Search Results

Search found 95133 results on 3806 pages for 'switch user'.

Page 466/3806 | < Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >

• Postfix auto create Maildir

  - by Eugene

  I've been beating my head against a wall for a while now on this one. Basically, here is the rundown: Our MX record points to a frontend SMTP server, which contains aliases for actually routing the mail. No alias, no access to the backend storage server, which is what our clients connect to. I'm upgrading the backend email server. Currently, a user is created for every email user on the server, which creates the mailbox. On the new server, everything autheticates through PAM to an LDAP server (all of which is working properly). My goal is to get Postfix to create the Maildir directory for the user automatically. This works fine when I have the /home directory with 777 permissions, but for obvious reasons, this should be avoided. I would like to do this with 775 permissions on /home with a group owner of whatever user Postfix is running as, but I can't seem to figure out what user to use. With the 777 permissions, the /home/$user/Maildir directory is created on message delivery. Does anybody know how I can do this without 777 permissions? The system I am working on is a 64-bit Debian Lenny 5.07 install. Any advice would be appreciated.

  Read the article

• Server-side SSH jump hosts

  - by Dan Sosedoff

  Trying to figure out server side SSH jump hosts logic. Current network schema: [Client] <--> [Server A: hostname: a.com] <--> [Server B] [Client] <--> [Server A: hostname: b.com] <--> [Server C] Server A responds to both DNS records. Possible flow: Client opens a ssh connection with ssh [email protected]. Server A accepts it and should automatically jump user onto Server B with ssh user2@server_b.com. Client opens a ssh connection with ssh [email protected]. Server A accepts it and should automatically just user onto Server C with ssh user2@server_c.com. In other words, client should be able to connect to the target without performing any local configuration, assuming that we have a stock ssh config. The problem with ssh jumps is that user has to define hosts in local ~/.ssh/config file, which is not acceptable in my case. It needs to be a default sshd behavior. Im aware that you can define a custom command ~/.ssh/authorized_keys on server, but i dont think there is a way to properly detect source hostname where user tries to connect. It is possible at all ?

  Read the article

• Exchange 2003 Internet Mail Size Limits

  - by scampbell

  I have unsuccessfully tried to increase per user incoming mail size settings by editing their user account settings on our Exchange server, but large incoming mail from external domains is still blocked using the default global settings. After reading here: http://support.microsoft.com/default.aspx?scid=kb;en-us;322679 I see that All Internet e-mail messages use the global setting for limits on sending and on receiving. The message categorizer evaluates the sender's sending limit and the recipient's receiving limit. In example 2 earlier, a user with a user mailbox limit of 3 MB could receive messages from another user with a 3-MB sending limit. Because Internet users use the global setting, they can send only a 2-MB message. Which to me is madness! Surely if I want to allow a user to receive mail up to a certain size then I should be able to set it as such? Is there a specific way of getting round this? Would setting the global defaults high and setting a lower, say 10MB, limit on the SMTP connector do the trick? Thanks.

  Read the article

• /etc/hosts: What is loghost? (fresh install of Solaris 10 update 9)

  - by cjavapro

  # # Internet host table # ::1 localhost 127.0.0.1 localhost XX.XX.XX.XX myserver loghost What is the purpose of loghost? If it was not for having loghost in there, all the /etc/hosts files on all the servers in this particular network could be identical. Edit: I looked at /etc/syslog.conf #ident "@(#)syslog.conf 1.5 98/12/14 SMI" /* SunOS 5.0 */ # # Copyright (c) 1991-1998 by Sun Microsystems, Inc. # All rights reserved. # # syslog configuration file. # # This file is processed by m4 so be careful to quote (`') names # that match m4 reserved words. Also, within ifdef's, arguments # containing commas must be quoted. # *.err;kern.notice;auth.notice /dev/sysmsg *.err;kern.debug;daemon.notice;mail.crit /var/adm/messages *.alert;kern.err;daemon.err operator *.alert root *.emerg * # if a non-loghost machine chooses to have authentication messages # sent to the loghost machine, un-comment out the following line: #auth.notice ifdef(`LOGHOST', /var/log/authlog, @loghost) mail.debug ifdef(`LOGHOST', /var/log/syslog, @loghost) # # non-loghost machines will use the following lines to cause "user" # log messages to be logged locally. # ifdef(`LOGHOST', , user.err /dev/sysmsg user.err /var/adm/messages user.alert `root, operator' user.emerg * ) Very interesting. when shutting down,, alerts go to all users probably through *.emerg * Looking at ifdef, it seems that the first parameter checks to see if current machine is a loghost, second parameter is what to do if it is and third parameter is what to do if it is not. Edit: If you want to test a logging rule you can use svcadm restart system-log to restart the logging service and then logger -p notice "test" to send a test log message where notice can be replaced with any type such as user.err, auth.notice, etc.

  Read the article

• Perfmon % Processor Time vs. task manager's CPU usage

  - by nat

  I'm new to using Perfmon and performance monitoring in general (so go easy on me please ;) I know that Perfmon doesn't have anything exactly like Task Manager's CPU usage display, but I'm trying to figure out how to monitor user's CPU usage via Perfmon in a similar way, and trying to understand the measurements (or how to convert the numbers to get a similar understanding) For example, if in Task Manager, a particular user is consistently using more than 5% CPU, I would want to contact the user about it. I learn best by example, so here is exactly what I'm trying to do, with a specific example: This is for a 32-bit Dual Quad Core Windows 2003 web server (8 CPUs), there are many web sites on the server, each running within their own application pool/worker process ID. Through other research here I learned of a registry change that I made so that the PID shows up with the w3wp process so I can easily identify the site later by cross-referencing it. I set up a counter with the following settings: Process -> % Processor Time -> all instances Here is an example. Say I'm interested in "black line" user in this graph below, as his process is spiking quite high compared to all the other users: (I wasn't allowed to post the image as I'm a new user on this site.. I've uploaded the image to:) http://i35.tinypic.com/106yn8k.jpg So... using this as an example, I see that they have an AVERAGE % PROCESSOR TIME of 23.264 , and have spiked as high as 103.124 So what exactly does this 23.264 number mean to me? Is it similar to an average of Task Manager's CPU reading for this user? Or, since this server has 8 CPUs, should I divide this number by 8? (23.264/8 = 2.9% AVERAGE CPU LOAD?) Thanks in advance.

  Read the article

• i dont understand error while connecting php and mysql? user denied ? plz help me out to solve. ?

  - by user309381

  class MySQLDatabase { public $connection; function _construct() { $this->open_connection();} public function open_connection() {$this->connection = mysql_connect(DB_SERVER,DB_USER,DB_PASS); if(!$this->connection){die("Database Connection Failed" . mysql_error());} else{$db_select = mysql_select_db(DB_NAME,$this->connection); if(!$db_select){die("Database Selection Failed" . mysql_error()); } }} public function close_connection({ if(isset($this->connection)){ mysql_close($this->connection); unset($this->connection);}} public function query(/*$sql*/){ $sql = "SELECT*FROM users where id = 1"; $result = mysql_query($sql); $this->confirm_query($result); //return $result;while( $found_user = mysql_fetch_assoc($result)) { echo $found_user ['username']; } } private function confirm_query($result) { if(!$result) { die("The Query has problem" . mysql_error()); } } } $database = new MySQLDatabase(); $database->open_connection(); $database->query(); $database->close_connection(); I am getting error like denied for user system@locahost(using password no).i have also other database but it runs fine and i dont also i have set the password after encountered the error what else can do to solve plz help ?

  Read the article

• Getting PATH right for python after MacPorts install

  - by BenjaminGolder

  I can't import some python libraries (PIL, psycopg2) that I just installed with MacPorts. I looked through these forums, and tried to adjust my PATH variable in $HOME/.bash_profile in order to fix this but it did not work. I added the location of PIL and psycopg2 to PATH. I know that Terminal is a version of python in /usr/local/bin, rather than the one installed by MacPorts at /opt/local/bin. Do I need to use the MacPorts version of Python in order to ensure that PIL and psycopg2 are on sys.path when I use python in Terminal? Should I switch to the MacPorts version of Python, or will that cause more problems? In case it is helpful, here are more facts: PIl and psycopg2 are installed in /opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages which pythonreturns/usr/bin/python echo $PATHreturns (I separated each path for easy reading): :/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/ :/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages :/opt/local/bin :/opt/local/sbin :/usr/local/git/bin :/usr/bin :/bin :/usr/sbin :/sbin :/usr/local/bin :/usr/local/git/bin :/usr/X11/bin :/opt/local/bin in python, sys.path returns: /Library/Frameworks/SQLite3.framework/Versions/3/Python /Library/Python/2.6/site-packages/numpy-override /Library/Frameworks/GDAL.framework/Versions/1.7/Python/site-packages /Library/Frameworks/cairo.framework/Versions/1/Python /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python26.zip /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6 /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/plat-darwin /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/plat-mac /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/plat-mac/lib-scriptpackages /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/lib-tk /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/lib-old /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/lib-dynload /Library/Python/2.6/site-packages /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/PyObjC /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/wx-2.8-mac-unicode I welcome any criticism and comments, if any of the above looks foolish or poorly conceived. I'm new to all of this. Thanks! Running OSX 10.6.5 on a MacBook Pro, invoking python 2.6.1 from Terminal

  Read the article

• 32-bit Ubuntu or 64-bit w/Intel Atom D510 w/4GB RAM?

  - by T.J. Crowder

  (I've seen this question and some related ones, and perhaps this is a duplicate although part of my question is specific to the Atom D510.) I'm going to be installing Ubuntu on a new silent desktop as my latest (and hopefully last) attempt to switch from Windows to Linux for at least most everyday tasks. The new machine is entirely passvely cooled, but as a consequence, not astonishingly powerful — an Atom D510 (dual-core, 1.6GHz, HT) on Intel's D510MO board. That's fine, I won't use it for gaming, (much) video editing, etc. It's a 64-bit processor and I'm maxing the board out at 4GB of RAM (hey, that 1.6 CPU needs all the help it can get), which naturally raises the question of whether to install Ubuntu 64-bit or 32-bit (and if the latter, either live with the missing RAM, or do the PAE kernel dance). Although I've used Linux on servers for years, I'm very nearly a Linux desktop newbie and am not currently in the mood to fight driver wars and such. So if I'm setting myself up for failure with 64-bit, I'll live with the missing ~0.8GB or fiddle with PAE. But if 64-bit is entirely "ready," great, I'm there. So: Do most mainstream apps (now) play nicely with 64-bit Linux? I can't help but notice the "AMD" in the ISO image filename ubuntu-10.04-desktop-amd64.iso and I know AMD lead the way on this stuff — does Ubuntu 64-bit play nicely with Intel processors? Just generally, would you recommend one or the other? (And if anyone has any experience with Ubuntu specifically on the D510 [32-bit or 64-bit] which might lead me one way or t'other, that would be useful.) Thanks in advance.

  Read the article

• When tab groups are loaded, Firefox becomes unresponsible for minutes (Unresponsive script)

  - by unor

  I have several tab groups (~ 20) in Firefox. I can start the browser without any problems. However, as soon as I … click at the "Group tabs" icon in the toolbar, or right-click on a tab and hover over "Move to tab group", … Firefox becomes unresponsible/freezes for a rather long time (more than 2 minutes). It seems to load all tab groups (it doesn't load all the pages! I deactivated this in the settings). While this is happening, I get several "Unresponsive script" warnings, like: Script: chrome://global/content/bindings/tabbox.xml:0 (most of the time) Script: chrome://global/content/bindings/tabbox.xml:418 Script: chrome://browser/content/tabview.js:400 Script: chrome://browser/content/tabview.js:522 Script: resource://modules/sessionstore/SessionStore.jsm:3578 Script: resource:///components/PageThumbsProtocol.js:79 (rare) Script: resource://gre/modules/XPCOMUtils.jsm:323 (rare) (probably also other warnings, didn't record them yet, though) On all of these I click "Continue". After ~ 2-3 minutes and 3-5 warnings, I can use Firefox again. Now I can switch tab groups without any problems. Why is this happening? How can I prevent the long loading time? Is there maybe a about:config setting I could try? I started Firefox in Safe Mode (= without any add-ons): the problem still exists.

  Read the article

• Connection speed drops from 1 Gbps to 10 Mbps (Vista 64)

  - by Kevin Hakanson

  I recently got a Windows Home Server (HP MediaSmart Server EX490) setup so I could do backups and other things. However, I am having trouble on my Vista 64 PC. The backup will be making great progress, then it will just slow down. At one point, I noticed the lights on my Netgear GS105 indicated it was not using a 1000 Mbps connection, but a 10 Mbps one. I checked the Status of Local Area Connection (Intel(R) 82567V-2 Gigabit Network Connection) and that also showed the same slow speed. This has happened several times in the last couple days. When I disabled the network device, and then enabled it, it established the 1 Gpbs connection again. However, some of the times the Sent Bytes Activity on the Status windows indicate that the data flow is still slow (100 to 1000 bytes every couple seconds). Obviously, at this rate I could backup faster to floppy disk. :) My question is how to diagnose and fix this problem. When I look at the Administrative Events, I do a Errors: Bonjour Service 456: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.) And a Warning: e1yexpress Intel(R) 82567V-2 Gigabit Network Connection Link has been disconnected. I am suspicious there is some power saving mode. I found a post suggesting System Idle Power Saver(SIPS) may be the issue. I am going to try that, but looking for other suggestions or diagnostic advice. I have several new items in this configuration: server, client software, switch and cat6 cables.

  Read the article

• How do I hide "Extra File" and "100%" lines from robocopy output?

  - by Danny Tuppeny

  I have a robocopy script to back up our Kiln repositories that runs nightly, which looks something like this: robocopy "$liveRepoLocation" "$cloneRepoLocation" /MIR /MT /W:3 /R:100 /LOG:"$backupLogLocation\BackupKiln.txt" /NFL /NDL /NP In the output, there are a ton of lines that contain "Extra file"s, like this: *EXTRA File 153 E:\Kiln Backup\elasticsearch\data\elasticsearch-kiln\nodes\0\indices\kiln-2\0\index\_yxe.fdt *EXTRA File 12 E:\Kiln Backup\elasticsearch\data\elasticsearch-kiln\nodes\0\indices\kiln-2\0\index\_yxe.fdx *EXTRA File 128 E:\Kiln Backup\elasticsearch\data\elasticsearch-kiln\nodes\0\indices\kiln-2\0\index\_yxe.fnm *EXTRA File 363 E:\Kiln Backup\elasticsearch\data\elasticsearch-kiln\nodes\0\indices\kiln-2\0\index\_yxe.frq *EXTRA File 13 E:\Kiln Backup\elasticsearch\data\elasticsearch-kiln\nodes\0\indices\kiln-2\0\index\_yxe.nrm Additionally, there are then hundreds of lines at the bottom that contain nothing but "100%"s, like this: 100% 100% 100% 100% 100% 100% 100% In addition to making the log files enormous (there are a lot of folders/files in Kiln repos), it makes it annoying to scan through the logs now and then to see if everything was working ok. How do I stop "Extra Files" appearing in the log? How do I stop these silly "100%" lines appearing in the log? I've tried every combination of switch I can think of (the current switches are listed above in the command), but neither seem to hide these!

  Read the article

• How to use cyg-wrapper to fork a new tab in win32 gvim

  - by Peter Nore

  I would like to set up an alias in my cygwin .bashrc that translates pathnames unix-to-dos and passes them to windows gvim in a new tab of an existing instance. I am trying to use Luc Hermitte's cyg-wrapper script for running native win32 applications from Cygwin as per this vim tip. Luc's example of how to use his script is: alias vi= 'cyg-wrapper.sh "C:/Progra~1/Edition/vim/vim63/gvim.exe" --binary-opt=-c,--cmd,-T,-t,--servername,--remote-send,--remote-expr' I do not understand this example because most of these vim parameters (-c,--cmd,--servername,--remote-send,--remote-expr, etc) require more information, and I have not found any example of how to supply the additional information to cyg-wrapper.sh. For example, calling C:/Progra~1/Edition/vim/vim63/gvim.exe --servername=GVIM --remote-tab-silent file1 & will open file1 in a new tab of existing (or non existing) instance GVIM, but calling gvim --servername accomplishes nothing on its own. Unfortunately, though, the corresponding cyg-wrapper phrase does not work: cyg-wrapper.sh "C:/Progra~1/Edition/vim/vim63/gvim.exe" --binary-opt=--servername=GVIM,--remote-tab-silent --fork=2 file1 If ran twice, this actually opens up two instances of gvim; it is as if the servername 'GVIM' is being stripped and ignored. How do you supply a servername to gvim --servername or a .vimrc to gvim -u using cyg-wrapper.sh? Furthermore, why is it that programs must be passed to cyg-wrapper.sh in the relatively obscure "mixed form?" For example, if I try cyg-wrapper.sh "/cygdrive/c/path/to/GVimPortable.exe" --binary-opt=--servername=GVIM,--remote-tab-silent --fork=2 I get "Invalid switch - "/cygdrive"." See also: getting-gvim-to-automatically-translate-a-cygwin-path alias-to-open-gvim-cream-version-from-cygwin-shell

  Read the article

• KVM recommendations

  - by alex

  I recently tried out a cheaper KVM solution, a dual monitor one with a USB hub and audio/mic support. It seemed the perfect KVM. However, these are my experiences. When using my keyboard via the PS/2 connection, none of my multimedia keys work (useful, because it has a volume control and my speakers do not, only on a wireless remote control.) I plugged the keyboard in via the USB port - and it seemed to work. However, I believe to switch the hub from PC to Mac, you need to use a keyboard combo, which is only supported when the keyboard is plugged in via PS/2 Sometimes the middle mouse button doesn't work when connected via PS/2. The multi monitor is VGA - I just found out by the looks of things my Mac Mini outputs DVI Digital only (though this is my fault!). Mac works with 2 screens, but switching and switching back can cause it not to display on the 2nd screen unless I go detect displays again. My question is - is there a KVM out there that supports these features? USB keyboard and mouse inputs will full multimedia keys support Dual monitor DVI connections Hotkey to change PCs and physical button USB hub Emulate screens attached when switching to a different computer Works with PC and Mac Audio / Microphone support Does one exist, that won't cost the world? So far the only one that seems to support all this (that I can tell) is this one. UPDATE I ended up buying the Aten CS1642. It's expensive, but it seems to work great!

  Read the article

• Problem removing US keyboard layout from input languages

  - by Nazariy

  I'm working on English (UK) version of Windows 7, my second input language is Russian. Since installation of Windows I have removed US keyboard layout and set LEFT ALT+SHIFT as input switcher. Everything was fine until now. Recently I noticed that my switch combination does not always work. I opened language select bar and found there English (US) keyboard layout. I went to settings and found that in General Tab there is only two languages available, US was not listed. I decided to add US layout manually and remove it after. This operation went as expected, US layout disappeared from language bar. But after few hours it appeared again. I started "googling" and found that I'm not alone. On Microsoft forum I found suggestion to remove US layout as I did before and than copy all settings to all profiles. It's look like some service are adding US layout on it's own, but I have no idea which one. Does any one know how to fix this issue?

  Read the article

• Why does Windows 7 always automatically change the input or keyboard language?

  - by B-Ball

  I am wondering why Windows 7 always automatically changes my input or keyboard language. I've a notebook with an integrated QWERTY keyboard English (United States). Traveling, I use that one but, additionally, I've my own as well as a much better keyboard at home which is a QWERTZ keyboard German (Germany). Thus, being at home, I'd like to use my QWERTZ keyboard. Unfortunately, Windows 7 does not play along at this one. Every time, I start up my notebook, it is usually set to English (United States) but that's not the problem. In case, I'd use my notebook QWERTY keyboard English (United States), that's fine. However, if I start up my notebook and I'd like to use my QWERTZ keyboard German (Germany), I usually press ALT + Left Shift in order to switch from English (United States) to German (Germany) and Windows 7 switches the input language but only for the program that is currently open. If my input language is set to German (Germany) and I, e.g., open NotePad, Windows 7 automatically switches my input language to English (United States). This is very annoying since I've to change the input or keyboard language to German (Germany) every time I open up a new program. Why doesn't Windows 7 stay with one input language if I changed it manually by pressing ALT + Left Shift? Why doesn't the manual change of the input or keyboard language apply for the whole Windows 7? Why does it only affect the currently opened program? Since I've two keyboards with two different layouts, I seriously need to have both of the keyboards languages installed. I tried both of the below settings in order to find a solution for my problem. Currently, I am using the first option, two input languages. First option: Two input language - www.abload.de/img/19aie.jpg Second option: Two keyboard languages - www.abload.de/img/2nb4x.jpg Thank you very much in advance.

  Read the article

• How can I use Linksys WPSM54G print server as a bridge for another machine AND also share the printe

  - by user26453

  I have a Linksys WPMS54G currently sharing a printer via the USB port with the rest of my network via the wireless. Is there any way to set it up so that the ethernet port is bridged over the wireless adapter portion? i.e., be able to uplink another machine or switch into the network via the WPMS54G's ethernet port? Update: The network architecture is as follows: (1) Linksys WRT54G router that serves as a router, DHCP server, and wireless access point for the network. Fairly standard configuration (3) Laptops that are used throughout the house via wifi (1) Linksys WPSM54G printer server that connects via wireless to the router, in a separate room with a printer attached to print seerver's USB port along with (1) Un-networked desktop in the same room Since the printer is plugged into the USB port of the WPSM54G, I am wondering if I can connect the desktop to the ethernet port of the WPSM54G and have it bridged over the wifi to the router. The twist here is that the ethernet is initially used to connect the wireless print server to the router (for configuration, can't configure it wirelessly if you are initially on a encrypted network). Now instead of using that ethernet port as a way to connect the print server to the network (via the router), I want to use the ethernet port as a way to connect another computer to the network, in effect bridging into the router via the print server, while still sharing the printer (attached via USB) through the print server. If this is not clear, please comment. To be clear, the computer I want to connect/bridge into the network does not have a wireless card, is far from the router, and I do not want to lay ethernet cable to connect it. While I could certainly buy a legitimate wireless bridge to accomplish this, I figured since the print server already has an ethernet port, see if I can't use that.

  Read the article

• Asus WL-520GU conflicting subnet (and/or IP) with 2Wire DSL

  - by Paula

  I have an Asus wireless router: WL-520GU... and an AT&T 2Wire for my DSL connection. When I try to browse anywhere, I just get an odd message from the Asus router (in the common Asus broken-English, bad formatting, and awful spelling): http://postimage.org/image/upxrjflcj I guess it's trying to say: Your Asus Router and your 2Wire have the same subnet mask. (It doesn't say if that's good, or bad... but it sounds like they must be different.) but... But for the "solution" it looks like it's trying to say: Your Asus Router and your 2Wire have the same IP address. My Asus has the defaults: 192.168.1.1 and 255.255.255.0 My 2Wire has: 192.168.1.66 I'm not seeing where the conflict(s) could be. The Asus firmware is v3.0.0.14 . None of these problems occur with the old v3.0.0.8 firmware. Any ideas on how to fix this? (PLEASE don't say to run a totally different DD/Tomato firmware because it's "better". I need to fix THIS 1 problem, not try to convince my company to switch everything to an entirely different set of problems.)

  Read the article

• "Modern" Ethernet over coax

  - by Electrons_Ahoy

  So, I've just bought a house. It's reasonably new - built in the early '00s. One of the features that got built in was a cable TV drop in every room. The cabling is gorgeous - there's even a wiring cabinet of sorts in a closet where the cables all tie together to the splitter to the outside line. Of course, my problem is that I only own the one TV. I do, however, own a few computers. What I would love to be able to do is drop a switch in the wiring closet and run 100/1000BASE-T ethernet over the coax in the walls I wouldn't otherwise be using. My fantasy would be if you could get some kind of adapter-plug-thing that would take a coax plug on one side and a cat5/RJ45 plug on the other. Had anyone else done this? Any suggestions? (There are a few other options that suggest themselves - first, I could just use the existing cabling channels and re-run cat5 or 6 through the walls. While tempting, that sounds like more work than I really want to put in, so I'm calling that Plan B. Also, I could just scare up a mess of old 10BASE2 cards and run the house on thinnet, all mid-90s style. While I think I'd get major style points for that, I don't think I can get a 10BASE2 adapter for the new laptop. Also, I have all these super-snazzy gigabit adaptors I'd like to be using. And so forth.)

  Read the article

• Open Office crashes, recovers, crashes again

  - by Daniel R Hicks

  After completely reinstalling my laptop due to apparent registry corruption, I've encountered a problem with Open Office: I open a simple Calc spreadsheet, it comes up normally, but then after anywhere from 5 seconds to several minutes (without even touching the Calc window) OO crashes, then comes up through recovery. If I let it "recover" it will do so and bring the spreadsheet up again, only to repeat the crash scenario again. If I kept clicking "OK" it would apparently do this all day. I reinstalled OO once and the problem went away for awhile, but it came back. I then attempted to "reset" my profile (ie, rename the OO user directory in App Data), but OO crashed during the first startup after that, then resumed the original behavior. If I open the same file using Excel it complains of errors in the file, and "recovers" them, but the "error report" it generates contains no details. If I save the "recovered" file then OO Calc will open it, but the problem returns after saving again. Any ideas? (The system is Vista SP2, running OO 3.4.1) How to reproduce: Start Open Office Calc. Save workspace as "CrashTest.ods" From Task Manager kill Open Office (soffice.exe/bin -- one of each) Double click on the saved "CrashTest.ods" in Explorer. OO puts up a message that recovery will occur -- allow it. When the Calc window comes up, don't touch it -- just wait about 10 seconds. Calc window closes and OO puts up a message that recovery will occur -- from now on the sequence will repeat. I suspect this behavior is limited to a few (recent) versions of OO, and very possibly only Calc. Reported as Open Office Bug 1211094. Sigh!! As much as it irritates me, I'm having to switch over to Excel for several things I used to do with Calc. Excel has a miserable UI, but at least it says up for longer than 10 seconds.

  Read the article

• Install Ubuntu on a new netbook?

  - by torbengb

  I'm planning to buy a netbook, and I am considering to install Ubuntu on it. It would mainly be used by my wife at home for web browsing and email at home (lightweight is important, hence a netbook!), and we'd occasionally bring it along on travels (mostly as digital photo dropzone). I want to use Ubuntu instead of Windows because I'm sick of all the Windows hassle and updates. I'm not concerned about Windows applications; I'd switch to native alternatives as far as possible because really only Firefox and something like Picasa are needed. I'm considering an ASUS Eee PC 1001P or an MSI Wind U100 or an Point of View Mobii II (click the links for specs; nevermind that the rest is German). I'm not in the USA. Whatever I buy will most likely have Windows 7 on it but no optical drive. I would also buy a large-ish USB stick but not an external optical drive. Should I (and can I) install Ubuntu alongside Windows 7, or remove Windows? If I remove Windows first, how would I be able to reinstall it if I change my mind? Can I make a backup? Is a recovery CD usually provided? Should I choose the regular Ubuntu, or the Ubuntu Netbook Remix (UNR)? Does UNR allow me to install additional applications just as easily? Note: I'm asking about Ubuntu vs. Windows; let's skip the hardware discussion for now. Edit: I'm assuming that Windows is already installed; if it isn't then I would only install Ubuntu and this question is irrelevant.

  Read the article

• Sublime text 2 syntax highlighter?

  - by BigSack

  I have coded my first custom syntax highlighter for sublime text 2, but i don't know how to install it. It is based on notepad++ highlighter found here https://70995658-a-62cb3a1a-s-sites.googlegroups.com/site/lohanplus/files/smali_npp.xml?attachauth=ANoY7criVTO9bDmIGrXwhZLQ_oagJzKKJTlbNDGRzMDVpFkO5i0N6hk_rWptvoQC1tBlNqcqFDD5NutD_2vHZx1J7hcRLyg1jruSjebHIeKdS9x0JCNrsRivgs6DWNhDSXSohkP1ZApXw0iQ0MgqcXjdp7CkJJ6pY_k5Orny9TfK8UWn_HKFsmPcpp967NMPtUnd--ad-BImtkEi-fox2tjs7zc5LabkDQ%3D%3D&attredirects=0&d=1 <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>fileTypes</key> <array> <string>smali</string> </array> <dict> <key>Word1</key> <string>add-double add-double/2addr add-float add-float/2addr add-int add-int/2addr add-int/lit16 add-int/lit8 add-long add-long/2addr aget aget-boolean aget-byte aget-char aget-object aget-short aget-wide and-int and-int/2addr and-int/lit16 and-int/lit8 and-long and-long/2addr aput aput-boolean aput-byte aput-char aput-object aput-short aput-wide array-length check-cast cmp-long cmpg-double cmpg-float cmpl-double cmpl-float const const-class const-string const-string-jumbo const-wide const-wide/16 const-wide/32 const-wide/high16 const/16 const/4 const/high16 div-double div-double/2addr div-float div-float/2addr div-int div-int/2addr div-int/lit16 div-int/lit8 div-long div-long/2addr double-to-float double-to-int double-to-long execute-inline fill-array-data filled-new-array filled-new-array/range float-to-double float-to-int float-to-long goto goto/16 goto/32 if-eq if-eqz if-ge if-gez if-gt if-gtz if-le if-lez if-lt if-ltz if-ne if-nez iget iget-boolean iget-byte iget-char iget-object iget-object-quick iget-quick iget-short iget-wide iget-wide-quick instance-of int-to-byte int-to-char int-to-double int-to-float int-to-long int-to-short invoke-direct invoke-direct-empty invoke-direct/range invoke-interface invoke-interface/range invoke-static invoke-static/range invoke-super invoke-super-quick invoke-super-quick/range invoke-super/range invoke-virtual invoke-virtual-quick invoke-virtual-quick/range invoke-virtual/range iput iput-boolean iput-byte iput-char iput-object iput-object-quick iput-quick iput-short iput-wide iput-wide-quick long-to-double long-to-float long-to-int monitor-enter monitor-exit move move-exception move-object move-object/16 move-object/from16 move-result move-result-object move-result-wide move-wide move-wide/16 move-wide/from16 move/16 move/from16 mul-double mul-double/2addr mul-float mul-float/2addr mul-int mul-int/2addr mul-int/lit8 mul-int/lit16 mul-long mul-long/2addr neg-double neg-float neg-int neg-long new-array new-instance nop not-int not-long or-int or-int/2addr or-int/lit16 or-int/lit8 or-long or-long/2addr rem-double rem-double/2addr rem-float rem-float/2addr rem-int rem-int/2addr rem-int/lit16 rem-int/lit8 rem-long rem-long/2addr return return-object return-void return-wide rsub-int rsub-int/lit8 sget sget-boolean sget-byte sget-char sget-object sget-short sget-wide shl-int shl-int/2addr shl-int/lit8 shl-long shl-long/2addr shr-int shr-int/2addr shr-int/lit8 shr-long shr-long/2addr sparse-switch sput sput-boolean sput-byte sput-char sput-object sput-short sput-wide sub-double sub-double/2addr sub-float sub-float/2addr sub-int sub-int/2addr sub-int/lit16 sub-int/lit8 sub-long sub-long/2addr throw throw-verification-error ushr-int ushr-int/2addr ushr-int/lit8 ushr-long ushr-long/2addr xor-int xor-int/2addr xor-int/lit16 xor-int/lit8 xor-long xor-long/2addr</string> </dict> <dict> <key>Word2</key> <string>v0 v1 v2 v3 v4 v5 v6 v7 v8 v9 v10 v11 v12 v13 v14 v15 v16 v17 v18 v19 v20 v21 v22 v23 v24 v25 v26 v27 v28 v29 v30 v31 v32 v33 v34 v35 v36 v37 v38 v39 v40 v41 v42 v43 v44 v45 v46 v47 v48 v49 v50 p0 p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30</string> </dict> <dict> <key>Word3</key> <string>array-data .catch .catchall .class .end .end\ local .enum .epilogue .field .implements .line .local .locals .parameter .prologue .registers .restart .restart\ local .source .subannotation .super</string> </dict> <dict> <key>Word4</key> <string>abstract bridge constructor declared-synchronized enum final interface native private protected public static strictfp synchronized synthetic system transient varargs volatile</string> </dict> <dict> <key>Word4</key> <string>(&quot;0)&quot;0</string> </dict> <dict> <key>Word5</key> <string>.method .annotation .sparse-switch .packed-switch</string> </dict> <dict> <key>word6</key> <string>.end\ method .end\ annotation .end\ sparse-switch .end\ packed-switch</string> </dict> <dict> <key>word7</key> <string>&quot; ( ) , ; { } &gt;</string> </dict> <key>uuid</key> <string>27798CC6-6B1D-11D9-B8FA-000D93589AF6</string> </dict> </plist>

  Read the article

• Force dual-mono audio (L+L or R+R) in Youtube video playback for one-channel audio movies

  - by jakub.g

  Occasionally, I find Youtube videos that have only one audio channel (only left or only right); example video (left channel only). This is quite annoying, especially with headphones on, as I hear sound in one ear, and no sound in the other. So, I want to be able to easily force dual mono (Left+Left or Right+Right) when I find that kind of video, and switch to normal stereo after I finish watching it. I have my headphones plugged well / I don't create audio/video - I want it for real-time playback only, In Windows audio config, setting balance 100% to Left / Right doesn't help (I have either still only left when moved to left, and no sound at all when moved to right), I've checked all the configurations in Control Panel > Sounds and Audio Devices > Audio > Sound Playback > Advanced like suggested in this post, in conjunction with moving balance left/right, and it doesn't seem to have any impact on actual sound I hear in headphones, No need to mix L with R, I just want L+L or R+R, I prefer software solutions to buying a stereo-to-mono adapter, Free solutions please, no $$$ ones, neither trials etc., In Control Panel > Realtek HD Sound Effect Manager I can turn on various mumbo-jumbo effects like: Concert Hall / Hangar / Bathroom / whatever environment (and in fact it makes the sound appear in two ears, but well, it's ridiculous to do this;), but there is no Dual Mono option. Finally, I know I can force L+L or R+R in VLC Player which supports Youtube (well, a little hack is needed, because Youtube internals change from time to time) but it is not very convenient to launch VLC just to play Youtube video - I want to keep it in the browser, I use Firefox generally (but well, if I don't find easier way, I will launch it in VLC).

  Read the article

• HLS video segmenting complications. How to create a transport stream with ffmpeg

  - by Agzam

  I have h264 videos, and currently we're using Apple's HTTP Video Streaming tools and mediafilesegmenter to segment these files. What I need to do is to switch to alternative segmenter based on this very popular open-sourced segmenter The problem is that this segmenter does not just take any video, but takes only MPEG-TS videos. So I have to convert my h264 videos to TS first. I can do that with ffmpeg. I'm using this: ffmpeg -i encoded.mp4 -vcodec h264 -i encoded.mp4 -sameq -acodec aac -strict experimental -f mpegts output.ts But this creates fairly larger output. And the reason is that Apple's segmenter keeps the same codec - AVC and the same audio codec - AAC, whereas ffmpeg changes video format to MPEG Video. The question is: can I somehow keep the same AVC video codec and still convert video to a transport stream? So my goal is to keep the same video quality and same video codecs as Apple's medifilesegmenter does. UPD: Okay... it seems that ffmpeg CAN split videos into segments: ffmpeg -i encoded.mp4 -c copy -map 0 -vbsf h264_mp4toannexb -f segment -segment_time 10 -segment_list test.m3u8 -segment_format mpegts segment%d.ts That's still has one problem: it doesn't create http live streaming index file. (-segment_list creates a file with list of segments, but it doesn't look like HLS index). So, you still have to create index file

  Read the article

• Linux Kernel Packet Forwarding Performance

  - by Bob Somers

  I've been using a Linux box as a router for some time now. Nothing too fancy, just enabling forwarding in the kernel, turning on masquerading, and setting up iptables to poke a few holes in the firewall. Recently a friend of mine pointed out a performance problem. Single TCP connections seem to experience very poor performance. You have to open multiple parallel TCP connections to get decent speed. For example, I have a 10 Mbit internet connection. When I download a file from a known-fast source using something like the DownThemAll! extension for Firefox (which opens multiple parallel TCP connections) I can get it to max out my downstream bandwidth at around 1 MB/s. However, when I download the same file using the built-in download manager in Firefox (uses only a single TCP connection) it starts fast and the speed tanks until it tops out around 100 KB/s to 350 KB/s. I've checked the internal network and it doesn't seem to have any problems. Everything goes through a 100 Mbit switch. I've also run iperf both internally (from the router to my desktop) and externally (from my desktop to a Linux box I own out on the net) and haven't seen any problems. It tops out around 1 MB/s like it should. Speedtest.net also reports 10 Mbits speeds. The load on the Linux machine is around 0.00, 0.00, 0.00 all the time, and it's got plenty of free RAM. It's an older laptop with a Pentium M 1.6 GHz processor and 1 GB of RAM. The internal network is connected to the built in Intel NIC and the cable modem is connected to a Netgear FA511 32-bit PCMCIA network card. I think the problem is with the packet forwarding in the router, but I honestly am not sure where the problem could be. Is there anything that would substantially slow down a single TCP stream?

  Read the article

• Making always-on-top windows follow the same MRU order as other windows

  - by nitro2k01

  Note: I'm using Windows 7 with the classical alt-tab style, ie the registry key AltTabSettings set to 1. I want to use MRU (most recently used) ordering of windows in the alt-tab list. However, because the windows are ordered in the Z order of the windows rather than actual MRU, this sometimes gives a different order after switching from an always-on-top application. Example: I have applications A, B and C open. A is set to always-on-top while the others aren't. A is focused. I now press alt-tab and application B is focused. I now press alt-tab but instead of application A receiving focus, application C does. Since A has a higher Z order, it's now left of application B, despite being the most recently used, and application C is placed right of B and is the one first getting focus by the cursor. To switch to application A, I need to press shift+alt-tab or cycle through all the other open windows. This is annoying when flicking focus back and forth between an always-on-top application and one that isn't always-on-top. Is there a way to make the alt-tab ordering strictly MRU?

  Read the article

< Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >