Search Results

Search found 45843 results on 1834 pages for 'network access'.

Page 467/1834 | < Previous Page | 463 464 465 466 467 468 469 470 471 472 473 474  | Next Page >

  • How do I configure networking on CentOS 6 running on hyper-v?

    - by LonelyLonelyNetworkN00b
    I'm not using legacy adapters, and i've installed Linux Integration Components 3.2. THe problem i'm facing is that the command 'setup' or 'system-config-network' doesn't list any network interfaces. If i run ifconfig -a i can see both the network cards i've attached. By setting a ip using ifconfig i can get network connectivity. The problem is that it's not persistent after a reboot. I'm a 100% centos newbie, but I figure it has something to do with that the centos installer couldn't see the NICs on install. How can I fix this?

    Read the article

  • Untangle VPN setup, how to see internal addresses?

    - by NFS user
    So Untangle is setup as the default gateway at 192.168.100.1/24, it is the authorative DHCP server issuing addresses from 192.168.100.100 to 192.168.100.200 and is successfully connected to the Internet. Untangle uses OpenVPN for remote access. Accessing the VPN gives me the address 192.168.40.5. However, I cannot ping any machines on the internal 192.168.100.x network remotely. Clearly, there is something basic that I am missing. What is it and how is it solved? Update: The VPN was not setup with the internal network. Since Untangle only allows editing the VPN setup once, the VPN had to be removed and reinstalled with the internal network exported. Now it works. The lesson is that the internal network must be setup before configuring the VPN.

    Read the article

  • Unable to connect to Windows VPN from iPad

    - by Justin
    I have a 16 GB iPad wifi I can't get to connect to VPN. The error I get is: "A connection could not be established to the PP server. Try reconnecting. If the problem continues, verify your settings and contact your Administrator." I have tried a variety of tasks to troubleshoot the issue: I have verified that another iPad on another network can connect to the VPN I am trying to connect to I can connect to this VPN from the same network the iPad uses on a Windows machine I have verified an iPhone user can connect to this VPN from a different network I have reset the iPad's network settings I have reset the entire iPad and restored settings I have compared my settings w/ a screenshot from the iPad that works and confirmed everything is correct I have used the IP address and domain name of our VPN server in the settings I have tried deleting the VPN settings in the iPad and recreating them I have verified in the logs of VPN server that I'm not even getting to the VPN server (no log entry) I have verified that I cannot VPN from the iPad on separate network (different ISP and router) Are there any other ways to troubleshoot VPN on an iPad?

    Read the article

  • bridge to share WiFi internet connection over eth0

    - by rubo77
    In this script there is implemented that you create a mesh network and connect other machines to your device to serve an internet connection with dhcp: echo "starting bridge to share internet connection over eth0" ifconfig eth0 up promisc brctl addbr br-freifunk brctl addif br-freifunk bat0 brctl addif br-freifunk eth0 echo "internet starting, this may take some minutes due to latency..." echo "(use" echo "tail -f /var/log/syslog" echo "in another window for debugging)" echo echo dhclient br-freifunk echo "The error 'Rather than invoking init scripts through /etc/init.d...' can be ignored:" dhclient br-freifunk # without bridge: dhclient bat0 This works fine with the freifunk-mesh network. But how can I serve internet in a normal case? I would like to connect to any open Wifi I find with my network-manager or wicd (yes, with the graphical GUI) and then start a small script that creates a bridge to my network-out on my laptop I use Ubuntu and my networkcards are eth0 and wlan0

    Read the article

  • PeopleSoft New Design Solves Navigation Problem

    - by Applications User Experience
    Anna Budovsky, User Experience Principal Designer, Applications User Experience In PeopleSoft we strive to improve User Experience on all levels. Simplifying navigation and streamlining access to the most important pages is always an important goal. No one likes to waste time waiting for pages to load and watching a spinning glass going on and on. Those performance-affecting server trips, page-load waits and just-too-many clicks were complained about for a long time. Something had to be done. A few new designs came in PeopleSoft 9.2 helping users to access their everyday work areas easier and faster. For example, Dashboard and Work Center aggregate most accessed information sections on a single page; Related Information allows users to complete transaction-related-research without interrupting a transaction and Secure Search gets users to a specific page directly. Today we’ll talk about the Actions menu. Most PeopleSoft pages are shared between individual products and product lines. It means changing the content on a single page involves Oracle development and quality assurance time for making and testing the changes. In order to streamline the navigation and cut down on accessing PeopleSoft pages one-page-at-a-time, we introduced a new menu design. The new menu allows accessing shared pages without the Oracle development team making any local changes, and it works as an additional one-click-path to specific high-traffic actionable pages. Let’s look at how many steps it took to Change Salary for an employee in HCM 9.1 before: Figure 1. BEFORE: The 6 steps a user would take to Change Salary in PeopleSoft HCM 9.1 In PeopleSoft 9.1 it took 5 steps + page loading time + additional verification time for making sure a correct employee is selected from the table. In PeopleSoft 9.2 it only takes 2 steps. To complete Ad Hoc Change Salary action, the user can start from the HCM Manager's Dashboard, click the Action menu within a table, choose a menu option, and access a correct employee’s details page to take an action. Figure 2. AFTER: The 2 steps a user would take to Change Salary in PeopleSoft HCM 9.2 The new menu is placed on a row level which ensures the user accesses the correct employee’s details page. The Actions menu separates menu options into hierarchical sections which help to scan and access the correct option quickly. The new menu’s small size and its structure enabled users to access high-traffic pages from any page and from any part of the page. No more spinning hourglass, no more multiple pages upload. The flexible design fits anywhere on a page and provides a fast and reliable path to the correct destination within the product. Now users can: Access any target page no matter how far it is buried from the starting point; Reduce navigation and page-load time; Improve productivity and reduce errors. The new menu design is available and widely used in all PeopleSoft 9.2 product lines.

    Read the article

  • How to get rid of NAT in a LAN?

    - by Alberto
    Currently the LAN I manage is organized as follows: internal network (192.168.1.0) which uses a Linux server as a gateway (internal address on interface br0 192.168.1.1, external address on interface br1 10.0.0.2) through NAT; then the 10.0.0.0 network has another gateway (10.0.0.1) which through another NAT connects the whole thing to the internet. What I would like to achieve is to configure the Linux server so that the first layer of NAT is no more necessary, so that for example a computer in the 10.0.0.0 network can ping every computer in the 192.168.1.0 network. I deleted this iptables rule: iptables -t nat -A POSTROUTING -o br1 -j SNAT --to-source 10.0.0.2, but of course now computers on 192.168.1.0 cannot reach the internet; ip forwarding is of course enabled. What's missing here? Thanks

    Read the article

  • Tidying up old apache logs managed by vlogger

    - by Andre Lackmann
    We're using vlogger to manage our apache logs which keeps everything nice and neat but pretty much breaks the ability to use logrotate from as far as I can see. eg. our virtual access.logs each sit within their own dir and are named similar to: /virtual.com/ 20100501-access.log 20100502-access.log 20100503-access.log 20100504-access.log etc.. Has anyone created a cleanup script to go through the /var/log/httpd/ sub dirs and remove old logs? We like using vlogger, but cleaning up olds logs after it is a pain!

    Read the article

  • Ubuntu 10.04 Windows2003 adding a route for GPO assignment

    - by David Carvalho
    I want the PC's that receive IP from my Ubuntu DHCP3-server to be able to retrieve the GPOs that are on my windows 2003 server. I'm using virtualbox and 3 virtual machines: 1 windows 2003 server 192.168.0.2 with 1 NIC (internal network). 1 ubuntu server 10.04 lts 192.168.0.1 with 1 NIC (internal network) and 3 aliases 192.168.21.0, 192.168.22.0, 192.168.100.0 1 Windows XP machine with 3 NIC's (internal network).

    Read the article

  • Why does my Mac address reset after reconnecting?

    - by Mr.Student
    I have ubuntu 12. I'm changing my mac address with ifconfig wlan0 hw ether xx:xx:xx:xx:xx:xx which works. However when I restart my connection my computer resets my mac to my original mac address. I'm guessing that this happens because something calls... ifconfig wlan0 down ... do something before connecting ifconfig wlan0 up ... connect to designated access point I want my mac address to however be the same no matter how many times I disconnect and reconnect, whether to another network or the same one. Also it would be nice to turn off the auto-connect feature for my network-manager with out having to edit each individual connection. Lastly I would like to know how to connect to a wifi network through the terminal and not via gui network manager ubuntu provides.

    Read the article

  • How to Set Up a Hadoop Cluster Using Oracle Solaris (Hands-On Lab)

    - by Orgad Kimchi
    Oracle Technology Network (OTN) published the "How to Set Up a Hadoop Cluster Using Oracle Solaris" OOW 2013 Hands-On Lab. This hands-on lab presents exercises that demonstrate how to set up an Apache Hadoop cluster using Oracle Solaris 11 technologies such as Oracle Solaris Zones, ZFS, and network virtualization. Key topics include the Hadoop Distributed File System (HDFS) and the Hadoop MapReduce programming model. We will also cover the Hadoop installation process and the cluster building blocks: NameNode, a secondary NameNode, and DataNodes. In addition, you will see how you can combine the Oracle Solaris 11 technologies for better scalability and data security, and you will learn how to load data into the Hadoop cluster and run a MapReduce job. Summary of Lab Exercises This hands-on lab consists of 13 exercises covering various Oracle Solaris and Apache Hadoop technologies:     Install Hadoop.     Edit the Hadoop configuration files.     Configure the Network Time Protocol.     Create the virtual network interfaces (VNICs).     Create the NameNode and the secondary NameNode zones.     Set up the DataNode zones.     Configure the NameNode.     Set up SSH.     Format HDFS from the NameNode.     Start the Hadoop cluster.     Run a MapReduce job.     Secure data at rest using ZFS encryption.     Use Oracle Solaris DTrace for performance monitoring.  Read it now

    Read the article

  • Using Folder Redirection GPO and Offline Files and Folders

    - by user132844
    I want to use Folder Redirection to redirect user's My Documents to a network share. First question is: What is best practices for mapping the drive? Should I use the profile tab in AD with the %username% variable, or a net use logon script, or something else? Second question is: How do I deal with laptops and syncing the network with the local storage? I want to have 2-way syncing so if they manually map their networked home drive and edit it from a different computer, it will sync the newer version to their My Documents folder the next time they connect their normal work computer. I also want to be sure that if they edit a file offline on their laptop while away from the office, that the network version syncs the changes the next time they connect that laptop. Please advise best practices for this scenario in a 2008 R2/Win7 environment. I am also interested in Mac clients for this environment, and while I am very Mac savvy, I would like to hear what others consider to be best practices for Mac network homedirs in a Win environment.

    Read the article

  • ASA 5505 8.4 open ports for subnet

    - by fwrawx
    I have an ASA 5505 running 8.4 with its outside interface plugged into our internal network. I want to open up access to hosts on one of the vlans behind that ASA to hosts on our internal network. I was just starting to grasp NAT on our older PIX but the ASA 8.4 has me confused now. Given a clean ASA with an outside vlan of 10.0.0.1/24 and test vlan of 10.0.1.1/24 what's the basic configuration needed to allow any hosts on the outside network to have access to any of the hosts on the test network?

    Read the article

  • wireless blocked after installing ubuntu 12.04

    - by Cornelia Frank
    I am using a lenovo S10-3 ideapad; had no problems with earlier version of ubuntu, only since installing 12.04. Have looked through many of the questions on the same issue and tried potential solutions but cannot seem to solve my problem. The hardware switch is in 'on' position and the wireless light comes on very briefly (2-3 sec) when the laptop starts up but then goes off and stays off. Pressing FN+F5 does nothing at all. I'd be grateful for any assistance. Cornelia Have received the following responses in Terminal: cf@cf-Lenovo:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes cf@cf-Lenovo:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. cf@cf-Lenovo:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: 00:26:9e:ee:7f:4c size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=10.0.1.8 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0520000-f0520fff memory:f0510000-f051ffff memory:f0540000-f055ffff *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 01 serial: c4:17:fe:f8:bc:d7 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:f0100000-f010ffff WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

    Read the article

  • Anonymous Login attemps from IPs all over Asia, how do I stop them from being able to do this?

    - by Ryan
    We had a successful hack attempt from Russia and one of our servers was used as a staging ground for further attacks, actually somehow they managed to get access to a Windows account called 'services'. I took that server offline as it was our SMTP server and no longer need it (3rd party system in place now). Now some of our other servers are having these ANONYMOUS LOGIN attempts in the Event Viewer that have IP addresses coming from China, Romania, Italy (I guess there's some Europe in there too)... I don't know what these people want but they just keep hitting the server. How can I prevent this? I don't want our servers compromised again, last time our host took our entire hardware node off of the network because it was attacking other systems, causing our services to go down which is really bad. How can I prevent these strange IP addresses from trying to access my servers? They are Windows Server 2003 R2 Enterprise 'containers' (virtual machines) running on a Parallels Virtuozzo HW node, if that makes a difference. I can configure each machine individually as if it were it's own server of course... UPDATE: New login attempts still happening, now these ones are tracing back to Ukraine... WTF.. here is the Event: Successful Network Logon: User Name: Domain: Logon ID: (0x0,0xB4FEB30C) Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: REANIMAT-328817 Logon GUID: - Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: 94.179.189.117 Source Port: 0 For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Here is one from France I found too: Event Type: Success Audit Event Source: Security Event Category: Logon/Logoff Event ID: 540 Date: 1/20/2011 Time: 11:09:50 AM User: NT AUTHORITY\ANONYMOUS LOGON Computer: QA Description: Successful Network Logon: User Name: Domain: Logon ID: (0x0,0xB35D8539) Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: COMPUTER Logon GUID: - Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: 82.238.39.154 Source Port: 0 For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Read the article

  • Laptop is Switching DNS Servers

    - by Steffan Harris
    Ok sometime ago I changed my ip address to a static one because I was bored and I wanted to learn more about static ips. I am running windows xp. My laptop works find on the network that i set up a static ip address, but when i go to another network, the incorrect dns servers are being used. When I enter the option to get a dns server automatically, the internet connection works but only for a short time. After that the dns servers resets to the one i entered manually on a previous network. I did this by going to Network Connection-Right Click Local Area Connection and go to properties-Select TCP/IP - then click the Properties button. At this point i am given the option to Obtain an ip address or obtain and address automatically. My question is how do I resolve this problem of the dns server reseting to the previous one.

    Read the article

  • Manual NAT on Checkpoint (Redirect all http requests to a local web server)

    - by kulakli
    Hi, We have a proxy server in internal network and I want to redirect all internet http requests to a web server in local network. It'll be like a Network Billboard that say "No direct connection is available. Set up your proxy etc." For example: A user starts the computer Opens the browser Trys to open www.google.com Should see web server output on local network Trys another web site on internet Should see web server output on local network Sets up proxy Trys to connect to a web site Web site should be loaded I have added a simple manual NAT rule to address translation in Checkpoint firewall but it simply does not work. Here is my address translation rule Source Destination Service T.Source T.Destination T.Service MY_PC A_GOOGLE_IP ALL ORIGINAL INT_WEB_SRV ORIGINAL Then when I ping A_GOOGLE_IP, replies come from INT_WEB_SRV, as I expected. However, when I try to connect A_GOOGLE_IP from browser (http://A_GOOGLE_IP), No replies come from SYN_SENT and falls into timeout. When I look at the firewall log of INT_WEB_SRV, I can see the incoming connection requests from MY_PC is accepted and NO denies. By the way, there is no problem to see INT_WEB_SRV (http://INT_WEB_SRV) from browser. My understanding is, my nat rule at checkpoint NGX R60 does not include return packets. I definitely need some help. Regards, Burak

    Read the article

  • Microsoft CALs for Domain Controller

    - by Damo
    I am designing a network and I've come to the point of specifying out the number of CALs required for this network. Microsoft licensing has always confused me, it's just not always clear to me. I plan to have 1 2008 std domain controller, another 2008 server (not a domain controller) and 200 Windows 7 devices connected to the domain for domain services. The 200 W7 devices will all authenticate to the domain controller with the same domain account. (this is a special type of network, not a user workstation network) Therefore, do I need to purchase 200 CALS for the 200 devices, or can I purchase say 10 CALS (user CALS) as the amount of unique user accounts is very low. Many thanks for looking.

    Read the article

  • MPLS basic configuration

    - by Vineet Menon
    I want to test out MPLS VPN in my lab. I have 3 routers. 2 PEs and 1P router, all cisco 2921. Something like this, ----- ---- ----- | PE1 |.1____192.168.1.0____.2| P |.2____192.168.2.0____.1| PE2 | | | | | | | ----- ---- ----- lo0:10.1.1.1 lo0:10.1.1.2 lo0:10.1.1.3 Here's the configuration file for each of them, PE1 router hostname PE1 ! no ipv6 cef ip source-route ip cef ! ! ! ip vrf cust1 rd 100:100 route-target export 100:100 route-target import 100:100 ! ! interface Loopback0 ip address 10.1.1.1 255.255.255.255 ! interface GigabitEthernet0/0 ip address 192.168.1.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 ip vrf forwarding cust1 ip address 172.16.1.1 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.1 0.0.0.0 area 0 network 192.168.1.0 0.0.0.255 area 0 ! router bgp 100 bgp log-neighbor-changes neighbor 10.1.1.3 remote-as 100 neighbor 10.1.1.3 update-source Loopback0 neighbor 172.16.1.2 remote-as 65001 ! address-family vpnv4 neighbor 10.1.1.3 activate neighbor 10.1.1.3 send-community extended exit-address-family For P router: hostname P ! no ipv6 cef ip source-route ip cef ! interface Loopback0 ip address 10.1.1.2 255.255.255.255 ! interface GigabitEthernet0/1 ip address 192.168.1.2 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/2 ip address 192.168.2.2 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.2 0.0.0.0 area 0 network 192.168.1.0 0.0.0.255 area 0 network 192.168.2.0 0.0.0.255 area 0 ! For PE2 router: ! hostname PE2 ! no ipv6 cef ip source-route ip cef ! ! ! ip vrf cust1 rd 100:100 route-target export 100:100 route-target import 100:100 ! ! ! interface Loopback0 ip address 10.1.1.3 255.255.255.0 ! interface GigabitEthernet0/0 ip address 192.168.2.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 ip vrf forwarding cust1 ip address 172.16.2.1 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.3 0.0.0.0 area 0 network 192.168.2.0 0.0.0.255 area 0 ! router bgp 100 bgp log-neighbor-changes neighbor 10.1.1.1 remote-as 100 neighbor 10.1.1.1 update-source Loopback0 neighbor 172.16.2.2 remote-as 65001 ! address-family vpnv4 neighbor 10.1.1.1 activate neighbor 10.1.1.1 send-community extended exit-address-family ! I am following this article form cisco. But things are not working properly. Any help would be appreciated.

    Read the article

  • Trouble opening my router to my web server

    - by Justin Heather Barrios
    Here's the story. I have a webs server created and connected to my router. The website works great when I'm connected to the router, but when I'm off the network I can't access the website. I got the IP for my router by googling "what is my ip." I have opened ports 80 to 10080 to link to the server in the router. One odd thing that I don't understand. When I am in network if I access XXX.XXX.XX.XX:80 I can access the web page no problem. If I access XXX.XXX.XX.XX:81 (or any other port) I get the error "Cannot access server." Any idea what the problem could be? Could it be my ISP?

    Read the article

  • What type of pattern would be used in this case

    - by Admiral Kunkka
    I want to know how to tackle this type of scenario. We are building a person's background, from scratch, and I want to know, conceptually, how to proceed with a secure object pattern in both design and execution... I've been reading on Factory patterns, Model-View-Controller types, Dependency injection, Singleton approaches... and I can't seem to grasp or 'fit' these types of designs decisions into what I'm trying to do.. First and foremost, I started with having a big jack-of-all-trades class, then I read some more, and some tips were to make sure your classes only have a single purpose.. which makes sense and I started breaking down certain things into other classes. Okay, cool. Now I'm looking at dependency injection and kind of didn't really know what's going on. Example/insight of what kind of heirarchy I need to accomplish... class Person needs to access and build from a multitude of different classes. class Culture needs to access a sub-class for culture benefits class Social needs to access class Culture, and other sub-classes class Birth needs to access Social, Culture, and other sub-classes class Childhood/Adolescence/Adulthood need to access everything. Also, depending on different rolls, this class heirarchy needs to create multiple people as well, such as Family, and their backgrounds using some, if not all, of these same classes. Think of it as a people generator, all random, with backgrounds and things that happen to them. Ageing, death of loved ones, military careers, e.t.c. Most of the generation is done randomly, making calls to a mt_rand function to pick from most of the selections inside the classes, guaranteeing the data to be absolutely random. I have most of the bulk-data down, and was looking for some insight from fellow programmers, what do you think?

    Read the article

  • ip routing policy in linux

    - by Dragos
    I have a linux system with two network interfaces (eth0 in x.x.x.0 and eth1 in x.x.y.0). Is there any posibility to add some route policy to send all the traffic to network x.x.y.0. I would like even the traffic from eth0 to be send to eth1's network. I cannot delete the direct connected networks from the routing table so all the traffic from x.x.x.0 network is send to eth0. I would like to send all traffic to eth1.

    Read the article

  • Oracle Open World / Public Sector / Identity Platform

    - by user12604761
    For those attending Oracle Open World (Oct. 1st - 3rd, 2012 at the Moscone Center in San Francisco), the following details are recommended:  OOW Focus on Public Sector. Also, Oracle's foundational Identity and Access Management and Database Security products that support government security ICAM solutions are covered extensively during the event, the following will be available: The focus is on Oracle's Modern Identity Management Platform.   Integrated Identity Governance Mobile Access Management Complete Access Management Low Risk Upgrades The options for attendees include 18 sessions for Identity and Access Management, 9 Identity and Access Management demonstration topics at the Identity Management Demo Grounds, and 2 hands on labs, as well as 21 database security sessions. Oracle Public Sector Reception at OOW:  Join Oracle's Public Sector team on Monday, October 1 for a night of food and sports in a casual setting at Jillian’s, adjacent to Moscone Center on Fourth Street. In addition to meeting the Public Sector team, you can enjoy Monday Night Football on several big screen TVs in a fun sports atmosphere. When: Monday, October 1, 6:30 p.m.–9:30 p.m. Where: Jillian's, 101 Fourth Street, San Francisco 

    Read the article

  • Why is my iPhone WIFI so slow at home?

    - by John Fouhy
    When my iPhone is connected to my home wireless network, the internet is unusably slow. I installed the speedtest.net application; here are some results from tonight: Down: 0.0kB/s, Up: 0.0kB/s, ping: 2230ms Down: 2.5kB/s, Up: 40.5kB/s, ping: 2182ms Down: 0.0kB/s, Up: 20.0kB/s, ping: 197ms For comparison, here is the result from my iMac to the same server, which is on the same wireless network (and has no wired connection): Down: 139kB/s, Up: 53.8kB/s, ping: 182ms Neither my iMac nor the Dell laptop also on the network have experienced the wifi problems I get with my iPhone. On the other hand, I tried browsing a website on the wireless network at work with no problems. EDIT: SpeedTest at work gives me 156kB/s down. EDIT2: Girlfriend (owner of the Dell) reports actually the internet is sometimes very slow. Perhaps there is more going on. No problems with my iMac. My router is a ASUS WL-500g Premium V2 running OpenWrt Kamikaze with X-Wrt Extensions 8.09.

    Read the article

  • Local IP address same as Google's external

    - by GRIGORE-TURBODISEL
    I'm exampling Google's IPs, but you get the idea. What happens if somebody configures a router's LAN address pool to range from 62.231.75.2 to 62.231.75.255, then his computer's IP address to 62.231.75.232 and someone else on the network tries to access Google? Or better off, is there any case in which someone in that network can, by merely attempting to access Google, accidentally bump into another computer on the network?

    Read the article

< Previous Page | 463 464 465 466 467 468 469 470 471 472 473 474  | Next Page >