Client 2 Name -- Matter 1 Client 3 Name -- Matter 1 and so on. But the attorneys prefer navigating a folder structure, more based on what case type: Civil -- Client 1 Name (i.e. Smythe) -- Client 2 Name (i.e. Jones) -- Client 3 Name (i.e. Johson) -- Landlord/Tenant -- Client 1 Name (i.e. Jones) -- Client 2 Name (i.e. Johson) -- Class Action Suits -- Suit 1 -- Suit 2 Personal Injury -- Client 1 Name -- Client 2 Name -- Client 3 Name Criminal -- Client 1 Name (i.e. Smythe) I'd like to know if it's possible to set up the server with the first folder structure (it's more organized and easier to employ scripts), while having the second folder structure available for users who find it easier to deal with the same types of cases grouped together.

    Read the article

  • Symbolic directory link shared in domain

    - by Sabre
    We have a file server that is 2008R2 STD, it is a member server in a 2008 AD. I need to relocate some of the files and directories and would like to do it behind the scenes more or less without impacting the users. (Reason for this is that some of the files, due to recent software changes, HAVE to be located locally on one of the workstations, but they can be accessed by other applications remotely.) So symbolic links seem the panacea here, I moved a directory to another network share in the same domain (Windows 7 professional), created a symlink to it in the location it used to be in, named it the same thing, and to the local user it seems almost transparent. I.E. When logged into the desktop of the file server, I can go to the directory, open the link, it leaps to the other share as if it were local, exactly what would be expected. Then I tried it from another client computer (Windows 7 professional as well), went through the normal provisioning of R2R and L2R with fsutil... No joy. What I am getting is an access denied "Logon failure: Unknown username or bad password." using the same account that I log on locally to the file server with (Which happens to be the domain admin) So I cannot believe it is telling the truth, or... I assume it is not passing the credentials I am connecting to the first share all the way through the symlink. The end result is I want users on the domain to browser to share A, inside share A is a mixture of directories/files that reside there, and symlinks to directories/files on the second machine over the network in the same domain. Possible? Or am I misunderstanding how the symlink should work?

    Read the article

  • Windows 2008 Standard upgrade to Windows 2008 Enterprise failure

    - by Archit Baweja
    Sidestory, I was in the process of setting up a second Exchange 2010 server for DAG support, when I realized that my box needed Windows 2008 Enterprise edition. The box currently has Windows 2008 Standard Windows update including SP2 Exchange 2010 with CAS, HT, Mailbox roles Domain Services role File Services role. When I try to upgrade to Windows 2008 Enterprise, I initially got a "your current version of windows is more recent than the intallation media", something to that effect. My first guess was it may be SP2 related, so I uninstalled SP2, restarted and tried again. This time it gave me an error to the effect Windows could not configure one or more windows components. Please restart and try the update again. This was at the last stage of the Windows 2008 Enterprise install when it says "Completing installation". So I removed Domain Services role (including demoting it as a DC). However I get the same error again. Anyone see something like this before and have any suggestions? Also , is there a log file the windows upgrade program spits out that I can consult to see what component exactly is interfering? Update 1 Based on some googling I finally found the setup log file, and it seems that Windows setup had an issue determining the .Net 3.0 "feature" being installed or uninstalled. So based of of a win7/vista technet article I'm going to retry the upgrade after removing the .Net 3.0 feature.

    Read the article

  • mysql mass insert data

    - by user12145
    Edit: I realized that if I construct a large query in memory, the speed has increased almost 10 times of magnitude "insert ignore into xxx(col1, col2) values('a',1), values('b',1), values('c',1)..." Edit: since I have an index on the first column, the insert time creeps up as I insert more. Can I delay the index until the end? Original: I'm using the following to batch insert 10 million rows into mysql db(not all at once, since they don't all fit into memory), it's too slow(taking many hours). should I use load file to improve performance? I would have to create a second file to store all the 10 million rows, then load that into db. are there better ways? PreparedStatement st=con.prepareStatement("insert ignore into xxx (col1, col2) "+ " values (?, 1)"); Iterator d=data.iterator(); while(d.hasNext()){ st.clearParameters(); st.setString(1, (d.next()).toLowerCase()); st.addBatch(); } int[]updateCounts=st.executeBatch();

    Read the article

  • Is there any way to customize the Windows 7 taskbar auto-hide behavior? Delay activation? Timer?

    - by calbar
    I'm becoming increasingly frustrated with the way Windows 7 handles showing a hidden taskbar. It's incredibly over-eager to pop out and obscure what I'm really trying to interact with, requiring me to move the mouse away, wait for it to auto-hide again, then resume what I was doing but more deliberately. After closely examining the behavior, it appears that a hidden taskbar "peeks out" from the edge by 2 or 3 pixels, and slowly moving your mouse into this area activates it; you don't even need to touch the edge of the screen. I would love it if there was a way to customize or change this behavior. Ideally, the taskbar would only pop out if you are actively "pushing" the edge of the screen it is hidden on. So activation only occurs once you've reached the screens edge and continue to move the mouse past a customizable threshold. Alternatively, a simple activation delay would suffice as well. So only if the mouse remains in that 2-3 pixel area (a.k.a. on the taskbar) for greater than a customizable amount of time does it pop out again. This would only be a fraction of a second. Often times the cursor simply "careens" off the edge of the screen while trying to focus on something nearby. Anyway, if there are any registry settings or utilities that can achieve either of these effects, that would be great! Thanks for your help.

    Read the article

  • Cannot set up dual monitors correctly in Fedora15 with KDE.

    - by adivasile
    I have 2 monitors: 24" LCD connected via DVI(primary) 19" LCD connected via VGA(secondary) Everytime Fedora starts the second display is always set to clone the first one and they both run at 1280x1024 and I always have to disable the 19" monitor, in order for the bigger one to run at 1920x1080. I want to set them up so that my secondary monitor extends the primary one.The problem is that no matter what kind of configuration I choose it has no effect.My secondary monitor remains disabled. I've tried using both the Display manager from KDE and the ATI Control Panel and the behaviour is always the same.The moment I click apply, the screen flickers and nothing changes. I've succesfully used the extended setup in Fedora15 with Gnome3. I have a RadeonHD 4300 series videocard and I'm using the drivers downloaded from the AMD site. This is the output of xrandr -q : Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1920 VGA-0 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1024x768 75.0 70.1 66.0 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 66.7 59.9 720x400 70.1 DVI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 60.0 1680x1050 59.9 1600x900 60.0 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1280x720 60.0 1152x720 60.0 1024x768 75.0 60.0 832x624 74.6 800x600 75.0 60.3 640x480 75.0 59.9 720x400 70.1 Later edit: The problem seems to come from the ATI drivers.I managed to set up the monitors like I wanted after I uninstalled the drivers. Unfortunately I'm working on an OpenCL project so I had to reinstall them.The moment I did that, all my previous settings were forgotten and I was back to square one.

    Read the article

  • DFSR NTFS Permissions Not Working!??!

    - by megadood
    I have two windwos 2008 standard servers running DFSR okay. I can create a file on one server, it is replicated to the other okay etc. I have the namespace shared folder on each server shared with full control administrators / everyone change/read permissions. I then browse to the folder on server 1 e.g.\server1\namespace\share\folder1. I right click the folder, and configure the NTFS permissions as I would like for example Adminsitrators Full Control / One User Read/Write Access / No other users in the user list. I save this and then double check the second server e.g. \server2\namespace\share\folder1. I right click the same folder name as before and can see the NTFS permissions have replicated accordingly. I right click the folder and go to properties - security - advanced - effective permissions and select a user that shouldnt be able to get into that folder e.g. testuser. It agrees with the NTFS permissions and shows that testuser has no ticks next to any permissions so should be denied access. I logon to any network PC or the server as testuser. Browse to \server1\namespace\share\folder1. It lets me straight in, no access denied messages. The same applies to server2. It seems as thought all my NTFS permissions are being ignored. I have 1 DFS share and then all the subfolders are a mixture of private folders and public folders so need the NTFS permissions to work ideally. Any idea whats going on? Is this normal? From my tests all users can access any DFSR folder under the namespace\share which is quite worrying. Thanks

    Read the article

  • Configuring apache and php to handle many connections

    - by Marc
    My preliminary setup is like this. Two QuadCore 8GB servers running debian 6, with php and apache, One QuadCore 16GB server running debian 6, with mysql My plan is to have one 8Gb server to act as a proxy server, using vertx java to handle connections. I will let vertx use HttpClient to send web requests to the second 8GB server. This would have apache installed and use php to deliver any information that it gets from the mysql server on the third, 16GB server. The main reason I want this setup is to have things separated, so the "proxy" will be the only way to access the system, as the other two server will only be reachable from the local network. I can have the vertx proxy handle 5000+ concurrent connections, but, I don't know how to configure apache to handle all the requests coming from the proxy. Php will connect over mysqli with persistent connection pool of 500-800 connections, the mysql server seems not to have any issues on this part. In previous projects, the apache part was always causing issues, no matter how I set it up. I might not fully understand how to setup apache, since normally apache should handle many concurrent connections, but it does seem to now.

    Read the article

  • Is it possible to rate limit based on host headers? i.e. not just on ip address

    - by Blankman
    I have a web service endpoint that I am building where people will post an xml file to, and it will really get pounded with over 1K requests per second. Now they are sending in these xml files via http post, but a good majority of them will be rate limited. The problem is, the rate limiting will be done by the web application by looking up the source_id in the xml, and if it is over x requests per minute, it will not be processed further. I was wondering if I could do rate limit checking earlier in the processing somehow and thus save the 50K file going threw the pipeline to my web servers and eating up resources. Could a load balancer make a call out to verify rate usage somehow? If this is possible, I could maybe put the source_id in a host header so even the XML file doesn't have to be parsed and loaded into memory. Is it possible to just look at host headers and not load up the entire 50K xml file into memory? I really appreciate your insights as this takes more knowledge of the entire tcp/ip stack etc.

    Read the article

  • Force SSL on one page via .htaccess without looping

    - by Will Martin
    Okay, I have this code: RewriteCond %{HTTPS} off RewriteCond %{REQUEST_URI} ^/borrowing/ill/request\.php$ RewriteRule ^.*$ https://%{HTTP_HOST}%{REQUEST_URI} [R,L] The way I would expect this to work is: A request for /borrowing/ill/request.php comes in on HTTP. The rule matches. The server redirects to HTTPS. The rule does not match, because HTTPS is now on. The way it actually works is: A request for /borrowing/ill/request.php comes in on HTTP. The rule matches. The server redirects to HTTPS. The rule matches. The server redirects to HTTPS. The rule matches. The server redirects to HTTPS ... And so on. I know that the second condition (matching the file name) is working, because the redirect loop only hits that specific page. The question is, why isn't the switch to HTTPS causing the first condition to not match? EDIT: I put the exact same .htaccess rules into a test area on another server -- same file and path info. And they worked just fine. There's got to be something wrong with the server configuration elsewhere.

    Read the article

  • Sort order in Windows Explorer

    - by Haim H.
    The behaviour described below occurs on Windows-7 systems and on Windows XP. We operate in a dual-language environment - English and Hebrew. When in Windows Explorer we sort files by name, the order in which they are listed is not what we would expect. Here is a list of file names as sorted by Windows Explorer (all of the files have a .pdf suffix): 1G110033H-PP 19C050G-PP-ORB 19C050H-PPRM 19C100H-PPRM 19C-MBPS-PP 19C-MBPS-PP-1 29AAC050-PP 29AAC100-PP 29AAC100-PPUL 29B004064-PP 101AC050-PP 101AC100-PP 101B100-PPE 1091003G-PPFSUL 10108033G-PPSA 10125033H-PPM It looks to me that first the items are sorted according to the position of the first alphabetic character in the name, and then, within those groups, they are sorted in "normal" alpha-numeric order. That is, all the files with an alpha character in the first position are on top of the list, followed by those with the first alpha character in the second position, followed by those with the first alpha character in the third position, and so on. An alternate way of looking at this is that, in a file name composed of numbers and letters, the sort treats the first group of numbers in the name as the major sort node, with the rest of the name being the secondary sort node. Now that I understand the sequencing logic, it's not a big problem, but I was wondering why this happens?

    Read the article

  • Mountain Lion overheating issue have to do with launchd/Python?

    - by Christopher Jones
    So, Ever since I installed ML, my MacBook Air has been running SUPER hot. Opened up activity monitor, and everything seemed to be pretty normal, until I had it refresh every .5 seconds... and then I started seeing some interesting things. A 'Python' process appears and is terminated several times a second, and uses TONS of CPU 70-110. It's parent process is 'launchd' - and when I sample the process, there is a lot going on with Python. http://db.tt/ovuX3hZM These appear and disappear too quickly to get one... this one only happened to be using 70 ish percent of CPU... but they consistently hit 100-110%. http://db.tt/ovuX3hZMg The parent process... launchd. lots of context switches and UNIX system calls... What is the deal here? (photo goes here when I earn the street cred) The sample of launchd. ANY help here could be of help to not only me, but possibly many others experiencing decreased battery life and warmer laps these days because of this Mountain Lion weirdness. PLEASE HELP! PS - I'd put the screen grabs inline, but i don't have enough street cred yet.

    Read the article

  • special case ssh connection lag

    - by Hersheezy
    Setup We have a DMZ and LAN in our office that are connected to the outside with the following setup: +------+ | |------> LAN (normal office router) |Modem | | |------> DMZ (a single machine) +------+ Our internet account is with Comcast and we have 5 status IPs, one of which points to the single machine in the DMZ. Problem ssh connections initiated ANYWHERE EXCEPT the office LAN are really fast. However, from the LAN, there is about a 5 second delay. WTF?? Extra info The DMZ machine is debian 5. Executing a wget to the DMZ has no lag. When executing the following, everything up to HERE IS WHERE THE LAG IS INCURRED executes immediately. ssh -vvvv [email protected] ... debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug3: Wrote 16 bytes for a total of 1015 debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug3: Wrote 48 bytes for a total of 1063 debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/shopkins/.ssh/id_rsa (0x22440830) debug2: key: /home/shopkins/.ssh/identity ((nil)) debug2: key: /home/shopkins/.ssh/id_dsa ((nil)) debug3: Wrote 64 bytes for a total of 1127` HERE IS WHERE THE LAG IS INCURRED debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,gssapi,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering public key: /home/shopkins/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug3: Wrote 368 bytes for a total of 1495 debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/shopkins/.ssh/identity debug3: no such identity: /home/shopkins/.ssh/identity debug1: Trying private key: /home/shopkins/.ssh/id_dsa debug3: no such identity: /home/shopkins/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password:

