Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 482/609 | < Previous Page | 478 479 480 481 482 483 484 485 486 487 488 489  | Next Page >

• TFTP Timing Out on Ubuntu VM

  - by valsidalv

  I'm running a Windows 7 PC with VMware installed which has my Ubuntu (10.04 Lucid Lynx). I recently installed a DHCP server and TFTP (Xinet tftpd) using these instructions. I've mapped a network drive so that my Windows has access to all the files in my VM through a 192.x.x.x IP address. I'm trying to throw some custom firmware onto a router. The router has its own built-in TFTP utility that will download the image. It successfully manages to do everything but it is slow because it writes it to flash memory. There is another method that is much quicker because it writes to RAM directly but it must use the TFTP server in Ubuntu. The issue I'm facing is that the Ubuntu TFTP transfer seems to be timing out. The transfer starts but never goes past ~60%. Here's my /etc/xinetd.d/tftp file (similar to a known working config): service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -s /home/user/tftp/ disable = no cps = 300 2 per_source = 60 } I've done some searching but can't find any parameters for this file to control timeout time or number of retries. The last two arguments (cps, per_source) and completely alien to me (can anyone explain). I have a few possible solutions but the easiest would be to get this TFTP server working. Can anyone help? Either with a timeout configuration or maybe even recommend a different TFTP server? Thanks!

  Read the article

• Provisioning DELL servers using only linux tools

  - by Krist van Besien

  We have taken delivery of a bunch off Dell Poweredge Rack servers. Unfortunately when ordering it was neglegted to ask for dhcp to be enabled in the built in iDRAC controlers... So they are all stuck on the same IP address. Which means that I'll have to go to each of them individually and configure a new IP in the console... In the future I want to avoid that. Now Dell proposes to deliver the next batch with auto discovery enabled. As I understand this means that when the machine wakes up for the first time the iDRAC will request a DHCP address. The DHCP server then supposedly also provides a "provisioning" server, that provides it with a username and password, and a configuration to be applied. This would allow us to for example configure things like RAID automatically. However, I can't seem to find a way to set up such a provisioning server that does not involve setting up a windows machine. I want to use Linux tools exclusively. Is there a way to do this? I want to just rack servers, switch them on, and then do everything remotely. And that using only linux tools?

  Read the article

• fail2ban regex working but no action being taken

  - by fpghost

  I have the following snippet of fail2ban configuration on Ubuntu 13.10 server: #jail.conf [apache-getphp] enabled = true port = http,https filter = apache-getphp action = iptables-multiport[name=apache-getphp, port="http,https", protocol=tcp] mail-whois[name=apache-getphp, dest=root] logpath = /srv/apache/log/access.log maxretry = 1 #filter.d/apache-getphp.conf [Definition] failregex = ^<HOST> - - (?:\[[^]]*\] )+\"(GET|POST) /(?i)(PMA|phptest|phpmyadmin|myadmin|mysql|mysqladmin|sqladmin|mypma|admin|xampp|mysqldb|mydb|db|pmadb|phpmyadmin1|phpmyadmin2|cgi-bin) ignoreregex = I know the regex is good, because if I run the test command on my access.log: fail2ban-regex /srv/apache/log/access.log /etc/fail2ban/filter.d/apache-getphp.conf I get a SUCCESS result with multiple hits, and in my log I see entries like 187.192.89.147 - - [13/Apr/2014:11:36:03 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 301 585 "-" "-" 187.192.89.147 - - [13/Apr/2014:11:36:03 +0100] "GET /phpMyAdmin/scripts/setup.php HTTP/1.1" 301 593 "-" "-" Secondly I know email is configured correctly, as each time I service fail2ban restart I get an email for each of the filters stopping/starting. However despite all this no action seems to be taken when one of these requests comes in. No email with whois, and no entries in iptables. What possibly could be preventing fail2ban from taking action? (everything looks in order in fail2ban-client -d and I can see the chains have loaded with iptables -L)

  Read the article

• Do I need to restart my server after editing fstab and mtab?

  - by jaypabs

  I'm just wondering if I need to restart my server after editing fstab and mtab. I changed something in this file manually due to problem with awstats report. I am using ISPConfig 3 with the help of the tutorial from howtoforge. But due to removing/deleting of some account, the configuration of fstab and mtab messed up. I also ask this question at howtoforge forum but until now no one has answered. If you'd like to read my question please visit it here. I tried very hard to fix the problem w/o luck. Update: Here's what happen to my fstab: Before the value was (I omitted the other): /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web1/log none bind,nobootwait 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web2/log none bind,nobootwait 0 0 So I changed it to the correct path: /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web2/log none bind,nobootwait 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web3/log none bind,nobootwait 0 0 I also found mtab to have the same value as above that's why I edited it manually. from: /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web1/log none rw,bind 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web2/log none rw,bind 0 0 to: /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web2/log none rw,bind 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web3/log none rw,bind 0 0 I edited those value because the correct path of mydomain.com and example.com should be under web2 and web3 folder respectively. As of now the log of example.com is pointed to: /var/www/clients/client1/web2/log when it should be: /var/www/clients/client1/web3/log So I am thinking that this is because of fstab and mtab. Please guide me how to point the log correctly to it's default directory. I explain the scenario one by one at this link. to dawud: Based on your example mount -o remount,noexec /var, should I run mount -o remount,noexec /var/log/ispconfig/httpd/example.com?

  Read the article

• Can't connect to EC2 instance Permission denied (publickey)

  - by Assad Ullah

  I got this when I tried to connect my new instace (UBUNTU 12.01 EC2) with my newly generated key sh-3.2# ssh ec2-user@**** -v ****.pem OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug1: Connecting to **** [****] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /var/root/.ssh/id_rsa type -1 debug1: identity file /var/root/.ssh/id_rsa-cert type -1 debug1: identity file /var/root/.ssh/id_dsa type -1 debug1: identity file /var/root/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '****' is known and matches the RSA host key. debug1: Found key in /var/root/.ssh/known_hosts:4 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /var/root/.ssh/id_rsa debug1: Trying private key: /var/root/.ssh/id_dsa debug1: No more authentication methods to try.

  Read the article

• How to convert an MKV to AVI with minimal loss

  - by Linux Jedi

  To convert an MKV to AVI, I do two things. The first thing I do is this: ffmpeg -i filename.mkv -vcodec copy -acodec copy output.avi This converts the MKV to an AVI, but the problem is that the video does not play smoothly for some reason. That's fine, because if I do one more thing it gets fixed: ffmpeg -i output.avi -vcodec mpeg4 -b 4000k -acodec mp2 -ab 320k converted.avi After I do this then the file plays without problem. I had success doing it this way for one file, but then I tried it on another file, and there is a slight, but noticeable loss in video quality. This is the output I get when doing the second step: FFmpeg version 0.6.1, Copyright (c) 2000-2010 the FFmpeg developers built on Dec 29 2010 18:02:10 with gcc 4.2.1 (Apple Inc. build 5664) configuration: libavutil 50.15. 1 / 50.15. 1 libavcodec 52.72. 2 / 52.72. 2 libavformat 52.64. 2 / 52.64. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0.11. 0 / 0.11. 0 Seems stream 0 codec frame rate differs from container frame rate: 359.00 (359/1) -> 29.92 (359/12) Input #0, avi, from 'output.avi': Metadata: ISFT : Lavf52.64.2 Duration: 00:04:17.21, start: 0.000000, bitrate: 3074 kb/s Stream #0.0: Video: mpeg4, yuv420p, 704x480 [PAR 229:189 DAR 5038:2835], 29.92 fps, 29.92 tbr, 29.92 tbn, 359 tbc Stream #0.1: Audio: vorbis, 48000 Hz, stereo, s16 Output #0, avi, to 'nidome_no_kanojo.avi': Metadata: ISFT : Lavf52.64.2 Stream #0.0: Video: mpeg4, yuv420p, 704x480 [PAR 229:189 DAR 5038:2835], q=2-31, 4000 kb/s, 29.92 tbn, 29.92 tbc Stream #0.1: Audio: mp2, 48000 Hz, stereo, s16, 320 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 I just used arbitrarily large settings on the second step and it worked nicely before but not in this case. What settings should I use?

  Read the article

• Juniper’s Network Connect ncsvc on Linux: “host checker failed, error 10”

  - by hfs

  I’m trying to log in to a Juniper VPN with Network Connect from a headless Linux client. I followed the instructions and used the script from http://mad-scientist.us/juniper.html. When running the script with --nogui switch the command that gets finally executed is $HOME/.juniper_networks/network_connect/ncsvc -h HOST -u USER -r REALM -f $HOME/.vpn.default.crt. I get asked for the password, a line “Connecting to…” is printed but then the programm silently stops. When adding -L 5 (most verbose logging) to the command line, these are the last messages printed to the log: dsclient.info state: kStateCacheCleaner (dsclient.cpp:280) dsclient.info --> POST /dana-na/cc/ccupdate.cgi (authenticate.cpp:162) http_connection.para Entering state_start_connection (http_connection.cpp:282) http_connection.para Entering state_continue_connection (http_connection.cpp:299) http_connection.para Entering state_ssl_connect (http_connection.cpp:468) dsssl.para SSL connect ssl=0x833e568/sd=4 connection using cipher RC4-MD5 (DSSSLSock.cpp:656) http_connection.para Returning DSHTTP_COMPLETE from state_ssl_connect (http_connection.cpp:476) DSHttp.debug state_reading_response_body - copying 0 buffered bytes (http_requester.cpp:800) DSHttp.debug state_reading_response_body - recv'd 0 bytes data (http_requester.cpp:833) dsclient.info <-- 200 (authenticate.cpp:194) dsclient.error state host checker failed, error 10 (dsclient.cpp:282) ncapp.error Failed to authenticate with IVE. Error 10 (ncsvc.cpp:197) dsncuiapi.para DsNcUiApi::~DsNcUiApi (dsncuiapi.cpp:72) What does host checker failed mean? How can I find out what it tried to check and what failed? The HostChecker Configuration Guide mentions that a $HOME/.juniper_networks/tncc.jar gets installed on Linux, but my installation contains no such file. From that I concluded that HostChecker is disabled for my VPN on Linux? Are the POST to /dana-na/cc/ccupdate.cgi and “host checker failed” connected or independent? By running the connection over a SSL proxy I found out that the POST data is status=NOTOK (Funny side note: the client of the oh-so-secure VPN does not validate the server’s SSL certificate, so is wide open to MITM attacks…). So it seems that it’s the client that closes the connection and not the server.

  Read the article

• Security implications of adding www-data to /etc/sudoers to run php-cgi as a different user

  - by BMiner

  What I really want to do is allow the 'www-data' user to have the ability to launch php-cgi as another user. I just want to make sure that I fully understand the security implications. The server should support a shared hosting environment where various (possibly untrusted) users have chroot'ed FTP access to the server to store their HTML and PHP files. Then, since PHP scripts can be malicious and read/write others' files, I'd like to ensure that each users' PHP scripts run with the same user permissions for that user (instead of running as www-data). Long story short, I have added the following line to my /etc/sudoers file, and I wanted to run it past the community as a sanity check: www-data ALL = (%www-data) NOPASSWD: /usr/bin/php-cgi This line should only allow www-data to run a command like this (without a password prompt): sudo -u some_user /usr/bin/php-cgi ...where some_user is a user in the group www-data. What are the security implications of this? This should then allow me to modify my Lighttpd configuration like this: fastcgi.server += ( ".php" => (( "bin-path" => "sudo -u some_user /usr/bin/php-cgi", "socket" => "/tmp/php.socket", "max-procs" => 1, "bin-environment" => ( "PHP_FCGI_CHILDREN" => "4", "PHP_FCGI_MAX_REQUESTS" => "10000" ), "bin-copy-environment" => ( "PATH", "SHELL", "USER" ), "broken-scriptfilename" => "enable" )) ) ...allowing me to spawn new FastCGI server instances for each user.

  Read the article

• Enable gzip on Nginx

  - by Rob Wilkerson

  Yes, I know that there are a lot of other questions that seem exactly like this out there. I think I must've looked all of them. Twice. In desparation, I'm adding another in case my specific configuration is the issue. Bear with me. First, the question: What do I need to do to get gzip compression to work? I have an Ubuntu 12.04 server installed running nginx 1.1.19. Nginx was installed with the following packages: nginx nginx-common nginx-full The http block of my nginx.conf looks like this: http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "msie6"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } Both PageSpeed and YSlow are reporting that I need to enable compression. I can see that the request headers indicate Accept-Encoding:gzip,deflate,sdch, but the response headers do not have the corollary Content-Encoding header. I've tried various other config values (gzip_vary on, gzip_http_version 1.0, etc.), but no joy. As far as I know, I can only assume that nginx was compiled with compression support, but if there's any way to verify that, I'd love to know. If anyone sees anything I'm missing or can suggest further debugging, please let me know. I'm no sysadmin and I'm new to Nginx so I've exhausted everything I can think of or have read. Thanks.

  Read the article

• What's next for all of these Microsoft "overlapping" and "enhanced" products ?

  - by indyvoyage

  Recently I attended a road show, organised by MS Gold Partner company in the UK. The products discussed were: SharePoint server (2010 and 2007), Exchange server, Office Communication Server 2007, Exchange hosted services Office Live meeting, Office Communicator, System Center Configuration Manager and Operation Manager, VMware, Windows 7 etc. As Microsoft claims the enhancement in the each product against higher version, I felt that clients are not much interested in all these details. For example Office Communicator, surely they have improved a lot the product and first site all said 'WOW' great product, but nobody wish to pay money for all these extra features. Some argued, they are bogged down by all these increased number of menus. They don't need soft call feature included with mobile call. It apply for all other products as well such as MS office (next what 2 ribbons ?), windows OS and many more. Indeed there must be good features in all these products, but is it worth to spend money and time to update the older system ? Also sometimes these feature will decrease the productivity instead increase it. *So do you think what ever enhancement MS is doing in the products is only for selling purpose, not a real use ?? and I think also keep the developer busy learning the new tools and features. * I am sure some some people here will argue that some people need this sort of features. But I am not talking about NASA or MI5 guys. I am talking of usual businesses and joe public. Any ideas welcome.

  Read the article

• Designing a software based load balancer

  - by Kishore pandey

  Hello to all Server fault users, I am new to this website but have constantly been using the mother website, stackover flow. Well to begin with, i would like to design a load balancer for the organization i am working for. As i am very new to this whole, idea about load balancing and networks. I am finding it very difficult to start my project. I did a lot of research on already existing load balancer and found some(HAPROXY,NGINX) that could solve my problems, but the point is, I am still in a dilemma if they could answer the following requirements of mine: The client and server in my architecture are distributed. The load balancer should take care of the firewall. LB server should balance the load among all servers present in WWW cloud. The LB server should have some sort of configuration file, with the help of which it is possible to configure the servers. Heart beat: With the help of which it would be possible to check if any server is down, if any server is down the request should be passed to some other server. Various load balancing algorithms of the incoming requests. Easy error handling. It should be fairly possible to prioritize the incoming requests. Is there any already available load balncer solution on the market that could satisfy these requirements? If not is there any base code available with the help of which i could develop my own load balncer. If not where should i start from scratch? I am practically new to everything. Any help from a load balancer expert is very much appreciated. Thanx a ton in advance. Cheers and regards. Kishore

  Read the article

• fedora, dhcpd fails to start

  - by soxs060389

  History: I got a tiny shiny plugserver which I want to plug to my ADSL router (or however you want to call it) on one end (eth0), and the other end (eth1) I want to run a dhcp server for my LAN. ATM I am stuck with getting LAN to work. OS is fedora 12. I configured my /etc/dhcp/dhcpd.conf like this: # # DHCP Server Configuration file. # see /usr/share/doc/dhcp*/dhcpd.conf.sample # see 'man 5 dhcpd.conf' # option domain-name "unknown.org"; option domain-name-servers 192.168.44.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.44.255; default-lease-time 86400; max-lease-time 172800; subnet 192.168.44.0 netmask 255.255.255.0 { host fedorabigbox { hardware ethernet 00:19:66:8E:61:74; fixed-address 192.168.44.21; } #host mobile #{ # hardware ethernet ***; # fixed-address 192.168.44.22; #} range 192.168.44.100 192.168.44.110; option routers 192.168.44.1; } # this is just dummy, as read many howtos, some suggesting to add a subnet blah netmask blah for each interface subnet 192.168.33.0 netmask 255.255.255.0 { range 192.168.33.100 192.168.33.110; option routers 192.168.33.1; } But the server fails to start when trying to start it via /etc/init.d/dhcpd start In general it would be nice if someone can point me to a in detail explanation of how network works, I am pretty new to this stuff. More concrete question: How to point the subnets to eth1 and the other to eth0, how can this be achieved? Does someone see any errors or flaws? Syntax should be correct, allready checked that with the dhcpd syntax check. Thanks for any help

  Read the article

• rsnapshot - not correctly archiving mysql databases

  - by Tiffany Walker

  My rsnapshot configuration: snapshot_root /.snapshots/ backup /home/user localhost/ backup_script /usr/local/backup_mysql.sh localhost/mysql/ Using this file: NOW=$(date +"%m-%d-%Y") # mm-dd-yyyy format FILE="" # used in a loop ### Server Setup ### #* MySQL login user name *# MUSER="root" #* MySQL login PASSWORD name *# MPASS="YOUR-PASSWORD" #* MySQL login HOST name *# MHOST="127.0.0.1" #* MySQL binaries *# MYSQL="$(which mysql)" MYSQLDUMP="$(which mysqldump)" GZIP="$(which gzip)" # get all database listing DBS="$($MYSQL -u $MUSER -h $MHOST -p$MPASS -Bse 'show databases')" # start to dump database one by one for db in $DBS do FILE=$BAK/mysql-$db.$NOW-$(date +"%T").gz # gzip compression for each backup file $MYSQLDUMP --single-transaction -u $MUSER -h $MHOST -p$MPASS $db | $GZIP -9 > $FILE done It dumps the databases under / I then tried with the following: http://bash.cyberciti.biz/backup/rsnapshot-remote-mysql-backup-shell-script/ I got: rsnapshot hourly ---------------------------------------------------------------------------- rsnapshot encountered an error! The program was invoked with these options: /usr/bin/rsnapshot hourly ---------------------------------------------------------------------------- ERROR: backup_script /usr/local/backup_mysql.sh returned 1 WARNING: Rolling back "localhost/mysql/" ls -la /.snapshots/hourly.0/localhost/mysql total 8 drwxr-xr-x 2 root root 4096 Nov 23 17:43 ./ drwxr-xr-x 4 root root 4096 Nov 23 18:20 ../ What exactly am I doing wrong? EDIT: # /usr/local/backup_mysql.sh *** Dumping MySQL Database *** Database> information_schema..cphulkd..eximstats..horde..leechprotect..logaholicDB_ns1..modsec..mysql..performance_schema..roundcube..test.. *** Backup done [ files wrote to /.snapshots/tmp/mysql] *** root@ns1 [~]# ls -la /.snapshots/tmp/mysql total 8040 drwxr-xr-x 2 root root 4096 Nov 23 18:41 ./ drwxr-xr-x 3 root root 4096 Nov 23 18:41 ../ -rw-r--r-- 1 root root 1409 Nov 23 18:41 cphulkd.18_41_45pm.gz -rw-r--r-- 1 root root 113522 Nov 23 18:41 eximstats.18_41_45pm.gz -rw-r--r-- 1 root root 4583 Nov 23 18:41 horde.18_41_45pm.gz -rw-r--r-- 1 root root 71757 Nov 23 18:41 information_schema.18_41_45pm.gz -rw-r--r-- 1 root root 692 Nov 23 18:41 leechprotect.18_41_45pm.gz -rw-r--r-- 1 root root 2603 Nov 23 18:41 logaholicDB_ns1.18_41_45pm.gz -rw-r--r-- 1 root root 745 Nov 23 18:41 modsec.18_41_45pm.gz -rw-r--r-- 1 root root 138928 Nov 23 18:41 mysql.18_41_45pm.gz -rw-r--r-- 1 root root 1831 Nov 23 18:41 performance_schema.18_41_45pm.gz -rw-r--r-- 1 root root 3610 Nov 23 18:41 roundcube.18_41_45pm.gz -rw-r--r-- 1 root root 436 Nov 23 18:41 test.18_41_47pm.gz MySQL Backup seems fine.

  Read the article

• cURL - Unkown SSL protocol error - OS X 10.9

  - by saq7

  I am trying to use cURL and get the following error on every https request I make. The error is always the same. HTTP requests work flawlessly. The verbose output is quite useless. Saquibs-MacBook-Pro:~ skothawala$ curl https://google.com -vv * Adding handle: conn: 0x7fe09b803a00 * Adding handle: send: 0 * Adding handle: recv: 0 * Curl_addHandleToPipeline: length: 1 * - Conn 0 (0x7fe09b803a00) send_pipe: 1, recv_pipe: 0 * About to connect() to google.com port 443 (#0) * Trying 74.125.226.129... * Connected to google.com (74.125.226.129) port 443 (#0) * Unknown SSL protocol error in connection to google.com:-9805 * Closing connection 0 curl: (35) Unknown SSL protocol error in connection to google.com:-9805 I have looked through other answers on this forum and other places on the internet, but haven't found an answer. Most people's issues involve particular servers and the configuration of SSL on these servers. Mine however is problematic anytime HTTPS is used (with any website). Can someone please suggest what I should be looking into to solve the problem? Can it be that something is not properly configured? What should I be looking for?

  Read the article

• Setting up port forwarding for web server

  - by reyjavikvi

  This could belong on Super User, but I thought this place was more appropiate. I want to run Apache in my computer and want to make it available to the outside world to test a couple things. Apparently, I have to go into my router's (a TP-LINK TD 8910G) settings and forward port 80 to my PC's IP. So far so good. Thing is, since the router uses a web based interface and it's kind of stupid, it told me that since I was using port 80 for this, I should access its settings through port 8080. Maybe it can't detect requests coming from the LAN, I don't know. Point is, now neither port can't access the configuration, and I can't access Internet. Specifically, trying to access anything (including 192.168.1.1, the router's settings) through port 80 turns up a blank page (maybe if I had the server running in my computer I'd get something, but I don't want to risk trying, I had to reset the router and restore the settings), and port 8080 gives a "Can't establish connection" error in Firefox (and similar ones in other browsers). Is there a way to configure the router to not redirect requests coming from inside the network? I'm a beginner with this stuff, so please try to explain in a simple way. If this is more appropiate in Super User, I'm sorry.

  Read the article

• DVD drive won't work after installing software

  - by Dan

  DVD drive was already region-free but for some reason would not play a certain DVD as it was the "wrong region". This is the first time I've played a DVD on the drive, but I've imported a lot of CDs before and they always worked fine, even CDs bought from the USA (I live in the UK). To get around this, I downloaded a piece of software called "DVD Region Killer". (Clicking the link won't start the download, so go ahead and check it.) After this, the drive isn't recognised. It won't show up in "My Computer", and when I insert a disc it will start to whir but not take action, i.e. iTunes won't recognise that I have put a CD in. In the Device Manager, the drive shows up with a caution-sign. The device status reads: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Disabling, uninstalling and reinstalling does not help. Clearly the software download is the issue, but it is difficult to remove. The only files I can find in Program Files are: C:\Program Files (x86)\Elaborate Bytes\DVD Region Killer which contains a changelog and a HTML document which has no info on uninstalling. It doesn't show up on "Add or Remove Programs", or even as a background process when I press ctrl-alt-del. Apparently it has no interface as such, and can be accessed by an icon in the system tray, (see review in link) but I don't see the icon. If it helps to know, I have a Dell Inspiron running Windows 8 64-bit, and the model of the DVD drive is: MATSHITA DVD+-RW UJ8C2 Thanks in advance.

  Read the article

• How to diagnose remote assistance problem

  - by cantabilesoftware

  I have a long standing issue with remote assistance between a home and work PC. My wife and I both use MSN messenger and I used to be able to control her PC at home via MSN Remote Assistance. Some time ago however this stopped working and I don't know why. We're both running the latest versions of MSN Live Messenger and I've checked the appropriate firewall ports are open, but it still doesn't work and MSN just says something useless like "The person isn't responding". Any suggestions for how can I diagnose this? More info: I just tried direct Remote Desktop between work PC and home PC and it works fine - so I presume all the appropriate ports are open. Just Remote Assistance doesn't work. I'd like to get RA working so I can demonstrate how to do things remotely. With Remote Desktop the person at the other end gets booted off and can't see. With Remote Assistance they can follow along step by step. Some comments below suggest using other solutions, which is fine and do work, but there must be a way to diagnose RA and get it working. Experimenting with this some more, the notebook that I was using at work today that refused to connect works fine for remote assistance when I bring it home. So I guess this must be a problem with our network configuration at work. I've checked that 3389 is open on firewall on office router and remote desktop works both ways.... just not remote assistance. I've read that remote assitance won't work if client and server are both behind Non-UPnP/NAT routers. If one has UPnP it's supposed to work. Office router doesn't have UPnP enabled but my home one does. I've also scoured the event logs on both ends, nothing noteworthy - unless I'm looking in the wrong spot). Note (copied from comment): I've just tried ShowMyPC which is based on VNC and it works, but I'd still like to figure out what's wrong with RA - it's just bugging me. The question is only about Remote Assistance, no need to propose solutions based on other programs.[/edit by Gnoupi]

  Read the article

• Better logging for cronjob output using /usr/bin/logger

  - by Stefan Lasiewski

  I am looking for a better way to log cronjobs. Most cronjobs tend to spam email or the console, get ignored, or create yet another logfile. In this case, I have a Nagios NSCA script which sends data to a central Nagios sever. This send_nsca script also prints a single status line to STDOUT, indicating success or failure. 0 * * * * root /usr/local/nagios/sbin/nsca_check_disk This emails the following message to root@localhost, which is then forwarded to my team of sysadmins. Spam. forwarded nsca_check_disk: 1 data packet(s) sent to host successfully. I'm looking for a log method which: Doesn't spam the messages to email or the console Don't create yet another krufty logfile which requires cleanup months or years later. Capture the log information somewhere, so it can be viewed later if desired. Works on most unixes Fits into an existing log infrastructure. Uses common syslog conventions like 'facility' Some of these are third party scripts, and don't always do logging internally. UPDATE 2010-04-30 In the process of writing this question, I think I have answered myself. So I'll answer myself "Jeopardy-style". Is there any problem with this method? The following will send any Cron output to /usr/bin//logger, which will send to syslog, with a 'tag' of 'nsca_check_disk'. Syslog handles it from there. My systems (CentOS and FreeBSD) already handle log rotation. */5 * * * * root /usr/local/nagios/sbin/nsca_check_disk 2>&1 |/usr/bin/logger -t nsca_check_disk /var/log/messages now has one additional message which says this: Apr 29, 17:40:00 192.168.6.19 nsca_check_disk: 1 data packet(s) sent to host successfully. I like /usr/bin/logger , because it works well with an existing syslog configuration and infrastructure, and is included with most Unix distros. Most *nix distributions already do logrotation, and do it well.

  Read the article

• OpenOffice Calc: How can I count the number of different items with data pilot?

  - by manu

  Hi all, I have a rather long spreadsheet with historical information of issues solved by some user on a collaborative environment. The spreadsheet have the following (relevant) columns date, week no., project, author id, etc... The week no. is calculated from the date, is basically the year concatenated with the week number within that year; for instance, both 2009-02-18 and 2009-02-20 yield the week number 200908 - the 8th week of year 2009; and 2009-02-23 yields 200909 - the 9th week of year 2009. I need to count how many different users (given by author id) contributed to some project, on a weekly basis. I have setup a data pilot with the week as Row Field, the project as the Column Field, and count-author as the Data Field. However, this counts the author id as different instances. This is not what I need. I need to count how many different users contributed to each project on a weekly basis. I expect to get something like: projects week Project1 Project2 Project3 200901 10 2 200902 2 7 Each inner cell containing how many different users contributed. With the count-author configuration, what I get is how many contributions (total) got the project on that week. Is there a way to tell OpenOffice Calc to do what I want?

  Read the article

• mysqld crashes on any statement

  - by ??iu

  I restarted my slave to change configuration settings to skip reverse hostname lookup on connecting and to enable the slow query log. I edited /etc/my.cnf making only these changes, then restarted mysqld with /etc/init.d/mysql restart All appeared to be well but when I connect to msyqld remotely or locally though it connects okay a slight problem is that mysqld crashes whenever you try to issue any kind of statement. The client looks like: Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 Server version: 5.1.31-1ubuntu2-log Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> show tables; ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... Connection id: 1 Current database: mydb ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away Bus error The mysqld error log looks like: 101210 16:35:51 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:35:51 InnoDB: Assertion failure in thread 140245598570832 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:35:51 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=3 max_threads=600 threads_connected=3 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18209220 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f8d791580d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f902a76a080] /lib/libc.so.6(gsignal+0x35) [0x7f90291f8fb5] /lib/libc.so.6(abort+0x183) [0x7f90291fabc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f902a7623ba] /lib/libc.so.6(clone+0x6d) [0x7f90292abfcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18213c70 = thd->thread_id=3 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:35:51 mysqld_safe Number of processes running now: 0 101210 16:35:51 mysqld_safe mysqld restarted InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 101210 16:35:54 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 101210 16:35:56 InnoDB: Started; log sequence number 456 143528628 101210 16:35:56 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 16:35:56 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 16:35:56 [Note] Event Scheduler: Loaded 0 events 101210 16:35:56 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 16:36:11 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:36:11 InnoDB: Assertion failure in thread 139955151501648 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:36:11 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18588720 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f49d916f0d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f4c8a73f080] /lib/libc.so.6(gsignal+0x35) [0x7f4c891cdfb5] /lib/libc.so.6(abort+0x183) [0x7f4c891cfbc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f4c8a7373ba] /lib/libc.so.6(clone+0x6d) [0x7f4c89280fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18599950 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:36:11 mysqld_safe Number of processes running now: 0 101210 16:36:11 mysqld_safe mysqld restarted The config is [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] innodb_file_per_table innodb_buffer_pool_size=10G innodb_log_buffer_size=4M innodb_flush_log_at_trx_commit=2 innodb_thread_concurrency=8 skip-slave-start server-id=3 # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /DB2/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 128K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 600 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M # skip-federated slow-query-log skip-name-resolve Update: I followed the instructions as per http://dev.mysql.com/doc/refman/5.1/en/forcing-innodb-recovery.html and set innodb_force_recovery = 4 and the logs are showing a different error but the behavior is still the same: 101210 19:14:15 mysqld_safe mysqld restarted 101210 19:14:19 InnoDB: Started; log sequence number 456 143528628 InnoDB: !!! innodb_force_recovery is set to 4 !!! 101210 19:14:19 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 19:14:19 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 19:14:19 [Note] Event Scheduler: Loaded 0 events 101210 19:14:19 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 19:14:32 InnoDB: error: space object of table mydb/__twitter_friend, InnoDB: space id 1602 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/access_request, InnoDB: space id 1318 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/activity, InnoDB: space id 1595 did not exist in memory. Retrying an open. 101210 19:14:32 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x1753c070 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f7a0b5800d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f7cbc350080] /usr/sbin/mysqld(ha_innobase::innobase_get_index(unsigned int)+0x46) [0x77c516] /usr/sbin/mysqld(ha_innobase::innobase_initialize_autoinc()+0x40) [0x77c640] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x3f3) [0x781f23] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f7cbc3483ba] /lib/libc.so.6(clone+0x6d) [0x7f7cbae91fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x1754d690 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash.

  Read the article

• How important is dual-gigabit lan for a super user's home NAS?

  - by Andrew

  Long story short: I'm building my own home server based on Ubuntu with 4 drives in RAID 10. Its primary purpose will be NAS and backup. Would I be making a terrible mistake by building a NAS Server with a single Gigabit NIC? Long story long: I know the absolute max I can get out of a single Gigabit port is 125MB/s, and I want this NAS to be able to handle up to 6 computers accessing files simultaneously, with up to two of them streaming video. With Ubuntu NIC-bonding and the performance of RAID 10, I can theoretically double my throughput and achieve 250MB/s (ok, not really, but it would be faster). The drives have an average read throughput of 83.87MB/s according to Tom's Hardware. The unit itself will be based on the Chenbro ES34069-BK-180 case. With my current hardware choices, it'll have this motherboard with a Core i3 CPU and 8GB of RAM. Overkill, I know, but this server will be doing other things as well (like transcoding video). Unfortunately, the only Mini-ITX boards I can find with dual-gigabit and 6 SATA ports are Intel Atom-based, and I need more processing power than an Atom has to offer. I would love to find a board with 6 SATA ports and two Gigabit LAN ports that supports a Core i3 CPU. So far, my search has come up empty. Thus, my dilemma. Should I hold out for such a board, go with an Atom-based solution, or stick with my current single-gigabit configuration? I know there are consumer NAS units with just one gigabit interface (probably most of them), but I think I will demand a lot more from my server than the average home user. Any advice is appreciated. Thanks.

  Read the article

• VPN Setup: Mac OS X and SonicWall

  - by noloader

  I'm trying to get VPN access up and running. The company has a SonicWall firewall/concentrator and I'm working on a Mac. I'm not sure of the SonicWall's hardware or software level. My MacBook Pro is OS X 10.8, x64, fully patched. The Mac Networking applet claims the remote server is not responding. The connection attempt subsequently fails: This is utter bullshit, as a Wireshark trace shows the Protected Mode negotiation, and then the fallback to Quick Mode: I have two questions (1) does Mac OS X VPN work in real life? (2) Are there any trustworthy (non-Apple) tools to test and diagnose the connection problem (Wireshark is a cannon and I have to interpret the results)? And a third question (off topic): what is broken in Cupertino such that so much broken software gets past their QA department? EDIT (12/14/2012): The network guy sent me "VPN Configuration Guide" (Equinox document SonicOS_Standard-6-EN). It seems an IPSec VPN now requires a Firewall Unique Identifier. Just to be sure, I revisited RFC 2409, where Main Mode, Aggressive Mode, and Quick Mode are discussed. I cannot find a reference to Firewall Unique Identifier. I think I am screwed here: I am trying to connect to a broken (non-standard) firewall, with a broken Mac OS X client. Fortunately, I can purchase VPN Tracker Personal (a {SonicWall|Equinox}-authored client) for $129US from Equinox. So much for standards....

  Read the article

• Share Firefox/Thnderbird data between W7 and Linux Mint 12 in dual boot computer

  - by Albert

  I've just set up my laptop (where I had running only W7) with a dual boot to run Linux Mint 12 as well. I have a "Data" partition (apart from the required partitions for W7 and Linux) where I store pretty much everything that isn't software installations (music, videos, project files, etc). I seem to be able to access that NTFS partition totally fine from Mint (like I've always done with W7), which is cool because I can access all that stuff regardless of which OS I'm using. I would like to know if it's possible (and how) to go one step further and share programs data between the two OS. One example would be my Firefox and Thunderbird data. For example, in Firefox share my bookmarks (and if I could share history, autocomplete and all that stuff, that would be awesome). In thunderbird, be able to share my mail and configuration, seeing the same inbox, folders, message rules, etc... So if I receive/send an email from W7 and later switch to Mint, I can see that email as it had been received/sent from Mint, and vice versa. Is this even possible? Or am I asking for too much convenience? If it's possible, any clues on how to set it all up?

  Read the article

• Can't upgrade NVIDIA GeForce 310M display driver on Acer Aspire 5745PG

  - by Emerson

  I've been for days already trying to update my video driver. I have an Acer Aspire 5745PG with a "NVIDIA GeForce 310M" board, and I was trying to run Sony Vegas video editor with Boris Continunn plugins. It happened that some of the plugins, like BCC Text Extrude wouldn't work, showing the message "Insufficient depth resolution to run Blue". I then read somewhere that updating the display driver would do the trick. That was when my nightmares started, I lost already good 3 nights trying to sort this out, without success :( The display driver that was before (and that I current have after restoring) was the version 8.16.11.8997. First thing I tried was downloading the 8.17.12.6619 driver directly from Acer, which was shown as the latest version from Acer website: http://support.acer.com/product/default.aspx?modelId=2466 Running it would say "Diver Package Failure - Setup failed to read the required Display Driver to be used with this package" I then tried directly the NVIDIA own driver, which the latest was version 296.10: http://us.download.nvidia.com/Windows/296.10/296.10-notebook-win7-winvista-64bit-international-whql.exe That gave me similar error message :/ So after some researching I found out that some people had the same issue and they had to change the configuration file to allow the installer to recognize this NVIDIA board: http://forums.nvidia.com/index.php?showtopic=222904 That topic said to look for the "Device Instance Id" property of the "NVIDIA GeForce 310M" display , which I couldn't find, instead I found the "Hardware Id", which seemed to be the right one. I followed the instructions and changed the inf file first for the Acer installation, and after for the NVIDIA own driver. It actually managed to go ahead with the installation in both instances, but the only thing I got was a black screen, while the computer still apeared to be running fine. I had to hard reset, and then it would come back with generic vga driver. I could only get my display back using the recovery function. I imagine thousands of this notebook was sold, and it can't have its driver updated?? Could someone help me with this?? Thanks Echo

  Read the article

• Route through site-to-site VPN not working

  - by Jonathan

  I'm trying to set up a site-to-site VPN using RRAS on two 2K8r2 servers since yesterday. The connection is working at this point, but I can't get it to send traffic from one site to the other one. Set up: the set up is the same on both sites: the server is connected to a router that's connected to a modem. The routers act like a DHCP-server and assign IP addresses from the range subnet.21-subnet-.100. Both servers use a static IP address, subnet.11, and are set up as DMZ. Configuration: the servers are configured using the wizard to set up a site-to-site connection. This works with a demand-dial interface and a PPTP VPN connection. As mentioned, the VPN connection work properly. Problem: I can't get the servers to send the traffic for the other site, to be sent through the VPN connection. I added a static route on both server (home, office 1) and I can see the result in the IP routing table (home, office 1). I did this because the route didn't show up automatically. My guess is that this last step isn't right, for example because the routing table states "non demand-dial", which seems not correct. Home: Subnet: 10.0.1.0/24 Router: 10.0.1.1 Server: 10.0.1.11 (DMZ) DHCP: 10.0.1.21-10.0.1.100 RRAS DHCP: 10.0.1.101-10.0.1.150 Office 1: Subnet: 10.0.2.0/24 Router: 10.0.2.1 Server: 10.0.2.11 (DMZ) DHCP: 10.0.2.21-10.0.2.100 RRAS DHCP: 10.0.2.101-10.0.2.150 I hope someone has an idea to get this route working!

  Read the article

< Previous Page | 478 479 480 481 482 483 484 485 486 487 488 489  | Next Page >