Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 479/1359 | < Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >

• lvm disappeared after disc replacement on raid10

  - by user142295

  here my problem: I am running ubuntu 12.04 on a raid10 (4 disks), on top of which I installed an lvm with two volume groups (one for /, one for /home). The layout of the disks are as follows: Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003f3b6 Device Boot Start End Blocks Id System /dev/sda1 * 63 481949 240943+ 83 Linux /dev/sda2 481950 2910640634 1455079342+ fd Linux raid autodetect /dev/sda3 2910640635 2930272064 9815715 82 Linux swap / Solaris Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00069785 Device Boot Start End Blocks Id System /dev/sdb1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdb2 2910158685 2930272064 10056690 82 Linux swap / Solaris Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdc2 2910158685 2930272064 10056690 82 Linux swap / Solaris Disk /dev/sdd: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f14de Device Boot Start End Blocks Id System /dev/sdd1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdd2 2910158685 2930272064 10056690 82 Linux swap / Solaris The first disk (/dev/sda) contains the /boot partition on /dev/sda1. I use grub2 to boot the system off this partition. On top of this raid10 I installed two volume groups, one for /, one for /home. This system worked well, I even exchanged two disks during the last two years. It always worked. But not this time. For the first time, /dev/sda broke. I do not know if this is an issue – I know I would have struggled anyways to overcome the problem with /boot installed on that disk and grub2 installed on the mbr of /dev/sda. Anyways, I did what I always did: start knoppix fire up the raid sudo mdadm --examine -scan which returns ARRAY /dev/md127 UUID=0dbf4558:1a943464:132783e8:19cdff95 start it up sudo mdadm --assemble /dev/md127 fail the failing disk (smart event) sudo mdadm /dev/md127 --fail /dev/sda2 remove the failing disk sudo mdadm /dev/md127 --remove /dev/sda2 stop the raid sudo mdadm -S /dev/md127 take out the disk replace it with a new one create the same partitions as on the failling one add it to the raid sudo mdadm --assemble /dev/md127 sudo mdadm /dev/md127 --add /dev/sda2 wait 4 hours All looks fine: cat /proc/mdstat returns: Personalities : [raid10] md127 : active raid10 sda2[0] sdd1[3] sdc1[2] sdb1[1] 2910158464 blocks 64K chunks 2 near-copies [4/4] [UUUU] unused devices: <none> and sudo mdadm --detail /dev/md127 returns /dev/md127: Version : 0.90 Creation Time : Wed Jun 10 13:08:46 2009 Raid Level : raid10 Array Size : 2910158464 (2775.34 GiB 2980.00 GB) Used Dev Size : 1455079232 (1387.67 GiB 1490.00 GB) Raid Devices : 4 Total Devices : 4 Preferred Minor : 127 Persistence : Superblock is persistent Update Time : Thu Mar 21 16:27:40 2013 State : clean Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : near=2 Chunk Size : 64K UUID : 0dbf4558:1a943464:132783e8:19cdff95 (local to host Microknoppix) Events : 0.4824680 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 17 1 active sync /dev/sdb1 2 8 33 2 active sync /dev/sdc1 3 8 49 3 active sync /dev/sdd1 However, there is no trace of the volume groups. Rebooting into knoppix does not help Restarting the old system (I actually replugged and re-added the failing disk for that – the system begins to start, but then fails to see the / partition – no wonder if the volume group is gone) does not help. sudo vgscan, sudo vgdisplay, sudo lvs, sudo lvdisplay, sudo vgscan –mknodes all returned No volume groups found. I am completely at a loss. Can anyone tell me if and how I can recover my data? Thanks in advance!

  Read the article

• Convert each slide to PNG with LibreOffice Impress in terminal with excel graph

  - by Dean

  I need to convert each slide in a powerpoint presentation to a PNG with the command line. I have tried to convert it to a PDF then to individual PNGs but the images haven't exported properly. These images are graphs originally from Microsoft Excel. If I export it as a PNG from within LibreOffice the graph exports properly, but not if I convert it to a PDF first using unoconv or the export tool in LibreOffice Impress. Here is a couple of examples, in impress: As you can see the image works. But when this is exported to PDF it looks like: So whats going wrong? As if its directly exported to PNG in libreoffice it looks exactly as is in the presentation. Also if I convert it to the LibreOffice file format this also happens.

  Read the article

• window title bar and controls (minimize, maximize and close) don't work sometimes

  - by Ravindranath

  I am using Ubuntu 11.10. Sometimes the window controls don't work. If I click on any of the icons on top-right or top-left they just become colorless and fade away, as though that are not present. The window has not frozen, as I can click inside the window and continue to work with it. The moment I click inside the window the titlebar controls regain their color, but when I click them again, they fade and bcm colorless. As a result, I cannot close, minimize or maximize. This is not a continuous problem, but happens very frequently.

  Read the article

• Ubuntu 12.10 overheats HP dv6t

  - by raul

  12.10 in my hp dv6t-6c00 I'm worried about the heat... I followed some advice, and I think that I disabled ATI card, that improved the fan activity and reduced the temperature a little bit. But now fan is starting and stopping all the time, according to the Jupiter applet, temp goes from 45 degrees to 58-59.... (without any load) Should I worry? What can I do to solve this? What is the normal temp?

  Read the article

• Dolphin search bar missing. How can i get it back?

  - by Ike

  A while ago, my search bar went missing in dolphin. If the search toolbar is checked for view/unhide, nothing shows up. I noticed if i check and uncheck the button to hide/unhide it, a small, thin content-less bar slightly pushes the rest of the toolbar up. i tried reconfiguring with dpkg, purging and reinstalling, etc. i left it alone as i thought it would be fixed in an update, but today i upgraded daolphin and it's still gone. any thoughts?

  Read the article

• My LAN USB NIC is not working in ubuntu 11.10?

  - by Gaurav_Java

  Today i start my system its seems that my LAN port is not working . so i buy one USB to LAN adapter and i plug in ubuntu system its doen't connect automatically .when i check result lsusb its shows me that there is one DM9601 Ethernet adapter is connected when i click on network information in panel its shows me that there is something " wired NEtwork (Broadcom NetLink BCM5784M gigabit Ethernet PCIe) I think want some driver for that .i don't have any idea how it can be used ? here output of sudo lspci -nn *00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) 04:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]* sudo lshw -class network *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 00:1f:16:9a:56:98 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 firmware=sb v2.19 latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:f4500000-f450ffff *-network DISABLED description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:22:fa:09:02:00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-17-generic firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:46 memory:f4600000-f4601fff *-network description: Ethernet interface physical id: 4 logical name: eth1 serial: 00:60:6e:00:f1:7d size: 100Mbit/s capacity: 100Mbit/s capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=dm9601 driverversion=22-Aug-2005 duplex=full firmware=Davicom DM9601 USB Ethernet ip=192.168.1.34 link=yes multicast=yes port=MII speed=100Mbit/s I am using Wimax internet connection which i have to connect from browser . at that time my system is not showing that i am connected to any wired connection. but when i connect internet from other system after getting conneted to internet . when i plug again my USB LAN then its shows that you are conneted to wired connetion. here is screenshot for conneting wimax from browser after connecting to internet network connection shows

  Read the article

• How can I have only two specific keyboard layouts in my system without 'us'?

  - by ??O?????

  I want only two keyboard layouts in my system: us altgr-intl (USA International (AltGr dead keys) ) and gr (Greece), so this is what I've selected in System ? Preferences ? Keyboard ? Layouts. However, every time I begin a new Gnome session (reboot, logout/login), the us keyboard layout is automatically inserted at the top of the list. I created a small script called fixlang that ensures the desirable result: layouts='[us altgr-intl,gr]' # tab between us and altgr key=/desktop/gnome/peripherals/keyboard/kbd/layouts active_layouts="$(gconftool -g $key)" if [ "$active_layouts" != "$layouts" -o "$1" == -f ] then gconftool -t l --list-type=str -s $key "$layouts" fi which I run on login. However, this is a kludge. How can I ensure that Gnome does not mess with my keyboard layout selection?

  Read the article

• How do install Ubuntu from a USB stick?

  - by Sophia

  When I go to the boot menu on my computer and select USB stick, the screen goes black and there comes a flickering underline. Like I could write something. But I can't. Whatever I push, nothing happens. Except the PrintScrn/SysRq button. When I push it, mu computer beeps. I get no choose menu. Nothing. I found out the usb stick is in msdos format. So what format should I use and how can I format it? I am not a computer geek who knows everything. I'm just a beginner. And only 16 years old. I've got a new problem. The screen isn't black anymore. Now there comes an error message: SYSLINUX 4.04 CHS 20110518 Copyright (C) 1994-2011 H.Peter Anvin et al ERROR:No configurationfile found No DEFAULT or UI configuration directive found! boot: And when I write something: boot:example Could not find kernel image:example boot: Why does this fail all the time? ps. I'm using Ubuntu Oneiric 11.10.

  Read the article

• Ubuntu server 11.04 recognize only 1 core instead of 4

  - by Kreker

  I searched for other questions and googled a lot but I don't find a solution for solving this problem. Ubuntu Server 11.04 64bit installed on Dell Poweredge with Intel Xeon X5450. He only recognize 1 of the 4 cores I have. Tried to modify the GRUB config but didn't work. IN the machine BIOS I didn't find anything useful. CPU root@darwin:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping : 10 cpu MHz : 2992.180 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 5984.36 clflush size : 64 cache_alignment : 64 address sizes : 38 bits physical, 48 bits virtual power management: GRUB root@darwin:~# cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=2 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="noapic nolapic" #was with acpi=off # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" Complete dmesg Too long, posted on pastebin http://pastebin.com/bsKPBhzu

  Read the article

• Mount drive on remote machine

  - by NikolaiDante

  My current set up is: I have my main machine (Darkseid) upstairs which has a drive with all my films on it, which I don't keep mounted. Downstairs, next to the tv, I have a htpc (Archangel) which has xbmc installed on it, which points to a samba share on the main machine. Everything works fine when the drive is mounted, but is there a script I can write to send a command to the upstairs machine from the downstairs machine to mount the drive to save the walk upstairs? #lazy Both machines are Ubuntu 12.04

  Read the article

• How do I get the Touchpad Settings working on a Dell XPS 13" Ultrabook?

  - by Dennis Wisnia

  Today I got an brand new Dell XPS 13 and I really like it. Wifi/Bluetooth/Brightness works very well. But only the Touchpad makes me insane. Okay, Multitouch is really nice and i love it on my Macbook but... i must click to click. How can I set up that is an "touch" to click? Its makes me insane. click, click, click.. Can I configure it? Update: I checked the proc/devices and got: I: Bus=0011 Vendor=0002 Product=0005 Version=0000 N: Name="ImPS/2 Generic Wheel Mouse" P: Phys=isa0060/serio1/input0 S: Sysfs=/devices/platform/i8042/serio1/input/input11 U: Uniq= H: Handlers=mouse0 event11 B: PROP=0 B: EV=7 B: KEY=70000 0 0 0 0 B: REL=103 Its really bad - and anyone have an Idea that Ubuntu thinks that is an Touchpad??

  Read the article

• Xrandr settings don't stick; bash script fails; Nvidia; disper doesn't work

  - by bcmcfc

  I have an Nvidia graphics card. Yeah, I know. This might have to change soon. I am trying to get the resolution to set correctly on my second monitor, which is a VGA monitor with a native resolution of 1440x900. I have set up this bash script which doesn't work: xrandr --newmode "1440" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync xrandr --addmode -display VGA-1 1440 xrandr --output VGA-1 --mode 1440 It outputs: xrandr: cannot find mode 1440. It has worked previously when running the commands individually but after a restart it fails. I've also just installed disper as per this question but have no idea how to use it - the help suggests the command: disper -d VGA-1 -r "1440x900" should work, but it does not. It just outputs the help text, suggesting something is wrong but not saying what. Is there any way to get these horrific Nvidia drivers working properly with a resolution that is not detected by the tools?

  Read the article

• How do I add English-UK thesaurus in LibreOffice?

  - by Chethan S.

  I have been trying to use English-UK thesaurus in LibreOffice but so far cannot get it to work. I have installed mythes-en-us as only it was available in repos. As suggested in some forums I searched for openoffice.org thesaurus, but again US version was available. As a result I can't enable thesaurus when I choose English UK: As instructed elsewhere I tried this: cd /usr/share/myspell/dicts sudo ln -s th_en_US_v2.dat th_en_GB_v2.dat sudo ln -s th_en_US_v2.idx th_en_GB_v2.idx Still the result is same as shown in above screenshots. What can be done now?

  Read the article

• HP mini 5102 Ethernet does not work after suspend on Lubuntu 12.10

  - by Marcin

  Ethernet works fine after system is rebooted The onboard card is seen in 'lspci' as: 43:00.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Optima 88E8059 [PCIe Gigabit Ethernet Controller with AVB] (rev 11) After system being suspended the sky2 driver loads but does not enable the NIC. I have noticed that it happens when PC is left suspended for longer period of time (few houres) Trying to reproduce it I have tried to load the sky2 driver with 'modprobe sky2'. Unfortunately typing 'ifconfig -a' for the onboard ethernet adapter does not list the driver once the sky2 driver is loaded. I have searched internet and I found some information about a bug in kernel. Hovewer it was reported in 2010 so I hope it has been fixed. Here it is http://lists.opensuse.org/opensuse-bugs/2010-02/msg01473.html

  Read the article

• Ubuntu Server adding a new user

  - by Paul Edwards

  Hi i am new to Ubuntu server and i have been trying to add a new user. I typed in adduser then username and also tried useradd then username but it does seem to add a user but when i login i only get a dollar sign instead of user@servername. I have tried adding rules to allow me into the sudo for that username but i just can't work out why i only get the dollar sign. So would be really grateful if someone could help me with this Thanks....

  Read the article

• I can't click on some things and other problems

  - by Ruben

  I have some issues with my Ubuntu 12.04 . When I open Ubuntu Software Center, the program opens and than just disappears just when it is opened. My Ubuntu 12.04 won't install any updates because of this error in the picture. Worst of all: I can't click on anything except for programs that from Ubuntu: for example I can't browse the internet via Firefox or Chromium... I can't click on folders. I can't click on things in my Thunderbird mail program. But I can click on Update manager for example... It is just clicking that doesn't work, when I try 'clicking' something with using the tab-button and enter I can click on something - in every case. But that's just too annoying to do. Oh sorry guys I had some screenshots that illustrate the problems, but I can't get them off the 'problem pc ubuntu 12.04' about which I am talking... it's so sad

  Read the article

• wireless not connecting in 12.04 update

  - by Julie

  I just updated from 10.04 to 12.04. I am not very knowledgeable at all with Ubuntu since it is still relatively new to me. I went through the whole update today and yesterday and now that it is finished it will not acknowledge that there are any wireless connections around, nor does it give me an option to pick one. it just tells me what ones I've used in the past. is there any way that someone can help me? I have read through and attempted almost every fix that everyone has found and nothing is working and I'm super confused.

  Read the article

• ATI Radeon HD with Catalyst driver stuck mirroring screens

  - by Mike Axiak

  In 11.10 I replaced my aging Nvidia card with a new Radeon HD 6970 card. The single card has two DVI output ports which I've connected to two monitors. I installed Catalyst version 11.9 and I cannot get multiple monitors set up the way I want. I tried: $ sudo amdcccle and setting the mode to single desktop multiple monitors and whenever I do that Unity crashes and I get back to the login screen. Nothing shows up in the Xorg.*.log files for me to post here. There's only one card so I don't think xinerama would be any help here. Anyone have any ideas? EDIT: Here's my xorg.conf file: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "0-DFP3" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "75" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "amdcccle-Device[5]-1" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" BusID "PCI:5:0:0" Screen 1 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[5]-1" Device "amdcccle-Device[5]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Load balancing on Ubuntu Server

  - by SabreWolfy

  I have Ubuntu 10.04.4 server (32-bit) installed on a headless quad-core machine with 2GB RAM. I'm running a command-line analysis which is analyzing a large amount of data, but which does not require a large amount of RAM. The tool does not provide any multi-threading, so the CPU load is sitting at 1.00 (or sometimes just a little over). I ran top and pressed 1 to see the load on each of the cores and noticed that "Cpu1" is always running at 100%. I thought that the load would be distributed between the cores, rather than loading one core all the time. I'm sure I've seen this load-balancing behaviour before in Ubuntu or Debian Desktop versions. Why would the Server edition work differently? The analysis will likely take several hours to run, so loading one core at 100% for many hours while the other 3 remain idle is surely not the best approach?

  Read the article

• I'm trying to install Bruteforce Savedata from the archiver

  - by Jonathan

  I've just installed UBUNTU 12.04 for curiosity purposes. I'm a gamer and I wanted to install Brute force Save data on my comp. So i download it and it open in the Archive manager i go to run the ".exe" but encounter this message Archive: /home/c4/Desktop/Bruteforce_Save_Data_installer.exe [/home/c4/Desktop/Bruteforce_Save_Data_installer.exe] End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. zipinfo: cannot find zipfile directory in one of /home/c4/Desktop/Bruteforce_Save_Data_installer.exe or /home/c4/Desktop/Bruteforce_Save_Data_installer.exe.zip, and cannot find /home/c4/Desktop/Bruteforce_Save_Data_installer.exe.ZIP, period. Please help!

  Read the article

• Internet Timeouts with TP-Link TL-WN821N v2 wireless usb stick

  - by user1622959

  A short time after accessing the internet, the browser/download times out. Before the timeout, the internet works OK briefly; afterwards, the wireless is still connected with a strong signal, but every internet access results in a timeout. When I leave the PC for a while, the internet is back just to timeout again as soon as I start using it. The same happens when I reconnect to the router. Also, when I surf the internet, it takes a couple of minutes until the timeout, but when I download something, it times out in a matter of seconds. The wireless adapter works just fine in Windows and internet via ethernet cable works just fine in Ubuntu. Does anyone have the same problem or knows a solution. I use Ubuntu 12.10 x64. The problem occurs since I installed ubuntu (which was a few days ago). Here some stuff that might be usefull: serus@serus-Ubuntu-PC:~$ lsusb Bus 002 Device 002: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 802.11n [Atheros AR9170] serus@serus-Ubuntu-PC:~$ lsmod Module Size Used by carl9170 82083 0 serus@serus-Ubuntu-PC:~$ modinfo carl9170 filename: /lib/modules/3.5.0-21- generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko alias: arusb_lnx alias: ar9170usb firmware: carl9170-1.fw description: Atheros AR9170 802.11n USB wireless serus@serus-Ubuntu-PC:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"virginmedia0137463" Mode:Managed Frequency:2.462 GHz Access Point: A0:21:B7:F8:29:B6 Bit Rate=240 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:1399 Invalid misc:18 Missed beacon:0 serus@serus-Ubuntu-PC:~$ sudo lshw -C network *-network description: Wireless interface physical id: 1 bus info: usb@2:2 logical name: wlan0 serial: 00:27:19:bb:00:19 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.5.0-21-generic firmware=1.9.4 ip=192.168.0.6 link=yes multicast=yes wireless=IEEE 802.11bgn

  Read the article

• Kernel Panic Troubleshooting For Dummies

  - by iamsid

  I have made Ubuntu my primary OS since 10.04, and I have converted many of my friends and neighbors into Ubuntu users since then. I am the fix-it guy they approach when they encounter problems. The most frantic calls I get are when they encounter an "update-induced kernel panic." (Many human beings are allergic to command-line interfaces and search engines.) What are the step-by-step procedures to resolve an "update-induced kernel panic"?

  Read the article

• Unity won't load in Ubuntu 12.10

  - by Nigel

  I just upgraded Ubuntu last night to 12.10 from 12.04. When I rebooted like it asked, everything seemed fine, except one of my monitors had a white screen, and I could not use it. After some tweaking in the AMD Catalyst center, I got it to work, but now Unity wont load, and the bar up top wont load either. I am in suspicion that it a problem with Compiz, but might be completely wrong. Any tips on getting this to work? I am also kind of new at Linux, but I could open a terminal and get Opera open for web browsing, but it is really choppy and slow.

  Read the article

• Can't install Ubuntu in a HP DV6 Laptop

  - by EApubs

  I just bought an HP DV6 6011tx (link) Laptop... I formated the disk through Windows and prepared for installing Ubuntu... When I insert the live CD, it shows the ubuntu start screen and then everything goes black (no cursor... Just like the screen is switched off (but the system is working)) When i try to install from the USB, it says Live media is not found! Some times it also give a black screen like the CD... Have any idea how to fix this? Thanks

  Read the article

• How to add another OS entry in Wubi grub

  - by Amey Jah

  I am trying to install another linux distro besides ubuntu. However, I want to retain my existing windows based loader. Currently, as per my knowledge, MsDos loads grub which then loads Ubuntu (with loop back trick). Now, I have a new linux distro installed on /dev/sda8 (/boot for new distro) where as /root for that OS is installed on /dev/sda9. I tried following steps 1. Add entry into 40_custom of ubuntu grub 2. update grub But upon booting via that entry, it is not able to load the new OS and shows me blank screen. What could be the problem? Additional data: grub.cfg file of ubuntu menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-fc296be2-8c59-4f21-a3f8-47c38cd0d537' { gfxmode $linux_gfx_mode insmod gzio insmod ntfs set root='hd0,msdos5' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 01CD7BB998DB0870 else search --no-floppy --fs-uuid --set=root 01CD7BB998DB0870 fi loopback loop0 /ubuntu/disks/root.disk set root=(loop0) linux /boot/vmlinuz-3.5.0-19-generic root=UUID=01CD7BB998DB0870 loop=/ubuntu/disks/root.disk ro quiet splash $vt_handoff initrd /boot/initrd.img-3.5.0-19-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-fc296be2-8c59-4f21-a3f8-47c38cd0d537' { menuentry 'Ubuntu, with Linux 3.5.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-advanced-fc296be2-8c59-4f21-a3f8-47c38cd0d537' { gfxmode $linux_gfx_mode insmod gzio insmod ntfs set root='hd0,msdos5' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 01CD7BB998DB0870 else search --no-floppy --fs-uuid --set=root 01CD7BB998DB0870 fi loopback loop0 /ubuntu/disks/root.disk set root=(loop0) echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=01CD7BB998DB0870 loop=/ubuntu/disks/root.disk ro quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-recovery-fc296be2-8c59-4f21-a3f8-47c38cd0d537' { insmod gzio insmod ntfs set root='hd0,msdos5' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 01CD7BB998DB0870 else search --no-floppy --fs-uuid --set=root 01CD7BB998DB0870 fi loopback loop0 /ubuntu/disks/root.disk set root=(loop0) echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=01CD7BB998DB0870 loop=/ubuntu/disks/root.disk ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } } ### END /etc/grub.d/10_lupin ### menuentry 'Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-0f490b6c-e92d-42f0-88e1-0bd3c0d27641'{ load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos8' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8 0f490b6c-e92d-42f0-88e1-0bd3c0d27641 else search --no-floppy --fs-uuid --set=root 0f490b6c-e92d-42f0-88e1-0bd3c0d27641 fi echo 'Loading Linux core repo kernel ...' linux /boot/vmlinuz-linux root=UUID=0f490b6c-e92d-42f0-88e1-0bd3c0d27641 ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initramfs-linux.img } menuentry 'Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-0f490b6c-e92d-42f0-88e1-0bd3c0d27641' { load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos8' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8 0f490b6c-e92d-42f0-88e1-0bd3c0d27641 else search --no-floppy --fs-uuid --set=root 0f490b6c-e92d-42f0-88e1-0bd3c0d27641 fi echo 'Loading Linux core repo kernel ...' linux /boot/vmlinuz-linux root=UUID=0f490b6c-e92d-42f0-88e1-0bd3c0d27641 ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initramfs-linux-fallback.img } lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 931.5G 0 disk +-sda1 8:1 0 39.2M 0 part +-sda2 8:2 0 19.8G 0 part +-sda3 8:3 0 205.1G 0 part +-sda4 8:4 0 1K 0 part +-sda5 8:5 0 333.7G 0 part /host +-sda6 8:6 0 233.4G 0 part +-sda7 8:7 0 100.4G 0 part +-sda8 8:8 0 100M 0 part +-sda9 8:9 0 14.7G 0 part +-sda10 8:10 0 21.4G 0 part +-sda11 8:11 0 3G 0 part sr0 11:0 1 1024M 0 rom loop0 7:0 0 29G 0 loop / blkid /dev/loop0: UUID="fc296be2-8c59-4f21-a3f8-47c38cd0d537" TYPE="ext4" /dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="5450-4444" TYPE="vfat" /dev/sda2: LABEL="RECOVERY" UUID="78C4FAC1C4FA80A4" TYPE="ntfs" /dev/sda3: LABEL="OS" UUID="DACEFCF1CEFCC6B3" TYPE="ntfs" /dev/sda5: UUID="01CD7BB998DB0870" TYPE="ntfs" /dev/sda6: UUID="01CD7BB99CA3F750" TYPE="ntfs" /dev/sda7: LABEL="Windows 8" UUID="01CDBFB52F925F40" TYPE="ntfs" /dev/sda8: UUID="cdbb5770-d29c-401d-850d-ee30a048ca5e" TYPE="ext2" /dev/sda9: UUID="0f490b6c-e92d-42f0-88e1-0bd3c0d27641" TYPE="ext2" /dev/sda10: UUID="2e7682e5-8917-4edc-9bf9-044fea2ad738" TYPE="ext2" /dev/sda11: UUID="6081da70-d622-42b9-b489-309f922b284e" TYPE="swap Any help is appreciated. Please let me know if you need any extra data.

  Read the article

< Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >