Search Results

Search found 16435 results on 658 pages for 'portable applications'.

Page 466/658 | < Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >

  • Windows 7 Locks Up or Blue Screens after installing additional hard drive

    - by Ryan
    I've had my home theater pc for over a year now and it's been running with no problems what so ever. I got myself a new Seagate 2 TB hard drive for the holidays and ever since installing it the pc now randomly locks up or blue screens either upon putting it to sleep or waking it from sleep. The only thing I've tried so far is updating the firmware on the hard drive. The hard drive in question is this one (http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4846365). I do have my minidump file saved off on my home theater pc however right now I'm at work and don't have access to it. Please help! Thank you!

    Read the article

  • Making The EBS Upgrade From 11.5.10 Easier - Part III

    - by Annemarie Provisero
    ADVISOR WEBCAST: Making The EBS Upgrade From 11.5.10 Easier - Part III PRODUCT FAMILY: E-Business Suite July 19, 2011 at 8 am PT, 9 am MT, 11 am ET This one-hour session is recommended for technical users who are responsible for upgrading their E-Business Suite applications from Release 11.5.10 to Release 12.1.x. As you begin your upgrade process, there are a number of tools available to assist you in a successful upgrade. A successful upgrade requires careful planning, correct upgrade processing, detailed testing, and user (re)training prior to upgrade. Over three sessions we will discuss the tools that you can use to assist in your upgrade tasks. These tools are available to you via My Oracle Support and as part of the E-Business Suite product offerings. In this third session, we’ll cover the Best Practices for Using The Upgrade Tools. Additionally, this session includes an extended question and answer period. In the first part of the three-session series, we covered the following topics: Overview of Tools Available for Upgrading Upgrade versus Re-implementing Upgrade Community Upgrade Product Information Center Page Detailed Look at Upgrade Advisor In the second session, we covered the following topics: Recap of Part I Detailed Look at Maintenance Wizard Detailed Look at Patch Wizard A replay of those sessions is available via Note 740964.1, Advisor Webcast Archive. A short, live demonstration (only if applicable) and question and answer period will be included. Oracle Advisor Webcasts are dedicated to building your awareness around our products and services. This session does not replace offerings from Oracle Global Support Services. Click here to register for this session ------------------------------------------------------------------------------------------------------------- The above webcast is a service of the E-Business Suite Communities in My Oracle Support. For more information on other webcasts, please reference the Oracle Advisor Webcast Schedule.Click here to visit the E-Business Communities in My Oracle Support Note that all links require access to My Oracle Support.

    Read the article

  • Oracle OpenWorld Preview: JavaOne Social Developer Program

    - by kellsey.ruppel
    Originally posted by Jake Kuramoto on The Apps Lab blog. If you’re heading to San Francisco later this month for JavaOne and are interested in learning about building social applications for your enterprise, you should plan to check out the Social Developer Program, organized and hosted by Roland Smart http://twitter.com/rsmartx) who recently joined Oracle after the Involver acquisition. The program runs from 10 AM to 3:30 PM on Tuesday, October 2 at the San Francisco Hilton and features speakers from Oracle, Bit.ly, Facebook, LinkedIn, and Sociable Labs. The focus is on the emergence of social within the enterprise and ends with a hackathon. That last bit got your attention? Thought it might. Here’s the skinny: In this session the staff of the Oracle Social Developer Lab will present some social development tools that make integrating social functionality into your apps easier to achieve. This session kicks off a week-long hack to build an application using OSDL code. A winner will be selected and profiled in Java Magazine. I don’t have any more details on the prize, which is sure to be epic, so you’ll just have to attend the program. In the meantime, check out their Facebook page for more information. See you in San Francisco.

    Read the article

  • Oracle VM Server for x86 Training Schedule

    - by Antoinette O'Sullivan
    Learn about Oracle VM Server for x86 to see how you can accelerate enterprise application deployment and simplify lifecycle management with fully integrated support from physical to virtual servers including applications. Oracle offers a 3 day course Oracle VM Administration: Oracle VM Server for x86. This course  teaches you how to: Build a virtualization platform using the Oracle VM Manager and Oracle VM Server for x86. Deploy and manage highly configurable, inter-connected virtual machines. Install and configure Oracle VM Server for x86 as well as details of network and storage configuration, pool and repository creation, and virtual machine management. You can take this course as follows: Live Virtual Class - taking the course from your own desktop accessing a live teach by top Oracle instructors and accessing extensive hands-on exercises. No travel necessary. Over 300 events are current scheduled in many timezones across the world. See the full schedule by going to the Oracle University Portal and clicking on Virtualization. In Classroom - Events scheduled include those shown below:  Location  Date  Delivery Language  Warsaw, Poland  6 August 2012  Polish  Istanbul, Turkey  10 September 2012  Turkish  Dusseldorf, Germany  6 August 2012  German  Munich, Germany  10 September 2012  German  Paris, France  17 October 2012  French  Denver, Colorado, US  30 July 2012  English  Roseville, Minnesota, US  23 July 2012  English  Sydney, Australia  3 September  English For more information on this course and these events or to search for additional events or register your interest in an additional event/location, please visit the Oracle University Portal and click on Virtualization.

    Read the article

  • X Session from Mac

    - by tekknolagi
    How can I log into an X server from Mac OS X? I know that ssh -X username@host will log me in and I will have the capability to run X applications. On Cygwin/X you can log in and have a whole X session from your computer... and it will look something like this: How can I replicate this? Using this batch script: @echo off SET DISPLAY=127.0.0.1:0.0 SET REMOTE_HOST=%1 IF "%REMOTE_HOST%" == "" SET REMOTE_HOST=10.0.0.1 SET CYGWIN_ROOT=\cygwin SET RUN=%CYGWIN_ROOT%\bin\run -p /usr/bin SET PATH=.;%CYGWIN_ROOT%\bin;%PATH% SET XAPPLRESDIR= SET XCMSDB= SET XKEYSYMDB= SET XNLSPATH= if not exist %CYGWIN_ROOT%\tmp\.X11-unix\X0 goto CLEANUP-FINISH attrib -s %CYGWIN_ROOT%\tmp\.X11-unix\X0 del %CYGWIN_ROOT%\tmp\.X11-unix\X0 :CLEANUP-FINISH if exist %CYGWIN_ROOT%\tmp\.X11-unix rmdir %CYGWIN_ROOT%\tmp\.X11-unix if "%OS%" == "Windows_NT" goto OS_NT echo startxdmcp.bat - Starting on Windows 95/98/Me goto STARTUP :OS_NT REM Windows NT/2000/XP echo startxdmcp.bat - Starting on Windows NT/2000/XP :STARTUP %RUN% XWin -query tekknolagi.dyndns.org -clipboard -lesspointer -scrollbars -screen 0 1050x1655@2 -screen 1 1680x985@1

    Read the article

  • Fujitsu Raku-Raku SmartPhone: Japanese Digital Seniors UX Insight from @debralilley

    - by ultan o'broin
    Super blog posting on the super-important subject of digital inclusion by Oracle partner Fujitsu appstech maven and Oracle Applications User Experience FXA-er and ACE Director Debra Lilley (@debralilley). Debra tells us how Fujitsu is enabling digital inclusion for older mobile users in Japan with their  Raku-Raku (??????. ????)smart phone: Fujitsu Raku-Raku - My UX Homework (Raku-Raku means easy or comfortable in Japanese). There are UX mobile, social media, and methodology takeaways there for us in Debra's blog. Fujitsu Raku-Raku Smartphone Demo  I encourage you to read Debra's blog. In it, she makes reference to a tailored social media experience for those digital seniors (???????) as they'd be called in Japan (UK and Ireland uses the term silver surfers). You can find that online experience here. Online Community site for Fujitsu Raku-Raku Smartphone Digital Seniors (English translation via Google Translate) It's an important reminder that UX is global sure, but also that worldwide accessibility and digital inclusion are priorities too for UX. It's vital that we understand such aspects of technology adoption and how the requirements of different categories of technology users can be met. Oracle is committed to providing the best possible user experience for enterprise users of all ages and abilities. That means talking with all sorts of people worldwide and understanding how and why they want to use our technology and what their context of use is. You can read more about Oracle's accessibility program on our corporate website. Proud to say I prompted a few questions in Japan all the way from Ireland. So, UX is not only global but you can drive UX research globally too without ever leaving home. Brilliant job, Debra. Here's to more such joint research creativity and UX collaborations worldwide between us. Wondering where we might go next? And what a fun way to do things too!

    Read the article

  • Considering Embedding a Database? Choose MySQL!

    - by Bertrand Matthelié
    The M of the LAMP stack and the #1 database for Web-based applications, MySQL is also an extremely popular choice as embedded database. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Access our Resource Kit to discover the top reasons why:   3,000 ISVs and OEMs rely on MySQL as their embedded database 8 of the top 10 software vendors and hundreds of startups selected MySQL to power their cloud, on-premise and appliance-based offerings Leading mobile and SaaS providers ensure continuous service availability and scalability with lower cost and risk using MySQL Cluster. Learn how you can reduce costs and accelerate time to market while increasing performance and reliability. Access white papers, webinars, case studies and other resources in our Resource Kit.  

    Read the article

  • Effectiveness and Efficiency

    - by Daniel Moth
    In the professional environment, i.e. at work, I am always seeking personal growth and to be challenged. The result is that my assignments, my work list, my tasks, my goals, my commitments, my [insert whatever word resonates with you] keep growing (in scope and desired impact). Which in turn means I have to keep finding new ways to deliver more value, while not falling into the trap of working more hours. To do that I continuously evaluate both my effectiveness and my efficiency. EFFECTIVENESS The first thing I check is my effectiveness: Am I doing the right things? Am I focusing too much on unimportant things? Am I spending more time doing stuff that is important to my team/org/division/business/company, or am I spending it on stuff that is important to me and that I enjoy doing? Am I valuing activities that maybe I have outgrown and should be delegated to others who are at a stage I have surpassed (in Microsoft speak: is the work I am doing level appropriate or am I still operating at the previous level)? Notice how the answers to those questions change over time and due to certain events, so I have to remind myself to revisit them frequently. Events that force me to re-examine them are: change of role, change of team/org/etc, change of direction of team/org/etc, re-org, new hires on the team that take on some of the work I did, personal promotion, change of manager... and if none of those events has occurred since the last annual review, I ask myself those at each annual review anyway. If you think you are not being effective at work, make a list of the stuff that you do and start tracking where your time goes. In parallel, have a discussion with your manager about where they think your time should go. Ultimately your time is finite and hence it is your most precious investment, don't waste it. If your management doesn't value as highly what you spend your time on, then either convince your management, or stop spending your time on it, or find different management: Lead, Follow, or get out of the way! That's my view on effectiveness. You have to fix that before moving to being efficient, or you may end up being very efficient at stuff that nobody wants you to be doing in the first place. For example, you may be spending your time writing blog posts and becoming better and faster at it all the time. If your manager thinks that is not even part of your job description, you are wasting your time to satisfy your inner desires. Nobody can help you with your effectiveness other than your management chain and your management peers - they are the judges of it. EFFICIENCY The second thing I check is my efficiency: Am I doing things right? For me, doing things right means that I deliver the same quality of work faster [than what I used to, and than my peers, and than expected of me]. The result is that I can achieve more [than what I used to, and than my peers, and than expected of me]. Notice how the efficiency goal is a more portable one. If, by whatever criteria, you think you are the best at [insert your own skill here], this can change at two events: because you have new colleagues (who are potentially better than your older ones), and it can change with a change of manager (who has potentially higher expectations). That's about it. Once you are efficient at something, you carry that with you... All you need to really be doing here is, when taking on new kinds of work that you haven't done before, try a few approaches and devise a system so that you can become efficient at this new activity too... Just keep "collecting" stuff that you are efficient at. If you think you are not being efficient at something, break it down: What are the steps you take to complete that task? How long do you spend on each step? Talk to others about what steps they take, to see if you can optimize some steps away or trade them for better steps, or just learn how to complete a step faster. Have a system for every task you take so that you can have repeatable success. That's my view on efficiency. You have to fix it so that you can free up time to do more. When you plan a route from A to B - all else being equal - you try to get there as fast as possible so why would you not want to do that with your everyday work? For example, imagine you are inefficient at processing email: You spend more time than necessary dealing with email, and you still end up with dropped email threads and with slower response times than others. How can you improve? Talk to someone that you think is good at this, understand their system (e.g. here is my email processing system) and come up with one that works for you. Parting Thoughts Are you considered, by your colleagues and manager, an effective and efficient person at your workplace? If you are, what would you change if you were asked by your management to do the job of two people? Seriously, think about that! Your immediate reaction may be "that is not possible", but it actually is. You just have to re-assess what things that were previously important will now stop being important, by discussing them with your management and reaching agreement on relative priorities. For example, stuff that was previously on your plate may now have to be delegated or dropped. Where you thought you were efficient, maybe now you have to find an even faster path to completion, perhaps keeping in mind that Perfect is the Enemy of “Good Enough”. My personal experience (from both observing others and from my own reflection) is that when folks are struggling to keep up at work it is because of two reasons: They are investing energy in stuff that they enjoy doing which the business regards as having a lower priority than a lot of other things on their plate. They are completing tasks to a level of higher quality than what is required (due to personal pride) missing the big picture which almost always mandates completing three tasks at good enough quality than knocking only one of them out of the park while the other two come in late or not at all. There is a lot of content on the web, so I strongly encourage you to use your favorite search engine to read other views on effectiveness and efficiency (Bing, Google). Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Hot swapping for Linux web/database servers

    - by Art
    Is there a way to perform the following under Linux: There are two web servers, main and backup There are two database servers (postgres), main and backup Web Servers are in sync with each other, ie. configuration/content/applications are the same Backup database is continuously synced up with main database. If either of main servers goes down, it's being replaced with backup one on the fly. When main database server goes back up, all the data from backup server is uploaded to it. Essentially, I need the hot swapping working automatically with no or minimal user intervention, if possible. Recovery procedure is preferably automatic but can include some manual steps.

    Read the article

  • Server Cabinet/Room Cooling

    - by user37226
    Hello all. I currently have two desktops and three servers in my office sitting on the floor (I know this is bad). With that many servers the ambient temperature in the room goes up quickly. I am located in Dallas, TX so during the winter, if the heat is kept low, it is not a problem, but during the summer it easily jumps the room +10 degrees. I have decided and found a free 42U server cabinet that a hosting company was throwing away to house all of these systems in. One server is in a rack mount case while the other four servers are housed in mid-tower cases. I have purchased shelves for each computer and plan to lay the towers side ways on these shelves (as replacing the cases costs a heck of a lot of money). I like the idea of housing all of these systems in the cabinet because it will save a lot of room and clean up all of the cabling currently laying all over the office floor. When putting this setup together over the next couple of weeks, I want to address issues with dust and cooling. The server cabinet has a fan on top, front plexiglass door and a rear metal door with vent wholes on the bottom. First the cooling issues. I know I am going to want to have cool air enter the bottom of the cabinet and exit the top. I do not want the room heating up though as this will make my work area hot and then make the servers warmer as the air eventually reenters the cabinet. I had an idea to fix this problem, but am unsure if it will work. I was thinking of taking flexible piping and adapting it to the back fans of the computer having the other end of the pipe at the top close to the cabinet's top mounted fan. I was then thinking of creating a duct around the top fan into the attic. Now I am very concerned that the attic will cause issues with this type of setup because during July/August time frame, the attic is easily 120 degrees F. I could also use the flexible pipe to take it to an attic exhaust vent if it would be better to vent it into the 100 degree air outside (at least there may be wind. The other option would be to buy a small portable air conditioner. This may be a possibility, but do I want to spend the extra money on power? I bet this increases the noise. Plus they are around $250 on Amazon. What would you all recommend? Depending on the solution I end up running with above, I would also like to limit the dust that gets into the cabinet. If I were to cut a whole and mount a second cabinet fan on the bottom of the rear door, could I possibly mount a standard home air filter on the other side of that whole? Thanks in advance for your recommendations. I look forward to reading your interesting ideas.

    Read the article

  • Server Cabinet/Room Cooling

    - by user37226
    Hello all. I currently have two desktops and three servers in my office sitting on the floor (I know this is bad). With that many servers the ambient temperature in the room goes up quickly. I am located in Dallas, TX so during the winter, if the heat is kept low, it is not a problem, but during the summer it easily jumps the room +10 degrees. I have decided and found a free 42U server cabinet that a hosting company was throwing away to house all of these systems in. One server is in a rack mount case while the other four servers are housed in mid-tower cases. I have purchased shelves for each computer and plan to lay the towers side ways on these shelves (as replacing the cases costs a heck of a lot of money). I like the idea of housing all of these systems in the cabinet because it will save a lot of room and clean up all of the cabling currently laying all over the office floor. When putting this setup together over the next couple of weeks, I want to address issues with dust and cooling. The server cabinet has a fan on top, front plexiglass door and a rear metal door with vent wholes on the bottom. First the cooling issues. I know I am going to want to have cool air enter the bottom of the cabinet and exit the top. I do not want the room heating up though as this will make my work area hot and then make the servers warmer as the air eventually reenters the cabinet. I had an idea to fix this problem, but am unsure if it will work. I was thinking of taking flexible piping and adapting it to the back fans of the computer having the other end of the pipe at the top close to the cabinet's top mounted fan. I was then thinking of creating a duct around the top fan into the attic. Now I am very concerned that the attic will cause issues with this type of setup because during July/August time frame, the attic is easily 120 degrees F. I could also use the flexible pipe to take it to an attic exhaust vent if it would be better to vent it into the 100 degree air outside (at least there may be wind. The other option would be to buy a small portable air conditioner. This may be a possibility, but do I want to spend the extra money on power? I bet this increases the noise. Plus they are around $250 on Amazon. What would you all recommend? Depending on the solution I end up running with above, I would also like to limit the dust that gets into the cabinet. If I were to cut a whole and mount a second cabinet fan on the bottom of the rear door, could I possibly mount a standard home air filter on the other side of that whole? Thanks in advance for your recommendations. I look forward to reading your interesting ideas.

    Read the article

  • What options do I have for creating customized keyboard shortcuts?

    - by Moses
    As I am getting more heavily into programming as a job and no longer as a hobby, I am definitely in need of some ways to improve my productivity. One thing that would definitely help in that respect is being able to create customized keyboard shortcuts for text/code snippets. For instance, holding down CMD+L+O+R+E+M will output a paragraph or two of the Lorem ipsum filler text, or CMD+F+U creates a function declaration. What I am ideally looking for is a database where I can store formatted text snippets, bind them to my choice of keystrokes, and then have the text paste whenever I perform the associated keystrokes. Are there any stand-alone applications that can do this for a Mac. Also, are there any text editors / IDEs that have this ability built in?

    Read the article

  • StreamInsight Now Available Through Microsoft Update

    - by Roman Schindlauer
    We are pleased to announce that StreamInsight v1.1 is now available for automatic download and install via Microsoft Update globally. In order to enable agile deployment of StreamInsight solutions, you have asked of us a steady cadence of releases with incremental, but highly impactful features and product improvements. Following our StreamInsight 1.0 launch in Spring 2010, we offered StreamInsight 1.1 in Fall 2010 with implicit compatibility and an upgraded setup to support side by side installs. With this setup, your applications will automatically point to the latest runtime, but you still have the choice to point your application back to a 1.0 runtime if you choose to do so. As the next step, in order to enable timely delivery of our releases to you, we are pleased to announce the support for automatic download and install of StreamInsight 1.1 release via Microsoft Update starting this week. If you have a computer: that is subscribed to Microsoft Update (different from Windows Update) has StreamInsight 1.0 installed, and does not yet have StreamInsight 1.1 installed, Microsoft Update will automatically download and install the corresponding StreamInsight 1.1 update side by side with your existing StreamInsight 1.0 installation – across all supported 32-bit and 64-bit Windows operating systems, across 11 supported languages, and across StreamInsight client and server SKUs. This is also supported in WSUS environments, if all your updates are managed from a corporate server (please talk to the WSUS administrator in your enterprise). As an example, if you have SI Client 1.0 DEU and SI Server 1.0 ENU installed on the same computer, Microsoft Update will selectively download and side-by-side install just the SI Client 1.1 DEU and SI Server 1.1 ENU releases. Going forward, Microsoft Update will be our preferred mode of delivery – in addition to support for our download sites, and media based distribution where appropriate. Regards, The StreamInsight Team

    Read the article

  • Hyper-V Ubuntu 10.04, Filesystem suddenly becomes Read-Only?

    - by Daniel Upton
    We are running a Ubuntu 10.04 VM on a Hyper-V system, The VM is dedicated to running one of our web applications. We have enabled the Hyper-V drivers in /etc/initramfs-tools/modules like so: hv_vmbus hv_storvsc hv_blkvsc hv_netvsc And updated the kernel image like so: $ update-initramfs -u And all was good... until.. This morning i got a support request that our web application was throwing an error 500, so i checked the logs and nothing was there. Then I remembered that I had seen this on another of our ubuntu servers so I... $ touch foo.txt And my suspicions were confirmed: touch: cannot touch `foo.txt': Read-only file system Why is the filesystem randomly becoming readonly? Is this only in Ubuntu on HV? Is it a problem on RedHat or Cent?

    Read the article

  • C++ Numerical Recipes &ndash; A New Adventure!

    - by JoshReuben
    I am about to embark on a great journey – over the next 6 weeks I plan to read through C++ Numerical Recipes 3rd edition http://amzn.to/YtdpkS I'll be reading this with an eye to C++ AMP, thinking about implementing the suitable subset (non-recursive, additive, commutative) to run on the GPU. APIs supporting HPC, GPGPU or MapReduce are all useful – providing you have the ability to choose the correct algorithm to leverage on them. I really think this is the most fascinating area of programming – a lot more exciting than LOB CRUD !!! When you think about it , everything is a function – we categorize & we extrapolate. As abstractions get higher & less leaky, sooner or later information systems programming will become a non-programmer task – you will be using WYSIWYG designers to build: GUIs MVVM service mapping & virtualization workflows ORM Entity relations In the data source SharePoint / LightSwitch are not there yet, but every iteration gets closer. For information workers, managed code is a race to the bottom. As MS futures are a bit shaky right now, the provider agnostic nature & higher barriers of entry of both C++ & Numerical Analysis seem like a rational choice to me. Its also fascinating – stepping outside the box. This is not the first time I've delved into numerical analysis. 6 months ago I read Numerical methods with Applications, which can be found for free online: http://nm.mathforcollege.com/ 2 years ago I learned the .NET Extreme Optimization library www.extremeoptimization.com – not bad 2.5 years ago I read Schaums Numerical Analysis book http://amzn.to/V5yuLI - not an easy read, as topics jump back & forth across chapters: 3 years ago I read Practical Numerical Methods with C# http://amzn.to/V5yCL9 (which is a toy learning language for this kind of stuff) I also read through AI a Modern Approach 3rd edition END to END http://amzn.to/V5yQSp - this took me a few years but was the most rewarding experience. I'll post progress updates – see you on the other side !

    Read the article

  • How to host a scalable social networking app

    - by christopher-mccann
    I am in the middle of developing a social networking application for a very select user niche which could scale to a few million users. Right now I have always hosted applications on RackSpace Cloud and I have no issues with them at all - always been a really good service and never had any downtime. My question is though does anyone think that cloud computing is not the way to host scalable web apps? Or can anyone with experience of this recommend a better solution. I have always shunned trying to run big servers from my own facilities as I think it seems silly to go to the expense of bringing in big alternative power supplies and all the other necessary precautions when other companies already do this. I looked at managed hosting services but this proved to be a bit too expensive for us at the start and the scalability of it wasnt good enough - it would take a day or two to get a new server provisioned. Therefore I ended up on a cloud platform. If anyone has any recommendations or advice it would be greatly appreciated.

    Read the article

  • My control key doesn't work, how do I fix it??

    - by Blaine LaFreniere
    My control key on the right doesn't work how it should. E.g. Right ctrl + T won't open new tabs in firefox, right ctrl + w won't switch windows in vim, etc. I know the key isn't physically broken, because xev shows that the right ctrl key generates events, but it just isn't responding as I expect it to in applications. Screenshot: http://i46.tinypic.com/33w1h76.png I tried Kim's answer but it still doesn't work. blaine@blaine-laptop ~ $ xmodmap -pke | grep 105 keycode 105 = Control_R Control_R Control_R Control_R Control_R Tried to map as Control_L as well, didn't work. The computer is a laptop, I am unable to plug the keyboard in to another computer.

    Read the article

  • GF 3.0.1 + Virtual Server: www.myhost.com:8080/projectname-war => www.myhost.com. How?

    - by Harry Pham
    I need to change www.myhost.com:8080/myproject-war to www.myhost.com. This is what I try. In admin console in Glassfish 3.0.1, I create a http-listener-3 with port 9090 and address 0.0.0.0 (I want to have port 80, but got access-denied or some sort). I then create a virtual server call scholar, with Id=scholar, Hosts=${com.sun.aas.hostName}, Network Listeners: http-listener-3, Default Web Module=project#project-war.war(it is the only option from the drop down list since I only deploy 1 app). Then under Applications, I set the virtual server of the application to be scholar. Save and restart. I try localhost:9090, and expecting that it will load my project like as if I type localhost:9090/project-war. But it does not. I already set the Default Web Module, to be the project, why doesnt it load the project by default?

    Read the article

  • Engineered to Inform, Inspire, Entertain

    - by Oracle OpenWorld Blog Team
    by Karen Shamban Take note! Oracle OpenWorld keynote lineup announced  The lineup for the keynotes at this year's Oracle OpenWorld conference has just been announced.  Expert speakers will provide insights into industry trends, the latest technology developments and futures, as well as key strategies for achieving business efficiency and innovation. Critical business drivers such as engineered systems, cloud computing, customer experience, and business analytics and big data will be featured topics. Executive keynotes include: Oracle CEO Larry Ellison on "Hardware and Software, Engineered to Work Together: Why It's a Different Approach" and "The Oracle Cloud: Where Social is Built In" Oracle President Mark Hurd discussing "Shift Complexity" with SVP of Oracle Database Development Andrew Mendelsohn,  and "See More, Act Faster: Oracle Business Analytics" Oracle EVP of Product Development Thomas Kurian focusing on "The Oracle Cloud: Oracle's Cloud Platform and Applications Strategy" Oracle EVP of Systems John Fowler, Oracle Chief Corporate Architect Edward Screven, and Oracle SVP of Systems Technology Juan Loiaza on "Oracle Cloud Infrastructure and Engineered Systems: Fast, Reliable, Virtualized" For more information on speakers, topics, and schedule, go to the Oracle OpenWorld Keynotes page.

    Read the article

  • Reconciling vmware memory vs windows memory usage

    - by RyanW
    I have a Windows 2008 R2 64 bit virtual machine on ESXi 4.1 host. The host reports that the virtual machine is actively using less than 1 GB of memory. But, in Windows it's reporting the machine is using 7 GB of memory, even though the total of the processes listed in task manager is less than 1 GB. The machine is rather unresponsive and I'm concerned this is impacting other applications (server's purpose is to run ASP.NET state server process, which has been having trouble and led me to spot the memory question). I just noticed High memory usage Windows Server 2008r2 on VMware and will be looking through those documents more, but what is causing this?

    Read the article

  • Trying to test Domain Collapsing / Consoldiation validity for SEO purposes

    - by Roy Rico
    At work, we're trying to determine the effectiveness of domain collapsing for SEO purposes. Our current structure is to have multiple web apps served from different servers, such as PUBLIC URLS - directly accessed by users www1.somecompany.com/webapp1 www2.somecompany.com/webapp2 www3.somecompany.com/webapp3 I'm proposing to put an Apache proxy in front of these applications that will mask the different domains and route the requests to proper server PUBLIC URL--------routed/forwarded to-----PRIVATE URL www.somecompany.com/webapp1 <-----> www1.somecompany.com/webapp1 www.somecompany.com/webapp2 <-----> www2.somecompany.com/webapp2 www.somecompany.com/webapp3 <-----> www3.somecompany.com/webapp3 In terms of SEO/page rank value, does this help?

    Read the article

  • How can I create profiles for the windows that are open on my Mac?

    - by Kyle Hayes
    As a semi-dual monitor user on my MacBook, I run into a particular issue that drives me nuts. The scenario is at work I run my MacBook Pro's display as the secondary monitor to a dual-monitor setup. I primarily use the secondary view for my social network windows (Adium, Tweetie, Gabbble, and IRC). I position exactly as I want them to see all at the same time. However, when I disconnect my MBP to go home and reconnect to my other monitor at home, all the applications were shifted onto the main screen (since that is where they went when I disconnected the monitor before I left). With this, I have to go through the whole process again to move and position them on the secondary screen again. Is there a utility or application that will allow me to create screen/window profiles that will basically memorize the current position of all the windows and persist it to be re-instantiated later?

    Read the article

  • Security issue on Linux with Netbeans

    - by WebDevHobo
    In order to edit some files in Netbeans, I had to do a chmod 777 on the parent-folder. Reason being that anything else would result in Netbeans not wanting to accept the folder, as it could not be written. Is there an other way to do this besides doing a chmod 777? I'm on Ubuntu 9.10, using Netbeans 6.7.1 And after that, I manually have to give each file the needed rights. There should be an easier way, I just don't know it. EDIT: I am running XAMPP and the files I'm trying to edit are in the htdocs folder. I'm running Netbeans as my local user account, which is how it starts if I have it run from the applications-menu.

    Read the article

  • Don't Miss All the OEPE Action at OOW and JavaOne

    - by Juan Camilo Ruiz
    This year at Oracle Open World the OEPE team will be participating in various activities along the week. Here is the summary of all them: mark your calendars and secure your spot, we'll be showing all the new and exciting that we have been working on. Sessions: Mon 1 Oct, 2012 Time Title Location 10:45 AM - 11:45 AM General Session: The Future of Development for Oracle Fusion—From Desktop to Mobile to Cloud Marriott Marquis - Salon 8 4:45 PM - 5:45 PM General Session: Building Mobile Applications with Oracle Cloud Moscone West - 2002/2004 3:15 PM - 4:15 PM End-to-End Oracle ADF Development in Eclipse Marriott Marquis - Golden Gate C3 Wed 3 Oct, 2012 Time Title Location 3:30 PM - 4:30 PM Oracle Developer Cloud Services Marriott Marquis - Salon 7 Hands-On Lab: Thur 4 Oct, 2012 Time Title Location 12:45 PM - 1:45 PM Oracle ADF for Java EE Developers with Oracle Enterprise Pack for Eclipse Marriott Marquis - Salon 3/4 Also you can see live demos throughout the week at our demo booths over in JavaOne and Moscone Center Demos Demo Location Cloud Developer Moscone North, Upper Lobby - N-002 Oracle Eclipse Projects Hilton San Francisco, Grand Ballroom - HHJ-008 Oracle Enterprise Pack for Eclipse Moscone South, Right - S-208 Also the OEPE team will be at the first ADF Developer Meetup at OOW, on Wednesday from 4.30 p.m - 5.30 p.m  at the OTN Lounge. Let's have a beer and let us know what you think about the product. See you in San Francisco! 

    Read the article

  • ArchBeat Link-o-Rama Top 10 for November 2, 2012

    - by Bob Rhubart
    ADF Mobile - Login Functionality | Andrejus Baranovskis "The new ADF Mobile approach with native deployment is cool when you want to access phone functionality (camera, email, sms and etc.), also when you want to build mobile applications with advanced UI, " reports Oracle ACE Director Andrejus Baranovskis. Big Data: Running out of Metric System | Andrew McAfee Do very large numbers make your brain hurt? Better stock up on aspirin. According to Andrew McAfee: "It seems safe to say that before the current decade is out we’ll need to convene a 20th conference to come up with some more prefixes for extraordinarily large quantities not to describe intergalactic distances or the amount of energy released by nuclear reactions, but to capture the amount of digital data in the world." Cloud computing will save us from the zombie apocalypse | Cloud Computing - InfoWorld "It's just a matter of time before we migrate our existing IT assets to public cloud systems," says InfoWorld cloud blogger David Linthicum. "Additionally, it's a short window until the dead rise from the grave and attempt to eat our brains." Is is Halloween or something? Thought for the Day "A computer lets you make more mistakes faster than any invention in human history—with the possible exceptions of hand guns and tequila." — Mitch Ratcliffe

    Read the article

< Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >