cached mode - Page 472 - Developer IT

Overwrite values when using gridview Edit?

- by sah302

I am using a GridView which is bound to a LinqDataSource and using the automatic edit and delete buttons. However, I don't want the user to edit two of the columns manually, but done automatically. Specifically username who last updated the entry, and the date it was updated. The gridview only contains 3 columns: Name, Date modified, last updated by. Right now when the user clicks the edit button they can only edit the name column (other two set to read-only). Upon clicking the update button, I want the other 2 fields to update as well based on some extra code. I thought this was done in the code behind within the event rowUpdating, but it doesn't seem to work. My gridview: <asp:GridView ID="gvNewsSources" runat="server" AutoGenerateColumns="False" DataSourceID="ldsNewsSource" AutoGenerateDeleteButton="True" AutoGenerateEditButton="True" CellPadding="4" ForeColor="#333333" GridLines="None" DataKeyNames="Id"> <RowStyle BackColor="#F7F6F3" ForeColor="#333333" /> <Columns> <asp:BoundField DataField="Name" HeaderText="Name" SortExpression="Name" /> <asp:BoundField DataField="LastUpdatedBy" HeaderText="Last Updated By" SortExpression="LastUpdatedBy" ReadOnly="True" /> <asp:BoundField DataField="DatedModified" HeaderText="Dated Modified" SortExpression="DatedModified" ReadOnly="True" /> </Columns> <FooterStyle BackColor="#5D7B9D" Font-Bold="True" ForeColor="White" /> <PagerStyle BackColor="#284775" ForeColor="White" HorizontalAlign="Center" /> <SelectedRowStyle BackColor="#E2DED6" Font-Bold="True" ForeColor="#333333" /> <HeaderStyle BackColor="#5D7B9D" Font-Bold="True" ForeColor="White" /> <EditRowStyle BackColor="#999999" /> <AlternatingRowStyle BackColor="White" ForeColor="#284775" /> </asp:GridView> My code behind: Partial Class _Default Inherits System.Web.UI.Page Protected Sub gvNewsSources_RowUpdating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewUpdateEventArgs) Handles gvNewsSources.RowUpdating e.NewValues("LastUpdatedBy") = GetUser.GetUserName e.NewValues("DateModified") = Date.Now() lblOutput.Text = e.NewValues("DateModified").ToString() End Sub End Class Yet when I run through this, I get no errors, but the values aren't being updated in the database or in the gridview. I ran through debug mode and the new values dictionary starts at 1 and ends up being 3 by the end of the rowUpdating event and the value is being set (tested by output the newValue of Datemodified), but it isn't saving. What am I doing wrong?

Read the article

problem while displayin the texture image on view that works fine on iphone simulator but not on dev

- by yunas

hello i am trying to display an image on iphone by converting it into texture and then displaying it on the UIView. here is the code to load an image from an UIImage object - (void)loadImage:(UIImage *)image mipmap:(BOOL)mipmap texture:(uint32_t)texture { int width, height; CGImageRef cgImage; GLubyte *data; CGContextRef cgContext; CGColorSpaceRef colorSpace; GLenum err; if (image == nil) { NSLog(@"Failed to load"); return; } cgImage = [image CGImage]; width = CGImageGetWidth(cgImage); height = CGImageGetHeight(cgImage); colorSpace = CGColorSpaceCreateDeviceRGB(); // Malloc may be used instead of calloc if your cg image has dimensions equal to the dimensions of the cg bitmap context data = (GLubyte *)calloc(width * height * 4, sizeof(GLubyte)); cgContext = CGBitmapContextCreate(data, width, height, 8, width * 4, colorSpace, kCGImageAlphaPremultipliedLast); if (cgContext != NULL) { // Set the blend mode to copy. We don't care about the previous contents. CGContextSetBlendMode(cgContext, kCGBlendModeCopy); CGContextDrawImage(cgContext, CGRectMake(0.0f, 0.0f, width, height), cgImage); glGenTextures(1, &(_textures[texture])); glBindTexture(GL_TEXTURE_2D, _textures[texture]); if (mipmap) glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR_MIPMAP_LINEAR); else glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, width, height, 0, GL_RGBA, GL_UNSIGNED_BYTE, data); if (mipmap) glGenerateMipmapOES(GL_TEXTURE_2D); err = glGetError(); if (err != GL_NO_ERROR) NSLog(@"Error uploading texture. glError: 0x%04X", err); CGContextRelease(cgContext); } free(data); CGColorSpaceRelease(colorSpace); } The problem that i currently am facing is this code workd perfectly fine and displays the image on simulator where as on the device as seen on debugger an error is displayed i.e. Error uploading texture. glError: 0x0501 any idea how to tackle this bug.... thnx in advance 4 ur soluitons

Read the article

How to retain canvas state and use it in onDraw() method

- by marqss

I want to make a measure tape component for my app. It should look something like this with values from 0cm to 1000cm: Initially I created long bitmap image with repeated tape background. I drew that image to canvas in onDraw() method of my TapeView (extended ImageView). Then I drew a set of numbers with drawText() on top of the canvas. public TapeView(Context context, AttributeSet attrs){ ImageView imageView = new ImageView(mContext); LayoutParams params = new LayoutParams(LayoutParams.WRAP_CONTENT, LayoutParams.FILL_PARENT); imageView.setLayoutParams(params); mBitmap = createTapeBitmap(); imageView.setImageBitmap(mBitmap); this.addView(imageView); } private Bitmap createTapeBitmap(){ Bitmap mBitmap = Bitmap.createBitmap(5000, 100, Config.ARGB_8888); //size of the tape Bitmap tape = BitmapFactory.decodeResource(getResources(),R.drawable.tape);//the image size is 100x100px Bitmap scaledTape = Bitmap.createScaledBitmap(tape, 100, 100, false); Canvas c = new Canvas(mBitmap); Paint paint = new Paint(); paint.setColor(Color.WHITE); paint.setFakeBoldText(true); paint.setAntiAlias(true); paint.setTextSize(30); for(int i=0; i<=500; i++){ //draw background image c.drawBitmap(scaledTape,(i * 200), 0, null); //draw number in the middle of that background String text = String.valueOf(i); int textWidth = (int) paint.measureText(text); int position = (i * 100) + 100 - (textWidth / 2); c.drawText(text, position, 20, paint); } return mBitmap; } Finally I added this view to HorizontalScrollView. At the beginning everything worked beautifully but I realised that the app uses a Lot of memory and sometimes crashed with OutOfMemory exception. It was obvious because a size of the bitmap image was ~4mb! In order to increase the performance, instead of creating the bitmap I use Drawable (with the yellow tape strip) and set the tile mode to REPEAT: setTileModeX(TileMode.REPEAT); The view now is very light but I cannot figure out how to add numbers. There are too many of them to redraw them each time the onDraw method is called. Is there any way that I can draw these numbers on canvas and then save that canvas so it can be reused in onDraw() method?

Read the article

Merge Mutliple Excel Workbooks

- by IRHM

I wonder whether someone may be able to help me please. I'm trying to use the code below to allow the user to select multiple Excel Workbooks, amalgamating the data into one 'Summary' sheet. Sub Merge() Dim DestWB As Workbook, WB As Workbook, WS As Worksheet, SourceSheet As String Set DestWB = ActiveWorkbook SourceSheet = "Input" startrow = 7 FileNames = Application.GetOpenFilename( _ filefilter:="Excel Files (*.xls*),*.xls*", _ Title:="Select the workbooks to merge.", MultiSelect:=True) If IsArray(FileNames) = False Then If FileNames = False Then Exit Sub End If End If For n = LBound(FileNames) To UBound(FileNames) Set WB = Workbooks.Open(Filename:=FileNames(n), ReadOnly:=True) For Each WS In WB.Worksheets If WS.Name = SourceSheet Then With WS If .UsedRange.Cells.Count > 1 Then dr = DestWB.Worksheets("Input").Range("C" & Rows.Count).End(xlUp).Row + 1 lastrow = .Range("C" & Rows.Count).End(xlUp).Row For j = lastrow To startrow Step -1 Select Case .Range("E" & j).Value Case "Manager", "Lead", "Technical", "Analyst" 'do nothing Case Else .Rows(j).EntireRow.Delete End Select Next lastrow = .Range("C" & Rows.Count).End(xlUp).Row If lastrow >= startrow Then .Range("B" & startrow & ":AD" & lastrow).Copy DestWB.Worksheets("Input").Cells(dr, "B").PasteSpecial xlValues .Range("AF" & startrow & ":AQ" & lastrow).Copy DestWB.Worksheets("Input").Cells(dr, "AF").PasteSpecial xlValues .Range("AS" & startrow & ":AS" & lastrow).Copy DestWB.Worksheets("Input").Cells(dr, "AS").PasteSpecial xlValues End If End If End With Exit For End If Next WS WB.Close savechanges:=False Next n End Sub The code works fine except for one issue which I've been trying to solve for the last few weeks. The following line of code looks in column E of the Source file, and if any of the entries match the values shown in the code it copies that row of data to paste into the Destination file. If Range("E" & j) <> "Manager" And Range("E" & j) <> "Lead" And Range("E" & j) <> "Technical" And Range("E" & j) <> "Analyst" Then Rows(j).Delete The problem I have is that if none of these values are found in the Source file, I receive the following error: Run time error '1004': Delete method of range class failed and in Debug mode it highlights this part of the line as the source of the error, but I've no idea why. Rows(j).Delete I just wondered whether someone may be able to look at this please and let me know where I'm going wrong, or perhaps even suggest a more efficient process of allowing the user to merge the workbooks. Many thanks and kind regards

Read the article

Embedded QGraphicsView do not hide after Dialog closes

- by torsten

I call a QDialog in to modes, showNormal and showFullscreen. In normal mode all works fine. With a Keyevent the Dialog closes as expected. In Fullscreen, after a keyevent the Dialog closes, but the QGraphicsView will stay on top. All things i've tried (like closing/updating the view) failed. the View sta on top. view = new QGraphicsView(scene); view->setViewport(new QGLWidget(QGLFormat(QGL::SampleBuffers))); view->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff); view->setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOff); view->setViewportUpdateMode(QGraphicsView::FullViewportUpdate); view->setFrameStyle(QFrame::NoFrame); view->setBackgroundBrush(Qt::white); view->setRenderHints(QPainter::Antialiasing); view->setSceneRect(0,0,resolution.x(),resolution.y()); Maybe my structure will help to solve the Problem: This call the QDialog named GraphicsWidgetDialog. void DemoArrowDialog::setDemo() { gwd->graphicsWidget->setListenKeyEvents(true); gwd->setWindowTitle("Demo"); gwd->setFixedSize(500,500); gwd->restoreGeometry(settings); gwd->setContentsMargins(0,0,0,0); gwd->setModal(false); gwd->showNormal(); gwd->graphicsWidget->show(); gwd->setFocus(); } void DemoArrowDialog::setFullScreenDemo() { settings = gwd->saveGeometry(); gwd->graphicsWidget->setListenKeyEvents(true); gwd->setContentsMargins(0,0,0,0); gwd->setModal(true); gwd->graphicsWidget->showFullScreen(); gwd->showFullScreen(); gwd->setFocus(); } This is the Definition of the GraphicsWidgetDialog GraphicsWidgetDialog::GraphicsWidgetDialog(QWidget *parent) : QDialog(parent) { graphicsWidget = new GraphicsWidget; QGridLayout *layout = new QGridLayout; layout->addWidget(graphicsWidget); layout->setContentsMargins(0,0,0,0); graphicsWidget->loadConfig(); graphicsWidget->loadArrowConfig("Arrow"); graphicsWidget->setArrowPosition(arrowPosition(arrowCenter)); graphicsWidget->update(); setLayout(layout); connect(graphicsWidget,SIGNAL(closeEvent()),this,SLOT(reject())); } The GraphicsWidget is the Widget that contains the QGraphcisView and Scene On keyPessEvent it will emit the closeEvent(). Any Idea?

Read the article

Interoperability between two AES algorithms

- by lpfavreau

Hello, I'm new to cryptography and I'm building some test applications to try and understand the basics of it. I'm not trying to build the algorithms from scratch but I'm trying to make two different AES-256 implementation talk to each other. I've got a database that was populated with this Javascript implementation stored in Base64. Now, I'm trying to get an Objective-C method to decrypt its content but I'm a little lost as to where the differences in the implementations are. I'm able to encrypt/decrypt in Javascript and I'm able to encrypt/decrypt in Cocoa but cannot make a string encrypted in Javascript decrypted in Cocoa or vice-versa. I'm guessing it's related to the initialization vector, nonce, counter mode of operation or all of these, which quite frankly, doesn't speak to me at the moment. Here's what I'm using in Objective-C, adapted mainly from this and this: @implementation NSString (Crypto) - (NSString *)encryptAES256:(NSString *)key { NSData *input = [self dataUsingEncoding: NSUTF8StringEncoding]; NSData *output = [NSString cryptoAES256:input key:key doEncrypt:TRUE]; return [Base64 encode:output]; } - (NSString *)decryptAES256:(NSString *)key { NSData *input = [Base64 decode:self]; NSData *output = [NSString cryptoAES256:input key:key doEncrypt:FALSE]; return [[[NSString alloc] initWithData:output encoding:NSUTF8StringEncoding] autorelease]; } + (NSData *)cryptoAES256:(NSData *)input key:(NSString *)key doEncrypt:(BOOL)doEncrypt { // 'key' should be 32 bytes for AES256, will be null-padded otherwise char keyPtr[kCCKeySizeAES256 + 1]; // room for terminator (unused) bzero(keyPtr, sizeof(keyPtr)); // fill with zeroes (for padding) // fetch key data [key getCString:keyPtr maxLength:sizeof(keyPtr) encoding:NSUTF8StringEncoding]; NSUInteger dataLength = [input length]; // See the doc: For block ciphers, the output size will always be less than or // equal to the input size plus the size of one block. // That's why we need to add the size of one block here size_t bufferSize = dataLength + kCCBlockSizeAES128; void* buffer = malloc(bufferSize); size_t numBytesCrypted = 0; CCCryptorStatus cryptStatus = CCCrypt(doEncrypt ? kCCEncrypt : kCCDecrypt, kCCAlgorithmAES128, kCCOptionECBMode | kCCOptionPKCS7Padding, keyPtr, kCCKeySizeAES256, nil, // initialization vector (optional) [input bytes], dataLength, // input buffer, bufferSize, // output &numBytesCrypted ); if (cryptStatus == kCCSuccess) { // the returned NSData takes ownership of the buffer and will free it on deallocation return [NSData dataWithBytesNoCopy:buffer length:numBytesCrypted]; } free(buffer); // free the buffer; return nil; } @end Of course, the input is Base64 decoded beforehand. I see that each encryption with the same key and same content in Javascript gives a different encrypted string, which is not the case with the Objective-C implementation that always give the same encrypted string. I've read the answers of this post and it makes me believe I'm right about something along the lines of vector initialization but I'd need your help to pinpoint what's going on exactly. Thank you!

Read the article

XmlHttpRequest bug?

- by valdo

Hello all. I'm writing a program that among other things needs to download a file given its URL. I'm too lazy to implement the Http/Https protocols manually, so that I needed some library/object/function that'll do the job. Critical requirement: The download must be asynchronous. That is, the thread that issued the download must be able to do something else "while" downloading the file, plus the download must be able to be aborted anytime without any barbaric side effects (such as internal call to TerminateThread). Nice-to-have requirements: Should be able to download the file "into memory". Means - read the contents of the file as they arrive, not necessarily save it into some "file system" file. It'd be nice to have some convenient Win32 progress notification mechanism (waitable event, semahpore, completion port, etc.), rather than just periodically polling the download status. I've chosen the XmlHttpRequest COM object to do the work. It seemed to work fine enough, plus it supported asynchronous mode. However I noticed that after some period it just stops working. That is, after several successful file downloads it stops downloading anything. I periodically poll it to get its status, it reports "in-progress", but nothing actually happens, and there's no network activity. Moreover, when the same process creates another instance of XmlHttpRequest object to perform new downloads - the effect is the same. The object reports "in progress", whereas it doesn't even try to connect to the server (according to network sniffers and system TCP state). The only way to make this object work back is to restart the process. This makes me suspect that there's a sort of a bug (sorry, I meant undocumented feature) in the object. Also it's not a bug at the level of an individual object, since the problem persists when the object is destroyed and another one is created. It's probably some global state of the DLL that implements this object. Does anyone know something about this? Is this a known bug? I'm pretty sure there's no chance that I have another bug in my code, because of which it seems to me to be the bug is in the XmlHttpRequest. I've done enoughtests and spent time with the debugger to conclude without reasonable doubt that it's just the object stops working. BTW, while the object should work, I do all the waiting via MsgWaitXXXX API calls. So that if this object needs the message loop to work properly (for instance, it may create a hidden notification window and bind it to a socket via WSAAsyncSelect) - I give it the opportunity.

Read the article

e2fsck extremely slow, although enough memory exists

- by kaefert

I've got this external USB-Disk: kaefert@blechmobil:~$ lsusb -s 2:3 Bus 002 Device 003: ID 0bc2:3320 Seagate RSS LLC As can be seen in this dmesg output, there is some problem that prevents that disk from beeing mounted: kaefert@blechmobil:~$ dmesg ... [ 113.084079] usb 2-1: new high-speed USB device number 3 using ehci_hcd [ 113.217783] usb 2-1: New USB device found, idVendor=0bc2, idProduct=3320 [ 113.217787] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 113.217790] usb 2-1: Product: Expansion Desk [ 113.217792] usb 2-1: Manufacturer: Seagate [ 113.217794] usb 2-1: SerialNumber: NA4J4N6K [ 113.435404] usbcore: registered new interface driver uas [ 113.455315] Initializing USB Mass Storage driver... [ 113.468051] scsi5 : usb-storage 2-1:1.0 [ 113.468180] usbcore: registered new interface driver usb-storage [ 113.468182] USB Mass Storage support registered. [ 114.473105] scsi 5:0:0:0: Direct-Access Seagate Expansion Desk 070B PQ: 0 ANSI: 6 [ 114.474342] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.475089] sd 5:0:0:0: [sdb] Write Protect is off [ 114.475092] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 114.475959] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 114.477093] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.501649] sdb: sdb1 [ 114.502717] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.504354] sd 5:0:0:0: [sdb] Attached SCSI disk [ 116.804408] EXT4-fs (sdb1): ext4_check_descriptors: Checksum for group 3976 failed (47397!=61519) [ 116.804413] EXT4-fs (sdb1): group descriptors corrupted! ... So I went and fired up my favorite partition manager - gparted, and told it to verify and repair the partition sdb1. This made gparted call e2fsck (version 1.42.4 (12-Jun-2012)) e2fsck -f -y -v /dev/sdb1 Although gparted called e2fsck with the "-v" option, sadly it doesn't show me the output of my e2fsck process (bugreport https://bugzilla.gnome.org/show_bug.cgi?id=467925 ) I started this whole thing on Sunday (2012-11-04_2200) evening, so about 48 hours ago, this is what htop says about it now (2012-11-06-1900): PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command 3704 root 39 19 1560M 1166M 768 R 98.0 19.5 42h56:43 e2fsck -f -y -v /dev/sdb1 Now I found a few posts on the internet that discuss e2fsck running slow, for example: http://gparted-forum.surf4.info/viewtopic.php?id=13613 where they write that its a good idea to see if the disk is just that slow because maybe its damaged, and I think these outputs tell me that this is not the case in my case: kaefert@blechmobil:~$ sudo hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 3562 MB in 2.00 seconds = 1783.29 MB/sec Timing buffered disk reads: 82 MB in 3.01 seconds = 27.26 MB/sec kaefert@blechmobil:~$ sudo hdparm /dev/sdb /dev/sdb: multcount = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 364801/255/63, sectors = 5860533160, start = 0 However, although I can read quickly from that disk, this disk speed doesn't seem to be used by e2fsck, considering tools like gkrellm or iotop or this: kaefert@blechmobil:~$ iostat -x Linux 3.2.0-2-amd64 (blechmobil) 2012-11-06 _x86_64_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 14,24 47,81 14,63 0,95 0,00 22,37 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sda 0,59 8,29 2,42 5,14 43,17 160,17 53,75 0,30 39,80 8,72 54,42 3,95 2,99 sdb 137,54 5,48 9,23 0,20 587,07 22,73 129,35 0,07 7,70 7,51 16,18 2,17 2,04 Now I researched a little bit on how to find out what e2fsck is doing with all that processor time, and I found the tool strace, which gives me this: kaefert@blechmobil:~$ sudo strace -p3704 lseek(4, 41026998272, SEEK_SET) = 41026998272 write(4, "\212\354K[_\361\3nl\212\245\352\255jR\303\354\312Yv\334p\253r\217\265\3567\325\257\3766"..., 4096) = 4096 lseek(4, 48404766720, SEEK_SET) = 48404766720 read(4, "\7t\260\366\346\337\304\210\33\267j\35\377'\31f\372\252\ffU\317.y\211\360\36\240c\30`\34"..., 4096) = 4096 lseek(4, 41027002368, SEEK_SET) = 41027002368 write(4, "\232]7Ws\321\352\t\1@[+5\263\334\276{\343zZx\352\21\316`1\271[\202\350R`"..., 4096) = 4096 lseek(4, 48404770816, SEEK_SET) = 48404770816 read(4, "\17\362r\230\327\25\346//\210H\v\311\3237\323K\304\306\361a\223\311\324\272?\213\tq \370\24"..., 4096) = 4096 lseek(4, 41027006464, SEEK_SET) = 41027006464 write(4, "\367yy>x\216?=\324Z\305\351\376&\25\244\210\271\22\306}\276\237\370(\214\205G\262\360\257#"..., 4096) = 4096 lseek(4, 48404774912, SEEK_SET) = 48404774912 read(4, "\365\25\0\21|T\0\21}3t_\272\373\222k\r\177\303\1\201\261\221$\261B\232\3142\21U\316"..., 4096) = 4096 ^CProcess 3704 detached around 16 of these lines every second, so 4 read and 4 write operations every second, which I don't consider to be a lot.. And finally, my question: Will this process ever finish? If those numbers from fseek (48404774912) represent bytes, that would be something like 45 gigabytes, with this beeing a 3 terrabyte disk, which would give me 134 days to go, if the speed stays constant, and e2fsck scans the disk like this completly and only once. Do you have some advice for me? I have most of the data on that disk elsewhere, but I've put a lot of hours into sorting and merging it to this disk, so I would prefer to getting this disk up and running again, without formatting it anew. I don't think that the hardware is damaged since the disk is only a few months and since I can't see any I/O errors in the dmesg output. UPDATE: I just looked at the strace output again (2012-11-06_2300), now it looks like this: lseek(4, 1419860611072, SEEK_SET) = 1419860611072 read(4, "3#\f\2447\335\0\22A\355\374\276j\204'\207|\217V|\23\245[\7VP\251\242\276\207\317:"..., 4096) = 4096 lseek(4, 43018145792, SEEK_SET) = 43018145792 write(4, "]\206\231\342Y\204-2I\362\242\344\6R\205\361\324\177\265\317C\334V\324\260\334\275t=\10F."..., 4096) = 4096 lseek(4, 1419860615168, SEEK_SET) = 1419860615168 read(4, "\262\305\314Y\367\37x\326\245\226\226\320N\333$s\34\204\311\222\7\315\236\336\300TK\337\264\236\211n"..., 4096) = 4096 lseek(4, 43018149888, SEEK_SET) = 43018149888 write(4, "\271\224m\311\224\25!I\376\16;\377\0\223H\25Yd\201Y\342\r\203\271\24eG<\202{\373V"..., 4096) = 4096 lseek(4, 1419860619264, SEEK_SET) = 1419860619264 read(4, ";d\360\177\n\346\253\210\222|\250\352T\335M\33\260\320\261\7g\222P\344H?t\240\20\2548\310"..., 4096) = 4096 lseek(4, 43018153984, SEEK_SET) = 43018153984 write(4, "\360\252j\317\310\251G\227\335{\214`\341\267\31Y\202\360\v\374\307oq\3063\217Z\223\313\36D\211"..., 4096) = 4096 So the numbers in the lseek lines before the reads, like 1419860619264 are already a lot bigger, standing for 1.29 terabytes if those numbers are bytes, so it doesn't seem to be a linear progress on a big scale, maybe there are only some areas that need work, that have big gaps in between them. UPDATE2: Okey, big disappointment, the numbers are back to very small again (2012-11-07_0720) lseek(4, 52174548992, SEEK_SET) = 52174548992 read(4, "\374\312\22\\\325\215\213\23\0357U\222\246\370v^f(\312|f\212\362\343\375\373\342\4\204mU6"..., 4096) = 4096 lseek(4, 46603526144, SEEK_SET) = 46603526144 write(4, "\370\261\223\227\23?\4\4\217\264\320_Am\246CQ\313^\203U\253\274\204\277\2564n\227\177\267\343"..., 4096) = 4096 so either e2fsck goes over the data multiple times, or it just hops back and forth multiple times. Or my assumption that those numbers are bytes is wrong. UPDATE3: Since it's mentioned here http://forums.fedoraforum.org/showthread.php?t=282125&page=2 that you can testisk while e2fsck is running, i tried that, though not with a lot of success. When asking testdisk to display the data of my partition, this is what I get: TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org 1 P Linux 0 4 5 45600 40 8 732566272 Can't open filesystem. Filesystem seems damaged. And this is what strace currently gives me (2012-11-07_1030) lseek(4, 212460343296, SEEK_SET) = 212460343296 read(4, "\315Mb\265v\377Gn \24\f\205EHh\2349~\330\273\203\3375\206\10\r3=W\210\372\352"..., 4096) = 4096 lseek(4, 47347830784, SEEK_SET) = 47347830784 write(4, "]\204\223\300I\357\4\26\33+\243\312G\230\250\371*m2U\t_\215\265J \252\342Pm\360D"..., 4096) = 4096 (times are in CET)

Read the article

properies profile when writing word file

- by avani-nature

Hai frnds i am new to php i am having following problems in my coding... 1.Actually i am opening word document with com object and storing it in textarea. 2.when content gets opened in textarea i am editing that content and saving the document 3.actually when i edited that file and done save after that if i open word document then file properties-custom the old content getting removed i wannt to retain that even if i edited the word document..please do the needful i am using below code <?php $filename = 'C:/xampp/htdocs/mts/sites/default/files/a.doc'; //echo $filename; if(isset($_REQUEST['Save'])){ $somecontent = stripslashes($_POST['somecontent']); // Let's make sure the file exists and is writable first. if (is_writable($filename)) { // In our example we're opening $filename in append mode. // The file pointer is at the bottom of the file hence // that's where $somecontent will go when we fwrite() it. if (!$handle = fopen($filename, 'w')) { echo "Cannot open file ($filename)"; exit; } // Write $somecontent to our opened fi<form action="" method="get"></form>le. if (fwrite($handle, $somecontent) === FALSE) { echo "Cannot write to file ($filename)"; exit; } echo "Success, wrote ($somecontent) to file ($filename) <a href=".$_SERVER['PHP_SELF']."> - Continue - "; fclose($handle); } else { echo "The file $filename is not writable"; } } else{ // get contents of a file into a string $handle = fopen($filename, "r"); $somecontent = fread($handle, filesize($filename)); $word = new COM("word.application") or die ("Could not initialise MS Word object."); $word->Documents->Open(realpath("$filename")); // Extract content. $somecontent = (string) $word->ActiveDocument->Content; //echo $somecontent; $word->ActiveDocument->Close(false); $word->Quit(); $word = null; unset($word); fclose($handle); } ?> <h6>Edit file --------><? $filenam=explode("/",$filename);$filename=$filename[7]; echo $filename ;?></h6> <form name="form1" method="post" action=""> <p> <textarea name="somecontent" cols="100" rows="20"><? echo $somecontent ;?></textarea> </p> <div style='padding-left:250px;'><input type="submit" name="Save" value="Save"></div> </p> </form> <? } ?>

Read the article

Using one data source across multiple views in Kendo UI SPA

- by user3731783

I am trying to build a Kendo UI SPA. I have two views. View 1 (appListView) shows Application Details in a grid and view 2 (activityView) will have a dropdown for application names and a grid that shows the activity for selected application As I am loading all the application details on the loading of view 1, I would like to re-use those details to populate the dropdown on view 2. Please see my code below. Everything works fine but when I go to View 2 it makes a call to the service again to get application details. I would like to use the existing data if it is already loaded and if the uses comes to view 2 directly then it should get application data also. I am not sure what I am missing in the code. View Markup: <script id="appListView" type="text/x-kendo-template"> <h3 data-bind="html: displayName"></h3> <div data-role="grid" data-editable="{'mode':'popup'}" data-bind="source: items" data-columns="[ {'field': 'Name'}, {'field': 'ContactEmail','title':'Contact Email'} ]"> </div> </script> <script id="" type="text\x-kendo-template"> <div> Activity for Application   <input name="AppName" data-role="dropdownlist" data-source="appsModel.items" data-text-field="Name" data-value-field="Id" data-option-label="Choose an application name" style="width:250px;" /> </div> <div id="Activities" data-role="grid" data-bind="source: items" data-auto-bind="false" data-columns="[ {'field': 'Domain','title':'Domain'}, {'field': 'ActivityType','title':'Activity Type'} ]"> </div> </script> js with DataSource and View Model: //data sources var applications = new kendo.data.DataSource({ schema: { model: { id: "Id" } }, serverFiltering : true, transport: { read: { url: '/api/App', dataType: 'json', type:'GET' } } }); var activities = new kendo.data.DataSource({ schema: { model: { id: "Id" } }, transport: { read: { url: '/api/Activity', dataType: 'json', type: 'GET' }, parameterMap: function (data, type) { if (type == "read") { return 'appId=' + $("#AppName").val() ; } } } }); //Models var appsModel = kendo.observable({ items: applications, displayName: 'My Applications' }); var activityModel = kendo.observable({ items: activities, onAppChange: function(t){ $("#Activities").data("kendoGrid").dataSource.read(); }, dispayName: 'Application Activities' }); //views var layout = new kendo.Layout("layout-template"); var appListView = new kendo.View("appListView", { model: appsModel }); var activityView = new kendo.View("activityView", { model: activityModel }); Thank you for taking time to read this long question.

Read the article

JAVA - Strange problem (probably thread problem) with JTable & Model

- by Stefanos Kargas

I am using 2 Tables (JTable) with their DefaultTableModels. The first table is already populated. The second table is populated for each row of the first table (using an SQL Query). My purpose is to export every line of the first table with it's respective lines of the second in an Excel File. I am doing it with a for (for each line of 1st table), in which I write a line of the 1st table in the Excel File, then I populate the 2nd table (for this line of 1st Table), I get every line from the Table (from it's Model actually) and put it in the Excel File under the current line of 1st table. This means that if I have n lines in first table I will clear and populate again the second table n times. All this code is called in a seperate thread. THE PROBLEM IS: Everything works perfectly fine ecxept that I am getting some exceptions. The strange thing is that I'm not getting anything false in my result. The Excel file is perfect. Some of the lines of the exceptions are: Exception in thread "AWT-EventQueue-0" java.lang.ArrayIndexOutOfBoundsException: 0 = 0 at java.util.Vector.elementAt(Vector.java:427) at javax.swing.table.DefaultTableModel.getValueAt(DefaultTableModel.java:632) at javax.swing.JComponent.paint(JComponent.java:1017) at javax.swing.RepaintManager.paint(RepaintManager.java:1220) at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:803) I am assuming that the problem lies in the fact that the second table needs some more time to be populated before I try to get any data from it. That's why I see RepaintManager and paintDirtyRegions in my exceptions. Another thing I did is that I ran my program in debug mode and I put a breakpoint after each population of the 2nd table. Then I pressed F5 to continue for each population of 2nd table and no exception appeared. The program came to it's end without any exceptions. This is another important fact that tells me that maybe in this case I gave the table enough time to be populated. Of course you will ask me: If your program works fine, why do you care about the exceptions? I care for avoiding any future problems and I care to have a better understanding of Java and Java GUI and threads. Why do you depend on a GUI component (and it's model) to get your information and why don't you recreate the resultset that populates your tables using an SQL Query and get your info from the resultset? That would be the best and the right way. The fact is that I have the tables code ready and it was easier for me to just get the info from them. But the right way would be to get everything direct from database. Anyway what I did brought out my question, and answering it would help me understand more things about java. So I posted it.

Read the article

WCF Service with callbacks coming from background thread?

- by Mark Struzinski

Here is my situation. I have written a WCF service which calls into one of our vendor's code bases to perform operations, such as Login, Logout, etc. A requirement of this operation is that we have a background thread to receive events as a result of that action. For example, the Login action is sent on the main thread. Then, several events are received back from the vendor service as a result of the login. There can be 1, 2, or several events received. The background thread, which runs on a timer, receives these events and fires an event in the wcf service to notify that a new event has arrived. I have implemented the WCF service in Duplex mode, and planned to use callbacks to notify the UI that events have arrived. Here is my question: How do I send new events from the background thread to the thread which is executing the service? Right now, when I call OperationContext.Current.GetCallbackChannel<IMyCallback>(), the OperationContext is null. Is there a standard pattern to get around this? I am using PerSession as my SessionMode on the ServiceContract. UPDATE: I thought I'd make my exact scenario clearer by demonstrating how I'm receiving events from the vendor code. My library receives each event, determines what the event is, and fires off an event for that particular occurrence. I have another project which is a class library specifically for connecting to the vendor service. I'll post the entire implementation of the service to give a clearer picture: [ServiceBehavior( InstanceContextMode = InstanceContextMode.PerSession )] public class VendorServer:IVendorServer { private IVendorService _vendorService; // This is the reference to my class library public VendorServer() { _vendorServer = new VendorServer(); _vendorServer.AgentManager.AgentLoggedIn += AgentManager_AgentLoggedIn; // This is the eventhandler for the event which arrives from a background thread } public void Login(string userName, string password, string stationId) { _vendorService.Login(userName, password, stationId); // This is a direct call from the main thread to the vendor service to log in } private void AgentManager_AgentLoggedIn(object sender, EventArgs e) { var agentEvent = new AgentEvent { AgentEventType = AgentEventType.Login, EventArgs = e }; } } The AgentEvent object contains the callback as one of its properties, and I was thinking I'd perform the callback like this: agentEvent.Callback = OperationContext.Current.GetCallbackChannel<ICallback>(); How would I pass the OperationContext.Current instance from the main thread into the background thread?

Read the article

Alternative to Page_Load in ASP.NET (and a good WTF story)

- by Jason

Woo, I have a doozy of a problem (might even be one for the Daily WTF) and I'm hoping there's a solution. (My apologies for the long post...) I have been working on a website that I inherited about a month ago. One of the parts I have been working on is fixing one of the controls (essentially a dynamic header bar) so that it displays additional information as requested by my users. As part of doing this project, I created a Site.master file so that I wouldn't have to recode the header bar into every single page. When I first started doing this, it seemingly worked very well. All the pages I had developed looked great and the bar updated as it should displaying the information as it should. Well, when I dropped the Site.master (and this control) into older site pages (ones I did not specifically develop) I noticed that it looked bad on some of them, but not all of them. When I say it looked bad, basically, the control would left-align itself to the page rather than center as it should. I spent a couple hours debugging to no avail - CSS looked correct, the HTML appeared to be okay, I didn't see anything in the Javascript (although, I did miss something as I'll point out in a second), and even the old code looked correct (to the best that it could - it's not very well written). Another coworker took a look at the site and couldn't find anything at first, either. It wasn't until I just thought to look at the rendered source code of the page (I had been working in the developer view up to this point in IE8) that it became clear what was wrong. The original developer performs searches on many of the pages. To accomplish this, he queries the database for ALL the data and then loads them into Javascript arrays within the page so he can get access to them. This in itself is a huge problem because we're talking about thousands of items, and it obviously isn't scalable (and, yes, the site is slow). However, it finally clicked what was screwing up the Site.master - when he loads the data into the Javascript arrays, he writes out the data to the HTML upon Page_Load using numerous Response.Write(string) calls. The WTF (and what was messing me up) is that he inserts the Javascript before the DOCTYPE causing IE to go into quirks mode! So, because I need to at least get this release out (I'll fix the real problem later), I was wondering: is there a way I can force this Javascript to be inserted elsewhere into the HTML—after the DOCTYPE at the very least? Right now, all the Response.Write() calls are being done in the Page_Load method. I just need them to be inserted later.

Read the article

Rails 3 NameError (cannot remove Object::Version) error

- by Jeff D

Can anyone point me at what might be causing this error? There is no ApplicationTrace, and it locks the server hard on my development machine. I think it has something to do with the way rails reloads your classes in development mode, and it appears to have something to do with a Version constant. I can't find a reference to this though. Can anyone point me in the direction of what would cause this? activesupport (3.0.3) lib/active_support/dependencies.rb:645:in `remove_const' activesupport (3.0.3) lib/active_support/dependencies.rb:645:in `remove_constant' activesupport (3.0.3) lib/active_support/dependencies.rb:645:in `instance_eval' activesupport (3.0.3) lib/active_support/dependencies.rb:645:in `remove_constant' activesupport (3.0.3) lib/active_support/dependencies.rb:521:in `remove_unloadable_constants!' activesupport (3.0.3) lib/active_support/dependencies.rb:521:in `each' activesupport (3.0.3) lib/active_support/dependencies.rb:521:in `remove_unloadable_constants!' activesupport (3.0.3) lib/active_support/dependencies.rb:317:in `clear' railties (3.0.3) lib/rails/application/bootstrap.rb:60:in `_callback_after_7' activesupport (3.0.3) lib/active_support/callbacks.rb:419:in `_run_call_callbacks' actionpack (3.0.3) lib/action_dispatch/middleware/callbacks.rb:44:in `call' rack (1.2.1) lib/rack/sendfile.rb:107:in `call' actionpack (3.0.3) lib/action_dispatch/middleware/remote_ip.rb:48:in `call' actionpack (3.0.3) lib/action_dispatch/middleware/show_exceptions.rb:46:in `call' railties (3.0.3) lib/rails/rack/logger.rb:13:in `call' rack (1.2.1) lib/rack/runtime.rb:17:in `call' activesupport (3.0.3) lib/active_support/cache/strategy/local_cache.rb:72:in `call' rack (1.2.1) lib/rack/lock.rb:11:in `call' rack (1.2.1) lib/rack/lock.rb:11:in `synchronize' rack (1.2.1) lib/rack/lock.rb:11:in `call' actionpack (3.0.3) lib/action_dispatch/middleware/static.rb:30:in `call' railties (3.0.3) lib/rails/application.rb:168:in `call' railties (3.0.3) lib/rails/application.rb:77:in `send' railties (3.0.3) lib/rails/application.rb:77:in `method_missing' railties (3.0.3) lib/rails/rack/log_tailer.rb:14:in `call' rack (1.2.1) lib/rack/content_length.rb:13:in `call' rack (1.2.1) lib/rack/handler/webrick.rb:52:in `service' /Volumes/files/jeffdeville/.rvm/rubies/ree-1.8.7-2010.02/lib/ruby/1.8/webrick/httpserver.rb:104:in `service' /Volumes/files/jeffdeville/.rvm/rubies/ree-1.8.7-2010.02/lib/ruby/1.8/webrick/httpserver.rb:65:in `run' /Volumes/files/jeffdeville/.rvm/rubies/ree-1.8.7-2010.02/lib/ruby/1.8/webrick/server.rb:173:in `start_thread' /Volumes/files/jeffdeville/.rvm/rubies/ree-1.8.7-2010.02/lib/ruby/1.8/webrick/server.rb:162:in `start' /Volumes/files/jeffdeville/.rvm/rubies/ree-1.8.7-2010.02/lib/ruby/1.8/webrick/server.rb:162:in `start_thread' /Volumes/files/jeffdeville/.rvm/rubies/ree-1.8.7-2010.02/lib/ruby/1.8/webrick/server.rb:95:in `start' /Volumes/files/jeffdeville/.rvm/rubies/ree-1.8.7-2010.02/lib/ruby/1.8/webrick/server.rb:92:in `each' /Volumes/files/jeffdeville/.rvm/rubies/ree-1.8.7-2010.02/lib/ruby/1.8/webrick/server.rb:92:in `start' /Volumes/files/jeffdeville/.rvm/rubies/ree-1.8.7-2010.02/lib/ruby/1.8/webrick/server.rb:23:in `start' /Volumes/files/jeffdeville/.rvm/rubies/ree-1.8.7-2010.02/lib/ruby/1.8/webrick/server.rb:82:in `start' rack (1.2.1) lib/rack/handler/webrick.rb:13:in `run' rack (1.2.1) lib/rack/server.rb:213:in `start' railties (3.0.3) lib/rails/commands/server.rb:65:in `start' railties (3.0.3) lib/rails/commands.rb:30 railties (3.0.3) lib/rails/commands.rb:27:in `tap' railties (3.0.3) lib/rails/commands.rb:27 script/rails:6:in `require' script/rails:6

Read the article

Java app makes screen display unresponsive after 10 minutes of user idle time

- by Ross

I've written a Java app that allows users to script mouse/keyboard input (JMacro, link not important, only for the curious). I personally use the application to automate character actions in an online game overnight while I sleep. Unfortunately, I keep coming back to the computer in the morning to find it unresponsive. Upon further testing, I'm finding that my application causes the computer to become unresponsive after about 10 minutes of user idle time (even if the application itself it simulating user activity). I can't seem to pin-point the issue, so I'm hoping somebody else might have a suggestion of where to look or what might be causing the issue. The relevant symptoms and characteristics: Unresponsiveness occurs after user is idle for 10 minutes User can still move the mouse pointer around the screen Everything but the mouse appears frozen... mouse clicks have no effect and no applications update their displays, including the Windows 7 desktop I left the task manager up along the with the app overnight so I could see the last task manager image before the screen freezes... the Java app is at normal CPU/Memory usage and total CPU usage is only ~1% After moving the mouse (in other words, the user comes back from being idle), the screen image starts updating again within 30 minutes (this is very hit and miss... sometimes 10 minutes, sometimes no results after two hours) User can CTRL-ALT-DEL to get to Windows 7's CTRL-ALT-DEL screen (after a 30 second pause). User is still able to move mouse pointer, but clicking any of the button options causes the screen to appear to freeze again On some very rare occasions, the system never freezes, and I come back to it in the morning with full responsiveness The Java app automatically stops input scripting in the middle of the night, so Windows 7 detects "real" idleness and turns the monitors into Standby mode... which they successfully come out of upon manually moving the mouse in the morning when I wake up, even though the desktop display still appears frozen Given the symptoms and characteristics of the issue, it's as if the Java app is causing the desktop display of the logged in user to stop updating, including any running applications. Programming concepts and Java packages used: Multi-threading Standard out and err are rerouted to a javax.swing.JTextArea The application uses a Swing GUI awt.Robot (very heavily used) awt.PointerInfo awt.MouseInfo System Specs: Windows 7 Professional Java 1.6.0 u17 In conclusion, I should stress that I'm not looking for any specific solutions, as I'm not asking a very specific question. I'm just wondering if anybody has run into a similar problem when using the Java libraries that I'm using. I would also gladly appreciate any suggestions for things to try to attempt to further pinpoint what is causing my problem. Thanks! Ross PS, I'll post an update/answer if I manage to stumble across anything else while I continue to debug this.

Read the article

Connection hangs after time of inactivity

- by Sinuhe

In my application, Spring manages connection pool for database access. Hibernate uses these connections for its queries. At first glance, I have no problems with the pool: it works correctly with concurrent clients and a pool with only one connection. I can execute a lot of queries, so I think that I (or Spring) don't leave open connections. My problem appears after some time of inactivity (sometimes 30 minutes, sometimes more than 2 hours). Then, when Hibernate does some search, it lasts too much. Setting log4j level to TRACE, I get this logs: ... 18:27:01 DEBUG nsactionSynchronizationManager - Retrieved value [org.springframework.orm.hibernate3.SessionHolder@99abd7] for key [org.hibernate.impl.SessionFactoryImpl@7d2897] bound to thread [http-8080-Processor24] 18:27:01 DEBUG HibernateTransactionManager - Found thread-bound Session [org.hibernate.impl.SessionImpl@8878cd] for Hibernate transaction 18:27:01 DEBUG HibernateTransactionManager - Using transaction object [org.springframework.orm.hibernate3.HibernateTransactionManager$HibernateTransactionObject@1b2ffee] 18:27:01 DEBUG HibernateTransactionManager - Creating new transaction with name [com.acjoventut.service.GenericManager.findByExample]: PROPAGATION_REQUIRED,ISOLATION_DEFAULT 18:27:01 DEBUG HibernateTransactionManager - Preparing JDBC Connection of Hibernate Session [org.hibernate.impl.SessionImpl@8878cd] 18:27:01 TRACE SessionImpl - setting flush mode to: AUTO 18:27:01 DEBUG JDBCTransaction - begin 18:27:01 DEBUG ConnectionManager - opening JDBC connection Here it gets frozen for about 2 - 10 minutes. But then continues: 18:30:11 DEBUG JDBCTransaction - current autocommit status: true 18:30:11 DEBUG JDBCTransaction - disabling autocommit 18:30:11 TRACE JDBCContext - after transaction begin 18:30:11 DEBUG HibernateTransactionManager - Exposing Hibernate transaction as JDBC transaction [jdbc:oracle:thin:@212.31.39.50:30998:orcl, UserName=DEVELOP, Oracle JDBC driver] 18:30:11 DEBUG nsactionSynchronizationManager - Bound value [org.springframework.jdbc.datasource.ConnectionHolder@843a9d] for key [org.apache.commons.dbcp.BasicDataSource@7745fd] to thread [http-8080-Processor24] 18:30:11 DEBUG nsactionSynchronizationManager - Initializing transaction synchronization ... After that, it works with no problems, until another period of inactivity. IMHO, it seems like connection pool returns an invalid/closed connection, and when Hibernate realizes that, ask another connection to the pool. I don't know how can I solve this problem or things I can do for delimiting it. Any help achieving this will be appreciate. Thanks. EDIT: Well, it finally was due a firewall rule. Database detects the connection is lost, but pool (dbcp or c3p0) not. So, it tries to query the database with no success. What is still strange for me is that timeout period is very variable. Maybe the rule is specially strange or firewall doesn't work correctly. Anyway, I have no access to that machine and I can only wait for an explanation. :(

Read the article

Monitoring UDP socket in glib(mm) eats up CPU time

- by Gyorgy Szekely

Hi, I have a GTKmm Windows application (built with MinGW) that receives UDP packets (no sending). The socket is native winsock and I use glibmm IOChannel to connect it to the application main loop. The socket is read with recvfrom. My problem is: this setup eats 25% percent CPU time on a 3GHz workstation. Can somebody tell me why? The application is idle in this case, and if I remove the UDP code, CPU usage drops down to almost zero. As the application has to perform some CPU intensive tasks, I could image better ways to spend that 25% Here are some code excerpts: (sorry for the printf's ;) ) /* bind */ void UDPInterface::bindToPort(unsigned short port) { struct sockaddr_in target; WSADATA wsaData; target.sin_family = AF_INET; target.sin_port = htons(port); target.sin_addr.s_addr = 0; if ( WSAStartup ( 0x0202, &wsaData ) ) { printf("WSAStartup failed!\n"); exit(0); // :) WSACleanup(); } sock = socket( AF_INET, SOCK_DGRAM, 0 ); if (sock == INVALID_SOCKET) { printf("invalid socket!\n"); exit(0); } if (bind(sock,(struct sockaddr*) &target, sizeof(struct sockaddr_in) ) == SOCKET_ERROR) { printf("failed to bind to port!\n"); exit(0); } printf("[UDPInterface::bindToPort] listening on port %i\n", port); } /* read */ bool UDPInterface::UDPEvent(Glib::IOCondition io_condition) { recvfrom(sock, (char*)buf, BUF_SIZE*4, 0, NULL, NULL); /* process packet... */ } /* glibmm connect */ Glib::RefPtr channel = Glib::IOChannel::create_from_win32_socket(udp.sock); Glib::signal_io().connect( sigc::mem_fun(udp, &UDPInterface::UDPEvent), channel, Glib::IO_IN ); I've read here in some other question, and also in glib docs (g_io_channel_win32_new_socket()) that the socket is put into nonblocking mode, and it's "a side-effect of the implementation and unavoidable". Does this explain the CPU effect, it's not clear to me? Whether or not I use glib to access the socket or call recvfrom() directly doesn't seem to make much difference, since CPU is used up before any packet arrives and the read handler gets invoked. Also glibmm docs state that it's ok to call recvfrom() even if the socket is polled (Glib::IOChannel::create_from_win32_socket()) I've tried compiling the program with -pg and created a per function cpu usage report with gprof. This wasn't usefull because the time is not spent in my program, but in some external glib/glibmm dll.

Read the article

DNS resolution problems; dig SERVFAIL error

- by JustinP

I'm setting up a couple of dedicated servers, and having problems setting up my nameservers properly. One of these is a LEMP server (LAMP with nginx in place of Apache), and the other will function solely as an email server, running exim/dovecot/ASSP antispam (no Apache). The LEMP server is CentOS 5.5, with no control panel, while the email server is CentOS 5.5 as well, with cPanel/WHM. So, I've had problems getting DNS set up properly. I have two domains, each one pointing to one of these servers. The nameservers are registered correctly with the domain registrar, and the nameserver IPs are entered correctly as well. I've spoken to tech support at the registrar and they confirm that everything is set up on their end. Not knowing much about DNS, I googled nameservers and DNS until I nearly went blind, and spent hours messing with the configuration. Eventually, I got the LEMP server's DNS working properly (no cPanel). Pleased with this triumph, I'm trying to mimic that configuration and repeat the process with the email server, and it's just not happening. The nameserver starts and stops, but the domain doesn't resolve. Things I have tried Going through standard procedures to set up DNS in WHM Clearing all DNS information, uninstalling BIND, then reinstalling all of that and again going through WHM procedures for setting up DNS Clearing all DNS information, and setting up BIND via shell (completely outside of cPanel) by using my config and zone files from the LEMP server as a template named runs just fine, but nothing is resolving. When I "dig any example.com" I get a SERVFAIL message. Nslookups return no information. Here are my config and zone files. named.conf controls { inet 127.0.0.1 allow { localhost; } keys { coretext-key; }; }; options { listen-on port 53 { any; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; // Those options should be used carefully because they disable port // randomization // query-source port 53; // query-source-v6 port 53; allow-query { any; }; allow-query-cache { any; }; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; view "localhost_resolver" { match-clients { 127.0.0.0/24; }; match-destinations { localhost; }; recursion yes; //zone "." IN { // type hint; // file "/var/named/named.ca"; //}; include "/etc/named.rfc1912.zones"; }; view "internal" { /* This view will contain zones you want to serve only to "internal" clients that connect via your directly attached LAN interfaces - "localnets" . */ match-clients { localnets; }; match-destinations { localnets; }; recursion yes; zone "." IN { type hint; file "/var/named/named.ca"; }; // include "/var/named/named.rfc1912.zones"; // you should not serve your rfc1912 names to non-localhost clients. // These are your "authoritative" internal zones, and would probably // also be included in the "localhost_resolver" view above : zone "example.com" { type master; file "data/db.example.com"; }; zone "3.2.1.in-addr.arpa" { type master; file "data/db.1.2.3"; }; }; view "external" { /* This view will contain zones you want to serve only to "external" clients * that have addresses that are not on your directly attached LAN interface subnets: */ match-clients { any; }; match-destinations { any; }; recursion no; // you'd probably want to deny recursion to external clients, so you don't // end up providing free DNS service to all takers allow-query-cache { none; }; // Disable lookups for any cached data and root hints // all views must contain the root hints zone: //include "/etc/named.rfc1912.zones"; zone "." IN { type hint; file "/var/named/named.ca"; }; zone "example.com" { type master; file "data/db.example.com"; }; zone "3.2.1.in-addr.arpa" { type master; file "data/db.1.2.3"; }; }; include "/etc/rndc.key"; db.example.com $TTL 1D ; ; Zone file for example.com ; ; Mandatory minimum for a working domain ; @ IN SOA ns1.example.com. contact.example.com. ( 2011042905 ; serial 8H ; refresh 2H ; retry 4W ; expire 1D ; default_ttl ) NS ns1.example.com. NS ns2.example.com. ns1 A 1.2.3.4 ns2 A 1.2.3.5 example.com. A 1.2.3.4 localhost A 127.0.0.1 www CNAME example.com. mail CNAME example.com. ; db.1.2.3 $TTL 1D $ORIGIN 3.2.1.in-addr.arpa. @ IN SOA ns1.example.com contact.example.com. ( 2011042908 ; 8H ; 2H ; 4W ; 1D ; ) NS ns1.example.com. NS ns2.example.com. 4 PTR hostname.example.com. 5 PTR hostname.example.com. ; Also of note: both of these servers are managed. Tech support is very responsive, and largely useless. Hours go by with them asking me questions to narrow down what could be wrong, then they pass the ticket to the tech on the next shift, who ignores everything that's happened already and spend his whole shift asking all the same questions the last guy asked. So, in summary: *Nameservers, with IPs, are correctly registered with domain registrar *named is configured and running *...and must not be configured correctly, because nothing resolves. Any help would be great. I changed domains and IPs in the files to generics, but let me know if you need to know the domain in question. Thanks! UPDATE I found that I didn't have 127.0.0.1 in /etc/resolv.conf, so I added it, along with my two public IPs that I have named listening on. resolv.conf search www.example.com example.com nameserver 127.0.0.1 nameserver 7.8.9.10 ;Was in here by default, authoritative nameserver of hosting company nameserver 1.2.3.4 ;Public IP #1 nameserver 1.2.3.5 ;Public IP #2 Now when I DIG example.com from the host, it resolves. If I try to DIG from my other server (in the same datacenter), or from the internet, it times out or I get SERVFAIL.

Read the article

c++ class member functions instatiated by traits

- by Jive Dadson

I am reluctant to say I can't figure this out, but I can't figure this out. I've googled and searched stackoverflow, and come up empty. The abstract, and possibly overly vague form of the question is, how can I use the traits-pattern to instantiate non-virtual member functions? The question came up while modernizing a set of multivariate function optimizers that I wrote more than 10 years ago. The optimizers all operate by selecting a straight-line path through the parameter space away from the current best point (the "update"), then finding a better point on that line (the "line search"), then testing for the "done" condition, and if not done, iterating. There are different methods for doing the update, the line-search, and conceivably for the done test, and other things. Mix and match. Different update formulae require different state-variable data. For example, the LMQN update requires a vector, and the BFGS update requires a matrix. If evaluating gradients is cheap, the line-search should do so. If not, it should use function evaluations only. Some methods require more accurate line-searches than others. Those are just some examples. The original version instantiates several of the combinations by means of virtual functions. Some traits are selected by setting mode bits that are tested at runtime. Yuck. It would be trivial to define the traits with #define's and the member functions with #ifdef's and macros. But that's so twenty years ago. It bugs me that I cannot figure out a whiz-bang modern way. If there were only one trait that varied, I could use the curiously recurring template pattern. But I see no way to extend that to arbitrary combinations of traits. I tried doing it using boost::enable_if, etc.. The specialized state info was easy. I managed to get the functions done, but only by resorting to non-friend external functions that have the this-pointer as a parameter. I never even figured out how to make the functions friends, much less member functions. The compiler (vc++ 2008) always complained that things didn't match. I would yell, "SFINAE, you moron!" but the moron is probably me. Perhaps tag-dispatch is the key. I haven't gotten very deeply into that. Surely it's possible, right? If so, what is best practice?

Read the article

Rails send mail with GMail

- by Danny McClelland

Hi Everyone, I am on rails 2.3.5 and have the latest Ruby installed and my application is running well, except, GMail emails. I am trying to setup my gmail imap connection which has worked previously but now doesnt want to know. This is my code: # Be sure to restart your server when you modify this file # Uncomment below to force Rails into production mode when # you don't control web/app server and can't set it the proper way # ENV['RAILS_ENV'] ||= 'production' # Specifies gem version of Rails to use when vendor/rails is not present RAILS_GEM_VERSION = '2.3.5' unless defined? RAILS_GEM_VERSION # Bootstrap the Rails environment, frameworks, and default configuration require File.join(File.dirname(__FILE__), 'boot') Rails::Initializer.run do |config| # Gems config.gem "capistrano-ext", :lib => "capistrano" config.gem "configatron" # Make Time.zone default to the specified zone, and make Active Record store time values # in the database in UTC, and return them converted to the specified local zone. config.time_zone = "London" # The internationalization framework can be changed to have another default locale (standard is :en) or more load paths. # All files from config/locales/*.rb,yml are added automatically. # config.i18n.load_path << Dir[File.join(RAILS_ROOT, 'my', 'locales', '*.{rb,yml}')] #config.i18n.default_locale = :de # Your secret key for verifying cookie session data integrity. # If you change this key, all old sessions will become invalid! # Make sure the secret is at least 30 characters and all random, # no regular words or you'll be exposed to dictionary attacks. config.action_controller.session = { :session_key => '_base_session', :secret => '7389ea9180b15f1495a5e73a69a893311f859ccff1ffd0fa2d7ea25fdf1fa324f280e6ba06e3e5ba612e71298d8fbe7f15fd7da2929c45a9c87fe226d2f77347' } config.active_record.observers = :user_observer end ActiveSupport::CoreExtensions::Date::Conversions::DATE_FORMATS.merge!(:default => '%d/%m/%Y') ActiveSupport::CoreExtensions::Time::Conversions::DATE_FORMATS.merge!(:default => '%d/%m/%Y') require "will_paginate" ActionMailer::Base.delivery_method = :smtp ActionMailer::Base.smtp_settings = { :enable_starttls_auto => true, :address => "smtp.gmail.com", :port => 587, :domain => "XXXXXXXX.XXX", :authentication => :plain, :user_name => "XXXXXXXXXX.XXXXXXXXXX.XXX", :password => "XXXXX" } But the above just results in an SMTP auth error in the production log. I have read varied reports of this not working in Rails 2.2.2 but nothing for 2.3.5, anyone got any ideas? Thanks, Danny

Read the article

.NET AES returns wrong Test Vectors

- by ralu

I need to implement some crypto protocol on C# and want to say that this is my first project in C#. After spending some time to get used on C# I found out that I am unable to get compliant AES vectors. using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Security.Cryptography; using System.IO; namespace ConsoleApplication1 { class Program { public static void Main() { try { //test vectors from "ecb_vk.txt" byte[] key = { 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; byte[] data = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; byte[] encTest = { 0x0e, 0xdd, 0x33, 0xd3, 0xc6, 0x21, 0xe5, 0x46, 0x45, 0x5b, 0xd8, 0xba, 0x14, 0x18, 0xbe, 0xc8 }; AesManaged aesAlg = new AesManaged(); aesAlg.BlockSize = 128; aesAlg.Key = key; aesAlg.Mode = CipherMode.ECB; ICryptoTransform encryptor = aesAlg.CreateEncryptor(); MemoryStream msEncrypt = new MemoryStream(); CryptoStream csEncrypt = new CryptoStream(msEncrypt, encryptor, CryptoStreamMode.Write); StreamWriter swEncrypt = new StreamWriter(csEncrypt); swEncrypt.Write(data); swEncrypt.Close(); csEncrypt.Close(); msEncrypt.Close(); aesAlg.Clear(); byte[] encr; encr = msEncrypt.ToArray(); string datastr = BitConverter.ToString(data); string encrstr = BitConverter.ToString(encr); string encTestStr = BitConverter.ToString(encTest); Console.WriteLine("data: {0}", datastr); Console.WriteLine("encr: {0}", encrstr); Console.WriteLine("should: {0}", encTestStr); Console.ReadKey(); } catch (Exception e) { Console.WriteLine("Error: {0}", e.Message); } } } } Output is wrong: data: 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 encr: A0-3C-C2-22-A4-32-F7-C9-BA-36-AE-73-66-BD-BB-A3 should: 0E-DD-33-D3-C6-21-E5-46-45-5B-D8-BA-14-18-BE-C8 I am sure that there is a correct AES implementation in .NET, so I need some advice from a .NET wizard to help with this.

Read the article

Combobox INotifyPropertyChanged event not raised!!!

- by nagiah

I created a combobox and set observable collection as the itemsource and implemented INotifyPropertyChanged on the observable collection item. Even after that, when I select different item in the combobox, the OnPropertyChange method is not invoked. I think I am not making the binding properly. Could any one please correct me/ suggest me in this regard. ---------------------------------MainPage.xaml--------------------------------------------------- <StackPanel Width="300"> <ComboBox Name="cboName"></ComboBox> <TextBox Name="tbxName" Text="{Binding Path=name,Mode=TwoWay,ElementName=cboName}" ></TextBox> </StackPanel> ---------------------------MainPage.xaml.cs----------------------------------------------- using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using System.Collections.ObjectModel; using System.Collections.Specialized; using System.ComponentModel; namespace MasterDetailsUpdate { public partial class MainPage : UserControl { public MainPage() { InitializeComponent(); Loaded += new RoutedEventHandler(MainPage_Loaded); } void MainPage_Loaded(object sender, RoutedEventArgs e) { ObservableCollection<Person> persons = new ObservableCollection<Person>(); persons.Add(new Person { city = "c1", name = "n1" }); persons.Add(new Person { city = "c2", name = "n2" }); persons.Add(new Person { city = "c3", name = "" }); persons.Add(new Person { city = "c4", name = "" }); persons.Add(new Person { city = "c5", name = "n1" }); cboName.ItemsSource = persons; cboName.DisplayMemberPath = "name"; } } public class Person : INotifyPropertyChanged { private string _name; private string _city; public string name { set { _name = value; OnPropertyChanged("name"); } get { return _name; } } public string city { set { _city = value; OnPropertyChanged("city"); } get { return _city; } } #region INotifyPropertyChanged Members public event PropertyChangedEventHandler PropertyChanged; private void OnPropertyChanged(string propertyName) { if (PropertyChanged != null) { this.PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); } } #endregion } } Thank You

Read the article

MODX parse error function implode (is it me or modx?)

- by Ian

Hi, I cannot for the life of me figure this out, maybe someone can help. Using MODX a form takes user criteria to create a filter and return a list of documents. The form is one text field and a few checkboxes. If both text field and checkbox data is posted, the function works fine; if just the checkbox data is posted the function works fine; but if just the text field data is posted, modx gives me the following error: Error: implode() [function.implode]: Invalid arguments passed. I've tested this outside of modx with flat files and it all works fine leading me to assume a bug exists within modx. But I'm not convinced. Here's my code: <?php $order = array('price ASC'); //default sort order if(!empty($_POST['tour_finder_duration'])){ //duration submitted $days = htmlentities($_POST['tour_finder_duration']); //clean up post array_unshift($order,"duration DESC"); //add duration sort before default $filter[] = 'duration,'.$days.',4'; //add duration to filter[] (field,criterion,mode) $criteria[] = 'Number of days: <strong>'.$days.'</strong>'; //displayed on results page } if(!empty($_POST['tour_finder_dests'])){ //destination/s submitted $dests = $_POST['tour_finder_dests']; foreach($dests as $value){ //iterate through dests array $filter[] = 'searchDests,'.htmlentities($value).',7'; //add dests to filter[] $params['docid'] = $value; $params['field'] = 'pagetitle'; $pagetitle = $modx->runSnippet('GetField',$params); $dests_array[] = '<a href="[~'.$value.'~]" title="Read more about '.$pagetitle.'" class="tourdestlink">'.$pagetitle.'</a>'; } $dests_array = implode(', ',$dests_array); $criteria[] = 'Destinations: '.$dests_array; //displayed on results page } if(is_array($filter)){ $filter = implode('|',$filter);//pipe-separated string } if(is_array($order)){ $order = implode(',',$order);//comma-separated string } if(is_array($criteria)){ $criteria = implode('<br />',$criteria); } echo '<br />Order: '.$order.'<br /> Filter: '.$filter.'<br /> Criteria: '.$criteria; //next: extract docs using $filter and $order, display user's criteria using $criteria... ?> The echo statement is displayed above the MODX error message and the $filter array is correctly imploded. Any help will save my computer from flying out the window. Thanks

Read the article

Error With Sending mail (kSKPSMTPPartMessageKey is nil)

- by user1553381

I'm trying to send mail in iPhone using "SKPSMTPMessage" and I added the libraries, In my class I added the following code: - (IBAction)sendMail:(id)sender { // if there are a connection if ([theConnection isEqualToString:@"true"]) { if ([fromEmail.text isEqualToString:@""] || [toEmail.text isEqualToString:@""]) { UIAlertView *warning = [[UIAlertView alloc] initWithTitle:@"?????" message:@"?? ??? ????? ???? ????????" delegate:self cancelButtonTitle:@"?????" otherButtonTitles:nil, nil]; [warning show]; }else { SKPSMTPMessage *test_smtp_message = [[SKPSMTPMessage alloc] init]; test_smtp_message.fromEmail = fromEmail.text; test_smtp_message.toEmail = toEmail.text; test_smtp_message.relayHost = @"smtp.gmail.com"; test_smtp_message.requiresAuth = YES; test_smtp_message.login = @"[email protected]"; test_smtp_message.pass = @"myPass"; test_smtp_message.wantsSecure = YES; NSString *subject= @"Suggest a book for you"; test_smtp_message.subject = [NSString stringWithFormat:@"%@ < %@ > ",fromEmail.text, subject]; test_smtp_message.delegate = self; NSMutableArray *parts_to_send = [NSMutableArray array]; NSDictionary *plain_text_part = [NSDictionary dictionaryWithObjectsAndKeys: @"text/plain\r\n\tcharset=UTF-8;\r\n\tformat=flowed", kSKPSMTPPartContentTypeKey, [messageBody.text stringByAppendingString:@"\n"], kSKPSMTPPartMessageKey, @"quoted-printable", kSKPSMTPPartContentTransferEncodingKey, nil]; [parts_to_send addObject:plain_text_part]; // to send attachment NSString *image_path = [[NSBundle mainBundle] pathForResource:BookCover ofType:@"jpg"]; NSData *image_data = [NSData dataWithContentsOfFile:image_path]; NSDictionary *image_part = [NSDictionary dictionaryWithObjectsAndKeys: @"inline;\r\n\tfilename=\"image.png\"",kSKPSMTPPartContentDispositionKey, @"base64",kSKPSMTPPartContentTransferEncodingKey, @"image/png;\r\n\tname=Success.png;\r\n\tx-unix-mode=0666",kSKPSMTPPartContentTypeKey, [image_data encodeWrappedBase64ForData],kSKPSMTPPartMessageKey, nil]; [parts_to_send addObject:image_part]; test_smtp_message.parts = parts_to_send; Spinner.hidden = NO; [Spinner startAnimating]; ProgressBar.hidden = NO; HighestState = 0; [test_smtp_message send]; } }else { UIAlertView *alertNoconnection = [[UIAlertView alloc] initWithTitle:@"?????" message:@"?? ???? ???? " delegate:self cancelButtonTitle:@"?????" otherButtonTitles:nil, nil]; [alertNoconnection show]; } } but when I tried to send it gives me the following Exception: *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[NSCFString appendString:]: nil argument' and it highlighted this line in SKPSMTPMessage.m [message appendString:[part objectForKey:kSKPSMTPPartMessageKey]]; and I Can't understand what is nil exactly Can Anyone help me in this issue? Thanks in Advance.

Search Results

Search found 12754 results on 511 pages for 'cached mode'.

Page 472/511 | < Previous Page | 468 469 470 471 472 473 474 475 476 477 478 479 | Next Page >

- by sah302

- by yunas

- by marqss

- by IRHM

- by torsten

- by lpfavreau

- by valdo

- by kaefert

- by avani-nature

- by user3731783

- by Stefanos Kargas

- by Mark Struzinski

- by Jason

- by Jeff D

- by Ross

- by Sinuhe

- by Gyorgy Szekely

- by JustinP

- by Jive Dadson

- by Alex

- by Danny McClelland

- by ralu

- by nagiah

- by Ian

- by user1553381

< Previous Page | 468 469 470 471 472 473 474 475 476 477 478 479 | Next Page >