Search Results

Search found 15439 results on 618 pages for 'wls configuration'.

Page 459/618 | < Previous Page | 455 456 457 458 459 460 461 462 463 464 465 466  | Next Page >

• 1000baseT/Full Supported and Advertised but not working!

  - by user11973

  Hello, i'm using a AT3IONT-I motherboard with integrated card. If I ethtool it to 1000 full duplex it wont work! Here is sudo ethtool eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) Link detected: yes here is sudo lshw -C network: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: 03 serial: bc:ae:c5:8b:7d:33 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.021.00-NAPI duplex=full ip=192.168.0.2 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:42 ioport:e800(size=256) memory:f8fff000-f8ffffff memory:f8ff8000-f8ffbfff memory:fbff0000-fbffffff And lspci -nn: 00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge [10de:0a82] (rev b1) 00:00.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a88] (rev b1) 00:03.0 ISA bridge [0601]: nVidia Corporation MCP79 LPC Bridge [10de:0aad] (rev b3) 00:03.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0aa4] (rev b1) 00:03.2 SMBus [0c05]: nVidia Corporation MCP79 SMBus [10de:0aa2] (rev b1) 00:03.3 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a89] (rev b1) 00:03.5 Co-processor [0b40]: nVidia Corporation MCP79 Co-processor [10de:0aa3] (rev b1) 00:04.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa5] (rev b1) 00:04.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa6] (rev b1) 00:06.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa7] (rev b1) 00:06.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa9] (rev b1) 00:08.0 Audio device [0403]: nVidia Corporation MCP79 High Definition Audio [10de:0ac0] (rev b1) 00:09.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Bridge [10de:0aab] (rev b1) 00:0b.0 RAID bus controller [0104]: nVidia Corporation MCP79 RAID Controller [10de:0abc] (rev b1) 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac4] (rev b1) 00:10.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0aa0] (rev b1) 00:15.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac6] (rev b1) 03:00.0 VGA compatible controller [0300]: nVidia Corporation ION VGA [10de:087d] (rev b1) 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) If i use Code: sudo ethtool -s eth0 speed 1000 duplex full autoneg off then in ethtool speed is Unknown and it doesn't work; if I set it via pre-up it wont work either... Please help!! Thanks!

  Read the article

• Managing Regulated Content in WebCenter: USDM and Oracle Offer a New Part 11 Compliant Solution for Life Sciences

  - by Michael Snow

  Guest post today provided by Oracle partner, USDM  Regulated Content in WebCenterUSDM and Oracle offer a new Part 11 compliant solution for Life Sciences (White Paper) Life science customers now have the ability to take advantage of all of the benefits of Oracle’s WebCenter Content, a global leader in Enterprise Content Management.   For the past year, USDM has been developing best practice compliance solutions to meet regulated content management requirements for 21 CFR Part 11 in WebCenter Content. USDM has been an expert in ECM for life sciences since 1999 and in 2011, certified that WebCenter was a 21CFR Part 11 compliant content management platform (White Paper).  In addition, USDM has built Validation Accelerators Packs for WebCenter to enable life science organizations to quickly and cost effectively validate this world class solution.With the Part 11 certification, Oracle’s WebCenter now provides regulated life science organizations  the ability to manage REGULATORY content in WebCenter, as well as the ability to take advantage of ALL of the additional functionality of WebCenter, including  a complete, open, and integrated portfolio of portal, web experience management, content management and social networking technology.  Here are a few screen shot examples of Part 11 functionality included in the product: E-Sign, E-Sign Rendor, Meta Data History, Audit Trail Report, and Access Reporting. Gone are the days that life science companies have to spend millions of dollars a year to implement, maintain, and validate ECM systems that no longer meet the ever changing business and regulatory requirements.  Life science companies now have the ability to use WebCenter Content, an ECM system with a substantially lower cost of ownership and unsurpassed functionality.Oracle has been #1 in life sciences because of their ability to develop cost effective, easy-to-use, scalable solutions which help increase insight and efficiency to drive growth for their customers.  Adding a world class ECM solution to this product portfolio allows life science organizations the chance to get rid of costly ECM systems that no longer meet their needs and use WebCenter, part of the Oracle Fusion Technology stack, with their other leading enterprise applications.USDM provides:•    Expertise in Life Science ECM Business Processes•    Prebuilt Life Science Configuration in WebCenter •    Validation Accelerator Packs for WebCenterUSDM is very proud to support Oracle’s expanding commitment to Life Sciences…. For more information please contact:  [email protected] Oracle will be exhibiting at DIA 2012 in Philadelphia on June 25-27. Stop by our booth (#2825) to learn more about the advantages of a centralized ECM strategy and see the Oracle WebCenter Content solution, our 21 CFR Part 11 compliant content management platform.

  Read the article

• Application Integration Future &ndash; BizTalk Server &amp; Windows Azure (TechEd 2012)

  - by SURESH GIRIRAJAN

  I am really excited to see lot of new news around BizTalk in TechEd 2012. I was recently watching the session presented by Sriram and Rajesh on “Application Integration Futures: The Road Map and What's Next on Windows Azure”. It was great session and lot of interesting stuff about the feature updates for BizTalk and Azure integration. I have highlighted them below, definitely customers who haven’t started using Microsoft BizTalk ESB Toolkit should start using them which is going to be part of the core BizTalk product in future release, which is cool… BizTalk Server feature enhancements Manageability: ESB Tool Kit is going to be part of the core BizTalk product and Setup. Visualize BizTalk artifact dependencies in BizTalk administration console. HIS administration using configuration files. Performance: Improvements in ordered send port scenarios Improved performance in dynamic send ports and ESB, also to configure BizTalk host handler for dynamic send ports. Right now it runs under default host, which does not enable to scale. MLLP adapter enhancements and DB2 client transaction load balancing / client bulk insert. Platform Support: Visual Studio 2012, Windows 8 Server, SQL Server 2012, Office 15 and System Center 2012. B2B enhancements to support latest industry standards natively. Connectivity Improvements: Consume REST service directly in BizTalk SharePoint integration made easier. Improvements to SMTP adapter, to add macros for sending same email with different content to different parties. Connectivity to Azure Service Bus relay, queues and topics. DB2 client connectivity to SQL Server and SQL Server connectivity to Informix. CICS Http client connectivity to Windows. Azure: Use Azure as IaaS/PaaS for BizTalk environment. Use Azure to provision BizTalk environment for test environment / development. Later move to On-premises or build a Hybrid cloud approach. Eliminate HW procurement for BizTalk environment for testing / demos / development etc. Enable to create BizTalk farm easily and remove/add more servers as needed. EAI Service: EAI Bridge Protocol transformation Message Transformation Running custom code Message Enrichment Hybrid Connectivity LOB Applications On-premises Application On-premises Connectivity to Applications in the cloud Queues/ Topics Ftp Devices Web Services Bridge can be customized based on the service needs to provide different capabilities needed as part of the bridge. Look at the sample for EDI bridge for EDI service sample. Also with Tracking enabled through the portal. http://msdn.microsoft.com/en-us/library/windowsazure/hh674490 Adapters: Service Bus Messaging adapter - New adapter added. WebHttp adapter - For REST services. NetTcpRelay adapter - New adapter added. I will start posting more and once I start playing with this…

  Read the article

• Java EE 8 update

  - by delabassee

  Planning for Java EE 8 is now well underway. As you know, a few weeks ago, we conducted a three part Java EE 8 Community Survey (you can find the final summary here). The data gathered have been very influential for the next steps. You can now expect over the coming weeks and months to see updates on the various specifications that compose the Java EE platform. Some Specification Leads are busy gathering additional feedback regarding what they should focus their efforts on (e.g. CDI 2 survey). Other Specification Leads have already publicly exposed what they think should be one of the focus for the evolution of the specification they lead.  For example, adding Server-Senet Events (SSE) support in JAX-RS is being discussed here and adding MVC support is being discussed here. Please remember that the fact we are now discussing any feature does not insure that it will be included in the proposal, nor in any particular update to Java EE. We can expect additional enhancements, changes and evolutions as we get closer to the finalisation of the different specifications... and there is still a long way to go with these specification proposals! Linda DeMichiel, Java EE Co-Specification Lead, has recently posted a draft proposal for the Java EE 8 Platform specification. Linda's goal is to recruit people and companies supporting this proposal before submitting it to the JCP.  This draft proposal is very interesting reading as it contains relevant information on the plans for Java EE 8 such as : The themes: Support for the latest web standards (eg. HTTP 2.0)  Continue to work on ease of development Improve the infrastructure for cloud support Alignment with Java SE 8 New JSRs to be added to the platform: J-Cache Java API for JSON Binding Java Configuration Plans for the Web Profile Plans on technologies to prune in Java EE 8, ... So if you haven't done it yet, I really encourage you to read the Java EE 8 draft proposal! Our goal for the Java EE 8 specification is for it to be finalized in the second half of 2016. It is important to note that we are in the early days of Java EE 8 and at this stage everything (themes, content, timing, etc.) is preliminary. Everything still needs to be discussed, challenged and agreed within the different Java Community Process (JCP) Experts Groups (EGs). Some EGs that still need to be formed! It could also means that the roadmap will have to be adjusted to follow the progress being made in the different EGs. This is also a good occasion to remind you that participation within those upcoming JCP Experts Groups is encouraged. Contributing in an EG is an effective lever to influence what Java EE 8 will become! Finally, as things get more concrete, we will share details on how to engage in the different Java EE 8 related Adopt-a-JSR initiatives, another way to contribute. You can also read other posts related to Java EE 8, here at The Aquarium blog. Just look for articles with the 'javaee8' tag.

  Read the article

• EBS – ATG Webcast 9/11 - 9/12

  - by cwarticki

  EBS – ATG Webcast in September 2012 EBS – Multiple Language Support (MLS) Agenda :EBS is MLS Ready                                                                                 NLS / MLS Basic ArchitectureNLS / MLS InstallationNLS / MLS Configuration Settings                                                                    TroubleshootingQuestion and AnswersEMEA Session : September 11, 2012 at 09:00 UK / 10:00 CET / 13:30 India / 17:00 Japan / 18:00 Sydney (Australia) Details & Registration : Note 1480084.1 Direct link to register in WebEx US Session : September 12, 2012 at 18:00 UK / 19:00 CET / 10:00 AM Pacific / 11:00 AM Mountain/ 01:00 PM Eastern ·      Details & Registration : Note 1480085.1 ·      Direct link to register in WebEx ·         Schedules, recordings and the Presentations of the Advisor Webcast drove under the EBS Applications Technology area can be found in Note 1186338.1. ·         Current Schedules of Advisor Webcast for all Oracle Products can be found on Note 740966.1 ·         Post Presentation Recordings of the Advisor Webcasts for all Oracle Products can be found on Note 740964.1 If you have any question about the schedules or if you have a suggestion for an Advisor Webcast to be planned in future, please send an E-Mail to Ruediger Ziegler.

  Read the article

• Small hiccup with VMware Player after upgrading to Ubuntu 12.04

  The upgrade process Finally, it was time to upgrade to a new LTS version of Ubuntu - 12.04 aka Precise Pangolin. I scheduled the weekend for this task and despite the nickname of Mauritius (Cyber Island) it took roughly 6 hours to download nearly 2.400 packages. No problem in general, as I have spare machines to work on, and it was weekend anyway. All went very smooth and only a few packages required manual attention due to local modifications in the configuration. With the new kernel 3.2.0-24 it was necessary to reboot the system and compared to the last upgrade, I got my graphical login as expected. Compilation of VMware Player 4.x fails A quick test on the installed applications, Firefox, Thunderbird, Chromium, Skype, CrossOver, etc. reveils that everything is fine in general. Firing up VMware Player displays the known kernel mod dialog that requires to compile the modules for the newly booted kernel. Usually, this isn't a big issue but this time I was confronted with the situation that vmnet didn't compile as expected ("Failed to compile module vmnet"). Luckily, this issue is already well-known, even though with "Failed to compile module vmmon" as general reason but nevertheless it was very easy and quick to find the solution to this problem. In VMware Communities there are several forum threads related to this topic and VMware provides the necessary patch file for Workstation 8.0.2 and Player 4.0.2. In case that you are still on Workstation 7.x or Player 3.x there is another patch file available. After download extract the file like so: tar -xzvf vmware802fixlinux320.tar.gz and run the patch script as super-user: sudo ./patch-modules_3.2.0.sh This will alter the existing installation and source files of VMware Player on your machine. As last step, which isn't described in many other resources, you have to restart the vmware service, or for the heart-fainted, just reboot your system: sudo service vmware restart This will load the newly created kernel modules into your userspace, and after that VMware Player will start as usual. Summary Upgrading any derivate of Ubuntu, in my case Xubuntu, is quick and easy done but it might hold some surprises from time to time. Nonetheless, it is absolutely worthy to go for it. Currently, this patch for VMware is the only obstacle I had to face so far and my system feels and looks better than before. Happy upgrade! Resources I used the following links based on Google search results: http://communities.vmware.com/message/1902218#1902218http://weltall.heliohost.org/wordpress/2012/01/26/vmware-workstation-8-0-2-player-4-0-2-fix-for-linux-kernel-3-2-and-3-3/ Update on VMware Player 4.0.3 Please continue to read on my follow-up article in case that you upgraded either VMware Workstation 8.0.3 or VMware Player 4.0.3.

  Read the article

• Unity Dash and top toolbar won't open after updating to 12.10

  - by pgrytdal

  Today, I updated to Ubuntu 12.10. After re-starting, like the updater suggested, the toolbar on the top of the screen, and the dash won't load. I seem to be missing other features, as well, like alttab to switch windows, etc. I am able to access the Terminal, by typing CtrlAltT, which is how I was bale to access Firefox. How do I fix this problem? Edit: 2:10 PM on 10/19/12 As Chris Carter suggested, I'm including the results of the teminal command lspci (Sorry... I dont know how to format between Back-tics): 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Acer Incorporated [ALI] AMD RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3a) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] 01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] 03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) 09:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)

  Read the article

• Enterprise Manager 12c: New DSS Demos Available

  - by Javier Puerta

  Enterprise Manager Cloud Control 12c Application Replay Demo Now Available! User Experience Monitoring with Enterprise Manager Cloud Control 12c and Real User Experience Insight 12R1 Now Available! Oracle Enterprise Manager Cloud Control 12c: Database Management Packs demo upgrade     Enterprise Manager Cloud Control 12c Application Replay Demo Now Available! We are pleased to announce the availability of the Oracle Application Replay demo that showcases some of the key capabilities of performing realistic, production scale testing of your web and packaged Oracle applications. This demo specifically focuses on capturing production web traffic from an E-Business Suite application and replaying the captured workload on a test E-Business Suite application to assess the impact of an application infrastructure change on the workload. The target audiences are application developers, quality assurance teams, IT managers and production control staff that deal in day-to-day change management activities and trouble shooting of production environments. Demo Highlights: Enterprise Manager 12c workflows for capturing application workload Seamless integration of Application Replay with Real User Experience Insight for application workload capture Enterprise Manager 12c centralized workflows for replaying captured application workloads in a test environment Demonstrates how to minimize risk when deploying a complex EBusiness Suite application infrastructure change. Rich reporting capability for performance analysis and problem detection User Experience Monitoring with Enterprise Manager Cloud Control 12c and Real User Experience Insight 12R1 Now Available! We are pleased to announce the availability of the Oracle Real User Experience Insight demo that showcases some of the key capabilities of user experience monitoring. This demo specifically focuses on business reporting, integrated performance diagnostics, tracking of customer journey’s through RUEI’s userflow tracking capabilities and it’s Key Performance Indicators tracking and configuration. Demo Highlights: Application-centric dashboard Integration with Oracle Enterprise Manager 12c – JVMD, ADP and BTM Session diagnostics and user session replay Monitoring through “Key Performance Indicators” (KPI) --- create alerts/incidents FUSION Application centric dashboards & integrated BI Oracle Enterprise Manager Cloud Control 12c: Database Management Packs demo upgrade DSS is pleased to announce an upgrade to the Oracle Enterprise Manager Cloud Control 12c: Database Management Packs demo. While retaining the content from the initial release of the demo—Diagnostic and Tuning Packs, Test Data Management and Data Masking, and Real Application Testing—the demo now includes a new Data Masking for Real Application Testing scenario. Demo Features: Diagnostic and Tuning Packs SQL Performance Analyzer Database Replay Data Masking Masking Real Application Testing workloads Testing pending Optimizer statistics Test Data Management

  Read the article

• Nvidia GT218 repository drivers don't work

  - by user1042840

  I upgraded all packages with sudo apt-get upgrade command on my Ubuntu 10.04 box and I have Ubuntu 12.04 3.2.0-29-generic-pae now. I have two monitors and the following GPU: 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [NVS 300] (rev a2) After upgrading to 12.04, I somehow lost my previous setup with one common workspace stretched across two monitors. When Ubuntu starts only one monitor is on. I can see the message on the active monitor: Not optimum mode. Recommended mode: 1680x1050 60Hz I used Nvidia proprietary drivers on 10.04 but now jockey-text --list shows: xorg:nvidia_current - NVIDIA accelerated graphics driver (Proprietary, Disabled, Not in use) xorg:nvidia_current_updates - NVIDIA accelerated graphics driver (post-release updates) (Proprietary, Enabled, Not in use) When I run sudo nvidia-settings it says You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.' I typed nvidia-xconfig and rebooted, but jockey-text --list says the same after the reboot: Not in use. The same with nvidia-current - Enabled but Not in use. I also tried nvidia-173 but I ended up in tty immediately at startup so I removed it. I used to have some problems with Nvidia proprietary drivers on 10.04, I had to put paths to EDID files in /etc/X11/xorg.conf explicitly, but the resolution was as recommended and both monitors were working. If I understand correctly, nouveau drivers are used now by default because the resolution is still quite high, definitely not 800x600, xrandr showed: xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 400, current 1600 x 1200, maximum 1600 x 1200 default connected 1600x1200+0+0 0mm x 0mm 1600x1200 66.0* 1280x1024 76.0 1024x768 76.0 800x600 73.0 640x480 73.0 640x400 0.0 320x400 0.0 1680x1050_60.00 (0x4f) 146.2MHz h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.3KHz v: height 1050 start 1053 end 1059 total 1089 clock 60.0Hz However, colors seem a bit faded and blurry with nouveau drivers. Mouse cursor is invisible if it's placed inside Firefox window, and only one monitor is working. I like open source and if it's possible I'd prefer to use nouveau drivers but a few things should be fixed. I'm curious why nvidia-current drivers from the repository don't work now. I read it has something to do with the new X11 server in Ubuntu 12.04, is it true? How can I get it back to work?

  Read the article

• Microsoft Azure News: Capturing VM Images

  - by Herve Roggero

  Originally posted on: http://geekswithblogs.net/hroggero/archive/2014/05/21/microsoft-azure-news-capturing-vm-images.aspxIf you have a Virtual Machine (VM) in Microsoft Azure that has a specific configuration, it used to be difficult to clone that VM. You had to sysprep the VM, and clone the data disks. This was slow, prone to errors, and stopped you from being productive. No more! A new option, called Capture, allows you to easily select a VM, running or not. The capture will copy the OS disk and data disks and create a new image out of it automatically for you. This means you can now easily clone an entire VM without affecting productivity.  To capture a VM, simply browse to your Virtual Machines in the Microsoft Azure management website, select the VM you want to clone, and click on the Capture button at the bottom. A window will come up asking to name your image. It took less than 1 minute for me to build a clone of my server. And because it is stored as an image, I can easily create a new VM with it. So that’s what I did… And that took about 5 minutes total.  That’s amazing…  To create a new VM from your image, click on the NEW icon (bottom left), select Compute/Virtual Machine/From Gallery, and select My Images from the left menu when selecting an Image. You will find your newly created image. Because this is a clone, you will not be prompted for a new login; the user id/password is the same. About Herve Roggero Herve Roggero, Microsoft Azure MVP, @hroggero, is the founder of Blue Syntax Consulting (http://www.bluesyntaxconsulting.com). Herve's experience includes software development, architecture, database administration and senior management with both global corporations and startup companies. Herve holds multiple certifications, including an MCDBA, MCSE, MCSD. He also holds a Master's degree in Business Administration from Indiana University. Herve is the co-author of "PRO SQL Azure" and “PRO SQL Server 2012 Practices” from Apress, a PluralSight author, and runs the Azure Florida Association.

  Read the article

• Dynamic Bind9 + DHCP

  - by AcidRod75

  i have been working on setup a server for my internal network, so far i have a working isc-dhcp-server that can upgrade a chrooted BIND9 (on the same machine), i need to add some static entries on the DNS, so users can resolve the websites that resides in our DMZ. What i had tryed all ready was to modify the /etc/bind/named.conf.local with this info: // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; key DHCP_UPDATER { algorithm HMAC-MD5.SIG-ALG.REG.INT; secret "MySuperSecretHash"; (this is not the real value BTW) }; zone "quality.internal" IN { type master; file "/var/lib/bind/quality.internal.db"; allow-update { key DHCP_UPDATER; }; }; zone "0.10.10.in-addr.arpa" { type master; file "/var/lib/bind/rev.10.10.0.in-addr.arpa"; allow-update { key DHCP_UPDATER; }; }; logging { channel query.log { file "/var/log/named/query.log"; severity debug 3; }; category queries { query.log; }; }; --- EOF ---- then i added this 2 entries: zone "ourserver.internal" IN { type master; file "/var/lib/bind/ourserver.internal.db"; }; zone "0.16.172.in-addr.arpa" { type master; file "/var/lib/bind/rev.172.16.0.in-addr.arpa"; }; ---- EOF ---- So.. i created the files ourserver.internal.db and rev.172.16.0.in-addr.arpa placed them BOTH in /var/lib/bind/ and changed the permisions so the bind user can access them, restated the service... when i do a NSLOOKUP www.ourserver.internal i get: Server: 127.0.0.1 Address: 127.0.0.1#53 ** server can't find www.ourserver.internal: NXDOMAIN BUT when i do a reverse lookup.... Server: 127.0.0.1 Address: 127.0.0.1#53 5.0.16.172.in-addr.arpa name = www.ourserver.internal I do not understand what's wrong. Some help with this will save me from installing a new DNS server at the DMZ JUST to host internal site names- TY in advance BTW: the server i'm using has Ubuntu Server 11.10 fully patched.

  Read the article

• Got Samba, Got PyNeighbourhood but still no connection. What else do I need?

  - by Frank A

  I am sure I had already hit post before but then could only find it by backing through browser. Was it deleted? is the question too dumb, sorry that I do not know the right jargon just trying to get answers to my problem anyway have reworded stuff a bit This seems to be a number one requirement for lots of people and 2 months on from setting up my Ubuntu pc, I am still unable to get a lasting connection in either direction. Adding a windows pc to a network is so easy... just a few clicks and get on with using it all. Using all command approaches and modifying configuration files is hardly user friendly. Googling brings up thousands of solutions but mostly they are too techy or assume the user is fully aware of how to use Linux. I do realise that their must be a lot of flavours for connecting to networks. So far I have installed Samba and fiddled with its config file. The day I did all that it worked from XP to Ubuntu. When I came back two days later to transfer my data over it would not connect. Although the the share does show up in Windows (XP) My Network Places. Today I installed PyNeighbourhood and this shows the Ubuntu box and all of the shares I had created at some point on Ubuntu and it even shows this under the XP workgroup name. But instructions on setting the connection up seem to relate to an earlier version and nothing seems to work there either. (I unshared most of those test folders but they still show up her but that is another question. When I click on mount- I can only click on one on the Ubuntu machine, there is one with no name so I assume this to be my attempt to add one XP Shared drive using ipaddress, I get errors. (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) OK tried to find the manual referred to... only an old comment that manual would be produced for future versions. I saw in another thread that Winbind is needed as well or at least I assume as well? Totally lost again? Please help, what else needs to be installed to connect to win pcs on the network.

  Read the article

• Can working exclusively with niche apps or tech hurt your career in software development? How to get out of the cycle? [closed]

  - by Keoma

  I'm finding myself in a bit of a pickle. I've been at a pretty comfortable IT group for almost a decade. I got my start here working on web development, mostly CRUD, but have demonstrated the ability to figure out more complex problems. I'm not a rock star, but I have received many compliments on my programming aptitude, and technologists and architects have commented on my ability to pick things up (for example, I recently learned a very popular web framework that shall remain nameless since I don’t want to be identified). My problem is that, over time, my responsibilities have been shifting towards work such as support or ‘development’ with some rather niche products (afraid to mention here due to potential for being identified). Some of this work, if it includes anything resembling coding, is very menial scripting in languages such as Powershell or VBScript. The vast majority of the time, however, a typical day consists of going back and forth with the product’s vendor support to send them logs and apply configuration changes or patches they recommend. I’m basically starved for some actual software development. However, even though I’m more than capable of doing that development work (and actually do a much better job at it than anything else), our boss is more interested in the kind of work I mentioned above, her reasoning being that since no one else in the organization wants to do it, it must mean job security. This has been going on for close to 3 years, and the only reason I have held on is on the promise that we would eventually get more development projects assigned to us. Well, that turned out not to be true at all. A recent talk with the boss has just made it more explicitly clear, as she told me in no uncertain terms that it’s very likely that development work (web or otherwise) would go to another group. The reason given to me is that our we don’t have enough resources in our group to handle that. So now I find myself in the position that I either have to stay in what has essentially become a dead end IT job that is tied to the fortunes of a niche stack of apps, or try to find a position that will be better for my long term career. My problem (is it a problem?), however, is that compared to others, my development projects in the last three years are very sparse in number. To compound things, projects using the latest and most popular frameworks, amount to the big fat number of just one—with no work of that kind in the foreseeable future. I am very concerned that this sparseness in my resume is a deficit, and that it will hurt my chances of landing a different job. I’m also wondering how much it will hurt me, and whether that can be ameliorated with hobby projects of my own. I guess I’m looking for opinions. Thank you very much for reading.

  Read the article

• Do you know about the Visual Studio 2010 Database Projects Guidance?

  - by Martin Hinshelwood

  Early on in the Team System (now Visual Studio ALM) cycle a new product surfaced within Team System that was affectionately called “Data Dude”, but had the more formal name of “Visual Studio 2005 Team Edition for Database Professionals”. The purpose of this product was to try and make the database a “first class citizen” in the development world. Those that started using Visual Studio 2005 Team Edition for Database Professionals (Data Dude) loved it, but everyone else did not get it. The capabilities were a little patchy, but the one thing it did bring to the party was the ability to put your database schema under source control. This was revolutionary as previously your DBA sat as far away from the team as possible, and usually in a dark cupboard, now they could partake of all the goodness of Version Control, Work Item Tracking and automated builds. The problem was that the understanding required to manage these projects was very different to that needed previously. Then the Visual Studio ALM Rangers got a hold of it…and produced some of the best guidance available. Figure: Download the guidance from http://vsdatabaseguide.codeplex.com/ This guidance discusses scenarios and approaches of using the Database Projects in Visual Studio 2010 to help you use the tools more effectively and maximize their value to your organization This guidance is focused on these five areas: Solution and Project Management Source Code Control and Configuration Management Integrating External Changes with the Project System Build and Deployment Automation with Visual Studio Database Projects Database Testing and Deployment Verification Each of these areas has common guidance, usage scenarios, hands on labs, and lessons learned from real world engagements and the community discussions.   The guidance is broken down into three packages: Guidance documentation Hands-on-lab (HOL) documentation note: The documentation is available in XPS-only format packages or complete XPS,PDF,DOCX format packages HOL Package If you need assistance and no one else can help, then you may need to call the Visual Studio ALM Rangers. The Visual Studio ALM Rangers have the mission to provide out of band solutions for missing features or guidance. They are supported by Microsoft Product Group, Microsoft Consulting Services, Microsoft Most Valued Professionals (MVPs) and technical specialists from technology communities around the globe, giving you a real-world view from the field, where the technology has been tested and used. For more information on the Rangers please visit http://msdn.microsoft.com/en-us/vstudio/ee358786.aspx and for more a list of other Rangers projects please see http://msdn.microsoft.com/en-us/vstudio/ee358787.aspx.

  Read the article

• How are you coping with Ubuntu's Unity app launcher? (It auto-hides, can't minimize apps)

  - by Bad Learner

  [Firstly, let me tell you that this cannot be subjective in anyway, as I think at least Ubuntu beginners will have these questions boggling in their mind; and yes, this is a question that has a definite answer - - so, I am completely within the rules.] Okay, coming to the point, I see that Ubuntu uses Unity since v10.xx (netbook edition?) and carried the same to v11.04 & v11.10. As someone who's stuck to Windows for all these years, it's somewhat difficult to cope with Ubuntu's Unity, for the following reasons: [1] The Unity app launcher (to the screen's left) auto-hides when a window is maximized. [2]- And once launched, apps cannot be minimized by clicking the app's icon in the launcher. I have to go to the top-left of the screen and click the "_" button. I do know I can fix these issues by installing some configuration tool. But the thing is, if that's how it's meant to work, Canonical/Ubuntu would have designed it that way. But they didn't. Why? w.r.t above points [1], [2]: [1] EDITED: So, does it mean, it's good to work without maximizing the windows? Because if I maximize the window, the app launcher hides. And I need to hover the mouse to the left of the screen, wait a bit (even if it's a sec or even less, I can still feel the lag), and then click on the next app icon in the launcher to switch to it. I do know, I can use Alt+TAB to switch, but I am not sure which window comes next. This, I feel, isn't productive. Also, this makes me feel, Ubuntu is designed for large screens (it's nice on my 1920x1080p screen), because I can have two windows side-by-side or something like that on a large screen. This is not possible on smaller screens. [2]- Being able to minimize an application's window by clicking on its icon in the launcher (just like it works on Windows & probably elsewhere) would have been great, rather than having to go to the top-left and clicking the _ (minimize) button which brings up the app launcher itself (from hiding) most of the time. It's too tiring to have these small issues in the UI. I really would like to know how you are coping with these issues the way they are?

  Read the article

• No suspend on lid closing on a Samsung Series 5 14" NP530U4BI

  - by dmeu

  Ok, i realize I am not the only one, but I will try to provide all info possible to make it exemplary as possible and narrow down the error sources. I have a fresh install of Ubuntu 12.04 and the suspend worked fine upon having it freshly installed but now it does not anymore. The suspend option from the system power button on the top right works fine. Things I did do which I don't know if they are related: Install and remove againthe FGLRX drivers (Radeon graphic card) Install Jupiter power managment (shutting it down is not changin anything) Plug in and out an external display The configuration I know of is well set: In System Settings/Power all is set to suspend when closing lid Double checked with dconf-editor, everything set to suspend So, from here on I don't know how to proceed.. what are common problems that cause this error? EDIT: My computer model is: Samsung Series 5 14" NP530U4BI $ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] 02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6230 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller 04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller

  Read the article

• Small script to look for Project Replication actions that have failed

  - by Trond Strømme

  Today when looking at a couple of projects on a ZFS 7320 Storage Appliance I noticed on one project that one of its replication actions had failed, as I hadn't checked the Recent Alerts log yet I was not aware of this. I decided to write a small script to check if there were others that had failed. Nothing fancy, just a loop through all projects, look at the project's replication child and compare the values of the last_sync and last_try properties and print the result if they're not equal. (There are probably more sensible ways of doing this, but at least it involves me getting the chance to put on my headphones and doing just a little bit of coding.) script // this script will locate failed project level replication // it will look at the sync times for 'last_sync' and 'last_try' // and compare these, if they deviate you should investigate. // NOTE! this code is offered 'as is' Run at your own risk, // it will probably work as intended, but in now way can I // (or Oracle) be held responsible if your server starts behaving // like a three year old kid in a candy store.. (not that mine do, // they are very well behaved boys...) run('configuration'); run('storage'); printf('Host: %s, pool: %s\n', get('owner'),get('pool')); run('cd /'); run('shares'); proj=list(); printf("total projects: %d\n",proj.length +'\n'); // just for project level replication for(i=0;i<proj.length;i++){ run('select '+proj[i]); run('replication'); //get all replication actions preps = list(); for(j=0;j<preps.length;j++){ run('select ' + preps[j]); last_sync = get('last_sync'); last_try = get('last_try'); // printf("target %s\n", get('target')); //why the flip does this not get the proper name? if(!( last_sync.valueOf() === last_try.valueOf())){ printf("sync has failed for %s %s\n", proj[i], get('target')); }else{ // printf("OK %s %s\n", proj[i], get('target')); } run('done'); //done with the replica action } run('done'); run('done'); } printf("finished\n"); For a more on how to run the script, or testing it please look at my previous post. Sample output: Host: elb1sn01, pool: exalogic total projects: 45 sync has failed for ACSExalogicSystem cb3a24fe-ad60-c90f-d15d-adaafd595639 finished

  Read the article

• Resources to Help You Getting Up To Speed on ADF Mobile

  - by Joe Huang

  Hi, everyone: By now, I hope you would have a chance to review the sample applications and try to deploy it.  This is a great way to get started on learning ADF Mobile.  To help you getting started, here is a central list of "steps to get up to speed on ADF Mobile" and related resources that can help you developing your mobile application. Check out the ADF Mobile Landing Page on the Oracle Technology Network. View this introductory video. Read this Data Sheet and FAQ on ADF Mobile. JDeveloper 11.1.2.3 Download. Download the generic version of JDeveloper for installation on Mac. Note that there are workarounds required to install JDeveloper on a Mac. Download ADF Mobile Extension from JDeveloper Update Center or Here. Please note you will need to configure JDeveloper for Internet access (In HTTP Proxy preferences) in order the install the extension, as the installation process will prompt you for a license that's linked off Oracle's web site. View this end-to-end application creation video. View this end-to-end iOS deployment video if you are developing for iOS devices. Configure your development environment, including location of the SDK, etc in JDeveloper-Tools-Preferences-ADF Mobile dialog box.  The two videos above should cover some of these configuration steps. Check out the sample applications shipped with JDeveloper, and then deploy them to simulator/devices using the steps outlined in the video above.  This blog entry outlines all sample applications shipped with JDeveloper. Develop a simple mobile application by following this tutorial. Try out the Oracle Open World 2012 Hands on Lab to get a sense of how to programmatically access server data.  You will need these source files. Ask questions in the ADF/JDeveloper Forum. Search ADF Mobile Preview Forum for entries from ADF Mobile Beta Testing participants. For all other questions, check out this exhaustive and detailed ADF Mobile Developer Guide. If something does not seem right, check out the ADF Mobile Release Note. Thanks, Oracle ADF Mobile Product Management Team

  Read the article

• Still prompted for a password after adding SSH public key to a server

  - by Nathan Arthur

  I'm attempting to setup a git repository on my Dreamhost web server by following the "Setup: For the Impatient" instructions here. I'm having difficulty setting up public key access to the server. After successfully creating my public key, I ran the following command: cat ~/.ssh/[MY KEY].pub | ssh [USER]@[MACHINE] "mkdir ~/.ssh; cat >> ~/.ssh/authorized_keys" ...replacing the appropriate placeholders with the correct values. Everything seemed to go through fine. The server asked for my password, and, as far as I can tell, executed the command. There is indeed a ~/.ssh/authorized_keys file on the server. The problem: When I try to SSH into the server, it still asks for my password. My understanding is that it shouldn't be asking for my password anymore. What am I missing? EDIT: SSH -v Log: Macbook:~ michaeleckert$ ssh -v [USER]@[SERVER URL] OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 53: Applying options for * debug1: Connecting to [SERVER URL] [[SERVER IP]] port 22. debug1: Connection established. debug1: identity file /Users/michaeleckert/.ssh/id_rsa type -1 debug1: identity file /Users/michaeleckert/.ssh/id_rsa-cert type -1 debug1: identity file /Users/michaeleckert/.ssh/id_dsa type -1 debug1: identity file /Users/michaeleckert/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.5p1 Debian-6+squeeze3 debug1: match: OpenSSH_5.5p1 Debian-6+squeeze3 pat OpenSSH_5* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA [STRING OF NUMBERS AND LETTERS SEPARATED BY SEMI-COLONS] debug1: Host ‘[SERVER URL]' is known and matches the RSA host key. debug1: Found key in /Users/michaeleckert/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/michaeleckert/.ssh/id_rsa debug1: Trying private key: /Users/michaeleckert/.ssh/id_dsa debug1: Next authentication method: password [USER]@[SERVER URL]'s password: debug1: Authentication succeeded (password). Authenticated to [SERVER URL] ([[SERVER IP]]:22). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = en_US.UTF-8 Welcome to [SERVER URL] Any malicious and/or unauthorized activity is strictly forbidden. All activity may be logged by DreamHost Web Hosting. Last login: Sun Nov 3 12:04:21 2013 from [MY IP] [[SERVER NAME]]$

  Read the article

• I need help installing Ubuntu 11.10 to multi-drive system

  - by CookyMonzta

  I have a machine with 3 hard drives; the primary, which is 750GB (drive 0), and 2 others, each of which is 640GB (drives 1 and 2). On the last screen before the actual installation begins, this is how my hard drive configuration looks: /dev/sda [DISK0, 750GB] /dev/sda1 ntfs 104MB [Win7 System Reserved] /dev/sda2 ntfs 499,997MB [Windows 7 Pro] free space 250,052MB [This space intended for Windows 8] /dev/sdb [DISK1, 640GB] /dev/sdb1 ntfs 400,085MB [Windows XP Pro] free space 240,049MB [This space intended for Ubuntu] /dev/sdc [DISK2, 640GB] [This drive intended for various backups] free space 160,033MB /dev/sdc5 ntfs 480,101MB [Acronis Secure Zone] As you can see, I have 3 drives, all SATA. I have Win7 on my first drive (0), WinXP on my second drive (1) and a secure zone for daily backups on my third drive (2). I want to put Ubuntu 11.10 Oneiric Ocelot on the drive that also has XP. I've already used 400GB for XP and I have 240GB remaining, for which, my intention was to create a 4GB swap file and use the rest for Ubuntu itself. This is what my second hard drive looked like, for my intended setup before installation: /dev/sdb /dev/sdb5 swap 4,095MB [Linux swap] /dev/sdb6 ext4 235,951MB [Ubuntu 11.10] Needless to say, this is only the second time I have attempted to install Linux. I managed to get 7.10 Gutsy Gibbon working on an old machine. I have two problems with this installation: Ubuntu asks for a location to install the boot loader (i.e., "Device for Boot Loader Installation"). I already have a boot loader; namely, Acronis OS Selector (from Acronis Disk Director 11). So I decided to put the Ubuntu boot loader in /dev/sdb6 (where I intend to install Ubuntu), to keep it from interfering with my Acronis OS Selector. Once I hit "Install now", I ended up with the following error: "No root file system is defined. Please correct this from the partitioning menu." What am I missing? Did I attempt to put the boot loader in the wrong place? I assume I did, because as I am writing this entry, I am looking at LinuxIdentity.com's Ubuntu 11.04 Natty Narwhal magazine, and I see a screenshot (Figure 7 on Page 13) that implies that the boot loader can be installed anywhere, including the first hard drive (in the MBR, which would obviously force me to reinstall the Acronis OS Selector) or even on a floppy. But why do I get an undefined root file system error? I thought /dev/sdb6 was the root file. Obviously I'm missing something in the installation procedure. Should I try installing it in Windows using the WUBI Installer? I assume that, if I attempt to install Ubuntu from WinXP (on the second drive), it will automatically install Ubuntu on the empty partition alongside XP. But will I have the option of creating a swap partition? And what if the WUBI Installer searches all of my drives and decides to install Ubuntu on my first drive's empty partition (which I have left empty for Win8 upon its release)?

  Read the article

• Once installed geos library (C++, and C), and then trying to install rgeos package (R), it reports geos-config missing!

  - by user1873888

  Knowing that the package rgeos, from the R language, requieres a prior installation of geos libraries, I installed, both, libgeos and libgeos-c1 (3.2.2), using the synaptic installer in my Ubuntu 12.04 (32 bit) machine. Then I tried to install rgeos directly from the R console, and it issued a message in the sense that geos-config was not found. The output is as follows: > install.packages("rgeos") Installing package(s) into ‘/home/checo/R/i486-pc-linux-gnu-library/2.15’ (as ‘lib’ is unspecified) also installing the dependency ‘sp’ probando la URL 'http://cran.rstudio.com/src/contrib/sp_1.0-9.tar.gz' Content type 'application/x-gzip' length 882102 bytes (861 Kb) URL abierta ================================================== downloaded 861 Kb probando la URL 'http://cran.rstudio.com/src/contrib/rgeos_0.2-19.tar.gz' Content type 'application/x-gzip' length 221471 bytes (216 Kb) URL abierta ================================================== downloaded 216 Kb * installing *source* package ‘sp’ ... ** package ‘sp’ successfully unpacked and MD5 sums checked ** libs gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c R centroid.c -o Rcentroid.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c gcdist.c -o gcdist.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c init.c -o init.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c pip.c -o pip.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c pip2.c -o pip2.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c sp_xports.c -o sp_xports.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c surfaceArea.c -o surfaceArea.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c zerodist.c -o zerodist.o gcc -std=gnu99 -shared -o sp.so Rcentroid.o gcdist.o init.o pip.o pip2.o sp_xports.o surfaceArea.o zerodist.o -L/usr/lib/R/lib -lR installing to /home/checo/R/i486-pc-linux-gnu-library/2.15/sp/libs ** R ** data ** demo ** inst ** preparing package for lazy loading ** help *** installing help indices ** building package indices ** installing vignettes ‘intro_sp.Rnw’ ‘over.Rnw’ ** testing if installed package can be loaded * DONE (sp) * installing *source* package ‘rgeos’ ... ** package ‘rgeos’ successfully unpacked and MD5 sums checked configure: CC: gcc -std=gnu99 configure: CXX: g++ configure: rgeos: 0.2-17 checking for /usr/bin/svnversion... no configure: svn revision: 394 checking geos-config usability... ./configure: line 1385: geos-config: command not found no configure: error: geos-config not usable ERROR: configuration failed for package ‘rgeos’ * removing ‘/home/checo/R/i486-pc-linux-gnu-library/2.15/rgeos’ Warning in install.packages : installation of package ‘rgeos’ had non-zero exit status Forgive my ignorance, but I don't know where this file, "geos-config", comes from: should it be generated by the gcc compilations above, or should it be previously installed when the libgeos libraries were intalled? I learnt, from another machine, that "geos-config" is an executable and that it should be installed in /usr/bin. Do you have any idea on what's wrong with my procedure? Thanks, -Sergio.

  Read the article

• What causes Multi-Page allocations?

  - by SQLOS Team

  Writing about changes in the Denali Memory Manager In his last post Rusi mentioned: " In previous SQL versions only the 8k allocations were limited by the ‘max server memory’ configuration option.  Allocations larger than 8k weren’t constrained." In SQL Server versions before Denali single page allocations and multi-Page allocations are handled by different components, the Single Page Allocator (which is responsible for Buffer Pool allocations and governed by 'max server memory') and the Multi-Page allocator (MPA) which handles allocations of greater than an 8K page. If there are many multi-page allocations this can affect how much memory needs to be reserved outside 'max server memory' which may in turn involve setting the -g memory_to_reserve startup parameter. We'll follow up with more generic articles on the new Memory Manager structure, but in this post I want to clarify what might cause these larger allocations. So what kinds of query result in MPA activity? I was asked this question the other day after delivering an MCM webcast on Memory Manager changes in Denali. After asking around our Dev team I was connected to one of our test leads Sangeetha who had tested the plan cache, and kindly provided this example of an MPA intensive query: A workload that has stored procedures with a large # of parameters (say > 100, > 500), and then invoked via large ad hoc batches, where each SP has different parameters will result in a plan being cached for this “exec proc” batch. This plan will result in MPA.   Exec proc_name @p1, ….@p500 Exec proc_name @p1, ….@p500 . . . Exec proc_name @p1, ….@p500 Go   Another workload would be large adhoc batches of the form: Select * from t where col1 in (1, 2, 3, ….500) Select * from t where col1 in (1, 2, 3, ….500) Select * from t where col1 in (1, 2, 3, ….500) … Go  In Denali all page allocations are handled by an "Any size page allocator" and included in 'max server memory'. The buffer pool effectively becomes a client of the any size page allocator, which in turn relies on the memory manager. - Guy Originally posted at http://blogs.msdn.com/b/sqlosteam/

  Read the article

• Arçelik A.S. Uses Advanced Analytics to Improve Product Development

  - by Sylvie MacKenzie, PMP

  "Oracle’s Primavera P6 Enterprise Project Portfolio Management’s advanced analytics gives us better insight into the product development process by helping us to identify potential roadblocks.” – Iffet Iyigun Meydanli, Innovation and System Development Manager, R&D Center, Arçelik A.S. Founded in 1955, Arçelik A.S. is now the leading household appliance manufacturer in Turkey, and the third-largest household appliance company in Europe. It operates 14 production facilities in five countries (Turkey, Romania, Russia, China, and South Africa), with international sales and marketing offices in 20 countries. Additionally, the company manages 10 brands (Arçelik, Beko, Grundig, Blomberg, Elektrabregenz, Arctic, Leisure, Flavel, Defy, and Altus). The company has a household presence in more than 100 countries, including China and the United States. Arçelik’s Beko brand is among the top-10 household appliance brands in world, as a market leader for refrigerators, freezers, and washing machines in the United Kingdom. Arçelik implemented Oracle’s Primavera P6 Enterprise Project Portfolio Management for improved management of its design and manufacturing projects. With the solution, Arelik has improved its research and development (R&D) with the ability to evaluate technology risks when planning its projects. Also, it is now more easy to make plans for several locations, monitor all resources, and plan for future projects.  Challenges Improve monitoring of R&D resources?including human resources and critical laboratory equipment?to optimize management of the company’s R&D project portfolio Establish a transparent project platform to enable better product and process planning, gain insight into product performance, and facilitate advanced analytics that support R&D and overall business decisions Identify potential roadblocks for better risk management Solutions Worked with Oracle Partner PRM to implement Oracle’s Primavera P6 Enterprise Project Portfolio Management to manage the entire household-appliance, R&D project portfolio lifecycle, enabling managers and project leaders to better track and monitor resources and deliverables in real time Improved risk analysis and evaluation abilities for R&D projects Supported long-term planning needs Used advanced reporting features to capture data needed for budgeting and other project details, including employee performance evaluations Improved monitoring abilities and insight into the overall performance of products postproduction Enabled flexible, fast, and customized reporting with the P6 dashboard on a centralized platform to meet custom reporting needs for project leaders and support on-time and on-budget deliverables Integrated with other corporate departments, such as accounts payable, to upload project invoice data into the Primavera solution and the company’s e-mail system, so that project leaders will be alerted about milestones and other project related information Partner“Oracle Partner PRM provided us with a quick, reliable, and solution-focused approach to its support,” said Iffet Iyigun Meydanli, innovation and system development manager, R&D Center, Arçelik A.S. “The company’s service covered the entire spectrum of our needs, including implementation, training, configuration, problem solving, and integration.”

  Read the article

• No description for any page on the website is available in Google despite robots.txt allowing crawling

  - by Abhijit

  I seem to have the weirdest issue with Search Engine Optimization, and I asked the IT folks at my university, I asked people on Joomla forums and I am trying to sort this issue out using Google Webmaster Tools for more than 2 months to little avail. I want to know if I have some blatantly wrong configuration somewhere that is causing search engines to be unable to index this site. I noticed a similar issue with another website I searched for online (ECEGSA - The University of British Columbia at gsa.ece.ubc.ca), making me believe this might be a concern that people might be looking an answer for. Here are the details: The website in question is: http://gsa.ece.umd.edu/. It runs using Joomla 2.5.x (latest). The site was up since around mid December of 2013, and I noticed right from the get go that the site was not being indexed correctly on Google. Specifically I see the following message when I search for the website on Google: A description for this result is not available because of this site's robots.txt – learn more. The thing is in December till around March I used the default Joomla robots.txt file which is: User-agent: * Disallow: /administrator/ Disallow: /cache/ Disallow: /cli/ Disallow: /components/ Disallow: /images/ Disallow: /includes/ Disallow: /installation/ Disallow: /language/ Disallow: /libraries/ Disallow: /logs/ Disallow: /media/ Disallow: /modules/ Disallow: /plugins/ Disallow: /templates/ Disallow: /tmp/ Nothing there should stop Google from searching my website. And even more confusingly, when I go to Google Webmaster tools, under "Blocked URLs" tab, when I try many of the links on the site, they are all shown up as "Allowed". I then tried adding a sitemap, putting it in the robots.txt file. That did not help. Same exact search result, same behavior in the "Blocked URLs" tab on the webmaster tools. Now additionally, the "sitemaps" tab says for several links an error saying "URL is robotted out". I tried those exact links in the "Blocked URLs" and they are allowed! I then tried deleting the robots.txt file. No use. Same exact problem. Here is an example screenshot from Google's Webmaster Tools: At this point I cannot give a rational explanation to why this is happening and neither can anyone in the IT department here. No one on Joomla forums can seem to understand what is going on. Based on what I explained, does it seem that I have somehow set a setting in the robots.txt or in .htaccess or somewhere else, incorrectly?

  Read the article

• Ubuntu Linux won't display netbook's native resolution

  - by Daniel

  FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

  Read the article

< Previous Page | 455 456 457 458 459 460 461 462 463 464 465 466  | Next Page >