Search Results

Search found 18736 results on 750 pages for 'support lifecycle'.

Page 472/750 | < Previous Page | 468 469 470 471 472 473 474 475 476 477 478 479  | Next Page >

  • Experiences with Google TiSP?

    - by Zypher
    i got an email from google a couple of hours ago (around 12AM EST today) that Google's TiSP service is now available in my area. this seems like a great deal compared to my cUrrent 16Mbps cable coNction at work, however i'm a lIttle nervous about the fact that linux support is "Coming soon". i was wOndering if anyone had successfully installed this system and gotten it woRking with their linux infrastructure? I'm assuming that there shouldn't be any issues siNce we have an ASA in front of our internet. TiSP Shouldn't care what is behind that. Any insight would be greatly appreciated!

    Read the article

  • Windows xp problems

    - by anca
    I had problems with web virus cake 3.00 and I downloaded Malwarebytes Anti-WALWARE, I got rid of that virus but I did other problems. When I open my PC appears to skype error "exception in module Skype.exe at 0013CE7D.The EOleSysError RPC server is unavailable" and another one "Error in C: \ WINDOWS \ system32 \ Nvcpl.Dll Missing entry: NnStartup" when I install / uninstall a program says "Windows Installer service Could you not be accessed. This CAN occure if you are running Windows in safe mode, or if the Windows Installer is not corectly installes. Contact your support personnel for assistance. I have tried many "solutions" but nothing worked. Please HELP! It windows xp sp 2

    Read the article

  • Web Server for SVN+PHP+Django+Rails

    - by NetStudent
    Foreword: I am not asking for the differences between Nginx and Apache, nor do I want to start a "which one is better discussion. I would like to ask for help with choosing the most adequate solution for this particular situation. I need to setup one or more l SVN repositories accessible via HTTP, plus some PHP, Django and Ruby websites. However, and since I only have 512Mb of RAM at my disposal, I fear that Apache will be a too heavy choice... On the other hand, I have heard that Nginx does not fully support SVN (WebDAV) and Django without reverse proxying to Apache. Is this still true? Should I go for Apache/Nginx alone? Or should I set up both and have Nginx handling static content and proxying to Apacge for dynamic content?

    Read the article

  • Oracle Solaris Zones Physical to virtual (P2V)

