Search Results

Search found 34337 results on 1374 pages for 'build machine'.

Page 486/1374 | < Previous Page | 482 483 484 485 486 487 488 489 490 491 492 493  | Next Page >

• Max. Temp. on Intel Burn Test for Stock Dell Precision T3500

  - by HK1

  I'm troubleshooting an issue on a Dell Precision T3500. As part of my troubleshooting I've decided to try running a stress test using Intel Burn Test software. This machine is a stock configuration with 12GB of RAM and a Xeon W3670 processor (nothing overclocked). When I run IBT using the standard mode, SpeedFan reports a processor temperature in excess of 80C. I've seen numbers as high as 90C but even at that temperature the machine does not become unstable or crash. However, it seems way too high. This processor has a TCase of 67.9C according to Intel's website. I'm guessing that means I'm in the danger zone any time I go over that temperature. I've checked the cooling system and everything looks fine. I've even took out the heat sink and reinstalled it with new thermal compound. This did not appear to make the problem better or worse. Is there a discrepancy somewhere here in the way temperatures are measured or displayed? I've also tried using HWMonitor from CPUID and it reports the same temperatures. Should I just let the Standard Test go and disregard the temperature outputs?

  Read the article

• How can I print from my lion mac mini to my windows XP, with simple file sharing?

  - by Jules

  I have quite a complicated setup, perhaps. And a lot of history on this issue, I'm hoping that I don't have to buy a new printer. I've got a HP Wireless USB Print Server, which requires client software, I can't just use it as an IP Printer. The HP software is pretty poor on the mac and is no longer supported and often locks up the printer server and takes some considerable effort to actually print something. Let alone if a windows machine attaches to it first. My printer is an Epson Stylus R285. However, the windows client software is fine and we can print from windows 7 / XP without problem. We have simple file sharing setup as this is the only way I could get windows XP to talk to windows 7. However, I can't seem to get my mac mini to connect as anything other than a guest to my xp machine, to connect to the shared printer. I'm not considering some kind of internet printing as this would seems the simplest solution. But I'm not sure what will work with my setup ?

  Read the article

• How to properly remove disk from PERC 6/i RAID controller ?

  - by Stefano Borini

  I have a Dell T710, coming with PERC 6/i RAID controller. The current raid has 2x500 GB hard drives (with the OS), and 6x1000 GB hard drives (in RAID-6, currently empty). I would like to take one 1000 GB disk physically out to keep as an immediate spare in case of a crash, and configure the remaining 5x1000 GB in a single VD RAID-6. This is all nice and clean and works, until I realized that the display on the machine reports the lack of the 8th disk as an error. It's marked as error, but appears to be a warning, since the machine is fully functional. My question is: what is the best way to keep one disk as a spare out of the array? should I disassemble the disk from the cradle and insert the empty cradle in the array ? Or should I just silence the error in the display in some way (how?). I know that what I am doing sounds pretty strange, but here is academia and having a spare disk available could take weeks. Better to have one ready in my drawer for any emergency.

  Read the article

• Windows 7 Professional Cannot Connect to Share - Wrong password

  - by henryford

  I know that this question has actually been asked a few times before, but every solution I found didn't yield any results on my end, I can't get my head around it: When I am trying to connect to a share on the network, I always get the response "The specified network password is incorrect". However, the password is definetly correct and it works if I connect from another machine. I changed the LAN Manager authentication level to "Send LM & NTLM - use NTLMv2 session security if negiotated", I configured Kerberos encryption types to include all suites, rebooted (several times), but still - no luck. I can connect if I use my regular account with which I am logged in, but I need to connect with a different user since my log-in user has not enough privileges on the share. When I do that, the error above comes up. I'm really frustrated at the moment, this problem is driving me crazy. I'd be gladful for any possible solution to this. At the moment I'm using a workaround: I connect to a different machine via RDP, login with the user I have to use for the network-share connection and then I can map the drive and copy/paste from the RDP session to my local workstation. This is also working when I am connecting via RDP with my current login user and map the drive with the other user who has sufficent privileges. Tanks in advance, Thomas

