Search Results

Search found 16230 results on 650 pages for 'three js'.

Page 477/650 | < Previous Page | 473 474 475 476 477 478 479 480 481 482 483 484  | Next Page >

• How to set up QoS on ADSL router (terracom) for prioritizing browsing

  - by DBZ_A

  I want to configure the ADSL router which connects 10+ machines to the internet. I want to give maximum priority to browsing (ports 80,443) and set low priority for bittorrent etc.(port 42180) I have been experimenting with settings , but with no luck. There are three settings which confuse me, along with my understanding. 802.1 Priority - Related to LAN level, possible values 0-7 , higher numbers means higher priority. 'Mark traffic priority' - clueless about this. IPP/DS - IP Precedence - possible values 0-7 ; 6 & 7 are reserved, so set 5 for highest priority. Or when using DSCP - set 46 for highest priority. Please help me in getting this done... Similer question for another model of router here , but with less number of confusing options :) How to configure QoS on home router Update: from discussion on another thread, QoS can control only upstream traffic (from router to the internet) , while this may in turn affect downstream traffic rate, there is no direct control over data coming into the router.

  Read the article

• Export NFS path containing "-" (dash)

  - by qdot

  I'm in a bit of a pinch with NFS exports file. Specifically, I can't find a way to export a directory containing "-" in the path name. Manual (exports(5)) states: Also, each line may have one or more specifications for default options after the path name, in the form of a dash ("-") followed by an option list. The option list is used for all subsequent exports on that line only. It then states: If an export name contains spaces it should be quoted using double quotes. You can also specify spaces or other unusual character in the export name using a backslash followed by the character code as three octal digits. Unfortunately, that is not the case. Specifically, if the pathname contains "-", either verbatim, or with \055 or is enclosed in double quotes, it still refers to the name without "-" Any ideas? I have a large number of directories, all of the form /vol/buildsystem-s3c2440 /vol/buildsystem-tao3530 and I'd prefer to have them all available as nfs exports. Short of replacing the "-" with "_" everywhere in the scripts, can it be done with "-" ?

  Read the article

• Which Ubuntu-like Linux OSs work well on a flash drive?

  - by Evan Kroske

  I want a Linux OS that I can load on a flash drive, but I don't want to relearn an entire operating system. I want to know which tiny Linux installations are most like Ubuntu. For example, I'd like to use the apt-get package manager, the Gedit text editor, and the bash shell. I'd like to use something that's already popular, stable, and highly compatible, but it needs to fit comfortably in one gig of my four-gig flash drive (just the essentials; I'll use the remaining three gigs to store installed programs and files). I have no preference for window managers; I just want something small and fast that works like Ubuntu. What is the most popular Ubuntu-like OS that can be easily run on a thumb drive? Edit: I'm not sure I understand how this works. I don't to use a USB drive as a LiveCD; I want to plug in a USB stick and use the computer as if it was my own. In other words, I want to be able to install programs on the drive on one computer and use them on another. Do any of these OSs let me do that? Please forgive my ignorance.

  Read the article

• DIR $file "File Not Found" vs DIR $filedir shows it....not permissions, not USB

  - by Kev

  I was having this problem before on a USB drive, but now it's happening on my main RAID5-backed hard disk: 2013-10-17 9:37 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel*" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs 2003-09-09 11:29 PM 1,056,768 Manuel d'intervention d'urgence MFC.doc 2004-06-20 10:36 PM 139,849 Manuel d'intervention d'urgence MFC.pdf 2 File(s) 1,196,617 bytes 0 Dir(s) 196,068,691,968 bytes free 2013-10-17 9:38 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel d'intervention d'urgence MFC.doc" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs File Not Found 2013-10-17 9:38 C:\> This is from a Command Prompt window where I went to Properties and told it I wanted to modify who it ran as. I opened it, had it run as me with the "restricted access" unchecked, then ran the above. The file in question has the following ACLs: Administrators, SYSTEM, and OurCompanyUsers. All three have full control of everything. Nobody has any Deny bits set. I am a member of Administrators. So I don't believe it's a permissions issue. It's not a USB drive, so this time there is no question of USB hardware. Windows Server 2003 Standard Edition SP2. What does this mean? Is this more likely a hardware or software problem?

  Read the article

• Browser history, by window

  - by Alex

  I use Chrome --but can switch to another browser if the feature I am about to describe is available. Browsing history, AFAIK in Chrome is sorted exclusively chronologically. Very often however, I will be working on a particular task on my laptop and have multiple (read: a lot) of tabs open in a single Chrome window for that task. Before finishing that task, I may need to work on something else --so I will open another window and minimize the other one, and start researching an entirely different issue. Over the course of a day, I may end up with 10-15 windows with many tabs each. This raises two issues: (a) memory usage and (b) quickly switching between the most relevant two or three windows. I solve these two problems like any regular guy probably would --closing windows. I want to be able to reopen specific windows that I have closed, such that the tabs that were open in that window at the time the window was closed will reopen. Ideally, closed windows will be sorted by the time they were closed and identified by the tabs that were open (even more ideally, I would be able to name these windows (contemporaneously or in the history menu)). Now that I describe this, what I am asking is: does any browser offer the ability to "save and close" windows? (This is distinct from an option to auto-restore tabs upon reopening the browser) Thank you.

  Read the article

• Exchange 2010 Mail Enabled Public Folder Unable to Recieve External (anon) e-mail.

  - by Alex

  Hello All, I am having issues with my "Public Folders" mail enabled folders receiving e-mails from external senders. The folder is setup with three Accepted Domains (names changed for privacy reasons): 1 - domain1.com (primary & Authoritative) 2 - domain2.com (Authoritative) 3 - domain3.com (Authoritative) When someone attempts to send an e-mail to [email protected] from inside the organization, the e-mail is received and placed in the appropriate folder. However, when someone tries to send an e-mail from outside the organization (such as a gmail account), the following error message is received: "Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 Recipient address rejected: User unknown (state 14)." When I try to send an e-mail to the same folder, using the same e-mail address above ([email protected]), but with domain2.com instead of domain3.com, it works as intended (both internal & external). I have checked, double checked, and triple checked my DNS settings comparing those from domain2 & domain3 with them both appearing identical. I have tried recreating the folders in question with the same results. I have also ran Get-PublicFolderClientPermission "\Web Programs\folder" with the following results for user anonymous: RunspaceId : 5ff99653-a8c3-4619-8eeb-abc723dc908b Identity : \Web Programs\folder User : Anonymous AccessRights : {CreateItems} Domain2.com & Domain3.com are duplicates of each other, but only domain2.com works as intended. All other exchange functions are functioning properly. If anyone out there has any suggestions, I would love to hear them. I've just hit a brick wall. Thanks for all your help in advance! --Alex

  Read the article

• Server Directory Not Accessible

  - by GusDeCooL

  I got strange things happen on live server, but normal in local server. My local server is using mac, and my live server is linux. Consider i try to access some files http://redddor.babonmultimedia.com/assets/images/map-1.jpg This work correctly. http://redddor.babonmultimedia.com/assets/modules/evogallery/check.php Return 404, I'm pretty sure my file is in there and there is no typo mistake. How come it give me 404? There is only one .htaccess on the root server and it's configuration is like this. # For full documentation and other suggested options, please see # http://svn.modxcms.com/docs/display/MODx096/Friendly+URL+Solutions # including for unexpected logouts in multi-server/cloud environments # and especially for the first three commented out rules #php_flag register_globals Off #AddDefaultCharset utf-8 #php_value date.timezone Europe/Moscow Options +FollowSymlinks RewriteEngine On RewriteBase / <IfModule mod_security.c> SecFilterEngine Off </IfModule> # Fix Apache internal dummy connections from breaking [(site_url)] cache RewriteCond %{HTTP_USER_AGENT} ^.*internal\ dummy\ connection.*$ [NC] RewriteRule .* - [F,L] # Rewrite domain.com -> www.domain.com -- used with SEO Strict URLs plugin #RewriteCond %{HTTP_HOST} . #RewriteCond %{HTTP_HOST} !^www\.example\.com [NC] #RewriteRule (.*) http://www.example.com/$1 [R=301,L] # Exclude /assets and /manager directories and images from rewrite rules RewriteRule ^(manager|assets)/*$ - [L] RewriteRule \.(jpg|jpeg|png|gif|ico)$ - [L] # For Friendly URLs RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php?q=$1 [L,QSA] # Reduce server overhead by enabling output compression if supported. #php_flag zlib.output_compression On #php_value zlib.output_compression_level 5

  Read the article

• Disk IO slow on ESXi, even slower on a VM (freeNAS + iSCSI)

  - by varesa

  I have a server with ESXi 5 and iSCSI attached network storage(4x1Tb Raid-Z on freenas 8.0.4). Those two machines are connected to each other with Gigabit ethernet. The raid-z volume is divided into three parts: two zvols, shared with iscsi, and one directly on top of zfs, shared with nfs and similar. I ssh'd into the freeNAS box, and did some testing on the disks. I used ddto test the third part of the disks (straight on top of ZFS). I copied a 4GB (2x the amount of RAM) block from /dev/zero to the disk, and the speed was 80MB/s. Other of the iSCSI shared zvols is a datastore for the ESXi. I did similar test with time dd .. there. Since the dd there did not give the speed, I divided the amount of data transfered by the time show by time. The result was around 30-40 MB/s. Thats about half of the speed from the freeNAS host! Then I tested the IO on a VM running on the same ESXi host. The VM was a light CentOS 6.0 machine, which was not really doing anything else at that time. There were no other VMs running on the server at the time, and the other two "parts" of the disk array were not used. A similar dd test gave me result of about 15-20 MB/s. That is again about half of the result on a lower level! Of course the is some overhead in raid-z - zfs - zvolume - iSCSI - VMFS - VM, but I don't expect it to be that big. I belive there must be something wrong in my system. I have heard about bad performance of freeNAS's iSCSI, is that it? I have not managed to get any other "big" SAN OS to run on the box (NexentaSTOR, openfiler). Can you see any obvious problems with my setup?

  Read the article

• Cisco VPN endpoints disconnecting from a VLAN

  - by dunxd

  I have a number of Cisco ASA 5505 and PIX 506e around the world acting as VPN endpoints. They connect to a Cisco VPN Concentrator 3000 at HQ. I am using EZVPN to set up the VPN (i.e. most of the config is central on the VPN Concentrator) The majority of endpoints work absolutely fine. However, there are three that do not. 2 ASAs and 1 PIX get disconnected from one of the VLANs on our network. This is the VLAN that my monitoring server runs on - so those endpoints look as if they have gone down. However, I can still ping the endpoints from our user VLAN. If I then SSH onto the endpoint, and do a ping to my monitoring server, the connection comes back. Then after about 10 minutes it stops working again. I've looked at the configuration of my endpoints, and I can't see any significant differences. One common feature is that the affected endpoints are connecting to the internet via retail quality routers. However, I don't see how this could affect traffic within a VPN tunnel. Any ideas or suggestions? I've also got a thread on Cisco's forums at https://supportforums.cisco.com/thread/344638. One other person has reported the same problem.

  Read the article

• Windows 7 hangs while loading desktop

  - by Joshua

  I am facing a weird problem. My computer hangs while loading the desktop, and only the background shows up; no icons or bars load. If I power the system on and off about 4-6 times, I may be able to use it normally. The desktop loads normally after rebooting or in safe mode; this only occurs when I start the system normally. I've tried several things to fix it, such as removing all start-up items, but it still doesn't solve the problem. What should I do? I found three major errors in Event Viewer: Source: Microsoft-Windows-DistributedCOM Level: Error DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server: {7D096C5F-AC08-4F1F-BEB7-5C22C517CE39} Source: Microsoft-Windows-DistributedCOM Level: Error DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server: {7D096C5F-AC08-4F1F-BEB7-5C22C517CE39} Source: Service Control Manager Level: Error The Network List Service service depends on the Network Location Awareness service which failed to start because of the following error: The dependency service or group failed to start.

  Read the article

• Unable to connect to CopSSH when running Windows service, works when running sshd directly

  - by Joe Enos

  I've been using CopSSH (that uses OpenSSH and Cygwin, so I don't know which of the three is the problem) as my SSH server application at home on Windows 7 Ultimate 32 bit. I have used it for about a year with no real problems, other than it sometimes takes 2 or 3 connection attempts to get through, but it's always worked within a few attempts. A few days ago, it just stopped working. The Windows service is still running, and I've rebooted, restarted the service, etc. with no change. On the client (using Putty on Windows), I get the message "Software caused connection abort". On the server, my event viewer registers the following: fatal: Write failed: Socket operation on non-socket I finally got it working, but only by executing sshd.exe directly from the command line on the server. No special flags or options, just straight execution, and then when I connect remotely, it goes through. I do have firewall and anti-virus software which appears to be configured properly, but the fact that things work when running sshd.exe also indicates that the firewall is fine. I thought the service and executable did exactly the same thing, but apparently there's some difference. Does anyone have any ideas on where I should look for the problem? If I can't find something, I suppose I can write a Windows service or scheduled task that fires off sshd.exe directly and ensures that it stays running, but that's kind of a last resort, since it's just wrapping around something that should already work. I appreciate your help.

  Read the article

• Nginx proxy domain to another domain with no change URL

  - by Evgeniy

  My question is in the subj. I have a one domain, that's nginx's config of it: server { listen 80; server_name connect3.domain.ru www.connect3.domain.ru; access_log /var/log/nginx/connect3.domain.ru.access.log; error_log /var/log/nginx/connect3.domain.ru.error.log; root /home/httpd/vhosts/html; index index.html index.htm index.php; location ~* \.(avi|bin|bmp|css|dmg|doc|docx|dpkg|exe|flv|gif|htm|html|ico|ics|img|jpeg|jpg|js|m2a|m2v|mov|mp3|mp4|mpeg|mpg|msi|pdf|pkg|png|pps|ppt|pptx|ps|rar|rss|rtf|swf|tif|tiff|txt|wmv|xhtml|xls|xml|zip)$ { root /home/httpd/vhosts/html; access_log off; expires 1d; } location ~ /\.(git|ht|svn) { deny all; } location / { #rewrite ^ http://connect2.domain.ru/; proxy_pass http://127.0.0.1:8080/; proxy_redirect off; proxy_hide_header "Cache-Control"; add_header Cache-Control "no-store, no-cache, must-revalidate, post-check=0, pre-check=0"; proxy_hide_header "Pragma"; add_header Pragma "no-cache"; expires -1; add_header Last-Modified $sent_http_Expires; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } I need to proxy connect3.domain.ru host to connect2.domain.ru, but with no URL changed in browser's address bars. My commented out rewrite line could solve this problem, but it's just a rewrite, so I cannot stay with the same URL. I know that this question is easy, but please help. Thank you.

  Read the article

• Creating RAID1 on Windows Server causes not enough disk space error

  - by northpole

  I have three disks. Disk0 (boot), Disk1 and Disk2. Disk 1 and 2 are both unformatted and unallocated drives. I am trying to mirror Disk0 to Disk1. They are both Dynamic and are both the same size (1TB). When I select Disk1 to be the mirror I get the error "There is not enough space available on the disk(s) to complete this operation". I have spent several hours searching for a solution but have not found one. Why do I get this error when they are both the same size? EDIT: Shrinking the volume size on the boot disk by 100MB allowed me to get past this error. From what I read the mirror drive needs to be the same size or larger than the boot drive. So I am confused why that change worked. However, I now get the error " all disks holding extents for a given volume must have the same sector size and the sector size must be valid". I believe this is because the drives are different and one has 512B and the other is the Advanced Drive that is 4KB. What the different sector sizes cause both problems? If I got the same disks would both issues go away?

  Read the article

• How to split a text file into multiple text files

  - by Andrew

  I have a text file called entry.txt that contains the following: [ entry1 ] 1239 1240 1242 1391 1392 1394 1486 1487 1489 1600 1601 1603 1657 1658 1660 2075 2076 2078 2322 2323 2325 2740 2741 2743 3082 3083 3085 3291 3292 3294 3481 3482 3484 3633 3634 3636 3690 3691 3693 3766 3767 3769 4526 4527 4529 4583 4584 4586 4773 4774 4776 5153 5154 5156 5628 5629 5631 [ entry2 ] 1239 1240 1242 1391 1392 1394 1486 1487 1489 1600 1601 1603 1657 1658 1660 2075 2076 2078 2322 2323 2325 2740 2741 2743 3082 3083 3085 3291 3292 3294 3481 3482 3484 3690 3691 3693 3766 3767 3769 4526 4527 4529 4583 4584 4586 4773 4774 4776 5153 5154 5156 5628 5629 5631 [ entry3 ] 1239 1240 1242 1391 1392 1394 1486 1487 1489 1600 1601 1603 1657 1658 1660 2075 2076 2078 2322 2323 2325 2740 2741 2743 3082 3083 3085 3291 3292 3294 3481 3482 3484 3690 3691 3693 3766 3767 3769 4241 4242 4244 4526 4527 4529 4583 4584 4586 4773 4774 4776 5153 5154 5156 5495 5496 5498 5628 5629 5631 I would like to split it into three text files: entry1.txt, entry2.txt, entry3.txt. Their contents are as follows. entry1.txt: [ entry1 ] 1239 1240 1242 1391 1392 1394 1486 1487 1489 1600 1601 1603 1657 1658 1660 2075 2076 2078 2322 2323 2325 2740 2741 2743 3082 3083 3085 3291 3292 3294 3481 3482 3484 3633 3634 3636 3690 3691 3693 3766 3767 3769 4526 4527 4529 4583 4584 4586 4773 4774 4776 5153 5154 5156 5628 5629 5631 entry2.txt: [ entry2 ] 1239 1240 1242 1391 1392 1394 1486 1487 1489 1600 1601 1603 1657 1658 1660 2075 2076 2078 2322 2323 2325 2740 2741 2743 3082 3083 3085 3291 3292 3294 3481 3482 3484 3690 3691 3693 3766 3767 3769 4526 4527 4529 4583 4584 4586 4773 4774 4776 5153 5154 5156 5628 5629 5631 entry3.txt: [ entry3 ] 1239 1240 1242 1391 1392 1394 1486 1487 1489 1600 1601 1603 1657 1658 1660 2075 2076 2078 2322 2323 2325 2740 2741 2743 3082 3083 3085 3291 3292 3294 3481 3482 3484 3690 3691 3693 3766 3767 3769 4241 4242 4244 4526 4527 4529 4583 4584 4586 4773 4774 4776 5153 5154 5156 5495 5496 5498 5628 5629 5631 In other words, the [ character indicates a new file should begin. Is there any way I can accomplish automatic text file splitting? My eventual, actual input entry.txt actually contains 200,001 entries. Doing the text split in either Windows or Linux would be great. I do not have access to a Mac machine. Thanks!

  Read the article

• My email server is being blocked by Yahoo: TS03 Message permanently deferred.

  - by bilygates

  Hello, My mail server has been getting the following error from Yahoo's mail servers since about a month: postfix/smtp[23791]: host g.mx.mail.yahoo.com[98.137.54.238] refused to talk to me: 421 4.7.1 [TS03] All messages from [my ip] will be permanently deferred; Retrying will NOT succeed. See http:// postmaster.yahoo.com/421-ts03.html I have exchanged about 4 emails with Yahoo's support team. The first three seemed like automated messages, and the 4th told me that there is nothing they can do, but if I change my policies I can send them another email in 6 months. They also told me: However, based on the information you have provided us, we cannot systematically deliver your email to the Inbox at this time. We suggest that you ask your users to set up a filter in Yahoo! Mail to ensure that they get your email messages in their Inbox. The problem is that my email doesn't even get to their Spam folder. The server won't allow any connections. I have never sent spam messages, not even newsletters. I only send emails for my new users so they can activate their account. I've also implemented DKIM and told Yahoo about this. I have checked my configuration with http://www.myiptest.com/staticpages/index.php/DomainKeys-DKIM-SPF-Validator-test and it reports that both SPF and DKIM are set up correctly. What should I do? Basically, I'm losing new users every day. Any help will be appreciated. P.S.: I apologize if this particular question has already been asked. I searched for it but didn't find it.

  Read the article

• Java applet class never found

  - by Andrew

  I am having a problem with the java plugins of all three major browsers: chromium, firefox and Internet Explorer. The issue is that applets will always fail to load and yield errors no matter what website or what applet I am trying to use. I can not see any of the example applets on oracle's website; I can not launch the minecraft browser applet; nor can I launch any applet across the web using any browser. I always receive a "class not found:AppletClassHere.class" error. I know that my browser plugin must be working correctly because I can launch the Cisco Nac applet each time I connect to my network and I can launch my own simple applets offline. I am connecting to the internet through a vpn in case that is important. It also seems like a lot of other people I know are having this issue. Re-installing the plugin does not appear to fix the issue. I am asking this question to find out the cause of this problem, and any possible solutions. Thank you.

  Read the article

• Software to clean up photos of whiteboards and documents?

  - by Norman Ramsey

  I take a lot of photos of whiteboards, blackboards, and so on for teaching purposes (examples online through May 2010). I'm interested in cleaning them up for archival purposes, preferably using Linux. Commercial products ClearBoard and PhotoNote are priced a little aggressively for my purposes, plus my students would like to have this capability too. Does anyone know of any good, open source software for Converting photographs to images with just a few colors? Eliminating perspective distortion? Removing unwanted junk from around the edges of an image? or anything like that? I'm imagining that I start out with a picture of my whiteboard using red and black markers, and I end up with a three-color image using just white, red, and black. Or I photograph a laser-printed document and end up with a clean black-and-white image. I have tried standard tools that reduce the number of colors in an image, and they do a terrible job—probably because they are trying to reproduce the uneven illumination of the original image. Command-line Linux tools would be ideal.

  Read the article

• Set up WLAN in 3-level house

  - by Balint Erdi

  I'm having a hard time setting up the network in our house. It has three levels (basement, ground floor, first level). The WLAN is set up by an ASUS RT-N12 router which provides perfect coverage for the ground floor and the basement. However, I set up my "home office" in the basement where the signal barely arrived. So I purchased a TP-Link TL-WA901ND (300 Mbps) Access Point which I set up in the other corner of the ground floor to expand the ASUS router's range. I used the AP's Repeater mode for that. The distance between my computer and the TP-Link AP is 6-7 meters. There is a staircase going down from the ground floor to the basement so there are no solid walls between the computer and the AP. This setup mostly works (I am writing this from the basement) but it is not reliable (the signal strength sometimes goes down to ~40% of the max) sometimes so I wonder if I am doing it correctly or if there is a better way. Screenshot of the router's and the AP's dashboard screen follow: Any comments on what I am doing wrong or hints for improvement are appreciated. Thank you. UPDATE Tried one more thing, setting up the TP-LINK AP in Access Point mode. That way, I can make it use a different SSID. I enabled WDS/Bridge so that it expands the range of the ASUS router (see screenshot). That does not work, either, if I connect to the network set up by the TP-LINK device (PELSTER-2), I can't reach the external network (the Internet). It seems the problem always comes back to this, the TP-LINK does not have access to the external network, whatever its mode of operation.

  Read the article

• iptables: allowing incoming for 192.168.1.0/24 allowed incoming for all?

  - by nortally

  The internal side of my ISP router has three devices: ISP router 128.128.43.1 Firewall router 128.128.43.2 Server 128.128.43.3 Behind the Firewall router is a NAT network using 192.168.100.n/24 This question is regarding iptables running on the Server. I wanted to allow access to port 8080 only from the NAT clients behind the Firewall router, so I used this rule -A Firewall-1-INPUT -s 192.168.100.0/24 -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT This worked, but UNEXPECTEDLY ALLOWED GLOBAL ACCESS, which resulted in our JBOSS server getting compromised. I now know that the correct rule is to use the Firewall router's address instead of the internal network, but can anyone explain why the first rule allowed global access? I would have expected it to just fail. Full config, mostly lifted from a RedHat server: *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :Firewall-1-INPUT - [0:0] -A INPUT -j Firewall-1-INPUT -A FORWARD -j Firewall-1-INPUT -A Firewall-1-INPUT -i lo -j ACCEPT -A Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT -A Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A Firewall-1-INPUT -m comment --comment "allow ssh from all" -A Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A Firewall-1-INPUT -m comment --comment "allow https from all" -A Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT -A Firewall-1-INPUT -m comment --comment "allow JBOSS from Firewall" ### THIS RESULTED IN GLOBAL ACCESS TO PORT 8080 ### -A Firewall-1-INPUT -s 192.168.100.0/24 -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT ### THIS WORKED -A Firewall-1-INPUT -s 128.128.43.2 -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPt ### -A Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited COMMIT

  Read the article

• Windows 7 just deleted 4 days of work wtf!?

  - by Mat

  Hey! I'm just a bit about to freak out. I just finished a project and rebooted my computer. It didn't want to boot anymore so I had to use the windows 7 system repair option. it run for a minute and then booted up. Now most of my sourcecode from the last 4 days of work is gone! background: sometimes (most often after installing new software) my notebook won't boot up anymore. It will just show the little Win 7 flag, but not read from the harddisk anymore. If I hardabord and reboot then, it asks me whether to start windows normally (which won't work) or to run "windows startup repair". If i run it, it does some stuff for about two or three minutes and then I can boot windows again. Usually after this, .exe files i added to the computer during previous days are gone - but other files so far were not touched. But now, after this happened, a whole bunch of ".as" (ActionScript source files) from my project are gone!! does anyone know where and whether there's a way to recover them?? please help! Thank you!

  Read the article

• Using secure proxies with Google Chrome

  - by cYrus

  Whenever I use a secure proxy with Google Chrome I get ERR_PROXY_CERTIFICATE_INVALID, I tried a lot of different scenarios and versions. The certificate I'm using a self-signed certificate: openssl genrsa -out key.pem 1024 openssl req -new -key key.pem -out request.pem openssl x509 -req -days 30 -in request.pem -signkey key.pem -out certificate.pem Note: this certificate works (with a warning since it's self-signed) when I try to setup a simple HTTPS server. The proxy Then I start a secure proxy on localhost:8080. There are a several ways to accomplish this, I tried: a custom Node.js script; stunnel; node-spdyproxy (OK, this involves SPDY too, but later... the problem is the same); [...] The browser Then I run Google Chrome with: google-chrome --proxy-server=https://localhost:8080 http://superuser.com to load, say, http://superuser.com. The issue All I get is: Error 136 (net::ERR_PROXY_CERTIFICATE_INVALID): Unknown error. in the window, and something like: [13633:13639:1017/182333:ERROR:cert_verify_proc_nss.cc(790)] CERT_PKIXVerifyCert for localhost failed err=-8179 in the console. Note: this is not the big red warning that complains about insecure certificates. Now, I have to admit that I'm quite n00b for what concerns certificates and such, if I'm missing some fundamental points, please let me know.

  Read the article

• LAMP server VM issues

  - by nullArray

  After getting a recommendation to salvage a wiki by installing a LAMP server, I went on the prowl for a good virtualized one. I used the VMware Player version. Since the windows box has Bonjour, I can, for example, go to http://lamp.local. and it works see the web client. The problem is, I can't ssh to a directory to scp the files I need, mount a usb thumbdrive (usbfs is unsupported) nor get samba working. I can't even update the ubuntu installation, it fails. I've tried bridged, nat and host-only networking settings in VMware Player. Bridged gives me an undefined IP, while the other two each have different IPs. All three settings allow me to access the web config, but none of them give me samba access. Windows usually freezes, then reports that it cannot connect. I'd rather not wipe a box to do a dedicated install, is there I way I can get this VM working, or are there better LAMP VMs out there? This one came already working and set up with VMware Player, so I thought it would be perfect... Thanks,

  Read the article

• Exchange Server 2010: move mailboxes from recoveded and mounted edb to user's mailbox

  - by user36090

  One of our exchange servers crashed, and I am trying to recover the mailboxes. We had 1 exchange 2003 server named "apex" and 1 exchange 2010 server named "2008Enterprise. the exchange 2010 server named "2008Enterprise" crashed. I created a new exchange 2010 server named "Providence". I ran the command on Providence: New-MailboxDatabase -Recovery -Name JBCMail -Server Providence -EdbFilePath "c:\data\Exchange\Mailbox\Mailbox Database 0579285147\Mailbox Database 0579285147.edb" -LogFolderPath "c:\data\Exchange\Mailbox\Mailbox Database 0579285147" this command executed and finished without error I then ran the command: eseutil /p E00 this command was executed from the below directory: c:\data\Exchange\Mailbox\Mailbox Database 0579285147 I then mounted the JBCMail with the mount command note: I do not have my full typed command. Inside my Exchange Management Console (EMC) I can view the new mailbox database named JBCMail. The JBCMail database is show as mounted on the exchange server named Providence. I can see the crashed Exchange server named 2008Exchange. In the EMC the crashed exchange server states the Copy Status under ServerConfiguration-Mailbox is ServiceDown. From here I need to recover three mailboxes The mail boxes are on the apex server. How do I move the mailboxs from apex to Providence? How do I restore the mailboxes from JBCmail mounted database to the user's mailbox? I do not fully understand how to use the Restore-Mailbox command because when I use this command it tries to restore the mailbox to the dead apex server. Restore-Mailbox -ID 'Jason Young' -RecoveryDatabase JBCMail

  Read the article

• Mac compatible Web-Development Tools

  - by Derek Adair

  Hi, I'm looking for any Mac compatibile development tools that are tried and tested. I'm quite sick of my MySQL query browser crashing... And i'm sure there is probably better software out there anyways... At the moment my focus is dedicated to application development using PHP/MySQL/Ajax. (although, I will be learning ActionScript/Flex shortly). Here are the apps I regularly use and a general idea of the environment I work in: Hosting - localhost: Mamp Production: Amazon EC2 IDE - Coda: PHP/Mysql/Javascript Mysql - PHPMyAdmin MySQL query browser FTP - Coda FileZilla X11 is used for connecting to my production environment I am mainly looking for... -tools that will help me better manage (create, edit... whatever) databases. -Version control. This is huge as I'm working with a team of three other developers (we reeeeeeaaally need to standardize our environments..) Although any cool little tools to make my job easier are always a plus! I am unable to insert more than one link as I'm not rated on this forum.

  Read the article

• Physical-to-virtual for personal use

  - by Journeyman Geek

  One of my current projects involves reducing the number of old computers lying around. So far, the office systems have been downsized from 5 to 2. One system which had no data on it was dumped entirely, while three other identical boxes were consolidated into to one (I swap hard drives as needed and they just work(tm)). I want to make further cuts. The physical systems in question all run windows xp sp3, and were old Pentium 4s with 256 MB of RAM. Currently, I have got a VirtualBox running on another system. My intention is to migrate all services to that. We can assume that disk space and RAM on the host is not an issue. I'd rather not go with a client-server physical-to-virtual (P2V) method like what VirtualBox uses now. I have a few specific concerns as well - specifically whether I'd need to reactivate or sysprep for dissimilar hardware first. An offline tool for imaging (Windows or Linux) would not be an issue since the drives could be mounted onto another system I have anyway or I could use a LiveCD. What would be my options for P2V conversion, and what would I need to keep in mind when doing this?

  Read the article

< Previous Page | 473 474 475 476 477 478 479 480 481 482 483 484  | Next Page >