control characters - Page 483

Path is too long

- by kaleidoscope

Bugged by the irritating "Path is too long after being fully qualified" error while running in the Development Fabric? The solution is pretty funny and not so obvious unfortunately. The culprit here is not your app, but the Development Fabric. The DevFab accumulates a lot of temporary junk comprising of local storage locations, cached binaries, configuration, diagnostics information and cached compiled web site content files over its lifetime. They are typically stored at C:\Users\<username>\AppData\Local\dftmp. The Azure Tools will periodically clean this up, but some time you have to play janitor and take the law in your hands ;). The csrun.exe has quite a few tricks up its sleeve. One of them is the ability to clean the development fabric's temporary junk accumulated over time. You can do this by running the Azure command prompt with elevated privileges and running csrun.exe /devfabric:shutdown and then csrun.exe /devfabric:clean If the problem still persists then the application directory structure could indeed be too long. A workaround to this is changing the Development Fabric temporary directory to point to a shorter path. The temporary directory path can be addressed by an environment variable _CSRUN_STATE_DIRECTORY. You can try setting its value to something like "C:\WA" or "C:\A" this will reduce some 25+ characters from your path. Do not forget to close Visual Studio and expressly shutdown the dev fab with csrun.exe /devfabric:shutdown (Under elevated privileges of course). Source: http://geekswithblogs.net/IUnknown/archive/2010/02/03/no-more-path-is-too-long.aspx :D Sarang, K

Read the article

Integrating Twitter Into An ASP.NET Website

Twitter is a popular social networking web service for writing and sharing short messages. These tidy text messages are referred to as tweets and are limited to 140 characters. Users can leave tweets and follow other users directly from Twitter's website or by using the Twitter API. Twitter's API makes it possible to integrate Twitter with external applications. For example, you can use the Twitter API to display your latest tweets on your blog. A mom and pop online store could integrate Twitter such that a new tweet was added each time a customer completed an order. And ELMAH, a popular open-source error logging library, can be configured to send error notifications to Twitter. Twitter's API is implemented over HTTP using the design principles of Representational State Transfer (REST). In a nutshell, inter-operating with the Twitter API involves a client - your application - sending an XML-formatted message over HTTP to the server - Twitter's website. The server responds with an XML-formatted message that contains status information and data. While you can certainly interface with this API by writing your own code to communicate with the Twitter API over HTTP along with the code that creates and parses the XML payloads exchanged between the client and server, such work is unnecessary since there are many community-created Twitter API libraries for a variety of programming frameworks. This article shows how to integrate Twitter with an ASP.NET website using the Twitterizer library, which is a free, open-source .NET library for working with the Twitter API. Specifically, this article shows how to retrieve your latest tweets and how to post a tweet using Twitterizer. Read on to learn more! Read More >

Read the article

How to Sync Any Browser’s Bookmarks With Your iPad or iPhone

- by Chris Hoffman

Apple makes it easy to synchronize bookmarks between the Safari browser on a Mac and the Safari browser on iOS, but you don’t have to use Safari — or a Mac — to sync your bookmarks back and forth. You can do this with any browser. Whether you’re using Chrome, Firefox, or even Internet Explorer, there’s a way to sync your browser bookmarks so you can access your same bookmarks on your iPad. Safari on a Mac Apple’s iCloud service is the officially supported way to sync data with your iPad or iPhone. It’s included on Macs, but Apple also offers similar iCloud bookmark syncing features for Windows. On a Mac, this should be enabled by default. To check whether it’s enabled, you can launch the System Preferences panel on your Mac, open the iCloud preferences panel, and ensure the Safari option is checked. If you’re using Safari on Windows — well, you shouldn’t be. Apple is no longer updating Safari for Windows. iCloud allows you to synchronize bookmarks between other browsers on your Windows system and Safari on your iOS device, so Safari isn’t necessary. Internet Explorer, Firefox, or Chrome via iCloud To get started, download Apple’s iCloud Control Panel application for Windows and install it. Launch the iCloud Control Panel and log in with the same iCloud account (Apple ID) you use on your iPad or iPhone. You’ll be able to enable Bookmark syncing with Internet Explorer, Firefox, or Chrome. Click the Options button to select the browser you want to synchronize bookmarks with. (Note that bookmarks are called “favorites” in Internet Explorer.) You’ll be able to access your synced bookmarks in the Safari browser on your iPad or iPhone, and they’ll sync back and forth automatically over the Internet. Google Chrome Sync Google Chrome also has its own built-in sync feature and Google provides an official Chrome app for iPad and iPhone. If you’re a Chrome user, you can set up Chrome Sync on your desktop version of Chrome — you should already have this enabled if you have logged into your Chrome browser. You can check if this Chrome Sync is enabled by opening Chrome’s settings screen and seeing whether you’re signed in. Click the Advanced sync settings button and ensure bookmark syncing is enabled. Once you have Chrome Sync set up, you can install the Chrome app from the App Store and sign in with the same Google account. Your bookmarks, as well as other data like your open browser tabs, will automatically sync. This can be a better solution because the Chrome browser is available for so many platforms and you gain the ability to synchronize other browser data, such as your open browser tabs, between your devices. Unfortunately, the Chrome browser is slower than Apple’s own Safari browser on iPad and iPhone because of the way Apple limits third-party browsers, so using it involves a trade-off. Manual Bookmark Sync in iTunes iTunes also allows you to sync bookmarks between your computer and your iPad or iPhone. It does this the old-fashioned way, by initiating a manual sync when your device is plugged in via USB. To access this option, connect your device to your computer, select the device in iTunes, and click the Info tab. This is the more outdated way of synchronizing your bookmarks. This feature may be useful if you want to create a one-time copy of your bookmarks from your PC, but it’s nowhere near ideal for regular syncing. You don’t have to use this feature, just as you really don’t have to use iTunes anymore. In fact, this option is unavailable if you’ve set up iCloud syncing in iTunes. After you set up bookmark syncing via iCloud or Chrome Sync, bookmarks will sync immediately after you save, remove, or edit them.

Read the article

What's new in ASP.Net 4.5 and VS 2012 - part 2

- by nikolaosk

This is the second post in a series of posts titled "What's new in ASP.Net 4.5 and VS 2012".You can have a look at the first post in this series, here. Please find all my posts regarding VS 2012, here. In this post I will be looking into the various new features available in ASP.Net 4.5 and VS 2012.I will be looking into the enhancements in the HTML Editor,CSS Editor and Javascript Editor.In order to follow along this post you must have Visual Studio 2012 and .Net Framework 4.5 installed in your machine.Download and install VS 2012 using this link.My machine runs on Windows 8 and Visual Studio 2012 works just fine.I will work fine in Windows 7 as well so do not worry if you do not have the latest Microsoft operating system.1) Launch VS 2012 and create a new Web Forms application by going to File - >New Web Site - > ASP.Net Web Forms Site.2) Choose an appropriate name for your web site.3) I would like to point out the new enhancements in the CSS editor in VS 2012. In the Solution Explorer in the Content folder and open the Site.cssThen when I try to change the background-color property of the html element, I get a brand new handy color-picker. Have a look at the picture below Please note that the color-picker shows all the colors that have been used in this website. Then you can expand the color-picker by clicking on the arrows. Opacity is also supported. Have a look at the picture below4) There are also mobile styles in the Site.css .These are based on media queries.Please have a look at another post of mine on CSS3 media queries. Have a look at the picture below In this case when the maximum width of the screen is less than 850px there will be a new layout that will be dictated by these new rules. Also CSS snippets are supported. Have a look at the picture below I am writing a new CSS rule for an image element. I write the property transform and hit tab and then I have cross-browser CSS handling all of the major vendors.Then I simply add the value rotate and it is applied to all the cross browser options.Have a look at the picture below. I am sure you realise how productive you can become with all these CSS snippets. 5) Now let's have a look at the new HTML editor enhancements in VS 2012You can drag and drop a GridView web server control from the Toolbox in the Site.master file.You will see a smart tag (that was only available in the Design View) that you can expand and add fields, format the web server control.Have a look at the picture below 6) We also have available code snippets. I type <video and then press tab twice.By doing that I have the rest of the HTML 5 markup completed.Have a look at the picture below 7) I have new support for the input tag including all the HTML 5 types and all the new accessibility features.Have a look at the picture below 8) Another interesting feature is the new Intellisense capabilities. When I change the DocType to 4.01 and the type <audio>,<video> HTML 5 tags, Intellisense does not recognise them and add squiggly lines.Have a look at the picture below All these features support ASP.Net Web forms, ASP.Net MVC applications and Web Pages. 9) Finally I would like to show you the enhanced support that we have for Javascript in VS 2012. I have full Intellisense support and code snippets support.I create a sample javascript file. I type If and press tab. I type while and press tab.I type for and press tab.In all three cases code snippet support kicks in and completes the code stack. Have a look at the picture below We also have full Intellisense support.Have a look at the picture below I am creating a simple function and then type some sort of XML like comments for the input parameters. Have a look at the picture below. Then when I call this function, Intellisense has picked up the XML comments and shows the variables data types.Have a look at the picture below Hope it helps!!!

Read the article

Oracle SQL Developer version 3.2.2 Released

- by thatjeffsmith

This is another maintenance release, but I don’t want to minimize the work done in either the 3.2.1 or the 3.2.2 editions. The two releases include more than 400 bug fixes. Version 3.2 should be rocking and rolling and good to go while we work on the next major release! You can find the downloads and bug fixes in the normal places: Download 3.2.2 Bug fixes Connection Names If you downloaded and used version 3.2.1 and noticed some of your connection names were no longer valid due to ‘special’ characters, we’ve loosed our restrictions a bit for 3.2.2. You can now go back to using spaces and hyphens in your connection names. periods, spaces, hyphens should now all work More Copy & Paste Stuff While fixing a bug, the developer decided to also enhance the feature while he was in the code. I love seeing this happen organically. No one is sitting over their shoulder with the red magic marker. No, I’m too far away to do that except on very special days So here’s a ‘trick’ – if you want to copy cells from your grids, just drag the selected cells to the worksheet/editor. You’ll get a comma delimited list – very handy! Select cells, drag and drop up to the worksheet – Voila! Comma separated values

Read the article

SQL Server – SafePeak “Logon Trigger” Feature for Managing Data Access

- by pinaldave

Lately I received an interesting question about the abilities of SafePeak for SQL Server acceleration software: Q: “I would like to use SafePeak to make my CRM application faster. It is an application we bought from some vendor, after a while it became slow and we can’t reprogram it. SafePeak automated caching sounds like an easy and good solution for us. But, in my application there are many servers and different other applications services that address its main database, and some even change data, and I feel that there is a chance that some servers that during the connection process we may miss some. Is there a way to ensure that SafePeak will be aware of all connections to the SQL Server, so its cache will remain intact?” Interesting question, as I remember that SafePeak (http://www.safepeak.com/Product/SafePeak-Overview) likes that all traffic to the database will go thru it. I decided to check out the features of SafePeak latest version (2.1) and seek for an answer there. A: Indeed I found SafePeak has a feature they call “Logon Trigger” and is designed for that purpose. It is located in the user interface, under: Settings -> SQL instances management -> [your instance] -> [Logon Trigger] tab. From here you activate / deactivate it and control a white-list of enabled server IPs and Login names that SafePeak will ignore them. Click to Enlarge After activation of the “logon trigger” Safepeak server is notified by the SQL Server itself on each new opened connection. Safepeak monitors those connections and decides if there is something to do with them or not. On a typical installation SafePeak likes all application and users connections to go via SafePeak – this way it knows about data and schema updates immediately (real time). With activation of the safepeak “logon trigger” a special CLR trigger is deployed on the SQL server and notifies Safepeak on any connection that has not arrived via SafePeak. In such cases Safepeak can act to clear and lock the cache or to ignore it. This feature enables to make sure SafePeak will be aware of all connections so SafePeak cache will maintain exactly correct all times. So even if a user, like a DBA will connect to the SQL Server not via SafePeak, SafePeak will know about it and take actions. The notification does not impact the work of that connection, the user or application still continue to do whatever they planned to do. Note: I found that activation of logon trigger in SafePeak requires that SafePeak SQL login will have the next permissions: 1) CONTROL SERVER; 2) VIEW SERVER STATE; 3) And the SQL Server instance is CLR enabled; Seeing SafePeak in action, I can say SafePeak brings fantastic resource for those who seek to get performance for SQL Server critical apps. SafePeak promises to accelerate SQL Server applications in just several hours of installation, automatic learning and some optimization configuration (no code changes!!!). If better application and database performance means better business to you – I suggest you to download and try SafePeak. The solution of SafePeak is indeed unique, and the questions I receive are very interesting. Have any more questions on SafePeak? Please leave your question as a comment and I will try to get an answer for you. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Extracting the Date from a DateTime in Entity Framework 4 and LINQ

- by Ken Cox [MVP]

In my current ASP.NET 4 project, I’m displaying dates in a GridDateTimeColumn of Telerik’s ASP.NET Radgrid control. I don’t care about the time stuff, so my DataFormatString shows only the date bits: <telerik:GridDateTimeColumn FilterControlWidth="100px" DataField="DateCreated" HeaderText="Created" SortExpression="DateCreated" ReadOnly="True" UniqueName="DateCreated" PickerType="DatePicker" DataFormatString="{0:dd MMM yy}"> My problem was that I couldn’t get the built-in column filtering (it uses Telerik’s DatePicker control) to behave. The DatePicker assumes that the time is 00:00:00 but the data would have times like 09:22:21. So, when you select a date and apply the EqualTo filter, you get no results. You would get results if all the time portions were 00:00:00. In essence, I wanted my Entity Framework query to give the DatePicker what it wanted… a Date without the Time portion. Fortunately, EF4 provides the TruncateTime function. After you include Imports System.Data.Objects.EntityFunctions You’ll find that your EF queries will accept the TruncateTime function. Here’s my routine: Protected Sub RadGrid1_NeedDataSource _ (ByVal source As Object, _ ByVal e As Telerik.Web.UI.GridNeedDataSourceEventArgs) _ Handles RadGrid1.NeedDataSource Dim ent As New OfficeBookDBEntities1 Dim TopBOMs = From t In ent.TopBom, i In ent.Items _ Where t.BusActivityID = busActivityID _ And i.BusActivityID And t.ItemID = i.RecordID _ Order By t.DateUpdated Descending _ Select New With {.TopBomID = t.TopBomID, .ItemID = t.ItemID, _ .PartNumber = i.PartNumber, _ .Description = i.Description, .Notes = t.Notes, _ .DateCreated = TruncateTime(t.DateCreated), _ .DateUpdated = TruncateTime(t.DateUpdated)} RadGrid1.DataSource = TopBOMs End Sub Now when I select March 14, 2011 on the DatePicker, the filter doesn’t stumble on time values that don’t make sense. Full Disclosure: Telerik gives me (and other developer MVPs) free copies of their suite.

Read the article

Oracle Enterprise Manager 11g is Here!

- by chung.wu

We hope that you enjoyed the launch event. If you missed it, you may still watch it via our on demand webcast, which is being produced and will be posted very shortly. 11gR1 is a major release of Oracle Enterprise Manager, and as one would expect from a big release, there are many new capabilities that appeal to a broad set of audience. Before going into the laundry list of new features, let's talk about the key themes for this release to put things in perspective. First, this release is about Business Driven Application Management. The traditional paradigm of component centric systems management simply cannot satisfy the management needs of modern distributed applications, as they do not provide adequate visibility of whether these applications are truly meeting the service level expectations of the business users. Business Driven Application Management helps IT manage applications according to the needs of the business users so that valuable IT resources can be better focused to help deliver better business results. To support Business Driven Application Management, 11gR1 builds on the work that we started in 10g to provide better support for user experience management. This capability helps IT better understand how users use applications and the experience that the applications provide so that IT can take actions to help end users get their work done more effectively. In addition, this release also delivers improved business transaction management capabilities to make it faster and easier to understand and troubleshoot transaction problems that impact end user experience. Second, this release includes strengthened Integrated Application-to-Disk Management. Every component of an application environment, from the application logic to the application server, to database, host machines and storage devices, etc... can affect end user experience. After user experience improvement needs are identified, IT needs tools that can be used do deep dive diagnostics for each of the application environment component, analyze configurations and deploy changes. Enterprise Manager 11gR1 extends coverage of key application environment components to include full support for Oracle Database 11gR2, Exadata V2, and Fusion Middleware 11g. For composite and Java application management, two key pieces of technologies, JVM Diagnostic and Composite Application Monitoring and Modeler, are now fully integrated into Enterprise Manager so there is no need to install and maintain separate tools. In addition, we have delivered the first set of integration between Enterprise Manager Grid Control and Enterprise Manager Ops Center so that hardware level events can be centrally monitored via Grid Control. Finally, this release delivers Integrated Systems Management and Support for customers of Oracle technologies. Traditionally, systems management tools and tech support were separate silos. When problems occur, administrators used internally deployed tools to try to solve the problems themselves. If they couldn't fix the problems, then they would use some sort of support website to get help from the vendor's support staff. Oracle Enterprise Manager 11g integrates problem diagnostic and remediation workflow. Administrators can use Oracle Enterprise Manager's various diagnostic tools to begin the troubleshooting process. They can also use the integrated access to My Oracle Support to look up solutions and download software patches. If further help is needed, administrators can open service requests from right within Oracle Enterprise Manager and track status update. Oracle's support staff, using Enterprise Manager's configuration management capabilities, can collect important configuration information about customer environments in order to expedite problem resolution. This tight integration between Oracle Enterprise Manager and My Oracle Support helps Oracle customers achieve a Superior Ownership Experience for their Oracle products. So there you have it. This is a brief 50,000 feet overview of Oracle Enterprise Manager 11g. We know you are hungry for the details. We are going to write about it in the coming days and weeks. For those of you that absolutely can't wait to find out more, you may download our software to try it out today. In fact, for the first time ever, the initial release of Oracle Enterprise Manager is available for both 32 and 64 bit Linux. Additional O/S ports will arrive in the coming weeks. Please stay tuned on the Oracle Enterprise Manager blog for additional updates.

Read the article

New security options in UCM Patch Set 3

- by kyle.hatlestad

While the Patch Set 3 (PS3) release was mostly focused on bug fixes and such, some new features sneaked in there. One of those new features is to the security options. In 10gR3 and prior versions, UCM had a component called Collaboration Manager which allowed for project folders to be created and groups of users assigned as members to collaborate on documents. With this component came access control lists (ACL) for content and folders. Users could assign specific security rights on each and every document and folder within a project. And it was even possible to enable these ACL's without having the Collaboration Manager component enabled (see technote# 603148.1). When 11g came out, Collaboration Manager was no longer available. But the configuration settings to turn on ACLs were still there. Well, in PS3 they're implemented slightly differently. And there is a new component available which adds an additional dimension to define security on the object, Roles. So now instead of selecting individual users or groups of users (defined as an Alias in User Admin), you can select a particular role. And if a user has that role, they are granted that level of access. This can allow for a much more flexible and manageable security model instead of trying to manage with just user and group access as people come and go in the organization. The way that it is enabled is still through configuration entries. First log in as an administrator and go to Administration -> Admin Server. On the Component Manager page, click the 'advanced component manager' link in the description paragraph at the top. In the list of Disabled Components, enable the RoleEntityACL component. Then click the General Configuration link on the left. In the Additional Configuration Variables text area, enter the new configuration values: UseEntitySecurity=true SpecialAuthGroups=<comma separated list of Security Groups to honor ACLs> The SpecialAuthGroups should be a list of Security Groups that honor the ACL fields. If an ACL is applied to a content item with a Security Group outside this list, it will be ignored. Save the settings and restart the instance. Upon restart, three new metadata fields will be created: xClbraUserList, xClbraAliasList, xClbraRoleList. If you are using OracleTextSearch as the search indexer, be sure to run a Fast Rebuild on the collection. On the Check In, Search, and Update pages, values are added by simply typing in the value and getting a type-ahead list of possible values. Select the value, click Add and then set the level of access (Read, Write, Delete, or Admin). If all of the fields are blank, then it simply falls back to just Security Group and Account access. For Users and Groups, these values are automatically picked up from the corresponding database tables. In the case of Roles, this is an explicitly defined list of choices that are made available. These values must match the role that is being defined from WebLogic Server or you LDAP/AD repository. To add these values, go to Administration -> Admin Applets -> Configuration Manager. On the Views tab, edit the values for the ExternalRolesView. By default, 'guest' and 'authenticated' are added. Once added to through the view, they will be available to select from for the Roles Access List. As for how they are stored in the metadata fields, each entry starts with it's identifier: ampersand (&) symbol for users, "at" (@) symbol for groups, and colon (:) for roles. Following that is the entity name. And at the end is the level of access in paranthesis. e.g. (RWDA). And each entry is separated by a comma. So if you were populating values through batch loader or an external source, the values would be defined this way. Detailed information on Access Control Lists can be found in the Oracle Fusion Middleware System Administrator's Guide for Oracle Content Server.

Read the article

Setting up SharePoint without Active Directory

- by eJugnoo

In order to setup SharePoint without AD, you need to run following PowerShell command on Management Shell after installing SharePoint on your server, but before running Config Wizard: (we don’t want to run this SP farm in stand-alone mode!) 1. New-SPConfigurationDatabase SYNOPSIS Creates a new configuration database. SYNTAX New-SPConfigurationDatabase [-DatabaseName] <String> [-DatabaseServer] <String> [[-DirectoryDomain] <String>] [[-DirectoryOrganizationUnit] <String>] [[-AdministrationContentDatabaseName] <String>] [[-DatabaseCredentials] <PSCredential>] [-FarmCredentials] <PSCredential> [-Passphrase] <SecureString> [-AssignmentCollection <SPAssignmentCollection>] [<CommonParameters>] DESCRIPTION The New-SPConfigurationDatabase cmdlet creates a new configuration database on the specified database server. This is the central database for a new SharePoint farm. For permissions and the most current information about Windows PowerShell for SharePoint Products, see the online documentation (http://go.microsoft.com/fwlink/?LinkId=163185). RELATED LINKS Backup-SPConfigurationDatabase Disconnect-SPConfigurationDatabase Connect-SPConfigurationDatabase Remove-SPConfigurationDatabase REMARKS To see the examples, type: "get-help New-SPConfigurationDatabase -examples". For more information, type: "get-help New-SPConfigurationDatabase -detailed". For technical information, type: "get-help New-SPConfigurationDatabase -full". NOTE: Use –AdministrationContentDatabaseName switch to pass the name of Admin database you want instead of GUID-based name it automatically creates. Hence, one can pretty much easily control Admin, Config, and Content database names at the time of farm creation. If creating new farm, you can also delete and re-provision any service databases automatically created, from UI, to decide what database names you want. 2. Run SharePoint Configuration Wizard, and you’ll following as already added to farm. Select do not discconect from farm, and proceed… Select the port, and authentication (NTLM in my case). Click next, and wizard will complete the remaining steps of provisioning, including creation of Central Admin Web App on the desired port. Once successful, it will open the Central Admin site and ask you to run Farm Config Wizard. I chose to skip and do things manually, to remain in control of what is happening on the farm. Like creating web-app for site collections, creating the very first site collection, and any other service applications. I needed this to create a public-facing installation of SharePoint Foundation RTM on a server which didn’t have AD. Now I am going to setup FBA, and possibly Live ID Auth as well. I will be also setting up RBS, and multi-tenancy on this farm ,and would post any notes, and findings here… --Sharad

Read the article

Running a simple integration scenario using the Oracle Big Data Connectors on Hadoop/HDFS cluster

- by hamsun

Between the elephant ( the tradional image of the Hadoop framework) and the Oracle Iron Man (Big Data..) an english setter could be seen as the link to the right data Data, Data, Data, we are living in a world where data technology based on popular applications , search engines, Webservers, rich sms messages, email clients, weather forecasts and so on, have a predominant role in our life. More and more technologies are used to analyze/track our behavior, try to detect patterns, to propose us "the best/right user experience" from the Google Ad services, to Telco companies or large consumer sites (like Amazon:) ). The more we use all these technologies, the more we generate data, and thus there is a need of huge data marts and specific hardware/software servers (as the Exadata servers) in order to treat/analyze/understand the trends and offer new services to the users. Some of these "data feeds" are raw, unstructured data, and cannot be processed effectively by normal SQL queries. Large scale distributed processing was an emerging infrastructure need and the solution seemed to be the "collocation of compute nodes with the data", which in turn leaded to MapReduce parallel patterns and the development of the Hadoop framework, which is based on MapReduce and a distributed file system (HDFS) that runs on larger clusters of rather inexpensive servers. Several Oracle products are using the distributed / aggregation pattern for data calculation ( Coherence, NoSql, times ten ) so once that you are familiar with one of these technologies, lets says with coherence aggregators, you will find the whole Hadoop, MapReduce concept very similar. Oracle Big Data Appliance is based on the Cloudera Distribution (CDH), and the Oracle Big Data Connectors can be plugged on a Hadoop cluster running the CDH distribution or equivalent Hadoop clusters. In this paper, a "lab like" implementation of this concept is done on a single Linux X64 server, running an Oracle Database 11g Enterprise Edition Release 11.2.0.4.0, and a single node Apache hadoop-1.2.1 HDFS cluster, using the SQL connector for HDFS. The whole setup is fairly simple: Install on a Linux x64 server ( or virtual box appliance) an Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 server Get the Apache Hadoop distribution from: http://mir2.ovh.net/ftp.apache.org/dist/hadoop/common/hadoop-1.2.1. Get the Oracle Big Data Connectors from: http://www.oracle.com/technetwork/bdc/big-data-connectors/downloads/index.html?ssSourceSiteId=ocomen. Check the java version of your Linux server with the command: java -version java version "1.7.0_40" Java(TM) SE Runtime Environment (build 1.7.0_40-b43) Java HotSpot(TM) 64-Bit Server VM (build 24.0-b56, mixed mode) Decompress the hadoop hadoop-1.2.1.tar.gz file to /u01/hadoop-1.2.1 Modify your .bash_profile export HADOOP_HOME=/u01/hadoop-1.2.1 export PATH=$PATH:$HADOOP_HOME/bin export HIVE_HOME=/u01/hive-0.11.0 export PATH=$PATH:$HADOOP_HOME/bin:$HIVE_HOME/bin (also see my sample .bash_profile) Set up ssh trust for Hadoop process, this is a mandatory step, in our case we have to establish a "local trust" as will are using a single node configuration copy the new public keys to the list of authorized keys connect and test the ssh setup to your localhost: We will run a "pseudo-Hadoop cluster", in what is called "local standalone mode", all the Hadoop java components are running in one Java process, this is enough for our demo purposes. We need to "fine tune" some Hadoop configuration files, we have to go at our $HADOOP_HOME/conf, and modify the files: core-site.xml hdfs-site.xml mapred-site.xml check that the hadoop binaries are referenced correctly from the command line by executing: hadoop -version As Hadoop is managing our "clustered HDFS" file system we have to create "the mount point" and format it , the mount point will be declared to core-site.xml as: The layout under the /u01/hadoop-1.2.1/data will be created and used by other hadoop components (MapReduce = /mapred/...) HDFS is using the /dfs/... layout structure format the HDFS hadoop file system: Start the java components for the HDFS system As an additional check, you can use the GUI Hadoop browsers to check the content of your HDFS configurations: Once our HDFS Hadoop setup is done you can use the HDFS file system to store data ( big data : )), and plug them back and forth to Oracle Databases by the means of the Big Data Connectors ( which is the next configuration step). You can create / use a Hive db, but in our case we will make a simple integration of "raw data" , through the creation of an External Table to a local Oracle instance ( on the same Linux box, we run the Hadoop HDFS one node cluster and one Oracle DB). Download some public "big data", I use the site: http://france.meteofrance.com/france/observations, from where I can get *.csv files for my big data simulations :). Here is the data layout of my example file: Download the Big Data Connector from the OTN (oraosch-2.2.0.zip), unzip it to your local file system (see picture below) Modify your environment in order to access the connector libraries , and make the following test: [oracle@dg1 bin]$./hdfs_stream Usage: hdfs_stream locationFile [oracle@dg1 bin]$ Load the data to the Hadoop hdfs file system: hadoop fs -mkdir bgtest_data hadoop fs -put obsFrance.txt bgtest_data/obsFrance.txt hadoop fs -ls /user/oracle/bgtest_data/obsFrance.txt [oracle@dg1 bg-data-raw]$ hadoop fs -ls /user/oracle/bgtest_data/obsFrance.txt Found 1 items -rw-r--r-- 1 oracle supergroup 54103 2013-10-22 06:10 /user/oracle/bgtest_data/obsFrance.txt [oracle@dg1 bg-data-raw]$hadoop fs -ls hdfs:///user/oracle/bgtest_data/obsFrance.txt Found 1 items -rw-r--r-- 1 oracle supergroup 54103 2013-10-22 06:10 /user/oracle/bgtest_data/obsFrance.txt Check the content of the HDFS with the browser UI: Start the Oracle database, and run the following script in order to create the Oracle database user, the Oracle directories for the Oracle Big Data Connector (dg1 it’s my own db id replace accordingly yours): #!/bin/bash export ORAENV_ASK=NO export ORACLE_SID=dg1 . oraenv sqlplus /nolog <<EOF CONNECT / AS sysdba; CREATE OR REPLACE DIRECTORY osch_bin_path AS '/u01/orahdfs-2.2.0/bin'; CREATE USER BGUSER IDENTIFIED BY oracle; GRANT CREATE SESSION, CREATE TABLE TO BGUSER; GRANT EXECUTE ON sys.utl_file TO BGUSER; GRANT READ, EXECUTE ON DIRECTORY osch_bin_path TO BGUSER; CREATE OR REPLACE DIRECTORY BGT_LOG_DIR as '/u01/BG_TEST/logs'; GRANT READ, WRITE ON DIRECTORY BGT_LOG_DIR to BGUSER; CREATE OR REPLACE DIRECTORY BGT_DATA_DIR as '/u01/BG_TEST/data'; GRANT READ, WRITE ON DIRECTORY BGT_DATA_DIR to BGUSER; EOF Put the following in a file named t3.sh and make it executable, hadoop jar $OSCH_HOME/jlib/orahdfs.jar \ oracle.hadoop.exttab.ExternalTable \ -D oracle.hadoop.exttab.tableName=BGTEST_DP_XTAB \ -D oracle.hadoop.exttab.defaultDirectory=BGT_DATA_DIR \ -D oracle.hadoop.exttab.dataPaths="hdfs:///user/oracle/bgtest_data/obsFrance.txt" \ -D oracle.hadoop.exttab.columnCount=7 \ -D oracle.hadoop.connection.url=jdbc:oracle:thin:@//localhost:1521/dg1 \ -D oracle.hadoop.connection.user=BGUSER \ -D oracle.hadoop.exttab.printStackTrace=true \ -createTable --noexecute then test the creation fo the external table with it: [oracle@dg1 samples]$ ./t3.sh ./t3.sh: line 2: /u01/orahdfs-2.2.0: Is a directory Oracle SQL Connector for HDFS Release 2.2.0 - Production Copyright (c) 2011, 2013, Oracle and/or its affiliates. All rights reserved. Enter Database Password:] The create table command was not executed. The following table would be created. CREATE TABLE "BGUSER"."BGTEST_DP_XTAB" ( "C1" VARCHAR2(4000), "C2" VARCHAR2(4000), "C3" VARCHAR2(4000), "C4" VARCHAR2(4000), "C5" VARCHAR2(4000), "C6" VARCHAR2(4000), "C7" VARCHAR2(4000) ) ORGANIZATION EXTERNAL ( TYPE ORACLE_LOADER DEFAULT DIRECTORY "BGT_DATA_DIR" ACCESS PARAMETERS ( RECORDS DELIMITED BY 0X'0A' CHARACTERSET AL32UTF8 STRING SIZES ARE IN CHARACTERS PREPROCESSOR "OSCH_BIN_PATH":'hdfs_stream' FIELDS TERMINATED BY 0X'2C' MISSING FIELD VALUES ARE NULL ( "C1" CHAR(4000), "C2" CHAR(4000), "C3" CHAR(4000), "C4" CHAR(4000), "C5" CHAR(4000), "C6" CHAR(4000), "C7" CHAR(4000) ) ) LOCATION ( 'osch-20131022081035-74-1' ) ) PARALLEL REJECT LIMIT UNLIMITED; The following location files would be created. osch-20131022081035-74-1 contains 1 URI, 54103 bytes 54103 hdfs://localhost:19000/user/oracle/bgtest_data/obsFrance.txt Then remove the --noexecute flag and create the external Oracle table for the Hadoop data. Check the results: The create table command succeeded. CREATE TABLE "BGUSER"."BGTEST_DP_XTAB" ( "C1" VARCHAR2(4000), "C2" VARCHAR2(4000), "C3" VARCHAR2(4000), "C4" VARCHAR2(4000), "C5" VARCHAR2(4000), "C6" VARCHAR2(4000), "C7" VARCHAR2(4000) ) ORGANIZATION EXTERNAL ( TYPE ORACLE_LOADER DEFAULT DIRECTORY "BGT_DATA_DIR" ACCESS PARAMETERS ( RECORDS DELIMITED BY 0X'0A' CHARACTERSET AL32UTF8 STRING SIZES ARE IN CHARACTERS PREPROCESSOR "OSCH_BIN_PATH":'hdfs_stream' FIELDS TERMINATED BY 0X'2C' MISSING FIELD VALUES ARE NULL ( "C1" CHAR(4000), "C2" CHAR(4000), "C3" CHAR(4000), "C4" CHAR(4000), "C5" CHAR(4000), "C6" CHAR(4000), "C7" CHAR(4000) ) ) LOCATION ( 'osch-20131022081719-3239-1' ) ) PARALLEL REJECT LIMIT UNLIMITED; The following location files were created. osch-20131022081719-3239-1 contains 1 URI, 54103 bytes 54103 hdfs://localhost:19000/user/oracle/bgtest_data/obsFrance.txt This is the view from the SQL Developer: and finally the number of lines in the oracle table, imported from our Hadoop HDFS cluster SQL select count(*) from "BGUSER"."BGTEST_DP_XTAB"; COUNT(*) ---------- 1151 In a next post we will integrate data from a Hive database, and try some ODI integrations with the ODI Big Data connector. Our simplistic approach is just a step to show you how these unstructured data world can be integrated to Oracle infrastructure. Hadoop, BigData, NoSql are great technologies, they are widely used and Oracle is offering a large integration infrastructure based on these services. Oracle University presents a complete curriculum on all the Oracle related technologies: NoSQL: Introduction to Oracle NoSQL Database Using Oracle NoSQL Database Big Data: Introduction to Big Data Oracle Big Data Essentials Oracle Big Data Overview Oracle Data Integrator: Oracle Data Integrator 12c: New Features Oracle Data Integrator 11g: Integration and Administration Oracle Data Integrator: Administration and Development Oracle Data Integrator 11g: Advanced Integration and Development Oracle Coherence 12c: Oracle Coherence 12c: New Features Oracle Coherence 12c: Share and Manage Data in Clusters Oracle Coherence 12c: Oracle GoldenGate 11g: Fundamentals for Oracle Oracle GoldenGate 11g: Fundamentals for SQL Server Oracle GoldenGate 11g Fundamentals for Oracle Oracle GoldenGate 11g Fundamentals for DB2 Oracle GoldenGate 11g Fundamentals for Teradata Oracle GoldenGate 11g Fundamentals for HP NonStop Oracle GoldenGate 11g Management Pack: Overview Oracle GoldenGate 11g Troubleshooting and Tuning Oracle GoldenGate 11g: Advanced Configuration for Oracle Other Resources: Apache Hadoop : http://hadoop.apache.org/ is the homepage for these technologies. "Hadoop Definitive Guide 3rdEdition" by Tom White is a classical lecture for people who want to know more about Hadoop , and some active "googling " will also give you some more references. About the author: Eugene Simos is based in France and joined Oracle through the BEA-Weblogic Acquisition, where he worked for the Professional Service, Support, end Education for major accounts across the EMEA Region. He worked in the banking sector, ATT, Telco companies giving him extensive experience on production environments. Eugen currently specializes in Oracle Fusion Middleware teaching an array of courses on Weblogic/Webcenter, Content,BPM /SOA/Identity-Security/GoldenGate/Virtualisation/Unified Comm Suite) throughout the EMEA region.

Read the article

Time to stop using “Execute Package Task”– a way to execute package in SSIS catalog taking advantage of the new project deployment model ,and the logging and reporting feature

- by Kevin Shyr

I set out to find a way to dynamically call package in SSIS 2012. The following are 2 excellent blogs I found; I used them heavily. The code below has some addition to parameter types and message types, but was made essentially derived entirely from the blogs. http://sqlblog.com/blogs/jamie_thomson/archive/2011/07/16/ssis-logging-in-denali.aspx http://www.ssistalk.com/2012/07/24/quick-tip-run-ssis-2012-packages-synchronously-and-other-execution-options/ The code: Every package will be called by a PackageController package. The packageController is initialized with some information on which package to run and what information to pass in. The following is the stored procedure called from the “Execute SQL Task”. Here is the highlight of the stored procedure It takes in packageName, project name, and folder name (folder in SSIS project deployment to SSIS catalog) The stored procedure sets the package variables of the upcoming package execution Execute package in SSIS Catalog Get the status of the execution. Also, if exists, get the error message’s message_id and store them in the management database. Return value to “Execute SQL Task” to manage failure properly CREATE PROCEDURE [AUDIT].[LaunchPackageExecutionInSSISCatalog] @PackageName NVARCHAR(255) , @ProjectFolder NVARCHAR(255) , @ProjectName NVARCHAR(255) , @AuditKey INT , @DisableNotification BIT , @PackageExecutionLogID INT AS BEGIN TRY DECLARE @execution_id BIGINT = 0; -- Create a package execution EXEC [SSISDB].[catalog].[create_execution] @package_name=@PackageName, @execution_id=@execution_id OUTPUT, @folder_name=@ProjectFolder, @project_name=@ProjectName, @use32bitruntime=False; UPDATE [AUDIT].[PackageInstanceExecutionLog] WITH(ROWLOCK) SET [SSISCatalogExecutionID] = @execution_id WHERE [PackageInstanceExecutionLogID] = @PackageExecutionLogID -- this is to set the execution synchronized so that I can check the result in the end EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'SYNCHRONIZED', @parameter_value=1; -- true /******************************************************** ******************************************************** Section: setting parameters Source table: SSISDB.internal.object_parameters object_type list: 20: project level variables 30: package level variables 50: execution parameter ******************************************************** ********************************************************/ EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=30, @parameter_name=N'FromParent_AuditKey', @parameter_value=@AuditKey; -- true EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=30, @parameter_name=N'FromParent_DisableNotification', @parameter_value=@DisableNotification; -- true EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=30, @parameter_name=N'FromParent_PackageInstanceExecutionID', @parameter_value=@PackageExecutionLogID; -- true /******************************************************** ******************************************************** Section: setting variables END ******************************************************** ********************************************************/ /* This section is carried over from example code I don't see a reason to change them yet */ -- Set our package parameters EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'DUMP_ON_EVENT', @parameter_value=1; -- true EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'DUMP_EVENT_CODE', @parameter_value=N'0x80040E4D;0x80004005'; EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'LOGGING_LEVEL', @parameter_value= 1; -- Basic EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'DUMP_ON_ERROR', @parameter_value=1; -- true /******************************************************** ******************************************************** Section: EXECUTING ******************************************************** ********************************************************/ EXEC [SSISDB].[catalog].[start_execution] @execution_id; /******************************************************** ******************************************************** Section: EXECUTING END ******************************************************** ********************************************************/ /******************************************************** ******************************************************** Section: checking execution result Source table: [SSISDB].[catalog].[executions] status: 1: created 2: running 3: cancelled 4: failed 5: pending 6: ended unexpectedly 7: succeeded 8: stopping 9: completed ******************************************************** ********************************************************/ if EXISTS(SELECT TOP 1 1 FROM [SSISDB].[catalog].[executions] WITH(NOLOCK) WHERE [execution_id] = @execution_id AND [status] NOT IN (2, 7, 9)) BEGIN /******************************************************** ******************************************************** Section: logging error messages Source table: [SSISDB].[internal].[operation_messages] message type: 10: OnPreValidate 20: OnPostValidate 30: OnPreExecute 40: OnPostExecute 60: OnProgress 70: OnInformation 90: Diagnostic 110: OnWarning 120: OnError 130: Failure 140: DiagnosticEx 200: Custom events 400: OnPipeline message source type: 10: Messages logged by the entry APIs (e.g. T-SQL, CLR Stored procedures) 20: Messages logged by the external process used to run package (ISServerExec) 30: Messages logged by the package-level objects 40: Messages logged by tasks in the control flow 50: Messages logged by containers (For, ForEach, Sequence) in the control flow 60: Messages logged by the Data Flow Task ******************************************************** ********************************************************/ INSERT INTO AUDIT.PackageInstanceExecutionOperationErrorLink SELECT @PackageExecutionLogID ,[operation_message_id] FROM [SSISDB].[internal].[operation_messages] WITH(NOLOCK) WHERE operation_id = @execution_id AND message_type IN (120, 130) EXEC [AUDIT].[FailPackageInstanceExecution] @PackageExecutionLogID, 'SSISDB Internal operation_messages found' GOTO ReturnTrueAsErrorFlag /******************************************************** ******************************************************** Section: checking messages END ******************************************************** ********************************************************/ /* This part is not really working, so now using rowcount to pass status --DECLARE @PackageErrorMessage NVARCHAR(4000) --SET @PackageErrorMessage = @PackageName + 'failed with executionID: ' + CONVERT(VARCHAR(20), @execution_id) --RAISERROR (@PackageErrorMessage -- Message text. -- , 18 -- Severity, -- , 1 -- State, -- , N'check table AUDIT.PackageInstanceExecutionErrorMessages' -- First argument. -- ); */ END ELSE BEGIN GOTO ReturnFalseAsErrorFlagToSignalSuccess END /******************************************************** ******************************************************** Section: checking execution result END ******************************************************** ********************************************************/ END TRY BEGIN CATCH DECLARE @SSISCatalogCallError NVARCHAR(MAX) SELECT @SSISCatalogCallError = ERROR_MESSAGE() EXEC [AUDIT].[FailPackageInstanceExecution] @PackageExecutionLogID, @SSISCatalogCallError GOTO ReturnTrueAsErrorFlag END CATCH; /******************************************************** ******************************************************** Section: end result ******************************************************** ********************************************************/ ReturnTrueAsErrorFlag: SELECT CONVERT(BIT, 1) AS PackageExecutionErrorExists ReturnFalseAsErrorFlagToSignalSuccess: SELECT CONVERT(BIT, 0) AS PackageExecutionErrorExists GO

Read the article

Silverlight Cream for January 26, 2011 -- #1036

- by Dave Campbell

In this all-submittal Issue: XamlNinja, Kevin Dockx, Steve Wortham, Andrea Boschin, Mick Norman, Colin Eberhardt, and Rudi Grobler(-2-, -3-, -4-, -5-). Above the Fold: Silverlight: "Getting an invalid cross-thread exception in Silverlight?" Kevin Dockx WP7: "WP7 Contrib – the last messenger" XamlNinja ISO: "How many files are too many files for isolated storage?" Mick Norman Shoutouts: Telerik announced a free WP7 Webinars series that you probably don't want to miss: Join Us for the Special Free Windows Phone 7 Webinars Series. Guest lecturers - Shawn Wildermuth and Mark Arteaga From SilverlightCream.com: WP7 Contrib – the last messenger XamlNinja has a great post up extending Laurent's IMessenger to deal with a tricky issue of trying to fire a message from one VM to another even if the 2nd VM isn't alive yet... oh, and this is in WP7Contrib, so go grab it! Getting an invalid cross-thread exception in Silverlight? Kevin Dockx has a solution to a problem we've all had... the 'invalid cross-thread exception' ... and the solution is even for those of us trying to do this in a VM... cool and easy solution, Kevin! Mastering Storyboards One Mistake at a Time Steve Wortham is back with a tutorial with a great title :) ... check out the progression from one success to another in this picture/title viewer ... don't miss the very end where he has the control rolled up into a CaptionedImageHyperlink, and a link to download it! Windows Phone 7 - Part #2: Your First Application Andrea Boschin has part 2 of his SilverlightShow WP7 series up. Lots of good intro material here on the manifest file and app.xaml ... he even gets into the ApplicationBar, phone orientation, and the Metro theme. How many files are too many files for isolated storage? Mick Norman alerted me to his blog early this morning, and this is his latest post... interesting tests of how many files are too many for ISO on your WP7... and I have to admit... he's stuffing a boatload of them out there in these tests! ... great info Mick! and thanks for the links. A Navigator Control For Visiblox Time Series Charts Colin Eberhardt's latest post is about creating an interactive navigator for large time series datasets in Visiblox charts.... check the images at the top of the post, and it'll be obvious :) ... very cool stuff. MVVM Frameworks with WP7 support Rudi Grobler has been very busy and if you check the dates, these posts are all in a day or two! This first highlights two contenders for MVVM on WP7: Caliburn and MVVMLight... both well-supported... quick intro to each followed by good links out to the author's sites Reading barcodes from your WP7 device Rudi Grobler also has a cool post up on reading barcodes with your WP7... he's using the ZXing Barcode Scanning Library, and makes quick work of the job. Taking Sterling for a Test-Drive Rudi Grobler has a quick intro to Sterlink, Jeremy Likness' ISO database for Silverlight up... quickly taking care of writing and reading back data. SQLite on WP7 After his discussion of Sterling, Rudi Grobler is now demonstrating the use of SQLite that has been ported to WP7. Check out his demo code... looks pretty easy to use. Hacking the WP7 Camera (The basics) Rudi Grobler's latest post is on getting direct access to the camera on WP7... be sure to do all the downloads and check out the external links he has. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Talking JavaOne with Rock Star Simon Ritter

- by Janice J. Heiss

Oracle’s Java Technology Evangelist Simon Ritter is well known at JavaOne for his quirky and fun-loving sessions, which, this year include: CON4644 -- “JavaFX Extreme GUI Makeover” (with Angela Caicedo on how to improve UIs in JavaFX) CON5352 -- “Building JavaFX Interfaces for the Real World” (Kinect gesture tracking and mind reading) CON5348 -- “Do You Like Coffee with Your Dessert?” (Some cool demos of Java of the Raspberry Pi) CON6375 -- “Custom JavaFX Charts: (How to extend JavaFX Chart controls with some interesting things) I recently asked Ritter about the significance of the Raspberry Pi, the topic of one of his sessions that consists of a credit card-sized single-board computer developed in the UK with the intention of stimulating the teaching of basic computer science in schools. “I don't think there's one definitive thing that makes the RP significant,” observed Ritter, “but a combination of things that really makes it stand out. First, it's the cost: $35 for what is effectively a completely usable computer. OK, so you have to add a power supply, SD card for storage and maybe a screen, keyboard and mouse, but this is still way cheaper than a typical PC. The choice of an ARM processor is also significant, as it avoids problems like cooling (no heat sink or fan) and can use a USB power brick. Combine these two things with the immense groundswell of community support and it provides a fantastic platform for teaching young and old alike about computing, which is the real goal of the project.”He informed me that he’ll be at the Raspberry Pi meetup on Saturday (not part of JavaOne). Check out the details here.JavaFX InterfacesWhen I asked about how JavaFX can interface with the real world, he said that there are many ways. “JavaFX provides you with a simple set of programming interfaces that can create complex, cool and compelling user interfaces,” explained Ritter. “Because it's just Java code you can combine JavaFX with any other Java library to provide data to display and control the interface. What I've done for my session is look at some of the possible ways of doing this using some of the amazing hardware that's available today at very low cost. The Kinect sensor has added a new dimension to gaming in terms of interaction; there's a Java API to access this so you can easily collect skeleton tracking data from it. Some clever people have also written libraries that can track gestures like swipes, circles, pushes, and so on. We use these to control parts of the UI. I've also experimented with a Neurosky EEG sensor that can in some ways ‘read your mind’ (well, at least measure some of the brain functions like attention and meditation). I've written a Java library for this that I include as a way of controlling the UI. We're not quite at the stage of just thinking a command though!” Here Comes Java EmbeddedAnd what, from Ritter’s perspective, is the most exciting thing happening in the world of Java today? “I think it's seeing just how Java continues to become more and more pervasive,” he said. “One of the areas that is growing rapidly is embedded systems. We've talked about the ‘Internet of things’ for many years; now it's finally becoming a reality. With the ability of more and more devices to include processing, storage and networking we need an easy way to write code for them that's reliable, has high performance, and is secure. Java fits all these requirements. With Java Embedded being a conference within a conference, I'm very excited about the possibilities of Java in this space.”Check out Ritter’s sessions or say hi if you run into him. Originally published on blogs.oracle.com/javaone.

Read the article

Talking JavaOne with Rock Star Simon Ritter

- by Janice J. Heiss

Oracle’s Java Technology Evangelist Simon Ritter is well known at JavaOne for his quirky and fun-loving sessions, which, this year include: CON4644 -- “JavaFX Extreme GUI Makeover” (with Angela Caicedo on how to improve UIs in JavaFX) CON5352 -- “Building JavaFX Interfaces for the Real World” (Kinect gesture tracking and mind reading) CON5348 -- “Do You Like Coffee with Your Dessert?” (Some cool demos of Java of the Raspberry Pi) CON6375 -- “Custom JavaFX Charts: (How to extend JavaFX Chart controls with some interesting things) I recently asked Ritter about the significance of the Raspberry Pi, the topic of one of his sessions that consists of a credit card-sized single-board computer developed in the UK with the intention of stimulating the teaching of basic computer science in schools. “I don't think there's one definitive thing that makes the RP significant,” observed Ritter, “but a combination of things that really makes it stand out. First, it's the cost: $35 for what is effectively a completely usable computer. OK, so you have to add a power supply, SD card for storage and maybe a screen, keyboard and mouse, but this is still way cheaper than a typical PC. The choice of an ARM processor is also significant, as it avoids problems like cooling (no heat sink or fan) and can use a USB power brick. Combine these two things with the immense groundswell of community support and it provides a fantastic platform for teaching young and old alike about computing, which is the real goal of the project.”He informed me that he’ll be at the Raspberry Pi meetup on Saturday (not part of JavaOne). Check out the details here.JavaFX InterfacesWhen I asked about how JavaFX can interface with the real world, he said that there are many ways. “JavaFX provides you with a simple set of programming interfaces that can create complex, cool and compelling user interfaces,” explained Ritter. “Because it's just Java code you can combine JavaFX with any other Java library to provide data to display and control the interface. What I've done for my session is look at some of the possible ways of doing this using some of the amazing hardware that's available today at very low cost. The Kinect sensor has added a new dimension to gaming in terms of interaction; there's a Java API to access this so you can easily collect skeleton tracking data from it. Some clever people have also written libraries that can track gestures like swipes, circles, pushes, and so on. We use these to control parts of the UI. I've also experimented with a Neurosky EEG sensor that can in some ways ‘read your mind’ (well, at least measure some of the brain functions like attention and meditation). I've written a Java library for this that I include as a way of controlling the UI. We're not quite at the stage of just thinking a command though!” Here Comes Java EmbeddedAnd what, from Ritter’s perspective, is the most exciting thing happening in the world of Java today? “I think it's seeing just how Java continues to become more and more pervasive,” he said. “One of the areas that is growing rapidly is embedded systems. We've talked about the ‘Internet of things’ for many years; now it's finally becoming a reality. With the ability of more and more devices to include processing, storage and networking we need an easy way to write code for them that's reliable, has high performance, and is secure. Java fits all these requirements. With Java Embedded being a conference within a conference, I'm very excited about the possibilities of Java in this space.”Check out Ritter’s sessions or say hi if you run into him.

Read the article

No more internet connection after update in 14.04 with Intel Dual Band Wireless AC 7260

- by luis

My Dell XPS 15 (haswell) was working fine until I stupidly accepted recently to apply Ubuntu updates. Since then, my wifi does not work (it shows "device not managed" when clicking wifi icon in toolbar). Even USB to Ethernet adapter does not seem to work. Bluetooth at least "sees" other bluetooth devices around... See below output from dmesg (dmesg |grep iwl) : [ 886.462459] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 886.462561] iwlwifi 0000:06:00.0: Direct firmware load failed with error -2 [ 886.462562] iwlwifi 0000:06:00.0: Falling back to user helper [ 886.463284] iwlwifi 0000:06:00.0: loaded firmware version 22.1.7.0 op_mode iwlmvm [ 886.475345] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 886.475433] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.475684] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.689214] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Below the output from modinfo iwlwifi: filename: /lib/modules/3.13.0-29- generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko license: GPL author: Copyright(c) 2003-2013 Intel Corporation <[email protected]> version: in-tree: description: Intel(R) Wireless WiFi driver for Linux firmware: iwlwifi-100-5.ucode firmware: iwlwifi-1000-5.ucode firmware: iwlwifi-135-6.ucode firmware: iwlwifi-105-6.ucode firmware: iwlwifi-2030-6.ucode firmware: iwlwifi-2000-6.ucode firmware: iwlwifi-5150-2.ucode firmware: iwlwifi-5000-5.ucode firmware: iwlwifi-6000g2b-6.ucode firmware: iwlwifi-6000g2a-5.ucode firmware: iwlwifi-6050-5.ucode firmware: iwlwifi-6000-4.ucode firmware: iwlwifi-3160-7.ucode firmware: iwlwifi-7260-7.ucode srcversion: 1E6912E109D5A43B310FB34 alias: pci:v00008086d0000095Asv*sd00005490bc*sc*i* (a pack of lines of kind "alias: pci:xxxxx...." that I guess are not helpful) alias: pci:v00008086d0000095Bsv*sd00005290bc*sc*i* depends: cfg80211 intree: Y vermagic: 3.13.0-29-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: 66:02:CB:36:F1:31:3B:EA:01:C4:BD:A9:65:67:CF:A7:23:C9:70:D8 sig_hashalgo: sha512 parm: swcrypto:using crypto in software (default 0 [hardware]) (int) parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint) parm: amsdu_size_8K:enable 8K amsdu size (default 0) (int) parm: fw_restart:restart firmware in case of error (default true) (bool) parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) parm: nvm_file:NVM file name (charp) parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) parm: power_save:enable WiFi power management (default: disable) (bool) parm: power_level:default power save level (range from 1 - 5, default: 1) (int) I downloaded the latest versions of iwlwifi firmware from git (git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git; copy iwlwifi-3160-9.ucode iwlwifi-7260-9.ucode iwlwifi-7265-9.ucode to /lib/firmware and reboot) but as you can imagine it did not help. Update #1: Downloaded from http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=get&target=iwlwifi-7260-ucode-22.15.8.0.tgz and copied the file into /lib/firmware. After reloading it with modprobe, it seems to be OK: [ 14.761283] iwlwifi 0000:06:00.0: enabling device (0000 -> 0002) [ 14.761472] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 14.772478] iwlwifi 0000:06:00.0: loaded firmware version 22.15.8.0 op_mode iwlmvm [ 14.800274] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 14.800349] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 14.800657] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 15.007048] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' However, clicking in wifi in the toolbar still shows "device not managed". Any clues? Many thanks! Luis

Read the article

Start/Stop Window Service from ASP.NET page

- by kaushalparik27

Last week, I needed to complete one task on which I am going to blog about in this entry. The task is "Create a control panel like webpage to control (Start/Stop) Window Services which are part of my solution installed on computer where the main application is hosted". Here are the important points to accomplish:[1] You need to add System.ServiceProcess reference in your application. This namespace holds ServiceController Class to access the window service.[2] You need to check the status of the window services before you explicitly start or stop it.[3] By default, IIS application runs under ASP.NET account which doesn't have access rights permission to window service. So, Very Important part of the solution is: Impersonation. You need to impersonate the application/part of the code with the User Credentials which is having proper rights and permission to access the window service. If you try to access window service it will generate "access denied" error.The alternatives are: You can either impersonate whole application by adding Identity tag in web.cofig as: <identity impersonate="true" userName="" password=""/>This tag will be under System.Web section. the "userName" and "password" will be the credentials of the user which is having rights to access the window service. But, this would not be a wise and good solution; because you may not impersonate whole website like this just to have access window service (which is going to be a small part of code).Second alternative is: Only impersonate part of code where you need to access the window service to start or stop it. I opted this one. But, to be fair; I am really unaware of the code part for impersonation. So, I just googled it and injected the code in my solution in a separate class file named as "Impersonate" with required static methods. In Impersonate class; impersonateValidUser() is the method to impersonate a part of code and undoImpersonation() is the method to undo the impersonation. Below is one example: You need to provide domain name (which is "." if you are working on your home computer), username and password of appropriate user to impersonate.[4] Here, it is very important to note that: You need to have to store the Access Credentials (username and password) which you are going to user for impersonation; to some secured and encrypted format. I have used Machinekey Encryption to store the value encrypted value inside database.[5] So now; The real part is to start or stop a window service. You are almost done; because ServiceController class has simple Start() and Stop() methods to start or stop a window service. A ServiceController class has parametrized constructor that takes name of the service as parameter.Code to Start the window service: Code to Stop the window service: Isn't that too easy! ServiceController made it easy :) I have attached a working example with this post here to start/stop "SQLBrowser" service where you need to provide proper credentials who have permission to access to window service. hope it would helps./.

Read the article

BYOD is not a fashion statement; it’s an architectural shift - by Indus Khaitan

- by Greg Jensen

Ten years ago, if you asked a CIO, “how mobile is your enterprise?”. The answer would be, “100%, we give Blackberry to all our employees.”Few things have changed since then: 1. Smartphone form-factors have matured, especially after the launch of iPhone. 2. Rapid growth of productivity applications and services that enable creation and consumption of digital content 3. Pervasive mobile data connectivityThere are two threads emerging from the change. Users are rapidly mingling their personas of an individual as well as an employee. In the first second, posting a picture of a fancy dinner on Facebook, to creating an expense report for the same meal on the mobile device. Irrespective of the dual persona, a user’s personal and corporate lives intermingle freely on a single hardware and more often than not, it’s an employees personal smartphone being used for everything. A BYOD program enables IT to “control” an employee owned device, while enabling productivity. More often than not the objective of BYOD programs are financial; instead of the organization, an employee pays for it. More than a fancy device, BYOD initiatives have become sort of fashion statement, of corporate productivity, of letting employees be in-charge and a show of corporate empathy to not force an archaic form-factor in a world of new device launches every month. BYOD is no longer a means of effectively moving expense dollars and support costs. It does not matter who owns the device, it has to be protected. BYOD brings an architectural shift. BYOD is an architecture, which assumes that every device is vulnerable, not just what your employees have brought but what organizations have purchased for their employees. It's an architecture, which forces us to rethink how to provide productivity without comprising security.Why assume that every device is vulnerable? Mobile operating systems are rapidly evolving with leading upgrade announcement every other month. It is impossible for IT to catch-up. More than that, user’s are savvier than earlier. While IT could install locks at the doors to prevent intruders, it may degrade productivity—which incentivizes user’s to bypass restrictions. A rapidly evolving mobile ecosystem have moving parts which are vulnerable. Hence, creating a mobile security platform, which uses the fundamental blocks of BYOD architecture such as identity defragmentation, IT control and data isolation, ensures that the sprawl of corporate data is contained. In the next post, we’ll dig deeper into the BYOD architecture. Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;}

Read the article

Using the Onboard VGA output with a PCIe video card. Both nVidia

- by sebikul

I have 2 video cards, one On board, a nVidia 6150SE nForce 430 and a PCIe nVidia GeForce GT 220 1GB DDR2 RAM I have already configured the PCIe card to use the dual monitor feature, using the VGA and HDMI ports, but now I want to add a third monitor, using the On board VGA port I have managed to enable the On board graphics processor, which is taking 400MB of ram, but I cant manage to use it, nvidia-settings does not detect it, like it's not usable (but is there) My questions are the following: How can I manage to get the On board VGA display to work together with the PCIe graphics card? If possible, how can I recover those 400 MB the on board card is taking (even without being used) or how can I get it to use the PCIe card available memory? System Details: Linux 2.6.35-28-generic i686 Ubuntu 10.10 (All updates installed) NVIDIA Driver Version: 260.19.06 (Official) If more info is needed please let me know. Here is the lspci output when the On board card is disabled: 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP61 SMU (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 02:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) And this is when both are enabled: 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP61 SMU (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 02:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) Output of lshw -class display: *-display description: VGA compatible controller product: GT216 [GeForce GT 220] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:02:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:df000000-dfffffff memory:c0000000-cfffffff memory:da000000-dbffffff ioport:ef80(size=128) memory:def80000-deffffff *-display description: VGA compatible controller product: C61 [GeForce 6150SE nForce 430] vendor: nVidia Corporation physical id: d bus info: pci@0000:00:0d.0 version: a2 width: 64 bits clock: 66MHz capabilities: pm msi vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:22 memory:dd000000-ddffffff memory:b0000000-bfffffff memory:dc000000-dcffffff memory:deb40000-deb5ffff If what I'm looking for is not possible, please tell me, so I can disable the On board card and recover those 400MB of wasted RAM Thanks for your help!

Read the article

Silverlight Cream for March 23, 2010 -- #818

- by Dave Campbell

In this Issue: Max Paulousky, Jeremy Likness, Mark Tucker, Christian Schormann, Page Brooks, Brad Abrams(-2-), Jeff Wilcox, Unnir, Bea Stollnitz, John Papa and Adam Kinney, and Bill Reiss(-2-). Shoutouts: Ashish Shetty posted his material from his MIX10 presentation: Stepping outside the browser with Silverlight 4 Not Silverlight, but dang useful, Karl Shifflett posted a Visual Studio 2010 XAML Editor IntelliSense Presenter Extension Yavor Georgiev posted his MIX10 material: Two samples from today's MIX talk From SilverlightCream.com: GroupBox Sketching Control for WPF applications Using Blend Max Paulousky creates a GroupBox control for SketchFlow for WPF. He includes a link to an example of doing the same for Silverlight. Sequential Asynchronous Workflows in Silverlight using Coroutines Jeremy Likness' latest post begann with a post on the Silverlight.net forum and Rob Eisenburg's MVVM presentation from MIX10 resulting in the use of Wintellect's PowerThreading library (downloadable), and Coroutines. Windows Phone 7 UI Templates Mark Tucker has been putting a lot of thought into WP7 apps and produced 5 templates for building apps, downloadable in PowerPoint format. He's also looking to discuss this concept. Blend 4: About Path Layout, Part I Christian Schormann has a great tutorial up about Expression Blend 4 and path layout ... this is lots of great info, and it's only part 1! Custom Splash Screen for Windows Phone Page Brooks makes very quick work of showing how to add a splash screen to your WP7 app... very nice, Page! Silverlight 4 + RIA Services - Ready for Business: Exposing Data from Entity Framework Brad Abrams next post in the series is is on pulling your data from wherever it lives, and uses a DomainService to shape it for your Silverlight app. Silverlight 4 + RIA Services - Ready for Business: Consuming Data in the Silverlight Client Brad Abrams then discusses consuming that data in a Silverlight app. Not much code involvement at all.. great ROI :) Building Silverlight 3 and Silverlight 4 applications on a .NET 3.5 build machine Jeff Wilcox talks about building Silverlight 3 and Silverlight 4B both on a .NET 3.5 machine. He then adds in the Toolkit, and even WCF RIA Services. Expression Blend 4 - XAML generation tweaks Unnir demonstrates a few changes to Expression Blend 4 that produce more compact XAML. He's also asking for other examples you'd like to see tightened up. How can I sort a hierarchy? Bea Stollnitz posts plausible solutions to sorting data items at each level of a hierarchical UI, with descriptions of why they don't work, followed by the real deal... Silverlight and WPF. Silverlight Training Course (Silverlight 4) John Papa and Adam Kinney have posted a huge body of work to get us up-to-speed on Silverlight 4 -- a WhitePaper, hands-on labs, and an 8-unit course with 25 accompanying videos... geez... Silverlight game development on Windows Phone 7 Bill Reiss has a post up discussing game development on WP7 in general and then discusses his SilverSprite library, with a link to it. XNA or Silverlight for Windows Phone 7 game development? Bill Reiss next discusses the advantage of using Silverlight or XNA for your WP7 game development, and who better to discuss both? Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Escaping Generics with T4 Templates

- by Gavin Stevens

I've been doing some work with T4 templates lately and ran into an issue which I couldn't find an answer to anywhere. I finally figured it out, so I thought I'd share the solution. I was trying to generate a code class with a T4 template which used generics The end result a method like: public IEnumerator GetEnumerator() { return new TableEnumerator<Table>(_page); } the related section of the T4 template looks like this: public IEnumerator GetEnumerator() { return new TableEnumerator<#=renderClass.Name#>(_page); } But this of course is missing the Generic Syntax for < > which T4 complains about because < > are reserved. using syntax like <#<#><#=renderClass.Name#><#=<#> won't work becasue the TextTransformation engine chokes on them. resulting in : Error 2 The number of opening brackets ('<#') does not match the number of closing brackets ('#>') even trying to escape the characters won't work: <#\<#><#=renderClass.Name#><#\<#> this results in: Error 4 A Statement cannot appear after the first class feature in the template. Only boilerplate, expressions and other class features are allowed after the first class feature block. The final solution delcares a few strings to represent the literals like this: <#+ void RenderCollectionEnumerator(RenderCollection renderClass) { string open = "<"; string close =">"; #> public partial class <#=renderClass.Name#> : IEnumerable { private readonly PageBase _page; public <#=renderClass.Name#>(PageBase page) { _page = page; } public IEnumerator GetEnumerator() { return new TableEnumerator<#=open#><#=renderClass.Name#><#=close#>(_page); } } <#+ } #> This works, and everyone is happy, resulting in an automatically generated class enumerator, complete with generics! Hopefully this will save someone some time :)

Read the article

Installation procedure RAC One Node

- by rene.kundersma

Okay, In order to test RAC One Node, on my Oracle VM Laptop, I just: - installed Oracle VM 2.2 - Created two OEL 5.3 images The two images are fully prepared for Oracle 11gr2 Grid Infrastructure and 11gr2 RAC including four shared disks for ASM and private nics. After installation of the Oracle 11gr2 Grid Infrastructure and a "software only installation" of 11gr2 RAC, I installed patch 9004119 as you can see with the opatch lsinv output: This patch has the scripts required to administer RAC One Node, you will see them later. At the moment we have them available for Linux and Solaris. After installation of the patch, I created a RAC database with an instance on one node. Please note that the "Global Database Name" has to be the same as the SID prefix and should be less then or equal to 8 characters: When the database creation is done, first I create a service. This is because RAC One Node needs to be "initialized" each time you add a service: The service configuration details are: After creating the service, a script called raconeinit needs to run from $RDBMS_HOME/bin. This is a script supplied by the patch. I can imagine the next major patch set of 11gr2 has this scripts available by default. The script will configure the database to run on other nodes: After initialization, when you would run raconeinit again, you would see: So, now the configuration is ready and we are ready to run 'Omotion' and move the service around from one node to the other (yes, vm competitor: this is service is available during the migration, nice right ?) . Omotion is started by running Omotion. With Omotion -v you get verbose output: So, during the migration you will see the two instance active: And, after the migration, there is only one instance left on the new node:

Read the article

What is the difference between String and string in C#

- by SAMIR BHOGAYTA

string : ------ The string type represents a sequence of zero or more Unicode characters. string is an alias for String in the .NET Framework. 'string' is the intrinsic C# datatype, and is an alias for the system provided type "System.String". The C# specification states that as a matter of style the keyword ('string') is preferred over the full system type name (System.String, or String). Although string is a reference type, the equality operators (== and !=) are defined to compare the values of string objects, not references. This makes testing for string equality more intuitive. For example: String : ------ A String object is called immutable (read-only) because its value cannot be modified once it has been created. Methods that appear to modify a String object actually return a new String object that contains the modification. If it is necessary to modify the actual contents of a string-like object Difference between string & String : ---------- ------- ------ - ------ the string is usually used for declaration while String is used for accessing static string methods we can use 'string' do declare fields, properties etc that use the predefined type 'string', since the C# specification tells me this is good style. we can use 'String' to use system-defined methods, such as String.Compare etc. They are originally defined on 'System.String', not 'string'. 'string' is just an alias in this case. we can also use 'String' or 'System.Int32' when communicating with other system, especially if they are CLR-compliant. I.e. - if I get data from elsewhere, I'd deserialize it into a System.Int32 rather than an 'int', if the origin by definition was something else than a C# system.

Read the article

Adobe Photoshop CS5 vs Photoshop CS5 extended

- by Edward

Adobe Photoshop has been an industry standard for most web designers & photographers worldwide. Photoshop CS5 has made photography editing much more refined and the composition process has become much easier than ever before. To study the advantage of Photoshop CS5 extended over Photoshop CS5 we have written this comparison article, with both a Designer’s & Photographer’s perspective. Hopefully it shall help you in your buying/upgrade decision. Photoshop CS5 Photoshop CS5 has refining feature with powerful photography tools. It made editing process easy as fewer steps are involved to remove noise, add grain, create vignettes, correct lens distortions, sharpen, and create HDR images. It has quick image correction and color and tone control for professional purpose. Intelligent image editing and enhancement , extraordinary advanced compositing has made it a better tool than earlier versions for photographers. It allows users to accelerate workflow with fast performance on 64-bit Windows® and Mac hardware systems and smoother interactions due to more GPU-accelerated features. It also boasts of a state-of-the-art processing with Adobe Photoshop Camera Raw 6 and helps to maximize creative impact. It provides for tremendous precision and freedom. It allows user to easily select intricate image elements, such as hair and create realistic painting effects. It also allows to remove any image element and see the space fill in almost magically. It has easy access to core editing and streamlined work flow and flexible work ambience. It has creative tools and contents. Photoshop CS5 Extended Photoshop CS5 extended is quite innovative and has incorporated 3D elements to 2D artwork directly within digital imaging application, which enables user to do an easy on-ramp to 3D image creation. It also provides for 3D editing. It has intelligent image editing and enhancement. It offers advance composing and has extraordinary painting and drawing toolset. It provides for video and animation designing. It helps to work with specialized images for architecture, manufacturing, engineering, science, and medicine. Where CS5 extended scores over CS5 CS5 extended has many features, which were not included in CS5. These features make it score more over CS5. These features are: Technology for creating 3D extrusion 3D material library and picker Field depth for 3D 3D merging and scene composition improvements 3D workflow improvement Customization of 3D features Image based light source Shadow catcher for shadow creation Enhanced ray tracer Context sensitive widgets, which allows easy control of objects, lights and cameras. Overlays for materials and mesh boundaries Photoshop CS5 extended is far better than CS5 as it incorporates all the features of CS5 and have more advanced features. It allows 3D creation and editing and has other advanced tools to make it better. Redefining the Image-Editing Experience : A Photographer’s point of View Photoshop CS5 delivers amazing features and creative options so even new users can perform advanced image manipulations and compositions. Breath taking image intelligence behind Content-Aware Fill magically removes any image detail or object, examines the surroundings and seamlessly fills in the space left behind. Lighting, tone and noise of the surrounding area can be matched. New Refine Edge makes nearly-impossible image selections possible. Masking was never easier, the toughest types of edges, such as hair and foliage seem easier to fix. To sum up following are few advantages of CS5 extended over previous versions 64-bit processing Content Aware Fill Refine Edge, “makes nearly-impossible image selections impossible” HDR Pro, including ghost artifact removal and HDR toning, which gives the look of HDR with a single exposure New brush options Improved image management with enhanced Adobe Bridge Lens corrections Improved black-and-white conversions Puppet Warp: Precisely reposition or warp any image element Adobe Camera Raw 6 Upgrade Buy Online Pricing and Availability Adobe Photoshop CS5 and CS5 Extended are available through Adobe Authorized Resellers & the Adobe Store. Estimated street price for Adobe Photoshop CS5 is US$699 and US$999 for Photoshop CS5 Extended. Upgrade pricing and volume licensing are also available. Related posts:10 Free Alternatives for Adobe Photoshop Software Web based Alternatives to Photoshop 15 Useful Adobe Illustrator Tutorials For Designers

Read the article

Silverlight Cream for February 10, 2011 -- #1045

- by Dave Campbell

In this Issue: Mark Monster, Jaime Rodriguez, Mark Hopkins, WindowsPhoneGeek, David Anson, Jesse Liberty, Jeremy Likness, Martin Krüger(-2-), Beth Massi, Joost van Schaik, Laurent Bugnion, and Arik Poznanski. Above the Fold: Silverlight: "Parsing the Visual Tree with LINQ" Jeremy Likness WP7: "Silverlight-ready PNG encoder implementation shows one way to use .NET IEnumerables effectively" David Anson Lightswitch: "How to Send Automated Appointments from a LightSwitch Application" Beth Massi Shoutouts: Be sure to visit SilverlightShow... check out their top hits last week: SilverlightShow for Jan 31- Feb 06, 2011 Jaime Rodriguez has a post up that all the WP7 folks will be interested in: FAQ about copy paste functionality in upcoming release From SilverlightCream.com: Make use of WCF FaultContracts in Silverlight clients Mark Monster takes a shot at answering “The remote server returned an error: NotFound” while connecting to a WCF Service problem we all see. Communication between HTML in WebBrowser and Silverlight app Jaime Rodriguez responds to questions he received about communication between HTML and SIlverlight with this post about the bi-directional communication between the control and HTML. WP7 - Real Apps, Real Code Mark Hopkins has a post up about some WP7 starter kits that you can get all the source for and actually download the app from the Marketplace first to see if it interests you! WP7 AboutPrompt in depth WindowsPhoneGeek has this cool post up about the AboutPrompt from the Coding4Fun toolkit in detail... great diagrams showing where all the elements are and code examples with images. Silverlight-ready PNG encoder implementation shows one way to use .NET IEnumerables effectively David Anson describes why he took it upon himself to write his own png encoder for Silverlight... and we all thank him for doing so and providing us with the code! Navigation 101–Cancelling Navigation Jesse Liberty's latest WP7 From Scratch episode is up (number 32), and he's talking about Navigation and how to cancel it if you need to. Parsing the Visual Tree with LINQ Jeremy Likness demonstrates using LINQ to rat out information in the visual tree of your XAML. To Quote Jeremy: "you can easily check for intersections between elements and find any type of element no matter how deep within the tree it is". SpriteAnimationBehavior Martin Krüger has a couple more fun things in the Expression Gallery that I haven't discussed. First up is a behavior that animates up to 999 images and lets you control the FramesPerSecond... great demo on the ExpressionGallery to play with. Second alternative: Storyboard should not start before the Silverlight application is loaded Martin Krüger's latest is a way to programmatically wait for the Loaded event so that you know you can let your animations fly. How to Send Automated Appointments from a LightSwitch Application Beth Massi's latest Lightswitch post follows up her Outlook automation one with sending appointments using the standard iCalendar format... all the code included of course. The case for the Bindable Application Bar for Windows Phone 7 Joost van Schaik posts about a bindable Application Bar for your WP7 apps... grab the code and don't leave home without it :) MVVM Light V4 preview (BL0014) release notes Laurent Bugnion posted an update to MVVMLight to Codeplex a couple days ago. This is an early preview of what he plans on having in version 4, so check out the post for what's new and fun. Search Digg on Windows Phone 7 Arik Poznanski followed up his RSS post from last week with this one on searching Digg on WP7... and he's discussing and providing a utility class for doing it. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Search Results

Search found 24649 results on 986 pages for 'control characters'.

Page 483/986 | < Previous Page | 479 480 481 482 483 484 485 486 487 488 489 490 | Next Page >

- by kaleidoscope

- by Chris Hoffman

- by nikolaosk

- by thatjeffsmith

- by pinaldave

- by Ken Cox [MVP]

- by chung.wu

- by kyle.hatlestad

- by eJugnoo

- by hamsun

- by Kevin Shyr

- by Dave Campbell

- by Janice J. Heiss

- by Janice J. Heiss

- by luis

- by kaushalparik27

- by Greg Jensen

- by sebikul

- by Dave Campbell

- by Gavin Stevens

- by rene.kundersma

- by SAMIR BHOGAYTA

- by Edward

- by Dave Campbell

< Previous Page | 479 480 481 482 483 484 485 486 487 488 489 490 | Next Page >