Search Results

Search found 17847 results on 714 pages for 'virtual disk'.

Page 481/714 | < Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488  | Next Page >

• What is causing a vm to exhibit packet loss?

  - by Joe Philllips

  We have a pretty nice piece of hardware set up to run multiple virtual machines in vmware and one of the vm's is an instance of Windows Server 2003 running SQL Server 2005. For some reason we occasionally see 10-20 seconds of straight packet loss to this machine from remote machines (my workstation) as well as other vm's on the same physical hardware. I am using PingPlotter to keep a close eye on the packet loss. So far we've turned off flow control on the NIC but we are already running out of other things to try. What might be causing this and how can I identify the problem? Note: We also have another server with a very similar configuration with the same type of problem to a lesser extent (because its not used as heavily?)

  Read the article

• Issues with non-HP harddisk in HP ML 350 server?

  - by Torben Warberg Rohde

  I'm looking to buy some extra disk space for a HP ML 350 G5 server. It is for simple file-serving - not OS/system stuff. HP harddisks are insanely expensive, so I'm tempted to buy some other brand instead. I have heard that they sometime use special firmware on their disks, but I suspect that might just be HP spreading rumors to sell disks. Does anyone have experience using non-HP disks? Any features not working, or not being able to build the RAID at all? I'm looking at 2.5" SAS Seagate drives - Constellation 500 GB (7.2k) or Savvio 600 GB (10k).

  Read the article

• MySQL - allow connection from remote machine as root user

  - by Senthil Kumar

  Hi all, When I installed MySQL server in Windows, there was an option "Allow root connection from remote machine". I checked that option and I had no probs when using it. I installed MySQL server in Ubuntu 9.04 using apt-get install. I can connect to the sql server from the same machine but when I try to connect from a virtual machine, it doesn't work. My guess is that I should allow root connection from remote machine. How to do that?

  Read the article

• Removing vg and lv after physical drive has been removed

  - by Rene

  We had a disk fail and replace but forgot to vgreduce first. The drive was on it's own VG and with two empty LV's and these are now causing LVM to complain every time any command is run, i.e. # lvscan /dev/vg04/swap: read failed after 0 of 4096 at 4294901760: Input/output error /dev/vg04/swap: read failed after 0 of 4096 at 4294959104: Input/output error /dev/vg04/swap: read failed after 0 of 4096 at 0: Input/output error /dev/vg04/swap: read failed after 0 of 4096 at 4096: Input/output error /dev/vg04/vz: read failed after 0 of 4096 at 995903864832: Input/output error /dev/vg04/vz: read failed after 0 of 4096 at 995903922176: Input/output error /dev/vg04/vz: read failed after 0 of 4096 at 0: Input/output error /dev/vg04/vz: read failed after 0 of 4096 at 4096: Input/output error The two LV's are not important, I just want to stop this error from displaying.

  Read the article

• What determines the time to first ping response in an OS?

  - by Stuart Woodward

  When a server (say Windows, Linux) is rebooted, it will take some time to respond to ping. I'm assuming that the software firewall has to be up before pings will be returned as there might be a setting to disable ping responses. Everyone knows that Windows and Linux have have totally different architectures so lets treat them separately. The answer I'm looking for is "After XXX is running, pings will be returned." It would be helpful to know where in the boot order this is too. i.e. at the start or end. I ask because we get questions from a customer about why it takes so long to respond to ping after creating a Virtual Machine. I'm sure this is just an artefact of the OS boot behaviour.

  Read the article

• Software to cache a web application for use offline

  - by littlecharva

  My boss quite regularly has to demo our web application to clients in a situation with no wifi available and sketchy 3G access, quite often the 3G lets him down. I have considered setting a copy of our server up in a virtual machine on his laptop so he could demo it offline, but I fear this will just introduce more headaches when he forgets how to boot the VM up. What I'd ideally like is an app that records you logging into a web app, saves copies of all the pages and ties the links and buttons you click up to offline copies of the pages it saves. So you could run through the demonstration you're going to give and have it cache the pages. When you then click the same buttons and links in offline mode it will present the relevant offline pages. Does such a thing exist? Can anyone recommend any alternative solutions to this problem? Thanks, Anthony

  Read the article

• Restoring Mac-bootcamp-windows-partition image to Windows machine

  - by jpwagner

  Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

  Read the article

• Restoring Mac-bootcamp-windows-partition image to Windows machine

  - by jpwagner

  Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

  Read the article

• Why my AD domain doesn't work on my laptop

  - by Frederick Marcoux

  I have installed Windows Server 2008 R2 on a virtual machine with a bridged network card and installed Active Directory. I configured it and when I try to connect my laptop to the domain name, in this case, creationsmicroweb.ca (doesn't exist, don't try, for local only), I can't get connected. My laptop just doesn't see it. I don't know why! There's a resume of my config: Domain Name: creationsmicroweb.ca Forest: new, principal domain controller IP: Fixed (192.168.1.100) DNS Name: none (just for local, I ignored them) NETBIOS name: MICROWEB If someone as found why, please help me! This is for my business that I'm starting and I can't find why it doesn't work!

  Read the article

• Virtualhost Wildcard Subdomains

  - by Khuram

  We have one static IP on which we have routed our company website. We have setup a local machine on windows with WAMP to run our testing server. We want virtual hosts to test our different apps. However, when creating subdomains, we have a new project which uses wildcard subdomains. How can we create the wildcard subdomains in VirtualHosts. We use, NameVirtualHost * <VirtualHost *> ServerAdmin admin@test DocumentRoot "E:/Wamp/www/corporate" ServerName companysite.com </VirtualHost> <VirtualHost *> ServerAdmin admin@test DocumentRoot "E:/Wamp/www/project" ServerName project.companysite.com </VirtualHost> <VirtualHost *> ServerAdmin admin@test DocumentRoot "E:/Wamp/www/project" ServerName *.project.companysite.com </VirtualHost> However, the last * wildcard does not work. Any help?

  Read the article

• Dell Dimension running Fedora12 does a "Sleeping Beauty" and I am not a "handsome prince"!

  - by Jim Dobbs

  Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedora12 does a "Sleeping Beauty" and I, apparently, am not am not a "handsome prince"! The system puts video and network to sleep and it will not wakeup. I have heard of this problem on laptops, but this is a tower. Any ideas or help is appreciated. I tried to ping the network card from another system and ping fails. The logs indicate that the system continues to be active. Pressing keyboard short-cut keys makes the disk light blink but neither the video or network card comes alive. Failing all else, are there any Linux commands that I could schedule in cron to pulse video and network adapters hourly that will keep them awake? Or, should I wait on Fedora13? Before this machine, I built a Dimension 2400 with Pentium IV and it had the same problem. Fedora9 on the same hardware is fine.

  Read the article

• Torrent: Webseed or seeding client on server?

  - by Eliasdx

  I want to share a file using bittorent which I also offer over http. The torrent should be seeded by a dedicated and a virtual server and by people who are downloading it to lower bandwidth costs. My question: Should I set up a bittorrent client (rtorrent) on the servers and let them seed the file or should I use webseeds? I also want to limit the bandwidth the server uses to seed which is possible using rTorrent. How many bittorrent clients support webseeds? I found it in µTorrent and never heard of it before.

  Read the article

• Ubuntu on an XPS 14 Ultrabook with mSATA cache and 500GB HD - how to partition for dual boot?

  - by JDS

  I am getting an XPS 14 ( http://www.dell.com/us/p/xps-14-l421x/pd ) and I want to dual-boot Windows and Ubuntu. This thing has a 500GB standard HD and a 32GB mSATA that can be used as cache. Does anyone know how this thing is partitioned? Is the OS installed on the mSATA drive and data is on the big HD? Is there a BIOS controller or maybe even a Windows driver that makes the mSATA drive and 500GB HD appear contiguous? I get the impression that something makes the mSATA be used invisibly as cache, but I can't find any technical documentation how that works. My primary concern here is wrt dual-booting Ubuntu. I want to know if I need to partition the mSATA separately, or the big HD, or just partition the "magic" contiguous disk space that appears available to the OS.

  Read the article

• Windows replacement for HAProxy

  - by GrayWizardx

  It does not appear that there is a similar question to this already posted, so I will go ahead and ask. I am working on a project that could benefit from having two - four servers handling incoming requests to a backend webservice. The service does not require SSL but does need to support occassional long running processes (upto 120 secs). This project does not at present have the funding to purchase a hardware load balancing solution. I have previously used HAProxy as a solution for this, and found it very simple and straightforward. Is there a similar product for windows (server 2003 or 2008) which provides similar configuration options and runs as a lightweight service? For reasons outside my control I cannot setup a Linux machine (physical or virtual) and so I am looking for behaviour that can be deployed on a windows machine. I can only find Perlbal which appears to fall into this category. So as not to keep this open indifenitely I will give credit to the only answer.

  Read the article

• Root partition full? CentOS

  - by Joao Heleno

  Hi! I'm running CentOS 5.4 and my / is full. I wanted to install gparted but in order to do that I must install Priorities and it's when I get an error saying / is full so I can't go forward. Here's some output: fdisk -l Disk /dev/sda: 250.0 GB, 250000000000 bytes 255 heads, 63 sectors/track, 30394 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 2611 20972826 83 Linux /dev/sda2 2612 3251 5140800 82 Linux swap / Solaris /dev/sda3 3252 30394 218026147+ 83 Linux df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 20315812 19365152 0 100% / /dev/sda3 211196248 49228164 151066780 25% /home tmpfs 1552844 0 1552844 0% /dev/shm I'm not using LVM. Please advise. Thanks

  Read the article

• Is it possible to change the default scan folder on an Eye-Fi Wireless SD Card

  - by MichaelPh

  By default Eye-Fi cards scan the DCIM folder (and subfolders) used by most digital cameras for new images to upload. Is there a way of changing this to a different folder? In my particular case I'm using a Kodak photo scanner (P461) that uses a PHOTO(N) folder format to store the scanned images, as far as I know the device has no configuration interface to alter this setting so that doesn't seem to be an option. This topic on the Eye-Fi forums is the closest I've come to a solution, but a perfunctory investigation of Disk Probe doesn't make it obvious what needs to be modified on the card.

  Read the article

• Running Multiple sites with multiple domains apache

  - by PsychoData

  I am having a rough time running apache and using multiple domain names here is a snippet of my config file. I keep getting a error saying that NameVirtualHost has no VirtualHosts. I want them both running on the same IP and I'm not sure why this doesn't work. I've been digging through the documentation for VirtualHosts, NameVirtualHost, and apache's page about name based virtual hosting. That example in the name based page is almost exactly my config! What am I doing wrong? Listen *:80 NameVirtualHost *:80 <VirtualHost *:80> ServerName www.sample1.net DocumentRoot /var/www/sample1-net </VirtualHost> <VirtualHost *:80> ServerName www.example2.net DocumentRoot /var/www/example2-net </VirtualHost>

  Read the article

• ZFS SAS/SATA controller recommendations

  - by ewwhite

  I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS JBODs. In addition, how does battery-backed write cache (BBWC) play into the solution?

  Read the article

• Cross-Forest Trust

  - by cdalley

  I am looking at testing a cross-domain trust we can have two domain controllers (with different forests and domain names) setup so we can move everyone onto the new domain. We do NOT run exchange on site and we do not have any links to O365 to AD currently. Onto the problem: I have setup two DCs in a Virtual Machine: They are on the same network 192.168.0.* The Windows 2003 server: Name: OLDSRVR "Clone" of our current Domain Controller IP: 192.168.0.1 Domain: internal.test.com The Windows 2012 server: Name: ADCTEST01 Brand new domain setup from scratch separate to internal.test.com Domain: internal.test2.com IP: 192.168.0.2 OLDSRVR can only see ADCTEST if it has dynamic IP set. If I set a static IP it cannot see it. If I try using the dynamic IP and try to join it gets to the end then complains "??The trust relationship between this workstation and the primary domain failed" Any ideas?

  Read the article

• Other users on my Server?

  - by Jennifer Weinberg

  I'm buying a Server from a person (that I don't know really well) and I want to make sure that the previous owner hasn't got any access anymore. It's an Ubuntu Virtual Server and I already received the admin access (via shell). How can I find out if there are still other accounts left, who are still able to access my server (e.g. with a still existing shell account, ftp or another type of user account)? And how can I delete them if these accounts exist? Best regards, Jennifer

  Read the article

• SQL Server Transaction Log RAID

  - by Eric Maibach

  We have three SQL Server servers, and each server has a about five or six databases on it. We are in the process of moving these servers to a new SAN and I am working on the best RAID configuration. Currently all of the log files for all of the databases share a RAID array, there is nothing else on this RAID array except for the log files, but all of the databases use this same array for their log files. I have read that it is best to have log files on separate disks. But in our case I am not sure whether it would be best to have one big array with about 8 drives that all the log files are on. Or would it be better to create four two disk arrays and give some of the larger databases their own dedicated disks for their log files?

  Read the article

• ubuntu qcow2 image for local usage

  - by aisbaa

  I'm using kvm and I would like to run ubuntu server on it. My goal is to run db2 database instance for development. Is there ready to use ubuntu qcow2 images online for such purpose? Or should I install it from live cd? I've found this instruction UEC/Images, but at launch I get: $ kvm -fda ${floppy} -drive if=virtio,file=./disk.img -boot a ... Nothing to boot: No such file or directory (http://ipxe.org/...) No more network devices No bootable device. Solution: I havent found pre-installed ubuntu virtual machine image online, so solution is to install it by your self.

  Read the article

• Disable or sleep secondary HDD in Macbook

  - by cpak

  I've done some quick Googling but didn't find an answer. I've put an SSD in my Macbook, and at the same time moved the original HDD to the optical drive bay. I'm running the OS and most of my daily apps off the SDD so the HDD is really just for storing stuff I need now and then. Now I'd like to disable (as in power off or "force sleep") the HDD when I don't need it. Tried unmounting the disk using diskutil unmountDisk but it kept spinning for like 10 minutes. Maybe that's to be expected, but I'd imagined it would stop instantly on unmount. Also, it would be nice to have it disabled by default, and only mount it (= power on) when I need it. Grateful for any input on this!

  Read the article

• How to repair Java in Ubuntu after trying to switch to Java 6 using update-java-alternatives

  - by Kau-Boy

  I tried to switch from Java 5 to Java 6 using the "update-java-alternatives" command like explained on this page: https://help.ubuntu.com/community/Java But afterwards I get the following error when I tried to execute java: root@webserver:~# java Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. I also tried to reinstall the java binaries using "apt-get" but I didn't succeed reinstalling it. I would like to post the "apt-get" errors, but unfortunately I don't know how to print out the error messages in English and not in German. My system is a Ubuntu 8.04 ROOT server.

  Read the article

• Disable static content caching in IIS 7

  - by Lee Richardson

  I'm a developer having what should be a relatively simple problem in IIS 7 on Windows Server 2008 R2. The problem is that IIS 7 is overzealously caching all static content on the server. It's caching all .html and .js content and not noticing when the content changes on disk unless I iisreset. I've tried the following: Deleting the local cache in my browser (I'm 99% positive this is a server caching issue) In IIS Admin in OutputCaching adding an .html extension and unchecking "User mode caching" and unchecking "Kernel-mode caching" In IIS Admin in OutputCaching adding an .html extension and checking "User mode caching" and selecting the radio for "Prevent all caching" In IIS Admin editing Output Cache Feature settings and unchecking "Enable cache" and "Enable kernel cache under OutputCaching. Running "C:\Windows\System32\inetsrv\config\appcmd set config "SharePoint - 80" -section: system.webServer/caching -enabled:false" Looking through applicationHost.config and disabling anything related to caching I could find. Nothing seems to work. I'm getting very frustrated. Can anyone please help?

  Read the article

< Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488  | Next Page >