Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 480/750 | < Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >

  • monitor height differences & the mouse going off screen

    - by fastmultiplication
    In ubuntu 10.10 I have a dual monitor setup. I have an nVidia graphics card and am using twinview. One of the monitors is 1024 pixels high and the other is 900. In the monitor configuration screen & in real life, I have them set up side by side, 1024 on the left. The result of this is that when I am on the bottom of the left monitor and move the mouse to the right, it goes into the hidden area below the right monitor's visible area. It seems like it would make a lot more sense for it to be bumped up to the bottom of the right monitor - since one almost never wants to move the mouse into an area of the screen that doesn't show up. And, systems I have used before have been set up that way. How can I set this up? I am not interested in lists of window managers for ubuntu; I would like to know the identity of a particular WM or set of steps I can take to solves the particular problem I have outlined above. Thanks! EDIT: I changed to use two seperate X window monitors, and set them up relatively positioned so that just the corner touches and the mouse can cross there, so the difference in heights doesn't matter.

    Read the article

  • Running a VM off of an external HD via USB

    - by Nelson LaQuet
    Is it viable to run (i.e. reference the vmx/vhd directly from the mounted drive) a VM (vmware running Windows Seven) off of an external HD via USB? I mean, I know it's possible, but I guess I'm asking if USB provides enough bandwidth for normal usage... If so, are there any particular brands that may be better or worse? I know that ESATA would be a more viable setup, but my laptop doesn't have an ESATA port. Currently I use the VM to segregate all of my work development servers and software from my main machine; so I will be running all development servers and tools on the VM directly.

    Read the article

  • Web log files analyzer

    - by Peter Štibraný
    I already use Google Analytics on my page, but I'd like to get additional info from log files. I've looked at various packages during last days, but nothing impressed me so far. Some requirements: must work on log file level (I use apache combined logs, but can configure apache to produce other types of logs) can generate static reports (windows/linux) or use GUI (windows only) should be easy to add custom user agents, and rerun analysis if it can recognize installation of eclipse plugins from log, that would be big plus understands google serp position referer should not require two days to setup (awstats, I am looking at you) should be still under active developement (i.e. analog isn't good answer) preferrably free, or at not very expensive :-) Any good analyzers programs out there?

    Read the article

  • any security tips for my first server? (complete beginner)

    - by Haroldo
    I'm paying for a VPS and hoping to launch my first website on it in the next few days. I'm worried there might be some glaringly obvious security holes in the standard setup, so I'm keen to get some tips About the only thing i know is turn off error reporting in PHP and create users/privilages for MySQL... any more stuff along those lines? I'm using: cpanel and WHM centos 5 php mysql google apps as mail server (so maybe i should disable built in mailer server somehow?!!) This is my first post of Server Fault (i use stack overflow alot), I hope i'm posting this in the right place, with the right tags - please feel free to edit if i'm wrong. Thanks guys!

    Read the article

  • MS-Outlook add-on to move a new message to the same folder as the rest of the thread

    - by Guss
    I'm forced to use MS-Outlook in my job, while I very much like the feature that shows all the messages of a discussion thread (that are stored in different folders) in the inbox when a new message is received for that thread, if the previous messages are in a different data file (which I'm forced to have as the MS-Exchange server quota is very very small) then the message list only shows the name of the data file and not the name of the folder where the messages are stored. As a result, because I file my message by context (i.e. all the emails for project A go into a "Project A" folder, etc), and its important for me to have all the messages in a single thread in the same folder, it is sometimes hard to figure out into which folder should I file the new message. It would be great help if there was some add-on or VBA script that I could add to my setup that will offer a shortcut key or a button to "file this message to the same folder as the previous messages in the conversation thread".

    Read the article

  • How to properly uninstall/reinstall Ubuntu One on Windows XP?

    - by user73303
    I had previously installed an Ubuntu One client as a test on a Windows XP machine. Now I wanted to change the account for the client to a production one but had problems changing the email address so decided to do a reinstall. Ran uninstall. Downloaded ubuntuone-3.0.2-windows-installer.exe. It downloads, goes through the unpacking/install – strangely some of the messages say updating as if it was replacing something that was already there. I do not get the setup/signin screen. There is no ubuntu% processes running. The Program files/ubuntuone directory exists with data and dist folders. The U icon is on the desktop – pointing at ubuntuone/dist/ubuntuone-control-panel-qt.exe but this does not run. Ran uninstall again, deleted Program files/ubuntuone directory, removed any ubuntu entries for registry, rebooted. Downloaded install again - exactly the same as above. How can I uninstall Ubuntu One to get a clean reinstall? Or force the install to continue after downloading/unpacking?

