Search Results

Search found 18911 results on 757 pages for 'device manager'.

Page 464/757 | < Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >

• Is it common to have portable hard drive not recognize?

  - by lamwaiman1988

  I have a bad hard drive which could not be recognized by windows. If windows can recognize it, it could just be pure luck. There are better chance of it being recognize by plugging it at the usb back of the machine, rather than the front one. More interestingly, I have a usb cable which fork itself at one side ( i.e it has 2 heads at one side ). I can plug both heads to the machine and connect the portable hard drive on the other end of the usb cable? Can I get more voltage by doing this? I am guessing the front usb port doesn't have enough power. I am wondering if I buy a new portable usb hard drive, would it have easy read by plugging at the front usb port? I am not sure if I screw up the jumper connecting the front usb ports, but it is okay for other device such as usb stick and mouse.

  Read the article

• standard keyboard doesn't work, but hotkeys do.

  - by alureonissue

  I posted earlier, but I've learned more about the problem since. (windows xp sp3) AVAST found alureon in kbdclass.sys and atapi.sys. I quarantined both files and restarted. keyboard and cdrom weren't working. I uninstalled them in device manager and updated the drivers. That fixed the cdrom but not the keyboard. Oddly, the keyboard hotkeys work (the row of special keys across the top for calculator, windows explorer, mail, browser) but the standard keys do not. I uninstalled and reinstalled SP3 to no avail. Any advice? not sure if I should have reposted this but I thought the hotkeys working might be an important point left out in the first post. Sorry if I'm doing this wrong ;/

  Read the article

• How to dismiss the Windows 8.1 Upgrade banner?

  - by user81430

  As of today, my Windows 8 system is displaying a large banner covering about a quarter of the screen, demanding that I upgrade to Windows 8.1 for free. The banner helpfully informs me that that I can continue to use the computer while the upgrade is downloading. There's a button to go to the store for the upgrade, but no other choices, such as No Thanks, Maybe Later, or Absolutely Not. I can't find a way to dismiss the banner, and I can start programs but can't give them focus while the banner is present. So I'm dead in the water. How can I fix this? Bringing up Task Manager doesn't give me any options. My employer doesn't yet support Windows 8.1 (which is also an issue, but beyond my control) so I won't be able to connect to work if install the upgrade. So there is no way on God's green earth that I'm going to install this upgrade now.

  Read the article

• my windows xp sp3 diagnostick:windows could not detect any wired or wireless network cards installed on your machine

  - by Yosef

  Problem: cant connect to internet with my new installation of windows xp sp3. Details: I have ubuntu in pc that worked with wired internet. i format all disk and install windows xp sp3. i have auto internet that defined in my router - other computers have internet. I run diagnoze of ie and get: windows could not detect any wired or wireless network cards installed on your machine In Device Manager i have only 1394 Adapter I dont see any internet adapters. Edit: I find with ubuntu livecd that i have hardware:82566dc gigabit network connection Thanks

  Read the article

• Where does apache store initialization state for mod_proxy_balancer

  - by khoxsey

  I run apache2 on Ubuntu as a caching load-balancing reverse proxy in front of a group of application servers. I have noticed that the balancer maintains some state for some of the attributes visible in /balancer-manager such as whether an IP is enabled/disabled, load factor, etc. My site has periods of high (and low) usage, and recently as I added a new server to the working group I noticed that the load balancer picked up the new server but had it set to Disabled. I'm curious where that data is stored, and/or how it is initialized.

  Read the article

• Is it possible to install Canon EOS T3 Camera Drivers on Windows 7 Embedded

  - by Ryan Johnson

  I have a computer running Windows 7 Embedded. It's an embedded system that will be used in a industrial setting. It needs to be connected to a Canon EOS camera and download pictures from the camera. Other versions of windows come with the Canon drivers so Canon does not provide them as a download on their website. In the past, I had a similar issue with the "N" version of Microsoft Windows Starter and had to download the "Microsoft Media Feature Pack" which then installed the drivers. I attempted to install that on this device, but understandably it complains that its not applicable for this version of windows. So, is there there a feature pack or some other sort of download available that will install the camera drivers? Alternatively, is there some place to get the drivers and manually install them. Thanks in Advance, Ryan

  Read the article

• Is there a Windows 7 add-on that will put the PID in the title bar of a window?

