Search Results

Search found 44090 results on 1764 pages for 'working conditions'.

Page 453/1764 | < Previous Page | 449 450 451 452 453 454 455 456 457 458 459 460  | Next Page >

• Wake-on-lan only works so many times

  - by Chance

  I have Wake-on-lan configured on my Windows XP machine so that the computer will wake up from Standby. Waking the computer from Standby via network traffic seems to work a certain number of times, say 4 or 5, then it stops working. If I restart the computer it seems to reset this behavior so that I can use WOL a few more times before it starts working. I use the command "wol" on my other, Linux machine with the appropriate IP address and MAC address of the card. I looked at the network card to see if it had different lights when WOL worked and when it didn't. When it has a solid amber light where the ethernet cable connects, WOL seems to work. When it has a flashing amber light, WOL does not. It seems that the system seems to almost "shut off" the card when it falls to sleep, but I don't know if this is a function of time or number of standby/wakeups. I have a 3Com 3c920 network card. If I look at the properties in Device Manager, I have "Allow this Device to bring the Computer out of Standby" checked. In the Advanced tab I have anything related to RWU (Remote Wake Up) enabled. I also believe I have the appropriate settings in BIOS related to Remote Wake-Up and I have tried both S1 and S3 power configurations in the BIOS. Intuitively, I would think I would uncheck "Allow the Computer to turn off this device to save power", but doing so disables the "Allow this Device to bring the Computer out of Standby" option. Does anyone know what is happening here or if there is a way to fix it? I have an integrated network card; would getting one that goes into a slot be better? I am running Windows XP on a Dell Optiplex GX240 with a 3Com 3c920 network card.

  Read the article

• Configure Apache + Passenger to serve static files from different directory

  - by Rory Fitzpatrick

  I'm trying to setup Apache and Passenger to serve a Rails app. However, I also need it to serve static files from a directory other than /public and give precedence to these static files over anything in the Rails app. The Rails app is in /home/user/apps/testapp and the static files in /home/user/public_html. For various reasons the static files cannot simply be moved to the Rails public folder. Also note that the root http://domain.com/ should be served by the index.html file in the public_html folder. Here is the config I'm using: <VirtualHost *:80> ServerName domain.com DocumentRoot /home/user/apps/testapp/public RewriteEngine On RewriteCond /home/user/public_html/%{REQUEST_FILENAME} -f RewriteCond /home/user/public_html/%{REQUEST_FILENAME} -d RewriteRule ^/(.*)$ /home/user/public_html/$1 [L] </VirtualHost> This serves the Rails application fine but gives 404 for any static content from public_html. I have also tried a configuration that uses DocumentRoot /home/user/public_html but this doesn't serve the Rails app at all, presumably because Passenger doesn't know to process the request. Interestingly, if I change the conditions to !-f and !-d and the rewrite rule to redirecto to another domain, it works as expected (e.g. http://domain.com/doesnt_exist gets redirected to http://otherdomain.com/doesnt_exist) How can I configure Apache to serve static files like this, but allow all other requests to continue to Passenger?

  Read the article

• How browsers handle multiple IPs

  - by Sandman4

  Can someone direct me to information on exact browsers behavior when browser gets multiple A records for a given hostname (say ip1 and ip2), and one of them is not accessible. I interested in EXACT details, like (but not limited to): Will browser get 2 IPs from OS, or it will get only one ? Which ip will browser try first (random or always the first one) ? Now, let's say browser started with the failed ip1 For how long will browser try ip1 ? If user hits "stop" while it waits for ip1, and then clicks refresh which IP will browser try ? What will happen when it times-out - will it start trying ip2 or give error ? (And if error, which ip will browser try when user clicks refresh). When user clicks refresh, will any browser attempt new DNS lookup ? Now let's assume browser tried working ip2 first. For the next page request, will browser still use ip2, or it may randomly switch ips ? For how long browsers keep IPs in their cache ? When browsers sends a new DNS request, and get SAME ips, will it CONTINUE to use the same known-to-be-working IP, or the process starts from scratch and it may try any of the two ? Of course it all may be browser dependent, and may also vary between versions and platforms, I'd be happy to have maximum of details. The purpose of this - I'm trying to understand what exactly users will experience when round-robin DNS based used and one of the hosts fails. Please, I'm NOT asking about how bad DNS load balancing is, and please refrain from answering "don't do it", "it's a bad idea", "you need heartbeat/proxy/BGP/whatever" and so on.

  Read the article

• Mac Mavericks, ngircd localhost works, private IP doesn't

  - by user221945

  I have configured ngircd to listen on my private ip address. It doesn't. Localhost works fine. Configuration test: ngIRCd 21-IDENT+IPv6+IRCPLUS+SSL+SYSLOG+TCPWRAP+ZLIB-x86_64/apple/darwin13.2.0 Copyright (c)2001-2013 Alexander Barton () and Contributors. Homepage: http://ngircd.barton.de/ This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Reading configuration from "/opt/local/etc/ngircd.conf" ... OK, press enter to see a dump of your server configuration ... [GLOBAL] Name = irc.bellbookandpistol.com AdminInfo1 = Jaedreth AdminInfo2 = San Diego County CA, US AdminEMail = [email protected] HelpFile = /opt/local/share/doc/ngircd/Commands.txt Info = Server Info Text Listen = 10.0.1.5,127.0.0.1 MotdFile = MotdPhrase = "Welcome to irc.bellbookandpistol.com" Password = PidFile = Ports = 6667 ServerGID = wheel ServerUID = root [LIMITS] ConnectRetry = 60 IdleTimeout = 0 MaxConnections = 0 MaxConnectionsIP = 6 MaxJoins = -1 MaxNickLength = 9 MaxListSize = 0 PingTimeout = 120 PongTimeout = 20 [OPTIONS] AllowedChannelTypes = #&+ AllowRemoteOper = no ChrootDir = CloakHost = CloakHostModeX = CloakHostSalt = kBih5mu\kVI!DC6eifT(hd4m/0'zb/=: CloakUserToNick = no ConnectIPv4 = yes ConnectIPv6 = no DefaultUserModes = DNS = yes IncludeDir = /opt/local/etc/ngircd.conf.d MorePrivacy = no NoticeAuth = no OperCanUseMode = no OperChanPAutoOp = yes OperServerMode = no RequireAuthPing = no ScrubCTCP = no SyslogFacility = local5 WebircPassword = [SSL] CertFile = CipherList = HIGH:!aNULL:@STRENGTH DHFile = KeyFile = KeyFilePassword = Ports = [OPERATOR] Name = [REDACTED] Password = [REDACTED] Mask = [CHANNEL] Name = #BBP Modes = tnk Key = MaxUsers = 0 Topic = Welcome to the Bell, Book and Pistol IRC Server! KeyFile = As you can see, it should be listening on 10.0.1.5, but it isn't. After turning on Apache manually, port 80 works on 10.0.1.5, but port 6667 doesn't. It only works on localhost. Is there some terminal command I could use or some config file I could edit to get this to work?

  Read the article

• Cannot Connect to VSFTP outside of network

  - by jnolte

  I am having a hair pulling issue with my VSFTPD. I am not sure where to turn and I have went through to make sure everything is working properly and when trying to connect to ftp using ftp localhost I am able to login with the username and password I have specified. When I try to connect from outside I get the prompt Connected to domainname.com. but no prompt for user and password in addition when using an FTP client it hangs up and never connects. The server is running Ubuntu 12.04 LTS and VSFTPD 2.3.5 Here is the output of running iptables -L : http://pastie.org/4892233 Here is he output when running ps -FC vsftpd : root 14343 1 0 1168 984 3 16:55 ? 00:00:00 /usr/sbin/vsftpd Here is output of running netstat -tlpn | grep vsftpd : tcp6 0 0 :::21 :::* LISTEN 14343/vsftpd I have uninstalled and reinstalled many times and tried several different configurations and am at a complete loss on why this may not be working. We very often use the same configuration on the same type of servers with no issues. Thank you in advance for your help.

  Read the article

• CD/DVD Drive not detecting locally burned CD/DVDs, but works fine with Genuine discs.

  - by Rahul

  I'm using Dell Inspiron 1420 - 32 Bit - Windows Vista, since 2.5 years. I'm facing a strange problem with my CD/DVD-drive. I cannot run/play a CD/DVD which I get burned from my friends. But when I insert Genuine CD, I'm able to play/run it. And when I try to install my Vista package which I got with my notebook, the CD/DVD gets loaded. If I insert a CD/DVD which I get from my friend, CD doesn't get loaded and the system gets hanged. But all these CDs/DVDs work on other systems. I've tested it on many of my friends PCs. So, now I'm able to run only genuine CDs & a few genuine DVDs. My Experience/Experiments: I tried to install Windows Vista using Genuine DVD - It worked I tried to install Ubuntu which I got from shipped from Canonical Ltd. - It worked I tried to install OpenSUSE .iso file burned to a DVD in my friend's PC - It didn't work for me (But working perfectly fine in my friends PCs(Tested in 4 other PCs) Tried to play a DVD containing movies, burned in my friend's PC - It didn't work for me (But working perfectly fine in my friends PCs Any help/suggestions would be appreciated. Thanks.

  Read the article

• ORA- 01157 / Cant connect to database

  - by Tom

  Hi everyone, this is a follow up from this question. Let me start by saying that i am NOT a DBA, so i'm really really lost with this. A few weeks ago, we lost contact with one of our SID'S. All the other services are working, but this one in particular is not. What we got was this message when trying to connect ORA-01033: ORACLE initialization or shutdown in progress An attempt to alter database open ended up in ORA-01157: cannot identify/lock data file 6 - see DBWR trace file ORA-01110: data file 6: '/u01/app/oracle/oradata/xxx/xxx_data.dbf' I tried to shutdown / restart the database, but got this message. Total System Global Area 566231040 bytes Fixed Size 1220604 bytes Variable Size 117440516 bytes Database Buffers 444596224 bytes Redo Buffers 2973696 bytes Database mounted. ORA-01157: cannot identify/lock data file 6 - see DBWR trace file ORA-01110: data file 6: '/u01/app/oracle/oradata/xxx/xxx_data.dbf' When all continued the same, I erased the dbf files (rm xxx_data.dbf xxx_index.dbf), and recreated them using touch xxx_data.dbf. I also tried to recreate the tablespaces using `CREATE TABLESPACE DATA DATAFILE XXX_DATA.DBF` and got Database not open As I said, i don't know how bad this is, or how far i'm from gaining access to my database (well, to this SID at least, the others are working). I would imagine that a last resource would be to throw everything away, and recreating it, but I don't know how to, and I was hoping there's a less destructive solution. Any help will be greatly appreciated . Thanks in advance.

  Read the article

• TLS_REQCERT and PHP with LDAPS

  - by John

  Problem: Secure LDAP queries via command-line and PHP to an AD domain controller with a self-signed certificate. Background: I am working on a project where I need to enable LDAP look-ups from a PHP web application to a MS AD domain controller that is using a self-signed certificate. This self-signed certificate is also using a domain name that is not a FQDN - think of something like people.campus as the domain name. The web application would take the user's credentials and pass them on to the AD domain controller to verify if the credntials are a match or not. This seems simple, but I am having problems trying to get PHP and the self-signed certificate to work. Some people have suggested that I changed the TLS_REQCERT variable from "request" to "never" within the OpenLDAP configuration. I am concerned that this might have larger implications such as a man-in-the-middle attack and I am not comfortable changing this setting to never. I have also read some places online where one can take a certificate and place it as a trusted source within the openldap configuration file. I am curious if that is something that I could do for the situation that I have? Can I, from the command line, obtain the self-signed certificate that the AD domain controller is using, save it to a file, and then have openldap use that file for the trust that it needs so that I do not need to adjust the variable from request to never? I do not have access to the AD domain controller and as a result cannot export the certificate. If there is a way to obtain the certificate from the command line, what commands do I need to use? Is there an alternate method of handling this issue that would be better in the long run? I have some CentOS servers and some Ubuntu servers that I am working with to try and get this going on. Thanks in advance for your help and ideas.

  Read the article

• Make UEFI, GPT, Bootloader, SSD, USB, Linux and Windows work together

  - by user129552

  I like to use the latest hardware and the latest software; thus I have a Laptop (Lenovo X220) with UEFI instead of BIOS an SSD instead of an HDD GPT partitioning scheme instead of MBR USB to boot from instead of optical disks. I need to use both Windows and Linux. I tried to make them work alongside, but I didn't succeed. Most Linux distribution isos don't even really work on UEFI systems booted from USB. (Not even the self-claimed cutting-edge Fedora. I also tried Linux Mint Debian Edition and Sabayon Linux (according to this guide) which did not work. Only Ubuntu worked for me. I first installed Windows 8 which created sda1: Recovery, sda2: EFI system, sda3: msftres, sda4: NTFS Windows. Windows worked without a problem. I then created sda5: linux-swap and installed Ubuntu into sda6: btrfs. After rebooting, I was not presented GRUB2 as expected, but instead my system just booted into Ubuntu. I could no longer access Windows. After fixing dpkg in btrfs Ubuntu, I followed the Ubuntu documentation on UEFI booting. The result left me with a broken GRUB2, but interestingly, when I wanted to select the device to boot from, I was not only presented the internal SSD, an attached USB device, or LAN, but also Grub2 (broken), Ubuntu and Windows. The result is not very satisfying to me. What would I have to do to fix everything? Or differently asked, what operating system should I install at what point given my possibilities and requirements, so that I have a working bootloader in my UEFI GPT system which presents me a working Linux and Windows.

  Read the article

• How to send from my Z88 to my PC

  - by Bevan

  I've got a Cambridge Z88 that I want to get working with my PC. Around 6 years ago - in 2004 - I made heavy use of my Z88 to do a whole bunch of writing on the train while commuting to and from work. The Z88 is solid state, lightweight and has a full size silent keyboard, so it works very well as a writing instrument. I still have the serial cable I soldered up back then and used successfully in 2004. It has these connections: Z88 9 pin ----- ------- 2 TxD ------> RxD 2 3 RxD <------ TxD 3 7 GND <-----> GND 5 4 RTS ------> CTS 8 5 CTS <-+ RTS 7 8 DCD <-+---- DTR 4 9 DTR ----+-> DCD 1 +-> DSR 6 Unfortunately, I haven't been able to find my notes from 2004 that describe how I got it to work back then. I've spent several hours trying to Google a result, but to no avail. I'm pretty sure the cable is fine - after all, it's what I used successfully six years ago, and I've checked it out with a multimeter - so I'm focusing on the PC end of things, which is where I'd like some assistance. Q1: In my recent attempts, I've been using both Hyperterminal (as built into Windows XP) and the command line (copy com2: con:), but with no success. What's a good (better!) serial communications application to use? Is there one that allows me to see as deep as the signalling that's occurring on the wire? Q2: If you have a Z88 that works correctly with your PC, what software do you use on the PC end, and what's the pinout of your cable? I'm pretty sure that the Z88 itself is working properly: When using the built in Import/Export tool to send a file, I see different behaviour when my serial cable is connected compared to disconnected. When disconnected, the transmission appears to work, with a progress meter counting up and then finishing; when connected, nothing happens 'cept a timeout if I wait long enough.

  Read the article

• Write permissions on uploaded files - Linux, Apache, PHP

  - by letseatfood

  I am working on a PHP script that transfers files using FTP functions. It has always worked on my production server (which is a hosting service). The development server I have just setup (I am a novice to servers) is Debian Lenny with Apache2, PHP5, and MySQL5. The file transfer works correctly, but once the file has been written to the server, it has permissions of 600. This makes it impossible for me to view the file (JPEG) in the web browser, as permission is denied. I have scoured the internet and even broken my server installation and reinstalled it trying to figure this out (which has been fun, nonetheless!). I know it is unwise to set 777 permissions on public accessible files, but even that will not solve the problem. The only thing that works is if I chmod 777 thefile.jpg after it has been transferred, which is not a working solution. I tried changing the owner of my site files to www-data per this post, but that also does not work. My user is mike, and it still does not work whether the owner of the files is mike or root. Would somebody point me in the right direction? Thanks! And, of course, let me know if I can clarify anything.

  Read the article

• Driver denied access to PCI card

  - by Corin

  Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

  Read the article

• What's wrong with my .htaccess? Trying to simplify actual code

  - by AlexV

  This is my actual .htaccess: #If the requested URI does not end with an extension RewriteCond %{REQUEST_URI} !\.(.*) #If the requested URI is not in an excluded location RewriteCond %{REQUEST_URI} !^/(excluded1|excluded2)/ #Then serve the URI via the mapper RewriteRule .* /seo-urls/seo-urls-mapper.php?uri=%{REQUEST_URI} [L,QSA] #If the requested URI ends with .php* RewriteCond %{REQUEST_URI} \.php.*$ [NC] #If the requested file is not seo-urls-mapper.php (avoid .htaccess loop) RewriteCond %{REQUEST_FILENAME} (?<!seo-urls-mapper)\.php.*$ #Then serve the URI via the mapper RewriteRule .* /seo-urls/seo-urls-mapper.php?uri=%{REQUEST_URI} [L,QSA] Since all conditions are compatibles except the 1st ones (no extension and *.php* match) all I should have to do is to add the [OR] condition to these 2 lines, but when I'm adding it it's not working (my no extension rule don't work anymore). This is my new (not working) code: #If the requested URI does not end with an extension OR if the URI ends with .php* RewriteCond %{REQUEST_URI} !\.(.*) [OR] RewriteCond %{REQUEST_URI} \.php.*$ [NC] #If the requested file is not seo-urls-mapper.php (avoid .htaccess loop) RewriteCond %{REQUEST_FILENAME} (?<!seo-urls-mapper)\.php.*$ #If the requested URI is not in an excluded location RewriteCond %{REQUEST_URI} !^/(excluded1|excluded2)/ #Then serve the URI via the mapper RewriteRule .* /seo-urls/seo-urls-mapper.php?uri=%{REQUEST_URI} [L,QSA] Hopefully someone will be able to clarify this issue... I guess I don't fully understand the use of [OR]. Thanks!

  Read the article

• Spreadsheet application that can handle big data OS X

  - by Peter

  I've been working with Excel for quite a while for some statistical analysis that I do regularly. The size of the data that I'm working with has gotten much larger as of late, however. The layout of the databases in question is quite simple, usually just three rows which includes a UNIX timestamp, and EST value, a proprietary numeric value and finally an average of the rows that have a timestamp +/- 1000 that row's timestamp (little AVERAGEIFS() formula). That formula and the EST conversion are the only formulas in the sheet. I'm beginning to work with files with 500,000+ rows. Running the average formula down the entire row takes forever. The end result is the production of print-worthy graphs. I'm looking for either a UNIX CL utility or separate spreadsheet/database application that can handle this amount of data without melting my CPU or making me wait an hour. Is there anything out there? TL;DR: Simple excel sheet with over half a million rows is getting too slow to work with. OS X alternatives?

  Read the article

• Windows 8.1 in a VMWare Workstation 10 guest's mouse is missing, but only sometimes

  - by Rob Perkins

  I have VMWare Workstation 10 running on a Windows 7 machine, hosting a k guest OS. Before upgrading to WS 10 I was using version 9, and the Win8 guest OS ran without difficulty or error conditions. Since upgrading and installing the most current VMWare Tools inside the guest after upgrading to version 10, there are circumstances where the mouse pointer is not visible; the mouse position appears stuck at a screen location which is not the center of the virtualized display; and mouse click and scrolling events still get processed. Once this begins happening I have to reboot the host machine to get it to stop. (VMWare Tools 9.6.1 build-1378637 is what the WS 10 software installed) The problem seems to correlate with whether the mouse is captured during Win 8.1's bootup process, before control is passed to the login screen. If I explicitly click the mouse into the guest OS and move it slowly around while the system is booting, then I see the mouse after clicking to lift the first screen and expose the password prompt, and there is never a problem within the guest. If I don't do this during bootup, there is no mouse pointer, with the symptoms listed above. I have tried removing and reinstalling VMWare tools, and the other steps published for "mouse problems" from VMWare's chaotic troubleshooting database. The problem persists. Is there a setting in the virtual machine's configuration which could prevent this behavior?

  Read the article

• Two hosts on same subnet can't see each other

  - by Joey Hewitt

  I've got two routers with two separate public IP addresses on the same subnet, but I can't get them to talk to each other. Both are connected to the internet (ISP-provided gateway) via Ethernet ports provided by the landlord, but I don't have access to or knowledge of how those are physically connected or the protocols used to get back to the ISP. I can ping either from the outside, but they can't ping each other. Traceroutes in and out look the same, and they receive the same gateway over DHCP. I can ping other IPs on the subnet, so I assume this is not any sort of intentional isolation for security/privacy. Since I'm in a setup where my landlord provides internet and we don't have contact with the ISP, I can't really ask the ISP for help (doubt the landlord would know much either.) The situation is similar to the diagram at this question, but instead of the two servers, there's another router coming off the (presumed) switch, and I don't have access to the switch. I've tried giving them static routes to each other with the ISP internet gateway as the gateway, but that's not working. One is a Linksys WRT54GL running DD-WRT, the other is a Netgear WGR614v7, although I could get something more capable if necessary. I'd like to keep them each connected directly to the ISP on their WAN ports, but I can have an ethernet cable between them if necessary - I'm wondering if there's a way without that, and if there isn't, I'd appreciate advice on how to get that working. Sorry this is so nitpicky; there are reasons for all the constraints, but they don't apply to the real question, so I left them out. ;) Thank you!

  Read the article

• Setup my domain at Whois.com as nameservers for a Dedicated Server with Kloxo

  - by BoDiE2003

  Hello, this is my first time at ServerFault, I'm a stackoverflow user. I'm faceing the next problem and may be its me, but I can't find proper guides to set up a domain and nameservers for a dedicated box. I have a domain, at whois.com, and a Dedicated server at Reliable Hosting Services, the server has 5 IPs, I know that I need 2 of them for the nameservers. Right now, my domain at whois.com is using nsX.whois.com nameservers and it has 2 child nameservers: ns1.mydomain.com & ns2.mydomain.com pointing to those 2 IPs from my Server. Whats next? I still cannot set that domain as my main server domain since it says: To map an IP to a domain, the domain must ping to the same IP, otherwise, the domain will stop working. The domain you are trying to map this IP to, doesn't resolve back to the IP, and so it cannot be set as the default domain for the IP. Well and I'm stuck on those steps, whats next to have my nameservers working and my main domain assigned to my server? Thank you very much and happy new year!!

  Read the article

• Windows 7 ICS client web failure

  - by n8wrl

  I have several windows 7 PC's connected on a LAN via a hub. One has a Verizon 3G connection and works great. I have internet connection sharing enabled on it, which automagically set the LAN connection to 192.168.137.1 and enabled DHCP. I am trying to get the client PC's working one at a time. The others are off. The client is able to: Get an IP via DHCP with correct settings. Ping any web address I can throw at it, so DNS and routing are working. Windows update works. But web sites hang in IE. All but google.com! I type www.msn.com, microsoft.com, amazon.com, etc. etc. All ping via a cmd window but IE just hangs - it says web site found but the green progress bar just slowly creeps and no content displays. www.google.com comes up even after clearing browser and dns cache. I am pulling my hair out - what am I missing? EDIT: After some more gyrations with a router I'm back to ICS. Same symptoms, only now I have an answer to Andrew's question, YES I can do Google searches but clicking on any of the result links hangs! Let one sit for half an hour with no timeout or error.

  Read the article

• IIS not responding with SSL Server Hello

  - by Damien_The_Unbeliever

  I'm having difficulty getting a particular IIS machine to "do" SSL. This is a test environment (one of many) which we've set up "the same" as we have many times previously, but it just doesn't seem to be working. The server is Windows Server 2003 (Version 5.2 (Build 3790.srv03_sp2_gdr.100216-1301 : Service Pack 2)) IIS is hosting 4 sites (including the default site), but only one site is configured for SSL. We're using the same SSL certificate we use on all of our other servers (it's a wildcard cert). (Don't think this is relevant, but including anyway) We've configured the site to require SSL, it has a subdirectory that doesn't require SSL but has an asp page that redirects into SSL. The 403;4 error page for the site is hooked up to this asp page (this is how we do our non-HTTPS into HTTPS transition). Using Microsoft Network Monitor (3.3), I've just run a session against a server where SSL is working. It can pull apart the SSL exchange as the following messages: SSL: Client Hello SSL: Server Hello. Certificate. Server Hello Done SSL: Client Key Exchange. Change Cipher Spec. Encrypted Handshake Message. SSL: Change Cipher Spec. Encrypted Handshake Message However, on our problem server, I only see: SSL: Client Hello. The next packet from the server (from port 443, so it's listening and responding there) contains only 60 bytes, and just seems to have the Tcp headers and not much else (but I'm by no means an expert at deciphering these things). So, where do I look next? Or what additional information do I need to add to this question, and where do I find it?

  Read the article

• LDAP SSL connect problem

  - by juergen

  I set up a test domain for my LDAP SSL tests and it is not working. I am using Windows Server 2008 R2 SP 1. I came so far: 1. i generated and installed my self signed certificate on the test domain controller 2. on the server i can log into ldap over SSL with the MS ldp.exe tool. 3. using ldp.exe on a client that is no in this domain the login fails with error 0x51 = "failed to connect". (i don't have a client computer that is in this domain right now) 4. I testet the certificate by using it in the IIS on the test server and I can reach the default page of the test server over SSL. (from the client that is not in the domain) 5. analysing the traffic between client and server I can see that the server is sending a certificate to the client. why isn't this working on my client computer?

  Read the article

• How to prevent Gnome-shell's Alt+Tab from grouping windows from similar apps?

  - by wleoncio

  I love pretty much everything about how Gnome Shell handles app-switching through Alt+Tab. My one gripe with it, though, is how it forces the user to use Alt+` to switch between windows of the same app. This is very annoying for me, because now I have to keep in mind if the last window I was using belonged to the same app as the current window or not. Definitely a nuisance for power users who thinks in terms of "windows I'm working with" instead of "applications I'm working on". I've tried the AlternateTab extension ( https://extensions.gnome.org/extension/15/alternatetab/ ), but it's looks way too ugly for me. Not to mention that in the end all I want is to remap Alt+(key above tab) to Alt+Tab on this application. I guess one option would be to just tweak Gnome-shell. My guess is that I should tinker with the altTab.js file at /usr/share/gnome-shell/js/ui/, but the file is too long and overwhelming for someone like me, who doesn't know JavaScript. Does anyone know how I can make Gnome Shell stop grouping windows by applications?

  Read the article

• [tcpdump] Proxy delegate refusing connexion ?

  - by simtris

  Hi guys, I'm a little disapointed ! My aim was to build a VERY simple smtp proxy under debian to handle mail from a port (51234) and forward it to the standard 25 port. I compile and install a "delegate" witch can handle easily that. It's working very well like that : delegated SERVER="smtp://anotherSmtpServer:25" -P51234 The strange thing is, it's working on my virtual test machine and on the dedicated server in local but I can't manage to use it trought internet. I test it like that. telnet [mySrv] 51234 Of course, no firewal, no deny host, no ined/xined, the service delegated is listening on the right port ... 2 clues : The port is answering trought internet with nmap as "51234/tcp open tcpwrapped" have a look at the tcpdump following : 22:50:54.864398 IP [myIp].1699 [mySrv].51234: S 2486749330:2486749330(0) win 65535 22:50:54.864449 IP [mySrv].51234 [myIp].1699: S 2486963525:2486963525(0) ack 2486749331 win 5840 22:50:54.948169 IP [myIp].1699 [mySrv].51234: . ack 1 win 64240 22:50:54.965134 IP [mySrv].43554 [myIp].auth: S 2485396968:2485396968(0) win 5840 22:50:55.243128 IP [myIp] [mySrv]: ICMP [myIp] tcp port auth unreachable, length 68 22:50:55.249646 IP [mySrv].51234 [myIp].1699: F 1:1(0) ack 1 win 46 22:50:55.309853 IP [myIp].1699 [mySrv].51234: . ack 2 win 64240 22:50:55.310126 IP [myIp].1699 [mySrv].51234: F 1:1(0) ack 2 win 64240 22:50:55.310137 IP [mySrv].51234 [myIp].1699: . ack 2 win 46 The part "auth" seems suspect to me but didn't ring a bell. I could certaily do with some help. Thx a lot !

  Read the article

• wild card redirects issue giving error this webpage has a redirect loop

  - by david

  In my website I changed or better word modified the directory name ""vehicles-cars"" to ""vehicles-cars-for-sale"" when i tried to redirect using wild card redirect my old directory name to new directory name in my web hosting cpanel account. every time when i open pages from that directory i am getting error code. This web-page has a redirect loop. The website is php. The problem is that that my lots of pages from old directory are indexed in googles and they are getting duplicate contents. If I redirect single page it works perfect but there are lots of pages so I need wild card redirect to redirect whole directory . I really need some advice what to do with this problem. Here is .htaccess file code for redirect thanks RewriteEngine on RewriteCond %{HTTP_HOST} ^example\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.example\.com$ RewriteRule ^vehicles\-cars\/?(.*)$ "http\:\/\/example\.com\/vehicles\-cars\-for\-sale\/$1" [R=301,L] i have other wilcard redirect of whole directory with same code and its working perfect here is the code in .htaccss file which is same as above and working perfect for this directory RewriteCond %{HTTP_HOST} ^adsbuz\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.adsbuz\.com$ RewriteRule ^autos\/?(.*)$ "http\:\/\/adsbuz\.com\/vehicles\-cars\-for\-sale\/$1" [R=301,L] so i dont understand whats wrong with the above code please i really need some expert advice thanks again

  Read the article

• What could be wrong with my VLAN?

  - by Matt

  I've got a VLAN 10 setup as a management VLAN. The management VLAN comes off port 48 and links to another set of switches that do not support VLAN's so it was I believe set up as an untagged access port. In the past this was a different brand of switch and this worked fine. However, since changing to the HP V1910-48G series I can't seem to get this working. I must point out that as far as I'm aware it is wired up properly (I can't check this physically as I'm working remote and have asked the tech who's got access to double check for me). Now I don't have a huge amount of experience with VLAN environments but AFAIK this is right. I've set the port 48 (linked to the management switches) as an untagged port with PVID 10 and access link type. Is this all I'd need to do from a configuration perspective to ensure all devices connected to port 48 would end up being on VLAN 10 and not needing to tag their frames. i.e. the tag would be added by the switch before being forwarded.

  Read the article

• Ping with explicit next-hop selection (aka Monitoring multiple default gateways)

  - by Michuelnik

  I have a linux (debian) router with two internet connections (A) and (B). (A) is preferred, (B) is fallback. I want to monitor the internet connection (and not only the availability of the gateways!) and change the default route appropriately. If (A) is not providing internet, switch to (B) If (A) is providing internet again, switch back to (A). Only problem I have is in case (2). My routing table points towards a working internet so I cannot easily detect whether internet is working over link (A) again. I am search for a ping or traceroute (or other diagnosis-tool) which can select the next-hop explicitly. ping -r looks promising, but can only ping a host on the lan. (It only has to write another destination address in the packet, damnit!) traceroute -g gateway looks even more promising and nearly does what I want - but sets source routing options which my next-hops deny. (Not within my administrative boundary...) I just want a $ping, that can: select a source interface (and address) select a next-hop on that interface ping any arbitrary ip address I could do evil trickery with policy-based routing but that would have production impact for all users. I would like to see a side-effect-free solution....

  Read the article

< Previous Page | 449 450 451 452 453 454 455 456 457 458 459 460  | Next Page >