Search Results

Search found 18911 results on 757 pages for 'device manager'.

Page 481/757 | < Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488  | Next Page >

• Laptop stopped recognizing USB hard drive

  - by vahokif

  Hi, My Packard Bell EasyNote TX86 laptop stopped recognizing my 1 TB Toshiba Store Art hard drive. It worked fine until now, and it still works on other computers. Other USB devices (including storage) work, and I've tried plugging it in every port, to no avail. When I plug it in it spins up, but Windows doesn't react at all (it's not in disk management), Linux doesn't write anything in dmesg and I can't see it in BIOS setup. I didn't use it at all today, apart from plugging it into a freshly-installed Windows 7 machine once (where it worked). What can I do? Which device is to blame here? EDIT: One more thing. I unplugged the drive while the laptop was hibernated. Google says this might be the problem and it might have something to do with resetting the USB Host Controller.

  Read the article

• Weather Logging Software on Windows Home Server

  - by Cruiser

  I'm looking for some weather logging software that I can run as a Windows Home Server add-in, or as a service on my Home Server, so I don't need to log into my Home Server to log weather data. I have an Oregon Scientific WMR918 weather station, and an HP MediaSmart EX485 Windows Home Server. The two are currently connected through a serial bluetooth adapter, but that shouldn't matter as the computer sees it basically as a serial device. I'm currently using Cumulus to log data and upload to Weather Underground, but it is a regular windows application, so I need to remain logged into my Home Server by RDP in order to run the software (I disconnect, but don't log off so the session remains open). Ideally I would like something to run as a service or WHS add-in, so that it runs all the time without logging in, can log data from my WMR918, and can upload to Weather Underground. Thanks!

  Read the article

• Lock System when certain hardware is removed

  - by er4z0r

  Hi all, I am working at a company where you are suppused to lock your screen whenever you leave your desk alone for a few minutes. Now I wondered if there is a nifty little tool that would lock my screen once a certain device is removed from the system. The ideal thing would of course be to have a short-range transmitter that causes the screen to be locked once it goes out of range. But for now I would also stick with removing a pen-drive from my laptop. I am pretty sure this is feasible. I just wan't to know if there are any preexistent projects.

  Read the article

• GRUB Error after Deleting Linux Partition

  - by Nironan12

  I was dual-booting with Windows 7 and Windows Vista each taking up half of my hard drive. In Windows 7 I used Easeus Partition Manager to shrink my Windows 7 volume 8GB. On the unallocated space, I installed Linux Mint 8 RC1. After a little bit of playing around with it, I booted in Windows 7, used EPM again and deleted the 8GB Linux partition. I then extended Windows 7 on the 8GB. After restarting my computer, all I get is a black screen and this: GRUB loading. error: no such partition grub rescue> I do not have a Windows 7 disk nor does my computer come with Startup Repair. What do I do?

  Read the article

• wbadmin incremental system state backup

  - by user74513

  I am doing system state backups on a Windows Server 2008 R2 Enterprise (Service Pack 1) machine and expected the backups after the first one to be incremental. However with each backup a new directory with vhd files are created and the vhd files are almost the same size as the with the first backup. So the backups does not seem to be incremental. I used the following command to do the backup: wbadmin start systemstatebackup -backupTarget:f: I played around with the settings under "Configure Performance Settings" in the Windows Server Backup plugin in Server Manager but according to the description at the top of the dialog these settings are not applied to system state backups. Are there any settings available for wbadmin system state backup to make the backups incremental?

  Read the article

• Just bought Logitech G35 headset, want to enable/disable headet in one action

  - by Roy Rico

  Hello, Just bought Logitech G35 USB headset, want to enable/disable headet in one action. I have windows 7 64 bit, and currently, to switch from the headset to my spakers (or vice versa) without unplugging the headset, i have to go thru this steps: right click on the sound icon select "sounds" select the "Playback" tab right click headset and hit enable right click speakers and hit disable same steps when wanting to switch back I have to disable the devices, because not all of the programs which are outputting sound will switch immediately if I just set either device to default. I am looking for this to be a single action (either a batch script or a windows shortcut to some action with parameters?) Thanks!

  Read the article

• firefox aliased/jagged fonts in xfce

  - by hasen j

  I've been using linux mint 7 for a couple of weeks now and I'm pretty happy with it, but I wanted to try out other desktops, e.g. KDE/Xfce I'm not sure if it's KDE's fault of Xfce's, but firefox's font rendering sucks now, it renders jagged/aliased fonts. I'm using xfce right now, My Xfce settings Manager > appearance > fonts settings roughly look like this: Default Font: Sans | 9 Rendring : [x] Enable anti-aliasing Hinting: None Sub-pixel Order: None But it's as if firefox ignores these settings!

  Read the article

• Any way to know what files were in a broken ZFS pool?

  - by Erik Tjernlund

  I have a large ZFS pool of 4 combined drives. Now, the filesystem can not be mounted: pool: tank state: UNAVAIL status: One or more devices could not be opened. There are insufficient replicas for the pool to continue functioning. action: Attach the missing device and online it using 'zpool online'. see: http://www.sun.com/msg/ZFS-8000-3C scan: none requested config: NAME STATE READ WRITE CKSUM tank UNAVAIL 0 0 0 insufficient replicas c10t0d0 ONLINE 0 0 0 c8t0d0 UNAVAIL 0 0 0 cannot open c8t1d0 ONLINE 0 0 0 c10t1d0 ONLINE 0 0 0 Probably a broken drive (c8t0d0). I'm not overly concerned by the loss of the data, but I'd love to know exactly which files were in that pool. Is there any way to get a listing of what files were there?

  Read the article

• Convert video files for Maemo (Nokia N900) using ffmpeg/mencoder

  - by Vikrant Chaudhary

  I'm a newbie in video encoding so I'm looking for some expert advice. I'm looking to transcode media files with ffmpeg or mencoder (or something other) on Ubuntu for my Nokia N900 running Maemo. I'd prefer mencoder, because of ffmpeg's crazy dependencies. Video output should be AVC/H.264 (probably hardware accelerated on device). Audio output in AAC (should have preferred Vorbis but not supported natively and requires .mkv which is also not completely supported). Output video should retain the original aspect ratio. Resolution of screen is 800x480 (16:10). (Explanation of why-this-value-is-chosen would be really appreciated). Thanks.

  Read the article

• SQL2008 Won't Work After SP1 Install?

  - by leen3o

  I have SQL2008 installed on my Win2008 server, and its been working fine - I have sites running using SQL databases etc.. I thought I would install SQL2008 SP1, but after install I cannot connect to SQL via Management Studio, and in configuration manager I cannot start SQL? TITLE: Connect to Server Cannot connect to #MYINSTANCENAME#. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 BUTTONS: OK I'm not really a techie so a bit stuck?? any ideas??

  Read the article

• NTFS Error - file system structure is corrupt and unusable

  - by SomeGuy

  My Windows 7 (64) keeps completely locking up, and I have to hold the power button to shit it down. Event logs are showing EventID 55. I realize that this can be a warning sign of an impending disk failure, but my data on this machine is safely backed up and I don't feel like taking the time to replace the drive right now. When I have seen this problem before, I have been able to delete the offending folder with a Linux Live CD. (When CHKDSK /F didn't work). In this case, the folder is from VSS. I assume this is from Crashplan, my online backup provider. What are the ramifications of deleting this folder from Linux? Is it safe to do? "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolumeShadowCopy26."

  Read the article

• Personal Virtual Desktop Collection: User Assignment

  - by Fitzroy

  Using Windows Server 2012 Remote Desktop Services, I have a 'Personal Virtual Desktop Collection' with automatic user assignment enabled. According to Microsoft "Personal virtual desktops are permanently assigned to a user account and the user logs on to the same virtual desktop each time." Is there a way either through the Server Manager UI or PowerShell to determine which user has been assigned to which VM? The only way I have found so far is to query the 'Remote Desktop Users' group on each VM in the collection, however that requires each VM to be powered on. There must be a better way.

  Read the article

• Cheapest server to run Windows 2008 R2?

  - by chopps

  Hey Everyone, I want to build a really cheap server to use for testing etc but don't want to spend alot of dough. Any recomendations on what kind of home pc/server would work for these requirements? Any place to get refurbs at a good price? Component Requirement Processor Minimum: 1.4 GHz (x64 processor) Note: An Intel Itanium 2 processor is required for Windows Server 2008 for Itanium-Based Systems Memory Minimum: 512 MB RAM Maximum: 8 GB (Foundation) or 32 GB (Standard) or 2 TB (Enterprise, Datacenter, and Itanium-Based Systems) Disk Space Requirements Minimum: 32 GB or greater Foundation: 10 GB or greater Note: Computers with more than 16 GB of RAM will require more disk space for paging, hibernation, and dump files Display Super VGA (800 × 600) or higher resolution monitor Other DVD Drive, Keyboard and Microsoft Mouse (or compatible pointing device), Internet access (fees may apply)

  Read the article

• Route traffic on vpn to another interface on an ASA 5510

  - by Dave

  I have a ASA 5510 that has about 60-70 vpn tunnels. I have four interfaces on the device: 1)External, 2)192.168.1.0, 3)192.168.2.0, 4) 192.168.3.0 A VPN tunnel is configured from the remote site (192.168.200.0) to the 192.168.2.0 subnet on the ASA. I have remote applications I would like the users at the remote site to be able to access which are hosted on the 192.168.3.0 subnet. I can route traffic between the subnets that are located on the ASA. Any way I can route traffic from the remote site to the 192.168.3.0?

  Read the article

• How to go about scheduling a task in windows 7 to change wireless connection

  - by Skindeep2366

  This may or not be something that can be done. I cannot find anything on the wireless connection manager built into windows 7 let alone methods for passing params into it. Problem is as follows: I have 2 wireless routers. One provides internet access, the other provides sole access to the local network. Every day at 4am the main system creates a backup in 2 locations. One is a External usb drive, the other is a location on the network. This is all cool if it is remembered to change over to the local network router before leaving. But if it is forgotten the roof will collapse, the walls will burn, and I will be... well you get the idea. Solution: there is already a custom event that fires a automated backup program at 4am everyday. I need someway to force the wireless network to use the correct connection at say 3:58am everyday. Any ideas????

  Read the article

• Limit disk I/O one program creates?

  - by Posipiet

  Hardware: one virtualization server. Dual Nehalem, 24GB RAM, 2 TB mirrored HD. Software: Debian, KVM, virt-manager on the server with several virtual machines that use Linux too. 2 TB Disk is a big LVM, each VM gets a logical volume and makes its own partitions in that. Problem: One of the programs that runs on one of the VMs creates huge disk load. This never was an issue, because the program never ran on such a powerful hardware. Now the CPUs are fast, and lots of I/O is the result. We cant do much against that at the moment, because the tool is a black box. On the other hand, the speedy computation is welcome. The program creates about 5 GB of temp files which get overwritten during the next iteration. Question: How can we limit the disk I/O for the process?

  Read the article

• Restricting SSRS subscriptions to shared schedules only

  - by Matt Frear

  Hi all I'm reasonably new to SQL Server Reporting Services and Report Manager, and completely new to SSRS's Subscriptions. We're running SSRS 2008. Out of the box it seems that a user with the Browser role can create a Subscription to a report and schedule it to run at any time they choose. As an admin I have setup a schedule called "Overnight reports" and have it run every night from 1am. I would like it so that when a regular user creates their Subscription they can only use one of my shared schedules so that their subscription will only run overnight. Is this possible? Thanks -Matt

  Read the article

• Ubuntu: Is there a good tabbed PDF viewer?

  - by Frank

  Is there a good non-bloated PDF viewer for (Ubuntu) Linux that supports tabs? I don't want to use Acrobat Reader because it is slow and takes much memory, and my computer isn't the fastest. I know the alternative readers evince and foxit, but they don't support opening different PDF files in tabs. (foxit has that feature on Windows, but the Linux version 1.1, which I just tried, doesn't have it.) For evince, I know many people would like this functionality, but they get ridiculed by Ubuntu people (see here), who say that tabs are the task of a window manager. If that is the case, how can I put all evince windows into one in GNOME?

  Read the article

• Problem with Xen, xvda and sda

  - by Javier J. Salmeron Garcia

  I am creating a cloud for my university using Eucalyptus with Xen (PCs have Debian Squeeze 64 bit installed). I have a problem with the following guest configuration: # # Configuration file for the Xen instance evenmorefinalfoo, created # by xen-tools 4.2 on Thu May 26 11:03:06 2011. # # # Kernel + memory size # kernel = '/boot/vmlinuz-2.6.32-5-xen-amd64' ramdisk = '/boot/initrd.img-2.6.32-5-xen-amd64' vcpus = '1' memory = '128' # # Disk device(s). # root = '/dev/sda2 ro' disk = [ 'file:/home/xen/domains/evenmorefinalfoo/disk.img,sda2,w', 'file:/home/xen/domains/evenmorefinalfoo/swap.img,sda1,w', ] As you can see, the disk and swap images are meant to be mounted on sda1 and sda2. However, when I start the guest, these are mounted on xvda1 xvda2, provoking an error. Is there anything that I can do about that? It seems like it is a Xen error. Thank you in advance,

  Read the article

• Hiding monitor from windows, working with it from my app only [closed]

  - by Mikhail

  I need to use a monitor as a "private" device for my special application, I want to use it as a flashlight of a sort and draw special patterns on it in full screen. I don't want this monitor to be recognized by OS (Windows 7) as a monitor. I.e. user should not be able to move mouse to that monitor, or change its resolution, or run screensaver on it or whatever. But I want to be able to interact with it from my application. Monitor is plugged using an HDMI cable to a video card (most probably nVidia). What is the simplest way to do this? All solutions are appreciated, including purchasing additional adapters or simple video cards, or any other special devices.

  Read the article

• Using a PC + headset as a telephone without VOIP

  - by user76782

  I'm trying to find a way to realize a decentralized callcenter, so that the callcenter agents can talk from their home office with just a PC + headset. The big challange is that some of the agents have very low bandwith and the quality with VOIP is too bad. So my question is: What other solutions are possible when VOIP is not a option? What exactly do I need to do if I try to achieve this with for example Landline/PBX or GSM? (e.g. Which software do I need to install? Which device do I need?)

  Read the article

• Network connection through a wall

  - by BCS

  I have a place where I want to set up a network connection through a normal residential wall where I can't cut any holes. I don't want to just set up a wireless system. Does anyone make a device that you place on either side of a wall to hook up a connection? Preferably something that can do 100Mb full duplex and can't be eavesdropped on with common hardware? The situation is that I'm moving into a new place (that I'm renting, so I can't do any cutting) and the POP is in one room and I have all the equipment is in another room.

  Read the article

• HP Proliant ML115 G5 - Boot order lost after reboot

  - by Filipe YaBa Polido

  I have one HP Proliant ML 115 G5 (AMD) with the latest BIOS (07-06-2009) and recently I've installed an USB disk. This is a common problem on old Proliant servers. When you plug the USB disk, BIOS boot order changes and tries to boot via USB. So, I'll change the BIOS settings and make the SATA disk the default boot device. The problem is, when I need to unplug the usb disk, and plug it again later. I can't be always changing the BIOS settings... How can one solve this for ever?!?!

  Read the article

• What is the proper way to report a bug against the upgrade process from Ubuntu 9.10 to 10.4?

  - by Kim

  I just upgraded to lucid and discovered a nasty bug. It prevents the system from booting and took me hours to resolve. Now I'd like to report it along with the workaround I found. The only problem is: Where? Other such bugs have been filed against "update-manager", but that's just the GUI calling some scripts which do the real work. so what do I do? What should I substitute for XYZ in ubuntu-bug XYZ ?

  Read the article

• Question about the linux root file system.

  - by smwikipedia

  I read the manual page of the "mount" command, at it reads as below: All files accessible in a Unix system are arranged in one big tree, the file hierarchy, rooted at /. These files can be spread out over several devices. The mount command serves to attach the file system found on some device to the big file tree. My questions are: Where is this "big tree" located? Suppose I have 2 disks, if I mount them onto some point in the "big tree", does linux place some "special marks" in the mount point to indicate that these 2 "mount directories" are indeed seperate disks?

  Read the article

< Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488  | Next Page >