Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 482/750 | < Previous Page | 478 479 480 481 482 483 484 485 486 487 488 489  | Next Page >

• Simple secured SFTP tunnel?

  - by babonk

  I'd like to setup an sftp tunnel so that I can connect to an IP-secured SFTP server through a gateway computer from anywhere, and download the files to anywhere. I was thinking of using a combination with netcat, having it listen to either WinSCP or PuTTY sFTP (doesn't matter which). Not sure how I would download the files to the connecting computer though. I would like the tunnel to be secured, preferably, with a username/password. I'm open to using alternative software but I'm looking for unintrusive, simple command line stuff because I don't want to install a lot on this computer. Thanks

  Read the article

• raid advice with SSD and two HDD

  - by Nin

  I have a new machine with one 128GB SSD and two 1TB HDD. On the SSD is the OS and my initial thought was to put the two HDD in RAID 1 for user data. After some more thought I came up with two other setups and now I'm in doubt :) Can someone advise what would be the best setup? 1: single SSD and HDD in RAID 1 (original thought) 2: Create 2 partitions on the HDD (128GB and 872GB). Put the two 872GB in RAID 1 and create another RAID 1 with the SSD and one 128GB HDD partition. 3: Create 2 partitions on the HDD (750/250), put the 705GB in RAID 1 and use the 2 250GB as backup and make automatic snapshots of the SSD to (one of) these partitions. I think the 2 main questions are: Is it advisable to create a raid array with only part of a drive and actively use the other part of that drive or should you always use the full disk? Is it advisable to create a raid 1 array with a SSD and HDD or will that blow the whole speed advantage of the SSD?

  Read the article

• Javascript Event in Innerhtml Resulting from PHP Server Script

  - by user144527

  I'm (very slowly) making a website, and I'm creating a search engine for the database, which is essential to organize the dependencies during data entry. Anyway, what I would like is to type a few keywords into a box, have a menu pop up with various search results, and have the box fill with the ID number of the selected entry when it's clicked. Currently, I have a document called search.php which fills a div called search-output using xmlhttp.open() and the innerhtml property. Everything is working perfectly except for filling the original search box with the ID number when clicking. My first attempt was to add an onclick event to each entry in the output from search.php. Unfortunately, I found that javascript inserted into innerhtml is not run for security reasons. I've been Googling for hours but haven't been able to find a solution. How can I get the original search text box to fill with the correct ID when I click it? Is what I'm doing a good setup for the results I desire, or is there a better way to integrate search features into data entry?

  Read the article

• Adding a W2008 Authenticating Server to existing W2003 Domain?

  - by spelk

  I have an existing W2003 Domain, simple setup with one DC and a SQL Server (approx 100 users). There are issues with Windows 7 Clients and login scripts and we're now seeing much greater numbers of Windows 7 users turning up as they upgrade their PC/Laptops. What I want to do, is add another Server with W2008 on it, and authenticate the Windows 7 Clients - but leave the W2003 server running as is - to prevent disruption to the network and the existing WinXP users. Is it possible? Any advice as to how do this, without major disruption to the W2003 network?

  Read the article

• Danger in running a proxy server? [closed]

  - by NessDan

  I currently have a home server that I'm using to learn more and more about servers. There's also the advantage of being able to run things like a Minecraft server (Yeah!). I recently installed and setup a proxy service known as Squid. The main reason was so that no matter where I was, I would be able to access sites without dealing with any network content filter (like at schools). I wanted to make this public but I had second thoughts on it. I thought last night that if people were using my proxy, couldn't they access illegal materials with it? What if someone used my proxy to download copyright material? Or launched an attack on another site via my proxy? What if someone actually looked up child pornography through the proxy? My question is, am I liable for what people use my proxy for? If someone does an illegal act and it leads to my proxy server, could I be held accountable for the actions done?

  Read the article

• SharePoint 2010 and Excel Calculation Services

  - by Cj Anderson

  I'm curious what the requirements are for Excel Calculation Services in Sharepoint 2010. I found an architecture document but it doesn't list out the specific requirements. (architecture I understand that you can install all the services on one server but it isn't recommended. It then talks about how you can scale up the application servers, and web front ends. What should the hardware look like for both the application server and web front ends? Do I need to setup a standalone box for each application server?

  Read the article

• Include page url in php error_log

  - by scatteredbomb

  I'm working on sorting out all my php errors. I've just setup so that all errors go into one log so I can view them. The problem is that I can't really see what page someone trying to access that gave them an error. Of course I can see the file where the error was generated, but these are often includes used on other pages - so I can't really see what URL a person was attempting to view when this error was displayed, so I can't really replicate the problem. Any suggestions? Is it possible to include the actual page URL?

  Read the article

• Cannot install VS Team System 2008 on Windows 7 Ultimate (64bit)

  - by systemX

  Hello, i am trying to install VS TS 2008 on W7 Ultimate (64bit), but i have run into errors during the setup. Please take note that i have tried to mount the iso to a virtual drive, and also extracted the iso contents to a local folder. Both methods have failed and produce the same error log below. [10/26/09,03:02:40] Runtime Pre-requisites: [2] Error: Installation failed for component Runtime Pre-requisites. MSI returned error code 1603 [10/26/09,03:02:42] VS70pgui: [2] DepCheck indicates Runtime Pre-requisites is not installed. [10/26/09,03:02:42] VS70pgui: [2] DepCheck indicates Microsoft Visual Studio 2008 64bit Prerequisites (x64) was not attempted to be installed. And the list goes on and on.. This is a fresh install of W7, and i have not installed MS Office 2007 at all yet, not sure if it would be causing my errors right now.. I appreciate any help i can get thank you.

  Read the article

• How to make TortoiseHg pull certain branch only?

  - by mark

  I have cloned the default branch of a big repository and now I wish to pull from the server using the TortoiseHg client. However, TortoiseHg proposes to pull from all the branches. Is it possible to instruct it to pull from the current branch only? So far I have seen suggestions to: Setup a hook on the client side to reject pulls from unwanted branches Check incoming revisions in TortoiseHg and only pull the ones belonging to the current branch Use the Mercurial ACL extension to deny access to all the branches, but the current one. I dislike all of these solutions, since all of them are client based. In all of them TortoiseHg actually pulls all of the branches (even in the second, where the pulled revisions are arranged into a bundle presented in the incoming revisions view) Is there an hg pull -b BRANCH equivalent in TortoiseHg? Thanks. EDIT I know how to do all of this using the Mercurial command line client - hg.exe. This question is specifically about the TortoiseHg GUI client.

  Read the article

• Protecting a webpage with an authentication form

  - by Luke

  I have created an employee webpage with a lot of company info, links, etc., but I want to protect the page because it contains some confidential company information. I am running IIS7.5 on Windows Server 2008 R2, and I already have the site setup as a normal, non-protected site. I want all active directory users to have access to the site. This is not an intranet site, it is exposed to the internet. I tried setting it up using Windows Authentication, but I had problems with multiple login prompts, etc. I just want a simple form for users to enter their credentials and have access to the site, and I need it to query the AD for login. I've searched the web for a guide on this, but I can't seem to find one that fits my situation. This is not a Web App. It is just a simple html site. Does anyone have any suggestions or a link to a guide on this? Thanks so much! -LB

  Read the article

• Wordpress 3 multi-site install

  - by mike

  Hello, Trying to figure out if this is possible... My company has a cms product that was written in Java and we decided to use Wordpress to run blogs for our clients. Obviously, Wordpress does not run on tomcat(at least not by default) so we installed Pound(http://www.apsis.ch/pound/) on our server and have setup any Apache and Tomcat on different ports. When "/blog/" is requested, the request is directed to Apache. This works fine but we would like to use Wordpress multi site so that we can manage all the blogs from a single interface. We would also like the url for every site to be "/blog/" example: http://www.site1.com/blog/ http://www.site2.com/blog/ I'm thinking it would have to be done with apache??? Is it even possible? Thanks!

  Read the article

• DVI problem with LG L204WT

  - by Holgerwa

  I have a LG L204WT which has VGA and DVI connectors. Until recently, I have used the monitor via VGA, but now I have upgraded the graphics board and switched to DVI. The problem is that each time after the computer starts, the monitor either doesn't show anything (black screen, but doesn't go into standby) or the picture is distorted. I then switch the monitor off and on several times, and at some point it starts correctly and then I can work as usual. This only happens on startup. It is one out of 3 monitors, the other two work fine. It seems to me as if the monitor is not able to synchronize on the DVI signal and either shows a distorted picture or nothing at all. There are no settings in the monitor setup that would change anything. What could be the problem?

  Read the article

• HDA NVidia (GT520) - Sound Issue

  - by Oliver Lucas

  I have an GT520 graphics card and I am trying to get the sound working with my XBMC setup and I'm having trouble. Things I have completed: aplay -l List of PLAYBACK Hardware Devices card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 then lspci 01:00.1 Audio device: nVidia Corporation HDMI Audio stub (rev a1) and alsamixer which is set to unmuted Everything looks well, so ran: aplay -D hw:0,3 /home/ollie/Music/alex.mp3 Playing raw data '/home/ollie/Music/alex.mp3' : Unsigned 8 bit, Rate 8000 Hz, Mono aplay: set_params:1059: Sample format non available Available formats: - S16_LE - S32_LE with no luck.. then speaker-test Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise Playback open error: -2,No such file or directory also tried running through ftp://download.nvidia.com/XFree86/gpu-hdmi-audio-document/gpu-hdmi-audio.html#upgrading_alsa_driver and http://wiki.xbmc.org/index.php?title=HOW-TO:Setup_audio_over_HDMI_on_nVidia_GeForce/nForce_controller plus 20 other websites with selective "fixes" etc.. but no luck _< I am a complete beginner with Ubuntu so this is a really steep learning curve for me, not sure I'm learning much though as its all just headaches atm! Thanks for any help Ollie

  Read the article

• SSD on Vmware ESXI 4 (TRIM? Good Idea?)

  - by nextgenneo

  Hi, I just posted about finding bottle necks and have narrowed it down to having way too many VMs on my machine on one 15K SAS drive. I have plenty of cores and plenty of ram. So I am planning on putting 6 VMs on one drive (so 5 drives for 30 VMs). I am thinking of using a 60GB Vertex 2 SSD. Each of my VMs will only need about 6GB of HDD space so this isn't a big deal. My questions are: does ESXI support Trim and do I really need it if I leave 25% of the drive as free space? If I need it should I get a diff drive that handles garbage collection differently? I have a RAID controller w/ write caching. I will still benefit from this? Will this effect my setup differently? Is there anything I need to consider regarding SSD's in virtualized environments. Thanks for any and all help!

  Read the article

• Trying to get MYLDAPAdmin working on Scientific Linux

  - by techsjs2012

  I am trying to get MYLDAPAdmin working on Scientific Linux. I downloaded it and installed it but I am getting the following message. It looks like my PHP is not setup for LDAP. Can someone help me? Missing required extension Your install of PHP appears to be missing LDAP support. Please install LDAP support before using phpLDAPadmin. (Dont forget to restart your web server afterwards) After adding php-ldap.. I am now getting this error Unable to connect to LDAP server dvldap01.uftwf Error: Can't contact LDAP server (-1) for user error Failed to Authenticate to server Invalid Username or Password.

  Read the article

• How to mount a iSCSI/SAN storage drive to a stable device name (one that can't change on re-connect)?

  - by jcalfee314

  We need stable device paths for our Twinstrata SAN drives. Many guides for setting up iSCSI connectors simply say to use a device path like /dev/sda or /dev/sdb. This is far from correct, I doubt that any setup exists that would be happy to have its device name suddenly change (from /dev/sda to /dev/sdb for example). The fix I found was to install multipath and start a multipathd on boot which then provides a stable mapping between the storage's WWID to a device path like this /dev/mapper/firebird_database. This is a method described in the CentOS/RedHat here: http://www.centos.org/docs/5/html/5.1/DM_Multipath/setup_procedure.html. This seems a little complicated though. We noticed that it is common to see UUIDs appear in fstab on new installs. So, the question is, why do we need an external program (multipathd) running to provide a stable device mount? Should there be a way to provide the WWID directly in /etc/fstab?

  Read the article

• Is there a way to schedule an automatic WinClone run on my Bootcamp partition?

  - by user17873

  Hi, I've currently got time machine setup to back up my entire OS X installation. I also have a backup tool within my Bootcamp Windows 7 installation which automatically backs up my windows profile data to an external drive partition. Finally, I'm also backing up my Bootcamp partition weekly and storing on an external drive using WinClone. The final piece I need to complete my external backup process is to have the WinClone application backup my Bootcamp partition automatically once a week rather than having to call it manually and remember. Is this possible?

  Read the article

• External monitor on old Dell 700m?

  - by Adam Henne

  Okay, linux noob. I installed 10.04 on an old Dell 700m in hopes of using it as a media center device. That seems to work great, except now it won't output to the external monitor. VGA cable works fine, TV recognizes other computers fine, it's the laptop that won't output. Turns out that the 700m, unlike every other computer out there, doesn't have a Fn hotkey to switch monitors. The only way to do it in Windows was to go through the Control Panel. In Ubuntu, though, the Monitor setup won't detect or recognize any monitors. The laptop display works fine, but I can't adjust or add anything. I did a little research and found suggestions for older Ubuntu builds involving the xorg.conf. I tried one out, in spite of my unfamiliarity, and it's screwed the whole display big time. I can fix that with a clean reinstall, that's no problem, but I'm cautious about editing xorg again. Any suggestions? Thank you!

  Read the article

• LDAP replication breaking referrals

  - by MasterZ

  We have an issue that we believe is caused by ldap replication changing the port of the referal from 686 (secure) to 389 (unsecure). If we setup a new referral everything works, but then as soon as we change someone's password it changes on the master, and then the master replicates and the referral breaks. Any further attempts to modify someone's account give the error "PAM: Cannot connect to LDAP". We used snoop and monitored the firewall to see what was going on. The first password attempt (the one that works) goes over port 686 (as it is supposed to) but every subsequent attempt attempts to use port 389, and therefore fails. We only have 1 referral configured on the client, port 686

  Read the article

• How to trigger chef-client on all nodes from my workstation

  - by divyanshm

  I have 5 nodes and all of them have one setup cook-book in common. Now I would like to add another task in this common cookbook that would configure SQL server for me on all the nodes. Is there a way/command to manually trigger this change across all clients right away? I use azure VM's. All the nodes are Windows Server 2012 machines. I could do a knife winrm machine-name chef-client -m -x username -P password on all the machines, but i'm sure there should be a better way of doing this. I'm new to using chef, so I might be missing a very basic command here.

  Read the article

• DHCP server inside a virtual machine can't see other machines

  - by William

  Hi, I setup a private network from virtual machines and one of the machines is the DHCP server for the group. I want to specify a next-server for the DHCP server but I'm having trouble connecting to any of the machines that I lease IPs to. I'm just trying to do a simple ping/ssh to 10.0.0.252 (a machine with a lease) but it doesn't seem to respond. Any advice? I'm assuming I need to be able to connect to my next-server but maybe I'm wrong. Thanks.

  Read the article

• Forwarding subdomain to different port on Windows IIS 7

  - by Ralph

  I have a IIS 7 server with Plesk setup on a Windows 2008 R2 server and I have created a subdomain sub1.domain.com, which by default leads to my webserver on port 80, but I don't want that. I want the subdomain to lead to my port 25566 instead (for a Minecraft server), how can I accomplish this? I tried this with host headers / bindings but that resulted in a port already in use warning. How can I do this? How can I make my sub1.domain.com lead to IP.IP.IP.IP:25566? Any help would be greatly appreciated.

  Read the article

• How to modify existing keyboard layout (RU, kbdru.dll)?

  - by Anton

  There's a program I'm thinking of using called Punto Switcher that detects a language I'm typing in and switching entire word between Russian and English. The problem I have with this setup is that even though most of Russian letters "correspond" to English letters, Russian keys are scattered all over the keyboard and I don't feel like learning them all as I type in English mostly. Now, the program is very specific about me using RU, kbdru.dll file, not any other and if I use a custom keyboard under Russian, it doesn't recognize what I type so I think I should change the default RU keyboard. I created my custom keyboard using Microsoft's tool and I need to modify original one. I think it will take more than just replacing a file. Help?

  Read the article

• Win XP cannot connect (or see) my wifi network, but can see others

  - by Jorre

  since yesterday I have a strange wifi problem with my pc. I have a wireless linksys router setup that worked fine for many months, now since yesterday my pc won't connect to the wifi signal anymore. The strange thing is, my macbook pro still connects fine. SSID is broadcasting, but my windows XP doens't see it, I have all signal modes set to "auto". Windows XP sees all my neighbours wifi networks, so the wifi card isn't broken or anything. Any idea what can be wrong here?

  Read the article

• Bad password when logging in via Remote Desktop

  - by Shiraz Bhaiji

  I have just setup a windows 2003 server running in hyper-V. When I log in via Hyper-V it works fine. When I try to login via remote desktop I get a bad user name or password error. I have: Disabled the firewall Enabled remote connections Before I did the above I did not get to the login screen. I can ping the ip address of the image. I am trying to login as Administrator. Anyone have an idea about how to fix this? Edit I have now managed to fix this by changing the password to something without special characters. Strange thing is the I could not see any problems with the passord, had tried typing it into the user name field to check it.

  Read the article

< Previous Page | 478 479 480 481 482 483 484 485 486 487 488 489  | Next Page >