    Read the article

  • Windows Remote Desktop (RDP/MSTSC) fails with Error Code: 5

    - by BryCoBat
    I have 2 Windows XP boxen: A (running XP SP3) and B (running XP SP2). I'm using Remote Desktop to connect from A to B. When I connect, I get the login screen (which is slow to respond to keyboard/mouse input), and after logging in, I get the following: Fatal Error (Error Code: 5) Your Remote Desktop session is about to end. This computer might be low on virtual memory. Close your other programs, and then try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support. I've seen one way to (sometimes) get in by opening a second RDP session to the same box [1], and if I wait long enough sometimes it will go ahead and log in anyway. Is there something broken/missing on the PC I'm trying to remote in to? Edited in reply to djangofan: There's nobody listed under "Lock pages in memory". When the double login trick works, a glance at Task Manager shows plenty of free memory, 800MB available out of 1.5 GB. (Performance tab, Physical memory) For what it's worth, this happens consistently after a reboot. What sort of exact info would be useful? There's very little remaining installed on that machine that's not Windows + Office... [1] found at http://www.fdcservers.net/vbulletin/archive/index.php/t-1580.html

    Read the article

  • WRTU54G-TM router with 3rd party firmware; Can custom firmware include stock binary portions?

    - by dlamblin
    I've been doing a lot of reading online about the Linksys WRTU54G-TM router model that I now own. It seems getting a custom firmware onto it is not a problem. But no one is talking about retaining the Voip features (yet). So far they're all disappointed that it's not a SIP machine and used GSM over IPSec. Personally I don't care about using it with non-t-mobile. If I take the original firmware, shouldn't I be able to extract it, and it's SquashFS image, and then move all of the t-mobile specific binaries for enabling the calling features over to a custom firmware installation (maybe OpenWRT)? You might ask why, and the reason is, that if I do this I could retain my calling features, which I do want, and ssh to the router and use it to run additional software, as any OpenWRT router could do. Does anyone know if this can be done, and how the firmware's binaries could be gotten at and installed correctly? Update I have found someone working on 3rd party WRTU54G-TM firmware. I am still interested in my second part of the questions, that is can't the stock firmware images be pulled apart and have the close-source, if any, binary kernel modules moved into another more flexible custom firmware?

    Read the article

  • Solaris TCP stack tuning

    - by disserman
    We have a large web project (about 2-3k requests per second), using haproxy (http://haproxy.1wt.eu/) as a frontend and load balancer between the java application servers. The frontend (haproxy) is running on Linux but we are going to migrate it to the Solaris 10 as all our other servers are running under Solaris. After switching a traffic I see the two things: a) the web site became loading slower (5-10 seconds with images in comparison to 2-3 seconds on Linux) b) sometimes haproxy fails to perform a "lifecheck" (get a special web page and analyze http response code) due to the socket timeout. After switching traffic back to Linux everything is okay. I've tried to tune all params I found in /dev/tcp but no progress. I believe the problem is in some open socket limitations. If someone can point me to the answer, I would be greatly appreciated. p.s. haproxy is running under Xen DomU on Linux (Kernel 2.6.18, Debian 5), under zone on Solaris (10 u8). the only thing we did on Linux is increasing of ip_conntrack_max (I believe Solaris option tcp_conn_req_max_q is the equivalent).

    Read the article

  • Hyper-V Guests Dying

    - by Jon Rauschenberger
    I just hit my THIRD instance of a Hyper-V guest machine dying with the exact same behavior. In all three instances we are hosting WS2008 guests on a WS2008 host. AFter a config change, we reboot the guest and the guest OS comes up but in a very cripled state. Specifically, we are able to log into the guest, but can't launch any apps and the guest never comes active on the network. I opened a support ticket with MS the second time this happened and they focused in on the DCOM subsystem not coming up...best explanation they could provide was that permissions on key system files got corrupted. I eventually gave up on the ticket after close to 10 hours on the phone trying different things that were going no where. What really concerns me is that we have now seen the exact same thing happen to a guest hosted on a completly differet host machine. There is zero hardware overlap between the two. Has anyone seen this before?? It's really odd behavior, but it also seems like there's a pattern here that's concerning me. Thanks, jon

    Read the article

< Previous Page | 446 447 448 449 450 451 452 453 454 455 456 457  | Next Page >