Search Results

Search found 2018 results on 81 pages for 'bayesian networks'.

Page 46/81 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• Flash Media Server slow over SSL

  - by Antilogic

  We are using FMS to host a VoD site. We host FMS internally (we do not use a CDN). We recently installed an SSL certificate to alleviate connection issues for clients (they're networks either block or don't support RTMP), however we're noticing that when streaming in RTMPS connections are drastically slower (on the order of Mbps). I know SSL causes some amount of over head but both client and server show almost no signs of exertion. Speedtest.net and a locally hosted speed test confirm that bandwidth is not an issue. I'm really not a network guru, so I'm at a loss as to where to check next. Do any of you have an idea why streaming media would run so slow over SSL?

  Read the article

• Establish connection with an IP camera behind a modem-router assigned with a private IP by Internet Service Provider?

  - by silvernightstar

  Most solutions out there require the modem-router to have been assigned a public IP by the ISP. After which, one can access the IP camera via a portforward setting on the router. However, my ISP only provides private IPs internal to their system (they probably have a limited pool of public IPs). So I am unable to view my IP cameras in the way described. I'm wondering if there's a way to work around this problem without having to need a public IP. Since, after all, two users on Yahoo Messenger or Facebook Chat are able to find one another and exchange data despite both sides being within the internal networks of their respective ISPs. Given that I only plan to view my IP cameras via iOS or Android running on a smartphone or tablet, any ready-to-use solutions out there?

  Read the article

• How to route packets from Wi-Fi to Ethernet on OSX?

  - by Alexander Artemenko

  I have a trouble, configuring a home network. Here is how my devices are connected together: Internet     ? Wi-Fi Router ? MacBook     ? iMac ?ethernet cable? Synology NAS I have no ability to plugin NAS right into the Wi-Fi router. The problem is that MacBook does not see NAS, because they are in different networks — I configured Wi-Fi Router to serve 192.168.10.0/24 addresses, and configured iMac's ethernet connection to use 192.168.20/24 network. Is there a way to setup route from MacBook to the NAS?

  Read the article

• Enterprise laptop doesn't recognize WiFi

  - by Michiel

  My cousin is using an enterprise laptop for home work, but for some reason she can't connect to her home WiFi. The laptop isn't able to detect any WiFi networks, although she used to be able to detect and connect to the network. Whenever I troubleshoot for possible issues, Windows Vista is telling me the switch for wireless reception is turned off, but I'm sure it's turned on (If I turn it on, the HP Wireless Assistant tells me it's turned on, so...). But if I take a look at the settings, I get this message (sorry it's in Dutch): So for some reason, the WLAN reception is deactivated and I cannot activate this... Does this have something to do with the laptop being an enterprise laptop? Or is there a simple setting I missed? The most recent driver of the Wireless Network Card (Intel Wireless 5100) is installed.

  Read the article

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• Windows RRAS multi-network routing

  - by Brent Pabst

  I am looking for advice, comments and suggestions from anyone who has used Windows RRAS (2008 R2 Pref.) as the primary routers for our multiple offices. We have multiple physical office locations and are looking into utilizing Windows Server 2008 R2 Core as redundant Active/Active routers/gateways for our network as opposed to a physical router from Cisco or Juniper, it costs a lot less! Any problems, issues or documentation anyone would recommend? We will still most likely have a firewall on the edge but the majority of our traffic will be inter-office with some external services. We will be using multiple Class B networks across our two offices.

  Read the article

• Is it possible to sync specific router settings across multiple routers?

  - by Betard Fooser

  I recently purchased a second Linksys wireless routers set up on the other side of my home and I am wondering if it is possible to somehow sync particular settings between the two? For instance what I am really after is the "MAC Filter List". I would "like" to be able to maintain the list on both routers without having to manually type in the field values. maybe this isn't possible, or has an easy answer, but hopefully those of you who know will cut me a bit of slack. I tried to "google" the answer to this of course, but it seems any searches with the words "sync" and "router" and/or "wifi" result in pages of people having issues with synching their iOS devices over wifi. I would say that have decent amount of networking knowledge in regards to average home networks, and I imagine in larger businesses / corporations they must have a "simpler" way of maintaining things like this. Any insight to point me in the right direction will be much appreciated.

  Read the article

• Dial-in VPN Routing issue when on 192.168.x.x network range

  - by Ian

  I'm not an expert on networks but have a small office on the 192.168.x.x. range which is managed by a vigor (2800) router. I have enabled the VPN dial-in option on the router so I can get to the server on 192.168.1.100 which works fine from my macbook when i'm NOT on a local network with that is on the 192.168.x.x range. e.g. works fine when I tether over my Android smartphone but when I try & connect when on my home network, it connects, I can access the router (192.168.1.1) but cannot access 192.168.1.100 - traceroute doesn't hop via 192.168.1.1 I have enabled "send all traffic over VPN connection but again, not joy... Feels like the osx platform isn't routing the traffic out to the vpn endpoint as the destination address is on the local subnet but expect it would be. This work fine on a windows PC on the same home network. Any thoughts on what the issue could be?

  Read the article

• Two routers on the same network

  - by qroberts

  My ISP has supplied me with a modem/router all in one and it isn't very good. It loses its settings and dies frequently. So I have another router in my apartment (Linksys wrt310n) that is connected to the modem via LAN-LAN port connections. I want to give my Linksys router the DHCP role and also have the ISP modem DMZ everything to the Linksys router. I want to be able to have all computers connected to both routers on the same network as well. I have been able to make it so that the Linksys has a DMZ to it from the ISP modem, but ISP modem LAN port - Linksys WAN port, so they were on different networks. Is there a way to have it so that both of them are on the same network but the Linksys router handles DHCP and port forwarding?

  Read the article

• scp to remote servers stalls, unable to isolate cause

  - by Rolf

  When I copy a large file (100+mb) to a remote server using scp it slows down from 2.7 mb/s to 100 kb/s and downward and then stalls. The problem is that I can't seem to isolate the problem. I've tried 2 different remote servers, using 2 local machines (1 osx, 1 windows/cygwin), using 2 different networks/isps and 2 different scp clients. All combinations give the problem except when I copy between the two remote servers (scp). Using wireshark I could not detect any traffic volume that would congest the network (although about 7 packets/sec with NBNS requests from the osx machine). What in the world could be going on? Given the combinations I've used there doesn't seem to be any overlap in the thing that could be causing the trouble.

  Read the article

• Systemd-networkd: How can I prepend a static nameserver entry to DHCP-discovered nameservers?

  - by runiq

  I'm using systemd 213 on Arch Linux, and systemd-networkd with DHCP to connect to the internet. I'm also running a caching DNS server on 127.0.0.1. I'd like to make this server the first DNS server in the list, but I'd also like to use the nameservers discovered by systemd-networkd's DHCP facility. Using a static resolv.conf isn't really possible, because I connect to networks with different DNS settings. I know I can set fallback DNS servers in /etc/systemd/resolved.conf, but is there a way with systemd-networkd to prepend my local DNS server to those discovered by DHCP?

  Read the article

• Cross-platform automatic adhoc wifi?

  - by marienbad

  I'm not very knowledgeable about wifi, but I understand the notion of Adhoc networks (Wifi without a router), so... Is there a standard (or widely implemented) way of letting a device "momentarily" negotiate a wifi connection (Adhoc network or otherwise) directly to another device, transfer some data, and then quit, all without any user intervention on either device? For example, let's say I have a PC and an ereader in the same room and there's no nearby wifi router for either of these devices to connect to. I want to send a file from PC to ereader but I don't want to do the work of setting up network, selecting an SSID, or entering passwords. Is that possible?

  Read the article

• How to choose an open source, Asterisk friendly firewall?

  - by Lucas

  I'm in pain. We are moving to a SIP based VOIP system and for whatever reason, we could not get our hosted Asterisk solution to work with our Sonicwall. Our VOIP provider gave up and is recommending an open source vendor, pfSense. A little background: We have about 30 users in our network. We use a few IPSec VPN connections for remote networks. I would like, but don't need, application layer filtering. We're active internet users, so properly traffic shaping is probably a concern. How can I tell if an open source firewall will handle VOIP setup smoothly with a hosted Asterisk system?

  Read the article

• Finding, which web component is causing problems during page loading

  - by Juhele

  I am using windows version of Firefox 5.0 and last few days I found that on one website (similar focus as stackexchange but in Czech), is something wrong as my browser loads it very slowly (while the connection is ok and never had problems with it). There is also another guy trying to solve the almost the same problem, but no help yet. So I would ask, whether there is some Firefox plugin showing which page components are loading and which could help me to find out the problem. I am writing from office pc so we have blocked all the social networks like FB, Twitter etc. and I also use Adblock Plus - however, deactivating it does not have any effect on it. thanks

  Read the article

• Is there any way to prevent a Mac from creating dot underscore files?

  - by SoaperGEM

  At work we're letting one of our very tech savvy clients actually help out a little with a few development projects specific to him. However, he uses his own personal Macbook, and as he edits files on our (Windows) networks, his Macbook always creates a bunch of unnecessary meta files that we end up deleting later. For instance, it creates a file called .DS_Store in any directory he opens, as well as "dot underscore" files for each file he edits. So for instance, if he's editing a file called "Main.php", his Macbook will create another file called "._Main.php". I know there are ways to prevent creation of .DS_Store files, but none about how to prevent creation of these hidden files prefixed with dot underscore. Is there any way to turn that off on Macs? Any way to prevent it from creating those files in the first place?

  Read the article

• Asus EEE PC 1005HA (XP Home) refuses to connect to Virgin Mobile MiFi

  - by Dennis Wurster

  My client has an Asus EEE PC model 1005HA, and we're attempting to connect it to the WiFi network created by a VirginMobile MiFi unit. They also have a MacBook Pro with Snow Leopard that has absolutely no issue connecting to the MiFi. The specific symptom is that the netbook fails to lease an IP address from the MiFi unit. I supply the 12-digit numerical password (WPA) to the netbook, it throws a 'waiting for network' dialog with an indeterminate progress indicator, and then times out. Update: We've determined that this behavior has stopped when the EEE PC and the MiFi unit were taken out of the client's home, and to a different home that didn't have an existing wifi network. Similarly, when taken to a third location that didn't have wifi, the EEE PC and MiFi got along swimmingly. My current theory is that the existing wifi networks and the wifi leg of the MiFi unit are on the same channel and competing with one another. Perhaps the MacBook Pro has the capability to overcome this interference, while the EEE PC doesn't.

  Read the article

• Laptop is super slow on network

  - by Gary

  So on our network we have a bunch of wireless macs and window Operating laptops, we have a network setup with 802.11g,b,n. All the laptops seem fine except one which is only getting speeds of 54Mb. I have changed the encryption from AES to TKIP and reset the connection, i have updated the drivers, tried plugging it into the LAN and still same slow speed. Apparently the laptop with the slow speed is fine on other networks. I don't know what to do, can anyone help me?

  Read the article

• Which firewall ports do I need to open in order for a domain trust to work?

  - by Massimo

  I have two Active Directory domains in two different forests; each domain has two DCs (all of them Windows Server 2008 R2). The domains are also in different networks, with a firewall connecting them. I need to create a two-way forest trust between the two domains and forest. How do I configure the firewall to allow this? I found this article, but it doesn't explain very clearly which traffic is required between DCs, and which traffic (if any) in needed instead between domain computers in one domain and DCs for the other one. I'm allowed to permit all traffic between the DCs, but allowing computers in one network to access DCs in the other one would be a little more difficult.

  Read the article

• What could be the maximum number of hosts on a 100BaseTX ethernet network ?

  - by snowflake

  Hello, I'm having two ip networks (192.168.1.x and 192.168.2.x) bridged on a server, but all hosts (fixed IPs) are on the same physical 100BaseTX ethernet (with a daisy chain of 48ports switchs). Often, I loose link between the server and hosts of the second network. Usually if I reboot the host, the connection work again, and if I force connection to be active, the connection keep alive until I ping after a while without active connection. I'm wondering how many hosts can be connected on the same network without troubles, and eventually how many switches can be daisy chained ? I suppose maximum length between hosts to be 100meters to the hub or 200meters between extremity of the network. Somebody is suggesting 8 switches here : http://www.tek-tips.com/viewthread.cfm?qid=1137879&page=12 Any comments on how to find a solution to the problem and not answering directly to the question are welcomed!

  Read the article

• when connected to vpn, can't access certain things

  - by shsteimer

  my companies vpn is not a standard windows vpn. It uses Juniper Networks and it intalls locally something called "Host Checker" prior to allowing me to connect. I have noticed 2 things that I can't access while on vpn. etrade.com - no idea why this specific website, but I can't get to it, maybe https? use of my magik jack - I'm assuming this is some sort of a port conflict issue. if im on a call when i connect, i lose all reception. if i try to make a call after conected, ic an't even get it to dial. Can anyone tell me how I would even begin to debug this. I expect if I call the help desk they won't be much help, but if I can tell them the specific problems of conflicts, maybe I have a chance of them working with me to get it working.

  Read the article

• Get the interface and ip address used to connect to a specific host (ip)

  - by umop

  I'm sure this has been asked and answered before, but I wasn't able to find it, so hopefully this will at least link someone to the right place. I want to find out my local interface and ip address used to reach a certain host. For instance, if I had 3 adapters connected to my box and they all three went to different networks, I'd like to know which of the three (specifically, its ip address) is used to reach my.local.intranet (in this case, it would be a vpn tunnel interface). I suspect this is a job for ifconfig or traceroute, but I haven't been able to find the correct switches. I'm running OSX 10.7 (Darwin) Thanks!

  Read the article

• Dealing with SMTP invalid command attack

  - by mark

  One of our semi-busy mail servers (sendmail) has had a lot of inbound connections over the past few days from hosts that are issuing garbage commands. In the past two days: incoming smtp connections with invalid commands from 39,000 unique IPs the IPs come from various ranges all over the world, not just a few networks that I can block the mail server serves users throughout north america, so I can't just block connections from unknown IPs sample bad commands: http://pastebin.com/4QUsaTXT I am not sure what someone is trying to accomplish with this attack, besides annoy me. any ideas what this is about, or how to effectively deal with it?

  Read the article

• What virtualization solution should I try next, after hitting problems w/ VMWare Player in dual-netw

  - by Alex R

  I have been using VMWare Player 2.5 for a while (Ubuntu guest on Vista host, 32-bit). VMWare had worked great until now but then I hit a brick wall: Due to some reorganization of my home network, the host machine now has to use a wireless connection to reach the Internet, while the printer, fileserver, and other important stuff are attached to a local gigabit hub. I have tried several tricks, such as editing the .vmx file, changing settings in vmnetcfg, etc, but I'm still unable to get the virtual Ubuntu box to connect each of the two virtual NICs to different networks (I did get it to recognize two NICs, but both DHCP'd onto the gigabit LAN). So, I'm ready to dump vmware for something with a little more low-level control of network settings. Virtualization is such a crowded space, I could spend months evaluating every product out there. I'm hoping for a shortcut... Can anyone recommend the best VM for my situation described above? Thanks

  Read the article

• Automatically Connecting to Hidden SSID WiFi Network

  - by Zack

  My MacBook Pro will not automatically connect to a Wireless network with a hidden SSID. It makes me select the "Join Other Network..." in the Airport menu (in the system tray), where I need to input the name of the network, then security type, password and wait for it to connect. This is becoming increasingly annoying to have to do every time I come back to my desk. I'm running Mac OS X 10.5 and there doesn't seem to be an option to connect to a specific network, but rather "Preferred Networks." The only network I have set as Preferred that's in range is my home network, and it still doesn't automatically connect. Making the network publicly visible isn't under my control, so I'm stuck with what's currently in place. Reader's Digest version: How do I make my MacBook Pro automatically connect to a WiFi Network with a hidden SSID without having to "configure" it every time I want to connect?

  Read the article

• SMS Gateway Suggestions Needed

  - by SidC

  Hi All, Our website is written using PHP and is powered by a hosted Linux web server. We want to allow our users to receive SMS messages when they've received intranet-site messages from fellow users - SMS Notification. What is required to implement this functionality? Are there open source (free?) server applications that address this? Do we need to contract with wireless carriers to send messages to their networks? What, if any fees, must be paid to them? Thanks, Sid

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >