Search Results

Search found 14951 results on 599 pages for 'connect by'.

Page 480/599 | < Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >

• Error when connecting to shared Windows Printers

  - by TrueDuality

  I'm replacing our Windows 2003 print server with one running on Windows 2008 R2. I have connected and configured all of our printers and can successfully print to them from the server itself. All of the printers are shared and user's have permission to print on all of them. Whenever one of our clients attempts to connect through the shares they receive the following error message: Operation could not be completed (error 0x0000709). Double check the printer name and make sure that the printer is connected to the network. No messages are generated on the client Event Log nor is anything generated on the server. I have reinstalled the drivers as suggested by a few forum posts I came across and it didn't solve the issue. There are twelve different printer drivers and they are all experiencing this issue so I believe it is unrelated to the driver. I have disabled UAC on both the client and server since that has caused so many headaches before, but it too did not solve this problem. Does anyone have any idea what may be causing this?

  Read the article

• Connecting to IPv6 hosts when mobile and on a Surface?

  - by Cerebrate

  Specifically, at my usual location, I have an IPv6 network which connects to the Internet via a static tunnel set up to Hurricane Electric's tunnel broker ( http://www.tunnelbroker.net/ ). This works essentially perfectly, allowing inbound and outbound connectivity. Now, however, I need to connect back to host(s) on that network over IPv6 from mobile tablet(s); meaning the conditions are such that there is no guarantee or even likelihood of native IPv6 support where it happens to be at any given time, and the IPv4 address of the tablet will change on a fairly regular basis. The native Teredo support, as configured by default, functions well enough to let me ping my target hosts, but appears to have neither the reliability nor the throughput to support anything else; I have been unable to make any actual connections (trying a number of TCP-based protocols) using it. I had considered setting up an independent tunnel for the tablet(s), and using scripts to update the client endpoint IP address when it changes, but since both (a) many of the locations will be behind NAT devices over which I have no control, and (b) the option over which I do have control is an AT&T Unite hotspot which does not offer protocol 41 forwarding or respond to ICMP on its public address, this approach does not seem viable. I am additionally constrained as the mobile tablet(s) in question are Surface RTs, and as such are incapable of running, for example, AICCU client software. What is my best option to pursue to obtain IPv6 connectivity in this scenario?

  Read the article

• If I scp a file through an intermediate server, is the file stored temporarily on the server?

  - by Blacklight Shining

  For the sake of simplicity (I find it easier to remember names than arbitrary letters), I will dispense with letters and use names to refer to the machines in this scenario. Say I have two machines, applejack and pinkie-pie, each on their own separate LANs and not in the same physical location. I also have a server, cadance, with a direct Internet-facing connection. I want to copy a file from applejack to pinkie-pie, so to avoid dealing with port forwarding and such, I set up an ssh tunnel from pinkie-pie to cadance (ssh -R etc cadance). Now I can connect to pinkie-pie from anywhere, by connecting to cadance and specifying an alternate port to use. I can also easily copy files to pinkie-pie with scp -P $that_port $some_file cadance:$some_path. My understanding of how it works is this: A secure connection is made from applejack to cadance I am authenticated to cadance A secure connection is made from applejack to pinkie-pie that spans the existing reverse tunnel and the new connection from step 1. I am authenticated to pinkie-pie Files are copied directly from applejack to pinkie-pie over this connection. Am I correct here? How secure is this approach? If I'm wrong…are files copied this way decrypted at cadance before being passed on to pinkie-pie? Is there a possibility that traces of unencrypted data could remain on cadance?

  Read the article

• Need to get SMTP server on MS Server 2003

  - by Matt Dawdy

  Long story short, client paid networking company to move their website in house. Now I have to figure out how to email out from their website even though they don't have an SMTP server. At least until I install one. Their email is hosted with Gmail right now (the client's domain through Google App for Your Domain). I changed my code to connect as one of their users "[email protected]" and send email. Worked great for about 12 hours. All of a sudden none of the automated emails are going out now, and google is sending the emails back saying that it is a permanent failure and Message Rejected. The link they direct me to, http://mail.google.com/support/bin/answer.py?answer=69585 is telling me that our emails look like spam. They aren't. They are emails we send to out clients about the status of their applications. Seriously, they are NOT spam. So...long story short is out the window, sorry...but I need to get an SMTP server setup inside their domain that I can send emails out of. This thing won't need to receive emails ever, and really only needs 1 email account customercare. What can I do? Will I have to have the networking company open a port in the firewall? Is there one built into Server 2003?

  Read the article

• Configure Cisco Pix 515 with DMZ and no NAT

  - by Rickard

  I hope that someone could shed some light over my situation, as I am fairly new to PIX configurations. I will be getting a new net for my department, which I am going to configure. At my hands, I have a Cisco PIX 515 (not E), a Cisco 2948 switch (and if needed, I can bring up a 2621XM router, but this is my private and not owned by my dept.). The network I will be getting is the following: 10.12.33.0/26 Link net between the ISP routers and my network will be 10.12.32.0/29 where GW is .1 and HSRP roututers are .2 and .3 The ISP has asked me not to NAT the addresses on my side, as they will set it up to give 10.12.33.2 as a one-to-one nat to a public IP. The rest of the IP's will be a many-to-one NAT to another public IP. 10.12.33.2 is supposed to be my server placed on the DMZ, the rest of the IP's will be used for my clients and the AD server (which is currently also acting as a DHCP server in the old network config with another ISP). Now, the question is, how would I best configure this? I mean, am I thinking wrong here, I am expected to put the PIX first from the ISP outlet, then to the switch which will connect my clients. But with the ISP routers being on a different network, how will the firewall forward the packets to the other network, it's a firewall, not a router. I have actually never configured a pix before, and fortunately, this is more like a lab network, not a production network, so if something goes wrong it's not the end of the world, if though annoying. I am not asking for a full configuration from anyone, just some directions, or possibly some links which will give me some hints. Thank you very much!

  Read the article

• OS X Apache giving 503 error for anything in /api directory

  - by WilliamMayor

  I have a locally hosted website that uses Smarty templates, I'm trying to get started on building an API for the site. I've used virtualhost.sh to create a local virtual host for this and other sites. I've discovered that if I put a directory called api at the root of any of these virtual hosts I will get a 503 error when I try to access anything inside. I am using mod-rewrite but so far only to append a .php extension when needed. Here are the error logs for a request: [Thu Feb 09 13:42:37 2012] [error] proxy: HTTP: disabled connection for (localhost) [Thu Feb 09 13:49:06 2012] [error] (61)Connection refused: proxy: HTTP: attempt to connect to [fe80::1]:8080 (localhost) failed [Thu Feb 09 13:49:06 2012] [error] ap_proxy_connect_backend disabling worker for (localhost) The middle line gave me a clue to look in my hosts file because why would a request go to [fe80::1]:8080? I commented out that line and tried again, this time the error was in connecting to the standard 127.0.0.1 localhost. I have concluded that perhaps there is some config file somewhere picking up the underlying request of localhost/api and pointing it somewhere other than my virtual host. At this point my ability to fix the problem fails me. Can anyone help?

  Read the article

• NetApp NDMP backup with BE 2010 R2 works, restore fails

  - by uuwe

  Hi, I'm having some issues with a new Backup Exec 2010 R2 installation. I configured a NetApp FAS2020 as an NDMP device and want to backup files from the NAS to a tape drive connected to my backup server. I set up ndmpd according to this document (http://www.symantec.com/business/support/index?page=content&id=TECH48957) and created a separate backup user (http://filers.blogspot.com/2006/09/setting-veritas-netbackup-with-non.html). Backup works perfectly, but restoring any file gives me an authentication failed error. The NDMP device has a "global" ndmp user configured in the device tab (tried this with the newly created ndmpd backup user and the netapp root) and I can also configure separate resource credentials in the BE restore job. I have tried setting the same accounts for the "global" ndmp device and the restore credentials and have also tried setting different accounts for them. NDMP debug level is at 5 and this is what shows up in /etc/messages. The session is closed immediately after it has been granted. 16:12:07 PST [Java_Thread:info]: ndmpdserver: ndmpd.access allowed for version = 4, sessionId = 51, from src ip = 192.168.11.17, dst ip = FAS2020-1/192.168.11.75, src port = 50857, dst port = 10000 16:12:07 PST [Java_Thread:info]: Ndmpd51: ndmpd session closed successfully for version = 4, sessionId = 51, from src ip = 192.168.11.17, dst ip = FAS2020-1/192.168.11.75, src port = 50857, dst port = 10000 Running wireshark on the backup server doesn't produce much. It shows a SYN - SYN/ACK - NDMP CONNECT_CLOSE Request from the backup server. The Resource Credentials for the restore job behave very oddly. If I enter NDMP credentials and do "Test All" it fails. If I use my regular domain backup account, it is successful. There are no failed or succeeded logons in the NetApp ndmp log and tracing this check shows that it doesn't even connect to the NAS. This makes me think that this is more likely flaky BE behaviour rather than misconfiguration of the NAS. Here is the options ndmp output: FAS2020-1 options ndmp ndmpd.access all ndmpd.authtype challenge ndmpd.connectlog.enabled on ndmpd.enable on ndmpd.ignore_ctime.enabled off ndmpd.offset_map.enable on ndmpd.password_length 16 ndmpd.preferred_interface disable ndmpd.tcpnodelay.enable off

  Read the article

• Dropped connections between Linux Servers in Data Center

  - by Emil H

  I have a number of linux servers at a us-based datacenter. The servers were installed by the hosting company, and are running fedora core. We're experiencing problems with dropped connections. The issue seems to be that when we attempt to connect to one of the other servers after a period of inactivity, the first connection attempt will fail, and sometimes the second. However, after that the connection succeds and it works for a while. This happens for both mysql connections and raw socket connections, but only seems to occur when connecting to some of our servers. The confusing part is that it some of the servers for which we see different behaviors have identical hardware configuration and software. For example, it happens when connecting to a server called mysql2, but not for a server called mysql3. These servers were installed at the same time, but the same specifications. The problem can be reproduced somewhat reliably, but only after waiting fifteen minutes to half an hour. This makes it hard to diagnose, and even harder since I'm not really sure what to look for. I realize that connections sometimes failed, and that we should write our applications to compensate for this but these servers all in the same data center. Why would it matter if two servers haven't communicated for a while? Does anybody have an idea what might be causing this? Is it a server configuration problem or a network problem that I should contact the hosting company about. What do I tell them to look for? Unfortunately our experience has been that the support staff doesn't investigate problems in depth unless we give them detailed directions.

  Read the article

• Cisco VPN endpoints disconnecting from a VLAN

  - by dunxd

  I have a number of Cisco ASA 5505 and PIX 506e around the world acting as VPN endpoints. They connect to a Cisco VPN Concentrator 3000 at HQ. I am using EZVPN to set up the VPN (i.e. most of the config is central on the VPN Concentrator) The majority of endpoints work absolutely fine. However, there are three that do not. 2 ASAs and 1 PIX get disconnected from one of the VLANs on our network. This is the VLAN that my monitoring server runs on - so those endpoints look as if they have gone down. However, I can still ping the endpoints from our user VLAN. If I then SSH onto the endpoint, and do a ping to my monitoring server, the connection comes back. Then after about 10 minutes it stops working again. I've looked at the configuration of my endpoints, and I can't see any significant differences. One common feature is that the affected endpoints are connecting to the internet via retail quality routers. However, I don't see how this could affect traffic within a VPN tunnel. Any ideas or suggestions? I've also got a thread on Cisco's forums at https://supportforums.cisco.com/thread/344638. One other person has reported the same problem.

  Read the article

• make local only daemon listening on different interface (using iptables port forwarding)?

  - by UniIsland

  i have a daemon program which listens on 127.0.0.1:8000. i need to access it when i connect to my box with vpn. so i want it to listen on the ppp0 interface too. i've tried the "ssh -L" method. it works, but i don't think it's the right way to do that, having an extra ssh process running in the background. i tried the "netcat" method. it exits when the connection is closed. so not a valid way for "listening". i also tried several iptables rules. none of them worked. i'm not listing here all the rules i've used. iptables -A FORWARD -j ACCEPT iptables -t nat -A PREROUTING -i ppp+ -p tcp --dport 8000 -j DNAT --to-destination 127.0.0.1:8000 the above ruleset doesn't work. i have net.ipv4.ip_forward set to 1. anyone knows how to redirect traffic from ppp interface to lo? say, listen on "192.168.45.1:8000 (ppp0)" as well as "127.0.0.1:8000 (lo)" there's no need to alter the port. thanx

  Read the article

• Rsync when run in cron doesnt work. Rsync between Mac Os x Server and Linux Centos

  - by Brady

  I have a working rsync setup between Mac OS X Server and Linux Centos when run manually in a terminal. I enter the rsync command, it asks for the password, I enter it and off it goes, runs and completes. Now I know thats working I set out to fully automate it via cron. First off I create an SSH authorized key by running this command on the Mac server: ssh-keygen -t dsa -b 1024 -f /Users/admin/Documents/Backup/rsync-key Entering the password and then confirming it. I then copy the rsync-key.pub file accross to the linux server and place in the rsync user .ssh folder and rename to authorized_keys: /home/philosophy/.ssh/authorized_keys I then make sure that the authorized_keys file is chmod 600 in the folder chmod 700. I then setup a shell script for cron to run: #!/bin/bash RSYNC=/usr/bin/rsync SSH=/usr/bin/ssh KEY=/Users/admin/Documents/Backup/rsync-key RUSER=philosophy RHOST=example.com RPATH=data/ LPATH="/Volumes/G Technology G Speed eS/Backup" $RSYNC -avz --delete --progress -e "$SSH -i $KEY" "$LPATH" $RUSER@$RHOST:$RPATH Then give the shell file execute permissions and then add the following to the crontab using crontab -e: 29 12 * * * /Users/admin/Documents/Backup/backup.sh I check my crontab log file after the above command should run and I get this in the log and nothing else: Feb 21 12:29:00 fileserver /usr/sbin/cron[80598]: (admin) CMD (/Users/admin/Documents/Backup/backup.sh) So I asume everything has run as it should. But when I check the remote server no files have been copied accross. If I run the backup.sh file in a terminal as normal it still prompts for a password but this time its through the Mac Key chain system rather than typing into the console window. With the Mac Key Chain I can set it to save the password so that it doesnt ask for it again but Im sure when run with cron this password isnt picked up. This is where I'm asuming where rsync in cron is failing because it needs a password to connect but I thought the whole idea of making the SSH keys was to prevent the use of a password. Have I missed a step or done something wrong here? Thanks Scott

  Read the article

• VPN being blocked somewhere between either my BT2700HGV and DLink DFL-210

  - by Dom

  Hi, For some time I have been unable to get VPN working through my set up. I have a BT2700HGV Router (2 Wire Model) and as a firewall I have the Dlink DFL-210. You can't turn the firewall completely off on the BT2700HGV so I have it set to DMZplus mode for the Firewall. In theory this should then allow the VPN ports through. On the Firewall I have a series of rules set up and one is the pptp-allow rule which should allow access on the correct ports also. When I try to connect via VPN however the client machine gets an error 809. If I check the log on the Dlink firewall, I see this record: http://dl.dropbox.com/u/1041315/packetdrop.PNG The laptop I am testing the vpn with is connected directly to the BT2700HGV router and I am trying to VPN from it onto 81.138.86.217. I can't work out whether I have some sort of problem in the set up of the rules on my firewall or if the BT router (even though it's in DMZplus mode) is still blocking port 1723. I read somewhere that there where problems because BTs Openzone held onto this port for some reason. Any help would be greatly appreciated. If you need further screen shots or information then please let me know. I wasn't able to create new tags for the router and firewall name or insert the picture in as I am new to the forum. Dom :-)

  Read the article

• Squid proxy in cent os often disconnected with error : tunnelConnectTimeout(): tunnelState->servers is NULL

  - by Ela

  I am having very often internet disconnection problem with Squid proxy service. My server config; OS: CentOS release 6.3 (Final) model name : Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz cpu MHz : 1600.000 My Local systems IP range:192.168.2.x Server IP: 192.168.2.11 Also this server is configured with lamp for development,Samba SMB file service manager and No svn currently. So i see maximum possibility is this squid proxy since this is where it stops to connect and am sure when i restart the server net started working so something wrong with this squid service only. And this server is connected with local 14 other windows machines and basically serves as a central development node. I am able to resolve it by restarting the server fully some time or sometimes by restarting the squid proxy which is totally killing our development. I have attached my cache log file here for the error info. Cache log file Sample error log: 2013/07/01 13:25:38| tunnelConnectTimeout(): tunnelState->servers is NULL 2013/07/01 13:25:41| tunnelConnectTimeout(): tunnelState->servers is NULL 2013/07/01 13:25:41| tunnelConnectTimeout(): tunnelState->servers is NULL 2013/07/01 13:25:50| clientProcessRequest: Invalid Request 2013/07/01 13:26:05| tunnelConnectTimeout(): tunnelState->servers is NULL Some help can make our lives easier, Thanks in advance.

  Read the article

• How do I get netcat to accept connections from outside the LAN?

  - by Chris

  I'm using netcat as a backend to shovel data back and forth for a program I'm making. I tested my program on the local network, and once it worked I thought it would be a matter of simply forwarding a port from my router to have my program work over the internet. Alas! This seems not to be the case. If I start netcat listening on port 6666 with: nc -vv -l -p 6666, then go to 127.0.0.1:6666 in a browser, as expected I see a HTTP GET request come through netcat (and my browser sits waiting in vain). If I go to my.external.ip.address:6666, however, nothing comes through at all and the browser displays 'could not connect to my.external.ip.address:6666'. I know that the port is correctly forwarded, as www.canyouseeme.org says port 6666 is open (and when netcat is not listening, that its closed). If I run netcat with -g my.adslmodem's.local.address to set the gateway address, I get the same behavior. Am I using this command line option correctly? Any insight as to what I'm doing wrong?

  Read the article

• Failed to generate a user instance of SQL Server

  - by Goondocks

  I'm using Windows 7 Beta and trying to install a web application locally. This web site uses Microsoft SQL Server 2005 Express (SQLEXPRESS) and a MDB file in the web site's ~/App_Data folder. I was instructed to configure IIS7 to use Classic .NET AppPool for this web application. Each time the web site loads, I receive the following error: There was an error trying to connect to the Database Server: Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed. The Internet is packed with articles written on this subject. The prevailing wisdom seems to be: Configure the SQL Express Service to use the Local System account. Delete the following directory: C:\Users\username\AppData\Microsoft\Microsoft SQL Server Data\SQLEXPRESS Neither of these fixes have made any impact. I have tinkered with permissions and settings for hours to no avail. Can anyone suggest a fix or help me understand how to get more detailed information about the problem.

  Read the article

• ping/ssh networking problem with server from 1 particular windows xp laptop

  - by user47650

  I am experiencing an odd problem with one specific server at my data centre connecting from my laptop. Basically the server is accessible from other machines in my house, but not from 1 particular laptop which is running windows XP. I have setup tcpdump on the server and wireshark on the laptop, and I can see ping echo request and reply packets that actually make it back to the wireshark on the laptop, but nothing shows in the ping console output like so; $ ping xxx.55.32.255 Pinging xxx.55.32.255 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for xxx.55.32.255: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), But I can see from the wireshark on my local laptop that the ping reply gets back... No. Time Source Destination Protocol Info 46 3.964474 192.168.1.64 xxx.55.32.255 ICMP Echo (ping) request Frame 46 (74 bytes on wire, 74 bytes captured) Ethernet II, Src: Intel_31:d3:01 (00:19:d2:42:c3:01), Dst: ThomsonT_01:b8:2c (00:14:7f:02:b9:3c) Internet Protocol, Src: 192.168.1.64 (192.168.1.64), Dst: xxx.55.32.255 (xxx.55.32.255) Internet Control Message Protocol No. Time Source Destination Protocol Info 48 4.119060 xxx.55.32.255 192.168.1.64 ICMP Echo (ping) reply Frame 48 (74 bytes on wire, 74 bytes captured) Ethernet II, Src: ThomsonT_01:b8:2c (00:14:7f:01:b8:2c), Dst: Intel_21:c3:01 (10:20:d2:31:c3:01) Internet Protocol, Src: xxx.55.32.255 (xxx.55.32.255), Dst: 192.168.1.64 (192.168.1.64) Internet Control Message Protocol obviously I have disabled the windows firewall and there is nothing in the windows event log. There is nothing else obviously strange about the server as it is the same build as other servers that I can connect to fine.

  Read the article

• Set up WLAN in 3-level house

  - by Balint Erdi

  I'm having a hard time setting up the network in our house. It has three levels (basement, ground floor, first level). The WLAN is set up by an ASUS RT-N12 router which provides perfect coverage for the ground floor and the basement. However, I set up my "home office" in the basement where the signal barely arrived. So I purchased a TP-Link TL-WA901ND (300 Mbps) Access Point which I set up in the other corner of the ground floor to expand the ASUS router's range. I used the AP's Repeater mode for that. The distance between my computer and the TP-Link AP is 6-7 meters. There is a staircase going down from the ground floor to the basement so there are no solid walls between the computer and the AP. This setup mostly works (I am writing this from the basement) but it is not reliable (the signal strength sometimes goes down to ~40% of the max) sometimes so I wonder if I am doing it correctly or if there is a better way. Screenshot of the router's and the AP's dashboard screen follow: Any comments on what I am doing wrong or hints for improvement are appreciated. Thank you. UPDATE Tried one more thing, setting up the TP-LINK AP in Access Point mode. That way, I can make it use a different SSID. I enabled WDS/Bridge so that it expands the range of the ASUS router (see screenshot). That does not work, either, if I connect to the network set up by the TP-LINK device (PELSTER-2), I can't reach the external network (the Internet). It seems the problem always comes back to this, the TP-LINK does not have access to the external network, whatever its mode of operation.

  Read the article

• VPN Error 691 but server says authenticated on server

  - by Andy

  Hello all, I have a problem with a vpn connection on Windows XP SP3 that appears to be related to an account (maybe privilleges or an option that I have missed). When connecting using my account, which is a domain administrator account it will connect to through the vpn fine. However, using an account created for another person they receive Error 691: Username or Password is not valid for this domain. On the domain controller (windows 2003) I see a logon successful message: User DOMAIN\user was granted access. Fully-Qualified-User-Name = int.company.net.au/People/Management/User NAS-IP-Address = 10.30.0.3 NAS-Identifier = not present Client-Friendly-Name = MelbourneCore Client-IP-Address = Router-ip Calling-Station-Identifier = not present NAS-Port-Type = Virtual NAS-Port = 77 Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = undetermined Policy-Name = Remote VPN Access Authentication-Type = MS-CHAPv1 EAP-Type = Does anyone have any ideas as to where else I should look for finding a solution? If i use the wrong password it gives a logon failure error in the event viewer. Also removing them from the remote access group gives a logon failure error. Nothing appears in the event viewer on the local machine. In the past all that is required is to add them into our Remote Access Users group. Any help?

  Read the article

• How do I get the F1-F12 keys to switch screens in gnu screen in cygwin when connecting via SSH?

  - by Mikey

  I'm connecting to a desktop running cygwin via SSH from the terminal app in Mac OS X. I have already started screen on the cygwin side and can connect to it over the SSH session. Furthermore, I have the following in the .screenrc file: bindkey -k k1 select 1 # F1 = screen 1 bindkey -k k2 select 2 # F2 = screen 2 bindkey -k k3 select 3 # F3 = screen 3 bindkey -k k4 select 4 # F4 = screen 4 bindkey -k k5 select 5 # F5 = screen 5 bindkey -k k6 select 6 # F6 = screen 6 bindkey -k k7 select 7 # F7 = screen 7 bindkey -k k8 select 8 # F8 = screen 8 bindkey -k k9 select 9 # F9 = screen 9 bindkey -k F1 prev # F11 = prev bindkey -k F2 next # F12 = next However, when I start multiple windows in screen and attempt to switch between them via the function keys, all I get is a beep. I have tried various settings for $TERM (e.g. ansi, cygwin, xterm-color, vt100) and they don't really seem to affect anything. I have verified that the terminal app is in fact sending the escape sequence for the function key that I'm expecting and that my bash shell (running inside screen) is receiving it. For example, for F1, it sends the following (hexdump is a perl script I wrote that takes STDIN in binmode and outputs it as a hexadecimal/ascii dump): % hexdump [press F1 and then hit ^D to terminate input] 00000000: 1b4f50 .OP If things were working correctly, I don't think bash should receive the escape sequence because screen should have caught it and turned it into a command. How do I get the function keys to work?

  Read the article

• Utility to store/cache all web pages and YouTube videos

  - by jonathanconway

  I found myself in the following situation. I'm travelling abroad with my laptop. I connect to a WiFi point and do a bit of browsing and play a YouTube video or two. Then I disconnect and hop on either a plane or taxi. Now I want to go back to some of the webpages I was browsing before and continue reading them, or watch some more of that YouTube video. Unfortunately it seems like none of these resources are cached, or if they are, I have no idea how to access them. Here's what I'd like: A utility that starts when my computer boots and sits in the background, silently caching all the web pages that I view. Not only that, but also the resources such as YouTube videos. Later, when I re-navigate to a site while disconnected, the browser automatically pulls the pages from my cache rather than giving me a 404 error. Or I can click an icon in the system tray and see a list of all the pages/videos in the cache and view any that I like. I'm sure Internet Explorer had a feature like this at some point, like "Offline Mode" or something. But these days it doesn't seem to work. Even when I select that option I still can't view pages that I'm certain I downloaded before. So has the utility I'm talking about been developed yet?

  Read the article

• Every minute incoming, rejected connections to SMTP

  - by joltmode

  I have a feeling my server is being lazily DDoS'ed, though, I have never experienced it before, so, I may be wrong. Every minute, my journal logs the following 3 entries: Nov 05 21:10:47 <host> postfix/smtpd[11220]: connect from webmail.onvoy.com[199.199.18.10] Nov 05 21:10:47 <host> postfix/smtpd[11220]: NOQUEUE: reject: RCPT from webmail.onvoy.com[199.199.18.10]: 454 4.7.1 <tg@<DOMAIN>>: Relay access denied; from=<> to=<tg@<DOMAIN>> proto=ESMTP helo=<webmail.onvoy.com> Nov 05 21:10:47 <host> postfix/smtpd[11220]: disconnect from webmail.onvoy.com[199.199.18.10] Where <host> and <DOMAIN> are hidden. <DOMAIN>, though, is a domain registered with my NS that resolves to my box. How do I get rid of the messages and the related connections?

  Read the article

• Windows 8 - no internet connetction to some hosts while VPN is active

  - by HTD

  I use VPN to access the servers at work. When VPN is used, all network traffic to the Internet passes through my company network. It worked without any problems on Windows 7, now on Windows 8 some sites suddenly became inaccessible. Please note - I don't try to connect them over RDP, they are public Internet addresses, outside company network. They are inaccessible using any protocol. Ping returns "General failure.". I know it could be a misconfiguration on my company's server side, but it's very strange, since the same VPN connection used on Windows 7 works properly. What's wrong? Is it a Windows 8 bug, or is there something I could do on my company servers to make VPN work as expected with Windows 8? My company network works on Windows Server 2008 R2 and uses Microsoft TMG firewall. I couldn't find any rules blocking the traffic to mentioned sites, all network traffic for VPN users are passed through for all IPs and protocols. Any clues? UDPATE: Important - one whole day it worked. I hibernated and restarted the computer, connected and disconnected VPN - nothing could break my connection. Today it broke again, and restarting Windows didn't help. And now the solution: route add -p 0.0.0.0 MASK 255.255.255.255 192.168.1.1 Oh, OK, I know what it did, added my default gateway to routing table. But it still didn't work sometimes. So I removed my main network gateway route with: route delete -p 0.0.0.0 MASK 0.0.0.0 192.168.0.1 And added modified with: route add -p 0.0.0.0 MASK 255.255.255.255 192.168.0.1 And it works. Now. But I don't trust this. I don't know what really happened.

  Read the article

• Java applet class never found

  - by Andrew

  I am having a problem with the java plugins of all three major browsers: chromium, firefox and Internet Explorer. The issue is that applets will always fail to load and yield errors no matter what website or what applet I am trying to use. I can not see any of the example applets on oracle's website; I can not launch the minecraft browser applet; nor can I launch any applet across the web using any browser. I always receive a "class not found:AppletClassHere.class" error. I know that my browser plugin must be working correctly because I can launch the Cisco Nac applet each time I connect to my network and I can launch my own simple applets offline. I am connecting to the internet through a vpn in case that is important. It also seems like a lot of other people I know are having this issue. Re-installing the plugin does not appear to fix the issue. I am asking this question to find out the cause of this problem, and any possible solutions. Thank you.

  Read the article

• Suspected Router problems, [closed]

  - by jordon_user

  I am new to this forum. I appreciate any help you can offer. I have been troubleshooting an error with both my WIRED Internet Connection I have 3 desktops running through this working connection (Router) with no problems. Two computers, one laptop and desktop experience the issue. If I connect directly to the Modem, on either, no problem on the internet. Through the Router, my computer connects for a period of time but if ever awaking my comp, or restarting, the yellow explanation mark returns. The only way I can get the connection up = cmd. ipconfig /release, ipconfig /renew. This constant command is annoying and was hoping for a permanent fix. Audio is also not working. I know its likely a driver error, but its an old comp we put together and if there's an easy fix itd be great to hear from you! If you need any more info just let me know. Thanks! THanks guys!

  Read the article

• GNU screen multiuser mode is broken in OS X 10.6 (Snow Leopard)

  - by schustafa

  I'm using GNU screen for remote pair programming. Let's call the local account for the remote user 'pairpair'. I have the following lines in my .screenrc: multiuser on acladd pairpair I have run sudo chmod u+s /usr/bin/screen. However, when the remote user tries to connect to my screen with the command screen -r [my_account_name]/[pid_of_screen] I receive the following message: Attach attempt with bad pid(xxx) The pid listed in the error message matches the pid of the screen process run by the remote user. The remote user's screen process hangs; my screen session continues happily along after the error message disappears. I've tried using both the built-in screen (at /usr/bin/screen) and the screen available from MacPorts, but I get the same error in both cases. This worked on OS X 10.5 (Leopard). I've googled around for the error message, but most of the hits relate to some BSD bug from 2003 or so (which was fixed). Has anyone else seen this behavior? Does anyone have any idea how to make multiuser support in screen work in SL?

  Read the article

< Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >