Search Results

Search found 56140 results on 2246 pages for 'super computer'.

Page 466/2246 | < Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >

• Port forwarding DD-WRT

  - by Pawel

  Hi, I'am runing locally service on port 81 (192.168.1.101) I would like to access server from outside MY.WAN.IP.ADDR:81. Everything is working fine on my local network, However can't access it from outside. Below iptables rules on the router. I am using dd-wrt and asus rt-n16 (everything is setup through standard port range forwarding in dd-wrt ) It might be something obvious, but I don't have any experience with routing. Any help will be really appreciated. Thanks. #iptables -t nat -vnL Chain PREROUTING (policy ACCEPT 1285 packets, 148K bytes) pkts bytes target prot opt in out source destination 3 252 DNAT icmp -- * * 0.0.0.0/0 MY.WAN.IP.ADDR to:192.168.1.1 5 300 DNAT tcp -- * * 0.0.0.0/0 MY.WAN.IP.ADDR tcp dpt:81 to:192.168.1.101 0 0 DNAT udp -- * * 0.0.0.0/0 MY.WAN.IP.ADDR udp dpt:81 to:192.168.1.101 298 39375 TRIGGER 0 -- * * 0.0.0.0/0 MY.WAN.IP.ADDR TRIGGER type:dnat match:0 relate:0 Chain POSTROUTING (policy ACCEPT 7 packets, 433 bytes) pkts bytes target prot opt in out source destination 747 91318 SNAT 0 -- * vlan2 0.0.0.0/0 0.0.0.0/0 to:MY.WAN.IP.ADDR 0 0 RETURN 0 -- * br0 0.0.0.0/0 0.0.0.0/0 PKTTYPE = broadcast Chain OUTPUT (policy ACCEPT 86 packets, 5673 bytes) pkts bytes target prot opt in out source destination # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination DROP tcp -- anywhere anywhere tcp dpt:webcache DROP tcp -- anywhere anywhere tcp dpt:www DROP tcp -- anywhere anywhere tcp dpt:https DROP tcp -- anywhere anywhere tcp dpt:69 DROP tcp -- anywhere anywhere tcp dpt:ssh DROP tcp -- anywhere anywhere tcp dpt:ssh DROP tcp -- anywhere anywhere tcp dpt:telnet DROP tcp -- anywhere anywhere tcp dpt:telnet Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT 0 -- anywhere anywhere TCPMSS tcp -- anywhere anywhere tcp flags:SYN,RST/SYN TCPMSS clamp to PMTU lan2wan 0 -- anywhere anywhere ACCEPT 0 -- anywhere anywhere state RELATED,ESTABLISHED logaccept tcp -- anywhere pawel-ubuntu tcp dpt:81 logaccept udp -- anywhere pawel-ubuntu udp dpt:81 TRIGGER 0 -- anywhere anywhere TRIGGER type:in match:0 relate:0 trigger_out 0 -- anywhere anywhere logaccept 0 -- anywhere anywhere state NEW Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain advgrp_1 (0 references) target prot opt source destination Chain advgrp_10 (0 references) target prot opt source destination Chain advgrp_2 (0 references) target prot opt source destination Chain advgrp_3 (0 references) target prot opt source destination Chain advgrp_4 (0 references) target prot opt source destination Chain advgrp_5 (0 references) target prot opt source destination Chain advgrp_6 (0 references) target prot opt source destination Chain advgrp_7 (0 references) target prot opt source destination Chain advgrp_8 (0 references) target prot opt source destination Chain advgrp_9 (0 references) target prot opt source destination Chain grp_1 (0 references) target prot opt source destination Chain grp_10 (0 references) target prot opt source destination Chain grp_2 (0 references) target prot opt source destination Chain grp_3 (0 references) target prot opt source destination Chain grp_4 (0 references) target prot opt source destination Chain grp_5 (0 references) target prot opt source destination Chain grp_6 (0 references) target prot opt source destination Chain grp_7 (0 references) target prot opt source destination Chain grp_8 (0 references) target prot opt source destination Chain grp_9 (0 references) target prot opt source destination Chain lan2wan (1 references) target prot opt source destination Chain logaccept (3 references) target prot opt source destination ACCEPT 0 -- anywhere anywhere Chain logdrop (0 references) target prot opt source destination DROP 0 -- anywhere anywhere Chain logreject (0 references) target prot opt source destination REJECT tcp -- anywhere anywhere tcp reject-with tcp-reset Chain trigger_out (1 references) target prot opt source destination #iptables -vnL FORWARD Chain FORWARD (policy ACCEPT 130 packets, 5327 bytes) pkts bytes target prot opt in out source destination 15 900 ACCEPT 0 -- br0 br0 0.0.0.0/0 0.0.0.0/0 390 20708 TCPMSS tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU 182K 130M lan2wan 0 -- * * 0.0.0.0/0 0.0.0.0/0 179K 129M ACCEPT 0 -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 logaccept tcp -- * * 0.0.0.0/0 192.168.1.101 tcp dpt:81 0 0 logaccept udp -- * * 0.0.0.0/0 192.168.1.101 udp dpt:81 0 0 TRIGGER 0 -- vlan2 br0 0.0.0.0/0 0.0.0.0/0 TRIGGER type:in match:0 relate:0 2612 768K trigger_out 0 -- br0 * 0.0.0.0/0 0.0.0.0/0 2482 762K logaccept 0 -- br0 * 0.0.0.0/0 0.0.0.0/0 state NEW

  Read the article

• Can't boot flash drive on GIGABYTE motherboard

  - by Deltik

  Situation When I try to boot from my flash drive, my GIGABYTE 970A-UD3 motherboard returns this: Loading Operating System ... Boot error All other motherboards I've tried support booting from that flash drive (and a backup flash drive). The operating systems I tried on both flash drives were created with usb-creator-gtk (Ubuntu USB Startup Disk Creator). I know that the motherboard understands that there is an operating system on the flash drives because when I erase them, it complains in an ALL CAPS RAGE that there isn't an operating system, which is correct. How can I boot a flash drive that's bootable from other motherboards on this motherboard? Qualification This question is not a duplicate of this one because directly writing to the flash drive as an ISO 9660 (dd if=operating_system.iso of=/dev/sdb) still does not have the motherboard recognize the operating system. This question should be a duplicate of this one because I provide more information not provided by that poster. This forum thread has broken links and does not have a solution to my problem. Nobody knows what's going on in this forum thread.

  Read the article

• How to make an excel formula which totals several agecent rows based on cell values

  - by Yishai

  I have an excel sheet with three columns: date, person and percentage. I would like to put in a data validation that flags cells if the total for a given data/person combination do not equal 100%. Is that possible? In other words, in the custom formula of a data validation, I would like to make the following type of formula. =if(sum( cells with a (date = the date on this row, person = person on this row))=1) Is there a function which will return the cells in a range conditioned on certain values, or will sum the cells. Note that if it is not possible to do two cells, I have no issue adding a cell which combines both values for the purpose of effecting the lookup.

  Read the article

• Outlook plugin/macro - "Got the wrong bob"

  - by tumchaaditya

  I want to develop a feature in outlook similar to 'Got the wrong bob' feature in Gmail. I want my plugin/macro to check the addressees when I hit send and want to alert me if I have included wrong person. I need some ideas about how can I build the logic for this feature? Or how should I go about it? If such plugin is already there then even better.. P.S.: I have already checked SendGuard and it is not of much use in this case.

  Read the article

• Flash Player in Windows 7 X64 problems

  - by Flupkear

  I'm having a lot of problems with flash player in my win 7 X64 laptop, in YouTube the videos are completely black, you can only hear the sound and in Vimeo the videos are played well in normal size but completely black in fullscreen. Also some days ago YouTube played normal size videos but with controls not visible. I'm sure that the problem isn't the browser since this happen in Chrome, Firefox and IE 8. My laptop is a Dell XPS L501X, the flash version is 10,2,152,26 and the OS is Windows 7 Home Premium with SP1. I'll appreciate any help.

  Read the article

• Can an administration extraction of an MSI file perform registry and/or system wide changes?

  - by Wil

  I am always getting MSI (or setup EXEs which are basically MSI) files, and half the time they really do not need to be a setup. Microsoft is probably one of the biggest sources - almost every time I want to download a little source code sample, it has a MSI which if you install, only usually has three files. I would rather not do an install and add it to the add/remove programs and who knows what else (although I am sure it wouldn't be that bad) for the sake of three files! For this reason, I always use the following command: MSIEXEC /a <filename.msi> /qb TARGETDIR=<directory name> Now, this works fine and I have never had problems... However, I was just browsing some articles on Technet and found the following resource about administration installs. Apparently, MSI files can have two sequences: The AdminUISequence Table and the AdminExecuteSequence Table. I am not so worried about the AdminUISequence Table as it states that "The installer skips the actions in this table if the user interface level is set to basic UI or no UI", and this is what the /qb switch I use does. However, there is nothing similar written against AdminExecuteSequence Table. I realise that many people who write MSI files simply do it for a single end user and probably do not even touch the admin install options, however, is it possible for them to set items that can affect the system and if so, is there a fail proof way of extracting? I do already use 7-zip, however despite it being on the "supported" page, MSI support is lacking... well... completely sucks. It looses the file names and is generally useless. They have a bug which was closed with no reason/resolution over three years ago, and I opened a forum post and haven't had a reply. I would not really want to install any additional programs if I could help it and just want peoples opinions on this. Thanks. edit - Should also say, I run with UAC on, and I have never ever had a elevation prompt whilst performing the MSIEXEC operation, so I am guessing I have never had a system wide change, however, I am still curious as to if it is possible... As if changes (even just to the user) are possible I would do this locally/in a VM and never on a server or place of importance!

  Read the article

• ubuntu hardrive repartition without uninstalling ubuntu or windows 7 and losing data of hardrive

  - by user141692

  I have and asus r500v with 750 gb gpt system uefi motherboard core i7 3610qm, nvidia geforce gt, with ubuntu and w7 dual boot, I had problems installing ubuntu because of the grub but I fix it with https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/807801, but I still have the problem of "warning: the partition is misaligned by 3072 bytes. this may result iin very poor performance. Repartitioning is suggested" in every linux partitioin I made and my 750 gb is not being used at the maximun capacity it only uses 698 gb. I want to make partitions so that the warning doesnt show up and I can use the maximum capacity of the HDD, as I did with another dual boot laptop (compaq presario cq40). I have the following partitions: unknown 1.0Mb: partition type: lynux Basic DAta partition, device: /dev/sda2 Usage: --, Partition flags: --, partition label:-- warning: the partition is misaligned by 3072 bytes. this may result in very poor performance. repartitioning is suggested. -system 210 Mb FAt, usage: Filesystem, partition type: EFI system Partition, Partition Flags:--, Label: system, Device: /dev/sda1, partition label: EFI system partition, Capacity 210MB, avilable:--, Mount Point: mounted at /boot/efi -134 Mb NTFS, usage: filesystem, partition type: linux basic data partition, partition flags:.--, device: /dev/sda7, partition label: --, capacity: 134MB,available:--, mount point: not mounted -OS 250 GB NTFS, usage: file system, partititon type: linux basic data partition, partition flags: --, type: NTFS, label: OS, device: /dev/sda3, partition label: basic data partition, capacity: 250 GB, available:-, mount point: not mounted -10GB FAT 32, usage: filesystem, partition type: EFI system partition, partition flags:--, type: FAT 32, label: --, device: /dev/sda4, partition label: --, capacity: 10GB, available:--, mount point: not mounted warning: the partition is misaligned by 3072 bytes. this may result in very poor performance. repartitioning is suggested. -10gb ext 4, usage: file system, partition type: linux basic data partition, partition flags:--, type: EXT4(version1) label:--, device: /dev/sda9, partition label:--, capacity: 10 GB, available:--, mount point at / warning: the partition is misaligned by 1536 bytes. this may result in very poor performance. repartitioning is suggested. -478GB ext4, usage: filesystem, partition type: linux basic data partition, partition flags:--, type: EXT4, label:--, device: /dev/sda5, partition label:--, capacity: 478gb, available:--, mount point: mounted at /home warning: the partition is misaligned by 512 bytes. this may result in very poor performance. repartitioning is suggested. -2.0gb Swap 2.0Gb, usage: swap space, partition type: linux swap partitioin, partition flags:-, device: /dev/sda6, partition label: capacity: 2.0gb warning: the partition is misaligned by 512 bytes. this may result in very poor performance. repartitioning is suggested. and as you can see it is not well organized so please help me to organize the partitions witahout uninstalling the w7, and if possible the grub2

  Read the article

• IBook G4 Charging Problems?

  - by Drew

  Hello, I am having some trouble with my iBook G4. It seems that whenever I plug it into the wall charger that it doesn't charge. It's not the charger's fault. There's a button on the back of it right next the battery, when I push it all five lights next to the button light up. I don't think where the charger is put in is broken. Any help? .

  Read the article

• How can I view the binary contents of a file natively in Windows 7? (Is it possible.)

  - by Shannon Severance

  I have a file, a little bigger than 500MB, that is causing some problems. I believe the issue is in the end of line (EOL) convention used. I would like to look at the file in its uninterpreted raw form (1) to confirm the EOL convention of the file. How can I view the "binary" of a file using something built in to Windows 7? I would prefer to avoid having to download anything additional. (1) My coworker and I opened the file in text editors, and they show the lines as one would expect. But both text editors will open files with different EOL conventions and interpret them automagically. (TextEdit and Emacs 24.2. For Emacs I had created a second file with just the first 4K bytes using head -c4096 on a linux box and opened that from my windows box. I attempted to use hexl-mode in Emacs, but when I went to hexl-mode and back to text-mode, the contents of the buffer had changed, adding a visible ^M to the end of each line, so I'm not trusting that at the moment. I believe the issue may be in the end of line character(s) used. The editors my coworker and I tried (1) just automagically recognized the end of line convention and showed us lines. And based on other evidence I believe the EOL convention is carriage return only. (2) return only. are able to recognize and To know what is actually in the file, I would like to look at the binary contents of the file, or at least a couple thousand bytes of the file, preferablely in Hex, though I could work with decimal or octal. Just ones an zeros would be pretty rough to look at.

  Read the article

• Linux Ubuntu: Updating the GRUB menu

  - by Mr X

  So apparently there are 2 versions of Linux on my laptop(I have a dual boot system with Linux and Windows 8 but Linux is the master OS). One of them uses the Kernel version 3.11.0 whose headers + source code are incompatible with my wireless driver. My laptop is a Toshiba Satellite with a Realtek RTL8188CE wireless lan.So the newer kernel version is still the first option on the menu and to get to Linux I use the "Previous versions of linux" which is running Kernel version 3.2.0-55. What can I do to update the grub menu so that Linux version with the 3.2.0-55 Kernel appears as the primary option? Do I need to get rid of/uninstall the newer kernel version? How can I do this without screwing up Linux entirely?

  Read the article

• Having issues with flickering output to TV from Windows 7 laptop

  - by Nimmy Lebby

  I cannot tell why this is happening. I cannot get a pattern as to when it happens. Sometimes, I watch entire Hulu content without any interruptions. Other times, it happens 2-3 times in a span of 3 minutes. Then it stops for 10-15 minutes. Lenovo T410s Integrated graphics: Intel HD Graphics (Driver=8.15.10.2253, Video BIOS=2026.1) TV is a Zenith (does not happen with other laptop so doubt it's TV) TV connected to laptop using HDMI-to-DVI cable (previously was connected directly via DVI but I bought a new cable and it's still happening) Anyone could help me troubleshoot this? I'd greatly appreciate it. If you need more information, I'll be glad to provide it.

  Read the article

• Default shell for running scripts (w/o shebang) in macos?

  - by Igor Spasic

  I have ZSH as default shell in MacOS, everything is working fine. ZSH is installed as brew package, Ive set default shell in my account, new shell is listed in /etc/shells... everything is set, like I've said. I have some shell scripts in which I use some commands from zsh, like print. When I execute the script from command line, the print command is not recognized and the script fails. This script does not have the shebang line. When I put the shebang line for zsh, then everything works; the print command is working. Since I am using only ZSH, is it possible to set default shell for running scripts, so I don't have to put shebang line in my .zsh scripts? Or is it possible to associate .zsh extension to ZSH shell execution?

  Read the article

• Snow Leopard on Core Duo

  - by Brendan Foote

  The first run of MacBook Pros have Core Duo processors, whereas all the ones after that have Core 2 Duos. Apple says Snow Leopard only requires an Intel processor, but will a first-gen MacBook Pro get enough of the improvements to be worth upgrading? This is similar to the question about Snow Leopard on an old iBook, but it differs because this processor is supported by Apple, but seems counter to the 64-bit theme of the upgrade.

  Read the article

• CPU and Motherboard clock speeds

  - by NZHammer

  I have been doing some reading about CPU clock speeds and how CPU clock speeds are calculated. After reading several articles, I have come to the understanding that your CPU clock speed is determined by: CPU clock speed = cpu multiplier x mobo clock speed A few questions came about after reading this which I cannot seem to find the answer to anywhere: If the CPU clock speed is dependent upon the mobo clock speed, then how is the clock speed of the CPU predetermined upon buying the CPU (i.e. written on the box without knowing what mobo is being used)? After installation, does the CPU adjust it's multiplier based upon the mobo clock speed to achieve advertised speeds? For example, if the CPU clocks speed is advertised at 2.4GHz and the mobo clock speed is 100MHz, will the multiplier be automatically set to 24x? Why does mobo clock speed seem to not be very important / talked about? For example, when I search on Newegg, mobo clock speed never seems to be listed. When I search enthusiast forums and overclocking forums, mobo clock speed is rarely mentioned. To me, it seems like the mobo clock speed would be pretty important. If I am understanding things correctly, a lower mobo clock speed means that you CPU must work harder to achieve advertised clock speeds. I guess that I should stop there with the questions for now, as I may be asking my questions based on incorrect assumptions. Thanks!

  Read the article

• How can I add a wireless router to a wired router?

  - by Tester101

  The Setup: wired D-link (EBR-2310) router connected to my cable modem. Wireless NetGear N300 (WNR2000v3) router connected to a LAN port on the wired router. What I'm trying to do: I'm trying to setup the wireless router to be a separate network, that only accesses the internet through the wired router. What I've done so far. I setup the wireless router's WAN port to get an address from ISP (which should be coming from my wired router running DHCP), and the LAN as a subnet (192.168.1). Wired router's LAN is 192.168.0. The problem: I'm not able to connect to the internet from the wireless router. At one point my wired router showed that it was handing out an IP to the wireless router, but that is not happening anymore. The question: Is what I'm trying to do possible? Am I not thinking about this properly? Do I need to buy a better wired router, with 2 WAN ports? How can I configure these routers to work together?

  Read the article

• 32bit / 64bit DOS Available

  - by SamSol

  Is there any 32bit / 64bit DOS Available?

  Read the article

• What is the best free font converter?

  - by Stefan

  What is the best free font converter? Online or not doesn't mather. Please motivate your choice. One tip per post please.

  Read the article

• What Excel formats are (most) compatible with LibreOffice and Google Docs?

  - by iconoclast

  I use Excel (and occasionally Numbers), but I want to be able to share with users of Google Docs and LibreOffice (and I may want to switch in the future). What's the most compatible format to save my Excel spreadsheets in? I'm asking as a question here rather than merely Googling for a list of formats that LibreOffice and GoogleDocs support (although I'm doing that too, and will post the answer if no one else does) because there are likely to be hidden "gotchas" that only someone who has experience using all of the above applications is going to know about. Answers that include personal experience will be preferred over those that only post a link to the relevant facts on google.com and libreoffice.com.

  Read the article

• VirtualMachine logs into VPN, share connection with host

  - by srirangan

  My customer's VPN will only work on IE6 32bit. So I got a Windows XP 32bit VM installed and got the VM to connect into the VPN. I would now like to share VPN connection with the host (Windows 7 64bit). How do I go about it? Thanks, Sri

  Read the article

• Are there netcat-like tools for Windows which are not quarantined as malware?

  - by Matthew Murdoch

  I used to use netcat for Windows to help track down network connectivity issues. However these days my anti-virus software (Symantec - but I understand others display similar behaviour) quarantines netcat.exe as malware. Are there any alternative applications which provide at least the following functionality: can connect to an open TCP socket and send data to it which is typed on the console can open and listen on a TCP socket and print received data to the console ? I don't need the 'advanced' features (which are possibly the reason for the quarantining) such as port scanning or remote execution.

  Read the article

• stack docklets in rocket dock

  - by user23950

  Do you know of any tutorial on how to install this stack docklet for rocket dock

  Read the article

• Legality of ripping DVD audio

  - by Smashery

  I want to buy several live music DVDs, but I also want to be able to put the music in my playlists. It seems ridiculous that I should also have to buy the Live CD version. Is it legal (particularly under Australian law) to rip the audio?

  Read the article

• Memory and CPU optimizers: Are they gimmicks?

  - by dotnetdev

  Are tools which analyse which enable you to use all your CPU cores and also tools which help you to regain memory (can't think of any just yet but seen plenty) a gimmick? Do these tools really work?

  Read the article

• How do I limit the CPU share of TrustedInstaller.exe on a Vista system

  - by Dan Neely

  I'm trying to fix a few low end single core desktops running Vista. In normal use they're fast enough not to be a problem. The issue is that because these machines are only on when being used, primarily for school work, windowsupdate begins installing patches it launches TrustedInstaller which in turn hogs 100% of the CPU and renders the machines all but unusable for however long it takes to patch them.

  Read the article

• Windows Updates Folders (With Strange Names) in C drive

  - by Kanini

  I have a Windows XP Professional SP 3. In my C drive, I have a lot of folders which I do not know why they exist. Sample these names - 1da9de11ed14f5da3b6ace4e25f5 a0332ef3abcaf03e49 What are they? Why are they created? Can I delete them? And no, "Windows XP is an old system. You need to skip, hop and jump to Windows 7" is not a valid answer. :-)

  Read the article

< Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >