Search Results

Search found 25974 results on 1039 pages for 'source routing'.

Page 475/1039 | < Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >

  • IPCop Packet Mangling

    - by Zenham
    I've found myself in a pickle replacing an old firewall for a client this afternoon. I'm configuring their new IPCop firewall (1.4.21), Zerina OpenVPN addon is installed. What I need to do: There are three network interfaces, currently set up as red (WAN), green (LAN, 192.168.20.0/24) and orange (remote network 10.1.20.0/24). The orange interface is a direct fiber link to another organization. Simple description: Traffic and networks appear to be properly configured at this point, but I have many (150+) specific IPs on the LAN which, when accessing the resources on the 10.1.20.x network, need to be mangled to appear to be coming from the 10.1.20.0/24 network (and return traffic properly delivered). The routing on the far side was configured earlier and should be fine, but I need to redirect any packets coming across destined for those IPs to end up at their proper destination. The addressing is fixed and predictable (ie. 192.168.20.125 - 10.1.20.125). I need to insert whatever rules I have into the IPCop ruleset through /etc/rc.local I know, I'm just not sure about how I should structure this. There's CUSTOMOUTPUT and CUSTOMINPUT targets, both which currently just consist of the single rule redirecting packets to the OVPNOUTPUT/OVPNINPUT targets, so I'm guessing I should insert a rule matching outbound packets destined for the 10.1.20.x network and redirecting to a new target (maybe called TO-ORANGE) and a rule at the top of CUSTOMINPUT which redirects to a FROM-ORANGE target. Under those targets, I would have rules which do the IP matching and mangling. Am I approaching this right? If so, I'm not very familiar with mangle, and would appreciate seeing examples of how to write that source-IP rewrite. If not, how would you suggest doing this? TIA! edit: I notice additionally that the nat table has CUSTOMPREROUTING and CUSTOMPOSTROUTING targets, I guess I could alternatively post the rules in there....

    Read the article

  • I love programming but never get projects started

    - by 0xHenry
    I read this question and the most voted answer and said to myself "Those things are what I want to do! But why the heck I'm not doing it?" The problem here is that I can't get anything started. I hope you get some kind of idea what I'm interested in and can help me continue programming. I'm interested in embedded programming and I'd like to learn some ARM assembly. I think those could be combined with image processing. Also I'd love to create programs that are actually useful to some people but it seems like there are already multiple programs for pretty much every purpose. Maybe if I found an interesting program without open source alternatives I could get a great project to work on. How could I get myself to finally start a project or few and keep myself interested in them? I just want to get myself to do something I love.

    Read the article

  • Maximize Your Quadcopter’s Range with a Wi-Fi Repeater

    - by Jason Fitzpatrick
    The majority of commercial quadcopters use Wi-Fi for remote control and suffer from a fairly limited range. This simple hack uses an Wi-Fi router as an extender to radically expand the range of your copter. There’s no heavy modification or code tweaking required, all you need is a power source for the router and the ability to set it up as a repeater. The extra signal boost provided by the repeater extends the range from an average of 50 meters to over 250 meters. Check out the video above to see it in action. If you’re looking for a more dependable but more labor intensive way to extend the range of your copter, you can also retrofit it with a traditional radio-controlled remote. [via Hack A Day] HTG Explains: Is UPnP a Security Risk? How to Monitor and Control Your Children’s Computer Usage on Windows 8 What Happened to Solitaire and Minesweeper in Windows 8?

    Read the article

  • Application Lifecycle Management with Visual Studio 2010 – Wrox Book

    - by Guy Harwood
    After running with a somewhat disconnected set of tools (vs 2008, Ontime, sharepoint 2007) for managing our projects we decided to make the move to Team Foundation Server 2010.  With limited coverage of the product available online i went in search of a book and found this… View this book on the Wrox website I must point out that i have only read 10 of the 26 chapters so far, mainly the ones that cover source code control, work item tracking and database projects.  This enables our dev team to get familiar with it before switching project management over at a future date. Needless to say i am very impressed with the detail it provides, answering pretty much every question i had about TFS so far.  I'm looking forward to digging into the sections on testing, code analysis and architecture. Highly recommended.

    Read the article

  • Oracle üzleti intelligencia és MySQL adatforrás

    - by Fekete Zoltán
    A tegnap Oracle sajtóhír a következo bejelentésrol szól: megjelent a MySQL Cluster 7.1 új verziója. Ez is az Oracle elkötelezettségét jelzi a MySQL fejlesztése és az Open Source mellett. A témáról nemrég irt a HWSW a következo cikkben: Az Oracle betekintést engedett a MySQL jövojébe. Idézetek a cikkbol: "Santa Clarában az O'Reilly MySQL Conference and Expo rendezvényen személyesen az Oracle fomérnöke, Edward Screven beszélt arról, milyen jövot szánnak a MySQL-nek." "Screven igyekezett megerosíteni az Oracle korábbi vállalásait. "Továbbra is fejleszteni és javítani és támogatni fogjuk a MySQL-t" - szögezte le a fomérnök..." Miért is érdekes ez? Azért mert Oracle Business Intelligence csomagok egyik adatforrása a MySQL adatbázis. Azért mert az Oracle BI csomagok lelke, az Oracle BI Server egyedülállóan jól integrál heterogén adatforrásokat, mindezt egyetlen közös üzleti metaadat réteggel! Többek között erre nem képesek más szállítók.

    Read the article

  • libimobiledevice wants to remove all my other packages

    - by Dror Cohen
    When running the command sudo apt-get remove libimobiledevice2 I get: The following packages will be REMOVED: ... gdm gdm-guest-session gnome-power-manager gnome-session gnome-session-bin gvfs-backends indicator-power indicator-session kde-plasma-desktop kde-standard libgpod-common libgpod4 libimobiledevice2 nautilus-share ubuntu-desktop upower` Is it really nessecary to remove all of my KDE and Gnome packages? The source of the problem is that the installed oneric package doesn't recognize my ios 5.1 - so I wanted to switch to the latest and greatest (1.0.7 and if that's not good enough I'll go to the dev version 1.1.2). I'm using oneric 64bit.

    Read the article

  • Microsoft Townhall, An Example for Azure and MVC

    - by Shaun
    Microsoft just released an example named Microsoft Townhall which was built and deployed on Azure. It uses ASP.NET MVC as its webiste framework and the SQL Azure plus LinqToSQL as its the database and the ORM framework. You can download the source code at the MSDN Code Gallery. Basides the Azure it might be more useful to us to learn how they utilized ASP.NET MVC. Just a very quickly review I found it utilized the Enterprise Library Unity as the main IoC container for controllers, services and repositories and customized a lot of ModelBinders, Filters, etc.   Hope this helps, Shaun   All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • Building the Elusive Windows Phone Panorama Control

    When the Windows Phone 7 Developer SDK was released a couple of weeks ago at MIX10 many people noticed the SDK doesnt include a template for a Panorama control.   Here at Clarity we decided to build our own Panorama control for use in some of our prototypes and I figured I would share what we came up with. There have been a couple of implementations of the Panorama control making their way through the interwebs, but I didnt think any of them really nailed the experience that is shown in the simulation videos.   One of the key design principals in the UX Guide for Windows Phone 7 is the use of motion.  The WP7 OS is fairly stripped of extraneous design elements and makes heavy use of typography and motion to give users the necessary visual cues.  Subtle animations and wide layouts help give the user a sense of fluidity and consistency across the phone experience.  When building the panorama control I was fairly meticulous in recreating the motion as shown in the videos.  The effect that is shown in the application hubs of the phone is known as a Parallax Scrolling effect.  This this pseudo-3D technique has been around in the computer graphics world for quite some time. In essence, the background images move slower than foreground images, creating an illusion of depth in 2D.  Here is an example of the traditional use: http://www.mauriciostudio.com/.  One of the animation gems I've learned while building interactive software is the follow animation.  The premise is straightforward: instead of translating content 1:1 with the interaction point, let the content catch up to the mouse or finger.  The difference is subtle, but the impact on the smoothness of the interaction is huge.  That said, it became the foundation of how I achieved the effect shown below.   Source Code Available HERE Before I briefly describe the approach I took in creating this control..and Ill add some **asterisks ** to the code below as my coding skills arent up to snuff with the rest of my colleagues.  This code is meant to be an interpretation of the WP7 panorama control and is not intended to be used in a production application.  1.  Layout the XAML The UI consists of three main components :  The background image, the Title, and the Content.  You can imagine each  these UI Elements existing on their own plane with a corresponding Translate Transform to create the Parallax effect.  2.  Storyboards + Procedural Animations = Sexy As I mentioned above, creating a fluid experience was at the top of my priorities while building this control.  To recreate the smooth scroll effect shown in the video we need to add some place holder storyboards that we can manipulate in code to simulate the inertia and snapping.  Using the easing functions built into Silverlight helps create a very pleasant interaction.    3.  Handle the Manipulation Events With Silverlight 3 we have some new touch event handlers.  The new Manipulation events makes handling the interactivity pretty straight forward.  There are two event handlers that need to be hooked up to enable the dragging and motion effects: the ManipulationDelta event :  (the most relevant code is highlighted in pink) Here we are doing some simple math with the Manipulation Deltas and setting the TO values of the animations appropriately. Modifying the storyboards dynamically in code helps to create a natural feel.something that cant easily be done with storyboards alone.   And secondly, the ManipulationCompleted event:  Here we take the Final Velocities from the Manipulation Completed Event and apply them to the Storyboards to create the snapping and scrolling effects.  Most of this code is determining what the next position of the viewport will be.  The interesting part (shown in pink) is determining the duration of the animation based on the calculated velocity of the flick gesture.  By using velocity as a variable in determining the duration of the animation we can produce a slow animation for a soft flick and a fast animation for a strong flick. Challenges to the Reader There are a couple of things I didnt have time to implement into this control.  And I would love to see other WPF/Silverlight approaches.  1.  A good mechanism for deciphering when the user is manipulating the content within the panorama control and the panorama itself.   In other words, being able to accurately determine what is a flick and what is click. 2.  Dynamically Sizing the panorama control based on the width of its content.  Right now each control panel is 400px, ideally the Panel items would be measured and then panorama control would update its size accordingly.  3.  Background and content wrapping.  The WP7 UX guidelines specify that the content and background should wrap at the end of the list.  In my code I restrict the drag at the ends of the list (like the iPhone).  It would be interesting to see how this would effect the scroll experience.     Well, Its been fun building this control and if you use it Id love to know what you think.  You can download the Source HERE or from the Expression Gallery  Erik Klimczak  | [email protected] | twitter.com/eklimczDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Never Call Me at Work [Humorous Star Wars Video]

    - by Asian Angel
    Have you ever had one of those days when someone close to you calls at the worst possible time? See what happens when this stormtrooper’s wife calls him while he is at work above Tatooine! Needless to say Darth Vader is in a “less than forgiving” mood… Never Call Me At Work [YouTube] Latest Features How-To Geek ETC How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Never Call Me at Work [Humorous Star Wars Video] Add an Image Properties Listing to the Context Menu in Chrome and Iron Add an Easy to View Notification Badge to Tabs in Firefox SpellBook Parks Bookmarklets in Chrome’s Context Menu Drag2Up Brings Multi-Source Drag and Drop Uploading to Firefox Enchanted Swing in the Forest Wallpaper

    Read the article

  • Oracle Business Intelligence integration with Oracle Open Office

    - by Harald Behnke
    A highlight of the latest Oracle Office product launches are the first Oracle application connectors introduced with Oracle Open Office 3.3. The Oracle Open Office Connector for Oracle Business Intelligence perfectly demonstrates the advantages of enterprise and office productivity software engineered to work together. The connector enables you to access and run Oracle Business Intelligence Enterprise Edition requests directly within Oracle Open Office. The refreshable requests leverage not only native Open Office functionality but also the scalability and performance of the Oracle Oracle Business Intelligence server (R10.x). The requests reference a single source of information as defined in the Oracle Business Intelligence server data thus ensuring consistent information across the enterprise. See how it works in the demo video: Beyond the dramatic license cost savings for Oracle Business Intelligence customers using Oracle Open Office, the joint engineering efforts result in usability and efficiency benefits not available with Microsoft Office: Import styles and conditional formats defined in Business Intelligence answersApply customized styles, direct or conditional formats to Oracle Business Intelligence data - all changes are preserved during refreshChange chart properties for Oracle Open Office charts - all changes are preserved during refresh Read more about the Oracle Open Office enterprise features.

    Read the article

  • Novell est bien le propriétaire d'UNIX, SCO perd son procès

    Mise à jour du 31.03.2010 par Katleen Novell est bien le propriétaire d'UNIX, SCO perd son procès Un verdict très attendu dans le monde de l'informatique vient de tomber, après plusieurs années de procès. Du côté de l'open source, on retenait son souffle : la décision a être annoncée pouvait tout changer. Et c'est finalement le soulagement général : UNIX n'appartient pas à SCO. Le tribunal de Salt Lake City, dans l'Utah, vient de reconnaitre officiellement Novell comme propriétaire légitime d'UNIX. Les développeurs et éditeurs de distributions UNIX et Linux sont donc rassurés : tout est bien qui finit bien. Linux menacé de mort par...

    Read the article

  • how to evaluate own project

    - by gruszczy
    I am working on a open source project in pure C, that I have started some time ago, but only recently found time to add some features. I can clearly some weaknesses of my old design, so I am trying to refactor my old code. I have no idea however, how to evaluate properly my new code. Do you know about any techniques or tools for code evaluation? I am pretty good with object oriented design, but for about three years I had no contact with purely structural one. Therefore I don't have enough experience, to be able to discern between good and bad design choices.

    Read the article

  • O&rsquo;Reilly Deal of the Day 6/August/2014 - Professional C# 5.0 and .NET 4.5.1

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2014/08/06/orsquoreilly-deal-of-the-day-6august2014---professional-c-5.0.aspxToday’s half-price deal from O’Reilly at http://shop.oreilly.com/product/9781118833032.do?code=MSDEAL, is Professional C# 5.0 and .NET 4.5.1. “Written by a dream team of .NET experts, Professional C# 5.0 and .NET 4.5.1 includes everything developers need to work with C#, the language of choice for .NET applications. This book is perfect for both experienced C# programmers looking to sharpen their skills and professional developers who are using C# for the first time. The authors deliver unparalleled coverage of Visual Studio 2013 and .NET Framework 4.5.1 additions, as well as new test-driven development and concurrent programming features. Source code for all the examples are available for download, so you can start writing Windows desktop, Windows Store apps, and ASP.NET web applications immediately.”

    Read the article

  • Simple Excel Export with EPPlus

    - by Jesse Taber
    Originally posted on: http://geekswithblogs.net/GruffCode/archive/2013/10/30/simple-excel-export-with-epplus.aspxAnyone I’ve ever met who works with an application that sits in front of a lot of data loves it when they can get that data exported to an Excel file for them to mess around with offline. As both developer and end user of a little website project that I’ve been working on, I found myself wanting to be able to get a bunch of the data that the application was collecting into an Excel file. The great thing about being both an end user and a developer on a project is that you can build the features that you really want! While putting this feature together I came across the fantastic EPPlus library. This library is certainly very well known and popular, but I was so impressed with it that I thought it was worth a quick blog post. This library is extremely powerful; it lets you create and manipulate Excel 2007/2010 spreadsheets in .NET code with a high degree of flexibility. My only gripe with the project is that they are not touting how insanely easy it is to build a basic Excel workbook from a simple data source. If I were running this project the approach I’m about to demonstrate in this post would be front and center on the landing page for the project because it shows how easy it really is to get started and serves as a good way to ease yourself in to some of the more advanced features. The website in question uses RavenDB, which means that we’re dealing with POCOs to model the data throughout all layers of the application. I love working like this so when it came time to figure out how to export some of this data to an Excel spreadsheet I wanted to find a way to take an IEnumerable<T> and just have it dumped to Excel with each item in the collection being modeled as a single row in the Excel worksheet. Consider the following class: public class Employee { public int Id { get; set; } public string Name { get; set; } public decimal HourlyRate { get; set; } public DateTime HireDate { get; set; } } Now let’s say we have a collection of these represented as an IEnumerable<Employee> and we want to be able to output it to an Excel file for offline querying/manipulation. As it turns out, this is dead simple to do with EPPlus. Have a look: public void ExportToExcel(IEnumerable<Employee> employees, FileInfo targetFile) { using (var excelFile = new ExcelPackage(targetFile)) { var worksheet = excelFile.Workbook.Worksheets.Add("Sheet1"); worksheet.Cells["A1"].LoadFromCollection(Collection: employees, PrintHeaders: true); excelFile.Save(); } } That’s it. Let’s break down what’s going on here: Create a ExcelPackage to model the workbook (Excel file). Note that the ‘targetFile’ value here is a FileInfo object representing the location on disk where I want the file to be saved. Create a worksheet within the workbook. Get a reference to the top-leftmost cell (addressed as A1) and invoke the ‘LoadFromCollection’ method, passing it our collection of Employee objects. Behind the scenes this is reflecting over the properties of the type provided and pulling out any public members to become columns in the resulting Excel output. The ‘PrintHeaders’ parameter tells EPPlus to grab the name of the property and put it in the first row. Save the Excel file All of the heavy lifting here is being done by the ‘LoadFromCollection’ method, and that’s a good thing. Now, this was really easy to do, but it has some limitations. Using this approach you get a very plain, un-styled Excel worksheet. The column widths are all set to the default. The number format for all cells is ‘General’ (which proves particularly interesting if you have a DateTime property in your data source). I’m a “no frills” guy, so I wasn’t bothered at all by trading off simplicity for style and formatting. That said, EPPlus has tons of samples that you can download that illustrate how to apply styles and formatting to cells and a ton of other advanced features that are way beyond the scope of this post.

    Read the article

  • Windows Server 2008 DHCP with RRAS

    - by Guillermo Prandi
    I have a Windows Server 2008 R2 which is a member of a domain, but is placed in a remote location. The server is directly connected to Internet. Clients need to access a particular insecure TCP service in this server (ports 9730 and 9731). Since clients have dynamic IP addresses I cannot know in advance, I thought it would be nice to have them connected through a VPN in order to access the insecure service, but ONLY to access that service, like this: Client ------> VPN TUNNEL ------> (Insecure service at Server) | \----> (Normal internet access) I'd enable the insecure ports in the firewall only from VPN accesses. For this I configured RRAS in the server and gave it a static IP address range (172.19.1.2 through 172.19.1.254) to serve the clients. First I thought I could use DHCP to assign the addresses, but I cannot use DHCP in my LAN connection (not allowed by the hosting service). I tried configuring DHCP binding it to a Microsoft Loopback Adapter, but that's not supported as a DHCP source by RRAS. What I want to accomplish is to send specific DHCP options to the client (network mask, routing table, etc.). In particular: Prevent the client from having the server as default router (without changing the client's "use default gateway in remote network"). Have it as a route for the server's internal RRAS address only (172.19.1.1). Prevent the client from using a 255.255.0.0 mask for the 172.19.x.x network (a 255.255.255.0 mask would be better). Can I do that with RRAS only? How? Currently, the only solution I can think of is to use DHCP in the LAN adapter, but filter DHCP packets so they don't reach the provider's network. However, I'm not sure if that will work. Any suggestions are welcomed! Guille

    Read the article

  • How to use gps receiver bu-353

    - by Parimal
    Hi I have a gps receiver bu-353 with usb interface i want to know how can i use it under ubuntu I ran the following command gpsd -n -N -D 2 /dev/ttyUSB0 I got the output as: gpsd: launching (Version 2.94) gpsd: listening on port gpsd gpsd: running with effective group ID 1000 gpsd: running with effective user ID 1000 gpsd: opening GPS data source type 3 at '/dev/ttyUSB0' gpsd: speed 38400, 8N1 gpsd: Garmin: garmin_gps Linux USB module not active. gpsd: speed 9600, 8O1 gpsd: speed 38400, 8N1 gpsd: gpsd_activate(): opened GPS (fd 6) gpsd: speed 4800, 8N1 gpsd: NTPD ntpd_link_activate: 0 gpsd: /dev/ttyUSB0 identified as type SiRF binary (2.687608 sec @ 4800bps) gpsd: detaching 127.0.0.1 (sub 1, fd 8) in detach_client gpsd: detaching 127.0.0.1 (sub 1, fd 8) in detach_client after this i started tangoGPS, which said no gps and no gpsd found

    Read the article

  • Talking JavaOne with Rock Star Martijn Verburg

    - by Janice J. Heiss
    JavaOne Rock Stars, conceived in 2005, are the top-rated speakers at each JavaOne Conference. They are awarded by their peers, who, through conference surveys, recognize them for their outstanding sessions and speaking ability. Over the years many of the world’s leading Java developers have been so recognized. Martijn Verburg has, in recent years, established himself as an important mover and shaker in the Java community. His “Diabolical Developer” session at the JavaOne 2011 Conference got people’s attention by identifying some of the worst practices Java developers are prone to engage in. Among other things, he is co-leader and organizer of the thriving London Java User Group (JUG) which has more than 2,500 members, co-represents the London JUG on the Executive Committee of the Java Community Process, and leads the global effort for the Java User Group “Adopt a JSR” and “Adopt OpenJDK” programs. Career highlights include overhauling technology stacks and SDLC practices at Mizuho International, mentoring Oracle on technical community management, and running off shore development teams for AIG. He is currently CTO at jClarity, a start-up focusing on automating optimization for Java/JVM related technologies, and Product Advisor at ZeroTurnaround. He co-authored, with Ben Evans, "The Well-Grounded Java Developer" published by Manning and, as a leading authority on technical team optimization, he is in high demand at major software conferences.Verburg is participating in five sessions, a busy man indeed. Here they are: CON6152 - Modern Software Development Antipatterns (with Ben Evans) UGF10434 - JCP and OpenJDK: Using the JUGs’ “Adopt” Programs in Your Group (with Csaba Toth) BOF4047 - OpenJDK Building and Testing: Case Study—Java User Group OpenJDK Bugathon (with Ben Evans and Cecilia Borg) BOF6283 - 101 Ways to Improve Java: Why Developer Participation Matters (with Bruno Souza and Heather Vancura-Chilson) HOL6500 - Finding and Solving Java Deadlocks (with Heinz Kabutz, Kirk Pepperdine, Ellen Kraffmiller and Henri Tremblay) When I asked Verburg about the biggest mistakes Java developers tend to make, he listed three: A lack of communication -- Software development is far more a social activity than a technical one; most projects fail because of communication issues and social dynamics, not because of a bad technical decision. Sadly, many developers never learn this lesson. No source control -- Developers simply storing code in local filesystems and emailing code in order to integrate Design-driven Design -- The need for some developers to cram every design pattern from the Gang of Four (GoF) book into their source code All of which raises the question: If these practices are so bad, why do developers engage in them? “I've seen a wide gamut of reasons,” said Verburg, who lists them as: * They were never taught at high school/university that their bad habits were harmful.* They weren't mentored in their first professional roles.* They've lost passion for their craft.* They're being deliberately malicious!* They think software development is a technical activity and not a social one.* They think that they'll be able to tidy it up later.A couple of key confusions and misconceptions beset Java developers, according to Verburg. “With Java and the JVM in particular I've seen a couple of trends,” he remarked. “One is that developers think that the JVM is a magic box that will clean up their memory, make their code run fast, as well as make them cups of coffee. The JVM does help in a lot of cases, but bad code can and will still lead to terrible results! The other trend is to try and force Java (the language) to do something it's not very good at, such as rapid web development. So you get a proliferation of overly complex frameworks, libraries and techniques trying to get around the fact that Java is a monolithic, statically typed, compiled, OO environment. It's not a Golden Hammer!”I asked him about the keys to running a good Java User Group. “You need to have a ‘Why,’” he observed. “Many user groups know what they do (typically, events) and how they do it (the logistics), but what really drives users to join your group and to stay is to give them a purpose. For example, within the LJC we constantly talk about the ‘Why,’ which in our case is several whys:* Re-ignite the passion that developers have for their craft* Raise the bar of Java developers in London* We want developers to have a voice in deciding the future of Java* We want to inspire the next generation of tech leaders* To bring the disparate tech groups in London together* So we could learn from each other* We believe that the Java ecosystem forms a cornerstone of our society today -- we want to protect that for the futureLooking ahead to Java 8 Verburg expressed excitement about Lambdas. “I cannot wait for Lambdas,” he enthused. “Brian Goetz and his group are doing a great job, especially given some of the backwards compatibility that they have to maintain. It's going to remove a lot of boiler plate and yet maintain readability, plus enable massive scaling.”Check out Martijn Verburg at JavaOne if you get a chance, and, stay tuned for a longer interview yours truly did with Martijn to be publish on otn/java some time after JavaOne. Originally published on blogs.oracle.com/javaone.

    Read the article

  • Talking JavaOne with Rock Star Martijn Verburg

    - by Janice J. Heiss
    JavaOne Rock Stars, conceived in 2005, are the top-rated speakers at each JavaOne Conference. They are awarded by their peers, who, through conference surveys, recognize them for their outstanding sessions and speaking ability. Over the years many of the world’s leading Java developers have been so recognized. Martijn Verburg has, in recent years, established himself as an important mover and shaker in the Java community. His “Diabolical Developer” session at the JavaOne 2011 Conference got people’s attention by identifying some of the worst practices Java developers are prone to engage in. Among other things, he is co-leader and organizer of the thriving London Java User Group (JUG) which has more than 2,500 members, co-represents the London JUG on the Executive Committee of the Java Community Process, and leads the global effort for the Java User Group “Adopt a JSR” and “Adopt OpenJDK” programs. Career highlights include overhauling technology stacks and SDLC practices at Mizuho International, mentoring Oracle on technical community management, and running off shore development teams for AIG. He is currently CTO at jClarity, a start-up focusing on automating optimization for Java/JVM related technologies, and Product Advisor at ZeroTurnaround. He co-authored, with Ben Evans, "The Well-Grounded Java Developer" published by Manning and, as a leading authority on technical team optimization, he is in high demand at major software conferences.Verburg is participating in five sessions, a busy man indeed. Here they are: CON6152 - Modern Software Development Antipatterns (with Ben Evans) UGF10434 - JCP and OpenJDK: Using the JUGs’ “Adopt” Programs in Your Group (with Csaba Toth) BOF4047 - OpenJDK Building and Testing: Case Study—Java User Group OpenJDK Bugathon (with Ben Evans and Cecilia Borg) BOF6283 - 101 Ways to Improve Java: Why Developer Participation Matters (with Bruno Souza and Heather Vancura-Chilson) HOL6500 - Finding and Solving Java Deadlocks (with Heinz Kabutz, Kirk Pepperdine, Ellen Kraffmiller and Henri Tremblay) When I asked Verburg about the biggest mistakes Java developers tend to make, he listed three: A lack of communication -- Software development is far more a social activity than a technical one; most projects fail because of communication issues and social dynamics, not because of a bad technical decision. Sadly, many developers never learn this lesson. No source control -- Developers simply storing code in local filesystems and emailing code in order to integrate Design-driven Design -- The need for some developers to cram every design pattern from the Gang of Four (GoF) book into their source code All of which raises the question: If these practices are so bad, why do developers engage in them? “I've seen a wide gamut of reasons,” said Verburg, who lists them as: * They were never taught at high school/university that their bad habits were harmful.* They weren't mentored in their first professional roles.* They've lost passion for their craft.* They're being deliberately malicious!* They think software development is a technical activity and not a social one.* They think that they'll be able to tidy it up later.A couple of key confusions and misconceptions beset Java developers, according to Verburg. “With Java and the JVM in particular I've seen a couple of trends,” he remarked. “One is that developers think that the JVM is a magic box that will clean up their memory, make their code run fast, as well as make them cups of coffee. The JVM does help in a lot of cases, but bad code can and will still lead to terrible results! The other trend is to try and force Java (the language) to do something it's not very good at, such as rapid web development. So you get a proliferation of overly complex frameworks, libraries and techniques trying to get around the fact that Java is a monolithic, statically typed, compiled, OO environment. It's not a Golden Hammer!”I asked him about the keys to running a good Java User Group. “You need to have a ‘Why,’” he observed. “Many user groups know what they do (typically, events) and how they do it (the logistics), but what really drives users to join your group and to stay is to give them a purpose. For example, within the LJC we constantly talk about the ‘Why,’ which in our case is several whys:* Re-ignite the passion that developers have for their craft* Raise the bar of Java developers in London* We want developers to have a voice in deciding the future of Java* We want to inspire the next generation of tech leaders* To bring the disparate tech groups in London together* So we could learn from each other* We believe that the Java ecosystem forms a cornerstone of our society today -- we want to protect that for the futureLooking ahead to Java 8 Verburg expressed excitement about Lambdas. “I cannot wait for Lambdas,” he enthused. “Brian Goetz and his group are doing a great job, especially given some of the backwards compatibility that they have to maintain. It's going to remove a lot of boiler plate and yet maintain readability, plus enable massive scaling.”Check out Martijn Verburg at JavaOne if you get a chance, and, stay tuned for a longer interview yours truly did with Martijn to be publish on otn/java some time after JavaOne.

    Read the article

  • SEO effect of “You are leaving this site” page for outbound links?

    - by Timo Huovinen
    The problem I am working on an aggregation website that collects reviews about specific products from various websites. The site has many thousands of outbound links (with "nofollow" attributes) to the content source websites where the reviews were collected from. The site has far more outbound links than inbound links and I have read that this is bad for SEO. The question Would adding an intermediate «You are leaving this site» disclaimer/warning page like this hurt search engine rankings? And can you provide any links about this topic? p.s. The exit page would be a POST form instead of a script, that notifies the user that he/she is leaving this site and provides a button to continue to the other website. p.p.s This kind of idea is implemented on many forums, aggregation websites with the purpose of warning the user that he/she is leaving this site and to block search engine bots from following those links because search bots do not submit forms.

    Read the article

  • Building InstallShield based Installers using Team Build 2010

    - by jehan
    Last few weeks, I have been working on Application Packaging stuff using all the widely used tools like InstallShield, WISE, WiX and Visual Studio Installer. So, I thought it would be good to post about how to Build the Installers developed using these tools with Team Build 2010. This post will focus on how to build the InstallShield generated packages using Team Build 2010. For the release of VS2010, Microsoft has partnered with Flexera who are the makers of InstallShield to create InstallShield Limited Edition, especially for the customers of Visual Studio. First Microsoft planned to release WiX (Windows Installer Xml) with VS2010, but later Microsoft dropped  WiX from VS2010 due to reasons which are best known to them and partnered with InstallShield for Limited Edition. It disappointed lot of people because InstallShield Limited Edition provides only few features of InstallShield and it may not feasable to build complex installer packages using this and it also requires License, where as WiX is an open source with no license costs and it has proved efficient in building most complex packages. Only the last three features are available in InstallShield Limited Edition from the total features offered by InstallShield as shown in below list.                                                                                            Feature Limited Edition for Visual Studio 2010 Standalone Build System Maintain a clean build machine by using only the part of InstallShield that compiles the installations. InstallShield Best Practices Validation Suite Avoid common installation issues. Try and Die Functionality RCreate a fully functional trial version of your product. InstallShield Repackager Create Windows Installer setups from any legacy installation. Multilingual Support Present installation text in up to 35 languages. Microsoft App-V™ Support Deploy your applications as App-V virtual packages that run without conflict. Industry-Standard InstallScript Achieve maximum flexibility in your installations. Dialog Editor Modify the layout of existing end-user dialogs, create new custom dialogs, and more. Patch Creation Build updates and patches for your products. Setup Prerequisite Editor Easily control prerequisite restart behavior and source locations. String Editor View Control the localizable text strings displayed at run time with this spreadsheet-like table. Text File Changes View Configure search-and-replace actions for content in text files to be modified at run time. Virtual Machine Detection Block your installations from running on virtual machines. Unicode Support Improve multi-language installation development. Support for 64-Bit COM Extraction Extract COM data from a 64-bit COM server. Windows Installer Installation Chaining Add MSI packages to your main installation and chain them together. XML Support Save time by quickly testing XML configuration changes to installation projects. Billboard Support for Custom Branding Display Adobe Flash billboards and other graphic files during the install process. SaaS Support (IIS 7 and SSL Technologies) Easily deploy Windows-based Web applications. Project Assistant Jumpstart a project by using a simplified set of views. Support for Digital Signatures Save time by digitally signing all your files at build time. Easily Run Custom Actions Schedule a custom action to run at precisely the right moment in your installation. Installation Prerequisites Check for and install prerequisites before your installation is executed. To create a InstallShield project in Visual Studio and Build it using Team Build 2010, first you have to add the InstallShield Project template  to your Solution file. If you want to use InstallShield Limited edition you can add it from FileàNewà project àother Project Types àSetup and Deploymentà InstallShield LE and if you are using other versions of InstallShield, then you have to add it from  from FileàNewà project àInstallShield Projects. Here, I’m using  InstallShield 2011 Premier edition as I already have it Installed. I have created a simple package for TailSpin Application which has a Feature called Web, few components and a IIS Web Site for  TailSpin application.   Before started working on this, I thought I may need to build the package by calling invoke process activity in build process template or have to create a new custom activity. But, it got build without any changes to build process template. But, it was failing with below error message. C:\Program Files (x86)\MSBuild\InstallShield\2011\InstallShield.targets (68): The "InstallShield.Tasks.InstallShield" task could not be loaded from the assembly C:\Program Files (x86)\MSBuild\InstallShield\2010Limited\InstallShield.Tasks.dll. Could not load file or assembly 'file:///C:\Program Files(x86)\MSBuild\InstallShield\2011\InstallShield.Tasks.dll' or one of its dependencies. An attempt was made to load a program with an incorrect format. Confirm that the <UsingTask> declaration is correct, that the assembly and all its dependencies are available, and that the task contains a public class that implements Microsoft.Build.Framework.ITask. This error is due to 64-bit build machine which I’m using. This issue will be replicable if you are queuing a build on a 64-bit build machine. To avoid this you have to ensure that you configured the build definition for your InstallShield project to load the InstallShield.Tasks.dll file (which is a 32-bit file); otherwise, you will encounter this build error informing you that the InstallShield.Tasks.dll file could not be loaded. To select the 32-bit version of MSBuild, click the Process tab of your build definition in Team Explorer. Then, under the Advanced node, find the MSBuild Platform setting, and select x86. Note that if you are using a 32-bit build machine, you can select either Auto or x86 for the MSBuild Platform setting.  Once I did above changes, the build got successful.

    Read the article

  • Sharing code in LGPL and proprietary software

    - by Martin
    Hi I'm working on a piece of software that'll be released as a dll under LGPL. The software interfaces with hardware from a small company that has provided me with the needed libraries and some code to use them correctly (not only headers but its all in a separate file). As far as i know, the same code is used in their proprietary software that they don't intend to open source but they'd be fine releasing the piece of code they've given me. Now here's the question: What license could be used on the code I got from the company? I guess using GPL or LGPL would make them violate GPL when using the same code in their other software. Is MIT a good idea? Is it ok to just include a file with MIT license on it in my otherwise LGPL:ed project? Since I'm not the copyright holder, I'd have to ask the company to apply the license obviously but that shouldn't be a problem. Thanks /Martin

    Read the article

  • Big Data Accelerator

    - by Jean-Pierre Dijcks
    For everyone who does not regularly listen to earnings calls, Oracle's Q4 call was interesting (as it mostly is). One of the announcements in the call was the Big Data Accelerator from Oracle (Seeking Alpha link here - slightly tweaked for correctness shown below):  "The big data accelerator includes some of the standard open source software, HDFS, the file system and a number of other pieces, but also some Oracle components that we think can dramatically speed up the entire map-reduce process. And will be particularly attractive to Java programmers [...]. There are some interesting applications they do, ETL is one. Log processing is another. We're going to have a lot of those features, functions and pre-built applications in our big data accelerator."  Not much else we can say right now, more on this (and Big Data in general) at Openworld!

    Read the article

  • Vizioz is back on the web

    - by Vizioz Limited
    I founded Vizioz in 1996 as a website development business. Since then Vizioz has come in and out of focus, it is time to start building Vizioz into a website development consultancy. Over the following two months we will be launching our new website where we will be promoting our ASP.NET, C#, XHTML, CSS, XSLT, SQL, Umbraco Development, Wordpress Development and Graphic Design services, and of course our website will be powered by the open source content management system called Umbraco CMS which we have used for 10+ client sites in the last twelve months.I will be using this new blog to talk about client projects we are currently working on and any Umbraco development related bits of code that we feel would be good to release back to the Umbraco community.

    Read the article

  • SQL Server 2008 R2 transactional replication over VPN

    - by enashnash
    I'm having difficulty setting up replication over a VPN. I have a SQL Server 2008 R2, Enterprise Edition database on a Windows 2008 R2 Server. SQL Server is running on a non-standard port. I have set it up so that it is acting as its own distributor and have configured a publisher on this server. It is set as an updatable transational publication (yes, this is necessary). On this server, I have Routing and Remote Access enabled in order to be able to establish VPN connections. It is configured with a static IP address pool, of which the first in the range is always assigned to the server. I have assigned a test user a static address within this range (I don't know if this is necessary or not). All clients will be 2008 R2 versions, but could be SQL Express or standalone developer instances of the full product. I can establish a VPN connection from the client without problems and can see that the correct IP addresses are allocated. After connecting to the database to test that I can establish a connection, I realised that I needed to be able to connect to the database using the server name rather than an IP address - required for replication - which wouldn't work initially. I created an entry in the hosts file for the server on the client using the NETBIOS name of the server, and now I can connect to the server, from the client, using the SERVER\INSTANCE, PORT syntax, over the VPN. As it is the default instance on the server, I can also connect with simply SERVER, PORT syntax. After all that, I still get the following dreaded error: SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'SERVER\INSTANCE'. (Replication.Utilities). What have I missed? How do I get this to work? TIA

    Read the article

  • Solaris 10 invalid ARP requests from 0.0.0.0?

    - by JWD
    The guys at the data center where I'm hosting a server running Solaris 10 are telling me that my server is making a lot of invalid arp requests. This is an example of a portion of what was sent to me from the logs (with Mac addresses and IP addresses changed). xxxx:xxxx:xxxx/0.0.0.0/0000.0000.0000/[myipaddress]/[Datestamp]) I don't see anything in the arp tables (arp -a) or routing tables (netstat -r) and I don't see anything relating to 0.0.0.0 when snoping the arp requests. The only place I see any reference to 0.0.0.0 is if I do netstat -a for the SCTP SCTP: Local Address Remote Address Swind Send-Q Rwind Recv-Q StrsI/O State ------------------------------- ------------------------------- ------ ------ ------ ------ ------- ----------- 0.0.0.0 0.0.0.0 0 0 102400 0 32/32 CLOSED But not really sure what that means. Doesn't seem like I can disable SCTP. Does anyone have any idea what might be causing this and how to stop it? I think the switch I'm connected to doesn't like it and momentarily drops the connection. Is there anyway to at least block those requests using ipfilter or something else?

    Read the article

< Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >