Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 454/1359 | < Previous Page | 450 451 452 453 454 455 456 457 458 459 460 461  | Next Page >

  • Ubuntu 12.04 Frequent Kernel Panics

    - by Jordan Johns
    Dealing with what seems to be quantum behavior here. I'm having frequent Kernel panics and the problem is very hard to locate. To cut to the chase of what is going on I am essentially getting this screen: This occurs always after login (login screen is fine, can go into my TTY's and everything). But once I log in I have anywhere from 0 (instant) to 10 seconds before everything grinds to a halt and freezes. The only way I found out that it was a kernel panic was going into a TTY while it happens. At first, I figured something must be wrong with memory. Ran memtest86, full standard test. No errors. OK. CPU problem? Windows works fine, ran prime95 and a bunch of other torture tests for many hours. Drive problem? Nope. fsck reports no problems and the smart status is ok. Overclocking problem? Nope. Windows is working fine, and I also reset the bios to prove the point it was not the cause. At a loss here, even trying to reinstall the thing it gives me the same problem even attempting to install ubuntu (like right after you try to select "install ubuntu" or "try ubuntu first before installing"). Anyone have any thoughts? Its very bizarre, its as if my system hates linux and is trying to tell me not to use it (that would be a terrible reality). Thanks!

    Read the article

  • Good application for taking notes on 12.04?

    - by Ankit
    Is there a good note taking application in ubuntu like Evernote exists for windows and Mac users. Requirements for good applications:- A thumbnail/list preview for all the created notes. An integration with the email address so that we can view the notes anywhere anytime. Any easy way to input text, video, pdf, images etc. I have tried tomboy, basket notes. They aren't that good. Edit: Trying to install nevernote from an external source. But it has not satisfiable Further trying to install libssl gives the following error The following information may help to resolve the situation: The following packages have unmet dependencies: libssreflect-coq : Depends: coq-8.3pl3+3.12.1 but it is not installable libssreflect-ocaml : Depends: libcoq-ocaml-4zyg6 but it is not installable libssreflect-ocaml-dev : Depends: libcoq-ocaml-dev-4zyg6 but it is not installable E: Unable to correct problems, you have held broken packages. Anything that I might be doing wrong?

    Read the article

  • Sync profile/data/software for multiple computers?

    - by ultimatebuster
    Is it possible to sync all the user settings (interface settings, program settings), as well as programs for multiple computers? Data is not as important, though the settings (which is technically data, but not that kind of data, like music, files...) and applications are. Also, it will not sync the drivers. (Example: 1 computer uses bumblebee and the other uses ATI catalyst, and maybe there's different network drivers.. etc.)

    Read the article

  • Time out while mounting samba share

    - by nullDev
    I am trying to mount a hard-disk connected to my WDTV Live box. The following command smbclient -L 192.168.1.2 -U guest gives the following output: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.5.1] Sharename Type Comment --------- ---- ------- Expansion_Drive Disk Expansion_Drive MICROVAULT Disk MICROVAULT IPC$ IPC IPC Service (WDTV LIVE) Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.5.1] Server Comment --------- ------- WDTVLIVE WDTV LIVE Workgroup Master --------- ------- WORKGROUP But if I try sudo smbmount //WDTVLIVE/Expansion_Drive /home/ashish/wdtvlive/ -o guest,rw I get the following: Warning: mapping 'guest' to 'guest,sec=none' mount error(110): Connection timed out Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) I am able to browse and mount through Nautilus as well, but I dont want the drive to be mounted at gvfs.

    Read the article

  • Ubuntu 12.04 update + VirtualBox VM 4.1.14 r77440 - No input

    - by Gubatron
    I can only enter my password with the keyboard and this is what I see after I login If I try to switch to a terminal with CtrlAlt+F1 I get this I don't have a clue how to fix this, or if it's even possible to fix this without access to a terminal. The recovery console does not work either. It opens, but keyboard input doesn't seem to be working for it either. Anybody had this happened? Update (next day) Keyboard input lets me do Alt+F2 and invoke a terminal, but I can't change focus to the terminal window that opens. Any tip on how to switch focus (Alt+Tab wont work) to the terminal window. Maybe looking at this you might have a clue what's going on, maybe there's no window manager loading?

    Read the article

  • Lens showing only music after zeitgeist removal

    - by chris
    I can't get anything to show up in the Dash (lens?) other than music (no applications , no files) . This began when I removed zeitgeist. I've uninstalled and reinstalled, but still not working. I've also installed unity-place-files and unity-place-applications as suggested elsewhere. Under processes that are running I don't see zeitgeist.. (the original reason I wiped it out was because it was sucking up CPU). Ubuntu 12.04 Thanks in advance.

    Read the article

  • "sudo apt -get install foo-" causes removing foo package and everything depends on it

    - by M.Elmi
    While working in command prompt, I accidentally typed following command: sudo apt-get install python3- and ubuntu started removing python3 and everything depends on it (including firefox and much more). Fortunately I closed that terminal immediately and reverted everything by checking dpkg log file, but I was wondering why an install command should act like remove? Is it a bug? Consider the situation that you are looking for a package name (pressing Tab twice) and going through possibilities by pressing Enter key and those Enter keys remain in the keyboard buffer and.... youhaaaa... apt-get is removing the entire installation in front of your eyes.

    Read the article

  • is it possible for windows viruses when downloaded through ubuntu affect my windows os

    - by fr33c0untry
    I know that Ubuntu is immune to virus so there is no question of it getting infected while browsing the net.however i frequently transfer files from my pendrive (which i get from other virus infested computers) to my own laptop and save it on the data drive which is shared by both windows and ubuntu.i would like to know if there is a chance for windows viruses which might get saved and then infect it whenever i switch to windows later on.its ironic that i scan my pendrive using avast on windows and then save all my files to my hard drive to keep my laptop free from virus eventhough i have ubuntu.can anyone suggest an alternative.thanks in advance.

    Read the article

  • Ubuntu 13.04 alongside Windows 8 - How to partition from Windows

    - by mengelkoch
    I plan to install Ubuntu 13.04 alongside Windows 8, and I'm looking for a CLEAR answer on how to conduct partitioning appropriately. I'm very new to all of this so a thorough explanation with minimal jargon would be great. I have an Acer Aspire M5 x64 with 6G RAM. I think I already figured out how to deal with the fast startup, UEFI and SecureBoot issues (I disabled fast startup and disabled Secure Boot). I am able to boot into Ubuntu from a LiveUSB, and I think I am ready to install Ubuntu. Note - despite some advice found here, I do have to disable SecureBoot to boot 13.04 from my LiveUSB. From what I have read here, it seems that I should (at least at first) create the partitions from WITHIN Windows 8, not from the LiveUSB, to avoid reported problems. I have run compmgmt.msc and I see the existing partitions. I see the following: Disk 0: 400 MB Recovery; 300 MB EFI System; Acer (C:) 444.95 GB (Boot, Page File, Crash Dump, Primary Partition); 20 GB Recovery Disk 1: 3.74 GB Primary Partition; 14.90 GB Primary Partition I gather I need to create a mounting point '/' Partition (??), a swap partition, and a home partition. Please explain what these are, how big they should be, how I create them from Windows Disk Management, and anything else I need to know. Eventually, I plan to fully replace Windows 8 with Ubuntu, but for now I want to run alongside Windows 8 and not screw things up. I don't have any critical files saved on this computer yet. Thanks.

    Read the article

  • xen issues in wubi ubuntu 12.10

    - by user172069
    I have installed ubuntu 12.10 on my windows7.Now I want to install xen on it.I have searched a lot and read many blog.I tried to install but when i run a command xm list to check whether xen is install or not it gives me error that cant find hypervisor.Update grub command now not working as I have changed many things so should I reinstall from wubi? Is installing xen on wubi a problem?Should I install ubuntu from live cd or without wubi ?Will my windows crashed if install ubuntu without wubi?My main objective is to install xen on ubuntu.Please help me

    Read the article

  • How do I install lubuntu? (kernel panic)

    - by melvincv
    Please help me install Lubuntu 12.04 i386 on an old computer. I select the "Try Lubuntu without installing" and it crashes with a kernel panic. Rarely I do get to the live OS, but soon the display goes blank. The messages log gives me '[drm] ERROR GPU hung/wedged' The specs are: Pentium 4 2.4GHz 1GB DDR RAM 40GB PATA HDD Intel 845GL chipset (8MB framebuffer, 64MB shared system memory set in the BIOS)

    Read the article

  • How to change the terminal to SCO compliant

    - by kaushik
    I have a server in which SCO 5.x is installed. I have several thin clients which were supplied from our head office. Those thin clients have linux pre-installed in them. When we tried to connect to our SCO server, we have found out that the thin client does not support SCO terminal type. So the program (Which is written in Oracle forms) is not working correctly. Lots of function keys stopped working and screen also not getting refreshed correctly. Hence we decided to use Ubuntu Live USB keys in thin clients. Now the problem is how can we change the terminal type to SCO in ubuntu ? Means I want it in the text terminal (Alt+Ctrl+F1,F2...) (Not in xterm...graphical terminal emulators). Does ubuntu support SCO terminal type ?

    Read the article

  • How to replace GRUB with BURG without overwriting MBR?

    - by StepTNT
    I'd like to install BURG but I don't want it to overwrite my MBR. That's because I've got two bootloaders in my system : Default Windows 7 in MBR Grub in /dev/sda2 With the first power button, it will boot into Windows and with the second button it boots from /dev/sda2, loading Grub and then Kubuntu. Now I want to replace GRUB with BURG. I've installed Burg with burg-install /dev/sda2 --force because I don't want my MBR to be overwritten (pressing the first power button MUST load Windows and avoid showing any sign of Linux). Setup was completed without errors, If I open burg-manager it loads my settings, allowing me to change them and to test everything with burg-emu, so I've changed my settings but the second power button still loads GRUB (Even a different version from the default Kubuntu one). How can I replace GRUB that's on /dev/sda2 with BURG and without overwriting MBR?

    Read the article

  • Reasonable size for "filesystem reserved blocks" for non-OS disks?

    - by j-g-faustus
    When creating a file system ( mkfs ...) the file system reserves 5% of the space for its own use because, according to man tune2fs: Reserving some number of filesystem blocks for use by privileged processes is done to avoid filesystem fragmentation, and to allow system daemons, such as syslogd(8), to continue to function correctly after non-privileged processes are prevented from writing to the filesystem. But with large drives 5% is quite a lot of space. I have 4x1.5 TB drives for data storage (the OS runs on a separate disk), so the default setting would reserve 300 GB, which is an order of magnitude more than the the entire OS drive. The reserved space can be tweaked, but what is a reasonable size for a data disk? Can I set it to zero, or could that lead to issues with fragmentation?

    Read the article

  • Ubuntu 13.04 under Parallels Desktop - Black Desktop after X Windows Update

    - by Bob Reckhow
    I have been running Ubuntu 13.04 successfully on a MacBook Pro in a virtual machine in Parallels Desktop 9. Today (2013-10-17) after applying today's Ubuntu update, which included updates to X Windows, my Ubuntu 13.04 virtual machine launches, the launcher comes up, but the screen background is solid black, rather than the shaded orange colour of the default desktop background (and my desktop icons are "hidden behind this blackness", as well). I can launch applications from the launcher, and there is a very brief white flash on the screen, and then it returns to black. It's as if there is a "black blanket" covering the entire screen, so there is no way to interact with any application windows using the keyboard or mouse. The icons of the launcher are responsive to the mouse, so I can right-click and quit any application I have launched. But the rest of the screen is non-responsive to keyboard or mouse. This same behaviour happens with two different versions of Parallels Tools, so I am quite sure this is not a Parallels problem per se, although I could believe that it could be a paroblem with the interface between Parallels and this new updated X Windows code. Could anyone tell me what has happened, and how I might be able to fix this problem, so I can continue to use my Ubuntu 13.04 virtual machine? (I do have the option of reverting to a previous version of my virtual machine from before this update, but if possible I would prefer to keep my version of Ubuntu 13.04 up to date with the latest updates.) Thanks, Bob

    Read the article

  • Ubuntu 12.04 - after update it boots in command line only (no windows manager)

    - by ZSW
    I have Ubuntu 12.04, which has been working great for me since I installed it a year ago. Yesterday I ran the updates that update manager recommended. (Last time I ran updates before was about a week ago). After the updates were installed, it asked me to reboot. So I rebooted it, and then it stopped at login prompt (as a command line, with no windows). I logged in and tried to manually start the windows manager, and the screen went blank, and stayed blank I waited several minutes, and then turned it off. How can I figure out what is the problem? Which logs should I check?

    Read the article

  • Is Ubuntu running well on an usb hdd? Need suggestions

    - by Klaus
    Dear Linux and Ubuntu pros, I have here a company notebook, and because the hdd is full encrypted I cannot install an extra partition for another system that I would like to use in my free time. And I really need another system, because this crap windows here with that much of antivirus, antispyware, anti-whatever on it is sooo slow and anoying. What can I do? I could use an external usb hdd with another system. Because I would like to handle big files and so on, I dont want to use an sub stick. An usb 2.5hdd + ubuntu is what I think the best option. Here are my question: Do I have to note something? Is Ubuntu running well on an external hdd? Do I have big performance problems (because of the usb hdd)? Should I buy a very fast hdd for much money or is it not that important? Any suggestions? Thank you :)

    Read the article

  • Chrome Facebook Issue Ubuntu 11.10

    - by David Gaviria Piedrahita
    Facebook, navigating with Google Chrome 15.0.874.121 and using Ubuntu 11.10, when i try to comment, chat or give a "like it" the next blank page appears and don't let me do anything: http://www.facebook.com/ajax/ufi/modify.php I've tried with, based on what i found in internet: Erasing cookies and cache desynchronize chrome before erasing it Uninstalling chrome with: sudo apt-get purge google-chrome-stable Erasing manually: /.config/google-chrome directory And nothings solves the problem, Any ideas, would appreciate your help Thanks

    Read the article

  • Use two networks at the same time?

    - by Christopher
    I want to use Ubuntu 10.10 Server in a classroom, a computer lab whose bandwidth is provided by a local cable ISP. That's no problem, though the school network has an IP printer that I want to use. I cannot reach the printer through the cable Internet. But, I have two network cards. How is it possible to use both networks at once? eth0 (static 192.168.1.254) is plugged into a four-port router, 192.168.1.1. On the public side of the four-port router is Internet provided by the cable company. I also have the classroom workstations plugged into a switch. The switch is plugged into the four-port router. The whole classroom is wired into the cable Internet. The other NIC, eth1, could it be plugged into an Ethernet jack in the wall? It uses the school network, and I might receive by DHCP an IP address like 10.140.10.100, with the printer on maybe 10.120.50.10. I was thinking about installing the printer on the server so that it could be shared with the workstations. But how does this work? Can I just plug eth1 into the school network and access both LANs? Thanks for any insight

    Read the article

  • Ubuntu 14.04 hangs at purple screen after it asks for my password

    - by user286030
    I have installed Ubuntu 14.04LTS onto a Toshiba Tecra M5. The install appears to have been successful but when it says "install complete restart your computer" the computer does not restart. It just sits there, then after a forced shut down Ubuntu appears to start, icons appear in the top right hand corner of the screen but after it asks for my password it just hangs up on the purple screen. Can anyone help ?

    Read the article

  • Why can't I copy files to var/www/html?

    - by Alaa M.
    I copy some files, go to /var/www/html, right click, Paste isn't available. Why is that? I tried the command sudo nautilus, it opened the files navigation window, I navigated to /html, still the same problem. I also tried gksudo nautilus but it said: The program 'gksudo' is currently not installed. You can install it by typing: sudo apt-get install gksu I installed it, tried again, same problem. What should I do? edit: Figures that I was accessing the files inside a .zip directory and I shoulda extracted them first. Solved

    Read the article

  • How do I access a mounted Windows share from the command line?

    - by Bryan
    Hello all, I use Places > Connect to Server... to connect to a Windows share in my work environment (requires Kerberos authentication). When I do so, I can access the Windows share via Nautilus, but I can't figure out how to access the share from the command line without using smbclient. For example, the share isn't mounted under /mnt or /media. I also looked into ~/.gvfs but that's empty as well. Is it possible to access the mounted Windows share from the command line without using smbclient?

    Read the article

  • How can I run samba?

    - by depesz
    I have server running Ubuntu 10.10. Never used samba before, as I never had windows machines, but now I need it. So I did: apt-get install samba smbfs smbclient. Packages are installed, but I have no idea how to configure it. All howtos I found on the net relate to /etc/samba/something.conf, where I don't even have /etc/samba directory. The only config I found is /etc/default/samba, which contains (aside from comments) only: RUN_MODE="daemons" All I want is to be able to have access to some directories on the Ubuntu machine from Windows, nothing else.

    Read the article

  • How to remove the black bar at the top of my screen?

    - by Casper Li
    The display area is not fit to my monitor(1440x900) and there is a black bar at the top of my screen. The bottom of the display area can't be displayed. How can I deal with this problem? Moreover, I don't know how to install my display card's driver(MSI R4770 Cyclone). Do I need to install it? Here are some related pictures : My monitor My monitor Displays xrandr Thank you for your attention

    Read the article

  • Parse git log by modified files

    - by MrUser
    I have been told to make git messages for each modified file all one line so I can use grep to find all changes to that file. For instance: $git commit -a modified: path/to/file.cpp/.h - 1) change1 , 2) change2, etc...... $git log | grep path/to/file.cpp/.h modified: path/to/file.cpp/.h - 1) change1 , 2) change2, etc...... modified: path/to/file.cpp/.h - 1) change1 , 2) change2, etc...... modified: path/to/file.cpp/.h - 1) change1 , 2) change2, etc...... That's great, but then the actual line is harder to read because it either runs off the screen or wraps and wraps and wraps. If I want to make messages like this: $git commit -a modified: path/to/file.cpp/.h 1) change1 2) change2 etc...... is there a good way to then use grep or cut or some other tool to get a readout like $git log | grep path/to/file.cpp/.h modified: path/to/file.cpp/.h 1) change1 2) change2 etc...... modified: path/to/file.cpp/.h 1) change1 2) change2 etc...... modified: path/to/file.cpp/.h 1) change1 2) change2 etc......

    Read the article

< Previous Page | 450 451 452 453 454 455 456 457 458 459 460 461  | Next Page >