Search Results

Search found 54503 results on 2181 pages for 'mvc net'.

Page 459/2181 | < Previous Page | 455 456 457 458 459 460 461 462 463 464 465 466  | Next Page >

  • ADO.NET Data Services Entity Framework request error when property setter is internal

    - by Jim Straatman
    I receive an error message when exposing an ADO.NET Data Service using an Entity Framework data model that contains an entity (called "Case") with an internal setter on a property. If I modify the setter to be public (using the entity designer), the data services works fine. I don’t need the entity "Case" exposed in the data service, so I tried to limit which entities are exposed using SetEntitySetAccessRule. This didn’t work, and service end point fails with the same error. public static void InitializeService(IDataServiceConfiguration config) { config.SetEntitySetAccessRule("User", EntitySetRights.AllRead); } The error message is reported in a browser when the .svc endpoint is called. It is very generic, and reads “Request Error. The server encountered an error processing the request. See server logs for more details.” Unfortunately, there are no entries in the System and Application event logs. I found this stackoverflow question that shows how to configure tracing on the service. After doing so, the following NullReferenceExceptoin error was reported in the trace log. Does anyone know how to avoid this exception when including an entity with an internal setter? Blockquote 131076 3 0 2 MOTOJIM http://msdn.microsoft.com/en-US/library/System.ServiceModel.Diagnostics.TraceHandledException.aspx Handling an exception. 685a2910-19-128703978432492675 System.NullReferenceException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 Object reference not set to an instance of an object. at System.Data.Services.Providers.ObjectContextServiceProvider.PopulateMemberMetadata(ResourceType resourceType, MetadataWorkspace workspace, IDictionary2 entitySets, IDictionary2 knownTypes) at System.Data.Services.Providers.ObjectContextServiceProvider.PopulateMetadata(IDictionary2 knownTypes, IDictionary2 entitySets) at System.Data.Services.Providers.BaseServiceProvider.PopulateMetadata() at System.Data.Services.DataService1.CreateProvider(Type dataServiceType, Object dataSourceInstance, DataServiceConfiguration&amp; configuration) at System.Data.Services.DataService1.EnsureProviderAndConfigForRequest() at System.Data.Services.DataService1.ProcessRequestForMessage(Stream messageBody) at SyncInvokeProcessRequestForMessage(Object , Object[] , Object[] ) at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]&amp; outputs) at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc&amp; rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc&amp; rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc&amp; rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage3(MessageRpc&amp; rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage2(MessageRpc&amp; rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage1(MessageRpc&amp; rpc) at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet) </StackTrace> <ExceptionString>System.NullReferenceException: Object reference not set to an instance of an object. at System.Data.Services.Providers.ObjectContextServiceProvider.PopulateMemberMetadata(ResourceType resourceType, MetadataWorkspace workspace, IDictionary2 entitySets, IDictionary2 knownTypes) at System.Data.Services.Providers.ObjectContextServiceProvider.PopulateMetadata(IDictionary2 knownTypes, IDictionary2 entitySets) at System.Data.Services.Providers.BaseServiceProvider.P

    Read the article

  • PopulateOnDemand does not work on data bound ASP.Net TreeView

    - by Shay Friedman
    Hi, I have a TreeView that is bound to a XmlDataSource control. I've added some TreeNodeBinding elements to define how I want the XML data to be shown. I have also added PopulateOnDemand=true to these TreeNodeBindings. However, doing so didn't change a thing and the entire XML tree is displayed. Moreover, the TreeNodePopulate event is not fired on node expand as well. Important information: I'm using ASP.NET 4. This is an example that reproduces the problem (very straight forward): <%@ Page Language="C#" AutoEventWireup="true" %> <script type="text/C#" runat="server"> protected void TreeView1_TreeNodePopulate(Object sender, TreeNodeEventArgs e) { // This method is never called... } </script> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <asp:TreeView ID="TreeView1" runat="server" DataSourceID="XmlDataSource1" OnTreeNodePopulate="TreeView1_TreeNodePopulate" ExpandDepth="0"> <DataBindings> <asp:TreeNodeBinding DataMember="#" TextField="#" ValueField="#" PopulateOnDemand="true" /> </DataBindings> </asp:TreeView> <asp:XmlDataSource ID="XmlDataSource1" runat="server" DataFile="Sample.xml" /> </div> </form> </body> </html> The Sample.xml can be any xml file you want, it doesn't really matter. I tried to put a breakpoint within the TreeView1_TreeNodePopulate method and it was never hit. I also tried to: Set a TreeNodeBinding for each possible data member with PopulateOnDemand="true". Via code, go through all tree nodes and set their PopulateOnDemand property to true. Nothing worked. The only way the populate-on-demand thing worked was when I added nodes manually to the nodes instead of binding it to a data source. What am I doing wrong?

    Read the article

  • Managed (.net) library with html-tidy like functionality?

    - by Eamon Nerbonne
    Does anybody know of an html cleaner for .NET that can parse html and (for instance) convert it to a more machine friendly format such as xhtml? I've tried the HTML Agility Pack, but that fails to correctly parse even fairly simple examples. To give an example of html that should be parsed correctly: <html><body> <ul><li>TestElem1 <li>TestElem2 <li>TestElem3 List: <ul><li>Nested1 <li>Nested2</li> <li>Nested3 </ul> <li>TestElem4 </ul> <p>paragraph 1 <p>paragraph 2 <p>paragraph 3 </body></html> li tags don't need to be closed (see spec), and neither do P tags. In other words, the above sample should be parsed as: <html><body> <ul><li>TestElem1</li> <li>TestElem2</li> <li>TestElem3 List: <ul><li>Nested1</li> <li>Nested2</li> <li>Nested3</li> </ul></li> <li>TestElem4</li> </ul> <p>paragraph 1</p> <p>paragraph 2</p> <p>paragraph 3</p> </body></html> Since the aim is to use the library on various machines, it's a big disadvantage to need to fall back to native code (such as a wrapper around html tidy) which would require extra deployment hassle and sacrifice platform independance. Any suggestions? To recap, I'm looking for: An html cleaner ala HTML tidy Must be able to deal with real world html, not just xhtml, at the very least correctly reading valid html 4 Must be able to convert to a more easily processable xml format Should be a purely managed app.

    Read the article

  • ASP.NET site move to IIS7 results in gibberish characters in page output

    - by frankadelic
    I have an ASP.NET site that was working fine running on Windows Server 2003 / IIS6. I moved it to Windows Server 2008 / IIS7 and the aspx page output now includes gibberish text. For example: p???? ????? The majority of the page renders properly, but there is gibberish here and there. I have checked the event logs and there is nothing. Any idea what's going on here? How can I fix this? I have noticed that this issue shows up when I include multiple Server.Execute statements in the aspx code: <% Server.Execute("/inc/top.inc"); %> <% Server.Execute("/inc/footer.inc"); %> The .inc files above contain just html. It appears that the files have to be of a significant length to cause the error. Here is the sample html I've been testing with: <div class="logo"> <a href="/"> <img src="/logo.png" alt="logo" width="31" height="29" class="logoimg" /> </a> </div> <div class="logo"> <a href="/"> <img src="/logo.png" alt="logo" width="31" height="29" class="logoimg" /> </a> </div> <div class="logo"> <a href="/"> <img src="/logo.png" alt="logo" width="31" height="29" class="logoimg" /> </a> </div> <div class="logo"> <a href="/"> <img src="/logo.png" alt="logo" width="31" height="29" class="logoimg" /> </a> </div> <div class="logo"> <a href="/"> <img src="/logo.png" alt="logo" width="31" height="29" class="logoimg" /> </a> </div> <div class="logo"> <a href="/"> <img src="/logo.png" alt="logo" width="31" height="29" class="logoimg" /> </a> </div> Also, the gibberish characters appear inconsistently. If I ctrl+F5 the pages, the gibberish characters change and occasionally don't appear at all.

    Read the article

  • WCF using Spring.NET woes

    - by demius
    Hi everyone, I've torn out all but two hairs on my head trying to get my WCF services hosted in IIS 7.5. I'm using Spring.NET to create my service instances, but I'm having no luck getting it up and running. I encounter the following exception: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are []. My WCF configuration is as follows: <system.serviceModel> <bindings> <wsHttpBinding> <binding name="secureBinding" allowCookies="false"> <security mode="Transport"> <transport clientCredentialType="None"> <extendedProtectionPolicy policyEnforcement="Never" /> </transport> </security> </binding> </wsHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior> <serviceMetadata httpGetEnabled="true" httpsGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> <services> <service name="TestService"> <host> <baseAddresses> <add baseAddress="https://ws.local.com/TestService.svc"/> </baseAddresses> </host> <endpoint name="secureEndpoint" contract="Services.Interfaces.ITestService" binding="wsHttpBinding" bindingConfiguration="secureBinding" address="https://ws.local.com/TestService.svc" /> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> </service> </services> <serviceHostingEnvironment multipleSiteBindingsEnabled="true" /> What am I missing here?

    Read the article

  • Using Apple’s Bonjour service from .NET?

    - by Martín Marconcini
    I have an iPhone app that publishes through Bonjour. The Mac counterpart works, they sync and exchange data. Now I have to port that little Mac app to Windows. I’ve decided to go with .NET (because that’s what I know). The app is not complex, but I’m in the early stages. I need to browse/discover Bonjour services. For this task, I’ve downloaded Mono.Zeroconf and Apple’s latest SDK (which includes a couple of C# Samples). I’m not really pasting code because I’m really copy/pasting the samples. In fact, Mono.Zeroconf has a MZClient.exe that can be used to test “all the API”. My 1st test was -on the same box- open two cmd.exe and launch a MZclient registering a service and on the other, launch it and “discover it”. It doesn’t work. Here’s the server: C:\MZ>MZClient -v -p "_http._tcp 80 mysimpleweb” *** Registering name = 'mysimpleweb', type = '_http._tcp', domain = 'local.' *** Registered name = ‘mysimpleweb’ On the other terminal: c:\MZ>MZClient -v -t "_http._tcp" Creating a ServiceBrowser with the following settings: Interface = 0 (All) Address Protocol = Any Domain = local Registration Type = _http._tcp Resolve Shares = False Hit ^C when you're bored waiting for responses. And that’s it. Nothing happens. I’ve of course tried with different services to no avail. Even played a little bit with that domain thing. Remember this is the same box. I tried on another computer, because this was a VM inside OSX, so I went ahead and tried on a “pure” win XP. Nothing. note: I have Apple Bonjour Service (up and running) and also the Apple SDK (installed later). Given that this didn’t work, I went ahead and decided to try the Apple SDK which has an Interop and a few pre-compiled samples (and its source code). Short story, neither the mDSNBrowser.exe nor the SimpleChat.exe work/see/discover anything. My box is a Win7 under Parallels, but that doesn’t seem to be affecting anything, given that the native XP exhibits the same problems. What am I doing so awfully wrong?

    Read the article

  • how to change a button into a imagebutton in asp.net c#

    - by sweetsecret
    How to change the button into image button... the button in the beginning has "Pick a date" when clicked a calender pops out and the when a date is selected a label at the bottom reading the date comes in and the text on the button changes to disabled... i want to palce a imagebutton having a image icon of the calender and rest of the function will be the same.... the code as follows: using System; using System.Collections.Generic; using System.ComponentModel; using System.Text; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; [assembly: TagPrefix("DatePicker", "EWS")] namespace EclipseWebSolutions.DatePicker { [DefaultProperty("Text")] [ToolboxData("<{0}:DatePicker runat=server")] [DefaultEvent("SelectionChanged")] [ValidationProperty("TextValue")] public class DatePicker : WebControl, INamingContainer { #region Properties public TextBox txtDate = new TextBox(); public Calendar calDate = new Calendar(); public Button btnDate = new Button(); public Panel pnlCalendar = new Panel(); private enum ViewStateConstants { ValidationGroup, RegularExpression, ErrorMessage, RegExText, CalendarPosition, FormatString, ExpandLabel, CollapseLabel, ApplyDefaultStyle, CausesValidation, } /// <summary> /// Defines the available display modes of this calendar. /// </summary> public enum CalendarDisplay { DisplayRight, DisplayBelow } /// <summary> /// Where to display the popup calendar. /// </summary> [Category("Behaviour")] [Localizable(true)] public CalendarDisplay CalendarPosition { get { if (ViewState[ViewStateConstants.CalendarPosition.ToString()] == null) { ViewState[ViewStateConstants.CalendarPosition.ToString()] = CalendarDisplay.DisplayRight; } return (CalendarDisplay)ViewState[ViewStateConstants.CalendarPosition.ToString()]; } set { ViewState[ViewStateConstants.CalendarPosition.ToString()] = value; } } /// <summary> /// Text version of the control's value, for use by ASP.NET validators. /// </summary> public string TextValue { get { return txtDate.Text; } } /// <summary> /// Holds the current date value of this control. /// </summary> [Category("Behaviour")] [Localizable(true)] [Bindable(true, BindingDirection.TwoWay)] public DateTime DateValue { get { try { if (txtDate.Text == "") return DateTime.MinValue; DateTime val = DateTime.Parse(txtDate.Text); return val; } catch (ArgumentNullException) { return DateTime.MinValue; } catch (FormatException) { return DateTime.MinValue; } } set { if (value == DateTime.MinValue) { txtDate.Text = ""; } else { txtDate.Text = value.ToShortDateString(); } } } [Category("Behavior"), Themeable(false), DefaultValue("")] public virtual string ValidationGroup { get { if (ViewState[ViewStateConstants.ValidationGroup.ToString()] == null) { return string.Empty; } else { return (string)ViewState[ViewStateConstants.ValidationGroup.ToString()]; } } set { ViewState[ViewStateConstants.ValidationGroup.ToString()] = value; } } /// <summary> /// The label of the exand button. Shown when the calendar is hidden. /// </summary> [Bindable(true)] [Category("Appearance")] [DefaultValue("PickDate")] [Localizable(true)] public string ExpandButtonLabel { get { String s = (String)ViewState[ViewStateConstants.ExpandLabel.ToString()]; return ((s == null) ? "PickDate" : s); } set { ViewState[ViewStateConstants.ExpandLabel.ToString()] = value; } } /// <summary> /// The label of the collapse button. Shown when the calendar is visible. /// </summary> [Bindable(true)] [Category("Appearance")] [DefaultValue("Disabled")] [Localizable(true)] public string CollapseButtonLabel { get { String s = (String)ViewState[ViewStateConstants.CollapseLabel.ToString()]; return ((s == null) ? "Disabled" : s); } set { ViewState[ViewStateConstants.CollapseLabel.ToString()] = value; } } /// <summary> /// Whether to apply the default style. Disable this if you want to apply a custom style, or to use themes and skins /// to style the control. /// </summary> [Category("Appearance")] [DefaultValue(true)] [Localizable(true)] public bool ApplyDefaultStyle { get { if (ViewState[ViewStateConstants.ApplyDefaultStyle.ToString()] == null) { ViewState[ViewStateConstants.ApplyDefaultStyle.ToString()] = true; } return (bool)ViewState[ViewStateConstants.ApplyDefaultStyle.ToString()]; } set { ViewState[ViewStateConstants.ApplyDefaultStyle.ToString()] = value; } } /// <summary> /// Causes Validation /// </summary> [Category("Appearance")] [DefaultValue(false)] [Localizable(false)] public bool CausesValidation { get { if (ViewState[ViewStateConstants.CausesValidation.ToString()] == null) { ViewState[ViewStateConstants.CausesValidation.ToString()] = false; } return (bool)ViewState[ViewStateConstants.CausesValidation.ToString()]; } set { ViewState[ViewStateConstants.CausesValidation.ToString()] = value; btnDate.CausesValidation = value; } } #endregion #region Events /// <summary> /// A day was selected from the calendar control. /// </summary> public event EventHandler SelectionChanged; protected virtual void OnSelectionChanged() { if (SelectionChanged != null) // only raise the event if someone is listening. { SelectionChanged(this, EventArgs.Empty); } } #endregion #region Event Handlers /// <summary> /// The +/- button was clicked. /// </summary> protected void btnDate_Click(object sender, System.EventArgs e) { if (!calDate.Visible) { // expand the calendar calDate.Visible = true; txtDate.Enabled = false; btnDate.Text = CollapseButtonLabel; if (DateValue != DateTime.MinValue) { calDate.SelectedDate = DateValue; calDate.VisibleDate = DateValue; } } else { // collapse the calendar calDate.Visible = false; txtDate.Enabled = true; btnDate.Text = ExpandButtonLabel; } } /// <summary> /// A date was selected from the calendar. /// </summary> protected void calDate_SelectionChanged(object sender, System.EventArgs e) { calDate.Visible = false; txtDate.Visible = true; btnDate.Text = ExpandButtonLabel; txtDate.Enabled = true; txtDate.Text = calDate.SelectedDate.ToShortDateString(); OnSelectionChanged(); } #endregion /// <summary> /// Builds the contents of this control. /// </summary> protected override void CreateChildControls() { btnDate.Text = ExpandButtonLabel; btnDate.CausesValidation = CausesValidation; txtDate.ID = "txtDate"; calDate.Visible = false; if (ApplyDefaultStyle) { calDate.BackColor = System.Drawing.Color.White; calDate.BorderColor = System.Drawing.Color.FromArgb(10066329); calDate.CellPadding = 2; calDate.DayNameFormat = DayNameFormat.Shortest; calDate.Font.Name = "Verdana"; calDate.Font.Size = FontUnit.Parse("8pt"); calDate.ForeColor = System.Drawing.Color.Black; calDate.Height = new Unit(150, UnitType.Pixel); calDate.Width = new Unit(180, UnitType.Pixel); calDate.DayHeaderStyle.BackColor = System.Drawing.Color.FromArgb(228, 228, 228); calDate.DayHeaderStyle.Font.Size = FontUnit.Parse("7pt"); calDate.TitleStyle.Font.Bold = true; calDate.WeekendDayStyle.BackColor = System.Drawing.Color.FromArgb(255, 255, 204); } ConnectEventHandlers(); pnlCalendar.Controls.Add(calDate); pnlCalendar.Style["position"] = "absolute"; pnlCalendar.Style["filter"] = "alpha(opacity=95)"; pnlCalendar.Style["-moz-opacity"] = ".95"; pnlCalendar.Style["opacity"] = ".95"; pnlCalendar.Style["z-index"] = "2"; pnlCalendar.Style["background-color"] = "White"; if (CalendarPosition == CalendarDisplay.DisplayBelow) { pnlCalendar.Style["margin-top"] = "27px"; } else { pnlCalendar.Style["display"] = "inline"; } Controls.Add(txtDate); Controls.Add(pnlCalendar); Controls.Add(btnDate); base.CreateChildControls(); } /// <summary> /// Render the contents of this control. /// </summary> /// <param name="output">The HtmlTextWriter to use.</param> protected override void RenderContents(HtmlTextWriter output) { switch (CalendarPosition) { case CalendarDisplay.DisplayRight: { txtDate.RenderControl(output); btnDate.RenderControl(output); pnlCalendar.RenderControl(output); break; } case CalendarDisplay.DisplayBelow: { pnlCalendar.RenderControl(output); txtDate.RenderControl(output); btnDate.RenderControl(output); break; } } } /// <summary> /// Connect event handlers to events. /// </summary> private void ConnectEventHandlers() { btnDate.Click += new System.EventHandler(btnDate_Click); calDate.SelectionChanged += new System.EventHandler(calDate_SelectionChanged); } } } using System; using System.Collections.Generic; using System.ComponentModel; using System.Text; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; [assembly: TagPrefix("DatePicker", "EWS")] namespace EclipseWebSolutions.DatePicker { [DefaultProperty("Text")] [ToolboxData("<{0}:DatePicker runat=server")] [DefaultEvent("SelectionChanged")] [ValidationProperty("TextValue")] public class DatePicker : WebControl, INamingContainer { #region Properties public TextBox txtDate = new TextBox(); public Calendar calDate = new Calendar(); public Button btnDate = new Button(); public Panel pnlCalendar = new Panel(); private enum ViewStateConstants { ValidationGroup, RegularExpression, ErrorMessage, RegExText, CalendarPosition, FormatString, ExpandLabel, CollapseLabel, ApplyDefaultStyle, CausesValidation, } /// <summary> /// Defines the available display modes of this calendar. /// </summary> public enum CalendarDisplay { DisplayRight, DisplayBelow } /// <summary> /// Where to display the popup calendar. /// </summary> [Category("Behaviour")] [Localizable(true)] public CalendarDisplay CalendarPosition { get { if (ViewState[ViewStateConstants.CalendarPosition.ToString()] == null) { ViewState[ViewStateConstants.CalendarPosition.ToString()] = CalendarDisplay.DisplayRight; } return (CalendarDisplay)ViewState[ViewStateConstants.CalendarPosition.ToString()]; } set { ViewState[ViewStateConstants.CalendarPosition.ToString()] = value; } } /// <summary> /// Text version of the control's value, for use by ASP.NET validators. /// </summary> public string TextValue { get { return txtDate.Text; } } /// <summary> /// Holds the current date value of this control. /// </summary> [Category("Behaviour")] [Localizable(true)] [Bindable(true, BindingDirection.TwoWay)] public DateTime DateValue { get { try { if (txtDate.Text == "") return DateTime.MinValue; DateTime val = DateTime.Parse(txtDate.Text); return val; } catch (ArgumentNullException) { return DateTime.MinValue; } catch (FormatException) { return DateTime.MinValue; } } set { if (value == DateTime.MinValue) { txtDate.Text = ""; } else { txtDate.Text = value.ToShortDateString(); } } } [Category("Behavior"), Themeable(false), DefaultValue("")] public virtual string ValidationGroup { get { if (ViewState[ViewStateConstants.ValidationGroup.ToString()] == null) { return string.Empty; } else { return (string)ViewState[ViewStateConstants.ValidationGroup.ToString()]; } } set { ViewState[ViewStateConstants.ValidationGroup.ToString()] = value; } } /// <summary> /// The label of the exand button. Shown when the calendar is hidden. /// </summary> [Bindable(true)] [Category("Appearance")] [DefaultValue("PickDate")] [Localizable(true)] public string ExpandButtonLabel { get { String s = (String)ViewState[ViewStateConstants.ExpandLabel.ToString()]; return ((s == null) ? "PickDate" : s); } set { ViewState[ViewStateConstants.ExpandLabel.ToString()] = value; } } /// <summary> /// The label of the collapse button. Shown when the calendar is visible. /// </summary> [Bindable(true)] [Category("Appearance")] [DefaultValue("Disabled")] [Localizable(true)] public string CollapseButtonLabel { get { String s = (String)ViewState[ViewStateConstants.CollapseLabel.ToString()]; return ((s == null) ? "Disabled" : s); } set { ViewState[ViewStateConstants.CollapseLabel.ToString()] = value; } } /// <summary> /// Whether to apply the default style. Disable this if you want to apply a custom style, or to use themes and skins /// to style the control. /// </summary> [Category("Appearance")] [DefaultValue(true)] [Localizable(true)] public bool ApplyDefaultStyle { get { if (ViewState[ViewStateConstants.ApplyDefaultStyle.ToString()] == null) { ViewState[ViewStateConstants.ApplyDefaultStyle.ToString()] = true; } return (bool)ViewState[ViewStateConstants.ApplyDefaultStyle.ToString()]; } set { ViewState[ViewStateConstants.ApplyDefaultStyle.ToString()] = value; } } /// <summary> /// Causes Validation /// </summary> [Category("Appearance")] [DefaultValue(false)] [Localizable(false)] public bool CausesValidation { get { if (ViewState[ViewStateConstants.CausesValidation.ToString()] == null) { ViewState[ViewStateConstants.CausesValidation.ToString()] = false; } return (bool)ViewState[ViewStateConstants.CausesValidation.ToString()]; } set { ViewState[ViewStateConstants.CausesValidation.ToString()] = value; btnDate.CausesValidation = value; } } #endregion #region Events /// <summary> /// A day was selected from the calendar control. /// </summary> public event EventHandler SelectionChanged; protected virtual void OnSelectionChanged() { if (SelectionChanged != null) // only raise the event if someone is listening. { SelectionChanged(this, EventArgs.Empty); } } #endregion #region Event Handlers /// <summary> /// The +/- button was clicked. /// </summary> protected void btnDate_Click(object sender, System.EventArgs e) { if (!calDate.Visible) { // expand the calendar calDate.Visible = true; txtDate.Enabled = false; btnDate.Text = CollapseButtonLabel; if (DateValue != DateTime.MinValue) { calDate.SelectedDate = DateValue; calDate.VisibleDate = DateValue; } } else { // collapse the calendar calDate.Visible = false; txtDate.Enabled = true; btnDate.Text = ExpandButtonLabel; } } /// <summary> /// A date was selected from the calendar. /// </summary> protected void calDate_SelectionChanged(object sender, System.EventArgs e) { calDate.Visible = false; txtDate.Visible = true; btnDate.Text = ExpandButtonLabel; txtDate.Enabled = true; txtDate.Text = calDate.SelectedDate.ToShortDateString(); OnSelectionChanged(); } #endregion /// <summary> /// Builds the contents of this control. /// </summary> protected override void CreateChildControls() { btnDate.Text = ExpandButtonLabel; btnDate.CausesValidation = CausesValidation; txtDate.ID = "txtDate"; calDate.Visible = false; if (ApplyDefaultStyle) { calDate.BackColor = System.Drawing.Color.White; calDate.BorderColor = System.Drawing.Color.FromArgb(10066329); calDate.CellPadding = 2; calDate.DayNameFormat = DayNameFormat.Shortest; calDate.Font.Name = "Verdana"; calDate.Font.Size = FontUnit.Parse("8pt"); calDate.ForeColor = System.Drawing.Color.Black; calDate.Height = new Unit(150, UnitType.Pixel); calDate.Width = new Unit(180, UnitType.Pixel); calDate.DayHeaderStyle.BackColor = System.Drawing.Color.FromArgb(228, 228, 228); calDate.DayHeaderStyle.Font.Size = FontUnit.Parse("7pt"); calDate.TitleStyle.Font.Bold = true; calDate.WeekendDayStyle.BackColor = System.Drawing.Color.FromArgb(255, 255, 204); } ConnectEventHandlers(); pnlCalendar.Controls.Add(calDate); pnlCalendar.Style["position"] = "absolute"; pnlCalendar.Style["filter"] = "alpha(opacity=95)"; pnlCalendar.Style["-moz-opacity"] = ".95"; pnlCalendar.Style["opacity"] = ".95"; pnlCalendar.Style["z-index"] = "2"; pnlCalendar.Style["background-color"] = "White"; if (CalendarPosition == CalendarDisplay.DisplayBelow) { pnlCalendar.Style["margin-top"] = "27px"; } else { pnlCalendar.Style["display"] = "inline"; } Controls.Add(txtDate); Controls.Add(pnlCalendar); Controls.Add(btnDate); base.CreateChildControls(); } /// <summary> /// Render the contents of this control. /// </summary> /// <param name="output">The HtmlTextWriter to use.</param> protected override void RenderContents(HtmlTextWriter output) { switch (CalendarPosition) { case CalendarDisplay.DisplayRight: { txtDate.RenderControl(output); btnDate.RenderControl(output); pnlCalendar.RenderControl(output); break; } case CalendarDisplay.DisplayBelow: { pnlCalendar.RenderControl(output); txtDate.RenderControl(output); btnDate.RenderControl(output); break; } } } /// <summary> /// Connect event handlers to events. /// </summary> private void ConnectEventHandlers() { btnDate.Click += new System.EventHandler(btnDate_Click); calDate.SelectionChanged += new System.EventHandler(calDate_SelectionChanged); } } } <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" % <%@ Register Assembly="EclipseWebSolutions.DatePicker" Namespace="EclipseWebSolutions.DatePicker" TagPrefix="ews" % Untitled Page       using System; using System.Data; using System.Configuration; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { } protected void DatePicker1_SelectionChanged(object sender, EventArgs e) { Label1.Text = DatePicker1.DateValue.ToShortDateString(); pnlLabel.Update(); } }

    Read the article

  • MySql multiple selects batching in .net

    - by Amith George
    I have a situation in my application. For each x-axis point in my chart, I am plotting 5 y-axis values. To calculate each of these 5 values, I need to make 4 different queries. Ie, for each x-axis point I need to fire 20 sql queries. Now, I need to plot 40 such points in the my chart. Its resulting in a pathetic performance where it takes close to a minute to get all the data back from the database. Each of 4 different queries consists of a join between 2 tables. One has only 6 rows. The other close to 10,000. Each of the 4 queries has different WHERE clauses, so they are different queries. For each point in the x-axis, only the values for the where clauses change. I have tried combining each of the 4 queries into one big string. Basically batch the four selects. These are again batched for each y-axis value. So, for each x-axis point, I am now firing one big command that consists of 20 different select statements. Technically, I should be experiencing a big performance boost, right? Instead of hitting the db 40x5x4 = 800 times, I am now hitting it just 40 times. But instead of taking 60 seconds, it taking 50-55 seconds... not much of a help. I am using MySql 5.1, and the 6.1 version of its .Net connector. What can I do to improve the performance? Edit: One of the 4 queries is as follows: SELECT SUM(TIME_TO_SEC(TIMEDIFF(T1.col2, T1.col1))* T2.col1 / (3600 *1000)) AS TotalTime FROM Table T1 JOIN Table T2 ON T1.col3 = T2.col3 WHERE T1.col4 = 'i' AND T1.col1 >= '2009-12-25 00:00:00' AND T1.col2 <= '2009-12-26 00:00:00'; The other 3 queries are similar, only the where clause changes slightly. This set of 4 queries is fired 5 times. The first 3 times against the join of table T1 and T2, passing in different values for col4. And the next two times against the join of table T3 and T2 passing in different values for col4. These 5 values are the y-axis values for a particular x-axis point. The data returned by all these queries is the same format. so, we tried doing a UNION ALL on all these queries. No substantial difference. One strange thing, however, after indexing the foreign key on the table T1 [while it contained over a lakh records], the queries were using the index, but they had become slower. At times, the queries would take double the time to return the data.

    Read the article

  • .NET RegEx "Memory Leak" investigation

    - by Kevin Pullin
    I recently looked into some .NET "memory leaks" (i.e. unexpected, lingering GC rooted objects) in a WinForms app. After loading and then closing a huge report, the memory usage did not drop as expected even after a couple of gen2 collections. Assuming that the reporting control was being kept alive by a stray event handler I cracked open WinDbg to see what was happening... Using WinDbg, the !dumpheap -stat command reported a large amount of memory was consumed by string instances. Further refining this down with the !dumpheap -type System.String command I found the culprit, a 90MB string used for the report, at address 03be7930. The last step was to invoke !gcroot 03be7930 to see which object(s) were keeping it alive. My expectations were incorrect - it was not an unhooked event handler hanging onto the reporting control (and report string), but instead it was held on by a System.Text.RegularExpressions.RegexInterpreter instance, which itself is a descendant of a System.Text.RegularExpressions.CachedCodeEntry. Now, the caching of Regexs is (somewhat) common knowledge as this helps to reduce the overhead of having to recompile the Regex each time it is used. But what then does this have to do with keeping my string alive? Based on analysis using Reflector, it turns out that the input string is stored in the RegexInterpreter whenever a Regex method is called. The RegexInterpreter holds onto this string reference until a new string is fed into it by a subsequent Regex method invocation. I'd expect similar behaviour by hanging onto Regex.Match instances and perhaps others. The chain is something like this: Regex.Split, Regex.Match, Regex.Replace, etc Regex.Run RegexScanner.Scan (RegexScanner is the base class, RegexInterpreter is the subclass described above). The offending Regex is only used for reporting, rarely used, and therefore unlikely to be used again to clear out the existing report string. And even if the Regex was used at a later point, it would probably be processing another large report. This is a relatively significant problem and just plain feels dirty. All that said, I found a few options on how to resolve, or at least work around, this scenario. I'll let the community respond first and if no takers come forward I will fill in any gaps in a day or two.

    Read the article

  • SQL server timeout 2000 from C# .NET

    - by Johnny Egeland
    I have run into a strange problem using SQL Server 2000 and two linked server. For two years now our solution has run without a hitch, but suddenly yesterday a query synchronizing data from one of the databases to the other started timing out. I connect to a server in the production network, which is linked to a server containing orders I need data from. The query contains a few joins, but basically this summarizes what is done: INSERT INTO ProductionDataCache (column1, column2, ...) SELECT tab1.column1, tab1.column2, tab2.column1, tab3.column1 ... FROM linkedserver.database.dbo.Table1 AS tab1 JOIN linkedserver.database.dbo.Table2 AS tab2 ON (...) JOIN linkedserver.database.dbo.Tabl32 AS tab3 ON (...) ... WHERE tab1.productionOrderId = @id ORDER BY ... Obviously my first attempt to fix the problem was to increase the timeout limit from the original 5 minutes. But when I arrived at 30 minutes and still got a timeout, I started to suspect something else was going on. A query just does not go from executing in less than 5 minutes to over 30 minutes over night. I outputted the SQL query (which was originally in the C# code) to my logs, and decided to execute the query in the Query Analyzer directly on the database server. To my big surprise, the query executed correctly in less than 10 seconds. So I isolated the SQL execution in a simple test program, and observed the same query time out both on the server originally running this solution AND when running it locally on the database server. Also I have tried to create a Stored Procedure and execute this from the program, but this also times out. Running it in Query Analyzer works fine in less than a few seconds. It seems that the problem only occurs when I execute this query from the C# program. Has anyone seen such behavior before, and found a solution for it? UPDATE: I have now used SQL Profiler on the server. The obvious difference is that when executing the query from the .NET program, it shows up in the log as "exec sp_executesql N'INSERT INTO ...'", but when executing from Query Analyzer it occurs as a normal query in the log. Further I tried to connect the SQL Query Analyzer using the same SQL user as the program, and this triggered the problem in Query Analyzer as well. So it seems the problem only occurs when connecting via TCP/IP using a sql user.

    Read the article

  • When does the .NET FormAuthentication ticket get checked and how do I tap into this event?

    - by Mustafakidd
    Hello everyone - We are attempting to integrate an ASP.NET MVC site with our client's SSO system using PingFederate. I would like to use the built in FormsAuthentication framework to do this. The way I've gone about it so far is: Set up my Web.config so that my FormsAuthentication LoginURL goes to my site's "BeginAuthentication" action on a "Security" controller. From this action, I set up some session variables (what URL was being accessed, for example, since Ping won't send this info back to me), and then redirect to our client's login page on an external site (www.client.com/Login for example). From here, the authentication takes place and a cookie is generated on the same domain as the one that our application is running on which contains the unique identifier of the authenticated user, I've set it up so that once this happens, the Ping server will redirect to my "EndAuthentication" action on my "Security" controller. In this action, I call my membership class's "ValidateUser" method which takes this unique identifier from the cookie and loads in the user on our application that this ID refers to. I save that logged in user in our Session (Session["LoggedInAs"], for example) and expire the cookie that contains the id of the authenticated user that the SSO system provided for me. All of this works well. The issue I'm wondering about is what happens after our user has already authenticated and manually goes back to our client's login page (www.client.com/login) and logs in as another user. If they do that, then the flow from #2 above to number 3 happens as normal - but since there already exists an authenticated user on our site, it seems as though the FormsAuthentication system doesn't bother kicking off anything so I don't get a chance to check for the cookie I'm looking for to login as this new user. What I'd like to do is, somewhere in my Global.asax file (probably FormsAuthenticate_OnAuthenticate), check to see if the cookie that the SSO system sends to me exists, and if so, sign out of the application using FormsAuthentication.SignOut(). Another issue that seems to be related is that if I let my Session expire, the FormsAuthentication still seems to think I am authenticated and it lets me access a page even though no currently logged in user exists in my Session, so the page doesn't render correctly. Should I tap into the Session_End event and do FormsAuthentication.SignOut() here as well? Basically, I want to know when the authentication ticket created by System.Web.Security.FormsAuthentication.SetAuthCookie(..) gets checked in the flow of a request so that I can determine whether I need to SignOut() and force revalidation or not. Thanks for any help. Sorry for the length of this message, trying to be as detailed as possible. Mustafa

    Read the article

  • Best practices for developing simple ASP.NET sites (built in controls or JQuery + scripts)

    - by Nix
    I was recently reviewing some code written by two different contractors, both were basic ASP.NET management sites. The sites allowed the user to view and edit data. Pretty much simple CRUD gateways. One group did their best to use built in ASP + AJAX Toolkit controls and did their best to use as many built in controls as possible. I found the code much easier to read and maintain. The other used jQuery and the code is heavily marked up with script blocks which are then used to build pages from javascript files. Which one is more common? The one that basically leveraged embedded HTML markup in scripts controled by javascript files screams readability and maintenance issues? Is this just the way of doing asp dev with jQuery? Assuming the second example happens a lot, are there tools that help facilitate jQuery development with visual studio? Do you think they generated the html somewhere else and just copied it in? Example Script block: <script id="HRPanel" type="text/html"> <table cellpadding='0' cellspacing='0' class="atable"><thead class="mHeader"><tr><th>Name</th><th>Description</th><th>Other</th></thead><tbody> <# for(var i=0; i < hrRows.length; i++) { var r = HRRows[i]; #> <tr><td><#=r.Name#></td><td><#=r.Description#></td><td class="taRight"><#=r.Other#></td></tr> <#}#> </tbody><tfoot><th></th><th></th><th></th></tfoot></table> </script> Then in a separate location (js file) you would see something like this. $("#HRPanel").html($("#HRPanel").parseTemplate({ HRRows: response.something.bah.bah }));

    Read the article

  • Pattern Recognition for image comparision in .net

    - by vinod R
    hi Can anybody share code or algorithm(using pattern recognition) for image comparision in .net . I need to compare 2 images of different resolution and textures and the find the difference . Now i have code to find the difference between 2 images using C# // Load the images. Bitmap bm1 = (Bitmap) (Image.FromFile(txtFile1.Text)); Bitmap bm2 = (Bitmap) (Image.FromFile(txtFile2.Text)); // Make a difference image. int wid = Math.Min(bm1.Width, bm2.Width); int hgt = Math.Min(bm1.Height, bm2.Height); Bitmap bm3 = new Bitmap(wid, hgt); // Create the difference image. bool are_identical = true; int r1; int g1; int b1; int r2; int g2; int b2; int r3; int g3; int b3; Color eq_color = Color.Transparent; Color ne_color = Color.Transparent; for (int x = 0; x <= wid - 1; x++) { for (int y = 0; y <= hgt - 1; y++) { if (bm1.GetPixel(x, y).Equals(bm2.GetPixel(x, y))) { bm3.SetPixel(x, y, eq_color); } else { bm1.SetPixel(x, y, ne_color); are_identical = false; } } } // Display the result. picResult.Image = bm1; Bitmap Logo = new Bitmap(picResult.Image); Logo.MakeTransparent(Logo.GetPixel(1, 1)); picResult.Image = (Image)Logo; //this.Cursor = Cursors.Default; if ((bm1.Width != bm2.Width) || (bm1.Height != bm2.Height)) { are_identical = false; } if (are_identical) { MessageBox.Show("The images are identical"); } else { MessageBox.Show("The images are different"); } //bm1.Dispose() // bm2.Dispose() BUT this compare if the 2 images are of same resolution and size.if some shadow is there on one image(but the 2 images are same) it shows the difference between the image..so i am trying to compare using pattern recognition. Thanks in advance

    Read the article

  • SELECT SQL statement problem when getting info from an accdb in VB.Net

    - by Shane Fagan
    Hi again all, im getting the error below for this SQL statement in VB.Net SQLString = "SELECT AllPropertyDetails.PropertyID, Street, Town, County, Acres, Quotas, ResidenceDetails, Status, HighestBid, AskingPrice FROM AllPropertyDetails " SQLString += "INNER JOIN Land ON AllPropertyDetails.PropertyID = Land.PropertyID " SQLString += "WHERE Deleted = False " If PriceRadioButton.Checked = True Then SQLString += "ORDER BY AskingPrice ASC" ElseIf AcresRadioButton.Checked = True Then SQLString += "ORDER BY Acres ASC" End If Any ideas why its not working? The fields in the DB and the table names seem ok but its not working :/ System.InvalidOperationException was unhandled Message="An error occurred creating the form. See Exception.InnerException for details. The error is: No value given for one or more required parameters." Source="AuctioneerProject" StackTrace: at AuctioneerProject.My.MyProject.MyForms.Create__Instance__[T](T Instance) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 190 at AuctioneerProject.My.MyProject.MyForms.get_LandReport() at AuctioneerProject.ReportsMenu.LandButton_Click(Object sender, EventArgs e) in C:\Users\admin\Desktop\Auctioneers\AuctioneerProject\AuctioneerProject\ReportsMenu.vb:line 4 at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData) at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.Run(ApplicationContext context) at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun() at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel() at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine) at AuctioneerProject.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 81 at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args) at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() InnerException: System.Data.OleDb.OleDbException ErrorCode=-2147217904 Message="No value given for one or more required parameters." Source="Microsoft Office Access Database Engine" StackTrace: at System.Data.OleDb.OleDbCommand.ExecuteCommandTextErrorHandling(OleDbHResult hr) at System.Data.OleDb.OleDbCommand.ExecuteCommandTextForSingleResult(tagDBPARAMS dbParams, Object& executeResult) at System.Data.OleDb.OleDbCommand.ExecuteCommandText(Object& executeResult) at System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult) at System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) at System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.OleDb.OleDbCommand.ExecuteReader() at AuctioneerProject.LandReport.load_Land() in C:\Users\admin\Desktop\Auctioneers\AuctioneerProject\AuctioneerProject\LandReport.vb:line 37 at AuctioneerProject.LandReport.PriceRadioButton_CheckedChanged(Object sender, EventArgs e) in C:\Users\admin\Desktop\Auctioneers\AuctioneerProject\AuctioneerProject\LandReport.vb:line 79 at System.Windows.Forms.RadioButton.OnCheckedChanged(EventArgs e) at System.Windows.Forms.RadioButton.set_Checked(Boolean value) at AuctioneerProject.LandReport.InitializeComponent() in C:\Users\admin\Desktop\Auctioneers\AuctioneerProject\AuctioneerProject\LandReport.designer.vb:line 40 at AuctioneerProject.LandReport..ctor() in C:\Users\admin\Desktop\Auctioneers\AuctioneerProject\AuctioneerProject\LandReport.vb:line 5 InnerException:

    Read the article

  • .NET Impersonate and file upload issues

    - by Jagd
    I have a webpage that allows a user to upload a file to a network share. When I run the webpage locally (within VS 2008) and try to upload the file, it works! However, when I deploy the website to the webserver and try to upload the file through the webpage, it doesn't work! The error being returned to me on the webserver says "Access to the path '\05prd1\emp\test.txt' is denied. So, obviously, this is a permissions issue. The network share is configured to allow full access both to me (NT authentication) and to the NETWORK SERVICE (which is .NET's default account and what we have set in our IIS application pool as the default user for this website). I have tried this with and without impersonation upon the webserver and neither way works, yet both ways work on my local machine (in other words, with and without impersonation works on my local machine). The code that does the file upload is below. Please note that the code below includes impersonation, but like I said above, I've tried it with and without impersonation and it's made no difference. if (fuCourses.PostedFile != null && fuCourses.PostedFile.ContentLength > 0) { System.Security.Principal.WindowsImpersonationContext impCtx; impCtx = ((System.Security.Principal.WindowsIdentity)User.Identity).Impersonate(); try { lblMsg.Visible = true; // The courses file to be uploaded HttpPostedFile file = fuCourses.PostedFile; string fName = file.FileName; string uploadPath = "\\\\05prd1\\emp\\"; // Get the file name if (fName.Contains("\\")) { fName = fName.Substring( fName.LastIndexOf("\\") + 1); } // Delete the courses file if it is already on \\05prd1\emp FileInfo fi = new FileInfo(uploadPath + fName); if (fi != null && fi.Exists) { fi.Delete(); } // Open new file stream on \\05prd1\emp and read bytes into it from file upload FileStream fs = File.Create(uploadPath + fName, file.ContentLength); using (Stream stream = file.InputStream) { byte[] b = new byte[4096]; int read; while ((read = stream.Read(b, 0, b.Length)) > 0) { fs.Write(b, 0, read); } } fs.Close(); lblMsg.Text = "File Successfully Uploaded"; lblMsg.ForeColor = System.Drawing.Color.Green; } catch (Exception ex) { lblMsg.Text = ex.Message; lblMsg.ForeColor = System.Drawing.Color.Red; } finally { impCtx.Undo(); } } Any help on this would be very appreciated!

    Read the article

  • ASP.NET Client to Server communication

    - by Nelson
    Can you help me make sense of all the different ways to communicate from browser to client in ASP.NET? I have made this a community wiki so feel free to edit my post to improve it. Specifically, I'm trying to understand in which scenario to use each one by listing how each works. I'm a little fuzzy on UpdatePanel vs CallBack (with ViewState): I know UpdatePanel always returns HTML while CallBack can return JSON. Any other major differences? ...and CallBack (without ViewState) vs WebMethod. CallBack goes through most of the Page lifecycle, WebMethod doesn't. Any other major differences? IHttpHandler Custom handler for anything (page, image, etc.) Only does what you tell it to do (light server processing) Page is an implementation of IHttpHandler If you don't need what Page provides, create a custom IHttpHandler If you are using Page but overriding Render() and not generating HTML, you probably can do it with a custom IHttpHandler (e.g. writing binary data such as images) By default can use the .axd or .ashx file extensions -- both are functionally similar .ashx doesn't have any built-in endpoints, so it's preferred by convention Regular PostBack (System.Web.UI.Page : IHttpHandler) Inherits Page Full PostBack, including ViewState and HTML control values (heavy traffic) Full Page lifecycle (heavy server processing) No JavaScript required Webpage flickers/scrolls since everything is reloaded in browser Returns full page HTML (heavy traffic) UpdatePanel (Control) Control inside Page Full PostBack, including ViewState and HTML control values (heavy traffic) Full Page lifecycle (heavy server processing) Controls outside the UpdatePanel do Render(NullTextWriter) Must use ScriptManager If no client-side JavaScript, it can fall back to regular PostBack with no JavaScript (?) No flicker/scroll since it's an async call, unless it falls back to regular postback. Can be used with master pages and user controls Has built-in support for progress bar Returns HTML for controls inside UpdatePanel (medium traffic) Client CallBack (Page, System.Web.UI.ICallbackEventHandler) Inherits Page Most of Page lifecycle (heavy server processing) Takes only data you specify (light traffic) and optionally ViewState (?) (medium traffic) Client must support JavaScript and use ScriptManager No flicker/scroll since it's an async call Can be used with master pages and user controls Returns only data you specify in format you specify (e.g. JSON, XML...) (?) (light traffic) WebMethod Class implements System.Web.Service.WebService HttpContext available through this.Context Takes only data you specify (light traffic) Server only runs the called method (light server processing) Client must support JavaScript No flicker/scroll since it's an async call Can be used with master pages and user controls Returns only data you specify, typically JSON (light traffic) Can create instance of server control to render HTML and sent back as string, but events, paging in GridView, etc. won't work PageMethods Essentially a WebMethod contained in the Page class, so most of WebMethod's bullet's apply Method must be public static, therefore no Page instance accessible HttpContext available through HttpContext.Current Accessed directly by URL Page.aspx/MethodName (e.g. with XMLHttpRequest directly or with library such as jQuery) Setting ScriptManager property EnablePageMethods="True" generates a JavaScript proxy for each WebMethod Cannot be used directly in user controls with master pages and user controls Any others?

    Read the article

  • Parsing XML with VB.net.

    - by SuperFurryToad
    I'm trying to make sense of a big data dump of XML that I need to write to a database using some VB.net code. I'm looking for some help getting started with the parsing code, specifically how to access the attribute values. <Product ID="523233" UserTypeID="Property" ParentID="523232"> <Name>My Property Name</Name> <AssetCrossReference AssetID="173501" Type=" Non Print old"> </AssetCrossReference> <AssetCrossReference AssetID="554740" Type=" Non Print old"> </AssetCrossReference> <AssetCrossReference AssetID="566495" Type=" Non Print old"> </AssetCrossReference> <AssetCrossReference AssetID="553014" Type="Non Print"> </AssetCrossReference> <AssetCrossReference AssetID="553015" Type="Non Print"> </AssetCrossReference> <AssetCrossReference AssetID="553016" Type="Non Print"> </AssetCrossReference> <AssetCrossReference AssetID="553017" Type="Non Print"> </AssetCrossReference> <AssetCrossReference AssetID="553018" Type="Non Print"> </AssetCrossReference> <Values> <Value AttributeID="5115">Section of main pool</Value> <Value AttributeID="5137">114 apartments, four floors, no lifts</Value> <Value AttributeID="5170">Property location</Value> <Value AttributeID="5164">2 key</Value> <Value AttributeID="5134">A comfortable property, the apartment is set on a pine-covered hillside - a scenic and peaceful location.</Value> <Value AttributeID="5200">YYY</Value> <Value AttributeID="5148">facilities include X,Y,Z</Value> <Value AttributeID="5067">Self Catering. </Value> <Value AttributeID="5221">Frequent organised daytime activities</Value> </Values> </Product> </Product> Thanks in advance for your help.

    Read the article

  • vb.net one dimensional string array manipulation difficulty

    - by Luay
    Hi, I am having some problems with manipulating a one dimensional string array in vb.net and would like your assistance please. My objective is to get 4 variables (if possible) from a file path. these variables are: myCountry, myCity, myStreet, Filename. All declared as string. The file location is also declared as string. so I have: Dim filePath As String to illustrate my problem and what I am trying to do I have the following examples: 1- C:\my\location\is\UK\Birmingham\Summer Road\this house.txt. In this example myCountry would be= UK. myCity= Birmingham. myStreet=Summer Road. Filename=this house.txt 2- C:\my Location\is\France\Lyon\that house.txt. here myCountry=France. myCity=Lyon. There is no street. Filename=that house.txt 3- C:\my Location is\Germany\the other house.txt Here myCountry=Germany. No city. No street. Filename=the other house.txt What I am trying to say is I have no idea before hand about the lenght of the string or the position of the variables I want. I also don't know if I am going to find/get a city or street name in the path. However I do now that i will get myCountry and it will be one of 5 options: UK, France, Germany, Spain, Italy. To tackle my problem, the first thing I did was Dim pathArr() As String = filePath.Split("\") to get the FileName I did: FileName = pathArr.Last To get myCountry I did: If filePath.Contains("UK") Then myCountry = "UK" ElseIf filePath.Contains("France") Then myCountry = "France" ElseIf filePath.Contains("Germany") Then myCountry = "Germany" ElseIf filePath.Contains("Spain") Then myCountry = "Spain" ElseIf filePath.Contains("Italy") Then myCountry = "Italy" End If in trying to figure out myCity and myStreet (and whether they exist in the string in the first place) I started with: Dim ind As Integer = Array.IndexOf(pathArr, myCountry) to get the index of the myCountry string. I thought I could make my way from there but I am stuck and don't know what to do next. Any help will be appreciated. Thanks

    Read the article

  • .NET Impersonate not working!

    - by Jagd
    I have a webpage that allows a user to upload a file to a network share. When I run the webpage locally (within VS 2008) and try to upload the file, it works! However, when I deploy the website to the webserver and try to upload the file through the webpage, it doesn't work! The error being returned to me on the webserver says "Access to the path '\05prd1\emp\test.txt' is denied. So, obviously, this is a permissions issue. The network share is configured to allow full access both to me (NT authentication) and to the NETWORK SERVICE (which is .NET's default account and what we have set in our IIS application pool as the default user for this website). I have tried this with and without authentication, and neither one works on the webserver, yet both ways works on my local machine. The code that does the file upload is below. Please note that the code below includes impersonation, but like I said above, I've tried it with and without impersonation and it's made no difference. if (fuCourses.PostedFile != null && fuCourses.PostedFile.ContentLength > 0) { System.Security.Principal.WindowsImpersonationContext impCtx; impCtx = ((System.Security.Principal.WindowsIdentity)User.Identity).Impersonate(); try { lblMsg.Visible = true; // The courses file to be uploaded HttpPostedFile file = fuCourses.PostedFile; string fName = file.FileName; string uploadPath = "\\\\05prd1\\emp\\"; // Get the file name if (fName.Contains("\\")) { fName = fName.Substring( fName.LastIndexOf("\\") + 1); } // Delete the courses file if it is already on \\05prd1\emp FileInfo fi = new FileInfo(uploadPath + fName); if (fi != null && fi.Exists) { fi.Delete(); } // Open new file stream on \\05prd1\emp and read bytes into it from file upload FileStream fs = File.Create(uploadPath + fName, file.ContentLength); using (Stream stream = file.InputStream) { byte[] b = new byte[4096]; int read; while ((read = stream.Read(b, 0, b.Length)) > 0) { fs.Write(b, 0, read); } } fs.Close(); lblMsg.Text = "File Successfully Uploaded"; lblMsg.ForeColor = System.Drawing.Color.Green; } catch (Exception ex) { lblMsg.Text = ex.Message; lblMsg.ForeColor = System.Drawing.Color.Red; } finally { impCtx.Undo(); } } Any help on this would be very appreciated!

    Read the article

  • Merits of .NET ORM data access methods Enity Framework vs. NHibernate vs. Subsonic vs. ADO.NET Datas

    - by Lloyd
    I have recently heard "fanboys" of different .NET ORM methodologies express strong, if not outlandish oppinions of other ORM methodologies. And frankly feel a bit in the dark. Could you please explain the key merits of each of these .NET ORM solutions? Entity Framework NHibernate Subsonic ADO.NET Datasets I have a good understanding of 1&4, and a cursory understanding of 2&3, but apparently not enough to understand the implied cultural perceptions of one towards the other.

    Read the article

  • What are the equivalent of the following .NET concepts (ASP.NET, IIS, Linq, etc.) in Java world?

    - by Richard77
    Hello, I'm the only one among my people who navigate in .NET water, the rest is in the Java world. So, I'd like to have some common points to talk with them. What are the equivalent concepts in Java for: (by concept, I mean the purpose of such technology) Visual Studio IIS Linq Development server that ships with VS (I don't know the name) NHibernate, Subsonic, ... ASP.NET WebForm (Is there any equivalent in Java with drag and drop) ASP.NET MVC etc.(Please, add some other concepts if they are important to know) Thanks for helping

    Read the article

  • Stuck on an ASP.NET/WCF WSDL Parsing Error

    - by Vaccano
    I have a WCF Web Service that my ASP.NET app uses. It has been working fine for quite some time. I just added in a Dev Express Grid (and the Dev Express DLLs) and a new page that uses them and now I am getting parsing errors on the WSDL. But the weird part is that it works fine on my machine but fails on the web server machine. (Both are connecting to the same web services WSDL.) Here is the error message I am getting: Server Error in '/MyWebAppWebDev' Application. -------------------------------------------------------------------------------- Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately. Parser Error Message: Reference.svcmap: Failed to generate code for the service reference 'MyWebAppService'. Cannot import wsdl:portType Detail: An exception was thrown while running a WSDL import extension: System.ServiceModel.Description.DataContractSerializerMessageContractImporter Error: Referenced type 'WebClientApp.MyWebAppService.ReferenceUpdatesDataContract, WebClientApp, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' with data contract name 'ReferenceUpdatesDataContract' in namespace 'http://schemas.datacontract.org/2004/07/MyWebAppServiceLibrary.DataContracts' cannot be used since it does not match imported DataContract. Need to exclude this type from referenced types. XPath to Error Source: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:portType[@name='IMyWebAppReferenceDataServiceLib'] Cannot import wsdl:binding Detail: There was an error importing a wsdl:portType that the wsdl:binding is dependent on. XPath to wsdl:portType: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:portType[@name='IMyWebAppReferenceDataServiceLib'] XPath to Error Source: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:binding[@name='MyWebAppServicesDefaultEndpoint'] Cannot import wsdl:port Detail: There was an error importing a wsdl:binding that the wsdl:port is dependent on. XPath to wsdl:binding: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:binding[@name='MyWebAppServicesDefaultEndpoint'] XPath to Error Source: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:service[@name='MyWebAppReferenceDataServiceLib']/wsdl:port[@name='MyWebAppServicesDefaultEndpoint'] Source Error: [No relevant source lines] Source File: /MyWebAppWebDev/App_WebReferences/MyWebAppService/ Line: 1 I am completely stumped on this. I have checked my web.config endpoint address and it is spot on (and notably is not in the error message above). Any ideas would be welcomed. Things I have tried: Giving permissions to C:\Windows\temp to my Website user name Giving permissions to C:\Windows\temp to my App pool user name Checking to see that none of my data contracts are generic and have IsReference=true in them.

    Read the article

  • Asp.Net GridView

    - by user329419
    I need to hide columns in GridView Then access the values of these in the GridViewSelectedIndexChanged using vb.net. When I set DataBound columns is false cant acces the values. Please help. <asp:GridView ID="GridView1" runat="server" AllowPaging="True" AllowSorting="True" AutoGenerateColumns="False" BorderStyle="Outset" CellPadding="4" DataSourceID="odsA02_Tracking" Font-Size="Small" ForeColor="#333333" GridLines="Vertical" Style="border-right: #0000ff thin solid; table-layout: auto; border-top: #0000ff thin solid; font-size: x-small; border-left: #0000ff thin solid; border-bottom: #0000ff thin solid; font-family: Arial; border-collapse: separate" PageSize="30"> <FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" /> <Columns> <asp:CommandField ShowSelectButton="True" /> <asp:BoundField DataField="Since" HeaderText="Submit Date" ReadOnly="True" SortExpression="Since" /> <asp:BoundField DataField="Started_By" HeaderText="Submitted By" SortExpression="Started_By" /> <asp:BoundField DataField="FullName" HeaderText="Client Name" ReadOnly="True" SortExpression="FullName" /> <asp:BoundField DataField="Product_Desc" HeaderText="Product" ReadOnly="True" SortExpression="Product_Desc" /> <asp:BoundField DataField="Branch_List" HeaderText="Branch" ReadOnly="True" SortExpression="Branch_List" /> <asp:BoundField DataField="Event_AssignedID" HeaderText="Assigned To" ReadOnly="True" SortExpression="Event_AssignedID" /> <asp:BoundField DataField="DaysElapsed" HeaderText="Days Open" ReadOnly="True" SortExpression="DaysElapsed" /> <asp:BoundField DataField="Status" HeaderText="Status" SortExpression="Status" /> <asp:BoundField DataField="Instance_ID" HeaderText="Instance_ID" SortExpression="Instance_ID" Visible=True /> <asp:TemplateField Visible=False> <ItemTemplate> <asp:HiddenField ID=hdnSeqID Value='<%#Eval("Seq_ID") %>' runat=server/> </ItemTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="FormCode" Visible=false> <ItemTemplate> <asp:HiddenField ID=hdnFormCode Value='<%#Eval("Form_Code") %>' runat=server/> </ItemTemplate> </asp:TemplateField> </Columns> Protected Sub GridView1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles GridView1.SelectedIndexChanged Dim Instance_ID As String Dim Seq_ID As String Dim Form_Code As String Dim PARMS As String Dim DestinationURL As String Dim DestinationParms As String 'fill text box's with values from selected row ' store values from selected row Dim seqID As String = CType(GridView1.SelectedRow.FindControl("hdnSeqID"), HiddenField).Value Dim formCode As String = CType(GridView1.SelectedRow.FindControl("hdnFormCode"), HiddenField).Value End Sub

    Read the article

  • Parallel For Loop - Problems when adding to a List - Possible .Net Bugs

    - by Kevin Crowell
    I am having some issues involving Parallel for loops and adding to a List. The problem is, the same code may generate different output at different times. I have set up some test code below. In this code, I create a List of 10,000 int values. 1/10th of the values will be 0, 1/10th of the values will be 1, all the way up to 1/10th of the values being 9. After setting up this List, I setup a Parallel for loop that iterates through the list. If the current number is 0, I add a value to a new List. After the Parallel for loop completes, I output the size of the list. The size should always be 1,000. Most of the time, the correct answer is given. However, I have seen 3 possible incorrect outcomes occur: The size of the list is less than 1,000 An IndexOutOfRangeException occurs @ doubleList.Add(0.0); An ArgumentException occurs @ doubleList.Add(0.0); The message for the ArgumentException given was: Destination array was not long enough. Check destIndex and length, and the array's lower bounds. What could be causing the errors? Is this a .Net bug? Is there something I can do to prevent this from happening? Please try the code for yourself. If you do not get an error, try it a few times. Please also note that you probably will not see any errors using a single-core machine. using System; using System.Collections.Generic; using System.Threading.Tasks; namespace ParallelTest { class Program { static void Main(string[] args) { List<int> intList = new List<int>(); List<double> doubleList = new List<double>(); for (int i = 0; i < 250; i++) { intList.Clear(); doubleList.Clear(); for (int j = 0; j < 10000; j++) { intList.Add(j % 10); } Parallel.For(0, intList.Count, j => { if (intList[j] == 0) { doubleList.Add(0.0); } }); if (doubleList.Count != 1000) { Console.WriteLine("On iteration " + i + ": List size = " + doubleList.Count); } } Console.WriteLine("\nPress any key to exit."); Console.ReadKey(); } } }

    Read the article

  • passing custom object as parameter to a webmethod of asp.net web service

    - by Jon
    Hi, I have a custom class declared as follows (in vb.net) <Serializable()> _ Public Class NumInfo Public n As String Public f As Integer Public fc As char() Public t As Integer Public tc As char() Private validFlag As Boolean = True Public Sub New() End Sub 'I also have public properties(read/write) for all the public variablesEnd Class In my service.asmx codebehind class I have a webmethod as follows: <WebMethod()> _ <XmlInclude(GetType(NumInfo))> _ Public Function ConvertTo(ByVal info As NumInfo) As String Return mbc(info)'mbc is another function defined in my service.asmx "service" class End Function The problem is that when I start debugging it to test it, the page that I get does not contain any fields where I could input the values for the public fields of numInfo. How do I initialise the class? There is no "Invoke" button either. All I see are soap details as below: ConvertToTestThe test form is only available for methods with primitive types as parameters.SOAP 1.1The following is a sample SOAP 1.1 request and response. The placeholders shown need to be replaced with actual values.POST /Converter/BC.asmx HTTP/1.1Host: localhostContent-Type: text/xml; charset=utf-8Content-Length: lengthSOAPAction: "http://Services/ConvertTo"<?xml version="1.0" encoding="utf-8"?> <soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"> <soap:Body> <ConvertTo xmlns="http://Services/"> <info> <n>string</n> <f>int&lt/f> <fc> <char>char</char> <char>char>/char> </fc>..etc.. What am I doing wrong? For the record I tried replacing char() with string to see if it was the array causing problems but that didn't help either. I'm fairly new to web services. I tried replacing the custom object parameter with a primitive parameter just to check how things worked and it rendered a page with an input field and invoke button. I just can't seem to get it working with custom object. Help!

    Read the article

< Previous Page | 455 456 457 458 459 460 461 462 463 464 465 466  | Next Page >