Search Results

Search found 17148 results on 686 pages for 'screen coordinates'.

Page 473/686 | < Previous Page | 469 470 471 472 473 474 475 476 477 478 479 480  | Next Page >

• How to configure 1080p HDTV as a monitor

  - by Robot

  I've read several posts that almost answer my question, but not quite. I have a Samsung LN32C530 1080p HDTV I'd like to use as a monitor. I was reasonably successful getting the prior 720p model to work ok using SwitchResX, but I think I just got lucky with the parameters (1360x768@60Hz). I tried the expected (1920x1080@60Hz) values and "nearby" ones, with no luck. Older 720p params actually work, but I get the same small real estate as the older model TV. Trying values near 1080p always displays an image that doesn't match the screen size and is very jagged which makes me think interpolation is making things worse. Also, SwitchResX has a bunch of parameters other than H x W ("porch" etc), and I don't know how they all work together. Any help?

  Read the article

• Why do I get "General Failure" when pinging host name on a Win 7 node on the network?

  - by hydroparadise

  This is a very peculiar problem with a station on our network. The client pc is running Windows 7 Pro. What makes this problem interesting is that this client is the only node on the network that seems to be experiencing this proglem. When I try to ping a specific Win 08 server by host name, I get an IPv6 address and get General failure. But when I ping it's IPv4 address, it responds just fine. My first thought would check the DNS server the name resolutions to see what would be going on, but the problem begs the quesion, why does the station get an IPv6 address back and fails as opposed to using the IPv4 settings (which are static btw). What gives? I am including a screen shot of trying the one specific server and failing while trying another server with success. All other nodes on the network don't have problems communicating with the server the one station is having issues with.

  Read the article

• Suggestions for Troubleshooting WIndows 7 lockups

  - by Craig L

  I've got a Dell Latitude E6500 that was working fine under Vista x64. I got one of the new Seagate 500GB Hybrid SSD/HD 2.5 drives and thought.. hmm.. let's try Win 7 x64 on it. Bottom line: It works great for hours and then it will hard lock. I don't mean BSOD (or whatever the Win7 equivalent is). I mean my screen is displaying a static image (if there is a clock displayed, it will be frozen at the time the lockup occurred) and the mouse and keyboard do not work. Control-Alt-Delete will not work. I have to hold down the power button to reboot. The event log records NOTHING at the time the lockup occurs. Obviously something is happening to the system to cause the lockup, but the default Windows 7 x64 doesn't log it. How can I log the things Windows doesn't normally log in Event Viewer ?

  Read the article

• Convert video files for Maemo (Nokia N900) using ffmpeg/mencoder

  - by Vikrant Chaudhary

  I'm a newbie in video encoding so I'm looking for some expert advice. I'm looking to transcode media files with ffmpeg or mencoder (or something other) on Ubuntu for my Nokia N900 running Maemo. I'd prefer mencoder, because of ffmpeg's crazy dependencies. Video output should be AVC/H.264 (probably hardware accelerated on device). Audio output in AAC (should have preferred Vorbis but not supported natively and requires .mkv which is also not completely supported). Output video should retain the original aspect ratio. Resolution of screen is 800x480 (16:10). (Explanation of why-this-value-is-chosen would be really appreciated). Thanks.

  Read the article

• Installing win xp media center 2005

  - by wdizz

  I have a Dell 710 XPS H2C running Vista Business, I wish to clean install Win XP media center 2005. I wiped my hard drive with Wipe Drive Pro and proceeded to install Win XP, the install starts and goes thru the various prompts but when it comes to 'installing windows' I get a blue screen that flashes briefly (to fast to get the error code) and then reboots. This happens with any XP system disk (iv'e tried 4), but it installs Vista, 7 or Linux with no problems. I contacted Dell Support who have yet to give me any solutions to resolve the problem. Is there anyone out there with any ideas please.

  Read the article

• Hiding monitor from windows, working with it from my app only [closed]

  - by Mikhail

  I need to use a monitor as a "private" device for my special application, I want to use it as a flashlight of a sort and draw special patterns on it in full screen. I don't want this monitor to be recognized by OS (Windows 7) as a monitor. I.e. user should not be able to move mouse to that monitor, or change its resolution, or run screensaver on it or whatever. But I want to be able to interact with it from my application. Monitor is plugged using an HDMI cable to a video card (most probably nVidia). What is the simplest way to do this? All solutions are appreciated, including purchasing additional adapters or simple video cards, or any other special devices.

