Search Results

Search found 18911 results on 757 pages for 'device manager'.

Page 460/757 | < Previous Page | 456 457 458 459 460 461 462 463 464 465 466 467  | Next Page >

• Juniper Networks SRX240 as a office router?

  - by Jordan Mendelson

  We're a small (7 person) fast growing startup who just got our new office and we're having a 100 Mbps line installed from Cogent. I'm not familiar with Juniper devices, however the equivalent Cisco appears to be rather expensive. Features we'd like: Offsite VPN access (PPTP or L2TP IPsec) - something Mac compatible IPv6 support NAT - ideally supporting multiple outside addresses mapped to VLANs DHCP DNS forwarding would be nice QoS to keep our SIP phones happy (managed through RingCentral) VLANs for guest/internal The device is going to be connected to a set of SIP phones as well as two Ruckus 7962s for wireless access. Eventually I'd like to connect it to a Juniper ESX switch as we grow. Would a Juniper SRX240 handle this ok?

  Read the article

• Converting text file to epub?

  - by jamesh

  I have a bunch of book length text files I'd really like to read on my EPUB reader (as it happens FBReaderJ). What would be the best route to convert them? I have access to OSX and Linux (Ubuntu). Probably happiest with a command line, but would setting for a GUI for batch conversion. My criteria for success are really based upon the shortfalls I have found with Calibre must do the whole book at least a guess of what the title/author may be. Minimum the source filename for the title. hygienic with files it uses - tidies up after itself (this is less important) doesn't try to be an all-in-one library manager (again, less important). is lenient in parsing special characters (e.g. < and & characters).

  Read the article

• Wicd not playing well with networks that utilize network access control

  - by Sion

  Starting a couple months ago (might be able to find exact date if necessary) my installation of Wicd stopped being able to see wireless networks that use NAC (Network Access Control) such as Aruba networks. But if I shut down Wicd and start NetworkManager I can connect to said networks and log in to them depending on what the NAC requires. This is the current wicd package installed: net-misc/wicd-1.7.1_pre20111210-r1 This is how I manipulate the network manager running: su -c'/etc/init.d/wicd stop; /etc/init.d/NetworkManager start' What would cause this specific of a problem to occur?

  Read the article

• Bonjour/DNS Service Discovery queries

  - by senloe

  I'm trying to implement dns service discovery in my application (no, I'm not asking for a programmatic answer). What I believe is one of my big pain points is generating the query. I know I need to send out a multicast broadcast on port 5353 and want to look for devices of type _ipp._tcp and _print._tcp, but I don't know what the question section needs to look like. For example, in SSDP I sent out a query that looks like the following: "M-SEARCH * HTTP/1.1\r\n" "HOST: 239.255.255.250:1900\r\n" + "MAN: \"ssdp:discover\"\r\n" "ST: urn:schemas-upnp-org:device:Printer:1\r\n" "MX: 5000\r\n\r\n" From what I know about a DNS query I need to send something like: "_ipp.tcp,all,all" but I know there needs to be more. Any pointers to documentation, etc would be greatly appreciated! update rfc1035 appears to contain promising information re the message structure.

  Read the article

• Wi-Fi performance in Windows 8 RP on a MacBook Air (mid 2011)

  - by Steven Lu

  I was able to install the Boot Camp Windows software using the executable that it provided, and there are no unrecognized or unknown devices in Device Manager. Wi-Fi works but it seems to be limited to an extremely slow 1.5Mbits. Network Center reports an 802.11n connection (at 65Mbps usually) but transfers never reach above about 200kB/s. Being limited to 1/20th of the connection speed of my internet service is quite frustrating. Does anybody experience the same issue? I have been trying to identify the Broadcom Wi-Fi chipset and a driver that I could try to upgrade to but I have made very little progress on Google on this front.

  Read the article

• How do I use wine's new multi-channel audio support?

  - by Forest

  Wine supposedly added Multi-channel support to the ALSA driver in a recent release. However, I haven't found any documentation about it or any reports of anyone successfully using it. I have 5.1 surround sound through ALSA (not Pulse) on my linux system, yet games in wine don't seem to use anything more than stereo, no matter which ALSA device I select in winecfg. Can someone explain what must be done to get wine games to use all my speakers for positional audio, or failing that, point me toward some useful documentation on the new multi-channel support?

  Read the article

• Fastest way to move files from a guest VM to the host?

  - by iTayb

  Hey there. I'm looking for the fastest way to copy files from a VM to physical servers. Setting up a network between them isn't a thing I'd like to do. I believe it is much more secure when not having one. VMware suggests using the Copy-VMGuestFile cmdlet from their PowerCLI interface, however I find it slow (Running at approximately 1.5MB/s). I thought of the following: Creating a new virtual hard drive, moving the files in, and download the .vmdk file from the server, then extracting it locally. It is possible, however will not work with working VMs, and I don't want to shut-down the VM every time I want to move files. Use the virtual floppy device and download the .flp file. It works even if the VM is running, but it is limited to 2.8MB. Do I have any other way? I'm using ESXi 4.1. Thanks.

  Read the article

• Windows 7 won't boot from raid-1 disks until secondary non-bootable disks are removed

  - by PaulP

  I have an ASUS X58 motherboard with a Intel ICH10R southbridge raid controller. Bootable raid-1 SATA disks are on channels 4, 5. Secondary raid-1 SATA disks are on channels 0,1. Everything was working OK until one time I removed the secondary disks and booted successfully but after I shut down and reinstalled the secondary disks rebooting fails with a "Please insert proper boot item" error. If I remove the secondary disks and reboot then do a hot-install of the disks after booting completes, then all is OK. Do I have a raid setup problem or is it something I can fix with Disk Manager.

  Read the article

• HD Video Capture Card w/ Good API?

  - by Sheep Slapper

  Does anyone here know of a good HD video capture card that has a good (comprehensive) API? I administer a few servers that do some video encoding right now, but when we make the switch to HD cameras, they won't be sufficient. In addition to this, the servers we have now are black boxes, closed to me except to start/stop the video capture device. I'd like to be able to roll my own, so we can better integrate it with our existing systems, but I know almost nothing about what kind of HD capture cards are out there, and if I can avoid spending money just to test their APIs that would rock. So does anyone have any experience with this? All our other software is in C#, and I'd like to set up the new servers with web interfaces to start/stop the capture (also in C#, using .NET 3.5 probably). I'm not sure how language specific these APIs would be, but that's what I'm working with just as a reference point. I appreciate any help the community can give!

  Read the article

• Delay between printing via lp in opensuse

  - by adamweeks

  I am experiencing a 10-15 second delay when printing multiple documents to a barcode printer in opensuse. I have had the same setup on other systems with older versions of opensuse without any issue. The setup is as follows: The print queue is setup as a "generic with driver Raw Queue". The files being sent down to the printers are simple text files with the lp command: lp -dprinter1 /path/file The printer is a JetDirect compatible device (Intermec brand) with a standard 9100 port socket setup. If I send a multi-page document to the printer, it will print nonstop the multiple pages. If I send 2 or more text files down via separate "lp" commands, the delay will be there between each printout. I've tried multiple different printers and they all experience the same issue.

  Read the article

• Enable automatic driver install in Windows XP

  - by Peter

  When Windows detects new hardware (be it graphic card or USB Peripheral) it automatically installs driver and if it can't find a driver it shows "Found New hardware wizard" that allows you to manually select a driver. My problem is that this "Found New hardware wizard" shows up every time when I plug a new device and I have to click Next Next Next.. until it finishes installation. It's just like in Windows 98 ;) I want to fix it to the way it's supposed to be. It's got nothing to do with "Windows Update" and "Driver Signing" settings in "System properties - Hardware" tab, those are on default settings. Here is the same problem I have, but those replies ale completely useless

  Read the article

• How would I add a second physical hard drive to proxmox

  - by Cygnus X

  I installed proxmox on a single 250GB hard drive and I would like to add a second identical hard drive to put more VM's on. I already tried once, and didn't get very far. I added it and formatted it as an ext4, but when I went to use the disk, it said only 8GB was available. That's not quite right. So I did some searching and found that I had to make the device ID 8e for a linux lvm. After I did this, it said I had to restart, so I did... and it wouldn't boot!!! What did I do wrong? And how do I do it right? (I know I could throw in a RAID card and do a RAID 0, but I'd rather not).

  Read the article

• How can I get data off of a Corsair SSD?

  - by user1870398

  My Corsair SSD won't work and I have some critical data on it that I didn't back up (I needed to create a copy of my mechanical storage device, just forgot). The drive isn't detected by the OS or BIOS. I also tried it on another system, but all that happened was the OS failed to load (my guess was that it knew the drive was there, just couldn't read it). I tried powering it on without the data cable for a bit of time to see if it'd work again, but it didn't. Any ideas of how I can get the data off of this drive without having to send it in?

  Read the article

• External Hard-Drive Randomly Ejects; Stays On

  - by Kaleb F.

  My 250GB I/O Magic USB external hard-drive randomly disconnects / ejects from the computer after between 2-30 minutes of use. When this happens, the blinking activity light on the front of the hdd turns off; however, the disks can still be heard spinning. Unplugging & replugging in the USB does not reconnect the device and the activity light remains unlit. The only way to continue using it is to flip off then on the power switch of the hdd. The hard-drive was formatted with MBR partition table and 2 NTFS volumes. I recently tried switching to GUID with two Mac OS Extended (Journaled), but the problem remains. This error occurs with my new Macbook Pro with Snow Leopard as well as with my DELL E520 with Windows 7 Ultimate.

  Read the article

• Network bottleneck/throttling issue

  - by Gavin

  Hi all, It's my first day at a new company and i've been given the task to find out an issue with the internet connection. I noticed that whilst I was downloading a large file, the network grinds to a halt, except for my download. At first I thought it was the internet connection/modem but it seems that whilst the lockdown occurs, I am unable to access any network device. Has anyone experienced this before and if so, do you have any pointers? Looking at the setup. They have an DSL modem that connects to a 10/100 switch. There are only 5-6 computers on the network. Cheers Gavin

  Read the article

• IIS will not install on Windows 7 Pro 64 bit

  - by Paul

  I have a new PC running Windows 7 Professional 64 bit. I have an issue installing IIS - it goes through the install process, but at the end tells me "not all components could be installed", with no additional information given. There is no sign of an error in the install log or in event viewer. However, at this point, IIS is installed and working! I can run IIS manager, browse to localhost and see the default page, but at the next reboot the system rolls back and th einstall vanishes. I have tried installing II using the Windows Components section in Add/Remove Programs, I have also tried the Web Platform Installer and using the command line, all with the same end result.

  Read the article

• Setup kickstart boot for all installation media types (cd and usb-flash)

  - by Cucumber

  I created own custom CentOS iso. I used mkisofs make it. This is part of my isolinux.cfg file: label vesa menu label Install ^RAIDIX system kernel vmlinuz append initrd=initrd.img xdriver=vesa nomodeset text linux ks=cdrom:/isolinux/ks.cfg If I specify parameter ks=cdrom:/isolinux/ks.cfg my iso will boot only from cd or dvd-rom. If I specify parameter ks=hd:<device>:/ks.cfg my iso will boot only from usb-drive. Can I specify ks parameter to boot from both type of installation media?

  Read the article

• Session timeout is very short on IIS 7.5

  - by Mehdi Mousavi

  I have a website on windows server 2008 and iis 7 on a VPS. It works fine and has no problems, but after moving it to a shared hosting server with IIS 7.5, the session is lost after 4 or 5 clicks (like 30 secs) and I have to login again and again. The two sites are same, I copied the site from the VPS exactly as-is to the shared hosting server. The session timeouts in both web.config files are same. On the shared hosting server I don't have access to IIS manager to manipulate the settings. All I have is Plesk Control Panel 9.5 and the website's web.config file. What could be causing this to happen?

  Read the article

• How to add new partition to RAID-1 array on Redhat FC10?

  - by Peter Scott

  I have a RH FC10 system with RAID 1 partitions, here is mdadm.conf: # mdadm.conf written out by anaconda DEVICE partitions MAILADDR root ARRAY /dev/md1 level=raid1 num-devices=2 metadata=0.90 UUID=9588bfe1:ddfd5858:1067c814:ac499922 ARRAY /dev/md3 level=raid1 num-devices=2 metadata=0.90 UUID=3895ca46:c1526588:d48acd7e:c153aa83 ARRAY /dev/md4 level=raid1 num-devices=2 metadata=0.90 UUID=ebd4920f:b46c1f18:2eced24a:a21ca861 ARRAY /dev/md2 level=raid1 num-devices=2 metadata=0.90 UUID=048e8198:5d6d9682:d3a1e5c3:d475ad80 ARRAY /dev/md0 level=raid1 num-devices=2 metadata=0.90 UUID=d89ec2de:079d4be5:e00ee8f5:fcb19188 I want to carve off 500MB from md4 to make a new partition (for an AFS cache). I haven't touched mdadm or any other disk partitioning tools in years. md4 is 50GB and less than 10% used. What's the easiest way of doing this?

  Read the article

• Generating Thermal Printer (Zebra Printer) Sized PDFs for FedEx Labels

  - by Michael Hart

  Background I own a company which does a lot of FedEx Ground shipping. We have a 3rd party fulfillment center, which stores some of our inventory and at our request ships it. Zebra/Thermal printers are the most cost effective shipping label printers available and our 3rd party fulfillment center has one. I want to generate the labels locally then e-mail the 3rd party fulfillment center a PDF of the labels which they can then print out on their printer. Problem The trouble is, I can't seem to figure out how to print these 4" x 6" labels to a PDF, as FedEx (both ship manager and fedex.com) uses javascript to detect what printer I have. Question What's a clever way to send my 3rd party fulfillment center a PDF (or equivalent) of our 4" x 6" zebra thermal printer labels so they can print them out without re-entering the data?

  Read the article

• win7 amd64 guest in kvm does not have sound

  - by davidshen84

  hi, my host system is gentoo amd64, guest system is win 7 amd64. the guest system can work, except it does not have sound. i start kvm with -soundhw ac97, QEMU_AUDIO_DRV='alsa', and after i get into the guest system, i can see a 'Multimedia Audio Controller' in the device manager. but win7 cannot find the driver for it. i searched the network for a long time, and i cannot find a driver for intel ac97 for win7 amd64. i also tried -soundhw sb16, es1370, none of them work. please help me fix this.

  Read the article

• Good HDMI splitter/switch solution

  - by Mehper C. Palavuzlar

  I have a full HD TV which has only 2 HDMI ports on it. Since I have more than 2 devices I connect to TV (e.g. laptop, game console, DVD player), it becomes uncomfortable to plug in and plug out HDMI cables every time I need to use the relevant device. I need a cheap solution to increase the number of my HDMI ports at least to 3. What type of splitter/switch do you recommend? Does the quality of splitter matter, or do they all produce the same audio & video quality?

  Read the article

• Resize underlying partitions in mdadm RAID1

  - by kyork

  I have a home built NAS, and I need to slightly reconfigure some of my drive usage. I have an mdadm RAID1 composed of two 3TB drives. Each drive has one ext3 partition that uses the entire drive. I need to shrink the ext3 partition on both drives, and add a second 8GB or so ext3 partition to one, and swap partition of equal size to the other. I think I have the steps figured out, but wanted some confirmation. Resize the mdadm RAID resize2fs /dev/md0 [size] where size is a little larger than the currently used space on the drive Remove one of the drives from the RAID mdadm /dev/md0 --fail /dev/sda1 Resize the removed drive with parted Add the new partition to the drive with parted Restore the drive to the RAID mdadm -a /dev/md0 /dev/sda1 Repeat 2-5 for the other device Resize the RAID to use the full partition mdadm --grow /dev/md0 -z max Is there anything I've missed, or haven't considered?

  Read the article

• Securing data sent to an unencrypted WiFi AP

  - by David Parunakian

  The business plan of a project I'm involved in assumes selling certain WiFi-enabled devices to end users. All these devices originally have an unencrypted connection and a standard SSID. The problem is that although the user can connect to it and set both a new SSID and a WPA passphrase, these are being sent to the AP in plain text and thus can be intercepted by anyone nearby with a sniffer. What's the best solution to this problem, and why? Initially set up an encrypted wireless network at the device and supply the user with a printed passphrase Buy an SSL certificate for the AP's default IP address or local domain name (the APs aren't supposed to work as a router and have a captive portal & dnsmasq installed, so all of them can pretend to be myunit.example.com, as far as I understand) Something different Thank you.

  Read the article

• IT lead does not have a backup, DR plan in writing

  - by Alex

  This is a general management question to IT managers out there. We are a small firm with about 4 servers in our colo cabinent. No full time IT manager. But we do have one person on monthly contract and I am having a terrible time getting him to share what these plans actually are. I am sure he HAS a plan (and its probably in his head..) but that does us no good if he gets hit by a bus.. How would you guys handle this? He is a long time friend, but I fear this is dangerous for us long term..I have confronted him on several occasions about this, and he tells me not to worry, he has go it covered.. Thanks.

  Read the article

< Previous Page | 456 457 458 459 460 461 462 463 464 465 466 467  | Next Page >