    - by user939057
    IntroductionThis document describes the process of creating and installing a Solaris 10 image build from physical system and migrate it into a virtualized operating system environment using the Oracle Solaris 10 Zones Physical-to-Virtual (P2V) capability.Using an example and various scenarios, this paper describes how to take advantage of theOracle Solaris 10 Zones Physical-to-Virtual (P2V) capability with other Oracle Solaris features to optimize performance using the Solaris 10 resource management advanced storage management using Solaris ZFS plus improving operating system visibility with Solaris DTrace. The most common use for this tool is when performing consolidation of existing systems onto virtualization enabled platforms, in addition to that we can use the Physical-to-Virtual (P2V) capability  for other tasks for example backup your physical system and move them into virtualized operating system environment hosted on the Disaster Recovery (DR) site another option can be building an Oracle Solaris 10 image repository with various configuration and a different software packages in order to reduce provisioning time.Oracle Solaris ZonesOracle Solaris Zones is a virtualization and partitioning technology supported on Oracle Sun servers powered by SPARC and Intel processors.This technology provides an isolated and secure environment for running applications. A zone is a virtualized operating system environment created within a single instance of the Solaris 10 Operating System.Each virtual system is called a zone and runs a unique and distinct copy of the Solaris 10 operating system.Oracle Solaris Zones Physical-to-Virtual (P2V)A new feature for Solaris 10 9/10.This feature provides the ability to build a Solaris 10 images from physical system and migrate it into a virtualized operating system environmentThere are three main steps using this tool1. Image creation on the source system, this image includes the operating system and optionally the software in which we want to include within the image. 2. Preparing the target system by configuring a new zone that will host the new image.3. Image installation on the target system using the image we created on step 1. The host, where the image is built, is referred to as the source system and the host, where theimage is installed, is referred to as the target system. Benefits of Oracle Solaris Zones Physical-to-Virtual (P2V)Here are some benefits of this new feature:  Simple- easy build process using Oracle Solaris 10 built-in commands.  Robust- based on Oracle Solaris Zones a robust and well known virtualization technology.  Flexible- support migration between V series servers into T or -M-series systems.For the latest server information, refer to the Sun Servers web page. PrerequisitesThe target Oracle Solaris system should be running the latest version of the patching patch cluster. and the minimum Solaris version on the target system should be Solaris 10 9/10.Refer to the latest Administration Guide for Oracle Solaris for a complete procedure on how todownload and install Oracle Solaris. NOTE: If the source system that used to build the image is an older version then the targetsystem, then during the process, the operating system will be upgraded to Solaris 10 9/10(update on attach).Creating the Image Used to distribute the software.We will create an image on the source machine. We can create the image on the local file system and then transfer it to the target machine, or build it into a NFS shared storage andmount the NFS file system from the target machine.Optional  before creating the image we need to complete the software installation that we want to include with the Solaris 10 image.An image is created by using the flarcreate command:Source # flarcreate -S -n s10-system -L cpio /var/tmp/solaris_10_up9.flarThe command does the following:  -S specifies that we skip the disk space check and do not write archive size data to the archive (faster).  -n specifies the image name.  -L specifies the archive format (i.e cpio). Optionally, we can add descriptions to the archive identification section, which can help to identify the archive later.Source # flarcreate -S -n s10-system -e "Oracle Solaris with Oracle DB10.2.0.4" -a "oracle" -L cpio /var/tmp/solaris_10_up9.flarYou can see example of the archive identification section in Appendix A: archive identification section.We can compress the flar image using the gzip command or adding the -c option to the flarcreate commandSource # gzip /var/tmp/solaris_10_up9.flarAn md5 checksum can be created for the image in order to ensure no data tamperingSource # digest -v -a md5 /var/tmp/solaris_10_up9.flar Moving the image into the target system.If we created the image on the local file system, we need to transfer the flar archive from the source machine to the target machine.Source # scp /var/tmp/solaris_10_up9.flar target:/var/tmpConfiguring the Zone on the target systemAfter copying the software to the target machine, we need to configure a new zone in order to host the new image on that zone.To install the new zone on the target machine, first we need to configure the zone (for the full zone creation options see the following link: http://docs.oracle.com/cd/E18752_01/html/817-1592/index.html  )ZFS integrationA flash archive can be created on a system that is running a UFS or a ZFS root file system.NOTE: If you create a Solaris Flash archive of a Solaris 10 system that has a