  - by Chris

  Occasionally I run many instances of something, like Chrome or Visual Studio. Rarely, but often enough to bug me, one of them gets hosed and starts to consume 100% CPU. I can fire up the task manager to see which process is using 100%, but if it just says chrome.exe or devenv.exe, I don't know which window is the culprit. I'd like to know before terminating the process, so I can activate the app and shut it down cleanly. The best I've found so far is to use Process Explorer's feature where I can right click a process and say "bring to front". But I am curious as to whether there is an app that will put the PID(s) right in the title bar of the window so I can tell which window matches the process. I am using Windows 7 64-bit.

  Read the article

• How can I chainload a USB drive from GRUB2?

  - by magic.plane

  I'm using GNU GRUB version 1.99-12ubuntu5, booted over the network using PXE. I used grub-mknetdir to generate the GRUB image and directory tree, which I'm serving on a TFTP server using Tftpd32 in Windows. I've put the latest version of Clonezilla on my USB drive using Tuxboot. Right now, in GRUB's CLI, using ls lists only the (pxe) device, even if the USB drive is plugged in before the computer is on. Is there any way I can chainload Clonezilla on my USB from GRUB, which is booted over the network?

  Read the article

• Restoring factory image of HP Laptop

  - by Ahmed

  I use a HP G62. I am unable to use my recovery disk to restore to factory settings. I had no problems earlier until I created an additional partition which I hear might have changed my hard disk to dynamic. How do I get back to 'normal'? I don't mind formatting the disk. I just want my factory OS back. .............. i get an error message at about 69 percent telling me that the restoration process failed. I'm using the factory image disks i created using the hp recovery manager. I have tried formating the hard drive clean and then restoring woth the cd, it didn't work. I was always able to restore before i created that partition.

  Read the article

• iPhoto fails to see my new iPhone 3Gs

  - by Alexey Kulikov

  Two weeks ago I have bought the new iPhone 3Gs. It synced like charm with iTunes and I was happy until a couple of days ago when I noticed that there was absolutely no way I could get any photos from the phone to my mac, as it doesn't even appear in the device list. Long story short — i have even tried resetting Leopard completely from scratch (and formatting the HD beforehand). Still no joy. Leopard Snow 10.6.1 absolutely clean install with all updates iPhone 3Gs 3.1.2 - syncs like charm with iTunes, but NOT iPhoto Mac Book Air Any help will be greatly appreciated! update: It works with my old iphone, why can't the 3Gs work?

  Read the article

• SuSE always logs a user in TVM session

  - by rohan

  Hello all, Our sa recently installed Suse Linux enterprise Desktop 11 on my work box and I logged in first time into a GNOME session without any problems. Last time I logged in I selected the session as TWM and that got me into the T windows manager just fine. Now when I log out and try to log back into a GNOME session, it will still log me into the TVM session. I have tried restarting the box but that has not helped. Though when I remote log in to the machine it will let me get on the GNOME session just fine. I'm guessing this is probably a really simple fix, however I am a Linux newbie and doing a google search isn't yielding me what I'm looking for. My sa cant figure what is wrong either Thanks in advance for your help, Rohan

  Read the article

• SuSE always logs a user in TVM session

  - by rohan

  Hello all, I recently installed Suse Linux enterprise Desktop 11 on my box. I created an user and logged in first time into a GNOME session without any problems. Last time I logged in I selected the session as TWM and that got me into the T windows manager just fine. Now when I log out and try to log back into a GNOME session, it will still log me into the TVM session. I have tried restarting the box but that has not helped. However, when I remote log in to the machine it will let me got on the GNOME session just fine. I'm guessing this is probably a really simple fix, however I am a Linux newbie and doing a google search isn't yielding me what I'm looking for. Thanks in advance for your help, Rohan

  Read the article

• Restoring a Ubuntu Linux LVM drive

  - by user848106

  Scenario: I have a hard disk with a bootable sda1 partition and an Linux LVM. I seem to have corrupted the MBR? or Grub? not sure. I know it no longer boots and even with boot-repair and a Ubuntu live usb I was able to restore it. Following a "fix" with boot-repair I get "missing operating system" Can't i just reinstall grub or a new menu.lst? Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0007b68f Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 625141759 312320001 5 Extended /dev/sda5 501760 625141759 312320000 8e Linux LVM

  Read the article

• Hyper-Threading and Dual-Core, What's the Difference?

  - by Josh Stodola

  In a conversation with the network administator, I mentioned that my machine was a dual-core. He told me it was not. I brought up the task manager, went to the perfomance tab, and showed him that there are two separate CPU usage graphs. I have a quad-core machine at home and it has four graphs. He told there were two graphs on this particular machine because of hyper-threading. I used to have a hyper-thread pentium 4 processor back in the day, but I never fully understood what it meant. So what is the difference between hyper threading and dual-core? And how do you tell which one you have?

  Read the article

• ibm 8305-29u Sound comes from internal speaker instead of green port - Ubuntu 10.04 LTS

  - by TecBrat

  The title pretty much says it all. My experience w/ubuntu is VERY limited. I did find the system test feature and ran an audio test. It found my device as Intel 82801DB-ICH4. I wasn't getting anything. I tried a couple of things and don't really even remember what I tried, but I started getting audio (not just beeps) from the system's internal speaker. Any ideas? (I can't rule out a hardware problem. This box sat under my bed for a couple of years and it's first life was in an environment FULL of cement dust.)H

  Read the article

• zfs rename/move root filesystem into child

  - by Anton

  Similar question exists but the solution (using mv) is awful because in this case it works as "copy, then remove" rather than pure "move". So, I created a pool: zpool create tank /dev/loop0 and rsynced my data from another storage in there directly so that my data is now in /tank. zfs list NAME USED AVAIL REFER MOUNTPOINT tank 591G 2.10T 591G /tank Now I've realized that I need my data to be in a child filesystem, not in /tank filesystem directly. So how do I move or rename the existing root filesystem so that it becomes a child within the pool? Simple rename won't work: zfs rename tank tank/mydata cannot rename to 'tank/mydata': datasets must be within same pool (Btw, why does it complain the datasets are not within same pool when if fact I only have one pool?) I know there are solutions that involve copying all the data (mv, or sending the whole dataset to another device and back), but shouldn't there be a simple elegant way? Just noting that I do not care of snapshots at this stage (there are none yet to care of).

  Read the article

• Missing Items from Start Menu

  - by ChrisHDog

  I used to be able to search/open items from my start menu, but recently items have gone "missing". Example: I used to be able to hit the start menu, type "iis" and the top item would be iis manager and I could open and run ... now I get a list of items that are not IIS The same is true with typing "servi" - previously i would get Services (i.e. open local services), now it isn't showing I've checked the properties on Customise Start Menu for "Search other files and libraries" and it is selected as "Search without public folders" ... is there something else that is happening? It seems like something has changed, but I can determine what/how to revert to what it was.

  Read the article

• Keep only "lock" a single app open in iOS?

  - by CT.

  Is there anyway to "lock" open a single app in iOS? My use case for this is simple. There are many apps and games designed for children. While these applications are appropriate for children, many other applications installed on an iPad are not. But even more so than protecting them from inappropriate content, I would just like to prevent them from leaving the application. They accidentally hit the home button or multi-touch gesture out of the application. I know you can turn gestures off. Developers also have links to their website or other related applications. Kids are constantly exiting the application and then bringing the device to me asking "Can you get me back into the game?" every couple minutes. How can I hand a child an iPad with "Angry Birds" running and make sure only "Angry Birds" runs? Cydia or jailbreak tweaks welcome. Thanks.

  Read the article

• PEN daemon as load balancer, IIS web logs not showing true requester IPs

  - by Aszurom

  I have a Hercules vmware appliance, which is a micro-linux vm that runs the PEN daemon and acts as a server load-balancer. It takes any incoming request on the appliance's IP and routes it out to a number of alternate IPs. The logs of the daemon show the true IP of the browsers hitting the website. The logs of the websites themselves (iis 6 and 7) only show the requester IP as being that of the load balancer. The IT manager tells me that when we had a hardware appliance (serveriron XL) doing the load balancing, the web logs reflected the requester IPs accurately. Is there any way to get this resolved with the daemon, or will I be digging that out of the closet and plugging it back in?

  Read the article

• How can I get 32-bit Direct3D working on my 64-bit Windows 7 system?