  Read the article

• SQL Server Installer Closes Silently Without Errors

  - by ashes999

  When I run the SQL Server 2008 R2 Express installer (32-bit or 64-bit), nothing happens. It will get to the screen where it asks me to accept the terms of license and send anonymous feedback; I check off both boxes and click Next, and it automatically starts installing the Support Files. And then the window disappears. I tried looking through the log files, but didn't see any errors. I've tried: x64 SQL Server R2 express x86 SQL Server R2 express X64 SQL Server R2 (full) X64 SQL Server Management Studio Of these, only management studio installed correctly; the two express editions failed silently, and the full version gave me different errors. I also tried running in Administrator mode (despite being logged in as an administrator user), but again, no difference.

  Read the article

• The Complete List of iPad Tips, Tricks, and Tutorials

  - by The Geek

  The Apple iPad is an amazing tablet, and to help you get the most out of it, we’ve put together a comprehensive list of every tip, trick, and tutorial for you. Read on for more. Note: This article was originally published earlier this year, but we’ve updated it with a real lot more content since then, so we’re republishing it for you. We’ll be keeping this page updated as we find more great articles, so you should bookmark this page for future reference Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor The Brothers Mario – Epic Gangland Style Mario Brothers Movie Trailer [Video] Score Awesome Games on the Cheap with the Humble Indie Bundle Add a Colorful Christmas Theme to Your Windows 7 Desktop This Windows Hack Changes the Blue Screen of Death to Red Edit Images Quickly in Firefox with Pixlr Grabber Zoho Writer, Sheet, and Show Now Available in Chrome Web Store

  Read the article

• Hybrid Graphics Functional won't work with my Asus UL30V anymore

  - by futuress

  The problem is that I am no longer able to boot in compatibility mode for just turning on my Nvidia graphics to install the driver. Because no login screen will appear if Ubuntu is loading. In Ubuntu 11.10 I was able to activate nvidia graphics only' option this way: 1) Change BIOS to 'compatibility mode' which will turn off the Intel card. 2) Install the Nvidia proprietary driver using Ubuntu's driver finder (Additional Drivers) and then reboot. I was not interested using only the Intel graphics, for the sake of battery life. Now I have both cards running and they drain my battery life dramatically. And the main problem of this configuration no OpenGL is available, so I can't play any games any more. At this point, I have a pre-solution. I uninstalled the nvidia drivers and installed bumblebee. Now the Intel card is recognized. I would prefer to run just the nvidia card as in Ubuntu 11.10 but for now this is better than nothing. Does anybody else have the same problem?

  Read the article

• Kubuntu Monitor Out of Range

  - by uncleo

  My X server seems to be faulty, but I don't know why. I had some problems last week with a new motherboard, but they seemed to be resolved. Today, I updated Kubuntu and restarted, but my Viewsonic VX900 LCD monitor shows the splash screen for several seconds, then displays the message "Out of Range" I have tried various kernels in Grub, some in recovery mode, most do the same thing. No key combinations bring up a shell prompt like I expect. The one exception was a very old kernel, that would only mount the file system as read-only, so I can't fix up the xorg.conf file. Is there anything to be done?

  Read the article

• Should I Return My iPhone?

  - by Daniel

  got an iPhone 3G S about 20 days ago. That means I can return it no problem for the next 10 days. Should I return it, wait about 6 weeks, and get the iPhone 4.0 instead? I also put about $25 towards accessories but I could probably sell them for $15. Is it worth it not having it for those 6 weeks? Or should I just go with the free update, keep my screen protectors and case, and "survive" without the phone. What new features will come with the phone? My understanding is that most of the features will be part of the upgrade. My other option will probably be to give it back and then when they make the official announcement, buy the 3G S for maybe $99 if they drop the price that much.

  Read the article

• Possible to install Xmonad on Ubuntu separate from Gnome?

  - by Kurtosis

  I just downloaded Xmonad from the repository on my Ubuntu 10.04 box, but when I log out and try to log back in using Xmonad instead Gnome, it doesn't work. I just get the login screen background image and a mousepointer, and nothing else. Right-clicking does nothing, no menus or anything. Key combo's like Ctrl-X, Ctrl-Z, and Ctrl-Alt-Delete do nothing either. Left the computer in this state for 30 minutes while I went to the grocery store, but it was still hung when I returned and I had to hard-reboot it. A Google search returned a few sites showing how to configure Xmonad to work with Gnome, but I'm afraid to try this since I don't want to risk borking my Gnome installation, at least not until I've had a chance to learn Xmonad a bit. Is it possible to run Xmonad independently of Gnome? If so, anyone have any idea what might be wrong and how to fix it?

  Read the article

• small light laptop with docking station that has a PCI(e) slot

  - by laramichaels

  Hi everyone, I am looking for a new laptop/netbook and I have two simple requirements: must be small (10-12in screen) and light (<=3-3.5pounds); must work with a dock into which I can put a PCI or PCI Express card. Basically, I have no performance requirements. Discontinued or low-end are fine. All I want is something easy to carry that when at work I can use a PCI/PCI Express card with to do multi-head. Eg, if an Acer Aspire 1410 fitted the second requirement I would by one in a blink. The only solution with which I am acquainted are Thinkpads that can go into the Thinkpad Advanced Dock. Do other laptop (or netbook brands) also offer the possibility of using Although this is not a "requirement" per se, I would rather hear about options that would not involve buying the latest-greatest-+$2k model... : ) Thank you for any advice! ~lara

  Read the article

• Low graphic mode after switching to fglrx drivers

  - by MrKenkadze27

  I have another problem on my laptop after trying to fix another issue. So, because of this issue, I wanted to switch to fglrx to fix it and after restart, I got this screen: I went back to terminal and I got rid of this problem by "purge"-ing the fglrx driver and removing it, going back to problem number one. I tried lot of methods to fix this such as this ones but they ether switched back to open-source drivers or didn't helped at all. So would anyone like to help? maybe give some commends to try? My Laptop has 2 GPU, AMD Radeon HD 7650M and Intel(R) HD Graphics 4000. AMD is running always making my laptop too hot. Here's one of the Xorg.5.log file paste, I am sure it will be useful finding my problem. Thanks! Please make answer easy to understand as I am not an expert, this problem is keeping me from being one. Also the AMD driver which can be downloaded from their site doesn't install, it says non compatible graphics card but Ubuntu Software Updater sure installs it.

  Read the article

• Fn key sticks down

  - by Oli

  Just bought my significant other a shiny new Samsung Q330 13" netbook, stuck an OCZ Agility in it and installed Maverick. Just as a quick aside, this is a devastating combination. Graphics work perfectly and it cold-boots to desktop in about 7 seconds. Very quick. But (common to laptops) I've got a couple of problems. I'll start with the most problematic and start a new thread for the other. Like a lot of laptops, there is a Fn (function) modifier to allow some keys to have another purpose. When I tried to alter the brightness of the screen by tapping Fn+Down, it worked but kept on going until it was as dim as it could go. I tapped Fn+Up and it went to the other extreme. After that the entire keyboard ceases to work properly because the Fn modifier appears to be locked. Additionally, and as a direct side effect, I think, clicking on things doesn't result in a standard result. It's as if control is being held. A reboot is the only thing that seems to fix these problems. This isn't a problem if you don't touch the Fn key but as there are two of them on the keyboard, an accident is going to happen sooner than later, requiring a reboot (and probably some data loss). I don't have a lot of experience with laptops (I prefer my hulking great desktop) so this isn't my area of expertise. I'm open to all suggestions, even disabling the two Fn keys until we can find a better solution.

  Read the article

• JustCode &ndash; Color Identifier Basics

  Color identifiers make it easier for developers to quickly read and understand the code on screen.  One of the many features provided by JustCode is the ability to colorize additional items that Visual Studio does not allow you to colorize by default.  The colorization of items such as methods, properties, events, variables, and method parameters can easily be tweaked to your specific needs. Enable / Disable Color Identifiers In the recent release, we turned this option on by default.  You can enable/disable code colorization by going to the JustCode menu in Visual Studio, selecting options, then selecting the general section in the left window.  When you scroll down on general setting you will see a check box that says Color Identifiers.  Check or uncheck this box to enable/disable code colorization.    Color identifiers option   Adjust Color Identifiers Adjusting the color identifiers in JustCode is done in the same place ...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Using Terminal Services 'query' in batch file

  - by dboarman-FissureStudios

  I have a batch file that checks several of our servers for a user. From the command: query user %userID% /server:ServerName I want to capture the output before it goes to the screen. Is there a way to redirect the output to a variable? The basic gist of what I want to accomplish is this - we iterate through our servers: query user %userID% /server:Server1 query user %userID% /server:Server2 query user %userID% /server:Server3 query user %userID% /server:Server4 Instead of outputting a message that the user could not be found on a specific server, I would like for it to only notify me if it finds the user on a server.

  Read the article

• Use Windows Briefcase from the command line

  - by Daniel

  I have a thumb drive on which I take many of my files with me. I would like to synchronize it with my computer automatically when I connect it. I currently have a script run every time I connect it so that I can do the many things that need to be done when it connects (check for updates to the portable applications, etc.). I want my synchronization utility to: Detect conflicts work correctly when I move files or change the folder structure tell the difference between a file that was deleted on one side and a file that was added on the other work from the command line or at least have a command that will open up a window provide a confirmation screen before doing anything The Windows Briefcase does all of these except the command line. Is there any program that does all of these, or is there a way to synchronize the briefcase from the command line?

  Read the article

• Game programming basics under Windows

  - by dreta

  I've been trying to learn some Windows programming using the Win32 API. Now, i'm used to working with the OS layer being abstracted away, mostly thanks to libraries like SFML or Allegro. Could you guys help me out and tell me if i'm thinking right here. The place for my gameloop is where i'm reading the messages? while (TRUE) { if (PeekMessage (&msg, NULL, 0, 0, PM_REMOVE)) { if (msg.message == WM_QUIT) break ; TranslateMessage (&msg) ; DispatchMessage (&msg) ; } else { //my game loop goes here } } Now the slightly bigger issue, that is, drawing. Do i run my drawing where i normaly do it, inside the game loop after the game logic? Or do i do it when WM_PAIN is being called and just call InvalidateRect (hwnd, NULL, TRUE); when i want to draw? This does feel weird, the WM_PAINT is a queued message, so i don't know for sure when it'll be called. So if i wanted to avoid this, do i just get the device handle inside the game loop and only ValidateRect (hwnd, NULL); in the WM_PAINT case (beside the ValidateRect (hwnd, NULL); called after drawing in the game loop)? Actually, now that i think about it, do i even need WM_PAINT in this situation or can i skip it and let DefWindowProc handle it (does it validate the screen if WM_PAINT isn't processed)? If this is any important, i'm setting up my code for OpenGL.

  Read the article

• Laptop abruptly powers off after few seconds of booting

  - by Alan Mendelevich

  I have a 3 year old HP Pavilion dv2208 laptop. Recently it started abruptly powering off in like ~20-30 seconds into Windows boot sequence after almost every reboot/shutdown. Even if I leave it in Repair/Start Windows Normally stage it powers off anyway. The only way I managed to workaround this is to enter BIOS setup screen and leave it on for no less than 10 minutes. I don't know what happens there but this helps every time. Any ideas of possible ways to fix this that don't include replacing motherboard are highly appreciated. P.S.: I've tried resetting BIOS to defaults, updating to the latest BIOS version, etc. Happens with both Vista and Windows 7.

  Read the article

• NHibernate Tools: Visual NHibernate

  - by Ricardo Peres

  You probably know that I’m a big fan of Slyce Software’s Visual NHibernate. To me, it is the best tool for generating your entities and mappings from an existing database (it also allows you to go the other way, but I honestly have never used it that way). What I like most about it: Great support: folks at Slyce always listen to your suggestions, give you feedback in a timely manner, and I was even lucky enough to have some of my suggestions implemented! The templating engine, which is very powerful, and more user-friendly than, for example, MyGeneration’s; one of the included templates is Sharp Architecture; Advanced model validations: it even warns you about having lazy properties declared in non-lazy entities; Integration with NHibernate Validator and generation of validation rules automatically based on the database, or on user-defined model settings; The designer: they opted for not displaying all entities in a single screen, which I think was a good decision; has support for all inheritance strategies (table per class hierarchy, table per class, table per concrete class); Generation of FluentNHibernate mappings as well as hbm.xml. I could name others, but… why don’t you see for yourself? There is a demo version available for downloading. By the way, I am in no way related to Slyce, I just happen to like their software!

  Read the article

• Visual Studio 2010 Pro Power Tools Screencast

  - by Steve Michelotti

  Microsoft just released the Visual Studio 2010 Pro Power Tools extension and it is awesome. A summary of all the features can be found here and it is available in the Visual Studio Gallery here. There are a bunch of great features but, in my opinion, the best one is the replacement for the Add Reference dialog. This gives sub-string search capabilities as well as the ability to add multiple references without having to continually re-open the dialog. For this feature alone, you should install the Pro Power Tools right now. There are a few blogs posts that do a good job describing all the features but what I wanted to do here was to post a quick screencast (7 minutes) that shows the features that I think are really cool. I show most (but not all) of the features focusing on the ones I think are the best. The features I cover are: Installation with the Extension Manager Add Reference Dialog replacement Tab Well including pinned tabs, pinned tabs in second row, fixed close button, colorized tabs, dirty indicator Highlight current line Triple Click for full-line selection Ctrl + Click for Go To Definition Colorized Parameter Help Enjoy! (Right-click and Zoom to view in full screen)

  Read the article

• Browser privacy improvement implications for websites

  - by phq

  On https://panopticlick.eff.org/ EFF let you test the number of uniquely identifying bits that the browser gives a website. Among these are HTTP header fields such as User-Agent, Accept, Accept-Language and later perhaps ETAG and If-Modified-Since. Also there is a lot of Information that javascript can get from the browser such as time-zone, screen resolution, complete list of fonts and plugins available. My first impression is, is all this information really usable/used on a majority of all websites? For example, how many sites does really send different content-types depending on the http accept header, or what fonts are available(I thought css had taken care of this)? Let's say of these headers/js functionality on day would be gone. Which ones would; never be noticed they were gone? impact user experience? impact server performance? immediately reimplemented because the Internet cannot work without it? Extra credit for differentiating between what can be done, what should be done and what is done in most situations.

  Read the article

• How can I restore VM on a new Hyper-V server?

  - by jaloplo

  Hi all, I was working gladly with my VM on my local Hyper-V server. But, after installing some updates on the host the system only show the famous blue screen. I couldn't start my host so I reinstalled it and configured as new Hyper-V server. My VM was in a another disk to prevent this happening but I don't know how to add it as a new VM on new server. In addition, this VM has various snapshots so, how can I add this VM to my new Hyper-V server? UPDATE: I can't do Export/Import because my server crashed before I can't do it.

  Read the article

• How do I get back hard drive space after I have uninstalled Ubuntu from Windows?

  - by Shantanu

  I installed Ubuntu on windows like it says to do it on Ubuntu's website as an application. I did not want it to create a separate partition on my hard drive. A few days ago, I uninstalled Ubuntu by going into the Windows control panel and hitting uninstall. As you would expect, I would get back my 100 or so gb on the disc. i never really installed anything of importance on ubuntu so i never had a second thought about uninstalling it. But I never got back my 100gb from Ubuntu. Now when I add up all of the folders on my c drive, they total to the amount I had on windows before I uninstalled Ubuntu but when I look at the My Computer screen, it says that another 100 or so gb is missing. I tried defragmenting the disc, downloading various disc managers but nothing fixed the space problem. Can anyone please help me with this!!??? Any help is much appreciated! Just making sure: UBUNTU WAS NOT ON A SEPARATE PARTITION, IT WAS INSTALLED AS AN APPLICATION ON WINDOWS. It tells yuo how to do this here except i did it with a much older version (i think it was 8.04 or soemthing): http://www.ubuntu.com/download/help/install-ubuntu-with-windows

  Read the article

< Previous Page | 469 470 471 472 473 474 475 476 477 478 479 480  | Next Page >