ZFS root, then bydefault, the flar will actually be a ZFS send stream, which can be used to recreate the root pool.This image cannot be used to install a zone. You must create the flar with an explicit cpio or paxarchive when the system has a ZFS root.Use the flarcreate command with the -L archiver option, specifying cpio or pax as themethod to archive the files. (For example, see Step 1 in the previous section).Optionally, on the target system you can create the zone root folder on a ZFS file system inorder to benefit from the ZFS features (clones, snapshots, etc...).Target # zpool create zones c2t2d0 Create the zone root folder:Target # chmod 700 /zones Target # zonecfg -z solaris10-up9-zonesolaris10-up9-zone: No such zone configuredUse 'create' to begin configuring a new zone.zonecfg:solaris10-up9-zone> createzonecfg:solaris10-up9-zone> set zonepath=/zoneszonecfg:solaris10-up9-zone> set autoboot=truezonecfg:solaris10-up9-zone> add netzonecfg:solaris10-up9-zone:net> set address=192.168.0.1zonecfg:solaris10-up9-zone:net> set physical=nxge0zonecfg:solaris10-up9-zone:net> endzonecfg:solaris10-up9-zone> verifyzonecfg:solaris10-up9-zone> commitzonecfg:solaris10-up9-zone> exit Installing the Zone on the target system using the imageInstall the configured zone solaris10-up9-zone by using the zoneadm command with the install -a option and the path to the archive.The following example shows how to create an Image and sys-unconfig the zone.Target # zoneadm -z solaris10-up9-zone install -u -a/var/tmp/solaris_10_up9.flarLog File: /var/tmp/solaris10-up9-zone.install_log.AJaGveInstalling: This may take several minutes...The following example shows how we can preserve system identity.Target # zoneadm -z solaris10-up9-zone install -p -a /var/tmp/solaris_10_up9.flar Resource management Some applications are sensitive to the number of CPUs on the target Zone. You need tomatch the number of CPUs on the Zone using the zonecfg command:zonecfg:solaris10-up9-zone>add dedicated-cpuzonecfg:solaris10-up9-zone> set ncpus=16DTrace integrationSome applications might need to be analyzing using DTrace on the target zone, you canadd DTrace support on the zone using the zonecfg command:zonecfg:solaris10-up9-zone>setlimitpriv="default,dtrace_proc,dtrace_user" Exclusive IP stack An Oracle Solaris Container running in Oracle Solaris 10 can have a shared IP stack with the global zone, or it can have an exclusive IP stack (which was released in Oracle Solaris 10 8/07). An exclusive IP stack provides a complete, tunable, manageable and independent networking stack to each zone. A zone with an exclusive IP stack can configure Scalable TCP (STCP), IP routing, IP multipathing, or IPsec. For an example of how to configure an Oracle Solaris zone with an exclusive IP stack, see the following example zonecfg:solaris10-up9-zone set ip-type=exclusivezonecfg:solaris10-up9-zone> add netzonecfg:solaris10-up9-zone> set physical=nxge0 When the installation completes, use the zoneadm list -i -v options to list the installedzones and verify the status.Target # zoneadm list -i -vSee that the new Zone status is installedID NAME STATUS PATH BRAND IP0 global running / native shared- solaris10-up9-zone installed /zones native sharedNow boot the ZoneTarget # zoneadm -z solaris10-up9-zone bootWe need to login into the Zone order to complete the zone set up or insert a sysidcfg file beforebooting the zone for the first time see example for sysidcfg file in Appendix B: sysidcfg filesectionTarget # zlogin -C solaris10-up9-zoneTroubleshootingIf an installation fails, review the log file. On success, the log file is in /var/log inside the zone. Onfailure, the log file is in /var/tmp in the global zone.If a zone installation is interrupted or fails, the zone is left in the incomplete state. Use uninstall -F to reset the zone to the configured state.Target # zoneadm -z solaris10-up9-zone uninstall -FTarget # zonecfg -z solaris10-up9-zone delete -FConclusionOracle Solaris Zones P2V tool provides the flexibility to build pre-configuredimages with different software configuration for faster deployment and server consolidation.In this document, I demonstrated how to build and install images and to integrate the images with other Oracle Solaris features like ZFS and DTrace.Appendix A: archive identification sectionWe can use the head -n 20 /var/tmp/solaris_10_up9.flar command in order to access theidentification section that contains the detailed description.Target # head -n 20 /var/tmp/solaris_10_up9.flarFlAsH-aRcHiVe-2.0section_begin=identificationarchive_id=e4469ee97c3f30699d608b20a36011befiles_archived_method=cpiocreation_date=20100901160827creation_master=mdet5140-1content_name=s10-systemcreation_node=mdet5140-1creation_hardware_class=sun4vcreation_platform=SUNW,T5140creation_processor=sparccreation_release=5.10creation_os_name=SunOScreation_os_version=Generic_142909-16files_compressed_method=nonecontent_architectures=sun4vtype=FULLsection_end=identificationsection_begin=predeploymentbegin 755 predeployment.cpio.ZAppendix B: sysidcfg file sectionTarget # cat sysidcfgsystem_locale=Ctimezone=US/Pacificterminal=xtermssecurity_policy=NONEroot_password=HsABA7Dt/0sXXtimeserver=localhostname_service=NONEnetwork_interface=primary {hostname= solaris10-up9-zonenetmask=255.255.255.0protocol_ipv6=nodefault_route=192.168.0.1}name_service=NONEnfs4_domain=dynamicWe need to copy this file before booting the zoneTarget # cp sysidcfg /zones/solaris10-up9-zone/root/etc/

    Read the article

  • Oracle VM 3.1.1 build 365 released

    - by wcoekaer
    A few days ago we released a patch update for Oracle VM 3.1.1 (build 365). Oracle VM Manager 3.1.1 Build 365 is now available from My Oracle Support patch ID 14227416 Oracle VM Server 3.1.1 errata updates are, as usual, released on ULN in the ovm3_3.1.1_x86_64_patch channel. Just a reminder, when we publish errata for Oracle VM, the notifications are sent through the oraclevm-errata maillist. You can sign up here. Some of the bugfixes in 3.1.1 : 14054162 - Removes unnecessary locks when creating VNICs in a multi-threaded operation. 14111234 - Fixes the issue when discovering a virtual machine that has disks in a un-discovered repository or has un-discovered physical disks. 14054133 - Fixes a bug of object not found where vdisks are left stale in certain multi-thread operations. 14176607 - Fixes the issue where Oracle VM Manager would hang after a restart due to various tasks running jobs in the global context. 14136410 - Fixes the stale lock issue on multithreaded server where object not found error happens in some rare situations. 14186058 - Fixes the issue where Oracle VM Manager fails to discover the server or start the server after the server hardware configuration (i.e. BIOS) was modified. 14198734 - Fixes the issue where HTTP cannot be disabled. 14065401 - Fixes Oracle VM Manager UI time-out issue where the default value was not long enough for storage repository creation. 14163755 - Fixes the issue when migrating a virtual machine the list of target servers (and "other servers") was not ordered by name. 14163762 - Fixes the size of the "Edit Vlan Group" window to display all information correctly. 14197783 - Fixes the issue that navigation tree (servers) was not ordered by name. I strongly suggest everyone to use this latest build and also update the server to the latest version. have at it.

    Read the article

  • Use router as external high powered Wi-Fi adapter

    - by skywinder
    I need a powerful external Wi-Fi adapter for a couple of days. I heard that some types of router support this mode, allowing me to connect the router to my notebook and just use it as an external Wi-Fi interface. Is it possible to connect a router as an external Wi-Fi adapter? How can I determine it? Updated: My purpose is to set the router to monitor mode and check networks around through my notebook to provide better configuration for my network (power, channels, etc). My internal notebook Wi-Fi adapter is too weak for this purpose. Should I use special drivers for that? If yes, can someone describe, step-by-step, how to do it? p.s. I want to use ASUS RT-N56U as an external Wi-Fi adapter on OS X or Ubuntu.

    Read the article

  • Avoiding double NAT with PPPoA connection

    - by user498429
    I've got an ASUS RT-N56U wending its way to me and have been thinking about how to set this up on my home network. I currently have a Netgear DG634g V5 and was hoping to use this device as a modem only, with everything else being done by the router. Problem is, my ISP uses PPPoA and the asus seems only to support PPPoE. I'm aware that a double NAT configuration should be avoided and I've seen some instructions here: http://www.tomshardware.co.uk/forum/33700-17-ultimate-modem-router-setup-thread Specifically, I was going to follow the guidance in the section entitled "Chaining Two Networks Together In a Cascading Fashion (Modem handles PPPoA)". That seems like it could work. However, is this a double NAT configuration or even a good way to do it? Would UPnP still work? The other option, I understand, is to buy the Draytek Vigor 120 but I'd ideally like to avoid the cost of that if its not necessary.

    Read the article

  • Keeping Xv Overlay configuration throughout an X session.

    - by kriss
    After upgrading my Linux system from Ubuntu 9.04 to Ubuntu 10.10, I suceeded correcting most problems (all related to Intel 82865G Integrated Graphics Adapter support and compiz is still not working but that's another matter) but for one I only have a partial solution. Whenever I play a video the colors are much too saturated. This is really a problem for tones of skins that appears reddish (everyone seems to be coming back from a ski vacation with deep sun burns). As this effect only occurs with videos, not with pictures, I finally figured out it was related to Video Overlays configuration and I can correct it typing: xvattr -a XV_SATURATION -v 120 This change the default saturation value, which is 500 and much too high in my case, at eye sight the correct value seems to be between 100 and 150. Now my problem is that I have to type the above command each time I run a video. If I type it before running the video it has no effect, if I close the video and open a new one, I have to type it again, etc. I tried to put it in Xsession and (logically) it has no effect either. How could I do to get the correct setting whenever I run a video without typing the above command every time ?

    Read the article

  • Dual External Monitors Through Docking Station on ASUS G73JW-XT1

    - by user60695
    I am getting an ASUS G73JW-XT1; and I would like to set it up so that I can plug it into a docking station at my desk, and use 2 external monitors (not the laptop display and an additional monitor). The computer supports a DVI and HDMI output, but I cannot find any docking stations that will support two external displays, as well as audio ports and USB ports for other peripherals. Does anybody know of a specific docking station that will do this, or another workaround without having to plug in several things to my laptop every time I bring it to my desk?

    Read the article

  • options' default values of autoconf ./configure scripts

    - by hamstergene
    Having run ./configure --help there is a list of options that can be tweaked in the future build, for example --enable-luajit Enable LuaJit Support --disable-env clearing/setting of ENV vars Though any option can be used with enable and disable prefix, some are presented as --enable-me and other as --disable-me in the help output. Is this supposed to hint me of default values, and if yes, how do I to figure them out? Because either way makes sense to me: luajit is disabled by default and therefore it is presented as --enable-luajit so I can enable it by conveniently copy-pasting it from help output to command line. being listed with --enable in help output indicates that luajit is enabled by default.

    Read the article

  • Restoring Box Sync (box.com) using physical media after OS reinstall

    - by sjrm
    I have my Box Folder on a different drive ( D: ) than my Operating System Drive ( C: ) I follow these instructions to set the local folder on the second drive. https://support.box.com/hc/en-us/articles/200852947-How-Can-I-Change-the-Default-Folder-Location-for-Box-Sync- I had to format and reinstall Windows 7, leaving the other drive (D: ) untouched. now i reinstalled Box Sync, and directed it to the same location where i already have all my files. However, Box Sync renamed the folder to (Box ([email protected]) ) as a bckup, and is downloading everything again. As i have like 30Gb of files, and it takes many hour to download them, i just want to use the files that i already have in my local disk. i tried copying all files again to the new local Box Folder, but files started to get duplicated. Is there any way to avoid downloading everything again each time i reinstall my OS ? Thanks

    Read the article

  • Windows replacement for HAProxy

    - by GrayWizardx
    It does not appear that there is a similar question to this already posted, so I will go ahead and ask. I am working on a project that could benefit from having two - four servers handling incoming requests to a backend webservice. The service does not require SSL but does need to support occassional long running processes (upto 120 secs). This project does not at present have the funding to purchase a hardware load balancing solution. I have previously used HAProxy as a solution for this, and found it very simple and straightforward. Is there a similar product for windows (server 2003 or 2008) which provides similar configuration options and runs as a lightweight service? For reasons outside my control I cannot setup a Linux machine (physical or virtual) and so I am looking for behaviour that can be deployed on a windows machine. I can only find Perlbal which appears to fall into this category. So as not to keep this open indifenitely I will give credit to the only answer.

    Read the article

  • GLSL billboard move center of rotation

    - by Jacob Kofoed
    I have successfully set up a billboard shader that works, it can take in a quad and rotate it so it always points toward the screen. I am using this vertex-shader: void main(){ vec4 tmpPos = (MVP * bufferMatrix * vec4(0.0, 0.0, 0.0, 1.0)) + (MV * vec4( vertexPosition.x * 1.0 * bufferMatrix[0][0], vertexPosition.y * 1.0 * bufferMatrix[1][1], vertexPosition.z * 1.0 * bufferMatrix[2][2], 0.0) ); UV = UVOffset + vertexUV * UVScale; gl_Position = tmpPos; BufferMatrix is the model-matrix, it is an attribute to support Instance-drawing. The problem is best explained through pictures: This is the start position of the camera: And this is the position, looking in from 45 degree to the right: Obviously, as each character is it's own quad, the shader rotates each one around their own center towards the camera. What I in fact want is for them to rotate around a shared center, how would I do this? What I have been trying to do this far is: mat4 translation = mat4(1.0); translation = glm::translate(translation, vec3(pos)*1.f * 2.f); translation = glm::scale(translation, vec3(scale, 1.f)); translation = glm::translate(translation, vec3(anchorPoint - pos) / vec3(scale, 1.f)); Where the translation is the bufferMatrix sent to the shader. What I am trying to do is offset the center, but this might not be possible with a single matrix..? I am interested in a solution that doesn't require CPU calculations each frame, but rather set it up once and then let the shader do the billboard rotation. I realize there's many different solutions, like merging all the quads together, but I would first like to know if the approach with offsetting the center is possible. If it all seems a bit confusing, it's because I'm a little confused myself.

    Read the article

  • Linux Bridge, Samba netbios name/hostname access

    - by Christopher Wilson
    I am currently running a linux bridge in the following configuration ADSL Modem: 192.168.1.1 Linux Bridge: eth0: 192.168.1.2 eth1: no address Wireless Router: 192.168.0.1 My issue is that i cannot access the "Linux Bridge" shares using the WINS name of the server via client systems (yes i understand it is a transparent bridge but i can access it via the 192.168.1.2 address this is not on the same subnet as the client systems). This is the global section of my SMB.CONF [global] unix extensions = off os level = 20 netbios name = server guest account = nobody server string = 447 Server security = share #unix extensions = no #wins support = yes #wins server = 192.168.0.1 name resolve order = wins lmhosts hosts bcast interfaces bridge1 eth0 eth1 lo bind interfaces only = yes Can i access a bridged server using it's WINS name to access samba shares? Cheers Chris

    Read the article

  • O'Reilly deals to April 5, 2012 14:00 PT on books on "where"

    - by TATWORTH
    At http://shop.oreilly.com/category/deals/where-conference.do, O'Reilly are offering a series of books on geo-location at 50% off until April 5, 2012 14:00 PT. HTML5 Geolocation Truly revolutionary: now you can write geolocation applications directly in the browser, rather than develop native apps for particular devices. This concise book demonstrates the W3C Geolocation API in action, with code and examples to help you build HTML5 apps using the "write once, deploy everywhere" model. Along the way, you get a crash course in geolocation, browser support, and ways to integrate the API with common geo tools like Google Maps. HTML5 Cookbook With scores of practical recipes you can use in your projects right away, this cookbook helps you gain hands-on experience with HTML5’s versatile collection of elements. You get clear solutions for handling issues with everything from markup semantics, web forms, and audio and video elements to related technologies such as geolocation and rich JavaScript APIs. Each informative recipe includes sample code and a detailed discussion on why and how the solution works. Perfect for intermediate to advanced web and mobile web developers, this handy book lets you choose the HTML5 features that work for you—and helps you experiment with the rest. HTML5 Applications HTML5 is not just a replacement for plugins. It also makes the Web a first-class development environment by giving JavaScript programmers a solid foundation for building industrial-strength applications. This practical guide takes you beyond simple site creation and shows you how to build self-contained HTML5 applications that can run on mobile devices and compete with desktop apps. You’ll learn powerful JavaScript tools for exploiting HTML5 elements, and discover new methods for working with data, such as offline storage and multi-threaded processing. Complete with code samples, this book is ideal for experienced JavaScript and mobile developers alike. There are also other books being offered at a discount at http://shop.oreilly.com/category/deals/where-conference.do

    Read the article

  • Unable to access any ubuntu shares from android/windows clients

    - by dan
    I am running Ubuntu 11.04, and cant seem to access any of my shares. Here is the output from testparm-s : Load smb config files from /etc/samba/smb.conf rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384) Processing section "[printers]" Processing section "[CanonMG2100AIO]" Processing section "[FreeAgent Drive]" Loaded services file OK. WARNING: You have some share names that are longer than 12 characters. These may not be accessible to some older clients. (Eg. Windows9x, WindowsMe, and smbclient prior to Samba 3.0.) Server role: ROLE_STANDALONE [global] server string = %h server (Samba, Ubuntu) encrypt passwords = No obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = Enter\snew\s\spassword:* %n\n Retype\snew\s\spassword:* %n\n password\supdated\ssuccessfully . username map = /etc/samba/smbusers unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 name resolve order = wins lmhosts host bcast dns proxy = No wins support = Yes usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d [printers] comment = All Printers path = /var/spool/samba create mask = 0700 guest ok = Yes printable = Yes browseable = No [CanonMG2100AIO] comment = Printer Drivers path = /var/lib/samba/printers read only = No guest ok = Yes [FreeAgent Drive] path = /media/FreeAgent Drive read only = No guest ok = Yes smbtree: Server requested plaintext password but 'client plaintext auth' is disabled anonymous failed session setup with NT_STATUS_INVALID_PARAMETER Server requested plaintext password but 'client plaintext auth' is disabled anonymous failed session setup with NT_STATUS_INVALID_PARAMETER and hostname: dekstop I know the spelling of desktop is incorrect. it was a duh moment. Any help would be greatly appreciated.

    Read the article

  • Motherboard max memory supported

    - by Ashfame
    I have an Intel DG965RY motherboard and its specification says it supports 8GB with 533 or 667Mhz RAM sticks and only 4GB with 800Mhz RAM sticks. I am running a 64bit OS. I earlier had 2 X 1GB sticks (800Mhz), so I bought 2 X 2GB sticks (800Mhz) and I underclocked them in the settings to run at 667Mhz. Shouldn't it support all 6GB RAM now? It would be a bummer if I will specifically need 667Mhz sticks thinking that at the worst they will underclock and then run at 667Mhz. I tried this because I saw someone posted at some forum that he put in 4GB+ of RAM in the same board @ 800Mhz and the system uses it all. In my case (On Ubuntu), it only shows 3.2GB as of now (link to Question) so needed to confirm if this is a hardware limitation.

    Read the article

  • Removed Java replaced with newest "Sun Java", disc won't boot, and won't let me re-install grub using boot repair disc

    - by Al Rowe
    Had a minor problem with my Stock market platform. Set-up screen would freeze program. Called their tech support, got their "Linux guy", who advised remove all Java and replace, not with synaptic version, but newest Sun Java. After removing, computer auto rebooted, and went to blue mem-test screen. Showed no errors, but couldn't get back in. Tried two versions of boot repair disc from iso (checked md5sum, showed good.), but fix aborted, giving apt-error detected. Opened a terminal and typed (or copy/paste): sudo chroot "/mnt/boot-sav/sda1" apt-get -f install. My system is Ubuntu 12.04. Had a few very minor issues from install, all fixed. Also added some of my favorite gnome tricks just to make life easier, but none that could have caused this. Added script to add shortcuts to desktop, open terminal in any menu from inside it, access root terminal, etc. System was firewalled and using avast antivirus (o.k., I'm paranoid. Used to do Windows sys-op and security.) But relative newbie to Linux.

    Read the article

  • Why CFOs Should Care About Big Data

    - by jmorourke
    The topic of “big data” clearly has reached a tipping point in 2012.  With plenty of coverage over the past few years in the IT press, we are now starting to see the topic of “big data” covered in mainstream business press, including a cover story in the October 2012 issue of the Harvard Business Review.  To help customers understand the challenges of managing “big data” as well as the opportunities that can be created by leveraging “big data”, Oracle has recently run and published the results of a customer survey, as well as white papers and articles on this topic.  Most recently, we commissioned a white paper titled “Mastering Big Data: CFO Strategies to Transform Insight into Opportunity”. The premise here is that “big data” is not just a topic that CIOs should pay attention to, but one that CFOs should understand and take advantage of as well.  Clearly, whoever masters the art and science of big data will be positioned for competitive advantage in their industries or markets.  That’s why smart CFOs are taking control of big data and business analytics projects, not just to uncover new ways to drive growth in a slowing global economy, but also to be a catalyst for change in the enterprise.  With an increasing number of CFOs now responsible for overseeing IT investments and providing strategic insight to the board, CFOs will be increasingly called upon to take a leadership role in assessing the value of “big data” initiatives, building on their traditional skills in reporting and helping managers analyze data to support decision making. Here’s a link to the white paper referenced above, which is posted on the Oracle C-Central/CFO web site, as well as some other resources that can help CFOs master the topic of “big data”: White Paper “Mastering Big Data:  CFO Strategies to Transform Insight into Opportunity CFO Market Watch article:  “Does Big Data Affect the CFO?” Oracle Survey Report:  “From Overload to Impact – An Industry Scorecard on Big Data Industry Challenges” Upcoming Big Data Webcast with Andrew McAfee Here’s a general link to Oracle C-Central/CFO in case you want to start there: www.oracle.com/c-central/cfo Feel free to contact me if you have any questions or need additional information:  [email protected]

    Read the article

  • Error running phusion passenger in standalone mode

    - by msidell
    I'm trying to run standalone phusion passenger so that I can run different ruby rvm configurations on the same host. I already have ruby and passenger running fine on this host. I am following the instructions here. When I run standalone passenger the first time, it appears to successfully install nginx. But then when it tries to run, I get this error: [root@clark directra]# passenger start -a 127.0.0.1 -p 3001 -d --user dweb *** ERROR *** Could not start Passenger Nginx core: nginx: [alert] could not open error log file: open() "/tmp/passenger-standalone.16757/logs/error.log" failed (2: No such file or directory) nginx: [alert] Unable to start the Phusion Passenger watchdog (/var/lib/passenger-standalone/3.0.11-x86-ruby1.9.3-linux-gcc4.1.2-1002/support/ agents/PassengerWatchdog): Permission denied (13) (13: Permission denied) Stopping web server... done FWIW, /tmp is writeable. Any idea what's wrong?

    Read the article

  • How to monitor the network traffic on a router?

    - by Adi
    Here's my current network set-up: we have 3 users connecting to a Thomson Gateway router (TG585 v8) provided by my ISP. We are connecting over an ADSL line. The problem is that we have a limited data allowance (60GB) and we always exceed it. I would like to monitor how much traffic each computer makes. The best solution would be to install a software on the router (like OpenWRT) which would monitor how much traffic each computer makes. But I couldn't find any replacement firmware that would support my router. The other solution would be to install a software on each machine and then collect all the data at the end of the mount. But that's not a very good think to do. Plus, the users can always shut down the application. Any suggestions?

    Read the article

  • ldap sync with outlook

    - by Dr Casper Black
    I have a task to research the possibilities of LDAP as a centralized Address Book. I have setup a openLDAP on debian 5.07. I managed to search the LDAP contacts from MS Outlook 2007 (with some drawbacks like Outlook cant recognize street and organization fields). My question is, is it possible ,& how, to sync data on LDAP server with applications that support LDAP? I could not find any data on this topic. EDIT: The point is, to have a centralized list of contacts that can be sync with various applications, for instance Outlook, Thunderbird, Phonebook on mobile phones...etc The Question is, Is it possible to transfer (update) data on a client application from LDAP database and viceversa? So not to search LDAP server data, but to download contact that are not available in the client application (Outlook) and upload data to LDAP if the contact is in (Outlook) and not in LDAP database and the other way around, in other words synchronize.

    Read the article

  • custom adm file for IE search providers on Windows 2003

    - by filipv
    Hi, I have been stumped by this issue for some time, I created a custom ADM template for a customer to populate the search providers in Internet Explorer 7 and 8. The custom ADM works fine and I have set 3 search providers, the problem is that I cannot change them (the customer wants to change the entry for wikipedia from EN to NL), I edited the ADM file but the clients seem to keep on using the old settings. Removing/replacing the adm file has no effect either, the settings remain. I used the following article as a base: http://support.microsoft.com/kb/918238 For IE8 you need to work with a name instead of a UID for the default entry, that works as expected. but there seems to be no way to change the setting once in place.

    Read the article

  • MVP.Years++ ; // Thanks Microsoft

    - by Sahil Malik
    SharePoint 2010 Training: more information Even though today is April fools day, it is my MVP renewal date. So, there is always the chance of thinking not being renewed as an April fools joke.  Well, I get to postpone that joke one more time. It looks like, I’ve been renewed again. WAHOOO!! :) Thank you Microsoft, and thank you to everyone one of you for your support and best wishes, and most of all, thanks to our MVP lead, Melissa – many don’t realize it, but it’s a tough job she has to do. Think about it, all the people who are MVPs, those who no longer will be, and those who want to be. 11 years ago when I got my first award, my love for technology was insane. Today, it is worse.I will remain a technologist until I die, even after I retire and grow crinkly. I would want my dentures fitted with Microprocessors.Technology is what I passionately love doing. I am one of the very few people who lives 24 hours of his day doing exactly what I’d rather be doing – thinking, dreaming, and working with technology. Read full article ....

    Read the article

  • Viewing the full Skype chat history

    - by hekevintran
    I have Skype 2.8 on Mac OS X 10.5.8. Under the the chat menu is an option called "Recent Chats". This allows me to see logs of recent chats, but not of older ones. I know the older ones are stored because they are in ~/Library/Application Support/Skype/username/chatmsg256.dbb. This file when put in a text editor has text chat information from all my previous Skype chats. It is however stored in an unknown file format that I do not know how to parse. Does Skype have a built-in log viewer (like Adium's) that I can use to access these older logs?

    Read the article

< Previous Page | 468 469 470 471 472 473 474 475 476 477 478 479  | Next Page >