  Read the article

• Dell Latitude D510 Runs From Battery But Not AC Adapter

  - by Jason George

  I have a Dell Latitude D510 that went belly up around two years ago. It will run from the battery, however, the wall adapter will neither power the machine nor charge the battery. Once the battery is dead, the machine is dead. Since it died I've searched repeatedly for solutions. I've tried a new AC adapter and even removed and replaced the DC jack thinking one of the solder joints might be bad. Both to no avail. After two years of searching I finally found the answer today. Since it's such a simple fix and I had such a hard time finding it I wanted to post the info for others (as it is apparently a common issue with the D510). -----SOLUTION----- It seems this is commonly caused by a cracked solder joint at pin 1 on an inductor filter pair (FL2) near the power jack. Pins 1 and 4 are ground and pins 2 and 3 are power. There should be 20V from 1 to 2 and 3. Anything less indicates a cracked joint that is increasing resistance and dropping the supply voltage. Repair simply requires reflowing all four pins with a little added solder for security. Detailed instructions can be found here. Dell Latitude D510 solder problem

  Read the article

• Can a folder on a NAS be made available as a physical drive in VMWare?

  - by asbjornu

  We are currently in the process of moving from a single web server to two load balanced web servers and are facing some challenges we don't quite know how to fix. One of these is that the current single server hosts applications that write stuff to disk. The applications running on the server expects that when something is written to disk it later will in fact exist, so it's important that this premise is fulfilled with the dual server architecture as well. The dual server setup is a couple of VMWare instances with Windows Server 2008 R2 as the guest operating system. Out of the box, these instances does not share any kind of file system, so just moving the applications over would make them break since one instance would write something to the file system that doesn't exist on the other. Thus we need to share a file system between the two virtual servers. Our host has proposed to create a network share on a SAN and map this share individually on each virtual machine. This doesn't work too well due to NTFS permissions, etc., because the share needs to be accessed by several independent web applications that won't even be in the same application pool. The only solution that kind of works is to hard code an "identity" for each web application into its web.config file, but this means password in clear text which doesn't sit well with me. Since the servers are virtual, I'm thinknig: Wouldn't it be possible to make a NAS area available as a physical disk in the gues operating system somehow? Since VMWare has full control of the virtual hardware, you'd think it would be able to "fake" a local hard drive in the virtual machine that in reality is a folder on a NAS, but so far I haven't found anything that states how and if this is possible. So I have to ask the wonderful Server Fault community: Can a folder on a NAS be made available as a physical drive (typical D:) in both of the virtual machines?

  Read the article

• MySQL slave server from dumps

  - by HTF

  I've created a slave server from live machine which is acting as a master now. I use the following procedure to create it: mysqldump --opt -Q -B --master-data=2 --all-databases > dump.sql then I imported this dump on the new machine, applied the "CHANGE MASTER TO..." directive with a log file/position from the dump. Please note that I have around 8000 databases and I didn't stop the master while the dumps were running. The replication works fine but is this a properly method for creating a slave server? I'm planning to promote this slave to a master (different location) so I would like to make sure that there is a 100% data consistency between the servers. I've found this article where it says: The naive approach is just to use mysqldump to export a copy of the master and load it on the slave server. This works if you only have one database. With multiple database, you'll end up with inconsistent data. Mysqldump will dump data from each database on the server in a different transaction. That means that your export will have data from a different point in time for each database. Thank you

  Read the article

• then an error occurred during the login process - Connection Error 233

  - by scott brunner

  We have SQL Server 2008 installed on 64Bit Windows Server 2003. When we try connect to the local SQL Server using SQL Server Management Studio at the console, we get the error: A connection was successfully established with the server, but then an error occurred during the login process. provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe. When we try TCP from same local SSMS to local server, we get the same error but intead of the pipe message its something like "connection forcibly closed". Now, here is the strange part - we CAN connect to this SQL Server from any other machine on the network using SSMS. - AND - WE CAN'T connect to ANY SQL Server from the problem server. So it seems the SQL Server instance is fine and accepting remote connections. However, the SSMS on that machine will not connect to any SQL Server even remotely. When we try an ADO.NET connection from C# remotely we can connect, run that same code on the console of the trouble server and we get the same errors. How can this be solved?

  Read the article

• Why can't I see all of the client certificates available when I visit my web site locally on Windows 7 IIS 7?

  - by Jay

  My team has recently moved to Windows 7 for our developer machines. We are attempting to configure IIS for application testing. Our application requires SSL and client certificates in order to authenticate. What I've done: I have configured IIS to require SSL and require (and tried accept) certificates under SSL Settings. I have created the https binding and set it to the proper server certificate. I've installed all the root and intermediate chain certificates for the soft certificates properly in current user and local machine stores. The problem When I browse to the web site, the SSL connection is established and I am prompted to choose a certificate. The issue is that the certificate is one that is created by my company that would be invalid for use in the application. I am not given the soft certificates that I have installed using MMC and IE. We are able to utilize the soft certs from our development machines to our Windows 2008 servers that host the application. What I did: I have attempted to copy the Root CA to every folder location for the Current User and Location Machine account stores that the company certificate's root is in. My questions: Could I be mishandling the certs anywhere else? Could there be a local/group policy that could be blocking the other certs from use? What (if anything) should have to be done differently on Windows 7 from 2008 in regards to IIS? Thanks for your help.

  Read the article

• Problem with Outlook 2010 (SMTP AUTH LOGIN)

  - by Filipe YaBa Polido

  **IGNORE THIS QUESTION - SOLVED WITH A PYTHON SCRIPT available at: http://yabahaus.blogspot.com I have to connect one customer Outlook 2010 to a remote server on which I have either no right, neither way to talk to the sysadmin. This is the thing, after installing and reviewing the logs on Wireshark: Outlook Express: HELO machine AUTH LOGIN username base64 encoded password base64 encoded mails go through. Outlook 2010: HELO machine AUTH DIGEST-MD5 response from server Outlook sends just a * AUTH LOGIN password base64 encoded So... I can send mails in the same domain, but can't send outside, it gives me a relay denied message. My point is... Why the h**l Outlook 2010 doesn't send the username AND the password?! It can never login the right way :| With other versions of Outlook it works fine, and with OE works great, it auths and allows to send mail to a different domain. I've googled and nothing worked. I'm pretty sure that I'm not alone with this one. My last resort will be to configure a local proxy/server that relays to the original one :| Any help would be appreciated. Sorry my bad english as is not my natural language. Thanks.

  Read the article

• Transferring an SQL Processor License to a virtual hosted environment

  - by Andrew Shepherd

  My company is currently hosting a service in-house, and we want to move to an externally hosted environment. We would then be using a virtual server. I understand that this might be spread across multiple machines, but from my perspective as a customer, this layer is abstracted away - I shouldn't know or care about the hardware that the OS is hosted on. We have a licensed edition of SQL Server 2008. This is one Processor license. Will it be a violation of the licensing agreement to use this in a virtual environment. From the reference guide here it says When licensed Per Processor With Workgroup, Web, and Standard editions, for each server to which you have assigned the required number of per processor licenses, you may run, at any one time, any number of instances of the server software in physical and virtual operating system environments on the licensed server. However, the total number of physical and virtual processors used by those operating system environments cannot exceed the number of software licenses assigned to that server For enterprise edition there is an added option: if all physical processors in a machine have been licensed, then you may run unlimited instances of SQL server 2008 in one physical and an unlimited number of virtual operating environments on that same machine. I'm having trouble getting my head around this. Would I theoretically have to get a license for every processor in this virtual environment (which is effectively impossible because I have no way of knowing how many processors there actually are)? Or can I just say that it's hosted on one "virtual" server, so that's OK?

  Read the article

• Administrative shares in Windows 7 Pro not visible

  - by Chris Tybur

  My desktop machine has a clean install of Windows 7 Professional. For some reason the standard administrative shares Admin$, C$, D$, etc are not visible, either in Computer Management - Shared Folders - Shares or via net share. I also have a laptop with a clean install of Windows 7 Professional, and I can see the admin shares in both places. As such, I can map to \\laptop\c$ from the desktop, but I can't map to \\desktop\c$ from the laptop. I pretty much took the defaults during the Windows 7 installations. I've tried adding LocalAccountTokenFilterPolicy to the registry on the desktop, but that didn't work. On the desktop I've also disabled UAC, turned off Windows firewall, removed it from a homegroup, made sure file and printer sharing is turned on, but nothing has worked. There is some subtle difference between the two machines that I can't seem to find. I'm logging into both machines using a local account that is in the Administrators group. Both accounts have the same name and password. I really don't want to have to create a new share for the desktop's C drive, especially since C$ is visible and working on the laptop and therefore I should be able to make it work on the desktop. Any idea why the admin shares would work on one machine and not another? Or why LocalAccountTokenFilterPolicy would fail?

  Read the article

• How to merge arbitrary snapshot into base vdi in Virtualbox

  - by jmathew

  I botched a transfer of a VM from one harddisk to the other. Now I'm left with the base vdi and a whole bunch of snapshots. My steps Copied old VM directory over to new HDD Deleted old VM and added new VM using using Machine-add and providing the old XML file Couldn't add base vdi file due to conflict so changed the UUID of base vdi with VBOXMANGE.EXE internalcommands sethduuid <path/to/vdi> Attempt to rollback to a snapshot, but it seems the VM is looking for the snapshots on the old HDD (which is formatted and gone) This is the error (networked is the name): Failed to restore the snapshot networked of the virtual machine lfs. Could not open the medium 'H:\vm\ft.vdi'. VD: error VERR_PATH_NOT_FOUND opening image file 'H:\vm\ft.vdi' (VERR_PATH_NOT_FOUND). Result Code: E_FAIL (0x80004005) Component: Medium Interface: IMedium {53f9cc0c-e0fd-40a5-a404-a7a5272082cd} The old HDD was drive H: the new one is drive N: How can I modify the snapshots/VM to look in N:\vm\ft.vdi for the base vdi? I've already set the default settings in VirtualBox in general (default vm/vm snapshot location). Or if not that how can I merge the old snap shot with the base vdi given that the only things that have changed is the base vdi's UUID?

  Read the article

• explanation of RAM specs, and what do I need for a Gaming rig

  - by ewok

  I am looking into upgrading my custom built PC's RAM. I use the machine mostly for gaming, but I don't really know a ton about RAM, so I wanted to ask a few questions. The research I've done tells me there is a negligible increase in speed for anything above 1600 MHz. is this true or is it worth the extra money to go higher? Other than drawing more power from the PSU, is there any real difference in performance with different voltages (1.5V vs 1.65V)? most of the kits I've found in the 2x4 1600 range have a CAS latency of 9 and timing of 9-9-9-24. For a significant increase in price (usually about 1.5x), I can get either 8 or 7 and lower timing. Is it worth the cost? What I am looking for here is someone to give a good explanation of what the different specs represent, and how that relates to the performance of the machine. Specifically, I'm looking for what specs I need to focus on for a good gaming rig. I am NOT looking for a "buy this, it's the best RAM" without an explanation of why. The information will be much more valuable as it will allow me to make my own informed decision. As they say, give a man a fish, he'll eat for a day. teach a man to fish, and he'll eat for the rest of his life.

  Read the article

• How can I automatically synchronize a directory tree on multiple machines?

  - by Blacklight Shining

  I have two Mac laptops and a Debian server, each with a directory that I would like to keep in sync between the three. The solution should meet the following criteria (in rough order of importance): It must not use any third-party service (e.g. Dropbox, SugarSync, Google whatever). This does not include installing additional software (as long as it's free). It must not require me to use specific directories or change my way of storing things. (Dropbox does this IIRC) It must work in all directions (changes made on /any/ machine should be pushed to the others) All data sent must be encrypted (I have ssh keypairs set up already) It must work even when not all machines are available (changes should be pushed to a machine when it comes back online) It must work even when the /directories/ on some machines are not available (they may be stored on disk images which will not always be mounted) This can be solved for Macs by using launchd to automatically launch and kill (or in some way change the behavior of) whatever daemon is used for syncing when the images are mounted and unmounted. It must be immediate (using an event-based system, not a periodic one like cron) It must be flexible (if more machines are added, I should be able to incorporate them easily) I also have some preferences that I would like to be fulfilled, but do not have to be: It should notify me somehow if there are conflicts or other errors. It should recognize symbolic and hard links and create corresponding ones. It should allow me to create a list of exceptions (subdirectories which will not be synced at all). It should not require me to set up port forwarding or otherwise reconfigure a network. This can be solved by using an ssh tunnel with reverse port forwarding. If you have a solution that meets some, but not all of the criteria, please contribute it in the comments as it might be useful in some way, and it might be possible to meet some of the criteria separately. What I tried, and why it didn't work: rsync and lsyncd do not support bidirectional synchronization csync2 is designed for server clusters and does not appear to work with machines with dynamic IPs DRBD (suggested by amotzg) involves installing a kernel module and does not appear to work on systems running OS X

  Read the article

• What is the recommended glusterFS configuration for a growing website?

  - by montana

  Hello, I have a website that is tracking towards 50 million hits per day average, and within the next 3 months should be over 100 million hits per day. We are trying to use GlusterFS v 3.0.0 (with latest patches as of 1-17-2010) Currently, we've just upgraded to a load balancer environment that has 3 physical hosts with 6 Xen-Server 5.5u1 VM's (2 on each host) to serve webpage traffic. Each machine has 6 Raid-6 local storage drives (7200RPM-SATA). The old machine we came from had 1 mirrored SAS 10k drive. We also set up glusterFS currently with 3 bricks, one on each host, and it is serving the 6 VM's as clients. In testing, everything seemed fine. However when we went to production, it seemed that there just wasn't enough I/O's available to serve traffic even upwards of 15mil hits. Weeks prior, our old server was able to handle traffic, maxed out, at 20mil. Is there any recommended configurations for such an application, or things to be aware of that isn't apparent with their documentation at gluster.org for a site our size?

  Read the article

• Can Dovecot IMAP automatically create Maildir folders for new (virtual) users?

  - by user233441

  everyone. I am learning to set up a dovecot home IMAP server using a virtual Ubuntu 12.04 machine. My intention is eventually to have a home server that uses POP3 to take email from several addresses and remove them from my ISP's servers, while making them accessible through a home IMAP server (this is similar to the setup described at https://help.ubuntu.com/community/POP3Aggregator, which explains how to set up the system with dovecot version 1, and is thus outdated). I intend to use the ISP's server directly when sending messages, and to BCC all sent messages to myself. I've completed the basic set up of the test server: getmail uses POP3 to fetch messages from two test email accounts, and successfully delivers them to the respective Maildir-style new folders on the virtual machine. Dovecot then successfully sees these messages. I have two questions: 1) I had to set up new, cur, and tmp folders for both of the test accounts manually to get this setup to work. Is there a way to get dovecot to create these Maildir folders automatically when I create a new virtual user account (e.g., when I add a user and password combination to my dovecot password file), or is it expected that I write a bash script to automate that task? 2) I would welcome any comments you have on how this approach could be improved as I learn to set it up. My motivations with this approach are 1) to enable archiving/storing emails from several hosting providers that impose a cap on server storage, and 2) to give me somewhat greater control over email storage without requiring that I set up and administrate a mail server from scratch (which I'm not yet prepared to do) (this follows the recommendations at https://ssd.eff.org/tech/email). Thank you!

  Read the article

• How to go about rotating logs which are arbitrary named and placed in deeply nested directories?

  - by Roman Grazhdan

  I have a couple of hosts which are basically a playground for developers. On these hosts, each of them has a directory under /tmp where he is free to do all he wants - store files, write logs etc. Of course, the logs are to be rotated, or else the disc will be 100% full in a week. The files can be plenty, but I've dealt with it with paths like /tmp/[a-e]*/* and so on and lived happily for a while, but as they try new cool stuff on the machine logrotate rules grow ugly and unmanageable, and it's getting more difficult to understand which files hit the glob. Also, logrotate would segfault if asked to rotate a socket. I don't feel like trying to enforce some naming policies in that environment, I think it's going to take quite a lot of time and get people annoyed and still would fail at some point. And I still need to manage the logs, not just rm the dirs at night. So is it a good idea in circumstances like these to write a script which would handle these temporary files? I prefer sticking with standard utilities whenever possible, but here I think logrotate is getting less and less manageable. And probably someone heard of some logrotate alternatives which would work well in such an environment? I don't need emailing logs or some other advanced features, so theoretically some well commented find | xargs would do. P.S. I do have a log aggregator but this stuff is not going to touch my little cute logstash machine.

  Read the article

• How can I determine what is killing my network adapter win7 or vista?

  - by datatoo

  I thought this issue was like another person here, and that downloading the nvidia chipset drivers was the solution. However that is not all that is going on. This machine had Vista 64bit and is now Win7. Same issue with both. I have explicitly been denying network driver updates since getting things working again and when a Windows updates occurs on seemingly benign Office updates the adapter fails to work. Is the update process somehow protecting this machine by turning off things and it fails to recover connectivity after a restart? All that seems to ever work is a system restore. Which does work. Since there are 25 pending updates asking to do there thing, I hate to think this is a one by one update test to find the culprit. Any ideas? This has an integrated nic, video, and I guess audio on the motherboard. ES5200 intel cpu on a gateway 4800-05e I am not quite sure how to determine the actual network adapter. This is a wired adapter. I suppose worst case I can try another adapter if this keeps happening.

  Read the article

• All network devices freezing when Airport Extreme Base Station is connected. Any ideas?

  - by Jon

  I've been troubleshooting this issue for a while, and through a series of events have it narrowed down to my airport extreme base station. I like this router, since I'm able to connect to IPV6 sites without any insane configuration (my alternate router is too old and doesn't support v6). My question is: Has anyone else had this issue, if so how is it resolved? If not, can you recommend a good IPv6 router? Here is how I came to the conclusion that it is the router: Devices: XBOX 360, HTC Incredible, Home-Built machine running FreeBSD, Home-Built machine running Ubuntu 10.04. 1.) Noticed freezing on Ubuntu Box. 2.) Noticed freezing on XBOX360 3.) Noticed freezing on HTC Incredible (only when connected to my network wirelessly). The above all happened at random times throughout the past few weeks. Over the last few days, I was playing XBOX and noticed that the XBOX and Ubuntu machines both froze. I picked up my phone, and it was also frozen. I reset all devices, power-cycled my router, and all was fine again. About two hours later, it happened again (I was playing Forza III, the XBOX froze; I went to the Ubuntu box and it was frozen; unfortunately, the HTC phone was not connected wirelessly, and the FreeBSD box was turned off). I can't even begin to imaging what a router could be doing to freeze devices with such differing hardware/software/OS, and I feel absurd for coming to this conclusion, but I have nothing else. I hooked up my archaic Netgear router, and have had no problems since. :(

  Read the article

• How to configure a Linux kernel based on the modules currently in use?

  - by Carla

  Hello, I'm willing to build a minimal kernel with only the needed things for my machine; so I started by compiling the kernel from the ground up, using the default configuration and adding things that I know for sure I have (i.e.: Ethernet card, WiFi card, ...). But there are several other things not so easy to know about (i.e.: the watchdog timer) so I came across AutoKernConf which supposedly detects the hardware of the machine and generates a kernel configuration file with the settings for the found devices. The problem is it contained several settings repeated and even some which I don't have (I'm using a Dell laptop and one of the things it "found" was something of a Toshiba one). So I ended up building a kernel with the configuration that came out of the make allmodconfig command, which is a kernel with most of the things compiled as modules. Booting into that kernel and running lsmod I can see all of the kernel modules in use (the ones really needed) and I would like to know if there is a tool or some way for me to parse that list and convert it to the corresponding kernel configuration file. Or how to map each one with the appropriate options in the kernel so that I can manually set them. Thank you very much for your time.

  Read the article

• Deploying a Django application in a virtual Ubuntu Server

  - by mfsaint

  I have a virtualbox machine running Ubuntu Server 10.04LTS. My intention is to this machine to work like a VPS, this way I can learn and prepare for when I get a VPS service. Apache+mod_wsgi for deploying the Django app seems the right choice to me. I have the domain (marianofalcon.com.ar) but nothing else, no DNS. The problem is that I'm pretty lost with all the deployment stuff. I know how to configure mod_wsgi(with the django.wsgi file) and apache(creating a VirtualHost). Something is missing and I don't know what it is. I think that I lack networking skills ant that's the big problem. Trying to host the app on a virtualbox adds some difficulty because I don't know well what IP to use. This is what I've got: file placed at: /etc/apache2/sites-available: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] ServerName www.my-domain.com ServerAlias my-domain.com Alias /media /path/to/my/project/media DocumentRoot /path/to/my/project WSGIScriptAlias / /path/to/your/project/apache/django.wsgi ErrorLog /var/log/apache2/error.log LogLevel warn CustomLog /var/log/apache2/access.log combined </VirtualHost> django.wsgi file: import os, sys wsgi_dir = os.path.abspath(os.path.dirname(__file__)) project_dir = os.path.dirname(wsgi_dir) sys.path.append(project_dir) project_settings = os.path.join(project_dir,'settings') os.environ['DJANGO_SETTINGS_MODULE'] = 'myproject.settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler()

  Read the article

• How to verify power provided to processors is clean

  - by GregC

  Once in a blue moon, I am seeing a blue screen of death on a shiny new Dell R7610 with a single 1100 Watt Dell-provided power supply on a beefy UPS. BCode is 101 (A clock interrupt was not received...), which some say is caused by under-volting a CPU. Naturally, I would have to contact Dell support, and their natural reaction would be to replace a motherboard, a power supply, or CPU, or a mixture of the above components. In synthetic benchmarks, system memory and CPU, as well as graphics memory and CPU perform admirably, staying up for hours and days. My questions are: Is power supply good enough for the application? Does it provide clean enough power to VRMs on the motherboard? Are VRMs good enough for dual Xeon E5-2665? Does C-states logic work correctly? Is there sufficient current provided to PCIe peripherals, such as disk controllers? P.S. Recently, I've gone through the ordeal with HP. They were nice and professional about it, but root cause was not established, and the HP machine still is less than 100%, giving me a blue screen of death once in a couple of months. Here's what quick web-searching turns up: http://www.sevenforums.com/bsod-help-support/35427-win-7-clock-interrupt-bsod-101-error.html#post356791 It appears Dell has addressed the above issue by clocking PCIe bus down to 5GT/sec in A03 BIOS. My disk controllers support PCIe 3.0, meaning that I would have to re-validate stability. Early testing shows improvements. Further testing shows significant decrease in performance on each of the x16 slots with Dell R7610 with A03 BIOS. But now it's running stable. HP machine has received a microcode update in September 2013 SUM (July BIOS) that makes it stable.

  Read the article

• Only tunnel certain applications via OpenVPN

  - by jinjin

  Hi, I've purchased a VPN solution, it works correctly when I have "redirect-gateway def1" in the configuration file (routing all traffic through the VPN). However when I remove that line from the configuration file, I am still able to ping-out of the machine (ping -I tap0), however I cannot ping the IP assigned to the machine (it's a public ip), i get the error: Destination Host Unreachable. I only want to have certain applications sending traffic through the VPN tunnel (eg: ZNC, irssi), all of which i can select which IP they use. However they can't recieve any data, making the tunnel essentially useless to me when disabling redirect-gateway. Any ideas on how to allow specific applications use the tunnel, without of forcing everything to go through it? My configuration file is as follows: dev tap remote #.#.#.# float #.#.#.# port 5129 comp-lzo ifconfig #.#.#.# 255.255.255.128 route-gateway #.#.#.# #redirect-gateway def1 secret key.txt cipher AES-128-CBC The output of ifconfig -a when the tunnel is connected: tap0 Link encap:Ethernet HWaddr 00:ff:47:d3:6d:f3 inet addr:#.#.#.# Bcast:#.#.#.# Mask:255.255.255.255 inet6 addr: <snip> Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:612 errors:0 dropped:0 overruns:0 frame:0 TX packets:35 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:25704 (25.1 KiB) TX bytes:6427 (6.2 KiB) EDIT: the Bcast:#.#.#.# (ifconfig) is different from route-gateway #.#.#.# (openvpn) if that makes any difference.

  Read the article

• Has anyone had luck running 802.1x over ethernet using the stock Windows or other free supplicant?

  - by maxxpower

  I just wanted to see if anyone else has had luck implementing 802.1x over ethernet. So here's my basic setup. Switch sends out 3 eapol messages spaced out 5 seconds apart. if there's no response the machine gets put on a guest vlan with restricted access. If the machine is properly configured it will authenticate and be placed into a secure vlan. About 10% of my windows xp users are getting self assigned 169 addresses. I've used the Odyssey Access Client and it worked without a hitch. I'm using the setting to automatically use the users windows login to authenticate, but it's workign on 90% of the machines so I don't think that's the issue. Checking the logs on the dc it seems that the machines are trying to authenticate with computer credentials even though they are configured not to. I'm running Juniper switches with IAS for radius. I have radius configured for PEAP and MSvhapv2. Macs and linux boxes seem to have no issues authenticating. One last thing to add If I unplugging the ethernet cable and plug it back in usually resolves the issue, but I'd hardly call that acceptable for production. Kinda long winded and specific for a discussion, but just want to see if anyone else has had similar issues or experiences, or if anyone knows of a free XP supplicant that actually works with 802.1x over ethernet.

  Read the article

< Previous Page | 482 483 484 485 486 487 488 489 490 491 492 493  | Next Page >