Search Results

Search found 19281 results on 772 pages for 'blender game engine'.

Page 457/772 | < Previous Page | 453 454 455 456 457 458 459 460 461 462 463 464  | Next Page >

• Dirt compression from vehicle tires

  - by Mungoid

  So I kinda have this working but its not correct because it just averages, so I wanted to know if anyone here has any ideas. I'm trying to simulate loose dirt compression under the tires of a vehicle to reduce the potential bumpiness of 'chunky' terrain. Currently how I do this is that I have a bounding box shape around my tires, set a little lower so they intersect with the terrain. Each frame, I (currently) average all of the heights of each point in the terrain that are within the box bounds of that tire, and then set them all to that average. Clearly this won't work in most cases because, for example, if i'm on a hill, the terrain will deform way too much. One way I thought was to have a max and min amount the points could raise and lower but that still doesn't seem to work properly and sometimes looks more like steps than smooth dirt. I wanna say that there is probably a bit more to this that what i'm currently doing but I am not sure where to look. Could anyone here shed some light on this subject? Would I benefit any by maybe looking up some smoothing algorith or something similar?

  Read the article

• Sprite rotation

  - by Kipras

  I'm using OpenGL and people suggest using glRotate for sprite rotation, but I find that strange. My problem with it is that it rotates the whole matrix, which sort of screws up all my collision detection and so on and so forth. Imagine I had a sprite at position (100, 100) and in position (100, 200) is an obstacle and the sprite's facing it. I rotate the sprite away from the obstacle and when move upwards my y axis, even though the projection shows like it's going away from the obstacle, the sprite will intersect it. So I don't see another way of a rotating a sprite and not screwing up all collision detection other than doing mathematical operations on the image itself. Am I right or am I missing something?

  Read the article

• Getting Started with Component Architecture: DI?

  - by ashes999

  I just moved away from MVC towards something more component-architecture-like. I have no concept of messages yet (it's rough prototype code), objects just get internal properties and values of other classes for now. That issue aside, it seems like this is turning into an aspect-oriented-programming challenge. I've noticed that all entities with, for example, a position component will have similar properties (get/set X/Y/Z, rotation, velocity). Is it a common practice, and/or good idea, to push these behind an interface and use dependency injection to inject a generic class (eg. PositionComponent) which already has all the boiler-plate code? (I'm sure the answer will affect the model I use for message/passing)

  Read the article

• How to swap row/column major order?

  - by 0X1A

  I'm trying to get a sprite sheet clipped in the right order but I'm a bit stumped, every iteration I've tried has tended to be in the wrong order. This is my current implementation. Frames = (TempSurface->h / ClipHeight) * (TempSurface->w / ClipWidth); SDL_Rect Clips[Frames]; for (i = 0; i < Frames; i++) { if (i != 0 && i % (TempSurface->h / ClipHeight) == 0) ColumnIndex++; Clips[i].x = ColumnIndex * ClipWidth; Clips[i].y = i % (TempSurface->h / ClipHeight) * ClipHeight; Clips[i].w = ClipWidth; Clips[i].h = ClipHeight; } Where TempSurface is the entire sheet loaded to a SDL_Surface and Clips[] is an array of SDL_Rects. What results from this is a sprite sheet set to SDL_Rects in the wrong order. For example I need a sheet of dimensions 4x4 to look like this: | 0 | 1 | 2 | 3 | | 4 | 5 | 6 | 7 | | 8 | 9 | 10| 11| | 12| 13| 14| 15| But instead I get this order: | 0 | 4 | 8 | 12| | 1 | 5 | 9 | 13| | 2 | 6 | 10| 14| | 3 | 7 | 11| 15| Columns and rows order does not match. What should I do to fix the order?

  Read the article

• How do I implement a "sliding out of / into" effect on a settings menu similar to that in Angry Birds?

  - by VictorB

  I'm trying to implement a settings menu component similar to that in Angry Birds - a button control that makes an options menu slide out of it and back into it when clicked on. I use scene2d.ui to build the UI components: a Button in a Table to implement the button control, a Table to implement the options menu, and a Stack to lay these out one on top of the other and at this moment I have the following behavior: When the user hits the button control for the first time, then the alpha of the table component is set to 1; When the user hits the button control the second time, then the alpha of the table component is set to 0; And so on. Any ideas how I can get the sliding out of and into effect on user clicks with libgdx? Similar to what Angry Birds provides. Maybe using the TweenEngine, actions, interpolations, combinations of these? Thanks in advance.

  Read the article

• How to configure background image to be at the bottom OpenGL Android

  - by Maxim Shoustin

  I have class that draws white line: public class Line { //private FloatBuffer vertexBuffer; private FloatBuffer frameVertices; ByteBuffer diagIndices; float[] vertices = { -0.5f, -0.5f, 0.0f, -0.5f, 0.5f, 0.0f }; public Line(GL10 gl) { // a float has 4 bytes so we allocate for each coordinate 4 bytes ByteBuffer vertexByteBuffer = ByteBuffer.allocateDirect(vertices.length * 4); vertexByteBuffer.order(ByteOrder.nativeOrder()); // allocates the memory from the byte buffer frameVertices = vertexByteBuffer.asFloatBuffer(); // fill the vertexBuffer with the vertices frameVertices.put(vertices); // set the cursor position to the beginning of the buffer frameVertices.position(0); } /** The draw method for the triangle with the GL context */ public void draw(GL10 gl) { gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glVertexPointer(2, GL10.GL_FLOAT, 0, frameVertices); gl.glColor4f(1.0f, 1.0f, 1.0f, 1f); gl.glDrawArrays(GL10.GL_LINE_LOOP , 0, vertices.length / 3); gl.glLineWidth(5.0f); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); } } It works fine. The problem is: When I add BG image, I don't see the line glView = new GLSurfaceView(this); // Allocate a GLSurfaceView glView.setEGLConfigChooser(8, 8, 8, 8, 16, 0); glView.setRenderer(new mainRenderer(this)); // Use a custom renderer glView.setBackgroundResource(R.drawable.bg_day); // <- BG glView.setRenderMode(GLSurfaceView.RENDERMODE_WHEN_DIRTY); glView.getHolder().setFormat(PixelFormat.TRANSLUCENT); How to get rid of that?

  Read the article

• Increase moving speed of body

  - by Siddharth

  How to move ball speedily on the screen using box2d in libGDX? public class Box2DDemo implements ApplicationListener { private SpriteBatch batch; private TextureRegion texture; private World world; private Body groundDownBody, groundUpBody, groundLeftBody, groundRightBody, ballBody; private BodyDef groundBodyDef1, groundBodyDef2, groundBodyDef3, groundBodyDef4, ballBodyDef; private PolygonShape groundDownPoly, groundUpPoly, groundLeftPoly, groundRightPoly; private CircleShape ballPoly; private Sprite sprite; private FixtureDef fixtureDef; private Vector2 ballPosition; private Box2DDebugRenderer renderer; Vector2 vector2; @Override public void create() { texture = new TextureRegion(new Texture( Gdx.files.internal("img/red_ring.png"))); sprite = new Sprite(texture); sprite.setOrigin(sprite.getWidth() / 2, sprite.getHeight() / 2); batch = new SpriteBatch(); world = new World(new Vector2(0.0f, -10.0f), false); groundBodyDef1 = new BodyDef(); groundBodyDef1.type = BodyType.StaticBody; groundBodyDef1.position.x = 0.0f; groundBodyDef1.position.y = 0.0f; groundDownBody = world.createBody(groundBodyDef1); groundBodyDef2 = new BodyDef(); groundBodyDef2.type = BodyType.StaticBody; groundBodyDef2.position.x = 0f; groundBodyDef2.position.y = Gdx.graphics.getHeight(); groundUpBody = world.createBody(groundBodyDef2); groundBodyDef3 = new BodyDef(); groundBodyDef3.type = BodyType.StaticBody; groundBodyDef3.position.x = 0f; groundBodyDef3.position.y = 0f; groundLeftBody = world.createBody(groundBodyDef3); groundBodyDef4 = new BodyDef(); groundBodyDef4.type = BodyType.StaticBody; groundBodyDef4.position.x = Gdx.graphics.getWidth(); groundBodyDef4.position.y = 0f; groundRightBody = world.createBody(groundBodyDef4); groundDownPoly = new PolygonShape(); groundDownPoly.setAsBox(480.0f, 10f); fixtureDef = new FixtureDef(); fixtureDef.density = 0f; fixtureDef.restitution = 1f; fixtureDef.friction = 0f; fixtureDef.shape = groundDownPoly; fixtureDef.filter.groupIndex = 0; groundDownBody.createFixture(fixtureDef); groundUpPoly = new PolygonShape(); groundUpPoly.setAsBox(480.0f, 10f); fixtureDef = new FixtureDef(); fixtureDef.friction = 0f; fixtureDef.restitution = 0f; fixtureDef.density = 0f; fixtureDef.shape = groundUpPoly; fixtureDef.filter.groupIndex = 0; groundUpBody.createFixture(fixtureDef); groundLeftPoly = new PolygonShape(); groundLeftPoly.setAsBox(10f, 320f); fixtureDef = new FixtureDef(); fixtureDef.friction = 0f; fixtureDef.restitution = 0f; fixtureDef.density = 0f; fixtureDef.shape = groundLeftPoly; fixtureDef.filter.groupIndex = 0; groundLeftBody.createFixture(fixtureDef); groundRightPoly = new PolygonShape(); groundRightPoly.setAsBox(10f, 320f); fixtureDef = new FixtureDef(); fixtureDef.friction = 0f; fixtureDef.restitution = 0f; fixtureDef.density = 0f; fixtureDef.shape = groundRightPoly; fixtureDef.filter.groupIndex = 0; groundRightBody.createFixture(fixtureDef); ballPoly = new CircleShape(); ballPoly.setRadius(16f); fixtureDef = new FixtureDef(); fixtureDef.shape = ballPoly; fixtureDef.density = 1f; fixtureDef.friction = 1f; fixtureDef.restitution = 1f; ballBodyDef = new BodyDef(); ballBodyDef.type = BodyType.DynamicBody; ballBodyDef.position.x = (int) 200; ballBodyDef.position.y = (int) 200; ballBody = world.createBody(ballBodyDef); // ballBody.setLinearVelocity(200f, 200f); // ballBody.applyLinearImpulse(new Vector2(250f, 250f), // ballBody.getLocalCenter()); ballBody.createFixture(fixtureDef); renderer = new Box2DDebugRenderer(true, false, false); } @Override public void dispose() { ballPoly.dispose(); groundLeftPoly.dispose(); groundUpPoly.dispose(); groundDownPoly.dispose(); groundRightPoly.dispose(); world.destroyBody(ballBody); world.dispose(); } @Override public void pause() { } @Override public void render() { world.step(1f/30f, 3, 3); Gdx.gl.glClearColor(1f, 1f, 1f, 1f); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); batch.begin(); vector2 = ballBody.getLinearVelocity(); System.out.println("X=" + vector2.x + " Y=" + vector2.y); ballPosition = ballBody.getPosition(); renderer.render(world,batch.getProjectionMatrix()); // int preX = (int) (vector2.x / Math.abs(vector2.x)); // int preY = (int) (vector2.y / Math.abs(vector2.y)); // // if (Math.abs(vector2.x) == 0.0f) // ballBody1.setLinearVelocity(1.4142137f, vector2.y); // else if (Math.abs(vector2.x) < 1.4142137f) // ballBody1.setLinearVelocity(preX * 5, vector2.y); // // if (Math.abs(vector2.y) == 0.0f) // ballBody1.setLinearVelocity(vector2.x, 1.4142137f); // else if (Math.abs(vector2.y) < 1.4142137f) // ballBody1.setLinearVelocity(vector2.x, preY * 5); batch.draw(sprite, (ballPosition.x - (texture.getRegionWidth() / 2)), (ballPosition.y - (texture.getRegionHeight() / 2))); batch.end(); } @Override public void resize(int arg0, int arg1) { } @Override public void resume() { } } I implement above code but I can not achieve higher moving speed of the ball

  Read the article

• After one has made many grid based puzzles how does one make then into a PDF ready for printing

  - by alan ross

  After one has generated many grid based puzzles like sudoku, kakuro or even plain crosswords and now one has to print them in a book. How does one make a pdf (book file) from them automatically. To explain the question better. One has the puzzle ready in computer format like ..35.6.89 for all nine rows. The dot being the empty cell. How does one convert then to a picture on a PDF page complete with box, automatically without doing them individually and then print a book from the pdf file. As can be seen there are other things also printed on the page all this is done automatically.

  Read the article

• How are dependant quests generated in Guild Wars 2?

  - by Aufziehvogel

  I recently read that Guild Wars 2 uses a system where the creation of quests depends on which actions user took when they were presented another quest. An example was: There might be a quest to protect a person. If users do not take this action, the person might be kidnapped and later there is a quest to rescue this person. Is there any information on whether the creation of these quests is somehow automatic? From the article it sounded like automatically, but from the specific example you could also guess that people just created a task-set where they added conditions (Task 1 taken: OK; Task 1 not taken: Show Task 2). From what I heard about AI they might also have implemented some sort of a huge neural network to make decisions?

  Read the article

• matrix to transform unit cube to space defined by 8 arbitrary points

  - by aadster

  I asked a question relating to similar to this already, but I think this is a clearer objective of what Im trying to achieve.. or whether its possible at all! Im trying to find a transformation (matrix ideally) which would transform the 8 points of a 3d unit cube to 8 arbitrary points in space. The 8 target points have no known structure. e.g: My gut feeling is that a matrix is unable to provide this xform since the cube faces vertices can be concave.. but are there any other methods of transformation? Thanks!

  Read the article

• Why Android for new (micro) consoles?

  - by Klaim

  There are a lot of new (micro) consoles with Android inside coming soon or already there (OUYA for example). My question is: why use Android and not another OS as base for these consoles? I assume that there are pragmatic answers to this but I can't see any clear killer feature. For example, one can assume that any stable Linux distribution would work (like Valve seem to think). Android is primarily targetted at mobile platforms which mean it is built around the idea of being interrupted which goes against a lot of what console devs needs in new hardware - but is not killing Android as a platform for gamedev either as it's just a constraint. Why not another OS? What's the Android killer features that make micro-console builder using it instead of Linux or anything else?

  Read the article

• Rotate an image and get back to its original position - opengles glkit

  - by Manoj

  I need to rotate an image in opengles GLkit and get it back to its original position in GLkit. rotation += 5; _modelViewMatrix = GLKMatrix4Rotate( _modelViewMatrix, GLKMathDegreesToRadians(5), 1, 0, 0); _modelViewMatrix = GLKMatrix4Rotate( _modelViewMatrix, GLKMathDegreesToRadians(rotation), 1,0,0); I need to move it in x axis for certain amount and getting back to its original position from where it started. How should i do it?

  Read the article

• Specifying force and angle in ApplyImpulse in box2d

  - by Deepak Mahalingam

  I need to apply an impulse on a object with a particular force and at a particular angle in Box2d. If I am right the syntax would be the following: body.GetBody().ApplyImpulse(new b2Vec2(direction, power),body.GetBody().GetWorldCenter()); The problem is my direction is in angles. I found a discussion where it was said that the way we can convert an angle into a vector would be as: new b2Vec2(Math.cos(angle*Math.PI/180),Math.sin(angle*Math.PI/180)); Now I am not sure how to combine these two. In other words, if I wish to apply a force of 30 units at an angle of 30 degrees at the center of the object, how should I do it?

  Read the article

• 2-components color model

  - by Cyan

  RGB is the natural color model for OpenGL. But a lot of other color models exist. For example, CMY(K) for printers, YUV for JPEG, the little cousins YCbCr and YCoCg, HSL & HSV from the 70's, and so on. All these models tend to share a common property : they are based on 3 components. Therefore my question is : Does it exist a 2-components color model ? I'm surprised to not find any. I was expecting something along the line of Hue+light could exist. I guess it cannot be as "complete" as a true 3-components color model, but a fine-enough approximation will be good for my usecase. The end objective is to store the 2 components into a single BC5 texture (GL_COMPRESSED_RED_GREEN_RGTC2 in OpenGL). The 3rd component requires a second fetch into a second texture, which hurts performance.

  Read the article

• how to use double buffering in awt? [on hold]

  - by Ishanth

  import java.awt.event.*; import java.awt.*; class circle1 extends Frame implements KeyListener { public int a=300; public int b=70; public int pacx=360; public int pacy=270; public circle1() { setTitle("circle"); addKeyListener(this); repaint(); } public void paint(Graphics g) { g.fillArc (a, b, 60, 60,pacx,pacy); } public void keyPressed(KeyEvent e) { int key=e.getKeyCode(); System.out.println(key); if(key==38) { b=b-5; //move pacman up pacx=135;pacy=270; //packman mouth upside if(b==75&&a>=20||b==75&&a<=945) { b=b+5; } else { repaint(); } } else if(key==40) { b=b+5; //move pacman downside pacx=315; pacy=270; //packman mouth down if(b==645&&a>=20||b==645&&a<=940) { b=b-5; } else{ repaint(); } } else if(key==37) { a=a-5; //move pacman leftside pacx=227; pacy=270; //packman mouth left if(a==15&&b>=75||a==15&&b<=640) { a=a+5; } else { repaint(); } } else if(key==39) { a=a+5; //move pacman rightside pacx=42;pacy=270; //packman mouth right if(a==945&&a>=80||a==945&&b<=640) { a=a-5; } else { repaint(); } } } public void keyReleased(KeyEvent e){} public void keyTyped(KeyEvent e){} public static void main(String args[]) { circle1 c=new circle1(); c.setVisible(true); c.setSize(400,400); } }

  Read the article

• How can I determine the first visible tile in an isometric perspective?

  - by alekop

  I am trying to render the visible portion of a diamond-shaped isometric map. The "world" coordinate system is a 2D Cartesian system, with the coordinates increasing diagonally (in terms of the view coordinate system) along the axes. The "view" coordinates are simply mouse offsets relative to the upper left corner of the view. My rendering algorithm works by drawing diagonal spans, starting from the upper right corner of the view and moving diagonally to the right and down, advancing to the next row when it reaches the right view edge. When the rendering loop reaches the lower left corner, it stops. There are functions to convert a point from view coordinates to world coordinates and then to map coordinates. Everything works when rendering from tile 0,0, but as the view scrolls around the rendering needs to start from a different tile. I can't figure out how to determine which tile is closest to the upper right corner. At the moment I am simply converting the coordinates of the upper right corner to map coordinates. This works as long as the view origin (upper right corner) is inside the world, but when approaching the edges of the map the starting tile coordinate obviously become invalid. I guess this boils down to asking "how can I find the intersection between the world X axis and the view X axis?"

  Read the article

• 3d js map rendering

  - by gotha

  In the past I've done a 2D tile map using HTML, CSS and Javascript. Now I have the task of creating a 3D version using the same technologies - think of it like a space map where all planets have x/y/z positions. Currently, I have no idea to do this. Is there an existing library or something I can modify to do my job? If not, what method of rendering the map should I use? It needs to be as browser independent as possible, so I can't use webgl, flash or canvas. I'm considering plain JS & HTML or SVG (using Raphael for compatibility).

  Read the article

• Getting Center and Radius of Irregural Object

  - by Moaz ELdeen

  I have drawn an asteroid object manually , and would like to get its center/radius by a specific equation. I think I can get them by calculated and hard-coded values. The code to draw the asteroid: void Asteroid::Draw() { float ratio = app::getWindowWidth()/app::getWindowHeight(); gl::pushMatrices(); gl::translate(m_Pos*ratio); gl::scale(3.5*ratio,3.5*ratio,3.5*ratio); gl::color(ci::Color(1,1,1)); gl::drawLine(Vec2f(-15,0),Vec2f(-10,-5)); gl::drawLine(Vec2f(-10,-5),Vec2f(-5,-5)); gl::drawLine(Vec2f(-5,-5),Vec2f(-5,-8)); gl::drawLine(Vec2f(-5,-8),Vec2f(5,-8)); gl::drawLine(Vec2f(5,-8),Vec2f(5,-5)); gl::drawLine(Vec2f(5,-5),Vec2f(10,-5)); gl::drawLine(Vec2f(10,-5),Vec2f(15,0)); gl::drawLine(Vec2f(15,0),Vec2f(10,5)); gl::drawLine(Vec2f(10,5),Vec2f(-10,5)); gl::drawLine(Vec2f(-10,5),Vec2f(-10,5)); gl::drawLine(Vec2f(-15,0),Vec2f(-10,5)); gl::popMatrices(); } According to the answer I have written that code to calculate the radius, is it correct or not ? cinder::Vec2f Asteroid::getCenter() { return ci::Vec2f(m_Pos.x, m_Pos.y); } double Asteroid::getRadius() { ci::Vec2f _vec = (getCenter()- Vec2f(15,5)); return _vec.length()*0.3f; }

  Read the article

• Cube rotation DX10

  - by German

  Well I'm reading the Frank's Luna DirectX10 book and, while I'm trying to understand the first demo, I found something that's not very clear at least for me. In the updateScene method, when I press A, S, W or D, the angles mTheta and mPhi change, but after that, there are three lines of code that I don't understand exactly what they do: // Convert Spherical to Cartesian coordinates: mPhi measured from +y // and mTheta measured counterclockwise from -z. float x = 5.0f*sinf(mPhi)*sinf(mTheta); float z = -5.0f*sinf(mPhi)*cosf(mTheta); float y = 5.0f*cosf(mPhi); I mean, this explains that they do, it says that it converts the spherical coordinates to cartesian coordinates, but, mathematically, why? why the x value is calculated by the product of the sins of both angles? And the z by the product of the sine and cosine? and why the y just uses the cosine? After that, those values (x, y and z) are used to build the view matrix. The book doesn't explain (mathematically) why those values are calculated like that (and I didn't find anything to help me to understand it at the first Part of the book: "Mathematical prerequisites"), so it would be good if someone could explain me what exactly happen in those code lines or just give me a link that helps me to understand the math part. Thanks in advance!

  Read the article

• Basic modelling of radar

  - by Hawk66

  I'm currently researching how to model/simulate radar for my naval simulation. Since the emphasis is on modelling ASW or submarines in general, I need only a basic radar model - at least for the beginning. So, does anybody know a resource for such a simple model? The model should take signal strength of the sensor, the size of the target and the terrain (height/ground clutter) into account. Thanks.

  Read the article

• Having trouble's understanding NIF model file format?

  - by NoobScratcher

  I'm attempting too develop a 3rd party application to make it easy to import 3d model part's into my mod for skyrim the plan was to have a fileviewer and preview window of the nif model but since , I don't know what the NIF file format actually is or where to get the vertex data from it or the hole nine yards of parsing a text file in detail I'm at a lost what to do. I'm very good at C++ but not at this super over complicated file formats , id much prefer .obj over the nif file format specification here -- http://niftools.sourceforge.net/doc/nif/index.html If someone could help me in understanding the file format in a natural and simple way and the exact parsing needed to create the 3D Model in the frustum and a explanation on how you figured that out would be happy to know. I use cygwin , notepad++ , win32 7

  Read the article

• Why are my sprite sheet's frames not visible in Cocos Builder?

  - by Ramy Al Zuhouri

  I have created a sprite sheet with zwoptex. Then I just dragged the .plist and .png files to my Cocos Builder project. After this I wanted to take a sprite frame and set it to a sprite: But the sprite image is empty! At first I thought it was just empty in Cocos Builder, and that it must have been working correctly when imported to a project. But if I try to run that scene with CCBReader I still see an empty sprite. Why?

  Read the article

• Drawing a line using openGL does not work

  - by vikasm

  I am a beginner in OpenGL and tried to write my first program to draw some points and a line. I can see that the window opens with white background but no line is drawn. I was expecting to see red colored (because glColor3f(1.0, 0.0, 0.0);) dots (pixels) and line. But nothing is seen. Here is my code. void init2D(float r, float g, float b) { glClearColor(r,g,b,0.0); glMatrixMode(GL_PROJECTION); gluOrtho2D(0.0, 200.0, 0.0, 150.0); } void display() { glClear(GL_COLOR_BUFFER_BIT); glColor3f(1.0, 0.0, 0.0); glBegin(GL_POINTS); for(int i = 0; i < 10; i++) { glVertex2i(10+5*i, 110); } glEnd(); //draw a line glBegin(GL_LINES); glVertex2i(10,10); glVertex2i(100,100); glEnd(); glFlush(); } int main(int argc, char** argv) { //Initialize Glut glutInit(&argc, argv); //setup some memory buffers for our display glutInitDisplayMode(GLUT_DOUBLE | GLUT_RGB); //set the window size glutInitWindowSize(500, 500); //create the window with the title 'points and lines' glutCreateWindow("Points and Lines"); init2D(0.0, 0.0, 0.0); glutDisplayFunc(display); glutMainLoop(); } I wanted to verify that the glcontext was opening properly and used this code: int main(int argc, char **argv) { glutInit(&argc, argv); //setup some memory buffers for our display glutInitDisplayMode(GLUT_DOUBLE | GLUT_RGB); //set the window size glutInitWindowSize(500, 500); //create the window with the title 'points and lines' glutCreateWindow("Points and Lines"); char *GL_version=(char *)glGetString(GL_VERSION); puts(GL_version); char *GL_vendor=(char *)glGetString(GL_VENDOR); puts(GL_vendor); char *GL_renderer=(char *)glGetString(GL_RENDERER); puts(GL_renderer); getchar(); return 0; } And the ouput I got was: 3.1.0 - Build 8.15.10.2345 Intel Intel(R) HD Graphics Family Can someone point out what I am doing wrong ? Thanks.

  Read the article

• ArrayList of Entites Random Movement

  - by opiop65

  I have an arraylist of entites that I want to move randomly. No matter what I do, they won't move. Here is my female class: import java.awt.Graphics2D; import java.awt.Image; import java.awt.Rectangle; import java.util.Random; import javax.swing.ImageIcon; public class Female extends Entity { static int femaleX = 0; static int femaleY = 0; double walkSpeed = .1f; Random rand = new Random(); int random; int dir; Player player; public Female(int posX, int posY) { super(posX, posY); } public void update() { posX += femaleX; posY += femaleY; } public void draw(Graphics2D g2d) { g2d.drawImage(getFemaleImg(), posX, posY, null); if (Player.showBounds == true) { g2d.draw(getBounds()); } } public Image getFemaleImg() { ImageIcon ic = new ImageIcon("res/female.png"); return ic.getImage(); } public Rectangle getBounds() { return new Rectangle(posX, posY, getFemaleImg().getHeight(null), getFemaleImg().getWidth(null)); } public void moveFemale() { random = rand.nextInt(3); System.out.println(random); if (random == 0) { dir = 0; posX -= (int) walkSpeed; } } } And here is how I update the female class in the main class: public void actionPerformed(ActionEvent ae) { player.update(); for(int i = 0; i < females.size(); i++){ Female tempFemale = females.get(i); tempFemale.update(); } repaint(); } If I do something like this(in the female update method): public void update() { posX += femaleX; posY += femaleY; posX -= walkSpeed; } The characters move with no problem. Why is this?

  Read the article

• How to texture voxel terrain without triplanar texturing?

  - by Thelvyn

  How can a voxel terrain (marching cubes) be textured without triplanar mapping ? The goal being to have more artistic freedom. I think, I could unwrap the mesh while extracting the isosurface then use projective painting. But I do not know how to handle terrain modifications without breaking the texture. I also guess that virtual texturing could help here. Links for these matters would be appreciated.

  Read the article

< Previous Page | 453 454 455 456 457 458 459 460 461 462 463 464  | Next Page >