Search Results

Search found 39047 results on 1562 pages for 'process control'.

Page 464/1562 | < Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >

• apache2 force proxy for specific url on a subdomain

  - by Tony G.

  Hi, I have a site that has dynamic virtual subdomains using mod_rewrite, as defined like this: <VirtualHost *:80> ServerName example.com ServerAlias *.example.com DocumentRoot /var/www/example.com/www RewriteEngine on RewriteCond %{HTTP_HOST} ^[^.]+\.examle.com$ RewriteRule ^(.+) %{HTTP_HOST}$1 [C] RewriteRule ^([^.]+)\.example.com(.*) /var/www/example.com/$1$2 </VirtualHost> The problem is that I want a specific url, say subdomain.example.com/CONTROL/ to point back to www.example.com/ using a proxy (not url redirecting). I have tried adding: RewriteRule ^([^.]+)\.example.com/CONTROL(.*) /var/www/example.com/www$2 [P] But that didn't work. Any ideas?

  Read the article

• Transfer used ram to swap and free more physical ram

  - by AbuOmar

  I have a vps with 256m physical ram and 512m swap space, I am trying to use a software that need more than 256m and less than 512m ram, so it uses swap. The problem is at some moment of the installation, the installation process checks the available physical ram, it's full (some swap is used), so it pauses the installation and tills that it must be some more ram to continue the installation.. I see that I need to move some of used physical ram to swap while the process is running.. Is there anyway I can do that? or any other solution! For sorry I am using openvz vps, and the vm.swappiness option can't be modified as a solution.

  Read the article

• Grub install fails while installing Ubuntu on RAID

  - by Warren Pena

  I'm trying to install Ubuntu 9.10 using the alternate install CD, but I keep getting stuck. I get through the first few steps of the install process easily enough (telling it what partition to install to, what user ID and password to create, time zone, etc.), but then it suddenly pops up a menu asking me what the next step in the install process is. It has "Install the GRUB boot loader on a hard disk" selected by default. When I select it, it goes to another screen with a progress bar and a label "Installing the 'grub2' package." The progress bar gets to 16%, and then I get returned to the same menu. No matter how many times I try to install grub, the exact same thing happens. I'm trying to install Ubuntu on a two disk RAID-1 array. This is the RAID card I'm using: http://www.siig.com/ViewProduct.aspx?pn=SC-SAER12-S2. Any ideas what may be causing this to happen and how I can fix it? Thanks!

  Read the article

• Nginx location issue

  - by dave

  I'm trying to set a longer (30 day) 'expires' header for my (images only) in the /misc-stuff/ directory. This is what I'm using for my site : # Serve static files directly from nginx location ~* \.(jpg|jpeg|gif|png|bmp|ico|pdf|flv|swf|exe|html|htm|txt|css|js) { add_header Cache-Control public; add_header Cache-Control must-revalidate; expires 7d; } I want to be able to keep that code in to handle regular site images, but create a new block to handle the /misc-stuff/ directory. I have tried : location ^~ /misc-stuff/ { ... } The problem I'm having now is that my backup .php files in that directory show up as plain text if someone tries to access it. How do I set it up so ONLY .gif images in the /misc-stuff/ directory are effected?

  Read the article

• No icons in top panel notification area

  - by PeterOakland

  (writing here because my reply to a previous post is marked "deleted by diago") Ubuntu 9.10 Karmic I have tried removing the notification area from the top panel and reinstalling it, and still I have nothing in it: no volume control, no connection icon. I have put a notification area on the bottom panel, and the only icon appearing is the connection one, looks like two plugs meeting, or a large resistor in line, or two toilet plungers face to face, so to speak. How can I get this up top where it used to be, along with the volume control icon? Thanks for any help.

  Read the article

• How to correctly add daemon in MacOS 10.6.6 via launchd?

  - by Eye of Hell

  Hello. I have a very simple task to accomplish: to start tomcat application server on latest MacOS as a daemon. I have performed following steps: Installed Tomcat in /Library/Tomcat/Home Validated that it runs fine by executed /Library/Tomcat/Home/bin/startup.sh Added org.apache.tomcat.plist file to /Library/LaunchDaemons as found on internet (http://blog.i18n.ro/complete-guide-for-installing-hudson-ci-on-os-x-10-6/) Instructed MacOS to load a daemon description via sudo launchctl load org.apache.tomcat.plist. It succeeded (issuing this command second time outputs "already loaded"). Instructed MacOS to start a daeon via sudo launchctl start org.apache.tomcat.plist At this point MacOS shows an error "launchctl start error: No such process". I have checked the logfile for launchd - it have no record for this error. Google says nothing. And from error text i can't figure out what is the "process" and why it is "wrong" :(. Any hints what i'm doing wrong?

  Read the article

• How to remove the hint in the terminal?

  - by jiangchengwu

  As a normal user , when I run some command like ps\netstat, the terminal hint me: (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) I know could redirect STDERR to /dev/null can remove this hint. But I want to know is there any way to remove it , such as edit some configuration files ? [deploy@storage2 ~]$ ps -V (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) procps version 3.2.7 [deploy@storage2 ~]$ ps -V 2>/dev/null procps version 3.2.7 My OS info: [deploy@storage2 ~]$ uname -a Linux storage2 2.6.18-243.el5 #1 SMP Mon Feb 7 18:47:27 EST 2011 x86_64 x86_64 x86_64 GNU/Linux [deploy@storage2 ~]$ lsb_release LSB Version: :core-3.1-amd64:core-3.1-ia32:core-3.1-noarch:graphics-3.1-amd64:graphics-3.1-ia32:graphics-3.1-noarch [deploy@storage2 ~]$ netstat -V (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) net-tools 1.60 netstat 1.42 (2001-04-15) Fred Baumgarten, Alan Cox, Bernd Eckenfels, Phil Blundell, Tuan Hoang and others +NEW_ADDRT +RTF_IRTT +RTF_REJECT +FW_MASQUERADE +I18N AF: (inet) +UNIX +INET +INET6 +IPX +AX25 +NETROM +X25 +ATALK +ECONET +ROSE HW: +ETHER +ARC +SLIP +PPP +TUNNEL +TR +AX25 +NETROM +X25 +FR +ROSE +ASH +SIT +FDDI +HIPPI +HDLC/LAPB There are more info from strace: [deploy@storage2 ~]$ strace ps -V execve("/bin/ps", ["ps", "-V"], [/* 27 vars */]) = 0 brk(0) = 0x929a000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=99752, ...}) = 0 mmap2(NULL, 99752, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7fde000 close(3) = 0 open("/lib/libnsl.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \241\210\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=101404, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fdd000 mmap2(0x887000, 92104, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x887000 mmap2(0x89a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x12) = 0x89a000 mmap2(0x89c000, 6088, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x89c000 close(3) = 0 open("/lib/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0Pzt\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=16428, ...}) = 0 mmap2(0x747000, 12408, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x747000 mmap2(0x749000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x749000 close(3) = 0 open("/lib/libm.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\204p\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=208352, ...}) = 0 mmap2(0x705000, 155760, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x705000 mmap2(0x72a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x24) = 0x72a000 close(3) = 0 open("/lib/libcrypt.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340\246q\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=45288, ...}) = 0 mmap2(0x71a000, 201020, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7fab000 mmap2(0xf7fb4000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0xfffffffff7fb4000 mmap2(0xf7fb6000, 155964, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fb6000 close(3) = 0 open("/lib/libutil.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \n\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=13420, ...}) = 0 mmap2(NULL, 12428, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7fa7000 mmap2(0xf7fa9000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0xfffffffff7fa9000 close(3) = 0 open("/lib/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@(s\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=129716, ...}) = 0 mmap2(0x72e000, 90596, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x72e000 mmap2(0x741000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13) = 0x741000 mmap2(0x743000, 4580, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x743000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340?]\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1611564, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fa6000 mmap2(0x5be000, 1328580, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x5be000 mmap2(0x6fd000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13f) = 0x6fd000 mmap2(0x700000, 9668, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x700000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fa5000 set_thread_area(0xffd61bb4) = 0 mprotect(0x6fd000, 8192, PROT_READ) = 0 mprotect(0x741000, 4096, PROT_READ) = 0 mprotect(0xf7fa9000, 4096, PROT_READ) = 0 mprotect(0xf7fb4000, 4096, PROT_READ) = 0 mprotect(0x72a000, 4096, PROT_READ) = 0 mprotect(0x749000, 4096, PROT_READ) = 0 mprotect(0x89a000, 4096, PROT_READ) = 0 mprotect(0x5ba000, 4096, PROT_READ) = 0 munmap(0xf7fde000, 99752) = 0 set_tid_address(0xf7fa5708) = 20214 set_robust_list(0xf7fa5710, 0xc) = 0 futex(0xffd61f74, FUTEX_WAKE_PRIVATE, 1) = 0 rt_sigaction(SIGRTMIN, {0x4007323d0, [], 0}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0x10000004007322e0, [], 0}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=-4284481536, rlim_max=67108864*1024}) = 0 uname({sys="Linux", node="storage2", ...}) = 0 readlink("/proc/self/exe", "/bin/ps"..., 260) = 7 brk(0) = 0x929a000 brk(0x92bb000) = 0x92bb000 open("/bin/ps", O_RDONLY|O_LARGEFILE) = 3 _llseek(3, -12, [711660], SEEK_END) = 0 read(3, "\274U!\253\2\0\0\0\224\237\t\0", 12) = 12 mmap2(NULL, 634880, PROT_READ, MAP_SHARED, 3, 0x13) = 0xfffffffff7f0a000 mmap2(NULL, 630784, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7e70000 close(3) = 0 futex(0x74a06c, FUTEX_WAKE_PRIVATE, 2147483647) = 0 geteuid32() = 501 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/nsswitch.conf", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1696, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7ff6000 read(3, "#\n# /etc/nsswitch.conf\n#\n# An ex"..., 4096) = 1696 read(3, "", 4096) = 0 close(3) = 0 munmap(0xf7ff6000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=99752, ...}) = 0 mmap2(NULL, 99752, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7fde000 close(3) = 0 open("/lib/libnss_files.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\30\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=46680, ...}) = 0 mmap2(NULL, 41616, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7e65000 mmap2(0xf7e6e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0xfffffffff7e6e000 close(3) = 0 mprotect(0xf7e6e000, 4096, PROT_READ) = 0 munmap(0xf7fde000, 99752) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=2166, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7ff6000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2166 close(3) = 0 munmap(0xf7ff6000, 4096) = 0 mkdir("/tmp/pdk-deploy/", 0755) = -1 EEXIST (File exists) mkdir("/tmp/pdk-deploy/fcb734befe617ec3ae1edc38da810a5a", 0755) = -1 EEXIST (File exists) open("/tmp/pdk-deploy/fcb734befe617ec3ae1edc38da810a5a/libperl.so", O_RDONLY|O_LARGEFILE) = 3 close(3) = 0 open("/tmp/pdk-deploy/fcb734befe617ec3ae1edc38da810a5a/libperl.so", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300!\2\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0664, st_size=1264090, ...}) = 0 mmap2(NULL, 1140104, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7d4e000 mmap2(0xf7e5a000, 45056, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x10b) = 0xfffffffff7e5a000 close(3) = 0 rt_sigaction(SIGFPE, {0x1000000000000001, [], SA_RESTORER|SA_STACK|SA_RESTART|SA_INTERRUPT|SA_NODEFER|SA_RESETHAND|SA_SIGINFO|0x3d61cb8, (nil)}, {SIG_DFL, ~[HUP INT ILL ABRT BUS SEGV USR2 PIPE ALRM TERM STOP TSTP TTIN TTOU XCPU WINCH IO PWR SYS RTMIN RT_1 RT_2 RT_4 RT_5 RT_8 RT_9 RT_11 RT_12 RT_13 RT_16 RT_17 RT_18 RT_22 RT_24 RT_25 RT_26 RT_27 RT_28 RT_29 RT_30 RT_31], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 getuid32() = 501 geteuid32() = 501 getgid32() = 502 getegid32() = 502 open("/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=56454896, ...}) = 0 mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7b4e000 mmap2(NULL, 241664, PROT_READ, MAP_PRIVATE, 3, 0x13ec) = 0xfffffffff7b13000 mmap2(NULL, 4096, PROT_READ, MAP_PRIVATE, 3, 0x1466) = 0xfffffffff7b12000 close(3) = 0 mmap2(NULL, 135168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7af1000 time(NULL) = 1348210009 readlink("/proc/self/exe", "/bin/ps"..., 4095) = 7 ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 _llseek(0, 0, 0xffd618d0, SEEK_CUR) = -1 ESPIPE (Illegal seek) ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd618a8) = -1 EINVAL (Invalid argument) _llseek(1, 0, 0xffd618d0, SEEK_CUR) = -1 ESPIPE (Illegal seek) ioctl(2, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd618a8) = -1 EINVAL (Invalid argument) _llseek(2, 0, 0xffd618d0, SEEK_CUR) = -1 ESPIPE (Illegal seek) open("/dev/null", O_RDONLY|O_LARGEFILE) = 3 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61978) = -1 ENOTTY (Inappropriate ioctl for device) _llseek(3, 0, [0], SEEK_CUR) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 rt_sigaction(SIGCHLD, NULL, {SIG_DFL, [], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 brk(0x92dc000) = 0x92dc000 getppid() = 20212 stat64("/opt/ActivePerl-5.8/site/lib/sitecustomize.pl", 0xffd61560) = -1 ENOENT (No such file or directory) close(3) = 0 open("/usr/lib/.khostd/.hostconf", O_RDONLY|O_LARGEFILE) = 3 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61828) = -1 ENOTTY (Inappropriate ioctl for device) _llseek(3, 0, [0], SEEK_CUR) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=334, ...}) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 read(3, "bindport=9001\ntrustip=221.122.57"..., 4096) = 334 read(3, "", 4096) = 0 close(3) = 0 pipe([3, 4]) = 0 pipe([5, 6]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0) = 20215 close(6) = 0 close(4) = 0 read(5, "", 4) = 0 close(5) = 0 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61868) = -1 EINVAL (Invalid argument) _llseek(3, 0, 0xffd61890, SEEK_CUR) = -1 ESPIPE (Illegal seek) fstat64(3, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0 read(3, (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) "tcp 0 0 0.0.0.0:9001"..., 4096) = 109 read(3, "", 4096) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- fstat64(3, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0 close(3) = 0 rt_sigaction(SIGHUP, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 rt_sigaction(SIGINT, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, [TRAP BUS FPE USR1 CHLD CONT TTOU VTALRM IO RTMIN], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], 0}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 waitpid(20215, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 20215 rt_sigaction(SIGHUP, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL, [TRAP BUS FPE USR1 CHLD CONT TTOU VTALRM IO RTMIN], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 chdir("/usr/lib/.khostd") = 0 pipe([3, 4]) = 0 pipe([5, 6]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0) = 20218 close(6) = 0 close(4) = 0 read(5, "", 4) = 0 close(5) = 0 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61868) = -1 EINVAL (Invalid argument) _llseek(3, 0, 0xffd61890, SEEK_CUR) = -1 ESPIPE (Illegal seek) read(3, "", 4096) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- close(3) = 0 rt_sigaction(SIGHUP, {0x1, [], SA_RESTORER|SA_STACK|SA_RESTART|SA_INTERRUPT|SA_NODEFER|SA_RESETHAND|0x3d61850, (nil)}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGINT, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], 0}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 waitpid(20218, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 20218 rt_sigaction(SIGHUP, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 chdir("/home/deploy") = 0 stat64("/etc/cron.hourly/hichina", {st_mode=S_IFREG|0755, st_size=711660, ...}) = 0 pipe([3, 4]) = 0 pipe([5, 6]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0) = 20230 close(6) = 0 close(4) = 0 read(5, "", 4) = 0 close(5) = 0 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61868) = -1 EINVAL (Invalid argument) _llseek(3, 0, 0xffd61890, SEEK_CUR) = -1 ESPIPE (Illegal seek) read(3, "procps version 3.2.7\n", 4096) = 21 read(3, "", 4096) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- close(3) = 0 rt_sigaction(SIGHUP, {0x1, [], SA_RESTORER|SA_STACK|SA_RESTART|SA_INTERRUPT|SA_NODEFER|SA_RESETHAND|0x3d61850, (nil)}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGINT, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], 0}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 waitpid(20230, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 20230 rt_sigaction(SIGHUP, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 write(1, "procps version 3.2.7\n", 21procps version 3.2.7 ) = 21 munmap(0xf7af1000, 135168) = 0 munmap(0xf7e70000, 630784) = 0 munmap(0xf7f0a000, 634880) = 0 munmap(0xf7d4e000, 1140104) = 0 exit_group(0) = ? [ Process PID=20214 runs in 32 bit mode. ] Thank you very much.

  Read the article

• Setting Timeouts: SQL Server 2008/IIS 7.5

  - by Julie

  We have recently migrated from a Win 2003/SQL Server 2000 system to Win 2008 64 bit R2, SQL Server 2008 R2. Our websites are in classic asp, and this can't be changed to another scripting language at this time. On the old server, if I got stuck in some kind of endless loop, the page would throw an error. On the new server, I have a page that has some sort of looping problem, that even though the SQL SP is called only once (and runs fine run as a query on the server) it pegs SQL server and therefore locks all of our websites. I'll get my code figured out, no biggie. But I need to make sure the server times out when this happens. (The page I'm working on runs fine with certain instances of the query, and locks with others using a different query variable. I can't have something like that sneak up on me on a page I haven't touched for three years.) I can't figure out how an SP that runs once on the server, from an ASP page, is tying up SQL server this way. It's obviously some sort of a timeout issue, but I can't figure out where/which timeout values to change. I actually have to remote desktop to the server and kill the process in SQL server. I'm afraid I'm a generalist, and server management is not my thing, even though it's my responsibility, so I am almost certain to have questions about any answer that I receive. How can I track this down? What settings do I need to change? More info: It's not SQL Server On our test site, I created an ASP file that just did an endless loop (do while 1=1) and had the same problem - the other websites wouldn't load - without SQL server being involved. So I think the reason the process was hanging is that the page wasn't timing out as it should, and so the connection to SQL was never closed. Killing the process in SQL server would reset the page somehow. For my intentional endless loop, I had to refresh the app pool to get rid of it. This points more to either IIS or the ASP settings. The ASP timeouts are set to whatever the default were when the server was first loaded. I still can't figure out why one file is locking up all websites, though. Again, that didn't happen on the old server.

  Read the article

• How to avoid general names for abstract classes?

  - by djechlin

  In general it's good to avoid words like "handle" or "process" as part of routine names and class names, unless you are dealing with (e.g.) file handles or (e.g.) unix processes. However abstract classes often don't really know what they're going to do with something besides, say, process it. In my current situation I have an "EmailProcessor" that logs into a user's inbox and processes messages from it. It's not really clear to me how to give this a more precise name, although I've noticed the following style matter arises: better to treat derived classes as clients and named the base class by the part of the functionality it implements? Gives it more meaning but will violate is-a. E.g. EmailAcquirer would be a reasonable name since it's acquiring for the derived class, but the derived class won't be acquiring for anyone. Or just really vague name since who knows what the derived classes will do. However "Processor" is still too general since it's doing many relevant operations, like logging in and using IMAP. Any way out of this dilemma? Problem is more evident for abstract methods, in which you can't really answer the question "what does this do?" because the answer is simply "whatever the client wants."

  Read the article

• Experience your music in a whole new way with Zune for PC

  - by Matthew Guay

  Tired of the standard Media Player look and feel, and want something new and innovative?  Zune offers a fresh, new way to enjoy your music, videos, pictures, and podcasts, whether or not you own a Zune device. Microsoft started out on a new multimedia experience for PCs and mobile devices with the launch of the Zune several years ago.  The Zune devices have been well received and noted for their innovative UI, and the Zune HD’s fluid interface is the foundation for the widely anticipated Windows Phone 7.  But regardless of whether or not you have a Zune Device, you can still use the exciting new UI and services directly from your PC.  Zune for Windows is a very nice media player that offers a music and video store and wide support for multimedia formats including those used in Apple products.  And if you enjoy listening to a wide variety of music, it also offers the Zune Pass which lets you stream an unlimited number of songs to your computer and download 10 songs for keeps per month for $14.99/month. Or you can do a pre-paid music card as well.  It does all this using the new Metro UI which beautifully shows information using text in a whole new way.  Here’s a quick look at setting up and using Zune on your PC. Getting Started Download the installer (link below), and run it to begin setup.  Please note that Zune offers a separate version for computers running the 64 bit version of Windows Vista or 7, so choose it if your computer is running these. Once your download is finished, run the installer to setup Zune on your computer.  Accept the EULA when prompted. If there are any updates available, they will automatically download and install during the setup.  So, if you’re installing Zune from a disk (for example, one packaged with a Zune device), you don’t have to worry if you have the latest version.  Zune will proceed to install on your computer.   It may prompt you to restart your computer after installation; click Restart Now so you can proceed with your Zune setup.  The reboot appears to be for Zune device support, and the program ran fine otherwise without rebooting, so you could possibly skip this step if you’re not using a Zune device.  However, to be on the safe side, go ahead and reboot. After rebooting, launch Zune.  It will play a cute introduction video on first launch; press skip if you don’t want to watch it. Zune will now ask you if you want to keep the default settings or change them.  Choose Start to keep the defaults, or Settings to customize to your wishes.  Do note that the default settings will set Zune as your default media player, so click Settings if you wish to change this. If you choose to change the default settings, you can change how Zune finds and stores media on your computer.  In Windows 7, Zune will by default use your Windows 7 Libraries to manage your media, and will in fact add a new Podcasts library to Windows 7. If your media is stored on another location, such as on a server, then you can add this to the Library.  Please note that this adds the location to your system-wide library, not just the Zune player. There’s one last step.  Enter three of your favorite artists, and Zune will add Smart DJ mixes to your Quickplay list based on these.  Some less famous or popular artists may not be recognized, so you may have to try another if your choice isn’t available.  Or, you can click Skip if you don’t want to do this right now. Welcome to Zune!  This is the default first page, QuickPlay, where you can easily access your pinned and new items.   If you have a Zune account, or would like to create a new one, click Sign In on the top. Creating a new account is quick and simple, and if you’re new to Zune, you can try out a 14 day trial of Zune Pass for free if you want. Zune allows you to share your listening habits and favorites with friends or the world, but you can turn this off or change it if you like. Using Zune for Windows To access your media, click the Collection link on the top left.  Zune will show all the media you already have stored on your computer, organized by artist and album. Right-click on any album, and you choose to have Zune find album art or do a variety of other tasks with the media.   When playing media, you can view it in several unique ways.  First, the default Mix view will show related tracks to the music you’re playing from Smart DJ.  You can either play these fully if you’re a Zune Pass subscriber, or otherwise you can play 30 second previews. Then, for many popular artists, Zune will change the player background to show pictures and information in a unique way while the music is playing.  The information may range from history about the artist to the popularity of the song being played.   Zune also works as a nice viewer for the pictures on your computer. Start a slideshow, and Zune will play your pictures with nice transition effects and music from your library. Zune Store The Zune Store offers a wide variety of music, TV shows, and videos for purchase.  If you’re a Zune Pass subscriber, you can listen to or download any song without purchasing it; otherwise, you can preview a 30 second clip first. Zune also offers a wide selection of Podcasts you can subscribe to for free. Using Zune for PC with a Zune Device If you have a Zune device attached to your computer, you can easily add media files to it by simply dragging them to the Zune device icon in the left corner.  In the future, this will also work with Windows Phone 7 devices. If you have a Zune HD, you can also download and add apps to your device. Here’s the detailed information window for the weather app.  Click Download to add it to your device.   Mini Mode The Zune player generally takes up a large portion of your screen, and is actually most impressive when run maximized.  However, if you’re simply wanting to enjoy your tunes while you’re using your computer, you can use the Mini mode to still view music info and control Zune in a smaller mode.  Click the Mini Player button near the window control buttons in the top right to activate it. Now Zune will take up much less of your desktop.  This window will stay on top of other windows so you can still easily view and control it. Zune will display an image of the artist if one is available, and this shows up in Mini mode more often than it does in the full mode. And, in Windows 7, you could simply minimize Zune as you can control it directly from the taskbar thumbnail preview.   Even more controls are available from Zune’s jumplist in Windows 7.  You can directly access your Quickplay links or choose to shuffle all music without leaving the taskbar. Settings Although Zune is designed to be used without confusing menus and settings, you can tweak the program to your liking from the settings panel.  Click Settings near the top left of the window. Here you can change file storage, types, burn, metadata, and many more settings.  You can also setup Zune to stream media to your XBOX 360 if you have one.   You can also customize Zune’s look with a variety of modern backgrounds and gradients. Conclusion If you’re ready for a fresh way to enjoy your media, Zune is designed for you.  It’s innovative UI definitely sets it apart from standard media players, and is very pleasing to use.  Zune is especially nice if your computer is using XP, Vista Home Basic, or 7 Starter as these versions of Windows don’t include Media Center.  Additionally, the mini player mode is a nice touch that brings a feature of Windows 7’s Media Player to XP and Vista.  Zune is definitely one of our favorite music apps.  Try it out, and get a fresh view of your music today! Link Download Zune for Windows Similar Articles Productive Geek Tips Redeem Pre-paid Zune Card Points for Zune Marketplace MediaUpdate Your Zune Player SoftwaredoubleTwist is an iTunes Alternative that Supports Several DevicesFind Free or Cheap Indie Music at Amie StreetAmie Street Downloader Makes Purchasing Music Easier TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC

  Read the article

• SOA Governance Starts with People and Processes

  - by Jyothi Swaroop

  While we all agree that SOA Governance is about People, Processes and Technology. Some experts are of the opinion that SOA Governance begins with People and Processes but needs to be empowered with technology to achieve the best results. Here's an interesting piece from David Linthicum on eBizq: In the world of SOA, the concept of SOA governance is getting a lot of attention. However, how SOA governance is defined and implemented really depends on the SOA governance vendor who just left the building within most enterprises. Indeed, confusion is a huge issue when considering SOA governance, and the core issues are more about the fundamentals of people and processes, and not about the technology. SOA governance is a concept used for activities related to exercising control over services in an SOA, including tracking the services, monitoring the service, and controlling changes made to the services, simple put. The trouble comes in when SOA governance vendors attempt to define SOA governance around their technology, all with different approaches to SOA governance. Thus, it's important that those building SOAs within the enterprise take a step back and understand what really need to support the concept of SOA governance. The value of SOA governance is pretty simple. Since services make up the foundation of an SOA, and are at their essence the behavior and information from existing systems externalized, it's critical to make sure that those accessing, creating, and changing services do so using a well controlled and orderly mechanism. Those of you, who already have governance in place, typically around enterprise architecture efforts, will be happy to know that SOA governance does not replace those processes, but becomes a mechanism within the larger enterprise governance concept. People and processes are first thing on the list to get under control before you begin to toss technology at this problem. This means establishing an understanding of SOA governance within the team members, including why it's important, who's involved, and the core processes that are to be follow to make SOA governance work. Indeed, when creating the core SOA governance strategy should really be independent of the technology. The technology will change over the years, but the core processes and discipline should be relatively durable over time.

  Read the article

• Exposing the ipPhone attribute to Communicator and the OCS address book service

  - by Doug Luxem

  I am in the process of integrating OCS with our Cisco phone system using CUCIMOC. After some fiddling with the phone normalization rules, it appears that I can get PSTN numbers to be dialed though the CUCIMOC interface (yay!). However, during this process I came to realize that the ipPhone attribute in Active Directory does not appear to be exposed to Communicator (and CUCIMOC). What is strange though, is that I can see from the OCS address book service "Invalid_AD_Phone_Numbers.txt" that the attribute is processed by the address book service. My question is, how do I expose the ipPhone field in Office Communicator? Currently, Communicator maps like this - Work = telephoneNumber Mobile = mobile Home = homePhone Attributes such as otherHomePhone, ipPhone, otherMobile, otherTelephone, otherIpPhone are ignored.

  Read the article

• Can't get Monit to work

  - by Andrea

  I am trying to configure Monit on my local machine to get a taste at how it works, but I have some issues. What I am trying to do is to get any evidence that Monit is up and running correctly and is actually monitoring something. So my /etc/monit/monitrc looks like set daemon 60 set logfile /var/log/monit.log set idfile /var/lib/monit/id set statefile /var/lib/monit/state set eventqueue basedir /var/lib/monit/events slots 100 set httpd port 2812 and allow username:password check process apache2 with pidfile /usr/local/apache/logs/apache2.pid start program = "/etc/init.d/apache2 start" stop program = "/etc/init.d/apache2 stop" if failed port 6543 protocol http then exec "/usr/bin/touch /tmp/monit" If I understand correctly, since apache does not listen on port 6543 (it is just a random number) I should get an error, and as a consequence the file /tmp/monit should be created. So I start monit by sudo service monit start sudo monit monitor apache2 Unfortunately no such file is created. Instead the web console shows an error for apache - execution failed. The log says 'apache2' failed to start. What am I doing wrong? EDIT As suggested in the comments, I ran monit in verbose mode, by monit -vv monitor apache2 (the exact command suggested in the comments failed). The output is Runtime constants: Control file = /etc/monit/monitrc Log file = /var/log/monit.log Pid file = /var/run/monit.pid Debug = True Log = True Use syslog = False Is Daemon = True Use process engine = True Poll time = 60 seconds with start delay 0 seconds Expect buffer = 256 bytes Event queue = base directory /var/lib/monit/events with 100 slots Mail from = (not defined) Mail subject = (not defined) Mail message = (not defined) Start monit httpd = True httpd bind address = Any/All httpd portnumber = 2812 httpd signature = True Use ssl encryption = False httpd auth. style = Basic Authentication The service list contains the following entries: Process Name = apache2 Pid file = /usr/local/apache/logs/apache2.pid Monitoring mode = active Start program = '/etc/init.d/apache2 start' timeout 30 second(s) Stop program = '/etc/init.d/apache2 stop' timeout 30 second(s) Existence = if does not exist 1 times within 1 cycle(s) then restart else if succeeded 1 times within 1 cycle(s) then alert Pid = if changed 1 times within 1 cycle(s) then alert Ppid = if changed 1 times within 1 cycle(s) then alert Port = if failed localhost:6543 [HTTP via TCP] with timeout 5 seconds 1 times within 1 cycle(s) then exec '/usr/bin/touch /tmp/prova-monit' timeout 0 cycle(s) else if succeeded 1 times within 1 cycle(s) then alert System Name = system_andrea-Vostro-420-Series Monitoring mode = active

  Read the article

• Apache Unclean shutdown of previous apache run

  - by Jakub Arnold

  I'm having problem with running Apache2.2 on my Vista machine. When I clean install Apache it works just fine, but after I installed PHP, I'm getting this error message in logs. [Fri Oct 23 21:29:02 2009] [warn] pid file C:/Dev/Apache2.2/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run? Apache service was stopped when installing PHP. I did only one shutdown before instalation via Apache Service Monitor. Deleting httpd.pid and starting again doesn't help. I even tried to lookup process with PID in that file, but there is no such process.

  Read the article

• hosting people asking for my account username and password to enable curl and socket function only for me

  - by Jayapal Chandran

  I have hosted my site in a shared environment. My hosting people disabled socket function all together. and they said that we can enable only for you if i given a written statement. I did but they asked for my control panel login details so they will run some kind of script to enable it. Is it right for the hosting company to ask for credentials. They have the total control so why cant they do it? Edit: Before six months many websites in their server got hacked. So they think it would be because of socket functions and had disabled it. They say they can enable it for specific users who do programming using that and that is by email request.

  Read the article

• How do i use storage spaces?

  - by Lucas

  I am planning on building a new windows 2012 server for a client and I have no experience in doing so. I have built many linux servers for them and setting up software raid during the install is a trivial matter. I have been unable to confirm that the windows 2012 install process has an analogous process for setting up Storage Spaces during the install. Can Storage Spaces be used as an installation target (configured during setup?) Is it capable of mirror+stripe (RAID10)? We have not ordered the hardware yet, so I'm looking for clarification.

  Read the article

• Linux: close a program with command line (not kill it)

  - by CodeNoob

  Some applications only allow one running instance (like eclipse, if you want to use the same workspace). So if I log in from another location, I have to kill/close the application that was open when I previously logged in from another location. I always use kill command to kill the running process. But, if you kill a process, it might not save some states that are useful for future usage. However, if you "close" it properly byclicking on the close button, for example, it will save the states properly. Is there a way to properly "close" an application from command line? I know this can vary from applications, so let's be a bit more generic: how to send a signal to another running application, and this signal works just as if we click the "close" button in the top bar? thanks!

  Read the article

• Promoting Organizational Visibility for SOA and SOA Governance Initiatives – Part I by Manuel Rosa and André Sampaio

  - by JuergenKress

  The costs of technology assets can become significant and the need to centralize, monitor and control the contribution of each technology asset becomes a paramount responsibility for many organizations. Through the implementation of various mechanisms, it is possible to obtain a holistic vision and develop synergies between different assets, empowering their re-utilization and analyzing the impact on the organization caused by IT changes. When the SOA domain is considered, the issue of governance should therefore always come into play. Although SOA governance is mandatory to achieve any measure of SOA success, its value still passes incognito in most organizations, mostly due to the lack of visibility and the detached view of the SOA initiatives. There are a number of problems that jeopardize the visibility of these initiatives: Understanding and measuring the value of SOA governance and its contribution – SOA governance tools are too technical and isolated from other systems. They are inadequate for anyone outside of the domain (Business Analyst, Project Managers, or even some Enterprise Architects), and are especially harsh at the CxO level. Lack of information exchange with the business, other operational areas and project management – It is not only a matter of lack of dialog but also the question of using a common vocabulary (textual or graphic) that is adequate for all the stakeholders. We need to generate information that can be useful for a wider scope of stakeholders like Business and enterprise architectures. In this article we describe how an organization can leverage from the existing best practices, and with the help of adequate exploration and communication tools, achieve and maintain the level of quality and visibility that is required for SOA and SOA governance initiatives. Introduction Understanding and implementing effective SOA governance has become a corporate imperative in order to ensure coherence and the attainment of the basic objectives of SOA initiatives: develop the correct services control costs and risks bound to the development process reduce time-to-market Read the full article here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: SOA Governance,Link Consulting,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• release management system - architectural question

  - by Sonic Soul

  Every place i've worked created their own release process, and all of them worked pretty well, however it took pretty good effort (and often a dedicated team) to manage releases. I am currently at a new place, and about to design such a system, however this time the team is very lean and we won't have dedicated resources to releasing. It will be up to development manager until the system is proofed enough for other developers to use. we're using Subversion as code repository, Team City as the build server, Jira issue tracker, Oracle db. I was thinking about writing a basic workflow app, that will let developers create a new manifest which will specify the following items. release details (who, jira issues etc) workflow step (dev, test, uat, prod approved, prod released) source files that last item is where it can get hairy. especially with database scripts. Figured I'd ask if there is a good pattern, or off the shelf product that could help with the database part, or perhaps the whole process. I briefly tested Red Gate Oracle deployment tool, but it didn't work out as well as I had hoped (from 1 day of testing at least) Questions: I think I could get around releasing of our code with something like Octopus Deploy straight from Team City. I am not clear however, how I could create a simple database deployment part, that will track which version of which script (from subversion) has been deployed where. Is there already some utility I could utilize for navigating subversion to choose which scripts should be released, instead of writing one from scratch. I'd just need it to produce some manifest of paths + versions.

  Read the article

• Is it possible to manually specify an alternative Procfile on Heroku?

  - by BillyBBone

  I have a repository which can be deployed in two modes: one is a front-end web application, while the other is a data manipulating process which runs non-stop, 24x7. The application runs on Django and connects to a Postgres database. For architectural reasons that I won't go into, I'd like to deploy the app in front-end mode inside as one Heroku application, and deploy the same app (i.e. the same git repo) in the data agent mode, as another Heroku application. Both applications will share the same Postgres connection string, and thus the data agent will feed the front-end app. Is it possible to maintain two separate Procfiles in one repo? This would cause the 3 appropriate dynos to start in front-end mode, and would spin up another process entirely in the other mode.

  Read the article

• Windows 7 laptop's volume with headphones way too loud

  - by jcao219

  I have two headphones, neither has any amps or volume control, and both have the same problem with this computer. I normally have the volume on 10%, and that is optimal. I'm still very afraid that someday it will be at 100% and i'll accidentally have my headphones on. I tested how loud it is at maximum volume -- it's earsplittingly loud! In fact, it's so loud that if I lay the headphones down on the table, I can listen to a song perfectly clearly from meters away. Is there any way to make the volume control more safe for the ears?

  Read the article

• How should code reviews be Carried Out?

  - by Graviton

  My previous question has to do with how to advance code reviews among the developers. Here I am interested in how a code review session should be carried out, so that both the reviewer and reviewed are feeling comfortable with it. I have done some code reviews before and the experience has been very unpleasant. My previous manager would come to us --on an ad hoc basis-- and tell us to explain our code to him. Since he wasn't very familiar with the code base, whenever he would ask me to explain my code, I'd find myself spending a huge amount of time explaining the most basic structure of my code. As a result, each review would last much too long, and the process would leave both of us exhausted. Once I was done explaining my work, he would continue by raising issues with it. Most of the issues he raised were cosmetic in nature ( e.g, don't use region for this code block, change the variable name from xxx to yyy even though the later makes even less sense, and so on). After trying this process for few rounds, we found the review session didn't derive much benefits for either of us, and we stopped. How would you go about making each code review a natural, enjoyable, thought stimulating, bug-fixing and mutual-learning experience? Also, how frequently you do your code reviews - as soon as the code is checked in? Do you allocate a fixed time every week to do this? What are the guidelines that you follow during your code reviews?

  Read the article

• In Windows 7 Home Premium, is it possible to grant a user account the "log on as a service" right and if so, how?

  - by Ryan Johnson

  The title says it all. I need to have the ability for a local user account to log on as a service on a computer running Windows 7 Home Premium. In Windows 7 Ultimate, this is accomplished by going to Control Panel - Administrative Tools - Local Security Policy and adding the user to the "Log on as a service" policy. In Home Premium, there is no Local Security Policy in the Control Panel. Is there another way to add the use to that policy (i.e. registry setting) or is my only recourse to upgrade the computer to Windows 7 Professional? Thanks in Advance, Ryan

  Read the article

• Announcing Unbreakable Enterprise Kernel Release 3 for Oracle Linux

  - by Lenz Grimmer

  We are excited to announce the general availability of the Unbreakable Enterprise Kernel Release 3 for Oracle Linux 6. The Unbreakable Enterprise Kernel Release 3 (UEK R3) is Oracle's third major supported release of its heavily tested and optimized Linux kernel for Oracle Linux 6 on the x86_64 architecture. UEK R3 is based on mainline Linux version 3.8.13. Some notable highlights of this release include: Inclusion of DTrace for Linux into the kernel (no longer a separate kernel image). DTrace for Linux now supports probes for user-space statically defined tracing (USDT) in programs that have been modified to include embedded static probe points Production support for Linux containers (LXC) which were previously released as a technology preview Btrfs file system improvements (subvolume-aware quota groups, cross-subvolume reflinks, btrfs send/receive to transfer file system snapshots or incremental differences, file hole punching, hot-replacing of failed disk devices, device statistics) Improved support for Control Groups (cgroups)  The ext4 file system can now store the content of a small file inside the inode (inline_data) TCP fast open (TFO) can speed up the opening of successive TCP connections between two endpoints FUSE file system performance improvements on NUMA systems Support for the Intel Ivy Bridge (IVB) processor family Integration of the OpenFabrics Enterprise Distribution (OFED) 2.0 stack, supporting a wide range of Infinband protocols including updates to Oracle's Reliable Datagram Sockets (RDS) Numerous driver updates in close coordination with our hardware partners UEK R3 uses the same versioning model as the mainline Linux kernel version. Unlike in UEK R2 (which identifies itself as version "2.6.39", even though it is based on mainline Linux 3.0.x), "uname" returns the actual version number (3.8.13). For further details on the new features, changes and any known issues, please consult the Release Notes. The Unbreakable Enterprise Kernel Release 3 and related packages can be installed using the yum package management tool on Oracle Linux 6 Update 4 or newer, both from the Unbreakable Linux Network (ULN) and our public yum server. Please follow the installation instructions in the Release Notes for a detailed description of the steps involved. The kernel source tree will also available via the git source code revision control system from https://oss.oracle.com/git/?p=linux-uek3-3.8.git If you would like to discuss your experiences with Oracle Linux and UEK R3, we look forward to your feedback on our public Oracle Linux Forum.

  Read the article

• Why is it that XCode cannot push my changes?

  - by Justin Case

  I am writing an iOS application in XCode. I associated a remote repository to it. I finished writing a View Controller file and then went to File - Source Control - Commit. I wrote a commit message. Oddly, every time I typed a space, an error popped up that read "1 of 2 files will be commited." I then tried to push the commit by clicking File - Source Control - Push. However, I get an error that notes that I have unsaved changes. Why? Didn't I just commit?

  Read the article

< Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >