Search Results

Search found 15621 results on 625 pages for 'creating'.

Page 454/625 | < Previous Page | 450 451 452 453 454 455 456 457 458 459 460 461  | Next Page >

• Redirect specific domains with DNS

  - by user66377

  Currently we filter internet content using OpenDNS, our internal Windows DC/DNS servers point to the router's DNS, which then points to the OpenDNS servers. This works well to block all computer's on the network equally. New issue. We now need to separate what computers can go to what sites. So facebook is blocked for everyone right now, but I need to open it up to the 3 community computers now. The 3 community computers will be on an untrusted network seperate from the company computers so they can have their own DNS server, from their own router. The issue is though they still must connect to the internet using the same IP address. So OpenDNS sees the same IP and blocks them the same way. We are looking into getting a second IP, but it's not likely an option without going up to the next major level with our ISP which we don't want to do. My thought is this. Can I setup a DNS server on the untrusted network, and then depending on the request that comes in, have it send it to either OpenDNS or our ISP's DNS? Example www.facebook.com and www.youtube.com are both on the OpenDNS blacklist. So if they go to www.youtube.com, the local DNS server goes to the ISP's DNS to get the IP and thus the client gets the right IP and can go to the site. This would be manually entered for each allowed site thus creating a white list. Then if they go to www.facebook.com, since the local DNS server does not find an entry, it sends the request to OpenDNS, which then sees the site is on the blacklist, and thus sends the it's blocked webpage. The local DNS server can be either Bind on Linux or MS DNS on Window 2008. If this can be done, can you give some direction as well as I've never setup a DNS such as this before. Thanks

  Read the article

• Apache is spawning more and more processes!!

  - by erotsppa

  We have a LAMP setup that is working prety good for half a year. All of a sudden today the apache server (mysql servers are not on this box) started to die. It seems to have started to spawn more and more processes over time. Eventually it will consume all the memory and the server would just die. We are using prefork. In the mean time what we are doing is just added more ram and increased the MaxClients and ServerLimit parameter to 512. We're just prolonging the crash. The number still goes up slowly. Maybe in a day, it would reach that limit. What is going on? We only have around 15-20 request per second. We have 1Gb memory and it's not half used, there's no swapping going on. Why is apache creating more and more processes? It's almost like theres a leak somewhere! The database boxes are fine, they are not causing a delay to requests. We tested some queries everything is quick!

  Read the article

• DNS-Based Environment Determination

  - by zvolkov

  Found the following here. The questions is: where can I find more details on how exactly implement this on Windows? Any guide or how-to anybody? Or maybe you can provide your invaluable suggestions? Specifically, how do I make so that "all QA servers would first resolve entries in qa.example.com first and then if that lookup failed they would try example.com" (I'm a dev, not a DNS specialist, but our IT Support has refused to help on this:() Use DNS Based Environment Determination for your servers. Do this by initially splitting your top level domain into a number of sub domains depending on their function, and then creating DNS Service Names in each of the sub domains pointing to the relevant server for that service. Based on the list above we would then have: * clientdb.prod.example.com for Production * clientdb.perf.example.com for Performance Testing * clientdb.qa.example.com for QA * clientdb.dev.example.com for Development Servers then resolve entries in their relevant sub domain by function. That is, all QA servers would first resolve entries in qa.example.com first and then if that lookup failed they would try example.com. This allows you to have a single configuration entry for your client database hostname (clientdb) that would resolve correctly in all environments. This technique has the added advantage of still having global services defined in a common top level domain. This seems to be related to Providing "split horizon" DNS service. Reading that, I see that I will probably need separate DNS Server for each environment. Is this true or does Windows support some form of "tagging" the records to be visible depending on the requestor's IP?

  Read the article

• Homegroup should be working, but doesn't

  - by Tim

  I have Win7 installed on both my PC and laptop. When I choose to make a homegroup I can go through the steps of creating, getting password, then joining it from the other computer and it says that it all connects properly. But when I go to the homegroup tab it always says no other computers connected. If I look in the settings it will say "connected to suchandsuch homegroup" but the comps won't show. Also, on my PC, when I tick the boxes in the homegroup settings on what libraries I want to share, then click on save settings, it shuts down the settings window and when I re-open it the library tick boxes are all unticked again. Yet, I have had no problems with the tick boxes stayin ticked on the laptop. I have tried cancelling and remaking the homegroup, have tried making it on both computers, and have tried disabling and re-enabling the network connectors but it still won't work. At my old house we had 3 PCs running win 7 and 2 of them could homegroup together fine but mine never could as it was getting the same problem I am getting now. I feel like I am the only one on the planet with this problem. Can anybody help?

  Read the article

• Exchange 2010 Hub cannot deliver to Exchange 2007 Hub - "451 5.7.3 Cannot achieve Exchange Server authentication"

  - by Graeme Donaldson

  We have an existing Exchange 2007 server in Site A (exch07). I've installed an Exchange 2010 server in Site B (exch10). Both servers have the CAS, Mailbox and Hub roles. Messages sent via SMTP on exch10 which are destined for mailboxes on exch07 are queued with the "Last Error" reported in Queue Viewer as '451 4.4.0 Primary target IP address responded with: "451 5.7.3 Cannot achieve Exchange Server authentication." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.' I've found that some people have resolved this by creating new Receive Connectors which are scoped specifically to apply to connections from the remote hub/s, but I have had no luck doing this. Specifically I created new receive connectors on both servers with the following settings: Remote IP = IP/s of remote server Authentication = "Transport Layer Security (TLS)" and "Exchange Server authentication" Permission Groups = "Exchange servers" and "Legacy Exchange Servers" This made no difference, I see the same error message. What am I missing? Update: We noticed that the Application log had this error message from MSExchangeTransportService: Microsoft Exchange could not find a certificate that contains the domain name exch07.domain.local in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP verb for the connector exch10 with a FQDN parameter of exch07.domain.local. If the connector's FQDN is not specified, the computer's FQDN is used. Verify the connector configuration and the installed certificates to make sure that there is a certificate with a domain name for that FQDN. If this certificate exists, run Enable-ExchangeCertificate -Services SMTP to make sure that the Microsoft Exchange Transport service has access to the certificate key. It turns out that the default self-signed certificate was no longer enabled for the SMTP service for some reason. After enabling the self-signed certificate for SMTP, we no longer get the error in the event logs, but delivery is still failing with the same error message. Update 2: I put a mailbox on exch10 and attempted to deliver a message via SMTP on exch07 and I get the same error.

  Read the article

• Karmic iptables missing kernel moduyles on OpenVZ container

  - by luison

  After an unsuccessful p2v migration of my Ubuntu server to an OpenVZ container which I am stack with I thought I would give a try to a reinstall based on a clean OpenVZ template for Ubuntu 9.10 (from the OpenVZ wiki) When I try to load my iptables rules on the VM machine I've been getting errors which I believe are related to kernel modules not being loaded on the VM from the /vz/XXX.conf template model. I've been testing with a few post I've found but I was stack with the error: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. FATAL: Could not load /lib/modules/2.6.24-10-pve/modules.dep: No such file or directory iptables-restore v1.4.4: iptables-restore: unable to initialize table 'raw' Error occurred at line: 2 Try `iptables-restore -h' or 'iptables-restore --help' for more information. I read about the template not loading all iptables modules so I added modules to the XXX.conf of the VZ virtual machine like this: IPTABLES="ip_tables iptable_filter iptable_mangle ipt_limit ipt_multiport ipt_tos ipt_TOS ipt_REJECT ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_LOG ipt_length ip_conntrack ip_conntrack_ftp ip_conntrack_irc ipt_conntrack ipt_state ipt_helper iptable_nat ip_nat_ftp ip_nat_irc" As the error remained I read that I should build dependencies again on the virtual machine: depmod -a but this returned an error: WARNING: Couldn't open directory /lib/modules/2.6.24-10-pve: No such file or directory FATAL: Could not open /lib/modules/2.6.24-10-pve/modules.dep.temp for writing: No such file or directory So I read again about creating the directory empty and redoing "depmod -a" it. I now don't get the dependancies error but get this and I don't have a clue how to proceed: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. FATAL: Module ip_tables not found. iptables-restore v1.4.4: iptables-restore: unable to initialize table 'raw' Error occurred at line: 2 Try `iptables-restore -h' or 'iptables-restore --help' for more information. I understand that iptables rules have to be different on the VM machine and perhaps some of the rules we are trying to apply (from our physical server) are not compatible but these are just source IP and destination port checks that I would like to be able to have available . I've heard that on the CentOS template there are no issues with this, so I understand is to do with VM config. Any help would be greatly appreciated.

  Read the article

• Using Windows Explorer, how to find file names starting with a dot (period), in 7 or Vista?

  - by Chris W. Rea

  I've got a MacBook laptop in the house, and when Mac OS X copies files over the network, it often brings along hidden "dot-files" with it. For instance, if I copy "SomeUtility.zip", there will also be copied a hidden ".SomeUtility.zip" file. I consider these OS X dot-files as useless turds of data as far as the rest of my network is concerned, and don't want to leave them on my Windows file server. Let's assume these dot-files will continue to happen. i.e. Think of the issue of getting OS X to stop creating those files, in the first place, to be another question altogether. Rather: How can I use Windows Explorer to find files that begin with a dot / period? I'd like to periodically search my file server and blow them away. I tried searching for files matching ".*" but that yielded – and not unexpectedly – all files and folders. Is there a way to enter more specific search criteria when searching in Windows Explorer? I'm referring to the search box that appears in the upper-right corner of an Explorer window. Please tell me there is a way to escape my query to do what I want? (Failing that, I know I can map a drive letter and drop into a cygwin prompt and use the UNIX 'find' command, but I'd prefer a shiny easy way.)

  Read the article

• Managing ip6tables (or an alternative firewall) remotely

  - by Matthew Iselin

  I'm working with IPv6 and have run into an issue configuring ip6tables on our main router in order to control what can come into the network. A default DROP rule in the FORWARD section has worked well (obviously leaving ESTABLISHED,RELATED as ACCEPT) to keep internal clients' open ports from being accessed. However, running an ip6tables command for every little change is unwieldy. Whilst we are able to continue creating rules manually, I'm wondering if there's some sort of management interface we could use to create the rules quickly and easily. We're looking to be able to save time working on our firewall as well as providing a simple method for modifying rules for those who will eventually replace us. I know webmin (heavily locked down on our network, naturally) has support for modifying iptables rules, but seemingly no support for ip6tables. Something similar would be fantastic. Alternatively, suggestions for a firewall solution apart from iptables/ip6tables which can be managed remotely wouldn't be out of order. A web interface for management is certainly preferable, even if it is just a wrapper with shiny buttons over the raw config files.

  Read the article

• scan partition for bad blocks

  - by user22559

  Hello everyone I have a hard disk with bad sectors on it. I want to partition the drive so that the partitions are in the good part of the hard disk, and the parts that have bad sectors are not used. The first ~20GB of the hard disk are good. Then comes a ~13GB part that is riddled with bad sectors. After that, the hard disk is good again, but at the very end there is a ~2GB part with bad sectors. I have used an app called "Hdtune" to get this information, and I have created a 19GB c: partition at the beginning of the drive, then skipping the 13GB of bad sectors, then creating the D: partition that spans the rest of the disk, minus the last 2GB. The C: partition works well (i have been using it for a month and i have got no error whatsoever), but the D partition has been giving me problems. Somehow, it seems that I have some bad sectors in the D: partition. I am looking for an app that scans the HDD, finds the bad blocks, and shows them in a map so I can see if they are in the D partition. Or, an app that scans only a specified partition for bad sectors, and then shows in a map where the bad sectors are in the partition. I want to know this so I can resize the D partition so that it is outside of the bad area of the disk.

  Read the article

• Get Illegal Instruction error when booting Linux in VirtualBox, works fine when booted directly

  - by rkjnsn

  I have a computer on which I am dual booting Windows 7 and Gentoo Linux (both 64-bit). I want to be able to load up my Linux installation in a VM while I am booted into Windows. I have installed VirtualBox and followed the instructions for creating a raw disk VMDK. When I start the VM, Linux starts booting, but then fails with the following error when unlocking my root partition: truecrypt[441] trap invalid opcode ip:373615538e0 sp:3dd0e0dfb60 error:0 in libpixman-1.so.0[373614d6000+8d000] Everything works fine when I boot into Linux directly. What could cause an illegal instruction to be hit in libpixman only when booting in VirtualBox? Update: As a troubleshooting step, I recompiled pixman without "-march", and no longer get an illegal instruction error in that library. (The boot fails in the same spot with the same error in a different library, however.) How can I determine the specific opcode that isn't working in VirtualBox so I can disable it in my CFLAGS without having to disable all CPU-specific optimizations? I am still confused as to why there would be any user-mode instruction that would fail to work in a VM. Is this a known limitation? My CPU is an Intel Core i7 3720QM, and I have hardware virtualization support enabled.

  Read the article

• Deciphering an IIS6 Httperr log file

  - by smackaysmith

  We have a Windows 2003 R2 SP2 server with iis6 that is creating a 1024kb httperr file every minute. I can't figure out what I'm looking at. Here's a snippet: 2010-03-24 13:15:05 10.53.2.35 1667 10.53.2.12 80 HTTP/1.1 PUT /hserver.dll?&V01|&IMAC=0080646077AB|CID=32|CN=LWT0080646077AB|ED=1|IP=10.53.2.35|SM=255.255.255.0|GW=10.53.2.1|SN=10.53.2.255|DM=logs.com|1D=10.53.2.12|2D=10.101.2.12|0D=1|AL=/usr/sbin/netxserv|AV=4.1.0.0|CP=VIAüEstherüprocessorüü800MHz|CPS=800|RM=190512|B1=1.18|PD2=1024x768x16ü@ü60Hz|IM=6.6.2-02|CI=3600|SN#=6KHDG301300|OS=23|VI=1|P1=24|TZO=-301|TZ=CDT|FS=128|MD=2003-04|CO=|LO=|AP0=BaseüSystem|NA|6.6.2-02|AP1=RapportüAgent|NA|4.1.0-3.26|AP2=TrueType|NA|6.8.0-3.4|AP3=WebFonts|NA|2.0.4-3.6|AP4=TrueTypeüFonts|NA|6.8.0-3.5|AP5=Network_login|NA|1.0.0-1.0.3|AP6=ScreenüSaver|NA|3.13|AP7=DMonitor|NA|1.0.0-0.4.0|AP8=MozillaüFirefox_15|NA|1.5.0.8-3.6|AP9=RemoteüShadow|NA|3.17|AP10=RemoteüDesktop|NA|1.6.0-1.0|AP11=SNMP|NA|5.1.3.1-3.13|AP12=LinuxüPrinting|NA|3.8.27-3.33|AP13=SSH|NA|3.8.1-3.25|AP14=ThinPrint|NA|6.2.87-0.2|AP15=XDMCP|NA|6.8.0-3.29|AP16=Ericom|NA|8.2.0-3.29|AP17=Daylightüsavingütimeüupdate|NA|1.1.0-1.0.0| 411 - LengthRequired - What on earth am I looking at? Nothing in the system or app logs. Finally, in iis manager, Default Web Site label has boxes instead of spaces. Very odd.

  Read the article

• What are some techniques to monitor multiple instances of a piece of software?

  - by Geo Ego

  It was recommended that I ask this question here by a member of StackOverflow. I have a piece of self-serve kiosk software that will be running at multiple sites. I'd like to monitor their status remotely. The kiosk application itself is pretty much finished. I am now in the process of creating a piece of software that will monitor all of the kiosks from a central location so that the customer can view particular details remotely (for instance, how many bills are in the acceptor's cash cartridge, what customer is currently logged in, etc.). Because I am in such an early stage of development, my options are quite open. I understand that I'm not giving very many qualifications, but I'd like to try to get a good variety of potential solutions. Some details: Kiosk software is a VB6 app running on Windows Embedded Monitoring software will be run on a modern desktop version of Windows (either XP, Vista, or 7) Database is SQL Server 2008 My initial idea was to develop a .NET app that would simply report the last database transaction for each kiosk at a set interval (say every second or so) but I'd really like for the kiosk software to report its status in real-time. I'm not exactly sure where to begin in terms of what modifications may need to be made to the kiosk software, and what the monitoring software will require. Links to articles on these topics would be most welcome.

  Read the article

• Does visual source safe take .cvsignore as configuration ?

  - by superuser

  An easy way to tell CVS to ignore these directories is to create a file named .cvsignore (note the leading period) in your top-level source directory Has anyone verified this with vss? Plus,does vss have these similar command lines: * To refresh the state of your source code to that stored in the the source repository, go to your project source directory, and execute cvs update -dP. * When you create a new subdirectory in the source code hierarchy, register it in CVS with a command like cvs add {subdirname}. * When you first create a new source code file, navigate to the directory that contains it, and register the new file with a command like cvs add {filename}. * If you no longer need a particular source code file, navigate to the containing directory and remove the file. Then, deregister it in CVS with a command like cvs remove {filename}. * While you are creating, modifying, and deleting source files, changes are not yet reflected in the server repository. To save your changes in their current state, go to the project source directory and execute cvs commit. You will be asked to write a brief description of the changes you have just completed, which will be stored with the new version of any updated source file.

  Read the article

• Configuring https access on HP A5120 Switch

  - by GerryEgan

  I am trying to configure HTTPS management on a HP a5120 switch running Version 5.20.99, Release 2215 and not having much luck. I have followed the manual by creating an SSL policy first and then enabling the HTTPS server with the SSL policy: ssl server-policy sslpol ip https ssl-server-policy sslpol ip https enable When I try and log onto the switch with Google Chrome I get the following error: Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. When I look this up I have found references to errors due to TLS being used in SSL. I can find no way to specify the SSL version in the server policy. The manual has a configuration example that uses MSCEP to retrieve a certificate but in Windows 2008 R2 that feature is only available in Enterprise and Datacentre editions which I don't have. I have SSH configured and it is using a locally generated certificate so I'm not sure if I can use that but I'd like to if possible. Has anybody been able to setup HTTPS management on HP A series switches without MSCEP? Any and all help appreciated! here is a copy of my config with the interfaces removed: version 5.20.99, Release 2215 # sysname MYSYSNAME # irf domain 10 irf mac-address persistent timer irf auto-update enable undo irf link-delay # domain default enable system # telnet server enable # vlan 1 # vlan 100 description Management # radius scheme system primary authentication 127.0.0.1 1645 primary accounting 127.0.0.1 1646 user-name-format without-domain # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher authorization-attribute level 3 service-type ssh telnet terminal service-type web # stp enable # ssl server-policy sslpol pki-domain MYDOMAIN # interface NULL0 # interface Vlan-interface199 ip address 192.168.199.140 255.255.255.0 # interface GigabitEthernet1/0/1 poe enable stp edged-port enable # interface Ten-GigabitEthernet2/1/2 # dhcp-snooping # ntp-service unicast-server 192.168.1.71 # ssh server enable # ip https ssl-server-policy sslpol ip https enable # load xml-configuration # user-interface aux 0 1 user-interface vty 0 15 authentication-mode scheme

  Read the article

• One Active Directory, Multiple Remote Desktop Services (Server 2012 solution)

  - by Trinitrotoluene

  What I am trying to do is quite complex, so I figured I'd throw it out to a wider audience to see if anyone can find a flaw. What I am trying to do (as an MSP/VAR) is design a solution that will give multiple companies a session based remote desktop (companies that need to be kept completely seperate), using only a handful of servers. This is how I imagine it at the moment: CORE SERVER - Server 2012 Datacentre (All below are HyperV servers) Server1: Cloud-DC01 (Active Directory Domain Services for mycloud.local) Server2: Cloud-EX01 (Exchange Server 2010 running multi tenant mode) Server3: Cloud-SG01 (Remote Desktop Gateway) CORE SERVER 2 - Server 2012 Datacentre (All below are HyperV servers) Server1: Cloud-DC02 (Active Directory Domain Services for mycloud.local) Server2: Cloud-TS01 (Remote Desktop Session Host for Company A) Server3: Cloud-TS02 (Remote Desktop Session Host for Company B) Server4: Cloud-TS03 (Remote Desktop Session Host for Company C) What I thought about doing was setting up each Organisation in their own OU (perhaps creating their OU structure based on the Excahnge 2010 tenant OU structure so the accounts are linked). Each company would get a Remote Desktop Session Host server that would also serve as a file server. This server would be seperated from the rest on its own range. The server Cloud-SG01 would have access to all these networks and route the traffic to the appropriate network when a client connects and authenticated so they are pushed onto the correct server (Based on session collections in 2012). I won't lie this is something I have come up with quite quickly so there may well be something gapingly obvious that I am missing. Any feedback would be appreciated.

  Read the article

• Is wiper.sh working?

  - by Aleksander Blomskøld

  I'm setting up a server running Ubuntu Precise, and I'm trying to verify if SSD TRIM is working. fstrim is failing: ~ sudo fstrim -v / fstrim: /: FITRIM ioctl failed: Operation not supported So I tried wiper.sh in hdparm: wiper-3.5 sudo ./wiper.sh --verbose --commit /dev/sda1 wiper.sh: Linux SATA SSD TRIM utility, version 3.5, by Mark Lord. rootdev=/dev/sda1 fsmode2: fsmode=read-write /: fstype=ext4 freesize = 169502088 KB, reserved = 1695020 KB Preparing for online TRIM of free space on /dev/sda1 (ext4 mounted read-write at /). This operation could silently destroy your data. Are you sure (y/N)? y Creating temporary file (167807068 KB).. Syncing disks.. Beginning TRIM operations.. get_trimlist=/sbin/hdparm --fibmap WIPER_TMPFILE.11503 /dev/sda: trimming 3211263 sectors from 64 ranges succeeded trimming 3571713 sectors from 64 ranges succeeded trimming 3915776 sectors from 64 ranges succeeded (...) trimming 3657913 sectors from 60 ranges succeeded Removing temporary file.. Syncing disks.. Done. It seems to be working, but I'm wondering if it really is. Are there any cases where wiper.sh should work when fstrim isn't? Is there any way I can check if the TRIMing actually has succeeded (other than trusting the wiper.sh-log)?

  Read the article

• How to convert a raw disk image to a copy-on-write image based on another image for use with kvm and

  - by Jean-Paul Calderone

  I have a virtual Windows machine running on kvm. Presently it has a 90GB raw disk image. I would like to clone this VM without having to keep two copies of the 90GB raw disk image around. It seems like a good approach for doing this is to make two new qcow or qcow2 images based on the original. First I converted the raw image to a qcow2 image: qemu-img convert -O qcow2 basewindowsxp.img basewindowsxp.qcow2 Then I tried creating a new image backed by this: qemu-img create -F qcow2 -f qcow2 -b `pwd`/basewindowsxp.qcow2 windowsxp-1.qcow2 Then I used virt-manager to point the original VM at windowsxp-1.qcow2. However, when I try to start up the VM in this new configuration, virt-manager reports an error: Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/engine.py", line 588, in run_domain vm.startup() File "/usr/share/virt-manager/virtManager/domain.py", line 150, in startup self._backend.create() File "/usr/lib/python2.6/dist-packages/libvirt.py", line 300, in create if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self) libvirtError: internal error unable to start guest: qemu: could not open disk image /var/lib/libvirt/images/windowsxp-1.qcow2 The error suggests that the filename was misspecified or that the filesystem permissions are too restrictive, but neither of these is the case: $ ls -l /var/lib/libvirt/images/windowsxp-1.qcow2 -rwxrwxrwx 1 root root 262144 2010-05-27 08:32 /var/lib/libvirt/images/windowsxp-1.qcow2 Why won't virt-manager start this vm?

  Read the article

• Removing forward lookup zone broke our site - why?

  - by user102469

  I'm fairly new to the job and trying to get to grips with the infrastructure here. We've moved a site from being locally hosted on our own network to an external host (1&1). I've transferred the DNS hosting from the previous DNS host to 1&1 to keep things simple. Once everything had gone through, visitors that were external to our network were being directed to the new site on 1&1 but requests from within our network were still going to our own server. I noticed in the DNS server that there was a forward lookup zone for the site pointing to our own server still. My (admittedly simplistic) understanding was that pausing that zone would then cause the DNS server to get the address for the site from our external DNS servers and our users would start landing on our new site. However, what happened instead was that they were being met with "page not found" type errors. I've resolved it my modifying the forward lookup zone A record to point to the external web server but would like to get an understanding as to why pausing the zone didn't work. Would deleting the zone work? I am reluctant to try that as creating it again will not be as easy as simply pressing "start". Many thanks.

  Read the article

• OS X: Storing MySQL data securely, on an encrypted FileVault image using a soft link

  - by GJ

  I am trying to get a macports-installed MySQL to use a data directory stored inside my FileVault-protected home dir. I used sudo cp -a /opt/local/var/db/mysql5 ~/db/ (the -a to ensure file permissions remain intact) and then replaced the original mysql5 directory with a soft link: sudo ln -s ~/db/mysql5 /opt/local/var/db/mysql5 However, when I now try to start MySQL it fails. It follows the soft link at least to the extent that it modifies some files in the ~/db/mysql5 dir, notably the error log which gets appended to it this: 110108 15:33:08 mysqld_safe Starting mysqld daemon with databases from /opt/local/var/db/mysql5 110108 15:33:08 [Warning] '--skip-locking' is deprecated and will be removed in a future release. Please use '--skip-external-locking' instead. 110108 15:33:08 [Warning] '--log_slow_queries' is deprecated and will be removed in a future release. Please use ''--slow_query_log'/'--slow_query_log_file'' instead. 110108 15:33:08 [Warning] '--default-character-set' is deprecated and will be removed in a future release. Please use '--character-set-server' instead. 110108 15:33:08 [Warning] Setting lower_case_table_names=2 because file system for /opt/local/var/db/mysql5/ is case insensitive 110108 15:33:08 [Note] Plugin 'FEDERATED' is disabled. 110108 15:33:08 [Note] Plugin 'ndbcluster' is disabled. /opt/local/libexec/mysqld: Table 'mysql.plugin' doesn't exist 110108 15:33:08 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110108 15:33:09 InnoDB: Started; log sequence number 4 1596664332 110108 15:33:09 [ERROR] /opt/local/libexec/mysqld: Can't create/write to file '/opt/local/var/db/mysql5/mac.local.pid' (Errcode: 13) 110108 15:33:09 [ERROR] Can't start server: can't create PID file: Permission denied 110108 15:33:09 mysqld_safe mysqld from pid file /opt/local/var/db/mysql5/gPod.local.pid ended I can't see why MySQL can't create the pid file, since manually creating it using the _mysql user succeeds (sudo -u _mysql touch mac.local.pid from inside ~/db/mysql5) Any ideas how to resolve this?

  Read the article

• How can I add subdomains of default accepted domain of Exchange 2010

  - by Christoph

  I have an Exchange 2010 that has several accepted domains. Now I want this server to accept - besides the default SMTP domain - all subdomains of the default domain. The documentation in Technet states When you create an accepted domain, you can use a wildcard character (*) in the address space to indicate that all subdomains of the SMTP address space are also accepted by the Exchange organization. For example, to configure Contoso.com and all its subdomains as accepted domains, enter *.Contoso.com as the SMTP address space. It is, however not possible to add e. g. *.contoso.com if contoso.com is already configured. Exchange complains in this case that the domain is already configured. It is also not possible to edit the "value", i. e. the domain name of an accepted domain. I know that I cannot modify the default accepted domain, but changing it to another does not help either, because the domain name itself can never be edited. The last idea was deleting the accepted domain and re-creating it with "*." prepended. This is, however, also impossible because it is of course not possible to delete or modify the default address policy and if a domain name is used in an address template it cannot be removed from the accepted domains. The question is: How can I make my Exchange 2010 server accept any subdomain of its default accepted domain with a wildcard?

  Read the article

• Tcpreplaying using VMware

  - by Methos

  This is more like a testbed setup question. I want to use VMware to debug some networking code in the linux kernel in the VM. My VM has two network interfaces. What I want to do is replay the capture file in the host and receive the packets in the VM. My problem is I do not see replayed packets in the VM. I am running VMware and tcpreplay on the host as sudo. Hence I think there should not be any problem access devices files. I am running VMware workstation 7.0 a. I first began with Custom networking as that provides option of creating your own virtual network name. I wrote /dev/vmnet3 and /dev/vmnet4 for the two interfaces respectively. However, after booting the guest, I did not see any of these interfaces or devices files (in /dev) created on the host. b. Then I tried 'Host Only', but that does not show what bridge/device file is associated with the interface. c. Finally I tried bridged networking mode. I see vmnet1, vmnet8 and vboxnet0 on the host. I have tcpreplayed the capture file on each of these interfaces, for all the above three cases. I tried to capture packets in the VM using "tcpdump -i any". However, I do not see any packets. Any ideas/pointers?

  Read the article

• Attempting to set up xampp and zend server on the same machine

  - by umbregachoong

  I am attempting to set up the zend server and xampp on the same machine but I am running into problems. I came across documentation on the zend site that said you cannot do this. However the folks over at apachefriends said you can. I have since discovered that I can run some of the zendframework examples within xampp by downloading the zendframework2 library and the skeleton app from git and I am doing this right now. However, I would like to know how to set them both up without having any conflicts both for the apache2 server and phpmyadmin. (One of the frustrating things is trying to load phpmyadmin in the deployment dialog by using the zpk tool in Zend). What I did in trying to set up both servers on windows 7 is as follows: First I have tried to set up the httpd conf files separately for each server, xampp running on port 8082 , and zend running on port 8088. At the time xampp would work, but zend server would not. This is after setting up the virtual host files separately for each server. Question 1: Where are the zend server error logs? Earlier, I was able to get both of them running configuring the xampp server httpd-conf file alone, however, I experienced problems with phpmyadmin even after configuring phpmyadmin on xampp to work on a different port other than 3306. Second question here: how to set up the two mysql phpmyadmin instances so they do not conflict with each other? Here is the xampp virtual host section: ##ServerAdmin [email protected] DocumentRoot "C:/xampp/htdocs/" ServerName localhost 8082 ##ServerAlias www.dummy-host.example.com ##ErrorLog "logs/dummy-host.example.com-error.log" ##CustomLog "logs/dummy-host.example.com-access.log" common Here is the zend virtual host section: DocumentRoot "C:\Program Files (x86)\Zend\Apache2/htdocs" ServerName localhost:8088 </VirtualHost> I have looked at this httpd.apache.org/docs/2.2/vhosts/ and this http://survivethedeepend.com/zendframeworkbook/en/1.0/creating.a.local.domain.using.apache.virtual.hosts but I am obviously doing something wrong here. I also have the java sdk running on this machine with tomcat and apache and I have no conflicts- too bad this is not the case for zend server and xampp Thanks umbre gachoong

  Read the article

• What is the difference between the Linux and Linux LVM partition type?

  - by ujjain

  Fdisk shows multiple partition types. What is the difference between choosing 83) Linux and 8e) Linux LVM? Choosing 83) Linux also works fine for using LVM, even creating a physical volume on /dev/sdb without a partition table works. Does picking a partition type in fdisk really matter? What is the difference in picking Linux or Linux LVM as partition type? [root@tst-01 ~]# fdisk /dev/sdb WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): l 0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris 1 FAT12 39 Plan 9 82 Linux swap / So c1 DRDOS/sec (FAT- 2 XENIX root 3c PartitionMagic 83 Linux c4 DRDOS/sec (FAT- 3 XENIX usr 40 Venix 80286 84 OS/2 hidden C: c6 DRDOS/sec (FAT- 4 FAT16 <32M 41 PPC PReP Boot 85 Linux extended c7 Syrinx 5 Extended 42 SFS 86 NTFS volume set da Non-FS data 6 FAT16 4d QNX4.x 87 NTFS volume set db CP/M / CTOS / . 7 HPFS/NTFS 4e QNX4.x 2nd part 88 Linux plaintext de Dell Utility 8 AIX 4f QNX4.x 3rd part 8e Linux LVM df BootIt 9 AIX bootable 50 OnTrack DM 93 Amoeba e1 DOS access a OS/2 Boot Manag 51 OnTrack DM6 Aux 94 Amoeba BBT e3 DOS R/O b W95 FAT32 52 CP/M 9f BSD/OS e4 SpeedStor c W95 FAT32 (LBA) 53 OnTrack DM6 Aux a0 IBM Thinkpad hi eb BeOS fs e W95 FAT16 (LBA) 54 OnTrackDM6 a5 FreeBSD ee GPT f W95 Ext'd (LBA) 55 EZ-Drive a6 OpenBSD ef EFI (FAT-12/16/ 10 OPUS 56 Golden Bow a7 NeXTSTEP f0 Linux/PA-RISC b 11 Hidden FAT12 5c Priam Edisk a8 Darwin UFS f1 SpeedStor 12 Compaq diagnost 61 SpeedStor a9 NetBSD f4 SpeedStor 14 Hidden FAT16 <3 63 GNU HURD or Sys ab Darwin boot f2 DOS secondary 16 Hidden FAT16 64 Novell Netware af HFS / HFS+ fb VMware VMFS 17 Hidden HPFS/NTF 65 Novell Netware b7 BSDI fs fc VMware VMKCORE 18 AST SmartSleep 70 DiskSecure Mult b8 BSDI swap fd Linux raid auto 1b Hidden W95 FAT3 75 PC/IX bb Boot Wizard hid fe LANstep 1c Hidden W95 FAT3 80 Old Minix be Solaris boot ff BBT 1e Hidden W95 FAT1 Command (m for help):

  Read the article

• How do I delete hardlinks, symbolic links, junction points, etc please?

  - by jonny

  I could be wrong, but I'm yet to hear a valid argument for the exploitability that these things deliver...outweighing their very dubious / debatable functionality. They seem to me to be marginally handy, but I don't think I have any need for them. I do have a need for security, however. How can I delete their entire functionality permanently from my hard drive, please? Microsoft only has pages on how to create them; which seems almost peculiar to the point of being dubious (at least, to me...) And just a dumb command line question, am I correct in assuming fsutil hardlink list c: will enumerate every single hardlink on that drive? C:\Windows\system32>fsutil hardlink list c: \Windows\System32 Also, how do I delete symbolic links please ;) But I'd just rather have all symbolic linking and recursion-creating stuff removed, if that's possible? C:\Windows\system32>fsutil behavior query symlinkevaluation Local to local symbolic links are enabled. Local to remote symbolic links are enabled. Remote to local symbolic links are disabled. Remote to remote symbolic links are disabled.

  Read the article

• How would I setup iMail to forward a user's mail to another service w/o leaving a copy locally?

  - by Scott Mayfield

  I have an iMail 2006 server installation in which I have a particular user that has several aliases that all point to a single user (me, for the record). I've been copying all of my mail to GMail and reading it there, but it annoys me that I have to go back weekly and log into my mail account on iMail and delete between 6 and 10 thousand copies of messages I've already received, in order to keep my mailbox from filling up (yes, I have it set with no quota, but I consider it bad form to just let the box grow indefinitely). I've got the copying setup via an inbound user rule, but I'm wondering how to accomplish a "copy and delete" rule. The manual isn't clear on what happens with multiple matching rules (will they be processed in order, or is it a first match situation?) and there isn't a means to combine multiple actions into a single rule. If I use the "forward" action, I THINK that it's going to screw up all the sender information once the mail reaches my GMail account and show it as coming from me instead of the original senders (can anyone confirm that this is accurate?) An easy answer would be to delete my user account entirely, replace it with an alias that maps to my GMail account, but then I would lose my ability to log into the system for admin duties. So that leads me to creating a second, lesser known account for admin use, but since it's a real account, sooner or later I'm going to get mail sent to it and I'll be back to the same situation of having a user account that doesn't get emptied periodically. I imagine I can set the quota to 0 MB to cause all incoming mail to my admin account to bounce, or setup an inbound rule to bounce everything, but this is starting to sound kludgy to me. Does anyone know of a more direct work around to copying a user's incoming mail to an outside server and then deleting the local copy w/o removing their account entirely? Or is this just wishful thinking? Thanks in advance. Scott

  Read the article

< Previous Page | 450 451 452 453 454 455 456 457 458 459 460 461  | Next Page >