Search Results

Search found 16987 results on 680 pages for 'second'.

Page 467/680 | < Previous Page | 463 464 465 466 467 468 469 470 471 472 473 474  | Next Page >

• Implementing an isolated guest WLAN via IPSec VPN on Windows

  - by sysadmin1138

  We are attempting to set up a guest WLAN network that is isolated from the rest of our network. This is proving difficult due to a couple of technical reasons. My first choice was to use a separate VLAN, on which our Firewall's handy WLAN port would handle DHCP, DNS and the network isolation we need. Unfortunately, due to the fact that our main office and our Internet connection itself are in different locations connected by way of a Metro Ethernet connection, I'm at the mercy of our ISP for VLAN transit. They won't pass a second VLAN between our two sites. And my hardware doesn't support 802.1ad "Q-in-Q", which would also solve this problem. So I can't use the VLAN method for isolation. At least not without spending money. As our Firewall can handle IPSec site-to-site VPN connections, I hope it is possible to connect a Server 2008R2 (standard) server I have in the office location to the WLAN and provide gateway services to the firewall. Thusly: Unfortunately, I don't know if it is possible to connect the two this way. The firewall has a pretty flexible IPSec/L2TP implementation (I've used it to connect iPads in the wild), but is neither Kerberized or supports NTLM. The Connection Security Rules view on the Windows server seems to get close to what I think needs to be done, but I'm failing on figuring out how to get it to do what I need it to do. Is this even possible, or do I need to pursue alternate solution?

  Read the article

• Isolating a computer in the network

  - by Karma Soone

  I've got a small network and want to isolate one of the computers from the whole network. My Network: <----> Trusted PC 1 ADSL Router --> Netgear dg834g <----> Trusted PC 2 <----> Untrusted PC I want to isolate this untrusted PC in the network. That means the network should be secure against : * ARP Poisoning * Sniffing * Untrusted PC should not see / reach any other computers within the network but can go out the internet. Static DHCP and switch usage solves the problem of sniffing/ARP poisoning. I can enable IPSec between computers but the real problem is sniffing the traffic between the router and one of the trusted computers. Against getting a new IP address (second IP address from the same computer) I need a firewall with port security (I think) or I don't think my ADSL router supports that. To summarise I'm looking for a hardware firewall/router which can isolate one port from the rest of the network. Could you recommend such a hardware or can I easily accomplish that with my current network?

  Read the article

• I can't get my PC to start up by a normal way.

  - by ssice

  I couldn't write a more accurate title. I am just unable to start the computer by pressing the Power On button. I checked the Power Supply and it seems to give good voltage values in every pin. And this is not a BIOS malfunction because of bad overclocking or anything that may come to your mind. And I will tell you why. It happens that EPS (or any ATX-based) power supply has the ability to be powered-on by the Motherboard by jumping the 13th pin of the 24-pin-ATX-connector to COM/GND. I did it, after pushing the power on button (without any visual response) and, pwhaa! The machine turned on. I was able to read (and even write, if I wanted) BIOS values and then start any OS installed. Machine starts, so it's not any kind of misconfiguration. It seems some hardware related. I am able to power the machine on only if I already pushed the power on button. Though pushing it without jumping the 13th pin to ground for a second does not power the machine. Of course, jumping the pin without pushing the power on button does not tell the motherboard anything, so the computer would not start up either. It's as if the logic that connects the power button with the 13th pin derivation to GND was unable to be activated. What can be the issue? How can I solve it? My configuration is as follows: CPU: AMD Phenom 9850 X4 Black Edition MB: ASUS Formula II AM2 RAM: 2x2GB Corsair Dominator 5-5-5-15 2T @ 1066MHz DDR2 Tested also with only 1 module GPU: 2x XFX nVIDIA GeForce 9600 GT XxX Alpha Dog Edition @ Core: 540Mhz [SLi] Power Supply: Xilence 700W (ATX 12V 2.3 / EPS 12V 2.92 compatible) PS: I know the machine is like 2 years old. I hardly use it now, but my parents do.

  Read the article

• Please help to find a solution for two way, real-time synchronization on Centos 5.5 64Bit

  - by Vipul Limbachiya

  I am in need of a real time, two way synchronization software for Centos 5.5 / 64Bit. Here's little explanation: It needs to be able to perform: Two way synchronization. It must be realtime. By realtime means it can be almost realtime, i.e. a delay of 1 second for example is fine. And the folders are on the same server. I am currently using GlusterFS across two webservers. However, it has extremely poor small file read performance and it's slowing down my website. There's nothing more that can be done to improve this, I have already tested many configurations. As a solution, I was going to mount a RAM drive (tmpfs) that mirrors the GlusterFS web files but get the webserver to use the RAM drive. The issue is that I need two way realtime mirroring or replication between glusterfs and the RAM drive. I need this is as Apache writes files as wells. As I said, realtime two way synchronization across two folders. Which are in fact 2 different mounts points. The RAM (tmpfs) mount poing and the GlusterFS mount point. I already know about: Rsync - Which is one way Unison - Which is not realtime Please suggest me any solution free or paid. Thanks in advance

  Read the article

• Apache proxy: Why is one vhost returning Forbidden while the other one works?

  - by Stefan Majewsky

  I have a Java application that needs to talk to another intranet website using HTTPS in both directions. After fighting with Java's SSL implementations for some time, I gave up on that, and have now set up an Apache that's supposed to act as a bidirectional reverse proxy: external app ---(HTTPS request)---> Apache ---(local HTTP request)---> Java app This direction works just fine, however the other direction does not: Java app ---(local HTTP request)---> Apache ---(HTTPS request)---> external app This is the configuration for the vhost implementing the second proxy: Listen 127.0.0.1:8081 <VirtualHost appgateway:8081> ServerName appgateway.local SSLProxyEngine on ProxyPass / https://externalapp.corp:443/ ProxyPassReverse / https://externalapp.corp:443/ ProxyRequests Off AllowEncodedSlashes On # we do not need to apply any more restrictions here, because we listened on # local connections only in the first place (see the Listen directive above) <Proxy https://externalapp.corp:443/*> Order deny,allow Allow from all </Proxy> </VirtualHost> A curl http://127.0.0.1:8081/ should serve the equivalent of https://externalapp.corp, but instead results in 403 Forbidden, with the following message in the Apache error log: [Wed Jun 04 08:57:19 2014] [error] [client 127.0.0.1] Directory index forbidden by Options directive: /srv/www/htdocs/ This message completely puzzles me: Yes, I have not set up any permissions on the DocumentRoot of this vhost, but everything works fine for the other proxy direction where I haven't. For reference, here's the other vhost: Listen this_vm_hostname:443 <VirtualHost javaapp:443> ServerName javaapp.corp SSLEngine on SSLProxyEngine on # not shown: SSLCipherSuite, SSLCertificateFile, SSLCertificateKeyFile SSLOptions +StdEnvVars ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ ProxyRequests Off AllowEncodedSlashes On # Local reverse proxy authorization override <Proxy http://localhost:8080/*> Order deny,allow Allow from all </Proxy> </VirtualHost>

  Read the article

• Finding Bluetooth link key in Windows 7, to double pair a device on dualboot computer

