Search Results

Search found 16230 results on 650 pages for 'three js'.

Page 473/650 | < Previous Page | 469 470 471 472 473 474 475 476 477 478 479 480  | Next Page >

• What's the risk of running a Domain Controller so that it is accessible from the internet?

  - by Adrian Grigore

  I have three remote dedicated web servers at different webhosts. Adding them to a common domain would make a lot of administration tasks much easier. Since two of the servers are running Windows 2008 R2 Standard, I thought about promoting them to Domain Controllers in order to set up the windows domain. There's another thread at Serverfault that recommends this. At the same time I've read a lot of times on different websites that this is not a good idea because an domain controller should always be behind a firewall LAN. But I can't set up something like this because I don't have a LAN with a static IP accessible from the internet. In fact I don't even have a windows server in my LAN. What I have not found out is why exposing a DC to the Internet would be bad idea. The only risk I can see is that if someone penetrates one of my webservers, it should be much easier to penetrate the others as well. But as far as I can see that's the worst case scenario since I am only going my web servers to that domain, not any computers from my local network. Is this the only downside or does it also make it easier to penetrate one of my web servers in the first place? Thanks, Adrian

  Read the article

• Bringing people into an Asterisk conference call

  - by Harley

  I'm using Asterisk 1.4 and am trying to work out a way to bring people into a conference call. In the ideal scenario two people would be talking and one of them would push some keys, then a phone number and then the three of them would be in a conference. From there they should be able to bring in other people as well. This seems to be what the Asterisk n-way call HOWTO is trying to do, but it doesn't work quite properly for me. Here's what happens: 1. Internal person A calls person B 2. Person A presses *0, he is given a dial tone and person B is taken to a conference room 3. Person A calls person C and they can talk, and then person A presses **. 4. Person C is brought to the conference room, but person A is disconnected. In the last step, A should be taken to the conference room as well. Here's the relevant logs, where 230 is person A, 231 is person B, 207 is person C, and 282 is the conference room.

  Read the article

• big speed difference on a network link with and without VPN tunnel

  - by xirtyllo

  Scenario: We have a network link between two offices. The link is provided by a third party company through a VLAN on their network, but to us it is totally transparent -as if we had a simple ethernet cable going from one location to the other-. We have one router at each side of the link, with 3 VPN tunnels in between the two. The test: When I test the speed of the network link with the routers in place, with one laptop directly connected to the router on each side, I consistently get ~30/35Mbps. But if I take out the routers and I test the link connecting the laptops directly to the ethernet cable at each side, I consistently get ~85/88Mbps. It's quite a big performance hit, and I would tend to think that the VPN tunnels are responsible for the slow down. Is it normal that this configuration (two routers with three VPN tunnels between them) takes away so much bandwidth? More info: The encryption algorithm used for the VPN tunnels is AES128. The routers model is Zyxel USG200 and Zyxel USG1000, and their CPU, memory, and storage use is well within normal limits. The nominal bandwidth of the network link is 100Mbps. The network link in question is supplied by a third party company (the building in between our two offices). Basically it passes through their network as a VLAN, but the VLAN is completely transparent to us (e.g. no configuration required on our side, just like one single cable from end to end). Unfortunately (or maybe fortunately) I cannot directly test different routers configurations as I'm not the person in charge of it.

  Read the article

• RPCSS kerberos issues on imaged Windows workstations

  - by sysadmin1138

  While doing some unrelated troubleshooting I came across a set of Event Log entries that have me concerned. Machine Name: labcomputer82 Source: Security-Kerberos Event ID: 4 Event Description: The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server labcomputer143$. The target name used was RPCSS/imagemaster4.ad.domain.edu. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password. If the server name is not fully qualified, and the target domain (AD.DOMAIN.EDU) is different from the client domain (AD.DOMAIN.EDU), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server. There are three machine names used in this message. It's generated on labcomputer82, it's attempting to talk to another lab workstation called labcomputer143, and the service in question (RPCSS) refers to the name of the machine that this machine was imaged from (and possibly also that of labcomputer143, I'm not sure). The thing that has me raising both eyebrows is that the machine named labcomputer82 is attempting to use an SPN of RPCSS/imagemaster4.ad.domain.edu. The SPN attribute on the computer object in AD looks just fine. It has all the names it should have. Of the over 3,000 computer objects in our AD domain, somewhere around 1,700 of the are computer-lab seats that are frequently imaged. If we're doing something wrong, I'd like to know in time to get our procedures modified (and people retrained) for fall quarter. But if this is normal for imaged machines, I'll just continue ignoring these.

  Read the article

• Making OpenSSL work on PHP Windows 2008 server with FastCGI

  - by KacieHouser

  I have been researching all day. Here is what I have done: In C:/PHP/php.ini and C:/PHP/php-cgi-fcgi.ini I have made the extension_dir = "C:/PHP/ext" I uncommented extension=php_openssl.dll I went to http://windows.php.net/download/ and got the thread safe version with the PHP 5.4 (5.4.8) version of DLL's In C:/PHP/ext I replaced the php_openssl.dll with the one I downloaded In System32 and SysWOW64 I added the following DLL's ssleay.dll libeay.dll I restarted the IIS server in the Server Manager under Web Server and stopped and started the World Wide Web Publishing Service That didn't work, so I tried same thing with the unthreaded versions. I still get: Fatal error: Call to undefined function ftp_ssl_connect() in C:\inetpub\wwwroot\REMOVED_dev\save_data.php on line 5 Here are related things from phpinfo(): System Windows NT DEV-WEB1 6.1 build 7601 (Windows Server 2008 R2 Standard Edition Service Pack 1) i586 Compiler MSVC9 (Visual C++ 2008) Architecture x86 Configure Command cscript /nologo configure.js "--enable-snapshot-build" "--enable-debug-pack" "--disable-zts" "--disable-isapi" "--disable-nsapi" "--without-mssql" "--without-pdo-mssql" "--without-pi3web" "--with-pdo-oci=C:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8=C:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8-11g=C:\php-sdk\oracle\instantclient11\sdk,shared" "--with-enchant=shared" "--enable-object-out-dir=../obj/" "--enable-com-dotnet" "--with-mcrypt=static" "--disable-static-analyze" "--with-pgo" Server API CGI/FastCGI Configuration File (php.ini) Path C:\Windows Loaded Configuration File C:\PHP\php-cgi-fcgi.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) Registered PHP Streams php, file, glob, data, http, ftp, zip, compress.zlib, compress.bzip2, https, ftps, sqlsrv, phar Registered Stream Socket Transports tcp, udp, ssl, sslv3, sslv2, tls FTP support enabled Protocols dict, file, ftp, ftps, gopher, http, https, imap, imaps, ldap, pop3, pop3s, rtsp, scp, sftp, smtp, smtps, telnet, tftp openssl OpenSSL support enabled OpenSSL Library Version OpenSSL 0.9.8t 18 Jan 2012 OpenSSL Header Version OpenSSL 0.9.8x 10 May 2012 What am I missing here?

  Read the article

• data is not posted in $_POST variable using AJAX [migrated]

  - by Oliver

  Im having a problem in one of my script. Server is running in php, and im using AJAX to post data. Here is my script. PHP script: 0){ echo "Search Result :"; for ($x=0;$xProject Name:   ".mysql_result($result,$x,"projname").""; echo "APMS ID:   ".mysql_result($result,$x,"apmsid").""; echo "Prefix/es:   ".mysql_result($result,$x,"projprefix").""; echo "Usage Type:   ".mysql_result($result,$x,"usagetype").""; echo "Rate:   ".mysql_result($result,$x,"projrate").""; echo "Offer Details:   ".mysql_result($result,$x,"offerdetails").""; } }else{ echo "No results found ..."; } }else{ echo "Problems encountered while processing the data ..."; } ? JS Script: function QueryPrefix() { var xmlhttp; var pStr = document.getElementById('Editbox2'); var htmlHolder = document.getElementById('Html1'); var butStr = document.getElementById('Button1'); if (pStr.value.length == 0){ alert("Please enter a value on the box provided!"); return; } pStr.value=""; if (window.XMLHttpRequest) {// code for IE7+, Firefox, Chrome, Opera, Safari xmlhttp=new XMLHttpRequest(); } else {// code for IE6, IE5 xmlhttp=new ActiveXObject("Microsoft.XMLHTTP"); } xmlhttp.onreadystatechange=function() { if (xmlhttp.readyState==4) { htmlHolder.innerHTML=xmlhttp.responseText; butStr.disabled=false; } } butStr.disabled=true; xmlhttp.open("POST","searchutype.php",false); xmlhttp.setRequestHeader("Content-type","application/x-www-form-urlencoded"); xmlhttp.send("pStr=" + pStr.value); }

  Read the article

• Outlook 2007 / 2010 Calendar: hide meetings in specific category

  - by Jeroen

  Question Is there any easy way in Outlook 2007/2010 to show/hide meetings in a specific category? Preferably only for a specific view (the Month view, in this case). Note: I was almost done writing this question, adding just one more "What I've tried" option, when I found an acceptable (though imperfect) solution. Remembering this SE blog post I figured I might as well post it after all and answer it myself. And who knows, perhaps someone else has a more elegant solution. The reason for me personally is that I'd like to hide the "small, recurring meetings" like our daily stand-up meeting in the month view. I'd prefer an Outlook feature that is meant for this (there must be one for this, right?), but I'm open to workarounds or plugin suggestions as well. What I expected to find somewhere was a list of categories (with added option "No category") where you could select/deselect from which categories you'd see meetings. Something like this mock-up: What I've tried Edit "View Settings", and use a "Filter..." on categories. This has several disadvantages, the major one is that the filter only allows me to choose what I want to show, but not what I want to hide. Even if I tick all categories but one for the filter it would still hide any uncategorized meeting. Similar to 1, but then using Advanced filters. Still a bit clumsy as changing views can be up to three clicks, but this is the best solution so far (see the corresponding answer below). Creating a sub-calendar for these "small" meetings that I wish to hide. This felt a bit clumsy and like overkill, but did provide an easy "select/deselect" option to show/hide these meetings. Search for plug-ins that do this. Couldn't find one (yet).

  Read the article

• Cisco SG200 vlan issue in ESXi VSA cluster

  - by George

  I have three Cisco SG200-26 switches, and I also have two ESXi hosts that I have connected like shown in the below "best practice" map by VMware: http://communities.vmware.com/servlet/JiveServlet/previewBody/17393-102-1-22458/VSA_networking_map.pdf Even though I created the VLANs in the SG200 and I set the two VLANs (508 and 608) as allowed for these untagged ports (where my ESX NIC's are connected), I can not ping from host 1 to host 2 when configuring the NIC's to use 608 VLAN. Am I missing something? my IP's are all in the 192.168. range, and the only reason I need the VLANs is to isolate the traffic of VSA back-end internally, only the two hosts will be using the VLANs. So I think I do not have to create virtual interfaces on my router since that's the case, is my understanding correct? Also sending my switch config screenshot below.. all 3 switches have the latest firmware (it seems these were originally linksys and got rebranded as cisco after the acquisition) http://img31.imageshack.us/img31/2503/switch.gif Any ideas what to change on the Cisco SG200 to make this work , would be appreciated! The second VLAN (608) only needs two IP's: 192.168.0.1 and 192.168.0.2 The first VLAN (508) will have about 15 IP's for ESXi Management and VSA cluster service, I could use either 192.168.1.xx or 10.0.1.xx The rest of my network (about 50 clients) is in 192.168.1.xx range VMware also states that the VLAN protocol on the physical switch must be 802.1Q, not ISL, anyone knows which of the two my SG200-26 uses? In addition to that, the only requirement from VSA is that my two hosts: -Are in the same subnet. -Have static IP addresses set. -Have the same Default Gateway configured. If I need inter-vlan routing for this, I suppose I have to create virtual interfaces on my sonicwall, and assign an IP for each VLAN, and then set routes between them? Thank you for your time!

  Read the article

• Still about SSD potentials...write and read speed

  - by Macroideal

  I have been working on SSD (solid state disk) for several months..Problems and Questions hit my head unexpectedly..Coz i am a virgin in ssd... Especially these days I was testing the write-read speed of ssd, which I was always caring.... however result turned out not good as I expected, or even worse Three kinds of read-write were implemented in my test read and write directly from and into ssd, with openning ssd as a whole device. in windows: _open("\\:g", ***).. It can be very tricky and hairy that you'd write a data with size of folds of 512, at the disk position of folds of 512bytes... So, If you wanto write just a byte or 4 bytes, you'v to write at least a whole sector one time. Read and write data from and into files located in SSD... Read and Write data from and into files in mechanical Disk I compared the pratices below...I found ssd sucks...the ssd performs worse than mechanical disk... so i am wondering where i can get the potential performance of ssd, since ssd is said to a substitute for mechanical disk in the future.. Nevertheless, I test ssd with a pro-hard-disk tools..ssd is like twice speedier than mechanical disk. So, why?

  Read the article

• Network cabling with multiple patch panels?

  - by dannymcc

  I am in the very early stages of planning a network cabling upgrade in our office, mainly to upgrade the old cables from Cat5 to either 5e or 6. I am also planning on upgrading all of our 10/100 switches to 10/100/1000 switches. I would like to have three small wall mounted cabinets spread around the building, each with a patch panel and switch. These would all lead back to our server room. The question is; should I have two patch panels in each wall cabinet, one with 24 or 48 ports that are connected to a matching patch panel in the server room. The second patch panel would then link to each device in that cabinets area. Then I wouldn't put a switch in the small cabinets. All switching would be done in the server room. Or, should I have one main cable from the server room to each of the cabinets - plugged straight into the switch and the patch panel is for devices in the cabinets area? I hope that makes sense!

  Read the article

• Hyper-V virtual machine can't be migrated to a specific host in the cluster

  - by Massimo

  I have a three-node Hyper-V cluster running on Windows Server 2008 R2 which is working quite flawlessly: there are no errors, live migration works, all hosts can and will happily run all virtual machines, and so on. But one specific virtual machinee is trying to make me go mad: it works on two nodes of the cluster, but not on the third one. Whenever I try to move the VM to that node, be it in a live migration or with the VM powered off, it always fails. In the event log of the host these events are logged: Source: Hyper-V-VMMS Event ID: 16300 Cannot load a virtual machine configuration: General access denied error (0x80070005) (Virtual machine ID <GUID>) Source: Hyper-V-VMMS Evend ID: 20100 The Virtual Machine Management Service failed to register the configuration for the virtual machine '<GUID>' at 'C:\ClusterStorage\<PATH>\<VM>': General access denied error (0x80070005) Source: Hyper-V-High-Availability Event ID: 21102 'Virtual Machine Configuration <VM>' failed to register the virtual machine with the virtual machine management service. All other VMs can be moved to/from the offending host, and the offending VM can be moved between the other two hosts. Also, this is not a storage problem, because there are other VMs in the same cluster volume, and the host has no troubles running them. What's going on here?

  Read the article

• Can't install NPM after installing Node on EC2 Linux instance?

  - by frequent

  I'm trying my first attempt on getting a node server set up on an amazon ec2 linux instance. I think I made it quite far. First problem I ran into was when trying to make Node the connection timed out after a while, so I need three attempts until I got this: LINK(target) /home/ec2-user/node/out/Release/node: Finished touch /home/ec2-user/node/out/Release/obj.target/node_dtrace_header.stamp touch /home/ec2-user/node/out/Release/obj.target/node_dtrace_provider.stamp touch /home/ec2-user/node/out/Release/obj.target/node_dtrace_ustack.stamp touch /home/ec2-user/node/out/Release/obj.target/node_etw.stamp make[1]: Leaving directory `/home/ec2-user/node/out' ln -fs out/Release/node node Which tells me, "Node is done", although I'm not sure it is also working as it should. Following this,this and this tutorial, I'm now stuck at installing npm. I think I first cloned into the wrong folder, which always gave me error 127, but even if I'm doing this: cd ~ git clone git://github.com/isaacs/npm.git cd npm sudo -s PATH=/usr/local/bin:$PATH make install I'm still getting this: #after cloning# make[1]: Entering directory `/root/npm' node cli.js install bash: node: command not found make[1]: *** [node_modules/.bin/ronn] Error 127 make[1]: Leaving directory `/root/npm' make: *** [man/man3/start.3] Error 2 Question:: Since I'm pretty much a newby at everything I'm trying here, can someone please tell me what I'm doing wrong and how to get npm to install? Also, in case I cloned into the wrong folder, is there a way to remove the "false clone" or is this not written to disk until I call make install and I don't need to worry? Thanks for helping out!

  Read the article

• NFS v4, HA Migration, and stale handles on clients

  - by Karl Katzke

  I'm managing a server running NFS v4 with Pacemaker/OpenAIS. NFS is configured to use TCP. When I migrate the NFS server to another node in the Pacemaker cluster, even though the metadata is persisted, connections from the clients 'hang' and eventually time out after 90 seconds. After that 90 seconds, the old mountpoint becomes 'stale' and the mounted files can no longer be accessed. The 90 second grace period seems to be part of the server configuration and not the client configuration. I see this message on the server: kernel: NFSD: starting 90-second grace period If I restart the NFS client on the client nodes after I migrate (unmounting and then remounting the share), then I don't experience the problem, but connections and file transfers still interrupted. Three questions: What is the 90 second grace period? What's it there for? How can I keep the files from going stale on the clients without restarting them after I migrate the NFS server to another node? Is it actually possible to migrate the NFS server without having large file uploads drop?

  Read the article

• Computer speakers receive radio station signal

  - by squircle

  I have a set of Logitech 5.1 speakers where each speaker and the source plug into the subwoofer. I'm using a Griffin Firewave with output from my MacBook Pro, and output from my custom-built desktop with a switch in the middle (built it myself out of an old Belkin A/B parallel switch). Recently, I've noticed that I can hear a local Punjabi radio station being picked up by my speakers, and the volume of this interference increases as I increase the volume of the speakers. I'm fairly sure that this radio station is at the low-end of the FM spectrum, below 90MHz (or it may be at the high end, above 105MHz, my memory isn't infallible). It gets quite annoying as I can't put my audio very loud without the interference. I've tried to put a ferrite core on the input cable just before the 3.5mm jacks plug into the subwoofer. I don't know if putting the same core around all three of the cables (green, black, orange) would negate the effects, but I'm assuming not. There has been no change. Is there any reason why this would be happening? I'm assuming the interference is coming somewhere between the FireWave and the subwoofer, because the noise gets amplified with volume increases. If anybody has any suggestions, I'd be grateful!

  Read the article

• Solaris 10 zlogin logs in, logs out immediately

  - by Spelevink

  On a SPARC v445 running Solaris 10 9/10, had to rebuild rpool and reattached the three existing mirrored zpools on the other existing disks, with their zfs filesystems and NG zones intact. The zones have been configured with zonecfg -z ZONENAME create etc. ... and are now online using zoneadm -z ZONENAME attach -U then simply booting after being in installed state, but I cannot zlogin to any of the zones except one. It shows that I am logged in, then a blank line, then immediately logged out again. When I try to login using zlogin -C ZONENAME I cannot; the error message is: May 15 15:43:46 <hostname> login: open_module: stat(/usr/lib/security/pam_mkhomedir.so.1) failed: no such file or directory. May 15 15:43:46 <hostname> login: load_modules: cannot open module /usr/lib/security/pam_mkhomedir.so.1 But /usr/lib/pam_mkhomedir.so.1 does not exist, and it does not exist on my other servers, but those zones are accessible using zlogin. I can only zlogin to the zones with zlogin -S ZONENAME. What to do next? Thank you.

  Read the article

• IIS 7.0 404 Custom Error Page and web.config

  - by Colin

  I am having trouble with a custom 404 error page. I have a domain running a .NET proj with it's own error handling. I have a web.config running for the domain which contains: <customErrors mode="RemoteOnly"> <error statusCode="500" redirect="/Error"/> <error statusCode="404" redirect="/404"/> </customErrors> On a sub dir of that domain I am ignoring all routes there by doing routes.IgnoreRoute("Assets/{*pathInfo}"); in the .NET proj and I want to put a custom 404 error page on that and any sub dir's of Assets. The sub dir contains static content like images, css, js etc etc. So in the Error Pages section of IIS I put a redirect to an absolute URL. The web.config for that dir looks like the following: <system.webServer> <httpErrors> <remove statusCode="404" subStatusCode="-1" /> <error statusCode="404" prefixLanguageFilePath="" path="http://mydomain.com/404" responseMode="Redirect" /> </httpErrors> </system.webServer> But I navigate to an unknown URL under that dir and yet I still see the default IIS 404 page. I am also seeing an alert in IIS that reads: You have configured detailed error messages to be returned for both local and remote requests. When this option is selected, custom error configuration is not used. Does this have anything to do with the customErrors mode="RemoteOnly" in the site web.config? I have tried to overwrite the customErrors in the sub dir web.config but nothing changes. Any help would be appreciated. Thanks.

  Read the article

• Folder Redirection Issues - Freezing, Strange Warnings

  - by JCardenas

  I have Folder Redirection set up in a test environment for a couple accounts. I have followed the instructions for setting up the folder security settings here, and I can confirm that folders are created automatically by the system with the correct security settings when a user logs in. The GPO has been configured to automatically move user files up to the redirected folders, and this is working properly. Problems start occurring when a Windows 7 PC is in use. It is rare, but Explorer will lock up when performing a file write operation (move/copy/save from application). This results in the entire system being unusable, with only a hard reset resolving it (Task Manager doesn't start, the "three finger salute" does nothing, apps stop working). The mouse functions, but clicks do nothing. The other issue is that occasionally when copying/creating/modifying files a dialog box will pop up with the message "You need permission to perform this action. You require permission from XYZ\cardenas to make changes to this folder." The folder that was created by copying an existing one has the correct security settings and lists me as the owner. My company will not be implementing Folder Redirection on XP, since we are making a "clean break" with implementing new technologies with the Windows 7 rollout, so this behavior has not been - nor will be - checked for in XP. Thanks in advance for your help!

  Read the article

• phpBB configuration problem under Nginx

  - by zvikico

  Hi, I have a phpBB site running with Nginx (PHP via FastCGI). It works OK. However, some specific actions like moving or deleting a topic fail. Instead, I'm redirected to the forum index. I think it is a problem with the URLs redirection or rewriting. My rewrite rule looks like this: if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?q=$1 last; break; } Any help would be appreciated. My full configuration file is: server { listen 80; server_name forum.xxxxx.com; access_log /xxxxx/access.log; error_log /xxxxx/error.log; location = / { root /xxxxx/phpBB3/; index index.php; } location / { root /xxxxx/phpBB3/; index index.php index.html; if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?q=$1 last; break; } } error_page 404 /index.php; error_page 403 /index.php; error_page 500 502 503 504 /index.php; # serve static files directly location ~* ^.+\.(jpg|jpeg|gif|css|png|js|ico)$ { access_log off; expires 30d; root /xxxxx/phpBB3/; break; } # hide protected files location ~* \.(engine|inc|info|install|module|profile|po|sh|.*sql|theme|tpl(\.php)?|xtmpl)$|^(code-style\.pl|Entries.*|Repository|Root|Tag|Template)$ { deny all; } location ~ \.php$ { fastcgi_pass 127.0.0.1:8888; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /xxxxx/phpBB3/$fastcgi_script_name; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; } }

  Read the article

• How to list rpm packages/subpackages sorted by total size

  - by smci

  Looking for an easy way to postprocess rpm -q output so it reports the total size of all subpackages matching a regexp, e.g. see the aspell* example below. (Short of scripting it with Python/PERL/awk, which is the next step) (Motivation: I'm trying to remove a few Gb of unnecessary packages from a CentOS install, so I'm trying to track down things that are a) large b) unnecessary and c) not dependencies of anything useful like gnome. Ultimately I want to pipe the ouput through sort -n to what the space hogs are, before doing rpm -e) My reporting command looks like [1]: cat unwanted | xargs rpm -q --qf '%9.{size} %{name}\n' > unwanted.size and here's just one example where I'd like to see rpm's total for all aspell* subpackages: root# rpm -q --qf '%9.{size} %{name}\n' `rpm -qa | grep aspell` 1040974 aspell 16417158 aspell-es 4862676 aspell-sv 4334067 aspell-en 23329116 aspell-fr 13075210 aspell-de 39342410 aspell-it 8655094 aspell-ca 62267635 aspell-cs 16714477 aspell-da 17579484 aspell-el 10625591 aspell-no 60719347 aspell-pl 12907088 aspell-pt 8007946 aspell-nl 9425163 aspell-cy Three extra nice-to-have things: list the dependencies/depending packages of each group (so I can figure out the uninstall order) Also, if you could group them by package group, that would be totally neat. Human-readable size units like 'M'/'G' (like ls -h does). Can be done with regexp and rounding on the size field. Footnote: I'm surprised up2date and yum don't add this sort of intelligence. Ideally you would want to see a tree of group-package-subpackage, with rolled-up sizes. Footnote 2: I see yum erase aspell* does actually produce this summary - but not in a query command. [1] where unwanted.txt is a textfile of unnecessary packages obtained by diffing the output of: yum list installed | sed -e 's/\..*//g' > installed.txt diff --suppress-common-lines centos4_minimal.txt installed.txt | grep '>' and centos4_minimal.txt came from the Google doc given by that helpful blogger.

  Read the article

• Problems with freetype on OSX 10.7.4

  - by eythor

  I'm trying to install mplayer with OSD using homebrew. I've added both --enable-menu and --with-freetype-config=/usr/local/Cellar/freetype/2.4.10/freetype-config to the brew recipe. ==> Downloading http://www.mplayerhq.hu/MPlayer/releases/MPlayer-1.1.tar.xz Already downloaded: /Library/Caches/Homebrew/mplayer-1.1.tar.xz xz -dc "/Library/Caches/Homebrew/mplayer-1.1.tar.xz" | /usr/bin/tar xf - ==> ./configure --prefix=/usr/local/Cellar/mplayer/1.1 --cc=cc --host-cc=cc --disable-cdparanoia --disable-libopenjpeg --enable-menu --disable-x11 -- with-freetype-config=/usr/local/Cellar/freetype/2.4.10/freetype-config ./configure --prefix=/usr/local/Cellar/mplayer/1.1 --cc=cc --host-cc=cc --disable-cdparanoia --disable-libopenjpeg --enable-menu --disable-x11 --with -freetype-config=/usr/local/Cellar/freetype/2.4.10/freetype-config Checking for cc version ... clang 4.2.1 (experimental support only) Checking for working compiler ... yes Detected operating system: Darwin Detected host architecture: x86_64 Checking for cross compilation ... no Checking for host cc ... cc Checking for CPU vendor ... GenuineIntel (6:15:10) Checking for CPU type ... Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz For freetype-config I've tried three seperate paths; /usr/X11R6/bin/freetype-config, /usr/X11/bin/freetype-config and the one in Cellar. Checking for freetype always fails: Checking for freetype >= 2.0.9 ... no Checking for fontconfig ... no (FreeType support needed) Although freetype itself seems to be installed. mufasa:bin eythor$ freetype-config --version 15.0.9 mufasa:bin eythor$ freetype-config --ftversion 2.4.10 mufasa:bin eythor$ freetype-config --libs -L/usr/local/Cellar/freetype/2.4.10/lib -lfreetype -lz -lbz2 mufasa:bin eythor$ freetype-config --cflags -I/usr/local/Cellar/freetype/2.4.10/include/freetype2 - I/usr/local/Cellar/freetype/2.4.10/include I'm not sure what to try next or how to figure out why freetype isn't recognized. Can anyone point me in a sensible direction?

  Read the article

• Migrate Windows Server 2008 to a new hard disk 2

  - by MainMa

  Hi, A few weeks ago, I already asked how to move a Windows Server 2008 to a new hard disk. Despite the previous answers and two weeks lost trying to do it, I am always unable to move the OS to the new drive. What I tried: A backup/restore using Windows Backup. This never helped. First, I tried to backup, then copy the backup to a new drive, then restore. This results in "The parameter is incorrect. (0x80070057)" error caused by a bug in Windows Backup. Recently, I attempted to backup to a network share, but I can't restore from it, because of a "*The network path was not found. (0x80070035)" error. Trying the netsh interface ipv4 set address [...] does not work neither (saw at least three different errors, mostly "The interface is unknown.") A previously suggested solution using imagex from Windows AIK results in a non-bootable disk after writing an image to it. When booting from Windows 2008 installation disk (from USB), it finds that the HDD is not bootable and proposes to fix this, but then crashes, resulting in an unbootable USB flash disk (and HDD stays unbootable). As I said in my previous question, doing a clone of a hard disk drive gives an (of course) bootable disk, but Windows complain about hardware changes and cannot start. Now can somebody suggest me another way to move Windows Server 2008 to a new hard disk? Is it at least possible to do, or any hard disk failure/change implements necessarily to reinstall the whole OS?

  Read the article

• How to configure Farsun USB barcode scanner to not auto-trigger

  - by David Grayson

  At my company we have several USB barcode scanners. I'm not sure exactly what model they are, but I think they are the FG9800 from Farsun because that's what they look like on the exterior. They came with a programming manual that is very similar to this document from the Farsun website. When I scan the "Output Firmware Version" barcode, my scanner types the following into the computer: Farsun V2.00 2011-01-01 Is it possible to configure these scanners so they only read barcodes in response to the trigger button being pressed? I don't want them to automatically read barcodes. Additionally, I want this setting to be remembered while the scanner is turned off. Since this scanner only has a USB port, the only way to configure it that I know of is to scan bar codes from the manual (or make your own). I have tried scanning the configuration bar codes for Single Scan (013300), Single Scan No Trigger (013301), and Laser/CCD Timeout - 5 Seconds (0134005) from this document. Sometimes (but not often) this puts the scanner in to the right mode, where it only scans when the button is pressed. Unfortunately, the scanner seems to always leave this mode when it is power cycled. I have also scanned the "Reset Configuration To Defaults" barcode (0B) many times. We have three different scanners like this and I have not been able to successfully configure any of them. If the things I want are not possible with these Farsun-based scanners, is there some other scanner we can use?

  Read the article

• Chroot jail of Nginx and php

  - by sqren

  I'm hosting multiple websites on one VPS, and want to chroot each website, eg. /chroot/website1 /chroot/website2 I'm using makejail, which is a highlevel tool, for creating the jails, and copying the libraries and dependencies. Easy peasy. Each website will need nginx, php and mysql. For php I'm using php5-fpm which actually supports chroot by configuration, however I'm not using this (maybe I should?) My question is which approach of the following three is the better: 1) Every website will have its own seperated instance of nginx, php and mysql. The downside is, that each webserver + php has to listen to a different port. I also need a "master" nginx web server in front of them, reverse proxying to the chrooted servers behind it. Probably most secure, but also most advanced. 2) I don't make any chroot jails manually. I setup one nginx web server, that proxies php requests to php-fpm, on different ports. I can have multiple php-fpm configurations each with is own chroot'ed folder. This is quite managable - however only php will be chrooted. Not the actual webserver. Is this secure enough. Also, I tried this option out, and it seems I will need to use TCP instead of sockets for connecting to MySQL. 3) You tell me ;) I'm quite new to chroot jailing, so please correct me if I'm wrong in my assumptions. I've been reading all the tutorials I could find, however, I find the market for chroot guides very scarce. Any help or inputs much appreciated!

  Read the article

• remote telnet and email

  - by Mustafa Ismail Mustafa

  This issue has been occupying my work for the last few days and I will be understating when I say its driven me up the blasted walls. Essentially, I can ping and tracert the domain jnrcs.org and the subdomains mail.jnrcs.org and mail.jordanredcrescent.org. All three mentioned point to ip address 212.38.147.97. About 4 days ago, when we registered the domain "jnrcs.org" suddenly all external connection to the mail server from outside was lost. Not just mail, but other http based port-forwarded or natted services (such as camera surveillance and pbx services). I tried good old telnet (I'm a linux user) and I get the following output: telnet> o mail.jnrcs.org 25 Trying 212.38.147.97... telnet: Unable to connect to remote host: No route to host telnet> Tracert gives me: traceroute to mail.jnrcs.org (212.38.147.97), 30 hops max, 60 byte packets 1 192.168.1.2 (192.168.1.2) 0.869 ms 0.944 ms * 2 * * * 3 * * * 4 * * * 5 * * * 6 * 212.38.128.118 (212.38.128.118) 33.875 ms 39.187 ms 7 * * * 8 * * * 9 * * * 10 * * * 11 * * 212.38.147.97 (212.38.147.97) 67.621 ms I am stumped. Other friends from all around the world can telnet no problem. What could have possibly happened to make telnet/smtp/pop/imap/http access stop? Please bear in mind I'm primarily a developer but I [am under the delusion] that I can carry my weight in IT administration :) TIA

  Read the article

• external drive enclosure -> software RAID 5?

  - by memilanuk

  Hello all, I have two older PCs on my LAN posing as 'servers'... one running FreeNAS off a USB stick using three 500GB hdds in a ZFS RAID-Z pool serving as storage for the LAN and one running Debian Lenny with an 80GB drive used as a general purpose 'tinker' box that I can ssh into, etc. Problem is that the SMART report for one of those 500GB drives in the FreeNAS box is showing some pre-failure attributes, and the whole array is a little small anyways. Rather than simply replace one 500GB drive with another 500GB drive, and have no backup of the file server, I'd like to upgrade all the drives to 2TB ones - but I have no where to store that much data in the mean while. As such, I started looking at getting a 4-bay external drive enclosure with an eSATA card for the Debian box, with the hopes of creating a RAID5 + LVM setup using those drives and backing the data up to that external drive enclosure. After the backup is done, replace the drives in the FreeNAS box and rebuild the array there and mirror the data back. Then, I'd have both the primary storage (on the FreeNAS box) and a backup (which I don't have currently) using the external drive enclosure on the Debian box. My big question is... most of these external drive boxes seem to claim support for JBOD, RAID 0, 1, 10, 5, etc. - should I presume that is simply fake RAID like many commodity mobos have, and not really usable in Linux? In that case, with all the drives hanging off the one eSATA connection, will Linux (specifically Debian Squeeze, as I plan on upgrading that box here shortly) see all four drives, or just the first one? Will I be able to configure them in a RAID5 array as desired? Thanks, Monte

  Read the article

< Previous Page | 469 470 471 472 473 474 475 476 477 478 479 480  | Next Page >