    Read the article

  • Bootable dvd installs ubuntu in one computer but not in other...Why? [closed]

    - by SAM
    Possible Duplicate: My computer boots to a black screen, what options do I have to fix it? I have 2 computers, Windows 7 Intel. On one computer Ubuntu boot-able DVD (AMD 64) works properly. But on other computer the same DVD boots OK but when clicked on "Install Ubuntu" a blank screen with blinking cursor(_) appears and it continues just blinking forever. What problem can be there in computer 2? Can it be DVD reader's problem? (Both computers have LG DVD RW) Can there be any problem in DVD? Computer 1 specs: Pentium D 3 GHz Windows 7 32-bit not a 64bit-capable processor still Ubuntu 64bit trial/installer runs... Computer 2 specs: Core i7 2700k Windows 7 32-bit nvidia gtx 560 graphicsCard ...BIG BOSS... still can't run the setup/trial/disk-check/memory-test ?!?!? Is it the problem of graphics card ?!? I also tried burning other dvd which has the same behavour.... AND yes the dvd name is: ubuntu-12.04.1-dvd-amd64.iso Any help is appreciated.

    Read the article

  • How to use ssh-agent (and graphic passphrase dialog) in Kubuntu 10.10?

    - by halo
    I have recently switched from Ubuntu to kubuntu, both version 10.10. Unfortunately in KDE the ssh passphrase dialog doesn't work out of the box. Everytime my ssh private key is used I need to enter my password. This is neither secure nor comfortable. I have done comprehensive research on the net but only found out dated documentation. Several things I tried didn't work out. Current status: SSH setup working with direct passphrase input ssh-agent running in X session $SSH_AUTH_SOCK set to ssh-agent's socket in X session How to enable ssh-agent for keeping the passphrase in memory for ~15mins and as a bonus always use a graphical dialog for its input? I use asymmetric SSH key pairs for pushing/pulling in Git VCS logging remotely into different server systems

    Read the article

  • Unable to login into CentOS

    - by Rendl
    I had setup a multinode cluster using CentOS with VMware yesterday. Today when I reboot the nodes I get the below error on startup. "there is a problem with the configuration server status 256 centOS" (/usr/libexec/gconf-sanity-check-2 ) I am unable to login as root or any user as the screen is frozen. The solutions online is to change the permissions for some tmp files. My problem is I am unable to access the terminal as I cannot login. Also on reboot I do not have any recovery options in CentOS. I only see command line GRUB. I am new to linux and Hadoop.Pls help asap.

    Read the article

  • LDAP replication breaking referrals

    - by MasterZ
    We have an issue that we believe is caused by ldap replication changing the port of the referal from 686 (secure) to 389 (unsecure). If we setup a new referral everything works, but then as soon as we change someone's password it changes on the master, and then the master replicates and the referral breaks. Any further attempts to modify someone's account give the error "PAM: Cannot connect to LDAP". We used snoop and monitored the firewall to see what was going on. The first password attempt (the one that works) goes over port 686 (as it is supposed to) but every subsequent attempt attempts to use port 389, and therefore fails. We only have 1 referral configured on the client, port 686

    Read the article

  • Is it possible to route *.example.com to a single machine without registering extra domains?

    - by oligofren
    I would like to achieve something similar to what wordpress.com does - giving each user its own subdomain. user1.wordpress.com would in the VirtualHosts setup of Apache would have its DocRoot at /user/user1, for instance. Now, our hosting service provider takes a fee for creating a domain, and in our case this would mean a ridiculous number of domains with a matching price. After some googling on DNS I came over a description of a DNAME record. That seems to fit the bill precisely. Any reason why my service provider would not do this, or why I should not do this?

    Read the article

  • How to use ssh-agent (and graphic passphrase dialog) in Kubuntu 10.10?

    - by halo
    I have recently switched from Ubuntu to kubuntu, both version 10.10. Unfortunately in KDE the ssh passphrase dialog doesn't work out of the box. Everytime my ssh private key is used I need to enter my password. This is neither secure nor comfortable. I have done comprehensive research on the net but only found out dated documentation. Several things I tried didn't work out. Current status: SSH setup working with direct passphrase input ssh-agent running in X session $SSH_AUTH_SOCK set to ssh-agent's socket in X session How to enable ssh-agent for keeping the passphrase in memory for ~15mins and as a bonus always use a graphical dialog for its input? I use asymmetric SSH key pairs for pushing/pulling in Git VCS logging remotely into different server systems

    Read the article

  • Hyper-V and host-installed hardware devices: can guest VMs access?