  - by Ilari Kajaste

  How can I dig up the Bluetooth link key for a paired device in Windows 7? Is this something that is dependent on the Bluetooth stack I'm using (Toshiba), or is there a generic place to store these in Windows 7? Note: I'm not talking about the six-digit code usually typed by the user during pairing - that is worthless since it's discarded after pairing process. What I mean is the 128-bit link key that the devices exchange during pairing, and use thereafter to encrypt all their Bluetooth traffic. Background: I dualboot Windows 7 / Ubuntu on my laptop, and I would like to have my phone paired to both OS's. Since the dualbooting computer has only one Bluetooth adapter and thus only one Bluetooth address, I cannot do two pairings to the phone, since on the second pairing (Windows) the phone just replaces the previous pairing (Linux) to the same Bluetooth address. A thread on Ubuntu forums pointed me to what I have to do - pair first on Linux, then on Windows, and then replace the link key on Linux side with the one Windows negotiated. I can find the Linux side pairing key from /var/lib/Bluetooth/[BD_ADDR]/linkkeys - no problems there. However, on Windows side I can't find the key. According to the forum post, on Windows side the key should be in SYSTEM\ControlSet002\services\BTHPORT\Parameters\Keys\[BD_ADDR] but while that registry key does exist, it has no subkeys. (And a similar registry path in ControlSet001 didn't have any subkeys either.) One thing I've been instructed to do is to capture all events during pairing with Sysinternals Process Monitor. I did this, but I haven't been able to find any useful information from the captured events, not even by exporting the data to a huge XML and grepping that with the BD_ADDRs (with or without colons). So how could I find the link key for a paired device in Windows 7? Some reference information: Wikipedia: Bluetooth, Security Now: Bluetooth security

  Read the article

• Reference entire excel 2007 sheet to another sheet

  - by Keikoku

  I have one sheet with 100 rows of data. I have a second sheet that will use the same data but with filters applied. In fact, I will have a dozen sheets, each with different filters. My goal is to have references from the every sheet to the first so that prior to filtering, they all contain exactly the same data. This way I only have to modify one sheet and all sheets will reflect the changes. The purpose is to create external links from word to excel to display specific rows, but there appears to be a limitation to linking where it displays absolutely everything that you see on the sheet itself (and each view must be different). I can manually reference the first cell and then drag the black box to easily expand it to the required number of rows, but that would require me to go into each sheet and drag the black box again whenever I add new entries to the master copy. Is there an easy way to do this? Note that the issue is the same as Easy way for users to update linked documents Excel 2007, except this time I am using a different approach. Solutions to both would be welcome.

  Read the article

• Why is my hg workbench & Adobe Reader toolbar icon a blank white page?

  - by Zasurus

  On my work's PC (windows 7 32bit) all Adobe Reader and hg Workbench icons on the toolbar (and general shortcuts for hg workbench) are just white pages (with the top left corner folded over). If you right click on the toolbar icon then right click on "TortoiseHg Workbench"(for hg workbench) then "Properties" then the "Change Icon..." button is greyed out (same for "Adobe Reader X"). Also the "Target:" is "TortoiseHg 2.4.0 (x86)" and is greyed out also the "Open File Location" is greyed out. This is the same for both Hg Workbench and Adobe Reader and seems to be the only thing that connects them. I have tried reinstalling to no avail. I also have local admin rights on the PC. I finally I have tried the following following questions without any luck (they aren't quite relevant to my issue but close): Adobe Reader program icon and pdf icons don't appear in Windows 7 Adobe PDF icon disappeared? Encase my description isn't enough to understand the issue here is a screenshot. As you can see the Hg Workbench icon (far left) and a pdf open in Adobe Reader X (second icon to from the left) are both blank and the shortcut is mainly greyed out.

  Read the article

• Two monitors with Mac Mini - one displays black despite receiving a signal

  - by alex

  My Mac Mini outputs to my two new monitors - Dell U2311Hs. The LED on the bezel displays blue when receiving a signal, or yellow otherwise. Both screens are displaying blue. It also seems my Mini can see both of them... However, one of them is black. It just displays black, but appears to be receiving a signal (when I turn the Mac off, it then displays No Signal). To make things weirder, on startup, the boot up (white with Apple logo) appears on the right monitor (the one that now displays black). Occasionally, it flickers up on the black screen for 1 second. I have tried Detect Displays. It appears to do nothing. I'm also running a dual monitor KVM. Video connections are DVI-D. How can I fix this situation? Thanks. Update This is the weirdest thing - I used the DVI-D cable that came with the KVM and it seems to have fixed it - I didn't both because it looks identical to any other DVI cable (in form an pin out). So, I will accept an answer if someone can tell me what may be the difference in these cables?

  Read the article

• sbs-server with 2 nics and 2 connections to the internet with different providers not working as it

  - by erik-van-gorp

  We have the following configuration : A sbs-2003 server in a domain (mydomain.com) with 2 network cards, each connected to a different network (provider), with different gateways, one for web and one for mail and clients. (we do this because the bandwitdh we get from our providers is too small to handle all the mail(+spam) traffic and webservices, so we took 2 providers) DNS is as follows : www.mydomain.com 1.2.3.4 mail.mydomain.com 5.6.7.8 NIC 1(192.168.1.3) is connected to to the internet through a firewall at 192.168.1.1, having wan address 1.2.3.4 NIC 2(10.0.0.3) is connected to to the internet through a firewall at 10.0.0.1, having wan address 5.6.7.8 Both nics have their default gateway installed at their corresponding routers. Also the metrics are set equal. (i know this isn't a supported config, but it works more or less). In this configuration i can use RDP on both wan adresses, and telnet to port 25 works as well on both. The issue now is that since a few weeks , we get regular disconnections, and website hickups(timeouts), several per hour. If we set one router to a higher metric, that route no longer works. In short, I want the mails to route through NIC2 and the web through NIC1. Any better configuration (without installing a second mail server) ?

  Read the article

• mkvmerge: How to merge two videos, one without audio?

  - by ProGNOMmers

  I have two videos, one without audio (the second). Trying to merge them I have this error: mkvmerge concat1.webm +concat2.webm -o output.webm mkvmerge v5.8.0 ('No Sleep / Pillow') built on Oct 19 2012 13:07:37 Automatically enabling WebM compliance mode due to output file name extension. 'concat1.webm': Using the demultiplexer for the format 'Matroska'. concat2.webm': Using the demultiplexer for the format 'Matroska'. 'concat1.webm' track 0: Using the output module for the format 'VP8'. concat2.webm' track 0: Using the output module for the format 'VP8'. concat2.webm' track 1: Using the output module for the format 'Vorbis'. No append mapping was given for the file no. 1 (concat2.webm'). A default mapping of 1:0:0:0,1:1:0:1 will be used instead. Please keep that in mind if mkvmerge aborts with an error message regarding invalid '--append-to' options. Error: The file no. 0 ('concat1.webm') does not contain a track with the ID 1, or that track is not to be copied. Therefore no track can be appended to it. The argument for '--append-to' was invalid. Is there a way to say to mkvmerge to make the audio track longer? Thank you!

  Read the article

• Autounmounting USB keys with FAT filesystem on Linux (RHEL5)

  - by niXar

  For security reasons, I have two workstations i front of me, and I can only transfer data between them through a USB key. As you can imagine, it can get quickly tiresome, but the most annoying is having to unmount the things before removing them. Not umounting them results in missing files most of the time, even if I remove them a while after having last written to them. Now, since they're only used for transferring smallish files, and each are basically written once and read once, I don't need the fancy pansy caching infrastructure that makes clean unmounting a necessary step. And since the data is always a copy of something I have at hand, I don't care if the filesystem croaks from time to time. But anyway the system doesn't need to force that on me, it could simply make sure everything is committed with a second, and works synchronously. Then when I remove the key, nothing is lost. Is there a way to do this? I would appreciate any other tips on handling this situation. Edit: it appears the situation has changed between RHEL5 and Fedora up to F11 on one hand, and F12 on the other. The latter use DeviceKit-disk, and I haven't quite figured out how to do this. The method provided below in gconf does not work anymore.

  Read the article

• why is Mac OSX Lion losing login/network credentials?

  - by Larry Kyrala

  (moved from stackoverflow...) Symptoms So at work we have OSX 10.7.3 installed and every once in a while I will see the following behaviors: 1) if the screen is locked, then multiple tries of the same user/pass are not accepted. 2) if the screen is unlocked, then opening a new bash term may yield prompts such as: `I have no name$` or lkyrala$ ssh lkyrala@ah-lkyrala2u You don't exist, go away! Even when our macs are working normally, everyone here has to login twice. The first time after boot always fails, but the second time (with the same password, not changing anything, just pressing enter again) succeeds. Weird? Workarounds There are some workarounds that resolve the immediate problem, but don't prevent it from happening again: a) wait (maybe an hour or two) and the problems sometimes go away by themselves. b) kill 'opendirectoryd' and let it restart. (from https://discussions.apple.com/thread/3663559) c) hold the power button to reset the computer Discussion Now, the evidence above points me to something screwy with opendirectory and login credentials. Some other people report having these login problems, but it's hard to determine where the actual problem is (Mac, or network environment?). I should add that most of the network are Windows machines, but we have quite a few Macs and Linux machines as well, but I'm not sure of the details of how the network auth is mapped from various domains to others... all I know is that our network credentials work in Windows domains as well as mac and linux logins -- so something is connecting separate systems, or using the same global auth system.

  Read the article

• Printer spooler service stop running when sent print job

  - by Hanan N.

  Every time i am sending a print job to the printer, i am don't get any response from the printer, and at the printer job list at the status of the job, i see that there was an Error, but it don't give me any clue on what could be the problem. After some investigation i found that every time that i send the print job to the printer the printer spooler service stops to run, then after a second or two it start again (i think that this behavior is related to the printer spooler settings to rerun it self after it stops). Things that i have tried so far: Remove and Install again the Driver. After removing the driver, i have removed the unnecessary registry keys according to this article from Microsoft, these are: Rename all files and folders in: c:\windows\system32\spool\drivers\w32x86 Remove anything but Drivers Print and Processors: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x86 Remove anything in here: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors but: BJ Language Monitor Local Port Microsoft Document Imaging Writer Monitor Microsoft Shared Fax Monitor Standard TCP/IP Port USB Monitor WSD Port Disconnect and Reconnect the Printer. Clean the computer from Viruses & Spywares. Currently i am stuck, i have no more things to try, if anybody know about any kind of solution please let me know about it. Since i am want to keep this post as general problem that relate to the printer spooler, and not just my particular problem, i didn't included inside the windows version & the printer model, they are (although i think that it isn't relate just for that particular model): Windows 7 32bit, HP Officejet 4500 G510g-m (connect to the computer via USB). Thanks.

  Read the article

• How to share text, pictures and video to restricted set of users

  - by joaoc

  I want to share pictures and videos of my kid growing up but I don't want it to be open to the public. I just want me and my wife to be able to add material and then share with grandparents and friends who would be given a username/password or some other solution that authenticates them. This content would preferably be available remotely over the internet or downloaded periodically to the allowed viewers computers. The second option most likely means they would have to install a client, which I am not too fond of doing (I would have to ask them to install it, help configure for different platforms, ...) I'm at the start but I would like software that also allows export of the data (if one day I want to migrate to a different solution). Folder sharing I don't know if Windows folder sharing is reliable, robust and safe enough to share over the internet. Dropbox could be a software solution, but it's limited to 2GB and requires receivers to also install and configure software. A folder is just a collection of files, so it would be harder to keep them organized with text describing the pictures/video Email I could email the content every now and then but videos are almost always too big to go as attachments This would also not provide a history of updates to anyone just recently joining in Are there other solutions to achieve this? NOTE: I also thought that software to run a local or remote blog could be an option but we aren't allowed to ask those questions on superuser because one admin doesn't like cloud-computing questions. But if you do think it's the best approach and can suggest a solution, do state it in the answers anyway!

  Read the article

• Windows Update and lsass.exe

  - by David

  I have a brand new installation of Windows XP (SP1 or older). I installed Norton AntiVirus, Firefox, Putty, and Cygwin. No other software is present. Windows Update finds the following 64 updates: KB905760, KB978262, Internet Explorer 8, KB71961, KB954155, KB968816, KB923561, KB950762, KB949402, KB950974, KB951376, KB951748, KB952004, KB952954, KB955069, KB956572, KB956802, KB956803, KB956844, KB958470, KB958869, KB959426, KB960803, KB960859, KB961501, KB969059, KB970238, KB970238, KB971032, KB971468, KB971657, KB972270, KB973507, KB973815, KB973904, KB974112, KB974318, KB974392, KB975025, KB975560, KB975561, KB975713, .......) When these updates are applied, the system reboots to a black screen with two error messages. The first error message says: lsass.exe - Application Error The application failed to initialize properly (0xc00000142). Click on OK to terminate the application. The second error message says: services.exe - Application Error The application failed to initialize properly (0xc00000142). Click on OK to terminate the application. I then proceed to boot into Safe Mode, use System Restore, and everything works fine again until the 64 updates re-appear in Windows Update. I can see two options: disable Auto-Updates or install each of the 64 updates one at a time until finding the troublesome update. Does anyone have any better ideas?

  Read the article

• connecting to server with multiple nics in other vlan

  - by Thierry

  I have a windows 2003 server with 3 nics on 3 vlan's (this is in domain 1). nic 1 has a default gateway to my router/firewall (sonicwall). In nic 2 and 3 I have left it empty, because it is advised like that everywhere. Within this domain and VLAN's 1-3 everything works fine. BUT... I have a second domain (domain 2) with a 4th Vlan (all 4 VLAN's connected to the same router/firewall) from which my clients need to access the 2003 server in domain 1 (it's my antivirus management console for both domains). when i ping the server from my vlan4 by it's FQDN, it randomly chooses ip from nic 1, 2 or 3 from my 2003 server. (logically because that server is know in DNS with it's 3 IP-addresses. And that is needed for my VLAN's 1-3) I don't really have a problem with that. BUT, I only get an answer of NIC1 (which sounds logically to me, because it's the only one with a gateway). It is not a router problem, because I'm testing in this phase and ping from vlan4 to any machine in vlan1, 2 or 3 that has 1 nic works just fine. If i add a gateway to nic2 and nic3, I get answer from all 3 nics and this works fine. But I know it's adviced to not do that. Can anyone give me advice in this particular case? Would it really be a problem to add a gateway to nic 2 and 3? They would be pointing to the same router/firewall (only with different ip-address, based on the vlan). Or is there another good solution to fix this problem? Thank's in advance, Thierry.

  Read the article

• What are the IR codes the new Apple Remote (alu) uses?

  - by index

  I would like to clone the new Apple Remote (infrared, second generation, aluminium) just for fun with a microcontroller. Most codes of the previous model can be found in the LIRC remote control database (all except the key combinations menu + <<,play, which unpair, change ID, pair the remote. I also don't know which bit encodes the battery status. It uses a modified 32 bit NEC protocol (reverse LIRC codes bytewise). But the new Apple remote uses two additional codes for the play and the new select button. I don't have a mac, so I can't brute force test codes either ;-) So if someone possesses such a remote and the ability of recording those two new buttons and three combinations I'd really appreciate it. If you can't run LIRC (or it gets confused by the new codes) and you don't have an oscilloscope or logic analyser, maybe you could hook up a photo diode to your sound input and record the codes with Audacity? Just hit record, hit each button and combo a few times, hit stop, upload the uncompressed WAV file to a sharing site, done. That'd be great!

  Read the article

• Slackware - Assigning routes (IP address ranges) to one of many network adapters

  - by Dogbert

  I am using a Slackware 13.37 virtual machine within VirtualBox (current). I currently have a number of Ubuntu VMs on a single server, along with this Slackware VM. All VMs have been set up to use "Internal Network" mode, so they are all on a private LAN, and can see each other (ie: share files amongst themselves), but they remain private from the outside world. On on the these VMs (the Slackware one), I need to be able to grant it access to both this private network, and the internet at large. The first suggestion I found for handling this is to add another virtual network adapter to the VM, then set it to NAT. This results in the Slackware VM having the following network adapter setup: -NIC#1: Internal Network -NIC#2: NAT I want to set up the first network adapter (NIC#1) to handle all traffic on the following subnets: 10.10.0.0/255.255.0.0 192.168.1.0/255.255.255.0 And I want the second virtual network adapter (NIC#2) to handle everything else (ie: internet access). May I please have some assistance in setting this up on my Slackware VM? Additionally, I have searched for similar questions on SuperUser and Stackoverflow, but they all seem to pertain to my situation (ie: they all refer to OSX, or Ubuntu via the use of some UI-based tool). I'm trying to do this on Slack specifically via the command-line. Thanks!

