Search Results

Search found 15403 results on 617 pages for 'request querystring'.

Page 480/617 | < Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >

• Can I attach a VPN firewall to an existing network and have it manage VPN connections?

  - by jules

  I'm quite new to networking and am trying to set up my first VPN connection. The Situation: I have been contracted for some programming at a facility some distance from my location. I would like to be able to set up a simple VPN connection to their network so that I may make adjustments without significant travel. Their Current Network: Six devices (one I need to connect to) plugged into a basic router (Dlink). This router has an internet connection and a static ip address. My Hopeful (questionable) Proposal: I attach a VPN Firewall I happen to own (Netgear FVS318) as device number seven on the client network. I disable routing / DHCP in the Netgear. I forward the appropriate IPSec ports from the Dlink to the Netgear. I then create a VPN connection on my office Windows 7 machine to the remote network. The request is forwarded from the Dlink to the Netgear where the VPN connection is authenticated. I now have a remote-access connection from my office PC to the client's local network. The Question: Will this proposal work? If not, would another possibility be to attach a computer with a VPN server to the client network? Also, as a note: the client has requested I not replace their router or place mine in-between theirs and the internet :( Thanks very much!

  Read the article

• Ubuntu 12.04 - Pound Reverse Proxy and Adobe Flex/Flash Auth

  - by James

  First time posting, I have a completely fresh install of ubuntu 12.04 Client as a reverse proxy gateway to our internal network. Our setup is we have one external ip but three domains we would like to point to various webservers on our internal network. It's not so much a load balancing issue or cacheing etc. Merely routing some Client browsers to a port 80 webpage (to adhere to some stricter corporate policies regarding placing port numbers after domain names). I have gone with pound and everything seems to be working fine. Static pages load etc. Everything is good with the exception of a Flash/Flex based WebClient for a Digital Asset Management program. The actual static page loads fine, it is just at the moment of entering credentials, be they correct or incorrect, and hitting login, there is no response whatsoever. Either a rejection or confirmation etc. So the request back to the internal server can't be getting through. I have googled extensively and there might be a solution in a crossdomain.xml file? Documentation isn't very clear. And we are not the authors of the DAM app, and have no control over the code on the Flash/Flex side. Questions: Is there a particular config file/solution for pound that allows Flash/Flex auth information to be forwarded? Is there another reverse proxy program (nginx?)that allows this type of config? Am I looking at this the entire wrong way, should Flash/Flex fundamentally not be allowed to have this access?

  Read the article

• SSH dynamic port forwarding, "Connection refused"

  - by crodjer

  I am trying to do dynamic portforwarding using openssh through a remote computer following this command: ssh -D 6789 rohan@<remote_ip> -p <remote_port> This should set up a socks server on my comp as I assume. I am able to use this for normal browsing but can't connect to IRC or remote ssh (through proxychains). I get this error: channel 3: open failed: connect failed: Connection refused A high verbosity level output of the error: $ debug1: Connection to port 6789 forwarding to socks port 0 requested. debug2: fd 9 setting TCP_NODELAY debug2: fd 9 setting O_NONBLOCK debug3: fd 9 is O_NONBLOCK debug1: channel 3: new [dynamic-tcpip] debug2: channel 3: pre_dynamic: have 0 debug2: channel 3: pre_dynamic: have 4 debug2: channel 3: decode socks5 debug2: channel 3: socks5 auth done debug2: channel 3: pre_dynamic: need more debug2: channel 3: pre_dynamic: have 0 debug2: channel 3: pre_dynamic: have 10 debug2: channel 3: decode socks5 debug2: channel 3: socks5 post auth debug2: channel 3: dynamic request: socks5 host 4.2.2.2 port 53 command 1 debug3: Wrote 96 bytes for a total of 3335 channel 3: open failed: connect failed: Connection refused debug2: channel 3: zombie debug2: channel 3: garbage collecting debug1: channel 3: free: direct-tcpip: listening port 6789 for 4.2.2.2 port 53, connect from 127.0.0.1 port 33694, nchannels 4 debug3: channel 3: status: The following connections are open: #2 client-session (t4 r0 i0/0 o0/0 fd 6/7 cfd -1) debug3: channel 3: close_fds r 9 w 9 e -1 c -1 I googled for this too, but couldn't find any solutions.

  Read the article

• How to force certain traffic through GRE tunnel?

  - by wew

  Here's what I do. Server (public internet is 222.x.x.x): echo 'net.ipv4.ip_forward=1' >> /etc/sysctl.conf sysctl -p iptunnel add gre1 mode gre local 222.x.x.x remote 115.x.x.x ttl 255 ip add add 192.168.168.1/30 dev gre1 ip link set gre1 up iptables -t nat -A POSTROUTING -s 192.168.168.0/30 -j SNAT --to-source 222.x.x.x iptables -t nat -A PREROUTING -d 222.x.x.x -j DNAT --to-destination 192.168.168.2 Client (public internet is 115.x.x.x): iptunnel add gre1 mode gre local 115.x.x.x remote 222.x.x.x ttl 255 ip add add 192.168.168.2/30 dev gre1 ip link set gre1 up echo '100 tunnel' >> /etc/iproute2/rt_tables ip rule add from 192.168.168.0/30 table tunnel ip route add default via 192.168.168.1 table tunnel Until here, all seems going right. But then 1st question, how to use GRE tunnel as a default route? Client computer is still using 115.x.x.x interface as default. 2nd question, how to force only ICMP traffic to go through tunnel, and everything else go default interface? I try doing this in client computer: ip rule add fwmark 200 table tunnel iptables -t mangle -A OUTPUT -p udp -j MARK --set-mark 200 But after doing this, my ping program will timeout (if I not doing 2 command above, and using ping -I gre1 ip instead, it will works). Later I want to do something else also, like only UDP port 53 through tunnel, etc. 3rd question, in client computer, I force one mysql program to listen on gre1 interface 192.168.168.2. In client computer, there's also one more public interface (IP 114.x.x.x)... How to forward traffic properly using iptables and route so mysql also respond a request coming from this 114.x.x.x public interface?

  Read the article

• Is my dns server being attacked? And what should I do about it?

  - by Mnebuerquo

  I've been having some intermittent dns problems with a web server, where certain isp's dns servers don't have my hostnames in cache and fail to look them up. At the same time, queries to opendns for those hostnames resolve correctly. It's intermittent, and it always works fine for me, so it's hard to identify the problem when someone reports connectivity problems to my site. In trying to figure this out, I've been looking at my logs to see if there are any errors I should know about. I found thousands of the following messages in my logs, from different ip's, but all requesting similar dns records: May 12 11:42:13 localhost named[26399]: client 94.76.107.2#36141: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:42:13 localhost named[26399]: client 94.76.107.2#29075: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:42:13 localhost named[26399]: client 94.76.107.2#47924: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:42:13 localhost named[26399]: client 94.76.107.2#4727: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:42:14 localhost named[26399]: client 94.76.107.2#16153: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:42:14 localhost named[26399]: client 94.76.107.2#40267: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:43:35 localhost named[26399]: client 82.209.240.241#63507: query (cache) 'burningpianos.com/MX/IN' denied May 12 11:43:35 localhost named[26399]: client 82.209.240.241#63721: query (cache) 'burningpianos.org/MX/IN' denied May 12 11:43:36 localhost named[26399]: client 82.209.240.241#3537: query (cache) 'burningpianos.com/MX/IN' denied I've read of Dan Kaminski's dns cache poisoning vulnerability, and I'm wondering if these log records are an attempt by some evildoer to attack my dns server. There are thousands of records in my logs, all requesting "burningpianos", some for com and some for org, most looking for an mx record. There are requests from multiple ip's, but each ip will request hundreds of times per day. So this smells to me like an attack. What is the defense against this?

  Read the article

• Wireless disconnect randomly with wpa_supplicant reason=2

  - by renenglish

  I installed ubuntu-server 12.04 on my PC , and I use an usb wireless card to join the network. It works ok when I boot up my PC , but the wireless disconnects after a while. I pkill wpa_supplicant and reload the driver rtl8192cu , then it works a again. Then it disconnect again after about a random minutes. Here is the syslog: 22384 May 29 21:49:27 homecenter kernel: [ 6450.459313] wlan1: authenticated 22385 May 29 21:49:27 homecenter kernel: [ 6450.459535] wlan1: associate with f4:ec:38:45:62:74 (try 1) 22386 May 29 21:49:27 homecenter kernel: [ 6450.469080] wlan1: RX AssocResp from f4:ec:38:45:62:74 (capab=0 x431 status=0 aid=3) 22387 May 29 21:49:27 homecenter kernel: [ 6450.469085] wlan1: associated 22388 May 29 21:49:27 homecenter wpa_supplicant[2342]: Associated with f4:ec:38:45:62:74 22389 May 29 21:49:27 homecenter kernel: [ 6450.481933] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready 22390 May 29 21:49:27 homecenter wpa_supplicant[2342]: WPA: Key negotiation completed with f4:ec:38:45:62:7 4 [PTK=CCMP GTK=CCMP] 22391 May 29 21:49:27 homecenter wpa_supplicant[2342]: CTRL-EVENT-CONNECTED - Connection to f4:ec:38:45:62: 74 completed (auth) [id=0 id_str=] 22392 May 29 21:49:38 homecenter kernel: [ 6461.472014] wlan1: no IPv6 routers present 22393 May 29 21:49:38 homecenter ntpdate[2263]: step time server 91.189.94.4 offset 0.012758 sec 22394 May 29 21:49:51 homecenter ntpdate[2404]: step time server 91.189.94.4 offset -0.001190 sec 22395 May 29 21:54:38 homecenter kernel: [ 6762.052030] wlan1: deauthenticated from f4:ec:38:45:62:74 (Reas on: 2) 22396 May 29 21:54:38 homecenter wpa_supplicant[2342]: CTRL-EVENT-DISCONNECTED bssid=f4:ec:38:45:62:74 reas on=2 22397 May 29 21:54:38 homecenter kernel: [ 6762.064744] cfg80211: All devices are disconnected, going to re store regulatory settings 22398 May 29 21:54:38 homecenter kernel: [ 6762.064752] cfg80211: Restoring regulatory settings 22399 May 29 21:54:38 homecenter kernel: [ 6762.064757] cfg80211: Calling CRDA to update world regulatory d omain 22400 May 29 21:54:38 homecenter kernel: [ 6762.069938] cfg80211: Ignoring regulatory request Set by core s ince the driver uses its own custom regulatory domain 22401 May 29 21:54:38 homecenter kernel: [ 6762.069943] cfg80211: World regulatory domain updated: 22402 May 29 21:54:38 homecenter kernel: [ 6762.069945] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 22403 May 29 21:54:38 homecenter kernel: [ 6762.069949] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22404 May 29 21:54:38 homecenter kernel: [ 6762.069952] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22405 May 29 21:54:38 homecenter kernel: [ 6762.069956] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22406 May 29 21:54:38 homecenter kernel: [ 6762.069959] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22407 May 29 21:54:38 homecenter kernel: [ 6762.069962] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KH z), (300 mBi, 2000 mBm)

  Read the article

• Heavy Apache memory usage

  - by Ree

  Recently I've noticed that httpd processes started to consume massive amounts of memory - after some time pretty much using almost all of the 2GB of RAM the server has and I don't have any memory left for other stuff. Here's what top tells me: 26409 apache 15 0 276m 152m 28m S 0 7.4 0:59.12 httpd 26408 apache 15 0 278m 151m 28m S 0 7.4 1:03.80 httpd 26410 apache 15 0 277m 149m 26m S 0 7.3 0:57.22 httpd 26405 apache 15 0 276m 148m 25m S 0 7.3 0:59.20 httpd 26411 apache 16 0 276m 146m 23m S 0 7.2 1:09.18 httpd 17549 apache 15 0 276m 144m 23m S 0 7.0 0:36.34 httpd 22095 apache 15 0 276m 136m 14m S 0 6.6 0:30.56 httpd It seems to me that each httpd process does not free the memory after handling a request. So they all sit at ~270MB which is BAD. Is there a way for me to know where all the memory goes and why it stays that way? I haven't done any server tweaking lately, so I'm sure it's not me who messed something up (haven't had the problem before). The server is used to serve PHP apps. EDIT: Apache is configured with prefork module and MaxRequestsPerChild is set to 4000.

  Read the article

• What characteristic of networking/TCP causes linear relation between TCP activity and latency?

  - by DeLongey

  The core of this problem is that our application uses websockets for real-time interfaces. We are testing our app in a new environment but strangely we're noticing an increasing delay in TCP websocket packets associated with an increase in websocket activity. For example, if one websocket event occurs without any other activity in a 1-minute period, the response from the server is instantaneous. However, if we slowly increase client activity the latency in server response increases with a linear relationship (each packet will take more time to reach the client with more activity). For those wondering this is NOT app-related since our logs show that our server is running and responding to requests in under 100ms as desired. The delay starts once the server processes the request and creates the TCP packet and sends it to the client (and not the other way around). Architecture This new environment runs with a Virtual IP address and uses keepalived on a load balancer to balance the traffic between instances. Two boxes sit behind the balancer and all traffic runs through it. Our host provider manages the balancer and we do not have control over that part of the architecture. Theory Could this somehow be related to something buffering the packets in the new environment? Thanks for your help.

  Read the article

• Emails from web site sometimes blank or gibberish

  - by John Gardeniers

  Our company has one web site with an online store based on osCommerce. The system sends emails for various reasons, such as password changes, order confirmations, etc., using PHP's mail() function. We occasionally have customers report that the email they received is either blank (email is plain text format) or gibberish (email is in HTML format). In the latter case it's really just HTML that's being displayed as raw text but of course the customers can't read it. In this case the first opening tag's <, and sometimes a few more characters, has gone missing. In an attempt to determine whether this was happening only for certain customers or email systems I configured the web site to send a CC of each message to a service account at my end. Those CC'd messages always arrive intact and display correctly in Outlook. For what it's worth, it seems to happen a little more frequently to Hotmail users but is certainly not limited to them. As the web site is on a shared (Debian) host there's precious little I can do about debugging things from that end, although if I made the right request I feel the hosting company staff would help me, even though they have limited resources to spend on such matters. Any suggestions on what else I might do to try and determine just why those emails are not being received correctly by some customers, yet a CC copy arrives just fine?

  Read the article

• Nginx all subdomain points to one subdomain (gitlab) rule

  - by Alkimake

  I have installed gitlab on my server and use nginx as http server... I simply used recipe for gitlab on nginx # GITLAB # Maintainer: @randx # App Version: 3.0 upstream gitlab { server unix:/home/gitlab/gitlab/tmp/sockets/gitlab.socket; } server { listen 192.168.250.81:80; # e.g., listen 192.168.1.1:80; server_name gitlab.xxx.com; # e.g., server_name source.example.com; root /home/gitlab/gitlab/public; # individual nginx logs for this gitlab vhost access_log /var/log/nginx/gitlab_access.log; error_log /var/log/nginx/gitlab_error.log; location / { # serve static files from defined root folder;. # @gitlab is a named location for the upstream fallback, see below try_files $uri $uri/index.html $uri.html @gitlab; } # if a file, which is not found in the root folder is requested, # then the proxy pass the request to the upsteam (gitlab unicorn) location @gitlab { proxy_read_timeout 300; # https://github.com/gitlabhq/gitlabhq/issues/694 proxy_connect_timeout 300; # https://github.com/gitlabhq/gitlabhq/issues/694 proxy_redirect off; proxy_set_header X-Forwarded-Proto $scheme; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_pass http://gitlab; } } gitlab.xxx.com works fine and i get gitlab web documents. But if i want another subdomain i use for Jira (jira.xxx.com) on port 80 (i setup jira on 8080 port normally) gets gitlab web site also. How can i restrict this rule only serving for gitlab, or may be i can redirect jira.xxx.com to jira.xxx.com:8080

  Read the article

• Internal Use Chat/Desktop Platform

  - by Malnizzle

  I did some looking, but I didn't see a SF question directly related to this. I need to find a platform for internal/LAN use only for chat and desktop sharing. We got a lot people having to get up and walk over to another person's office for simple items, and we could save a lot of time collectivity if we had a solution where we had a client app similar to gchat or AIM, where one could right click a name and request a desktop sharing session (to or from). This wouldn't be for product presentation or long training sessions, and wouldn't need more than 2 people in the session. We use GoToMeeting for this. I've looked at TeamViewer, and they got the features I want (plus a lot more features that wouldn't help) and seem more geared to large enterprise support, and it is not exactly cheap. Also looked at OCS some as well, but it seems heavy for what I am trying to do. I don't need anything relating to phone usage. If the general opinion says otherwise, I could talked back into OCS if I am wrong about weight of the product. We use GoToAssist for remote support of clients (which I am a fan of), and I don't it fits here, correct me if I am wrong. All the workstations are XP/7. Thanks!

  Read the article

• access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

  - by Joel Alenchery

  Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely Accessing IP restricted server from dynamic IP which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was Static IP for dynamic IP the first answer seems exactly what I need but I dont know how I would go about doing the same on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

  Read the article

• access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

  - by Joel Alenchery

  Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely http://serverfault.com/questions/187231/accessing-ip-restricted-server-from-dynamic-ip which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was http://serverfault.com/questions/136806/static-ip-for-dynamic-ip the first answer seems exactly what I need but I dont know how I would go about on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

  Read the article

• What can lead to a zone memory exhaustion and how Nginx reacts to it?

  - by Miles Hughes

  What is a possible scenario for exhausting the memory designated to a connection zone with limit_conn_zone directive and what are the implication in this case? Suppose I have this in my configuration: http { limit_conn_zone $binary_remote_addr zone=connzone:1m; ... server { limit_conn connzone 5; which, according to the documentation, allocates 16000 states for connzone on a 64-bit server. It also says that If the storage for a zone is exhausted, the server will return error 503 (Service Temporarily Unavailable) to all further requests. Well, Ok. But what does it mean on practice? When does this happen? Who receives those 503s? Does it mean that if the number of IPs somehow associated with connzone hits 16000 everyone gets a 503 and it's all over? How does Nginx decide? The documentation is weirdly vague on this. So, considering the example config, who would actually get a 503 and under which circumstances and how would things go from there? Same with request zones?

  Read the article

• DHCP forwarding behind access list on a Cisco Catalyst

  - by Ásgeir Bjarnason

  I'm having some trouble with forwarding DHCP from a subnet behind an access list on a Cisco Catalyst 4500 switch. I'm hoping somebody can see the mistake I'm making. The subnet is defined like this: (first three octets of IP addresses and vrf name anonymized) interface Vlan40 ip vrf forwarding vrf_name ip address 10.10.10.126 255.255.255.0 secondary ip address 10.10.10.254 255.255.255.0 ip access-group 100 out ip helper-address 10.10.20.36 no ip redirects I tried turning on a VMWare machine on this subnet that was configured to use DHCP, but I never got a DHCP response and the DHCP server didn't receive a request. I tried putting the following in the access-list: access-list 100 permit udp host 10.10.10.254 host 10.10.20.36 eq bootps access-list 100 permit udp host 10.10.10.254 host 10.10.20.36 eq bootpc access-list 100 permit udp host 10.10.20.36 host 10.10.10.254 eq bootps access-list 100 permit udp host 10.10.20.36 host 10.10.10.254 eq bootpc That didn't help. Can anybody see what the problem is? I know that the DHCP server works; our whole network is running off of this DHCP server I also know that the subnet works because we have active servers running on the network The DHCP scope is already defined on the DHCP server The subnet is correctly defined on the VMWare server (already servers running on the subnet on VMWare) Edit 2012-10-19: This is solved! The subnet had formerly been defined as a /25 network, but was then expanded into a /24 network. When the DHCP scope was altered after this change it was done incorrectly; the gateway was moved to .254, the leasable IP range was in the lower half of the /24 subnet but we forgot to change the CIDR prefix from /25 into /24. This happened some 2 years ago, and we didn't need to use DHCP on this server network again until this week. Thank you MDMarra and Jason Seemann for looking at the question and trying to troubleshoot. Now I'm wondering if I should mark Jason's answer as the accepted answer (I am new to the Stack Exchange network, so I don't know the etiquette of what to do if I misstated the question like in this case).

  Read the article

• Trying to use Nginx try_files to emulate Apache MultiViews

  - by Samuel Bierwagen

  I want a request to http://example.com/foobar to return http://example.com/foobar.jpg. (Or .gif, .html, .whatever) This is trivial to do with Apache MultiViews, and it seems like it would be equally easy in Nginx. This question seems to imply that it'd be easy as try_files $uri $uri/ index.php; in the location block, but that doesn't work. try_files $uri $uri/ =404; doesn't work, nor does try_files $uri =404; or try_files $uri.* =404; Moving it between my location / { block and the regexp which matches images has no effect. Crucially, try_files $uri.jpg =404; does work, but only for .jpg files, and it throws a configuration error if I use more than one try_files rule in a location block! The current server { block: server { listen 80; server_name example.org www.example.org; access_log /var/log/nginx/vhosts.access.log; root /srv/www/vhosts/example; location / { root /srv/www/vhosts/example; } location ~* \.(?:ico|css|js|gif|jpe?g|es|png)$ { expires max; add_header Cache-Control public; try_files $uri =404; } } Nginx version is 1.1.14.

  Read the article

• How to configure Apache to let PHP handle OPTIONS HTTP requests?

  - by Robin Berjon

  In order to set up a proper test suite for CORS (cross-domain requests) I need to be able to handle the HTTP OPTIONS method directly from script. I therefore have a simple PHP script that detects the OPTIONS method, and reacts accordingly by outputting some specific headers. The PHP side is not a problem. If I use curl to issue GET/POST/HEAD/PUT/etc. requests they all go to the script and it clearly handles them fine. If I issue an OPTIONS request however, it never reaches the script: Apache immediately replies listing a set of methods that it believes to be appropriate for this resource. I can tell that the script isn't run (no logging, none of its output makes it to the response, etc.). I've been going through the Apache configuration, have made sure no applicable .htaccess is in the way, I've tweaked a bunch of things such as Limit/LimitExcept directives, but I can't get it to change its behaviour. I've also tried to find information on a technique from my youth that could have helped here: NPH (non-parsed headers) scripts; but apparently that has now disappeared (at least, I can't find any recent information about it that works). So the question is: how do I tweak Apache's configuration so that it will let my script handle OPTIONS?

  Read the article

• How much network latency is "typical" for east - west coast USA?

  - by Jeff Atwood

  At the moment we're trying to decide whether to move our datacenter from the west coast to the east coast. However, I am seeing some disturbing latency numbers from my west coast location to the east coast. Here's a sample result, retrieving a small .png logo file in Google Chrome and using the dev tools to see how long the request takes: West coast to east coast: 215 ms latency, 46 ms transfer time, 261 ms total West coast to west coast: 114 ms latency, 41 ms transfer time, 155 ms total It makes sense that Corvallis, OR is geographically closer to my location in Berkeley, CA so I expect the connection to be a bit faster.. but I'm seeing an increase in latency of +100ms when I perform the same test to the NYC server. That seems .. excessive to me. Particularly since the time spent transferring the actual data only increased 10%, yet the latency increased 100%! That feels... wrong... to me. I found a few links here that were helpful (through Google no less!) ... Does routing distance affect performance significantly? How does geography affect network latency? Latency in Internet connections from Europe to USA ... but nothing authoritative. So, is this normal? It doesn't feel normal. What is the "typical" latency I should expect when moving network packets from the east coast <--> west coast of the USA?

  Read the article

• How do I renew a Web Server certificate in Windows Server 2008?

  - by Mark Seemann

  The SSL certificate for my web site just expired a few days ago, and I would like to renew it. I originally issued it two years ago using my Windows 2008 Certificate Authority, and it's worked without a hitch in all that time, so I would like to renew the certificate as simply as possible to make sure that all the applications relying on that certificate continue to work. I can open an MMC instance and add the Certificates snap-in for the Local Computer. I can find the relevant certificate under Personal, but I can't renew it. When I select Renew certificate with new key I get the following message: Web Server Status: Unavailable The permissions on the certificate template do not allow the current user to enroll for this type of certificate. You do not have permission to request this type of certificate. However, I can't understand this, as I'm logged on as a Domain Admin and I'm running the MMC instance in elevated mode. I've checked the Web Server certificate template, and Domain Admins have the Enroll permission on this template. FWIW, I also tried rebooting the server. How can I renew the certificate?

  Read the article

• Unknown Apache2 + PHP5 FastCGI 500 error .. caused by search engine bots?

  - by rdjurovich

  My Ubuntu server is configured with Apache 2.2.8 and PHP 5.2.4-2ubuntu5.18 in FastCGI mode. Everything works well, except I am seeing 500 errors that only seem to come from bots accessing the server.. for example (access.log): x.125.71.104 - - [16/Nov/2011:10:27:39 +1100] "GET / HTTP/1.1" 500 41377 "-" "Mozilla/5.0 (compatible; Baiduspider/2.0; +http://www.baidu.com/search/spider.html)" x.40.103.239 - - [16/Nov/2011:11:05:56 +1100] "GET / HTTP/1.0" 500 14717 "-" "Mozilla/5.0 (compatible; mon.itor.us - free monitoring service; http://mon.itor.us)" x.249.67.114 - - [14/Nov/2011:20:57:17 +1100] "GET / HTTP/1.1" 500 101 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" x.55.39.85 - - [14/Nov/2011:19:31:06 +1100] "GET / HTTP/1.1" 500 7032 "-" "msnbot/2.0b (+http://search.msn.com/msnbot.htm)._" It is my understanding that a 500 error will be thrown when the PHP process fails to respond to Apache, which could be caused by a fatal PHP error or if PHP runs out of processes.. so my assumption is that either the bots are hitting the server too hard, killing the PHP processes, or something in the request header from bots is causing a fatal error in my PHP script? If anyone can offer advice on this it would be greatly appreciated! Ryan

  Read the article

• where can I find the user in this IIS error 'Login failed for user 'IIS APPOOL\Web2'

  - by Jack

  I encounter the following error: Cannot open database "testbase" requested by the login. The login failed. Login failed for user 'IIS APPPOOL\Web2'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open database "testbase" requested by the login. The login failed. Login failed for user 'IIS APPPOOL\Web2'. So, where can I give this user Web2 permission? (By the way, the server do not have such user Web2 but there is a folder called Web2 located at the wwwroot folder.) I search for answers but all failed as follows: [1] Add the user IUSR to the folder and give it read permission. [2] http://www.codekicks.com/2008/11/cannot-open-database-northwind.html [3] http://blog.sqlauthority.com/2009/08/20/sql-server-fix-error-cannot-open-database-requested-by-the-login-the-login-failed-login-failed-for-user-nt-authoritynetwork-service/

  Read the article

• btrfs: can i create a btrfs file system with data as jbod and metadata mirrored

  - by Yogi

  I am trying to build a home server that will be my NAS/Media server as well a the XBMC front end. I am planning on using Ubuntu with btrfs for the NAS part of it. The current setup consists of 1TB hdd for the OS etc and two 2TB hdd's for data. I plan to have the 2TB hdd's used as JBOD btrfs system in which i can add hdd's as needed later, basically growing the filesystem online. They way I had setup the file system for testing was while installing the OS just have one of the HDD's connected and have btrfs on it mounted as /data. Later on add another hdd to this file system. When the second disk was added btrfs made as RAID 0, with metadata being RAID 1. However, this presents a problem: even if one of the disk fails I loose all my data (mostly media). Also most of the time the server will be running without doing any disk access, i.e. the HDD's can be spun down, when a access request comes in this with the current RAID 0 setup both disks will spin up. in case I manage a JBOD only the disk that has the file needs to be spun up. This should hopefully reduce the MTBF for each disk. So, is there a way in which I can have btrfs setup such that metadata is mirrored but data stays in a JBOD formation? Another question I have is this, I understand that a full drive failure in JBOD will lose data on the drive, but having metadeta mirrored across all drives, will this help the filesytem correct errors that migh creep in (ex bit rot?) and is btrfs capable of doing this.

  Read the article

• How to combine try_files and sendfile on Nginx?

  - by hcalves

  I need Nginx to serve a file relative from document root if it exists, then fallback to an upstream server if it doesn't. This can be accomplished with something like: server { listen 80; server_name localhost; location / { root /var/www/nginx/; try_files $uri @my_upstream; } location @my_upstream { internal; proxy_pass http://127.0.0.1:8000; } } Fair enough. The problem is, my upstream is not serving the contents of URI directly, but instead, returning X-Accel-Redirect with a location relative to document root (it generates this file on-the-fly): % curl -I http://127.0.0.1:8000/animals/kitten.jpg__100x100__crop.jpg HTTP/1.0 200 OK Date: Mon, 26 Nov 2012 20:58:25 GMT Server: WSGIServer/0.1 Python/2.7.2 X-Accel-Redirect: animals/kitten.jpg__100x100__crop.jpg Content-Type: text/html; charset=utf-8 Apparently, this should work. The problem though is that Nginx tries to serve this file from some internal default document root instead of using the one specified in the location block: 2012/11/26 18:44:55 [error] 824#0: *54 open() "/usr/local/Cellar/nginx/1.2.4/htmlanimals/kitten.jpg__100x100__crop.jpg" failed (2: No such file or directory), client: 127.0.0.1, server: localhost, request: "GET /animals/kitten.jpg__100x100__crop.jpg HTTP/1.1", upstream: "http://127.0.0.1:8000/animals/kitten.jpg__100x100__crop.jpg", host: "127.0.0.1:80" How do I force Nginx to serve the file relative to the right document root? According to XSendfile documentation the returned path should be relative, so my upstream is doing the right thing.

  Read the article

• Domain authentication over OPEN wireless pre-logon (Windows 7 Pro) - No logon servers avail

  - by Shadow00Caster

  I have a plethora of laptops that are joined to an AD domain. I have an enterprise wireless system setup, the users of these laptops will be using an OPEN unsecured SSID which will ultimately have a captive portal that uses Radius-AD auth and firewall rules to allow access pre-captive portal auth to the proper ip's/ports of DC's etc for auth etc. I already have other laptops/users connecting to another SSID with 802.11x and SSO, all works perfectly pre-logon etc. My problem is with this open network, for some reason I cannot get the machines to auth to AD. The laptops connect to the wireless network, I confirm this on the controller and can ping the laptop at startup. I sharked the wires on the 2 DC's that these machines auth to, I can see a DNS SOA update from a laptop im testing with and can ping that test laptop from both DC's. When I try to logon, "There are currently no logon servers available to service the logon request." The shark shows no incoming connections to either DC even though the laptop is connected and pingable. Any help is greatly appreciated.

  Read the article

• unable to ping hostname, but \\hostname\\c$ works!?

  - by ciscokid

  I'm having a strange issue on my initial lab setup. Situation: Host with OS Server 2008 R2 64bit, on this host a Virtual Machine in Hyper-V with OS Server 2008 SP1 32bit. The virtual machine has a fixed ip, and is referring to itself for the preferred DNS Server (dns server role has been installed). The host has tcp/ip set to automatic (so automatic ip from router, and dns/gateway = router). Both are able to ping each other on IP address (same ip range). Both are NOT able to ping each other on hostname (sounds logic because virtual machine dns server does not yet have a dns record for the hostmachine). But here's the strange thing: I am able to set up a working network mapping on the Virtual Machine to the host: \hostname\c$. The first thing I thougt was 'something' is blocking the ping request, so I completely disabled Windows Firewall on both Virtual Machine and host. Still pinging on hostname in both ways didn't work, yet I am able to access the network mapping on hostname. There is no extra software installed on both systems (clean windows server 2008).Can someone tell me what is causing this? I always thought: ping on IP address works = network mapping on IP address works. Pinging on hostname doesn't work = network mapping on hostname doesn't work neither. Where am I wrong? Looking forward to your advice!

  Read the article

< Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >