Search Results

Search found 33882 results on 1356 pages for 'command window'.

Page 460/1356 | < Previous Page | 456 457 458 459 460 461 462 463 464 465 466 467  | Next Page >

• How can I change ACLs recursively using cacls.exe?

  - by maaartinus

  I want to restrict the access for everything inside the work directory to me and the system only. I tried this with the following command: cacls.exe work /t /p 'PIXLA09\Maaartin:f' 'NT AUTHORITY\SYSTEM':f However it doesn't work at all. The following command should show only the two specified users but instead shows a very long list of permissions: cacls.exe work/somedirectory I tried to use /g instead of /p, too. Since I didn't use /e the permissions shouldn't get edited but replaced. Any ideas what's wrong?

  Read the article

• Added autossh in rc.local, but the dynamic port forwarding won't work

  - by rankjie

  I am using Rasbian on my newly arrived Rasp.Pi, and decided to make it my own proxy server. Now I need to set up a ssh tunnel on the Pi to my Linode server, and make it auto start with the system. What did I do: Add this line to /etc/rc.local autossh -f theRemoteServer -N -D 5555 -L 1234:localhost:22 After I reboot, I found out that I can't use the localhost:5555 as a socks proxy. So I type the command ps -A | grep ssh then I can see the autossh and ssh all running: pi@raspberrypi ~ $ ps -A | grep ssh 2018 ? 00:00:00 sshd 2116 ? 00:00:00 autossh 2119 ? 00:00:00 sshd 2195 ? 00:00:00 sshd 3173 ? 00:00:00 ssh (I've installed autossh, and the command works if I type it manually.) (I use the passwordless key auth, so I don't have to enter password.) Much appreciated and sorry for my poor English.

  Read the article

• How do I SCP/FTP to a Coraid SR2421

  - by Pitto

  I need to save data to a Coraid SR2421. I am no expert and I'm trying to understand how this costy piece of hardware works. All I have is a Ethernet cable connecting my laptop and the coraid to a switch and the coraid's console with cursor blinking. Any kind of help would be greatly appreciated. edit and further explanation: I've tried using software on the coraid website but It's not working. So I've contacted the support and they sent me a file to upload on the coraid. It looks like if I upgrade coraid's firmware then I'll be able to use the coraid software on the windows side. That's why I'd need SCP/FTP or any kind of solution to copy a file in the partition that can be read from coraid console command line so I can launch the update command as requested. I hope I was a bit clearer now.

  Read the article

• Windows7 - Mouse not working, all windows + tray act like inactive

  - by Teo.sk

  I have this problem for two days now. First when it happened, logging out and back in helped, but now this occurs right after booting. I cannot activate any window by clicking into it, and also cannot minimalise, or close it with mouse. In few applications I cannot even interact with them with mouse (e.g. clicking on links in browser). I can scroll an active window with the trackball, and sometimes everything works normally for a little while. Everything works fine, when I use keyboard for this, I can resize, move, close windows with keyboard shortcuts, etc. I ran a complete Avast! scan, but it found nothing important. Also event viewer did not show any relevant errors. Here's a log from HijackThis if it helps anything.

  Read the article

• Looking for a router-like web interface for my Debian gateway.

  - by marcusw

  Hey, I need a web interface program for my debian gateway which has the features of a router's one. Specifically, I must be able to easily Forward ports to various clients on the LAN or the router itself (it's also a server) Manage a DHCP server preferably including DHCP reservation for certain MACs Give me a list of the connected DHCP clients (optionally) Show which clients are the most active as far as bandwidth (something like iftop) Alternatively, it could be a graphical app which I could tunnel over ssh. No command line programs please...I'm used to doing this stuff with a point-and-click interface. Not adverse to command-line setup; just need to be able to reconfigure things graphically. Have a working LAMP setup. I've tried webmin, but it didn't satisfy the "easy" part...too many clicks and too many meny options.

  Read the article

• Parse text file on click and display

  - by John R

  I am thinking of a methodology for rapid retrieval of code snippets. I imagine an HTML table with a setup like this: one two ... ten one oneTwo() oneTen() two twoOne() twoTen() ... ten tenOne() tenTwo() When a user clicks a function in this HTML table, a snippet of code is shown in another div tag or perhaps a popup window (I'm open to different solutions). I want to maintain only one PHP file named utitlities.php that contains a class called 'util'. This file & class will hold all the functions referenced in the above table (it is also used on various projects and is functional code). A key idea is that I do not want to update the HTML documentation everytime I write/update a new function in utilities.php. I should be able to click a function in the table and have PHP open the utilities file, parse out the apropriate function and display it in an HTML window. Questions: 1) I will be coding this in PHP and JavaScript but am wondering if similar scripts are available (for all or part) so I don't reinvent the wheel. 2) Quick & easy Ajax suggestions appreciated too (probably will use jquery, but am rusty). 3) Methodology for parsing out the functions from the utilities.php file (I'm not to good with regex).

  Read the article

• Ubuntu 12.04.1 LTS and Nvidia dirver (304.51) 64bit: problem 640x480

  - by nibianaswen

  I have a problem with this configuration: Asus K55V, Ubuntu 12.04 LTS and Nvidia driver 304.51. I have remove the nouveau driver with: apt-get --purge remove xserver-xorg-video-nouveau I installed the official nvidia driver (from www.nvidia.com) but when I reboot the PC the resolution of screen is only 640x480 and the monitor is resized. Mo solution at this problem if i change the xorg.conf. Now i have uninstall the nvidia driver and reinstall with sudo apt-get purge nvidia-current sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current When I reboot the screen resolution and size is OK, but if I start nvidia-setting I received the message: You do not appear to be using the NVIDIA X driver. and with command: sudo lshw -c display | grep driver I received configuration: driver=i915 latency=0 This sound like the system is using the Intel card. When I launch command lspci | grep VGA the output is: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1058 (rev ff) And there is no /etc/X11/xorg.conf. I have read a lot of guides on internet but without success.. How i can use nvidia card with the driver that i have installed?

  Read the article

• Why is apt-cache so slow?

  - by Damn Terminal

  After upgrade to Trusty (14.04) from Saucy (13.10), all apt operations are very slow. Even those that do not include downloading anything, or connecting to any servers. For example, displaying the apt policy # time apt-cache policy [...] real 0m8.951s user 0m5.069s sys 0m3.861s takes almost ten seconds! Mostly a weird lag right after issuing the command. And it's the same even if I issue the same command again. On another system it doesn't take a tenth of a second real 0m0.096s user 0m0.070s sys 0m0.023s The other system is a little beefier but there was no noticeable difference before the upgrade. It's the same with apt-get, anything apt-related. How do I find out the source of this lag and fix it? Additional info: # cat /etc/nsswitch.conf # /etc/nsswitch.conf # # Example configuration of GNU Name Service Switch functionality. # If you have the `glibc-doc-reference' and `info' packages installed, try: # `info libc "Name Service Switch"' for information about this file. passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis BTW is my understanding of how apt-cache works correct? It doesn't make any network connections when I run apt-cache policy, right? In case I'm wrong and it matters, here are my sources https://gist.github.com/anonymous/02920270ff68e23fc3ec

  Read the article

• Can you specify git-shell in .ssh/authorized_keys to restrict access to only git commands via ssh?

  - by Matt Connolly

  I'd like to be able to use a ssh key for authentication, but still restrict the commands that can be executed over the ssh tunnel. With Subversion, I've achieved this by using a .ssh/authorized_keys file like: command="/usr/local/bin/svnserve -t --tunnel-user matt -r /path/to/repository",no-port-forwarding,no-agent-forwarding,no-X11-forwarding,no-pty ssh-rsa AAAAB3NzaC1yc2EAAAABIetc... I've tried this with "/usr/bin/git-shell" in the command, but I just get the funky old fatal: What do you think I am? A shell? error message.

  Read the article

• GRUB2 UEFI booting from LVM on RAID (with XEN)

  - by pavian

  I'm experimenting with booting root fs from LVM volume inside the raid (mdraid superblock 1.x) via UEFI with GRUB2. Also I'm using Xen hypervisor. From grub command line I can see my lvm volume (ls command) but I got kernel panic due to "unable to mount root fs". I saw a note in this article telling it's probably impossible to boot root fs from raid via UEFI, but I don't understand the reason why not. Is it possible to boot linux with this configuration without the initramfs (which I don't won't to use)?

  Read the article

• recovering a broken GNOME-desktop in debian wheezy

  - by morgon

  an hour ago I had a working gnome-desktop on my debian system (thinkpad x121e). Then I installed compiz that crashed. After a reboot the gnome-desktop no longer started. Then I did some upgrades with aptitude, all gnome-packages seem to be there, but it is still not working. On startup I get a login-dialog, when I login there is no desktop, only some window-manager running that allows me to start a terminal. When I run "gnome-session" I get the error message "failed to load session "gnome". So how do I get back to a working desktop? I have tried "tasksel install gnome-desktop --new-install" but that just displays a progress window that after half an hour still shows 0%. Can someone help me please? I have tried "

  Read the article

• Escape a ! in the password parameter of wget

  - by Dave

  I'm trying to execute something like this: wget --user=foo --password=bar! url The ! in the password is causing problems. I've tried escaping it with \, as in --password=bar\! I've tried encapsulating in single and double quotes. I put the password in a separate file and tried --password=cat pass.txt Each time, I get a 403 Forbidden. Using -d, I see that the SSL handshake is successful. On the Windows command line, the command works. My assumption is that I need to escape the ! differently, but I don't know how else.

  Read the article

• XCP vm created via xl create doesn't show up in Xencenter neither in xe vm-list

  - by user138664

  i am running XCP 1.4.90.530.170661 and i have many PV guests running and created via XenCenter. I have created now an openwrt PV guest via the xl create command but it doesn't show up in Xencenter neither in the vm-list command: xe vm-list uuid ( RO) : 6d29aac1-67ff-f83e-4dbc-894a3b6b9c10 name-label ( RW): slitaz power-state ( RO): running uuid ( RO) : 07d96dd1-8223-cd1c-587d-ae37e48d267b name-label ( RW): xen-centos6 power-state ( RO): running uuid ( RO) : 3164bcf1-e43c-badb-e0cf-5423751fffb9 name-label ( RW): xenwin7 power-state ( RO): running uuid ( RO) : 8a31725e-4bcb-48ac-ba7b-e7c1ba310789 name-label ( RW): Control domain on host: xen-mini power-state ( RO): running xl list Name ID Mem VCPUs State Time(s) Domain-0 0 300 2 r----- 4862.5 xenwin7 2 766 1 -b---- 4933.1 slitaz 10 255 1 -b---- 30.8 xen-centos6 11 767 1 -b---- 46.9 openwrt 12 32 1 -b---- 6.8 are these two different kinds of PV vm? if yes, is there a way to export the "xl create" one as xva/ova and import it to show up like the others? Thanks in advance, /c/

  Read the article

• I just recursively chmod'd everything under / to 750. Any tips?

  - by Ouairz

  I won't be the first and I won't be the last, I suppose. While playing around with the find command, I made a whoops and it would appear that instead of changing the permissions of the ~/web directory to 750, it changed the permissions of the entire filesystem (/) to 750, however I'm not certain, but any attempt to investigate is thwarted by Permission denied messages. For everything. This was the offending command: sudo find ~/web . type d -exec chmod 750 {} If I'm not mistaken, the Ubuntu team disabled root logins as a safety precaution so I'm out of ideas. I'm (obviously) a total newbie when it comes to file permissions so I was wondering if anyone had some good or even some bad advice to share. I've mentally prepped myself to losing everything on the computer which is only of mild consequence, since I have backups, but I did do a bit of work on this box over the week and it would be a shame to lose it all due to a boneheaded mistake. If you are reading this message, ask yourself, have you backed up any of your work recently? Thanks in advance for any insights. Feel free to scold me for using sudo carelessly

  Read the article

• Kill Leaking Connections on SQL Server 2005

  - by Thierry Brunet

  We have a legacy ASP application that somewhere leaks SQL Connections. In Activity Monitor, I can see a bunch of idle processes with Last Batch times over an hour old. When I look at the T-SQL command batch, these are always FETCH API_CURSORXXX, which from my understanding is caused by improperly closed ASP ADO Recordsets. While we are try to pinpoint the offeding code, is there a way for me to monitor which requests open which cursors? I'm assuming profiler, but I'm not sure what I should be monitoring exactly. I can see a bunch of calls to sp_cursoropen but I don't see the API_CUSORXXX name anywhere. Second, would anyone be able to suggest a script we could run to kill these processes based on the Last Batch time 10 minutes and Last Batch Command being FETCH API_CURSORXXX? For various reasons, we unfortunately don't have any SQL Server DBAs.

  Read the article

• How to query a DHCP server to get the local DNS servers

  - by Dan Berlyoung

  I have a ClarkConnect (CentOS based) box running as my home router on a RR connection. I had the DNS servers set up to use Google's DNS server. I want to change them back to the local DNS servers but I can't find an obvious/easy way to get those address short of a) reconfiguring the router's network to DHCP them (would rather not interrupt everyone) or b) calling their tech support (kill me now!). Is there a command line tool/command I can use to query the DHCP server on the external NIC to see what DNS servers it would set me up with w/o munging my existing setup?

  Read the article

• How to check if redis master is OK?

  - by e-satis

  On the documentation, they advice the monitor command. But it has a 50% performance penalty for the whole system, and how should I do that ? Whatching the ouput using SSH until I don't see anything ? Let's say I have 3 servers: 1 with a redis master, 1 with a redis slave, and one with my website querying the redis master. How can I, from my website server, make cleany the decision to fallback to the slave by sending the SLAVEOF NO ONE command ? My first step would be to put some kind of timeout check with a simple ping, just to be sure the server is online. But for redis specifically, I have no clue.

  Read the article

• Postgresql starup script for second instance?

  - by Andrius

  I need to run my second postgresql instance when linux boots. I added this command (like in postgresql documentation) in rc.local: /usr/lib/postgresql/9.1/bin/pg_ctl start -l logfile -D /var/lib/postgresql/9.1/main2 But if I try to run pg_ctl: cannot be run as root Please log in (using, e.g., "su") as the (unprivileged) user that will own the server process. t, it gives me this error: How can I specify to run that command as postgres, but actually execute it with root (because root owns it). Or is there some better way to make second init script for postgresql? P.S. (I'm using Ubuntu)

  Read the article

• Sound card not detected in 13.04

  - by Ganessh Kumar R P

  I have a problem with my sound card. I don't have volume up or down option anywhere. In the setting -> Sound I don't have any card detected. But when I run the command sudo aplay -l, I get the following output **** List of PLAYBACK Hardware Devices **** Failed to create secure directory (/home/ganessh/.config/pulse): Permission denied card 0: MID [HDA Intel MID], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 And the command lspci -v | grep -A7 -i "audio" outputs 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at f0f20000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode]) -- 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d3efc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 07:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 So, I assume that the drivers are properly installed but still I don't get any option in the settings or volume control. The same card used to work well back in 2010 versions(04 and 10) Any help is appreciated. Thanks

  Read the article

• Installing Java 6 on Ubuntu 10.04 fails on missing Java 6 JRE package

  - by David S

  I'm trying to install Java 6 on Ubuntu 10.04 and it's been harder than it should be. In another question about installing Java on Ubuntu/Linux it said that I needed to do the following: sudo add-apt-repository "deb http://archive.canonical.com/ lucid partner" However, that failed and I kept getting: sudo: add-apt-repository: command not found The solution to this, was to run: sudo apt-get install python-software-properties So, that seemed to work and the command above to "add-apt-repository" seems to complete with no errors. And I have run the following to confirm it got added. sudo vi /etc/apt/sources.list But, now when I run the following: sudo apt-get install sun-java6-jre I get: Reading package lists... Done Building dependency tree Reading state information... Done Package sun-java6-jre is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package sun-java6-jre has no installation candidate Where do I go from here?

  Read the article

• tar - exclude certain files

  - by Alan

  I wish to tar all files in a directory and its subdirectories that do NOT end in .jpg, .bmp, .gif, or png. So, given the following folders and files: foo/file.txt foo/file.gif foo/bar/file foo/bar/image.jpg I want to tar only the files file.txt and file. file.gif and image.jpg should be ignored. I would also like to maintain the folder structure. My first thought was to pipe the results of the find command in conjunction with grep -v ".jpg|.gif|.bmp.png" to a text file, and then use the tar include argument to feed it that list of files. However, the results of the grepped find command also contain directories (in the example above, it would be "foo" and "foo/bar"), and when a directory is fed to tar, it includes all files in that directory, so I would end up with a tar file containing all of the files--not what I want. Is there any way to prevent find from outputting directories? Is there a far easier way to approach this?

  Read the article

• SEO for maps-based websites that require user interaction

  - by j0nes

  I have a website that basically shows a lot of locations worldwide on a Google Maps like interface. The map itself is built using the Leaflet library and Open Street Map tiles. In the map, I show markers at each location I have. There is a popup window when I click on a marker that shows additional information and contains links to "detail" pages for this location. I fetch the location data for the viewpoint from an AJAX call from my server, so the additional information is not available in the HTML page itself. The detail pages are the pages my users are interested in. My normal users load the map, search the location they are interested in, click on a marker and click on a link in the popup window. However for search engines, this might look different. As this navigation pattern relies on user interaction, I think they might not be able to find the details page. My questions: Are search engines able to follow a navigation path like outlined above? How can I improve the navigation for search engines? (For example showing textual links below the map, sitemaps...) How important are internal links for SEO?

  Read the article

• Cannot increase my screen resolution

  - by Patrick Beardmore

  I am trying to install my new monitor but my Graphics Adapter (Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family) does not offer a resolution of 1920x1080 in the [Display Properties Settings] window. It only offers up to 1360x768. Can anyone explain to me how I can increase this number to the correct resolution. The monitor does show my the windows desktop, albeit at a lower resolution which is being stretched to fill the screen, making it look very blurry. I have installed the "Monitor Drivers" I found on the disk supplied with new monitor, but these do not appear to have made any difference. The Intel software that comes with the graphics card has an information window containing lots of info about the card and the monitor itself. I have placed this on a webpage so you can examine it if helpful. Many thanks with your help in getting my Christmas present to work! Patrick P.S.: Before I got this screen I checked to see if my graphics card could cope with such a large screen.

  Read the article

• Error when installing ubuntu-zfs

  - by ubiquibacon

  I'm switching from FreeNAS to Ubuntu 12.04 LTS. After a vanilla install of Ubuntu has been completed I run the following commands in the order shown to install ZFS: apt-get install python-software-properties add-apt-repository ppa:zfs-native/stable apt-get -y -q update && apt-get -y -q upgrade apt-get install ubuntu-zfs When the last command is run ZFS is installed and seems to be working correctly... mostly (more on that later). However, when the last command is run I get this error (full log here): configure: error: *** Please make sure the kmod spl devel <kernel> package for your *** distribution is installed then try again. If that fails you *** can specify the location of the spl objects with the *** '--with-spl-obj=PATH' option. What is this error and how do I fix it? Now I said mostly earlier because my pool's don't auto mount when the server restarts the way they should. All my reading (mostly from this page) indicates that mountall should just take care of the mounting. I have followed the instructions on that page and I cannot get mountall to work correctly. My pools will only auto mount on restart if I edit /etc/fstab or change the ZFS_MOUNT and ZFS_UNMOUNT options in /etc/default/zfs.

  Read the article

• Restore files from certain increments using Duplicity

  - by luckytaxi

  Given the following backup sets ... Found primary backup chain with matching signature chain: ------------------------- Chain start time: Tue Jun 21 11:27:26 2011 Chain end time: Tue Jun 21 11:27:59 2011 Number of contained backup sets: 2 Total number of contained volumes: 2 Type of backup set: Time: Num volumes: Full Tue Jun 21 11:27:26 2011 1 Incremental Tue Jun 21 11:27:59 2011 1 If i run the following command, it works (1308655646 was converted from Tue Jun 21 11:27:26 2011): duplicity --no-encryption --restore-time 1308655646 --file-to-restore ORIG_FILE \ file:///storage/test/ restored-file.txt However, if I run the following command, it restores the from the latest set. duplicity --no-encryption --restore-time 2011-06-21T11:27:26 --file-to-restore \ ORIG_FILE file:///storage/test/ restored-file.txt What am I doing wrong w/ the time? I prefer the second option only because I don't want to have to do the conversion manually.

  Read the article

< Previous Page | 456 457 458 459 460 461 462 463 464 465 466 467  | Next Page >