  Read the article

• How do I log back into a Windows Server 2003 guest OS after Hyper-V integration services installs and breaks my domain logins?

  - by Warren P

  After installing Hyper-V integration services, I appear to have a problem with logging in to my Windows Server 2003 virtual machine. Incorrect passwords and logins give the usual error message, but a correct login/password gives me this message: Windows cannot connect to the domain, either because the domain controller is down or otherwise unavailable, or because your computer account was not found. Please try again later. If this message continues to appear, contact your system administrator for assistance. Nothing pleases me more than Microsoft telling me (the ersatz system administrator) to contact my system administrator for help, when I suspect that I'm hooped. The virtual machine has a valid network connection, and has decided to invalidate all my previous logins on this account, so I can't log in and remotely fix anything, and I can't remotely connect to it from outside either. This appears to be a catch 22. Unfortunately I don't know any non-domain local logins for this virtual machine, so I suspect I am basically hooped, or that I need ophcrack. is there any alternative to ophcrack? Second and related question; I used Disk2VHD to do the conversion, and I could log in fine several times, until after the Hyper-V integration services were installed, then suddenly this happens and I can't log in now - was there something I did wrong? I can't get networking working inside the VM BEFORE I install integration services, and at the very moment that integration services is being installed, I'm getting locked out like this. I probably should always know the local login of any machine I'm upgrading so I don't get stuck like this in the future.... great. Now I am reminded again of this.

  Read the article

• Davical + LDAP + NTLM

  - by slavizh

  I have set up a Davical server on CentOS. I've configured it to use LDAP and the users use their usernames and passwords to authenticate to the Davical server. I am using Lightning as client software for calendaring. Using Lightning requires entering username and password everytime, so I decided to set NTLM. I want my users who are logging in the domain to use the calendar server trough Lightning without entering username and password. I've set up NTLM on the Davical server. But when a user trys to reach the calendar trough Lightning first the server asks for NTLM username and password and then ask for the LDAP username and password. It becomes something like double authentication. The problem is that NLTM requires domain\username and passowrd and Davical trough LDAP requires only username and password. So my questions are: Is there a way to change something in Davical so that Davical trough LDAP to requires domain\username and passwords authentication? That way may be trough NTLM the second authentication will proceed silently and the users will user Lightning without entering usernames and passwords Is there a way I can make this double authentication to become one and to use only NTLM? P.S. We have Samba domain with LDAP server and our users use Thunderbird for their mail and I want to put Lightning too. That way they will have calendar service. But I don't want they to enter username and password for the calendar every time they log in. I know they can save that password but that is not an option for my organization.

  Read the article

• In Windows 7, why won't my display stay off despite the power settings saying it should?

  - by Jer

  I'm completely stumped by this. My simple use case is that when I'm in bed, I use a cordless mouse to browse the web, watch videos, etc. - the monitor is across the room. When I'm going to sleep, I want to shut the monitor off. I also want to be able to turn it back on in the morning. I just want to turn the monitor off and on using only the mouse. I thought of creating a power setting that turned the monitor off asap (the shortest amount of time is one minute; that's fine). I have one that does this. It worked great for almost a year on my old XP machine, and for about four months on my new Windows 7 laptop (which I essentially use as a desktop). All of a sudden a couple weeks ago, it just stopped working - my monitor won't turn off on its own anymore. Here are the settings: I tried other options. Based on the advice here I tried nircmd. This seemed great. I created a shortcut with the command line: "C:\Program Files\nircmd\nircmd.exe" cmdwait 1000 monitor off I click this, and in one second the monitor goes off. However about five seconds later it turns back on, and I've been extra careful to make sure the mouse isn't moving. I have no idea what's going on. Based on both of these things, my only guess is that something could be running in the background which somehow makes the computer think it's in use. I've tried killing as many programs as possible but I still get the same behavior. Any advice? I'm mainly curious about how to debug, but am open to other suggestions about turning the monitor off and on with just the mouse as well.

  Read the article

• Removing a device in "removed" state from Linux software RAID array

  - by Sahasranaman MS

  My workstation has two disks(/dev/sd[ab]), both with similar partitioning. /dev/sdb failed, and cat /proc/mdstat stopped showing the second sdb partition. I ran mdadm --fail and mdadm --remove for all partitions from the failed disk on the arrays that use them, although all such commands failed with mdadm: set device faulty failed for /dev/sdb2: No such device mdadm: hot remove failed for /dev/sdb2: No such device or address Then I hot swapped the failed disk, partitioned the new disk and added the partitions to the respective arrays. All arrays got rebuilt properly except one, because in /dev/md2, the failed disk doesn't seem to have been removed from the array properly. Because of this, the new partition keeps getting added as a spare to the partition, and its status remains degraded. Here's what mdadm --detail /dev/md2 shows: [root@ldmohanr ~]# mdadm --detail /dev/md2 /dev/md2: Version : 1.1 Creation Time : Tue Dec 27 22:55:14 2011 Raid Level : raid1 Array Size : 52427708 (50.00 GiB 53.69 GB) Used Dev Size : 52427708 (50.00 GiB 53.69 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Intent Bitmap : Internal Update Time : Fri Nov 23 14:59:56 2012 State : active, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Name : ldmohanr.net:2 (local to host ldmohanr.net) UUID : 4483f95d:e485207a:b43c9af2:c37c6df1 Events : 5912611 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 0 0 1 removed 2 8 18 - spare /dev/sdb2 To remove a disk, mdadm needs a device filename, which was /dev/sdb2 originally, but that no longer refers to device number 1. I need help with removing device number 1 with 'removed' status and making /dev/sdb2 active.

  Read the article

• Hardware issue, bsod with windows xp irq and strange messages with ubuntu

  - by JP Hellemons

  I have an old Acer T160 and it used to run Windows XP. But I keep getting random BSOD's. I keep seeing IRQ conflicts. I tried to run ubuntu, which runs and keeps running. But sometimes is not responding. Also there are these popups at ubuntu 12.04 that my network cable (which is onboard) is unplugged. But I have no cable in it! and have an usb dongle for wifi. which also seems unstable. have to (auto)reconnect sometimes. So my question is: is it my mobo, power supply or something else? FYI: I had an dvd-rw station which did not open properly, so unplugged the ata and power, als removed the second harddrive. now only have sata harddrive. also removed the extra video card (ati sapphire x1600 pro) so use only onboard video now and still have these issues. EDIT Update: will try with a new PSU (power supply unit of 400watt) the old (factory) one was 300watt. and will use a usb drive which has 12.04 ubuntu on it (made with unetbootin) to format everything and re-install ubuntu. (so also delete mbr partition) will update the day after tomorrow.

  Read the article

• New SBS 2011 installation (not migration) in an existing 2008 R2 domain

  - by Tong Wang

  My current network setup has two servers: a Windows 2008 R2 with TMG 2010 as edge firewall (TMG server), a second 2008 R2 with DC, DNS and Hyper-V roles (DCDNS server). I was trying to install SBS 2011 as a child partition on DCDNS, first I installed SBS 2011 in English and did the migration successfully. However, later on, I found that I can't change the display language in SBS 2011 once it's installed (but the clients require a different language), so I had to re-install the SBS in a different language. It is during the re-installation that the problem came up: the migration can't be completed with some error message stating "can't access the source server". I re-ran the migration preparation tool, but it didn't make any difference. I wonder if it's because the source server can only be "migrated" once. Since I only need to setup a handful of users and computers, so I decided to do a new install of SBS and picked a different domain name. But I can't get the SBS to connect to LAN: it can't ping other servers, neither can other servers ping the SBS server. I've tried to stop the DC/DNS services on DCDNS and restart SBS, but with no difference. Anyone has idea how to fix this problem?

  Read the article

< Previous Page | 463 464 465 466 467 468 469 470 471 472 473 474  | Next Page >