Search Results

Search found 16987 results on 680 pages for 'second'.

Page 457/680 | < Previous Page | 453 454 455 456 457 458 459 460 461 462 463 464  | Next Page >

• Very strange networking problem in all computers in my house

  - by Anthony

  I have three computers in my house: One desktop (wired), and two laptops (wireless). I'm using Cox Communications (yes they suck), and yesterday they had a major outage. I know it was them because I called them up when I started losing connection to the internet. All the computers can connect just fine, but they don't have internet access. It just says "local only". The weird thing is, some of them work occasionally. For the first day my laptop was working perfectly, while all the other computers couldn't connect. Later on in the day it got reversed, and the desktop was the one with internet access. By the second day the problem on Cox's end was fixed, but we still had no access. I called them up and they reset my modem, and did the usual troubleshooting stuff. It never fixed the problem, but we found out that the problem had to do with conflicting IP addresses. My router was a Linksys WRT54G and it was about 5 years old. I figured it might have gotten damaged from the outage since it was so old, and now it's having trouble "fixing itself" and giving out the proper IP addresses. So I bought a new router, a Cisco Linksys E1000. I set everything up, and still the same problem. My computer has access right now (that's how I'm writing this), but no other computers seem to be able to get access. Is there possible damage to the modem? Can someone help me please? Sorry for this being so long.

  Read the article

• Webservice randomly dropping connections - possibly due to firewall nonevent data?

  - by adam

  I have a hosted webapp which requests data from a REST webservice in our office. Each page calls one (or several) webservices, which go from our host, via our firewall (a Watchguard Firebox) to a server in our office. All of a sudden, the app has dramatically slowed. We have determined that the webservice is timing out at random when called externally (it's fine when called within the office network). I'm pretty certain it's our connection which is dropping the webservice call, so I've written a quick php/curl script which calls the webservice over many iterations and shows the various timings. Below is an example output, showing both a failed and a successful call (with a 5 second timeout): http_code namelookup_time connect_time pretransfer_time starttransfer_time total_time 1 0 0.000096 0.0342 0.0000 0.0000 0.0342 2 200 0.000052 0.0332 0.1327 0.1751 0.1752 As per iteration #1 above, failed requests seem to be failing between connect and pretransfer. I'm not sure if this shows that the connection is successfully past the firewall, or could the firewall still cause an issue? Our firewall is showing a series of nondata event log messages for the relevant access rule. Our IT team tells me these are routine, although I can find no mention of these in Google. I'm not sure if this fits in between connect and pretransfer. Having elinated the webservice server (by testing internally) and the live webapp (by testing different code on different external servers, I am left suspecting the connection to the office. Could the firebox nondata events be causing a problem between connect and pretransfer?

  Read the article

• Adding add-ins to excel - strange communicates

  - by Jacob

  I am using Excel 2010 and 2013. I would like to add an excel add-in from page http://xlloop.sourceforge.net/ . There is file with name xlloop-0.3.2 and extension Microsoft Excel XLL Add-In. I added this file from menu File - Options - Add-Ins - In combobox Manage i choosed Excel Add-Ins - Go... - Browse and I choosed my file. I see the following comunicate: "C:\...\xlloop-0.3.2.xll" is not a valid add-in. Thus, I do next attempt. I go from menu File - Open - and I choosed my file. I see comunicate: The file you are trying to open "xlloop-0.3.2.xll", is in a difference format than specified by the file extension. Verify that the file is not corrupted and is from a trusted source before opening the file. Do you want to open the file now? After I clicked Yes I see a lot of signs (something like from chinese :)) My last attempt was double clicked on file. I see: The file format and extension of "xlloop-0.3.2.xll" don't match. The file could be corrupted or unsafe. Unless you trust its source , don't open it. Do you want open it anyway? After clicked yes I see something like the second attempt. I am really very confused because some of my friends have the same version of excel and they don't have these communicates. Do you have any idea where is the problem in my excel? I very need this addin to work with Java. I will very grateful for your help! Thanks in advance!

  Read the article

• How should I monitor memory usage/performance in SunOS/Solaris?

  - by exhuma

  Last week we decided to add some SunOS (uname -a = SunOS bbs-sam-belair 5.10 Generic_127128-11 i86pc i386 i86pc) machines into our running munin instance. First off, the machines are pre-configured appliances, so, I want to avoid touching the system too much without supervision of the service provider. But adding it to munin was fairly easy by writing a small socket-service (if anyone is interested, I put it up on github: https://github.com/munin-monitoring/contrib/tree/master/tools/pypmmn) Yesterday, I implemented/adapted the required plugins for our machines. And here the questions start: First, I have not found a way to determine detailed memory usage values. I get the total memory by running prtconf | grep Memory, and the free memory using vmstat. Fiddling together a munin-plugin, gives me the following graph: This is pretty much uninformative. Compare this to the default plugin for linux nodes which has a lot more detail: Most importantly, this shows me how much memory is actually used by applications. So, first question: Is it possible to get detailed memory information on SunOS with the default system tools (i.e. not using top)? Onto the next puzzle: Seeing the graphs, I noticed activity in the "Paging in/out" graphs, even though the memory graph still has unused memory: Upon further investigation, I found out that df reports that /tmp is mounted on swap. Drilling around on the web, I understood that df will display swap, but in fact, it's mounted as a tmpfs. Now I don't know if this explains the swap activity. The default munin-plugin for solaris uses kstat -p -c misc -m cpu_stat to get these values. I find it already strange that this is using the cpu_stat module. So maybe I simply misinterpret the "paging" graphs? Second question: Do the paging graphs indicate that parts of the memory are paged to disk? Or is the activity caused by file operations in /tmp?

  Read the article

• VBScript Capture StdOut from ShellExecute

  - by Joe

  I am trying to run the following code snippet as part of a tool to gather and log some pertinent system diagnostics. The purpose of this snippet is to gather the result of running the command: vssadmin list writers The snippet is as follows: ' Set WshShell = CreateObject("WScript.Shell") ' WScript.Echo sCurPath & "\vsswritercheck.bat" ' Set WshShellExec = WshShell.Exec("elevate.cmd cmd.exe /c " & sCurPath & "\vsswritercheck.bat") Set oShell = CreateObject("Shell.Application") oShell.ShellExecute "cmd.exe", sCurPath & "\vsswritercheck.bat", , "runas", 1 vsswriter = VSSWriterCheck Select Case oShell.Status Case WshFinished strOutput = oShell.StdOut.ReadAll Case WshFailed strOutput = oShell.StdErr.ReadAll End Select WScript.Echo strOutPut vsswriter = strOutPut With the first code snippet (commented out) I can run the command and capture stdout from the batch file. In the second code snipped, I cannot capture stdout. I need to be able to run the batch script with Elevated permissions, so I am looking for a compromise between the functionality of the two. I cannot run the entire calling script in elevated mode due to restrictions from other pieces of functionality. I am looking for any ideas on how to add this output to my log as I am running out of options that are within the scope of basic scripts.

  Read the article

• One Comcast Business Gateway, One Router, Two Web Servers

  - by Kevin Scheidt

  I have a Comcast business account with a router and a web server (info) attached. behind the router there are multiple computers and a second web server (info) which also serves as a file server. (info) has two nics in it. One direct to comcast and one connected to the router. It needs to serve the world it's websites. It needs however, to also be able to see all the internal computers and (com)'s served files. With just 1 nic (the one connected to the router, not comcast), (info) works fine but no one outside can see it. (com) services port 80 and (info) needs to handle port 80 as well. I have two domain names registered, and 5 static ip's from comcast. right now h t t p: / /www.graceamazing.com handled by (com) works fine and h t t p: / /www.graceamazing.com:1307 handled by (info) works fine. but as soon as I enable the 2nd nic in (info) h t t p: / /www.graceamazing.info runs extremely slow (Horribly slow). however, h t t p: / /www.graceamazing.com:1307 and .com work fine. (com) has an ip address via the router 70.89.233.41 (info) has a ip addy of 70.89.233.46 via comcast (2nd nic) and a internal ip of 192.168.x.100 via static behind the router. Any suggestions or changes to make that will make h t t p: / /www.graceamazing.info perform with the same speed it has when going through h t t p: / /graceamazing.com:1307 is there a setting I should check / could have misssed?

  Read the article

• Kickstart CentOS 6 prompting for TCP/IP with network set to DHCP

  - by Andy Shinn

  I am trying to stop my kickstart CentOS install prompting me for TCP/IP information. After I click through this prompt (keeping IPv4 and IPv6 to their defaults) the installation continues and completes just fine. Below is my kickstart file: # Andy's super awesome VM kickstart file install url --url=http://mirrors.kernel.org/centos/6/os/x86_64 lang en_US.UTF-8 keyboard us text %include /tmp/network.ks rootpw --iscrypted $6$RA8DyrNTsVJkGIgY$ohZ62HHiOjNnn1yDMZlIu3lQ63D3plGPcbVZtPKE8Oq6Z.IGUgN.kNLkxs/ZymZuluRDWsW2eey5zLOl2G3mp. firewall --service=ssh authconfig --enableshadow --passalgo=sha512 selinux --disabled timezone America/Los_Angeles bootloader --location=mbr --driveorder=vda --append="crashkernel=auto rhgb quiet" # The following is the partition information you requested # Note that any partitions you deleted are not expressed # here so unless you clear all partitions first, this is # not guaranteed to work zerombr clearpart --all --drives=vda --initlabel part /boot --fstype=ext4 --size=500 part pv.253002 --grow --size=1 volgroup vg1 --pesize=4096 pv.253002 logvol / --fstype=ext4 --name=lv_root --vgname=vg1 --grow --size=1024 --maxsize=51200 logvol swap --name=lv_swap --vgname=vg1 --grow --size=4032 --maxsize=4032 repo --name="CentOS" --baseurl=http://mirrors.kernel.org/centos/6/os/x86_64 --cost=100 repo --name="Puppet Labs Products" --baseurl=http://yum.puppetlabs.com/el/6/products/x86_64 repo --name="Puppet Labs Dependencies" --baseurl=http://yum.puppetlabs.com/el/6/dependencies/x86_64 repo --name="EyeFi" --baseurl=http://flexo.eye.fi/6/eye-fi-api %packages @core @server-policy puppet facter %end %pre --erroronfail #!/bin/bash for x in `cat /proc/cmdline`; do case $x in SERVERNAME*) eval $x echo "network --onboot yes --device eth0 --bootproto dhcp --hostname ${SERVERNAME}.eye.fi" /tmp/network.ks ;; esac; done %end %post puppet agent --waitforcert 10 --onetime --no-daemon --pluginsync --server puppet.eye.fi %end reboot My kernel arguments are in this following virt-install command that I use to start the install: virt-install -n zabbix -r 2048 --vcpus=2 -l http://mirrors.kernel.org/centos/6/os/x86_64 --disk /dev/vg_inf1/zabbix --network bridge=br85 --initrd-inject=/home/ashinn/vm_kickstart --extra-args "ks=file:/vm_kickstart SERVERNAME=zabbix" --autostart During the install, I can pull up a console on the second terminal and verify the contents of /tmp/network.ks are: network --onboot=yes --bootproto=dhcp --ipv6=auto --hostname=jenkins2.mydomain.com Why might Anaconda be prompting for the TCP/IP settings when they are already set to DHCP?

  Read the article

• Archiving mails with postfix: how to filter mails?

  - by Tronic

  i wanto to implement the following scenario: we use a postfix mailserver. to archive all old and new mails, i want to setup a second postfix on our fileserver and create a single mailbox "archive". then every mail gets forwarded as bcc to this mailbox automatically. now, i want to create different folders in a maildir structure and let the server move each mail to the right subfolder of the mailbox based on its sender or receiver. e.g. when we get a mail to one of our employees named "John Doe" at [email protected], the mail should be moved to "Inbox/John Doe Incoming". the same applies when john doe sends a mail, folder would be "Inbox/John Doe Outgoing". how can i implement this filter behaviour. i heard of Procmail and Maildrop. Which of the two would you prefer? Which is more easy to configure? Any out-of-box solutions here? thanks in advance!

  Read the article

• Password-protected sharing allows access to users who have no account?

  - by romkyns

  Running Win7 on two computers in my LAN. Computer A has password-protected sharing enabled, and shares a folder. It has a single user account "Bob", and the Guest account is turned off. The network is workgroup-based. According to the descriptions of the "password-protected sharing" I could find, the only people who can access the shared folder via the LAN are those who know the username+password for the "Bob" account. However a second computer on the LAN is able to view this shared folder by simply browsing to Computer A. They don't need to enter any passwords or anything. The only user account registered on that PC is called "Jim", and has a different password from "Bob". How on earth is computer B able to view this shared folder? Is the popular description of the "password-protected sharing" feature inaccurate / did I misunderstand it big time? P.S. There is a possibility that the password for "Bob" has been entered on that PC once, and possibly the "remember password" box was checked. I've looked in the "Credential Manager" on both computers and there is nothing saved anywhere.

  Read the article

• install Win7 SP1 with bcdedit failing

  - by Albert

  I'm getting the error 0x800F0A12 which is described here. bcdedit says: C:\>bcdedit.exe Der Speicher für die Startkonfigurationsdaten konnte nicht geöffnet werden. Das System kann die angegebene Datei nicht finden. (English: Couldn't open the start configuration. Couldn't find the file.) (off topic: how can I get those messages in English?) I played around and I assume that is because the system partition C:\ is not on the first BIOS disk. There are 4 disks in my PC. On one of them (shown as the 4th in Windows drive manager) contains Windows, whereby the system-reserved NTFS partition is the first primary and the second primary is my main Windows system partition. A few more partitions follow with other (non-NTFS) stuff. I was able to set the first two disks offline (via the Windows drive manager). For the 3rd disk, it says that it cannot set the BIOS 0 disk offline. How can I ignore that and still install SP1? I don't want to rewire/resetup my disks.

  Read the article

• Running WordPress and Ghost on Apache with mod_proxy

  - by Jack Perry

  I currently have three WordPress sites hosted on Apache with virtual host files to direct the right domain to the right DocumentRoot. Ghost (node.js) just came out and I've wanted to tinker with it and just play around on one of my spare domains. I'm not really interested in moving over to nginx so I'm trying to get Ghost working on Apache via mod_proxy. I've managed to get Ghost working on my spare domain, but I think there's a problem with my virtual host files, as all of my other domains start pointing to Ghost as well. Here are two virtual host files, one for my main WordPress site that works fine, and the second for Ghost. Domains removed and replaced with DOMAIN and DOMAIN2. DOMAIN <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName DOMAIN.com ServerAlias www.DOMAIN.com DocumentRoot /var/www/DOMAIN.com/public_html <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /var/www/DOMAIN.com/public_html> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> DOMAIN2 <VirtualHost IP:80> ServerAdmin EMAIL ServerName DOMAIN2.com ServerAlias www.DOMAIN2.com ProxyPreserveHost on ProxyPass / http://IP:2368/ </VirtualHost> I get the feeling I'm not working with virtual hosts or mod_proxy right, and Google-fu has let me down after many suggested attempts. Any ideas? Thanks!

  Read the article

• Multiple Set Peer for VPN Failover

  - by Kyle Brandt

  I will have two Cisco routers at Location A serving the same internal networks, and one router in location B. Currently, I have one router in each location with a IPSec site-to-site tunnel connecting them. It looks something like: Location A: crypto map crypto-map-1 1 ipsec-isakmp description Tunnel to Location B set peer 12.12.12.12 set transform-set ESP-3DES-SHA match address internal-ips Location B: crypto map crypto-map-1 1 ipsec-isakmp description Tunnel to Location A set peer 11.11.11.11 set transform-set ESP-3DES-SHA match address internal-ips Can I achieve fail over by simply adding another set peer at location B?: Location A (New secondary Router, configuration on previous router stays the same): crypto map crypto-map-1 1 ipsec-isakmp description Tunnel to Location B set peer 12.12.12.12 set transform-set ESP-3DES-SHA match address internal-ips Location B (Configuration Changed): crypto map crypto-map-1 1 ipsec-isakmp description Tunnel to Location A set peer 11.11.11.11 ! 11.11.11.100 is the ip of the new second router at location A set peer 11.11.11.100 set transform-set ESP-3DES-SHA match address internal-ips Cisco Says: For crypto map entries created with the crypto map map-name seq-num ipsec-isakmp command, you can specify multiple peers by repeating this command. The peer that packets are actually sent to is determined by the last peer that the router heard from (received either traffic or a negotiation request from) for a given data flow. If the attempt fails with the first peer, Internet Key Exchange (IKE) tries the next peer on the crypto map list. But I don't fully understand that in the context of a failover scenerio (One of the routers as Location A blowing up).

  Read the article

• CentOS - mdadm raid1 drive won't mount to default location

  - by danny

  I'm running CentOS 5.5, the system, boot, swap, etc. is all on /dev/sda and I have two identical single-partition drives /dev/sdb1 /dev/sdc1 that are configured in RAID1 (using mdadm). It was working fine (configured to mount to /mnt/data in the fstab file) and I recently let yum install a couple of automatic updates without paying attention to what they were, and now it doesn't work. Raid is working fine (dmesg shows it gets loaded correctly). mdstat shows: # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdc1[1] sdb1[0] XXXX blocks [2/2] [UU] unused devices: <none> Additionally, I can mount it anywhere other than its default directory (i.e. the following works, and I can read data off the drives). # mount /dev/md0 /mnt/data2 EXT3-fs warning: mounting fs with errors, running e2fsck is recommended But when I run the following I get: # mount -a mount: /dev/sdb1 already mounted or /mnt/data busy It says nothing is mounted when I try to umount /dev/sdb1 or umount /mnt/data, so I assume it's the second of those errors. However, lsof | grep mnt shows nothing. The weird thing is that I can save files in /mnt/data. So something is obviously mounted there, but when I try to umount it I get the error that nothing is mounted. /etc/mtab doesn't mention any of the partitions or files I am trying to work with, and fstab just has that one line I mentioned above that is supposed to mount my raid partition. Again, it was all working fine until I On Google I've found a few things about dmraid interfering with mdadm after an update, but I yum remove'd dmraid and rebooted and it didn't help. I'm really confused and need to get this working to get on with my work!

  Read the article

• really weird DNS problem in Ubuntu {after one month, seems like ISP problem}

  - by OmniWired

  Hello everyone. I been having this random dns problem, in Ubuntu 10.04 and in 10.10 it started about 2 weeks ago after (I believe) an update. Basically when I go to a website randomly I get that the website I'm visiting is not available ("Oops! Google Chrome could not connect to ..." & "This webpage is not available."). I tested with Chromium "7.0.515.0 (58587)" and Firefox minefield (4.0ish) and 3.6.9. I did these 4 things already: /etc/default/grub GRUB_CMDLINE_LINUX="ipv6.disable=1" and this: /etc/sysctl.conf net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.default.disable_ipv6 = 1 net.ipv6.conf.lo.disable_ipv6 = 1 *disabling Chromium DNS pre-fetching *using Google and OpenDNS servers as well as ISP DNS servers. But didn't improve, also no other computers in my network have the same problem. All computer wired to the same router. I'm a software engineer that run out of ideas, please help me. Thanks in advance. UPDATE: some programs (synaptic / firefox update/ vuze(azureus)) say connection refused for the error. Most of the time a second try will fix the "refusal". UPDATE2: I found out with Wireshark, that everytime I have this problem i've got this 192.168.0.10 8.8.8.8 ICMP Destination unreachable (Port unreachable) Confirmed an ISP error. ISP;Speedy Location: Argentina, Buenos Aires (capital Federal) Area.

  Read the article

• Very slow browsing shared folder XP client/host

  - by Ickster

  I have a pretty straightforward setup where I'm storing media files on an XP pro machine, and sharing the folder to be accessed by other XP pro machines around the house. (Typically, there's only one client accessing the share at a time, although there may be several with the share mounted.) It's been working just fine for years, but I've recently started having some problems. A couple of days ago, the host PC had power disconnected while it was running. It was restarted and everything seemed fine initially, but since then browsing the shared folder from client machines has been extremely slow and actually reading data is all but impossible. The problem exists in every access method I've tried: Windows Explorer, VLC dialogs, command line, etc. My first thought was that the disk was experiencing problems, but there are no problems viewing the files locally on the host machine. My second thought was that there was a network problem on the host machine, so I removed and reinstalled drivers for the NIC with no change. My third thought was that there might've been a problem elsewhere on the network, so I swapped out hardware to no avail. I'm regrouping and trying to come up with a methodical approach to figuring out what might be wrong. I would of course be thrilled if you can suggest specific problems (Microsoft KB articles, etc.) that I might check, but I'm not expecting a silver bullet. If you can help me outline an approach to identify the problem (including recommended tools, e.g., disk checkers, network analyzers, etc.) I'd greatly appreciate it.

  Read the article

• Slow File Copy observed copying 40GB files across network to iSCSI device

  - by Rick

  Here's a curious ones for the gurus: Setup: Source Machine: Windows Server 2003 R2 machine with local hard drive. VHD file of 40GB. 1 x 1Gbps network card, Cat6 cable, switch. Target Machine: Windows Server 2008 R2 machine with iSCSI connection to iSCSI target on separate machine (1TB, RAID5). 1 x 1Gbps network card, Cat6 cable, connected to same switch as for Source Machine. Second 1Gbps network card, Cat6 cable, connected via isolated switch to the iSCSI target. Switches are Netgear JGS524 model (web managed). If I copy from the Win2003R2 machine to Win2008R2 machine local drive I get 40GB in 45 minutes, 36 seconds. If I copy from the Win2008R2 machine to the iSCSI target (local drive to iSCSI target) I get 40GB in 37 minutes 56 seconds. If I copy from the Win2003R2 machine to the iSCSI target via the Win2008R2 machine I get 40GB in 3 hours, 50 minutes, 24 seconds. All copies were done via the following command issued on the Win2008R2 box: XCOPY <source> <target> /J XCOPY /J - Copies using unbuffered I/O. Recommended for very large files. So, what's the bit I'm missing here? Why does a back-to-back copy take in total 1 hour, 23 minutes, 32 seconds when a "straight through" copy take almost 3 times as long? Switches show no errors, network hovers around the 3% utilisation mark for the duration of the copy (whereas the "back-to-back" copies are around the 25% utilisation mark). What have I missed?

  Read the article

• Strange windows boot problem - My computer won't boot from hard disk

  - by user29779

  Hello, Until yesterday, I had windows XP installed on my computer. After installing the OS, and setting the BIOS to boot from the hard-disk first, I discovered a strange problem - the OS wasn't booted and the only way I could get it to load was to insert a windows installation disk, enter repair mode, do "fixboot" and restart. The problem only occured when the computer was booted after shut-down. If I only restarted it, everything worked fine. Yesterday, I upgraded my XP to win7 and the problem persists. I tried the same "trick" I did with XP to get it to load, by entering repair and doing "bootrec /fixmbr" and "bootrec /fixboot" but that didn't work (and when I run "scanos" it didn't find any windows installations). Eventually, I got it to load by changing the settings in the BIOS to boot from CD first and HD second, removing the installation disk from the drive, letting it fail to boot from CD and then re-insert the disk. Anyone has any idea what may be the cause or how can I investigate this issue? Thanks! Marina

  Read the article

• Apache is spawning more and more processes!!

  - by erotsppa

  We have a LAMP setup that is working prety good for half a year. All of a sudden today the apache server (mysql servers are not on this box) started to die. It seems to have started to spawn more and more processes over time. Eventually it will consume all the memory and the server would just die. We are using prefork. In the mean time what we are doing is just added more ram and increased the MaxClients and ServerLimit parameter to 512. We're just prolonging the crash. The number still goes up slowly. Maybe in a day, it would reach that limit. What is going on? We only have around 15-20 request per second. We have 1Gb memory and it's not half used, there's no swapping going on. Why is apache creating more and more processes? It's almost like theres a leak somewhere! The database boxes are fine, they are not causing a delay to requests. We tested some queries everything is quick!

  Read the article

• Ping server NETBIOS name returns wrong IP and "Destination host unreachable"

  - by music2myear

  Problem server is Windows 2008 R2 VM running on VMWare ESXi 4 host. Single network adapter manually assigned single IP address (192.168.1.11). When I ping the server from any other network computer, it returns 192.168.1.124 and "Destination host unreachable". Yesterday I found a second network adapter assigned to this server with an IP of 169.254... indicating it had no real valid IP. Using the MAC addresses I determined which adapter was not needed/not wanted, and removed it using VMWare systems. This is the network Printer Server and, understandably, nothing is printing right now. I've looked at the solutions here Why was my ping answered by a different IP address than the one pinged? and they aren't applicable to my situation for the following reasons: Output of arp -a on another computer returns the correct IP address (.1.11) assigned to the correct MAC address, the incorrect IP .1.124 is not listed, and the MAC of the network adapter I removed yesterday is not listed at all. I checked out the Microsoft KB article which listed pretty much my exact symptoms ( http://support.microsoft.com/kb/981953 ) and it says to check binding orders and look for hidden adapters. But there are no hidden adapters, and there is only one Network Adapter listed in the Binding Order list. Essentially, I can communicate from the server TO any other network device, but I cannot communicate from any other network device TO the server. Help! UPDATE: Solution found, see this solution for the details.

  Read the article

• Weird fluctuating time on a XEN linux guest

  - by Vin-G

  I have a weird problem with some servers here at work. We have a few XEN guests who's current time fluctuates. # date;date;date;date;date;date;date Thu Feb 25 16:00:40 PHT 2010 Thu Feb 25 16:00:48 PHT 2010 Thu Feb 25 16:00:40 PHT 2010 Thu Feb 25 16:00:48 PHT 2010 Thu Feb 25 16:00:40 PHT 2010 Thu Feb 25 16:00:48 PHT 2010 Thu Feb 25 16:00:40 PHT 2010 As seen above, the time fluctuates between 16:00:48 and 16:00:40, which is problematic for us since computing for time differences in some of our scripts becomes inaccurate (ex. what should be a few ms differences becomes some few second differences, and even sometimes, negative differences). The problematic servers are linux guests on a XEN host. The time fluctuates on the guest systems, but it is okay in the host itself. I've ruled out ntpd since this happens irregardless of whether ntpd is running or not on the guest systems. Guest is on full virtualisation. The time on both the host and the guest does match except that the time in the guest fluctuates at about a few seconds from the host's time, and the host time does not fluctuate. /proc/sys/xen/independent_wallclock is 0 in the host and does not exist in the guest. Ntpd service was stopped and disabled. Setting independent_wallclock to 1 in the host has no effect (that is, time still fluctuates in the guest). Though I was not able to restart the guest as it is a production server. Might be able to do that over the weekend. Any ideas on what to check and how to resolve this problem?

  Read the article

• Redirect specific domains with DNS

  - by user66377

  Currently we filter internet content using OpenDNS, our internal Windows DC/DNS servers point to the router's DNS, which then points to the OpenDNS servers. This works well to block all computer's on the network equally. New issue. We now need to separate what computers can go to what sites. So facebook is blocked for everyone right now, but I need to open it up to the 3 community computers now. The 3 community computers will be on an untrusted network seperate from the company computers so they can have their own DNS server, from their own router. The issue is though they still must connect to the internet using the same IP address. So OpenDNS sees the same IP and blocks them the same way. We are looking into getting a second IP, but it's not likely an option without going up to the next major level with our ISP which we don't want to do. My thought is this. Can I setup a DNS server on the untrusted network, and then depending on the request that comes in, have it send it to either OpenDNS or our ISP's DNS? Example www.facebook.com and www.youtube.com are both on the OpenDNS blacklist. So if they go to www.youtube.com, the local DNS server goes to the ISP's DNS to get the IP and thus the client gets the right IP and can go to the site. This would be manually entered for each allowed site thus creating a white list. Then if they go to www.facebook.com, since the local DNS server does not find an entry, it sends the request to OpenDNS, which then sees the site is on the blacklist, and thus sends the it's blocked webpage. The local DNS server can be either Bind on Linux or MS DNS on Window 2008. If this can be done, can you give some direction as well as I've never setup a DNS such as this before. Thanks

  Read the article

• Need to Remove Exchange 2003 Server That Crashed During Transition to 2010

  - by ThaKidd

  As the title stated, we were running an Exchange 2003 server that we knew was going down soon so we purchased a second server and installed Exchange 2010 into the AD. We managed to move all of the mailboxes off of 2003 and also managed to get the Offline Address Book setup on 2010. At this point the 2003 server bit the dust and will no longer boot. Therefore we were unable to properly uninstall Exchange and remove the last 2003 server so it still exists in AD. As far as the clients are concerned, everything is working properly. However, when I run the Microsoft Exchange Profile Analyzer, I still see the old server and its Administrative Group. I am going to guess that since the old server is showing up in AD, I will not be able to raise Exchange or AD functionality (as the 2003 server was also the only AD DC) levels. I have forced the 2003 DC out of AD so that is no longer an issue. Old Setup: Windows 2003 Server Enterprise & Exchange 2003 Standard New Setup: Windows 2010 Server Enterprise & Exchange 2010 Standard Two Questions: How do you go about manually forcing the 2003 server and its administrative group out of AD? When that is finished, where do you raise the Exchange mode (can't find this for the life of me)?

  Read the article

• Is there any way to send Outlook meeting requests from a non-default calendar?

  - by rbeier

  Hi, We have a user with two Outlook accounts. [email protected] is of type Exchange; [email protected] is of type IMAP/SMTP. Both are actually on our Exchange server; but since an Outlook profile can only have one Exchange account, the second one is set up as IMAP. The user would like to send a meeting request from her xyz.com account, so the "from" address appears as [email protected]. Unfortunately that doesn't work. If she creates the meeting in her xyz.com calendar, the meeting request still goes out through her Exchange account, [email protected]. The meeting request "compose message" window has an Account dropdown below the Send button, but this has no effect. Before she sends the invitation, a warning appears: "Responses to this meeting request will not be tallied because this meeting is not in your main Calendar folder. Is this OK?" Is there any workaround for this? We're using Outlook 2007 and Exchange 2003 SP2. Thanks, Richard

  Read the article

• How to fix display on external Samsung Syncmaster shifted to the right when connected to Macbook Pro?

  - by joe larson

  Is there something special I need to do to be able to use external LCD displays with my new MacBook Pro? Do I need extra software, or do I possibly need a different cable? I'm attempting to use an external display with my MBP. I've got a "Mini DisplayPort to VGA Female Adapter for Mac", plugged into the thunderbolt port on my MBP, which I understood should be compatible with thunderbolt. I've tried this with three different SyncMaster models: a B2330 (21.5"), a EX2220 (22"), and a third (also 22" ish) which I don't have the model # for -- but all are 1920x1080 resolution; plus an additional HP monitor of similar size and resolution. In all four cases, the MBP recognizes the screen and choses the correct resolution. However, the display is shifted over about 1 inch. This is true no matter if I change screen resolutions also. The controls on the monitor for horizontal position don't help. Also, sometimes (especially if I drag an app over into the second screen), the screen starts skipping left to right and having bands of fuzz. Additionally, the monitor will periodically blink off for a moment, trying to switch from Digital to Analog and back (the Syncmaster shows text on the screen to tell you it's trying to do this). Often when it comes back from one of these blank-outs, it will show OK (no skipping or fuzz) but still shifted right; then after a few seconds it will go wrong again skipping and fuzzy. This photo shows the worst of it. I've added red rectangles to show the physical edge of the screen, and a yellow rectangle to show the empty space on the left of the screen. (Sorry for the awful quality and lighting!) Also, it's worth noting I am on Mac OS X 10.6.7, and yes I have this update 1.4 installed.

  Read the article

• Apple Mac OS X Mavericks inside Virtual Box

  - by John Sonderson

  I have a few questions regarding Mac OS X and OS virtualization. A. Given all the legal restrictions imposed by Apple on Apple products, I would like to know whether it is legal to install the new and freely downloadable Apple Mac OS X Mavericks inside Oracle Virtual Box. B. What about older OS X versions such as Mountain Lion? C. How many machines can I install it on. What if I don't use the Mac to which the OS is downloaded but only use it on Virtual Box, and prefer to, say, install Linux on the Mac computer so that it doesn't become unusable due to the single user license policy and me running the OS on Windows 7 within Virtual Box? D. I have a PC running Windows 7 but would like to get the OS off a second had Mac I'm planning to purchase for this purpose. How must we proceed to copy the OS to an ISO so that I can install it on Windows 7? I am unfamiliar with Macs and do not know what software to use for the purpose, nor where the OS is downloaded to (as an ISO, .app executable, .gz or .zip file or whatever). If anyone could provide some guidance with the process I would sincerely appreciate it. Thanks.

  Read the article

< Previous Page | 453 454 455 456 457 458 459 460 461 462 463 464  | Next Page >