  - by Daniel Stutzbach

  I recently upgraded a Dell Inspiron 6400 to Windows 7 Ultimate 64-bit. I have a 32-bit 3D application that refuses to run, giving an error of "Failed to initialise [sic] Direct3D device". The dxdiag tool tells me: DirectDraw Acceleration: Enabled Direct3D Acceleration: Not Available However, the 64-bit version of dxdiag tells me: DirectDraw Acceleration: Enabled Direct3D: Enabled I have installed and re-installed the latest graphics drivers, as well as the DirectX 9 redistributable, but it stills fails in the same way. dxdiag reports the chipset name as the "Mobile Intel(R) 945 Express Chipset Family" with the the Chip Type as "Intel(R) GMA 950". The main driver is igdumd64.dll, version 8.15.10.1930. How can I get 32-bit Direct3D working?

  Read the article

• Windows 8 will only recognize the Blu Ray ROM, if the install disk is present at boot time

  - by aceinthehole

  If I have the install disk in the blu ray ROM drive at boot time and subsequently remove the disk and replace it with blu ray media everything functions as I'd expect. However, if I have no media present, or another disk in the drive at boot time, then windows 8 does not seem to recognize that the blu ray player is even present in the computer. It is not present in the 'my computer' screen, device manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expect, what is it about having the windows 8 install disk in the drive or not that would cause this kind of behavior?

  Read the article

• Is Windows XP Pro not a good Hyper-V guest citizen?

  - by Magnus

  On my Windows Server 2008 R2 w. the Hyper-V role, I have these guest VMs: 3 x Windows Server 2008 R2 2 x Windows Server 2003 x86 2 x Windows 7 x64 1 x Windows XP Pro x86 In general, all machines are very fast and responsive. However, the Windows XP Pro guest is very sluggish. It can take up to 2 minutes to connect to the console/or a RD session. Sometimes it can "go into sleep" for several minutes. I have tried to add a 2nd CPU and more memory, but it doesn't help. When the issue happens, it's more or less impossible to get a responsive Task Manager up to analyze which process is hogging the CPU. But I have noticed that it can be various processes; lsass.exe, crss.exe etc. Integration Services is installed. Microsoft Security Essentials is installed, but I have tried without it, no difference. Any ideas?

  Read the article

• How to crash a program

  - by user2949019

  I have a program called BlueCoat Proxy installed on my school issued laptop that basically blocks every second website on the Internet, including stack exchange, YouTube and yahoo answers. I do not have administrator rights, nor can I delete anything in program files, I tried every possible method of obtaining admin rights. It is not accessible in task manager (it doesn't even appear there). I tried to close it with Windows command prompt through commands like 'taskkill' but it returns 'Access is Denied' (I'm only denied access with that program). Does anyone know a method of crashing a program with a batch file or VB program? I was thinking something like the ping command, though for a program. Maybe automating 1000 meaningless requests to the program? Your input on the subject matter is appreciated, however telling me that this is wrong or illegal is not.

  Read the article

• Errors reported by "powercfg -energy"

  - by Tim

  Running "powercfg -energy" under Windows 7 command line, I received a report with following three errors: System Availability Requests:Away Mode Request The program has made a request to enable Away Mode. Requesting Process \Device\HarddiskVolume2\Program Files\Windows Media Player\wmpnetwk.exe CPU Utilization:Processor utilization is high The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization. Average Utilization (%) 49.25 Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility with the hardware in this computer. I was wondering for the first error, what does "enable away mode" mean? for the second, what utilization percentage of CPU is reasonable? for the third, what is "PCI Express Active-State Power Management (ASPM)"? How I can correct the three errors? Thanks and regards!

  Read the article

• How to use new disk space after extend attached SAN disk

  - by Edu Lomeli

  I have extended the space of my SAN vDisk from 1TB to 1.2TB, but Windows Explorer doesn't show the new size. After resize the vdisk in the SAN Manager, the Disk Management utility shows the 200GB unallocated space, then I resized the partition to use the unallocated space to get a 1.2TB partition, the process was succesfully, but in the Windows File Explorer the disk still have 1TB of total space. Win version: Windows Storage Server Enterprise 2007. Do I need to restart the server? How can I use the new extra space without rebooting?

  Read the article

< Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >