Search Results

Search found 15621 results on 625 pages for 'creating'.

Page 455/625 | < Previous Page | 451 452 453 454 455 456 457 458 459 460 461 462  | Next Page >

• Assistance on setup to Connect an offsite server to the LAN via RRAS VPN - Server 2008 R2

  - by Paul D'Ambra

  I have an office LAN protected using a Zyxel Zywall USG 300. I've set up an L2TP/ipsec VPN on that which accepts connections using a shared secret and I've tested this from multiple clients. I have a server offsite and want to set up RRAS to use a persistent connection to the VPN so that it can carry out network jobs even with no one logged in (I'm using it for Micorosft DPM secondary backup). If I create a vpn as if I were setting up a users laptop it can dial in no problem but if I set up a demand dial interface in RRAS it errors. I enable RRAS ticking only demand dial interface (branch office routing) Select network interfaces, right click and choose new demand dial interface Name the VPN ToCompany Select connect using VPN And then L2TP as the vpn type enter the IP address (double-checked for typos!) select Route IP packets on this interface specify static route to remote network as 10.0.0.0/24 with metric of 1 add dial out credentials (again double checked for typos and confirmed with other vpn connections click finish now I right-click on the new interface and choose properties and then the security tab I change Data encryption to optional select only PAP for Authentication (both as per manufacturer of Zywall) click advanced settings against type of vpn and set shared secret then I select the new interface, right-click and choose connect this dials and then errors with either 720 or 811 as the error codes. However, if I create a VPN by going to Network & Sharing center and setting up as if I was creating a VPN from my laptop to the office (say) it dials successfully so I know the VPN settings are correct and the machine can connect to the VPN. Suggests very strongly the problem is how I'm setting up RRAS. Can anyone help?

  Read the article

• OS X: Storing MySQL data securely, on an encrypted FileVault image using a soft link

  - by GJ

  I am trying to get a macports-installed MySQL to use a data directory stored inside my FileVault-protected home dir. I used sudo cp -a /opt/local/var/db/mysql5 ~/db/ (the -a to ensure file permissions remain intact) and then replaced the original mysql5 directory with a soft link: sudo ln -s ~/db/mysql5 /opt/local/var/db/mysql5 However, when I now try to start MySQL it fails. It follows the soft link at least to the extent that it modifies some files in the ~/db/mysql5 dir, notably the error log which gets appended to it this: 110108 15:33:08 mysqld_safe Starting mysqld daemon with databases from /opt/local/var/db/mysql5 110108 15:33:08 [Warning] '--skip-locking' is deprecated and will be removed in a future release. Please use '--skip-external-locking' instead. 110108 15:33:08 [Warning] '--log_slow_queries' is deprecated and will be removed in a future release. Please use ''--slow_query_log'/'--slow_query_log_file'' instead. 110108 15:33:08 [Warning] '--default-character-set' is deprecated and will be removed in a future release. Please use '--character-set-server' instead. 110108 15:33:08 [Warning] Setting lower_case_table_names=2 because file system for /opt/local/var/db/mysql5/ is case insensitive 110108 15:33:08 [Note] Plugin 'FEDERATED' is disabled. 110108 15:33:08 [Note] Plugin 'ndbcluster' is disabled. /opt/local/libexec/mysqld: Table 'mysql.plugin' doesn't exist 110108 15:33:08 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110108 15:33:09 InnoDB: Started; log sequence number 4 1596664332 110108 15:33:09 [ERROR] /opt/local/libexec/mysqld: Can't create/write to file '/opt/local/var/db/mysql5/mac.local.pid' (Errcode: 13) 110108 15:33:09 [ERROR] Can't start server: can't create PID file: Permission denied 110108 15:33:09 mysqld_safe mysqld from pid file /opt/local/var/db/mysql5/gPod.local.pid ended I can't see why MySQL can't create the pid file, since manually creating it using the _mysql user succeeds (sudo -u _mysql touch mac.local.pid from inside ~/db/mysql5) Any ideas how to resolve this?

  Read the article

• Configuring https access on HP A5120 Switch

  - by GerryEgan

  I am trying to configure HTTPS management on a HP a5120 switch running Version 5.20.99, Release 2215 and not having much luck. I have followed the manual by creating an SSL policy first and then enabling the HTTPS server with the SSL policy: ssl server-policy sslpol ip https ssl-server-policy sslpol ip https enable When I try and log onto the switch with Google Chrome I get the following error: Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. When I look this up I have found references to errors due to TLS being used in SSL. I can find no way to specify the SSL version in the server policy. The manual has a configuration example that uses MSCEP to retrieve a certificate but in Windows 2008 R2 that feature is only available in Enterprise and Datacentre editions which I don't have. I have SSH configured and it is using a locally generated certificate so I'm not sure if I can use that but I'd like to if possible. Has anybody been able to setup HTTPS management on HP A series switches without MSCEP? Any and all help appreciated! here is a copy of my config with the interfaces removed: version 5.20.99, Release 2215 # sysname MYSYSNAME # irf domain 10 irf mac-address persistent timer irf auto-update enable undo irf link-delay # domain default enable system # telnet server enable # vlan 1 # vlan 100 description Management # radius scheme system primary authentication 127.0.0.1 1645 primary accounting 127.0.0.1 1646 user-name-format without-domain # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher authorization-attribute level 3 service-type ssh telnet terminal service-type web # stp enable # ssl server-policy sslpol pki-domain MYDOMAIN # interface NULL0 # interface Vlan-interface199 ip address 192.168.199.140 255.255.255.0 # interface GigabitEthernet1/0/1 poe enable stp edged-port enable # interface Ten-GigabitEthernet2/1/2 # dhcp-snooping # ntp-service unicast-server 192.168.1.71 # ssh server enable # ip https ssl-server-policy sslpol ip https enable # load xml-configuration # user-interface aux 0 1 user-interface vty 0 15 authentication-mode scheme

  Read the article

• How would I setup iMail to forward a user's mail to another service w/o leaving a copy locally?

  - by Scott Mayfield

  I have an iMail 2006 server installation in which I have a particular user that has several aliases that all point to a single user (me, for the record). I've been copying all of my mail to GMail and reading it there, but it annoys me that I have to go back weekly and log into my mail account on iMail and delete between 6 and 10 thousand copies of messages I've already received, in order to keep my mailbox from filling up (yes, I have it set with no quota, but I consider it bad form to just let the box grow indefinitely). I've got the copying setup via an inbound user rule, but I'm wondering how to accomplish a "copy and delete" rule. The manual isn't clear on what happens with multiple matching rules (will they be processed in order, or is it a first match situation?) and there isn't a means to combine multiple actions into a single rule. If I use the "forward" action, I THINK that it's going to screw up all the sender information once the mail reaches my GMail account and show it as coming from me instead of the original senders (can anyone confirm that this is accurate?) An easy answer would be to delete my user account entirely, replace it with an alias that maps to my GMail account, but then I would lose my ability to log into the system for admin duties. So that leads me to creating a second, lesser known account for admin use, but since it's a real account, sooner or later I'm going to get mail sent to it and I'll be back to the same situation of having a user account that doesn't get emptied periodically. I imagine I can set the quota to 0 MB to cause all incoming mail to my admin account to bounce, or setup an inbound rule to bounce everything, but this is starting to sound kludgy to me. Does anyone know of a more direct work around to copying a user's incoming mail to an outside server and then deleting the local copy w/o removing their account entirely? Or is this just wishful thinking?

  Read the article

• Different approaches to share files over local network & playlists "collaboration"

  - by exTyn

  I know, that I can use Google to find methods to share files over local network [1]. But, I have never shared files over local network, and I want to do this in a good, professional way. Also, this could be a good community wiki, I think. Well, what I am asking for, is: what are pros and cons of different methods to sharing files ofver local network? In my case, I need to share files between Linux & Win 7, and I want it to be secure (= without access for anyone else but me & people in my room). Another question (connected with above topic) is about playing music over the local network. Let's say, I live with 2 other guys in a room, one of us have speakers and we want to collaborate in creating playlists (e.g. everyone is choosing 3 songs to be played). Is it possible? How to do this? I am asking this question on SuperUser, because it (question) is connected with hardware & software (network, connecting computers, software for managing playlists in network etc.). I think it is most accurate place for such question (I have considered SO and SF). [1] And I have already done this! But, I do not have an experience in this field (sharing files over local network), do I am asking about pros and cons.

  Read the article

• How to open semicolon delimited CSV-files in US-version of Excel

  - by Holgerwa

  When I double-click on a .csv file, it is opened in Excel. The csv-files have columns delimited with semicolons (not commas, but also a valid format). Using a German Windows/Excel setup, the opened file is displayed correctly, the columns are separated where the semicolons existed in the csv-file. But when I do the same on an (US-) English Windows/Excel setup, only one column is imported, showing the whole data including the semicolons in the first column. (I don't have an English setup available for tests, users have reported the behavior) I tried to change the list separator value in Windows regional settings, but that didn't change anything. What can I do to be able to double-click-open those CSV-files on an English setup? EDIT: It seems to be the best solution not to rely on CSV-files in this case. I was hoping that there is some formatting for CSV-files that makes it possible to use them internationally. The best solution seems that I'll switch to creating XLS-files. Thanks to all for your suggestions and helpful tips!

  Read the article

• Compressing and copying large files on Windows Server?

  - by Aaron

  I've been having a hard time copying large database backups from the database server to a test box at another site. I'm open to any ideas that would help me get this database moved without having to resort to a USB hard drive and the mail. The database server is running Windows Server 2003 R2 Enterprise, 16 GB of RAM and two quad-core 3.0 GHz Xeon X5450s. Files are SQL Server 2005 backup files between 100 GB and 250 GB. The pipe is not the fastest and SQL Server backup files typically compress down to 10-40% of the original, so it made sense to me to compress the files first. I've tried a number of methods, including: gzip 1.2.4 (UnxUtils) and 1.3.12 (GnuWin) bzip2 1.0.1 (UnxUtils) and 1.0.5 (Cygwin) WinRAR 3.90 7-Zip 4.65 (7za.exe) I've attempted to use WinRAR and 7-Zip options for splitting into multiple segments. 7za.exe has worked well for me for database backups on another server, which has ~50 GB backups. I've also tried splitting the .BAK file first with various utilities and compressing the resulting segments. No joy with that approach either- no matter the tool I've tried, it ends up butting against the size of the file. Especially frustrating is that I've transferred files of similar size on Unix boxes without problems using rsync+ssh. Installing an SSH server is not an option for the situation I'm in, unfortunately. For example, this is how 7-Zip dies: H:\dbatmp>7za.exe a -t7z -v250m -mx3 h:\dbatmp\zip\db-20100419_1228.7z h:\dbatmp\db-20100419_1228.bak 7-Zip (A) 4.65 Copyright (c) 1999-2009 Igor Pavlov 2009-02-03 Scanning Creating archive h:\dbatmp\zip\db-20100419_1228.7z Compressing db-20100419_1228.bak System error: Unspecified error

  Read the article

• How to configure IIS 7.5 to allow special chars in Url for ASP.NET 3.5?

  - by Sebastian P.R. Gingter

  I'm trying to configure my IIS 7.5 to allow specials chars in the url for ASP.NET. This is important to support wide-spread legacy url's on a new system. Sample url: http://mydomain.com/FileWith%inTheName.html This would be encoded in the url and requested as http://mydomain.com/FileWith25%inTheName.html This simply works, when creating a new web in IIS 7.5, placing a file with the percentage sign in the file name in the web root and pointing the browser to it. This does not work, however, when the web site is an ASP.NET application. ASP.NET always returns a 400.0 - Bad Request error in the WindowsAuthentication module from the StaticFile handler, when pointing to that url. It however displays the requested url correctly and also resolves correctly to the correct physical file (the information from the field 'Physical Path' from the Server error page points to the physically available file). There are hints on how to enable this, so I followed the instructions on these websites step by step: http://dirk.net/2008/06/09/ampersand-the-request-url-in-iis7/ http://adorr.net/2010/01/configure-iis-to-accept-url-with-special-characters.html The second one actually sums up the information from the first post and adds some more information about x64 systems (we're running x64) and on an additional web.config change for this. I tried all that, and still can't get this running from an asp.net web application. And yes: I rebooted after applying the registry changes. So, what do I have to do in addition to the settings described in above posts, to support the legacy url's which contain percentage characters? Additional info: Application Pool mode is integrated. Push after some days. No idea anyone?

  Read the article

• Attempting to set up xampp and zend server on the same machine

  - by umbregachoong

  I am attempting to set up the zend server and xampp on the same machine but I am running into problems. I came across documentation on the zend site that said you cannot do this. However the folks over at apachefriends said you can. I have since discovered that I can run some of the zendframework examples within xampp by downloading the zendframework2 library and the skeleton app from git and I am doing this right now. However, I would like to know how to set them both up without having any conflicts both for the apache2 server and phpmyadmin. (One of the frustrating things is trying to load phpmyadmin in the deployment dialog by using the zpk tool in Zend). What I did in trying to set up both servers on windows 7 is as follows: First I have tried to set up the httpd conf files separately for each server, xampp running on port 8082 , and zend running on port 8088. At the time xampp would work, but zend server would not. This is after setting up the virtual host files separately for each server. Question 1: Where are the zend server error logs? Earlier, I was able to get both of them running configuring the xampp server httpd-conf file alone, however, I experienced problems with phpmyadmin even after configuring phpmyadmin on xampp to work on a different port other than 3306. Second question here: how to set up the two mysql phpmyadmin instances so they do not conflict with each other? Here is the xampp virtual host section: ##ServerAdmin [email protected] DocumentRoot "C:/xampp/htdocs/" ServerName localhost 8082 ##ServerAlias www.dummy-host.example.com ##ErrorLog "logs/dummy-host.example.com-error.log" ##CustomLog "logs/dummy-host.example.com-access.log" common Here is the zend virtual host section: DocumentRoot "C:\Program Files (x86)\Zend\Apache2/htdocs" ServerName localhost:8088 </VirtualHost> I have looked at this httpd.apache.org/docs/2.2/vhosts/ and this http://survivethedeepend.com/zendframeworkbook/en/1.0/creating.a.local.domain.using.apache.virtual.hosts but I am obviously doing something wrong here. I also have the java sdk running on this machine with tomcat and apache and I have no conflicts- too bad this is not the case for zend server and xampp Thanks umbre gachoong

  Read the article

• Virtual machines with failover setup

  - by kimmmo

  We have three servers and our plan is to run a number of virtual machines on them in such manner, that if one of the nodes blow up, we can either quickly or seamlessly get a spare running on another node. In addition to the normal networking, they're interconnected via dual 10Gbit NIC's, so networked raid/mirroring shouldn't be a problem. The guest VM's are mostly going to be running text mode linux, but of course it wouldn't hurt to be able to spin up a non-mission critical windows guest for running Visual Studio or checking IE compatibility of a web app. We've spent some time trying to get some magical cloud setup running using Stackops and Crowbar but it started to look like they were offering way too much and were too complicated for our needs. The next candidate, I think, is Ubuntu 11.04 server + KVM + Ganeti + Drbd, unless you can come up with a suggestion for a better solution that we have missed. Requirements: Installation should be simple or at least understandable without being in the dev team A browser interface for creating and managing VM's is a nice bonus Single node's hardware failure should cause minimal downtime for VM's that were running on that node Adding more nodes should be possible without shutting down the VM's.

  Read the article

• OS X: MySQL not dealing properly with data directory via soft link

  - by GJ

  I am trying to get a macports-installed MySQL to use a data directory stored inside my FileVault-protected home dir. I used sudo cp -a /opt/local/var/db/mysql5 ~/db/ (the -a to ensure file permissions remain intact) and then replaced the original mysql5 directory with a soft link: sudo ln -s ~/db/mysql5 /opt/local/var/db/mysql5 However, when I now try to start MySQL it fails. It follows the soft link at least to the extent that it modifies some files in the ~/db/mysql5 dir, notably the error log which gets appended to it this: 110108 15:33:08 mysqld_safe Starting mysqld daemon with databases from /opt/local/var/db/mysql5 110108 15:33:08 [Warning] '--skip-locking' is deprecated and will be removed in a future release. Please use '--skip-external-locking' instead. 110108 15:33:08 [Warning] '--log_slow_queries' is deprecated and will be removed in a future release. Please use ''--slow_query_log'/'--slow_query_log_file'' instead. 110108 15:33:08 [Warning] '--default-character-set' is deprecated and will be removed in a future release. Please use '--character-set-server' instead. 110108 15:33:08 [Warning] Setting lower_case_table_names=2 because file system for /opt/local/var/db/mysql5/ is case insensitive 110108 15:33:08 [Note] Plugin 'FEDERATED' is disabled. 110108 15:33:08 [Note] Plugin 'ndbcluster' is disabled. /opt/local/libexec/mysqld: Table 'mysql.plugin' doesn't exist 110108 15:33:08 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110108 15:33:09 InnoDB: Started; log sequence number 4 1596664332 110108 15:33:09 [ERROR] /opt/local/libexec/mysqld: Can't create/write to file '/opt/local/var/db/mysql5/mac.local.pid' (Errcode: 13) 110108 15:33:09 [ERROR] Can't start server: can't create PID file: Permission denied 110108 15:33:09 mysqld_safe mysqld from pid file /opt/local/var/db/mysql5/gPod.local.pid ended I can't see why MySQL can't create the pid file, since manually creating it using the _mysql user succeeds (sudo -u _mysql touch mac.local.pid from inside ~/db/mysql5) Any ideas how to resolve this?

  Read the article

• How do I delete hardlinks, symbolic links, junction points, etc please?

  - by jonny

  I could be wrong, but I'm yet to hear a valid argument for the exploitability that these things deliver...outweighing their very dubious / debatable functionality. They seem to me to be marginally handy, but I don't think I have any need for them. I do have a need for security, however. How can I delete their entire functionality permanently from my hard drive, please? Microsoft only has pages on how to create them; which seems almost peculiar to the point of being dubious (at least, to me...) And just a dumb command line question, am I correct in assuming fsutil hardlink list c: will enumerate every single hardlink on that drive? C:\Windows\system32>fsutil hardlink list c: \Windows\System32 Also, how do I delete symbolic links please ;) But I'd just rather have all symbolic linking and recursion-creating stuff removed, if that's possible? C:\Windows\system32>fsutil behavior query symlinkevaluation Local to local symbolic links are enabled. Local to remote symbolic links are enabled. Remote to local symbolic links are disabled. Remote to remote symbolic links are disabled.

  Read the article

• Can I format a Veritas cluster shared volume from windows?

  - by spaghettidba

  We have a Microsoft Failover Cluster with dynamic disks managed by Veritas Storage Foundation. Today the sysadmins added a new disk for SQL Server but the cluster size on the volume was wrong, so I issued a quick format to change it. The disk volume failed, the SQL Server group failed as well and the cluster became unresponsive. After some minutes I managed to fail over to a passive node. The SAN admins say it's my fault because I shouldn't have formatted the disk from the Windows format applet, but I should have used Veritas Enterprise Administrator instead. Can a format operation bring offline a whole cluster group this way? Relevant error messages: From the eventlog: The cluster resource host subsystem (RHS) stopped unexpectedly. An attempt will be made to restart it. This is usually due to a problem in a resource DLL. Please determine which resource DLL is causing the issue and report the problem to the resource vendor. From the cluster.log ERR [RCM] rcm::RcmResControl::DoResourceControl: ERROR_RESOURCE_CALL_TIMED_OUT(5910)' because of 'Control(STORAGE_GET_DISK_INFO_EX) to resource 'NameOfTheDiskGroup' timed out.' Veritas Documentation: Excerpt from Symantec's documentation: Note: Before manually creating the resource, you must format the cluster-shared volume with NTFS using the VEA GUI and mount it on the node where you are trying to create the resource. Does this mean the disk cannot be formatted from Windows? I don't read it that way. For the record, I formatted many disks using the Windows applet in the past and nothing bad happened.

  Read the article

• Vlans and subinterfaces

  - by Adeodatus

  I've inherited a moderate size network that I'm trying to bring some sanity to. Basically, its 8 public class Cs and a slew of private ranges all on one vlan (vlan1, of course). Most of the network is located throughout dark sites. I need to start separating some of the network. I've changed the ports from the main cisco switch (3560) to the cisco router (3825) and the other remote switches to trunking with dot1q encapsulation. I'd like to start moving a few select subnets to different vlans. To get some of the different services provided on our address space (and to separate customers) on to different vlans, do I need to create a subinterface on the router for each vlan and, if so, how do I get the switch port to work on a specific vlan? Keep in mind, these are dark sites and geting console access is difficult if not impossible at the moment. I was planning on creating a subinterface on the router for each vlan then setting the ports with services I want to move to a different vlan to allow only that vlan. Example of vlan3: 3825: interface GigabitEthernet0/1.3 description Vlan-3 encapsulation dot1Q 3 ip address 192.168.0.81 255.255.255.240 the connection between the switch and router: interface GigabitEthernet0/48 description Core-router switchport trunk encapsulation dot1q switchport mode trunk show interfaces gi0/48 switchport Name: Gi0/48 Switchport: Enabled Administrative Mode: trunk Operational Mode: trunk Administrative Trunking Encapsulation: dot1q Operational Trunking Encapsulation: dot1q Negotiation of Trunking: On Access Mode VLAN: 1 (default) Trunking Native Mode VLAN: 1 (default) Administrative Native VLAN tagging: enabled Voice VLAN: none Administrative private-vlan host-association: none Administrative private-vlan mapping: none Administrative private-vlan trunk native VLAN: none Administrative private-vlan trunk Native VLAN tagging: enabled Administrative private-vlan trunk encapsulation: dot1q Administrative private-vlan trunk normal VLANs: none Administrative private-vlan trunk private VLANs: none Operational private-vlan: none Trunking VLANs Enabled: ALL Pruning VLANs Enabled: 2-1001 Capture Mode Disabled Capture VLANs Allowed: ALL Protected: false Unknown unicast blocked: disabled Unknown multicast blocked: disabled Appliance trust: none So, if the boxen hanging off of gi0/18 on the 3560 are on an unmanaged layer2 switch and all within the 192.168.0.82-95 range and are using 192.168.0.81 as their gateway, what is left to do, especially to gi0/18, to get this working on vlan3? Are there any recommendations for a better setup without taking everything offline?

  Read the article

• Different approaches to share files over local network

  - by exTyn

  I know, that I can use Google to find methods to share files over local network [1]. But, I have never shared files over local network, and I want to do this in a good, professional way. Also, this could be a good community wiki, I think. Well, what I am asking for, is: what are pros and cons of different methods to sharing files ofver local network? In my case, I need to share files between Linux & Win 7, and I want it to be secure (= without access for anyone else but me & people in my room). Another question (connected with above topic) is about playing music over the local network. Let's say, I live with 2 other guys in a room, one of us have speakers and we want to collaborate in creating playlists (e.g. everyone is choosing 3 songs to be played). Is it possible? How to do this? I am asking this question on SuperUser, because it (question) is connected with hardware & software (network, connecting computers, software for managing playlists in network etc.). I think it is most accurate place for such question (I have considered SO and SF). [1] And I have already done this! But, I do not have an experience in this field (sharing files over local network), do I am asking about pros and cons.

  Read the article

• Outlook certificate error and separate send/receive error

  - by Richard

  I run a laptop with Vista 32bit and MS Office 2010. Outlook has two profiles, both configured as POP3/SMTP and neither go through an exchange server. Recently, one of the mail servers (hosted with easily) was getting full, so I changed the profile setting to delete from the server if mails are older than 60 days. Suddenly, I am now experiencing a couple of glitches. The first is that I get a certificate error when outlook tries it's first send/receive under the relevant profile - "The server you are connected to is using a security certificate that cannot be verified" This continues despite apparently successfully re-importing the certificate. The second glitch is that I get a "Sending reported error (0x8004010F): 'Outlook data file cannot be accessed'" error on send receive. Strangely, it seems to be trying to send/receive twice - once to 'mail@domain', which works, and the second to 'domain' which doesn't. I've tried deleting the profile and re-creating it, pointing to the original .pst file, but still get both errors. Does anybody know how I can resolve these errors? (As a by note, and not that important, more for curiosity, does anybody know why simply changing the delete from server setting against that profile would cause these issues?)

  Read the article

• Error setting up Data Protection Manager 2010 Agents / Network "Unauthenticated" in network settings

  - by Bowsa

  I'm not sure if the two are connected but i suspect they are. Basically I'm tring to setup Data Protection Manager 2010 on a fresh install of Server 2008 R2 in a SBS 2003 domain. Everything went fine until trying to install agents across the network. Upon clicking add, i get the following error message: Unable to connect to the Active Directory Domain Services Database. Make sure that the DPM server is a member of a domain and that the controller is running. Also verify that there is network connectivity between the DPM server and the domain controller. ID: 7 As usual (worryingly) the MSDN support for 2010 products is nearly non existant, clicking the error ID simply gives a page not found error. So after 2 days of Googling and trying various fixes (DNS settings, adding permissions to AD objects, rejoining the domain and many more) I thought I'd ask here in the hope that someone out there may have had this issue before. Any help greatly appreciated! Some further info: Firewalls are disabled on the Server 2008, SBS, and client machines. Manually installing and adding the client in also fails, as the DPM server tries to contact the DC first. Edit: I tried creating a new protection group instead, and it gives a different error upon adding the machines: Following machines are not found in AD: COMPUTERNAME.COMPANYNAME.LOCAL Is there a certain directory structure it follows in AD?

  Read the article

• how many sites IIS 6 can handle

  - by Sarah Nasir

  Is there a limit for creating Sites in IIS. i have searched and some forums have it in discussion which says there is no limit. Someone mentioned that he has created upto 100,000 sites in IIS 6 but i dont know his server specs though. Personally i feel that whatever the limit of IIS, the resources will be run out well before the limit reaches. how do big sites like blogger and wordpress handle a huge number of sites on their server. Questions: 1) Is there an upper limit for IIS 6.0? if yes then what is it 2) What should be a good number of requests IIS should serve for a decent server? (I am not talking about dynamic requests on server or logs.) 3) Is there a way I can do the test run on my cloud to test the capability of my server. what factors should i keep in view. db request, page size, disk read/writes etc ? Response shall be highly appreciated.

  Read the article

• how many sites IIS 6 can handle

  - by Sarah Nasir

  Is there a limit for creating Sites in IIS. i have searched and some forums have it in discussion which says there is no limit. Someone mentioned that he has created upto 100,000 sites in IIS 6 but i dont know his server specs though. Personally i feel that whatever the limit of IIS, the resources will be run out well before the limit reaches. how do big sites like blogger and wordpress handle a huge number of sites on their server. Questions: 1) Is there an upper limit for IIS 6.0? if yes then what is it 2) What should be a good number of requests IIS should serve for a decent server? (I am not talking about dynamic requests on server or logs.) 3) Is there a way I can do the test run on my cloud to test the capability of my server. what factors should i keep in view. db request, page size, disk read/writes etc ? Response shall be highly appreciated.

  Read the article

• Unable to specify parameters to cvlc in a script

  - by VxJasonxV

  I'm creating a script that issues a few curl commands in order to access a time-protected mms stream link, then set up a relay using cvlc (vlc's command line interface) for my own use on an unencumbered player. The curl aspect of this is working, as I can run as a browser and curl side by side and get the same access url. (It's time locked meaning the stream will work forever, but you have to connect quickly or the URL will time out.) The very end of the script prints the command I will run, which is then followed up by "exec $CMD". When I echo $CMD I get: cvlc --sout '#standard{access=http,mux=asf,dst=0.0.0.0:58194}' mms://[...] Manually Copy/Pasting this command in, verbatim, works perfectly fine, but as part of a script, the cvlc execution output says: [0x9743d0] main interface error: no suitable interface module [0x962120] main libvlc error: interface "globalhotkeys,none" initialization failed [0x9743d0] dummy interface: using the dummy interface module... [0xb16e30] stream_out_standard stream out error: no mux specified or found by extension [0xb16ad0] main stream output error: stream chain failed for `standard{mux="",access="",dst="'#standard{access=http,mux=asf,dst=0.0.0.0:58194}'"}' [0xb11cd0] main input error: cannot start stream output instance, aborting [0xb11f70] signals interface error: Caught Interrupt signal, exiting... Why is --sout behaving one way in a script (non-interactive shell?) vs. another way in the foreground (interactive shell) ?

  Read the article

• winbind failing after a semi-random amount of time

  - by The Digital Ninja

  I have winbind set up to authenticate to our AD for samba shares. This is the third such server, and the only one having any issues. It seems after a random amount of time samba shares will just stop working. Winbind processes seem to be running but restarting them seems to fix the issue for a while. Looking at the logs have been kind of hit an miss and I don't know exactly when it fails. One interesting thing is that it seems to be pulling from another domain controller that it shoudlnt. I censored out the domain name in this example. But isnt there some way to block authentication to a domain? I'm not sure if this is a symptom or a cause of the issue. [2010/10/18 08:02:10, 0] winbindd/winbindd_cache.c:initialize_winbindd_cache(2577) initialize_winbindd_cache: clearing cache and re-creating with version number 1 [2010/10/18 09:15:54, 1] libsmb/clikrb5.c:ads_krb5_mk_req(686) ads_krb5_mk_req: krb5_get_credentials failed for [email protected] (Cannot find KDC for requested realm) [2010/10/18 09:15:54, 1] libsmb/cliconnect.c:cli_session_setup_kerberos(624) cli_session_setup_kerberos: spnego_gen_negTokenTarg failed: Cannot find KDC for requested realm [2010/10/18 09:15:54, 0] lib/util_sock.c:write_data(1139) write_data: write failure. Error = Connection reset by peer [2010/10/18 09:15:54, 0] libsmb/clientgen.c:write_socket(242) write_socket: Error writing 108 bytes to socket 18: ERRNO = Connection reset by peer [2010/10/18 09:15:54, 0] libsmb/clientgen.c:cli_send_smb(290) Error writing 108 bytes to client. -1 (Connection reset by peer)

  Read the article

• Testing for disk write

  - by Montecristo

  I'm writing an application for storing lots of images (size <5MB) on an ext3 filesystem, this is what I have for now. After some searching here on serverfault I have decided for a structure of directories like this: 000/000/000000001.jpg ... 236/519/236519107.jpg This structure will allow me to save up to 1'000'000'000 images as I'll store a max of 1'000 images in each leaf. I've created it, from a theoretical point of view seems ok to me (though I've no experience on this), but I want to find out what will happen when there will be directories full of files in there. A question about creating this structure: is it better to create it all in one go (takes approx 50 minutes on my pc) or should I create directories as they are needed? From a developer point of view I think the first option is better (no extra waiting time for the user), but from a sysadmin point of view, is this ok? I've thought I could do as if the filesystem is already under the running application, I'll make a script that will save images as fast as it can, monitoring things as follows: how much time does it take for an image to be saved when there is no or little space used? how does this change when the space starts to be used up? how much time does it take for an image to be read from a random leaf? Does this change a lot when there are lots of files? Does launching this command sync; echo 3 | sudo tee /proc/sys/vm/drop_caches has any sense at all? Is this the only thing I have to do to have a clean start if I want to start over again with my tests? Do you have any suggestions or corrections?

  Read the article

• A-2-Z web hosting on Amazon AWS

  - by JDelage

  All, I am studying web dvp, and one of my classes is project-based. We have to build a functional site that demonstrate our understanding of: HTML, CSS, Javascript, php, MySQL, And potentially Ajax or some other web component. For the project, we can use a local server using WampServer and basically build the site entirely on our laptop. If I have time, I would like to create a real site, and I thought it would be a good way to familiarize myself with Amazon's AWS services. So if I purchase a domain name, can I rely on AWS to host the site from A-to-Z? I understand I can use AWS to host content, the database, and do the background computations, if needed. What else do I need and what are the parts that AWS cannot help me with? Second, is there good documentation for a beginner to navigate AWS and learn how to use it (either on Amazon, or some 3rd party sites, or even a good book, as long as is up to date). The ideal documentation would be a tutorial on creating a web site from a-to-z on AWS, as detailed as possible. As you can guess, I have limited understanding of the IT issues. I have 0 Linux or sysadmin experience, but this is a good opportunity to change that. I hope you can help me. Thank you, JDelage PS: Please keep the answers AWS-specific. At this point, I am only interested in alternative services to the extent that they plug a hole in Amazon's offering.

  Read the article

• Hyper-v on 2012R2 startup gen1 vm causes the host to freeze up

  - by sputnik

  I've searched a lot to resolve the following issue, but nothing helped me. My problem is, that starting up a first-gen vm locks up the whole host. Only a hard reset helps. Second-gen vm starts and runs perfectly. The freezes happened on 3 different vms. FreeBSD, Ubuntu, Windows Server 2008R2, while Windows 8.1 on second gen config works perfectly. Im using this pc mainly as a workstation. No eventlog errors nor dumps are generated. My system: Windows Server 2012R2 FX-8350, non OC ASRock 870 Extreme R2 (Crappy board imho) 32GB DDR3 1866@1600 (My motherboard, against the "support" for 1866ram won't work with full speed) 120GB SSD 4.5TB Storage space device I dont think that its due to my system, because vmware workstation was running without problems. Did I forget to configure something? Any help is appreciated. P.S: Even deactivating C1E, C6, C&Q didnt work. P.P.S: With no virtual network adapter set, the system still locks up. Creating a first gen vm without any hdds and network and launching works. Attaching a boot dvd causes the host to freeze. The host freezes as the gen1 vm begins to boot, doesn't matter if from dvd or hdd

  Read the article

• How to burn a data DVD in Windows XP

  - by SabreWolfy

  I am trying to burn a data DVD (DVD+R) in Windows XP SP3 on a Dell desktop computer. The computer has a licensed copy of Nero 6.3. Nero indicates that an update to version 6.6 is available, but after following the link provided, it redirects me to the Nero website to purchase the upgrade. I'm not interested in doing this. After creating a project in Nero 6.3, inserting a blank DVD+R and trying to start burning the data DVD, Nero indicates that I should insert an appropriate disk into the drive. It does not seem to detect the blank DVD+R. I downloaded infrarecorder and cdrtfe from Sourceforge. Neither of these programs worked either. They both indicated that I should insert the correct media, with cdrtfe saying there is no disk in the drive. I tried with another blank DVD +R with the same effect. I inserted a CDR containing data into the drive and the Windows read read this CDR without a problem. I have no reason to believe that the drive is faulty. I am aware that Windows XP itself is not able to burn DVDs. However, it seems that three third-party software programs are not able to burn a data DVD in Window XP. The specifications provided in Nero indicate that DVD+R is compatible with the drive. How can I burn a backup data DVD in Windows XP?

  Read the article

< Previous Page | 451 452 453 454 455 456 457 458 459 460 461 462  | Next Page >