    - by gravyface
    Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have alot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

    Read the article

  • Delivery Status Notification (Relay) in Exchange Server 2007 with original email attachment

    - by Nick Kavadias
    I have recently setup Exhchange Server 2007. The server is smarthosting outgoing messages. Users have 'request delivery receipt' on by default their 'auditing' purposes in Outlook. They would like the original email attached to the delivery notification as was the case in Exchange Server 2003. I need this same functionality in 2007. The question has been asked here, here and here but cannot find a valid solution. Here's some information about the functionality in Exchange 2003. The question is, can i replication this functionality in 2007? Here is what a 2007 delivery message looks like: I know it's possible to customize DSN's. Can I make a custom DSN for this type of message and have the original included as an attachment? Anyone got any other ideas?

    Read the article

  • Apache Virtual host Subdomains points to same directory

    - by Jakobud
    I have setup subdomains using Apache before and have never really ran into any big problems. But with this (I believe Centos) server that is one of my clients, I'm not understanding what I'm doing wrong. Here is the .conf that apache is loading: Listen 80 NameVirtualHost *:80 <VirtualHost *:80> ServerName www.thedomain.com DocumentRoot /u1/thedomain.com/public RailsEnv production </VirtualHost> <VirtualHost *:80> ServerName subdomain.thedomain.com DocumentRoot /u1/subdomain.thedomain.com/public_html </VirtualHost> When I access either the primary or subdomain addresses, they both point to the primary www.thedomain.com content. Any thoughts? UPDATE: Yes I did a configtest and graceful after making the changes.

    Read the article

  • Late Model 2011 Macbook Pro with SSD appears to be off somehow

    - by chris
    Ok, I just got a SSD for my Macbook Pro Late-2011. The specs from what I read are that the laptop is capable of 6gbps, so I got myself a OZC Agility 240gb 6gbps SSD. Decided to join the club and speed test it with Blackmagic Disk Speed Test.. and the results are equivilent to that of a 3gbps setup. So.. I am wondering overall is there a configuration setting somewhere I can tweak? The original HD was a 500gb HDD the spinning kind. So I'm figuring maybe thats why there may be a setting somewhere hidden I dunno about that I can tweak, just wanna see if anyone else knows if this is the case. edit should also mention did a fresh factory install, nothing carried over from original hd

    Read the article

  • Will my RAID0 stay intact when I move it to a new computer?

    - by Jeremy H
    My primary drive is a 250GB WD SATA drive. So, I added 2x 500GB 7,200 RPM WD SATA drives into my Windows Vista box and created a 1TB RAID0. I then formatted the the primary drive and installed Windows 7. To my pleasant surprise when I booted into Windows 7 my RAID0 was still intact and I kept trotting along the same as I did before. Now I am replacing my motherboard, processor, and RAM and plan on formatting the primary 250GB drive again and using it to boot for a new clean install of Windows 7. My question is: if I move these two SATA drives which are setup for RAID0 into the new system, install Windows 7 again, will the RAID0 remain? Edit: Software RAID. I created it within Windows. The RAID0 does NOT contain the system boot partition.

    Read the article

  • I can connect to Samba server but cannot access shares.

    - by jlego
    I'm having trouble getting samba sharing working to access shares. I have setup a stand-alone box running Fedora 16 to use as a file-sharing and web development server. It needs to be able to share files with a Windows 7 PC and a Mac running OSX Snow Leopard. I've setup Samba using the Samba configuration GUI tool on Fedora. Added users to Fedora and connected them as Samba users (which are the same as the Windows and Mac usernames and passwords). The workgroup name is the same as the Windows workgroup. Authentication is set to User. I've allowed Samba and Samba client through the firewall and set the ethernet to a trusted port in the firewall. Both the Windows and Mac machines can connect to the server and view the shares, however when trying to access the shares, Windows throws error: 0x80070035 " Windows cannot access \\SERVERNAME\ShareName." Windows user is not prompted for a username or password when accessing the server (found under "Network Places"). This also happens when connecting with the IP rather than the server name. The Mac can also connect to the server and see the shares but when choosing a share gives the error: The original item for ShareName cannot be found. When connecting via IP, the Mac user is prompted for username and password, which when authenticated gives a list of shares, however when choosing a share to connect to, the error is displayed and the user cannot access the share. Since both machines are acting similarly when trying to access the shares, I assume it is an issue with how Samba is configured. smb.conf: [global] workgroup = workgroup server string = Server log file = /var/log/samba/log.%m max log size = 50 security = user load printers = yes cups options = raw printcap name = lpstat printing = cups [homes] comment = Home Directories browseable = no writable = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes printable = yes [FileServ] comment = FileShare path = /media/FileServ read only = no browseable = yes valid users = user1, user2 [webdev] comment = Web development path = /var/www/html/webdev read only = no browseable = yes valid users = user1 How do I get samba sharing working? UPDATE: I Figured it out, it was because I was sharing a second hard drive. See checked answer below. Speculation 1: Before this box I had another box with the same version of fedora installed (16) and samba working for these same computers. I started up the old machine and copied the smb.conf file from the old machine to the new one (editing the share definitions for the new shares of course) and I still get the same errors on both client machines. The only difference in environment is the hardware and the router. On the old machine the router received a dynamic public IP and assigned dynamic private IPs to each device on the network while the new machine is connected to a router that has a static public IP (still dynamic internal IPs though.) Could either one of these be affecting Samba? Speculation 2: As the directory I am trying to share is actually an entire internal disk, I have tried these things: 1.) changing the owner of the mounted disk from root to my user (which is the same username as on the Windows machine) 2.) made a share that only included one of the folders on the disk instead of the entire disk with my user again as the owner. Both tests failed giving me the same errors regarding the network address. Speculation 3: Whenever I try to connect to the share on the Windows 7 client I am prompted for my username and password. When I enter the correct credentials I get an access denied message. However I did notice that under the login box "domain: WINDOWS-PC-NAME" is listed. I believe this could very well be the problem. Speculation 4: So I've completely reinstalled Fedora and Samba now. I've created a share on the first harddrive (one fedora is installed on) and I can access that fine from Windows. However when I try to share any data on the second disk, I am receiving the same error. This I believe is the problem. I think I need to change some things in fstab or fdisk or something. Speculation 5: So in fstab I mapped the drive to automount in a folder which works correctly. I also added the samba_share_t SElinux label to the mountpoint directory which now allows me to access the shares on the Windows machine, however I cannot see any of the files in the directory on the windows machine. (They are there, I can see them in the fedora file browser locally)

    Read the article

  • How to mount a iSCSI/SAN storage drive to a stable device name (one that can't change on re-connect)?

    - by jcalfee314
    We need stable device paths for our Twinstrata SAN drives. Many guides for setting up iSCSI connectors simply say to use a device path like /dev/sda or /dev/sdb. This is far from correct, I doubt that any setup exists that would be happy to have its device name suddenly change (from /dev/sda to /dev/sdb for example). The fix I found was to install multipath and start a multipathd on boot which then provides a stable mapping between the storage's WWID to a device path like this /dev/mapper/firebird_database. This is a method described in the CentOS/RedHat here: http://www.centos.org/docs/5/html/5.1/DM_Multipath/setup_procedure.html. This seems a little complicated though. We noticed that it is common to see UUIDs appear in fstab on new installs. So, the question is, why do we need an external program (multipathd) running to provide a stable device mount? Should there be a way to provide the WWID directly in /etc/fstab?

    Read the article

  • Can I use a micro ec2 instance as a load balancer for my other large ec2 instances?

    - by Ryan Detzel
    The issue I'm having is I want to upgrade that instance often(security patches, etc) but I'm affriad something will fail and the site will be down. So, I want to have another server setup and load balance between the two that way I can easily disable one, upgrade it and once it's working add it back in the mix and repeat. What kind of machine is needed for a load balancer? Would the micro instance work just fine? The site gets anywhere from 3-10k hits/day. I plan on using nginx as the load balancer.

    Read the article

  • Windows Server 2003: Nat Port Forwarding Not Working

    - by jM2.me
    The setup is following: Internet (108.99.XXX.XX) <- Windows Server 2003 (10.0.0.1) <- Switch <- Office Computers (10.0.0.100-200 some static routes some manual some automatic) Windows Server has NAT installed on it and two network interfaces are configured properly. The problem is, whenever I try to forward port 80 (or any other) from office computer (lets say 10.0.0.100), it fails. Nic #1 Settings: All settings are obtained from ISP Nic #2 Settings: Set manually IP: 10.0.0.1 Mask: 255.255.255.0 Nat Server is configured to automatically assign IP addresses to private network. Settings are: IP: 10.0.0.0 Mask: 255.255.255.0 Forwarding was done in Routing and Remote Access (local) - IP Routing - NAT/Basic Firewall - Local Area Connection (right click_properties) - services and ports - Web Server HTTP - Private Address: 10.0.0.100 SO what is causing the problem of failure to forward any port from other computer inside private network?

    Read the article

  • Vnc viewer authentication failure

    - by Twosingleton
    I recently backed up my data and I had moved the vnc viewer executable from my PC to my portable hard disk. Realizing that I no longer had vnc, I got the latest one, but all of a sudden I could not connect to my server anymore and got authentification failure. So I moved the VNC exectuable back from my portable HD to my local HD. And I am still getting Authentification failure errors. I had a certain setup and I don't want to re-create it, do you know how I can recover or what happened to get auth failures all of a sudden ? I checked and the vncserver process is running fine. Old VNC viewer: vnc-4_1_3-x86_win32_viewer.exe New one:

    Read the article

  • Windows 7 Line In Delay Issue [closed]

    - by CheeseConQueso
    Not sure if this question should be posted on a different stack exchange site, so if you find that it should not be posted here, please move it. Either way, if you know the solution, please advise. I'm running Windows 7 Pro 32-bit on my Dell Latitude 2100 netbook and I'm having an issue with the line in device/driver/functionality. The device & driver are stock: Driver Date: 7/13/2009 Driver Version: 6.1.7600.16385 I'm almost sure that the manufacturer of the sound card is RealTek. The problem is that there is a delay (when monitoring input) between the source and the speakers. My setup is bass guitar running through a 12' long instrument cable (1/4") with a 1/4" female to 1/8" male adapter into the line in port on the computer. Then the 15' long headphones/line out cable goes into a standard set of powered speakers. How do I get rid of this delay? Thanks for any help.

    Read the article

  • How to make TortoiseHg pull certain branch only?

    - by mark
    I have cloned the default branch of a big repository and now I wish to pull from the server using the TortoiseHg client. However, TortoiseHg proposes to pull from all the branches. Is it possible to instruct it to pull from the current branch only? So far I have seen suggestions to: Setup a hook on the client side to reject pulls from unwanted branches Check incoming revisions in TortoiseHg and only pull the ones belonging to the current branch Use the Mercurial ACL extension to deny access to all the branches, but the current one. I dislike all of these solutions, since all of them are client based. In all of them TortoiseHg actually pulls all of the branches (even in the second, where the pulled revisions are arranged into a bundle presented in the incoming revisions view) Is there an hg pull -b BRANCH equivalent in TortoiseHg? Thanks. EDIT I know how to do all of this using the Mercurial command line client - hg.exe. This question is specifically about the TortoiseHg GUI client.

    Read the article

  • How to configure Bullet for LookAt?

    - by AllCoder
    I'm having problems positioning Bullet objects. I am doing: ToolVec3 origin = ToolVec3( obj_posx, obj_posy, obj_posz ); ToolVec3 vmod = ToolVec3( object_sizex / 2.0f, object_sizey / 2.0f, object_sizez / 2.0f ); btTransform shapeTransform = btTransform::getIdentity(); shapeTransform.setOrigin( btVector3(origin.x+vmod.x, origin.y+vmod.y, origin.z+vmod.z) ); btDefaultMotionState* myMotionState = new btDefaultMotionState(shapeTransform); btRigidBody::btRigidBodyConstructionInfo rbInfo(mass,myMotionState,m_collisionShapes[2],localInertia); btRigidBody* body = new btRigidBody(rbInfo); I then do: btCollisionObject* colObj = m_dynamicsWorld->getCollisionObjectArray()[i]; btRigidBody* body = btRigidBody::upcast(colObj); if(body && body->getMotionState()) { btDefaultMotionState* myMotionState = (btDefaultMotionState*)body->getMotionState(); myMotionState->m_graphicsWorldTrans.getOpenGLMatrix(m); } else { colObj->getWorldTransform().getOpenGLMatrix(m); } And after obtaining the matrix m, I paste it as model matrix. I am observing few things: I must add some weird "size / 2" to object's position, to have it drawed normally, I have following "up" look at vector defined: "0.0f, -1.0f, 0.0f" – basically, Y grows up, Z grows forward (to monitor), BUT – x grows LEFT, I think there is some conflict with the X direction.. I cannot obtain consistent positioning having world setup like this How to configure this in Bullet? Why the weird + size/2 requirement?

    Read the article

< Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >