Search Results

Search found 16914 results on 677 pages for 'single threaded'.

Page 487/677 | < Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >

  • Triple boot WIndows 7, Windows 8, and Mountain Lion on Macbook Pro

    - by Nathan
    Ok, So I have a bit of a unique situation here I could use some help on. I've modded my summer 2011 MBPro to have 2 harddrives by replacing the optical drive. OSX Mountain Lion is installed on a single partition of a 120GB SSD. The second drive is 750GB, partitioned as 550GB, 150GB, and ~50GB. I've set the 550GB to act as my OSX homefolder, but I'd like to install windows 7 and Windows 8 on the remaining partitions. It Took a while, but by following this guide, I eventually found a way to install Windows without a CD/DVD drive by following this http://huguesval.com/blog/2012/02/installing-windows-7-on-a-mac-without-superdrive-with-virtualbox/ It worked flawlessly for creating both windows 7 and windows 8 images that I could clone onto FAT32 partitions. However, I have encountered a problem when trying to triple boot. After I put Windows 8 onto the ~50GB partition and tried to boot into windows 7 I get an error that says something like: error: 0x0000000e The Boot selection failed because the required device is inaccessible. If I re-clone the windows 7 image onto the drive and select the option to "replace BCD" file for the drive, windows 7 will boot but windows 8 now gives me the same exact error. I realize this is a pretty extensive setup, but if anyone has some insight I'd love to hear it.

    Read the article

  • ./rtnet start rteth0-mac: unknown interface: No such device ioctl: No such device

    - by Anisha Kaul
    I have installed the RTnet over Xenomai. RTnet compiled well, and I also tested loopback on the single machine and was able to ping. However I noticed ./rtnet start showing the following output: What should I interpret when all it says is "no such device"? What more info should I provide here for you to help me in getting rid of this error? linux-y3pi:/usr/local/rtnet/sbin # ./rtnet start rteth0: unknown interface: No such device rteth0-mac: unknown interface: No such device ioctl: No such device ioctl: No such device ioctl: No such device ioctl: No such device ioctl (add): No such device vnic0: unknown interface: No such device SIOCSIFADDR: No such device vnic0: unknown interface: No such device SIOCSIFNETMASK: No such device Waiting for all slaves...ioctl: No such device ioctl: No such device linux-y3pi:/usr/local/rtnet/sbin # lsmod: linux-y3pi:/usr/local/rtnet/sbin # lsmod Module Size Used by tdma 18281 0 rtmac 9274 1 tdma rtcfg 49485 0 rtcap 7216 0 rt_loopback 1563 2 rtpacket 5517 0 rtudp 10655 0 rt_8139too 11374 0 rtipv4 22842 2 rtcfg,rtudp rtnet 42130 9 tdma,rtmac,rtcfg,rtcap,rt_loopback,rtpacket,rtudp,rt_8139too,rtipv4 ip6t_LOG 8480 6 xt_tcpudp 3540 2 xt_pkttype 1176 3 ipt_LOG 8201 6 xt_limit 2159 12 snd_pcm_oss 44878 0 snd_mixer_oss 15151 1 snd_pcm_oss snd_seq 55731 0 s nd_seq_device 6698 1 snd_seq edd 8407 0 ip6t_REJECT 4306 3 nf_conntrack_ipv6 8186 4 nf_defrag_ipv6 10128 1 nf_conntrack_ipv6 ip6table_raw 1451 1 xt_NOTRACK 1112 4 ipt_REJECT 2397 3 xt_state 1314 8 iptable_raw 1478 1 iptable_filter 1706 1 ip6table_mangle 1756 0 nf_conntrack_netbios_ns 1678 0 nf_conntrack_ipv4 8957 4 nf_conntrack 80411 5 nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntrack_netbios_ns,nf_conntrack_ipv4 nf_defrag_ipv4 1561 1 nf_conntrack_ipv4 ip_tables 18872 2 iptable_raw,iptable_filter ip6table_filter 1679 1 ip6_tables 19066 4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter x_tables 24094 16 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,ip6table_raw,xt_NOTRACK,ipt_REJECT,xt_state,iptable_raw,iptable_filter,ip6table_mangle,ip_tables,ip6table_filter,ip6_tables fuse 69279 3 loop 17417 0 dm_mod 71671 0 snd_hda_codec_via 57768 1 snd_hda_intel 24871 2 snd_hda_codec 95006 2 snd_hda_codec_via,snd_hda_intel snd_hwdep 6540 1 snd_hda_codec snd_pcm 90716 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec snd_timer 22050 2 snd_seq,snd_pcm snd 71410 14 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer soundcore 7854 1 snd iTCO_wdt 11716 0 iTCO_vendor_support 2942 1 iTCO_wdt snd_page_alloc 8324 2 snd_hda_intel,snd_pcm sr_mod 13186 0 cdrom 37628 1 sr_mod i2c_i801 9677 0 pcspkr 1950 0 sg 28847 0 serio_raw 4534 0 ext4 361361 2 jbd2 82943 1 ext4 crc16 1699 1 ext4 i915 500199 2 drm_kms_helper 33537 1 i915 drm 211193 3 i915,drm_kms_helper sd_mod 33977 5 i2c_algo_bit 5625 1 i915 intel_agp 11529 1 i915 intel_gtt 16397 3 i915,intel_agp ata_generic 3787 0 ata_piix 22875 4 ahci 20097 0 libahci 22089 1 ahci libata 194812 4 ata_generic,ata_piix,ahci,libahci scsi_mod 204709 4 sr_mod,sg,sd_mod,libata linux-y3pi:/usr/local/rtnet/sbin #

    Read the article

  • Reloading NAT configuration on a running VMWare Server 2.0.2

    - by Jonathan Clarke
    I have a server running VMWare Server 2.0.2. The host is Debian Lenny. I have 15-20 virtual machines running, all attached to a single NAT network (named vmnet8). I have configured VMWare's NAT (the vmnet-natd daemon) to forward some incoming to ports to one of the VMs, since it hosts some publicly accessible services. I did this via the file /etc/vmware/vmnet8/nat/nat.conf by adding lines like the following: 80 = 192.168.100.100:80 This works great, I can reach the web server on the VM at 192.168.100.100 by connecting to the host's IP address. Sometimes, I need to add port redirections to this NAT configuration. So, I add a line to the configuration file. Now for the question. How do I make the natd process take this new configuration into account? Clearly, restarting the host machine does take it into account, and the newly added port is forwarded. However, this is not an option on this server, so how should one do this without restarting the whole host? Thanks for any ideas!

    Read the article

  • Outbound HTTP performance tuning recommendations

    - by Richard Gadsden
    I'll detail my exact setup below, but general recommendations for a better web-browsing experience will be useful. A nice checklist of things to try would be great! I have 600 users on a single site with an 8MB leased line. I get a lot of moans about the performance of "the internet" (ie web-browsing). What recommendations do the community have for speeding things up without just throwing more bandwidth at it? I expect I will end up buying some more, but good management tips are always valuable. My setup is this: Cisco PIX (515E) firewall on the edge of the network. It's just doing some basic NAT, and opening up a handful of ports to various bastion hosts (aka DMZ servers). The DMZ is just a switch that the servers are plugged into. ISA 2006 Enterprise array (two servers) connecting DMZ to the internal LAN, with WebSense Web Security filtering HTTP traffic so users can't look at porn or waste bandwidth on YouTube during working hours. I've done a few things - I've just switched my internal DNS over to use root hints, which halved DNS query latency from 500ms to 250ms. Well worth doing. I'm trying to cache more aggressively, but so much more of the internet is AJAXy and doesn't cache very well as compared to five years ago. Plus the 70GB of cache which felt like a lot a few years ago really isn't any more. I'm getting about 45% cache hits by number of requests, but only about 22% by size, ie larger objects are less likely to be cached. Latency seems to be part of the problem. Is that attributable to the bandwidth problem, or are there things I can look at to try to reduce latency even on heavily-loaded bandwidth?

    Read the article

  • Why do AWS spot-instance prices spike above the "on demand" pricing?

    - by Laykes
    Amazon Pricing on Spot Instance Inconsistencies This is something which will be best explained through screenshots of a historical chart of instance pricings. If you look at a lot of the instance prices for spot instances, you will notice regular patterns of spikes. See here: As you can see, the price for this compute medium instance, regularly spikes above the on demand price. A c1.medium instance (on demand), would only cost $0.186 per hour. But for a period of a few weeks, in zone B, the price would regularly spike to $1.20. This is some 6 times the actual on demand price. It's also not isolated. If you look at zone-b again for small instances, there is a similar, spike frequently. Which goes 4x the on demand pricing. Does anyone know why this happens? Here are a few suggestions Someone entered $1.2 instead of $0.12 (I would discount this since it happened 20 times over the space of 3 weeks). Amazon regularly artifically inflate their prices by bidding on their own instances to get the most bang for their buck. (I would discount this since it would be ridiculous and bad business) Some company launched 1000 servers at once, and wants to make sure that they all launch. (I would discount this since they would presumably launch them at a price which would be below the minimum on demand price. Why would you pay above on demand for a single server?). It's a bug in their reporting?

    Read the article

  • Probelms Intstalling Trac using apt-get Ubuntu Jaunty

    - by Ben Waine
    Hi, I'm having some issues getting apt to install trac correctly on my Ubuntu Jaunty Box. Using the command 'apt-get install trac' I get the following output: root@myserver:~# apt-get install trac Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: trac: Depends: python-setuptools (> 0.5) but it is not installable Depends: python-pysqlite2 (>= 2.3.2) but it is not going to be installed Depends: python-subversion but it is not installable Depends: libjs-jquery but it is not installable Recommends: python-pygments (= 0.6) but it is not installable or enscript but it is not installable Recommends: python-tz but it is not installable E: Broken packages I have successfully used the command on my karmic kola desktop machine and am able to create new projects etc. I thought I might be able to solve the problem by installing all python related extensions. This produced a very similar output. I have Main, universe and multi-verse repositories enabled. Its a remote machine and I have no access to the gui. Hope someone can help, googleing failed to solve the issue or find a solution! Thanks, Ben

    Read the article

  • big speed difference on a network link with and without VPN tunnel

    - by xirtyllo
    Scenario: We have a network link between two offices. The link is provided by a third party company through a VLAN on their network, but to us it is totally transparent -as if we had a simple ethernet cable going from one location to the other-. We have one router at each side of the link, with 3 VPN tunnels in between the two. The test: When I test the speed of the network link with the routers in place, with one laptop directly connected to the router on each side, I consistently get ~30/35Mbps. But if I take out the routers and I test the link connecting the laptops directly to the ethernet cable at each side, I consistently get ~85/88Mbps. It's quite a big performance hit, and I would tend to think that the VPN tunnels are responsible for the slow down. Is it normal that this configuration (two routers with three VPN tunnels between them) takes away so much bandwidth? More info: The encryption algorithm used for the VPN tunnels is AES128. The routers model is Zyxel USG200 and Zyxel USG1000, and their CPU, memory, and storage use is well within normal limits. The nominal bandwidth of the network link is 100Mbps. The network link in question is supplied by a third party company (the building in between our two offices). Basically it passes through their network as a VLAN, but the VLAN is completely transparent to us (e.g. no configuration required on our side, just like one single cable from end to end). Unfortunately (or maybe fortunately) I cannot directly test different routers configurations as I'm not the person in charge of it.

    Read the article

  • VMware databursts to vCenter

    - by Erwin Blonk
    [edit Nov.16th 2009: Thank you for the responses. I'm no longer on this project so the problem is out of my hands. Be sure I will return with other problems :-) ] I have a strange occurence of regular databursts over my WAN links from 2 sites to a site with vCenter. What happens is that a vCenter server is managing local ESX 3.5 servers and 2 from 2 sites across a WAN link. Each server sends an approximately 3MB worth of TLS data (less than 10% of the time it varies to higher or lower) every 15 minutes (with a margin of 2 minutes). So far, I've not been able to single out a process that causes it. I looked through all applications on each site. So far, it seems to originate from one server on each site. Although it may be coincidence and therefore not relevant, I found that one server, with very few exceptions, does a burst at 00:00 on the hour. The other 3 during the hour are a bit off the 15 minute mark but back at the top of the hour, you can sync your watch on it. The other server follows 5 minutes after that with no such precision. But, as said, it never differs more than 2 minutes. Servers are ESX 3.5, vCenter is 2.5.

    Read the article

  • Latency between IIS and SQL on same physical, two VMs

    - by Jerad Rose
    I have a single server (2x4 core CPUs, 32GB ram), that is a Windows Server 2012 Hyper V host, and it hosts two guest VMs (also Windows Server 2012 instances). One of them is a web server, the other is a SQL server. When hitting a page that loops over 50 records, there is noticeable latency. I capture/report the timings of each iteration on the loop, and each iteration is about 20-30 milliseconds. Of course, this amounts to over a second of latency for the whole loop. I thought maybe SQL needed to be tuned, but running profiler on it, the queries are showing almost 0 duration, so it seems the bottleneck is in transit between the two VMs. I have both VMs configured to use the actual NIC (vs. using a VNIC), so maybe that's part of my problem. Also, this is a classic ASP site, so it's using the SQL OLE DB provider, and I'm wondering if that is part of the problem. This is a new server setup, from an existing Windows 2003/IIS6 server setup where both web and DB run on the same server instance (no virtualization). On that setup, there is no such latency when looping over the cursor like this. But there are so many variables, I'm not sure where to start ruling things out.

    Read the article

  • Redhat 5.5: Multi-thread process only uses 1 CPU of the available 8

    - by Tonny
    Weird situation: Redhat Enterprise 5.5 (stock install, no updates, x64) on a HP z800 workstation. (Dual Xeon 2,2 Ghz. 8 cores, 16 if you count Hyper-threading. RH sees 16 cores.) We have an application that can utilize 1, 2 or 4 threads for heavy calculations. Somehow all these threads run on the same core at 100% load (the other 15 cores are nearly idle) so there is absolutely no benefit from the extra threads. In fact there is a slight slowdown as the threads get in each others way on the single core. How do I get them to run on separate cores (if possible)? Application is 64 bit. Can't change anything about the software except changing the threads setting. Is there some obscure Linux setting I can try to change? (I'm a True64 and Aix guy. I use Linux, but have no in depth knowledge of the process scheduling on Linux.)

    Read the article

  • Auto load balancing two node Cluster Hyper-v 2008 R2 enterprise?

    - by Kristofer O
    My setup is a 2 node cluster with 72GB ram each and a ~10TB MD3000i Iscsi SAN. I have about 30VMs running I keep about 15 on either server. I do a live migration to the other server if I need to run updates or whatever... Either one of the servers is able of running all VM if needed, but the cpu is pretty high. Here's my issues. I know Hyper-v has a limit of a single Live-migration at a time. But Why doesn't it queue them up to move one at a time? If I multi select I don't get the option to live migrate a one at a time. OR if I'm in the process of Migrating one it will give me an error that it's currently migrating a VM... Is there a button I missed that will tell a Node that it needs to migrate all the VMs elsewhere? Another question, does anyone know whats the best way to load balance VMs based on CPU and/or network utilzation. I have some VMs that don't do much. and some that trash the CPU or network. I'd like to balance it out on both servers if at all possible. and Is there any way to automate it? last question... If I overcommit my Cluster is there a way to tell the cluster that I want certian VMs the be running and to savestate other VMs based on availible system resources? Say when my one node blue screens and the other node begins starting the VMs up. I want the unimportant ones to shutdown or savestate so the important ones can stay running or come back online. Thanks just for reading all that. Any help would be great.

    Read the article

  • SQL Server instance shuts down

    - by user42119
    I'm currently developing a new ASP.NET project hosted on a Windows Server 2008 RC2 with an SQL Server 2008 Express database. I have three SQL Server instances (for different purposes) running which currently all contain a single database. For apparently no reason, these instances tend to shut down after some days. There might be low or no traffic to these instances, because there might be some days in a row, where I can't develop. It now occurred several times, that one or two of these three instances just shut down, so that I can't access the database, without manually starting the instance. I can't seem to find a event log entry for the shutdown, which is most likely because I just enabled logging (why is the default setting off?). So the questions are: * Why does an SQL Server instance shut down? (Is there such a thing as a "Shut down instance after 3 days of inactivity"? * How can I achieve that the instances are running 24/7? Edit: I solved this problem by writing my own application that checks for the status of the SQL Server services. My program will start via a batch file, that gets called by the Windows Task Scheduler every 5 minutes.

    Read the article

  • How do I fix this Windows 7 wireless connectivity issue?

    - by Charles Randall
    I have a laptop with an Intel Wireless Centrino 6300 module. Recently, the machine has stopped properly connecting to my wireless router. It will get stuck in a loop of connecting, then disconnecting and reconnecting. While connected, it will simply say "No Internet Access." Running inSSIDer 2.0, it shows my network jumping around between two channels -- I know this isn't the case, because I've set my router to sit on one single channel. My MacBook Pro, Boxee Box, PS3, and Xbox 360 all connect fine to the wireless and have no problems at all. I know it's not the wireless module, as I bought a second one recently assuming the first had died -- but I get the same behavior with both. Sometimes, I can fix the issue temporarily by deleting the network (Using the Manage Wireless Networks page), and then re-adding it (via standard wireless methods). Then it will work for a few days. But inevitably the problem comes back, and now the laptop simply won't connect to the wireless at all, even if I take steps that usually work. Since I've ruled out the hardware, and it's unlikely some kind of interference issue (because I would expect to see it on any multitude of other devices), I would think at this point that it's a problem with Windows itself. One thing that might be a hint, even though I delete the network, when I add it again, it's always listed as "Wireless Network Connection 2" even though there isn't another in the list.

    Read the article

  • GRUB doesn't recognize partitions on one harddisk

    - by knizz
    I have a dualboot computer with Windows Vista (on hd0) and Ubuntu 9.10. The bootloader is GRUB and the windows bootloader lets me decide between Vista and Ubuntu-Installation (broken WuBi). But now (i don't know why that changed) I can't use start the windows-bootloader anymore. I tried "ls" on the grub-prompt and it gave me a list like: (hd0) (hd1) (hd1,0) (hd1,1) (hd1,2) ... (fd0) It recognizes all partitions of hd1 (the ubuntu-harddisk) but not of hd0(the win-disk). .. WHY? Here is the result of the "boot info script" for the technical details: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=a7c510e3-2399-437b-ab92-fa609e48d63f)/boot/grub. => No boot loader is installed in the MBR of /dev/sdb sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows Vista Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe /wubildr.mbr /wubildr sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb1: _________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unbekannter Dateisystemtyp „“ sdb2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb3: _________________________________________________________________________ File system: Bios Boot Partition Boot sector type: - Boot sector info: sdb4: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 9.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb5: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Platte /dev/sda: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x52554d66 Partition Boot Start End Size Id System /dev/sda1 * 2,048 307,202,047 307,200,000 7 HPFS/NTFS /dev/sda2 307,202,048 1,250,258,943 943,056,896 7 HPFS/NTFS Drive: sdb ___________________ _____________________________________________________ Platte /dev/sdb: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x00000000 Partition Boot Start End Size Id System /dev/sdb1 1 1,250,263,727 1,250,263,727 ee GPT GUID Partition Table detected. Partition Start End Size System /dev/sdb1 34 262,177 262,144 Microsoft Windows /dev/sdb2 262,178 1,131,253,933 1,130,991,756 Linux or Data /dev/sdb3 1,131,253,934 1,131,255,887 1,954 Bios Boot Partition /dev/sdb4 1,131,255,888 1,245,312,528 114,056,641 Linux or Data /dev/sdb5 1,245,312,529 1,250,263,694 4,951,166 Linux Swap blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 AE1440441440122F ntfs /dev/sda2 3AE66E4DE66E0A09 ntfs data /dev/sdb2 5419D16119DAA4DE ntfs LaufwerkD /dev/sdb4 a7c510e3-2399-437b-ab92-fa609e48d63f ext4 /dev/sdb5 60a0143a-e01b-450a-bbd1-f22059e47b65 swap ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdb4 / ext4 (rw,errors=remount-ro) =========================== sdb4/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s /boot/grub/grubenv ]; then have_grubenv=true load_env fi set default="0" if [ ${prev_saved_entry} ]; then saved_entry=${prev_saved_entry} save_env saved_entry prev_saved_entry= save_env prev_saved_entry fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/white ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry "Ubuntu, Linux 2.6.31-20-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-20-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-14-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-14-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows Vista (loader) (on /dev/sda1)" { insmod ntfs set root=(hd0,1) search --no-floppy --fs-uuid --set ae1440441440122f chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### =============================== sdb4/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 # / was on /dev/sdb4 during installation UUID=a7c510e3-2399-437b-ab92-fa609e48d63f / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb5 during installation UUID=60a0143a-e01b-450a-bbd1-f22059e47b65 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 =================== sdb4: Location of files loaded by Grub: =================== 583.8GB: boot/grub/core.img 583.8GB: boot/grub/grub.cfg 579.7GB: boot/initrd.img-2.6.31-14-generic 580.0GB: boot/initrd.img-2.6.31-20-generic 579.7GB: boot/vmlinuz-2.6.31-14-generic 579.8GB: boot/vmlinuz-2.6.31-20-generic 580.0GB: initrd.img 579.7GB: initrd.img.old 579.8GB: vmlinuz 579.7GB: vmlinuz.old =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on sdb1 00000000 54 34 dc 3b 8b ff 6c fa 3e 59 3d 24 25 af 5f 9b |T4.;..l.>Y=$%._.| 00000010 72 f8 36 3d 56 30 22 fd c6 08 5e 39 7f dc 29 48 |r.6=V0"...^9..)H| 00000020 48 e5 24 52 77 b0 fc 64 b6 ce 48 c3 07 ce b5 81 |H.$Rw..d..H.....| 00000030 06 68 60 4f 6e fb 83 92 df 3a 54 b9 df 21 2a cd |.h`On....:T..!*.| 00000040 1e 2f e2 49 fe cf 81 2d 52 17 1a 4e 66 b4 f3 f0 |./.I...-R..Nf...| 00000050 41 25 e3 96 26 28 fe 19 61 72 75 f8 40 a3 b7 ef |A%..&(..aru.@...| 00000060 5f 79 dc cb 28 44 44 7c 9b 9a 7b 6c 4b 4b 60 0f |_y..(DD|..{lKK`.| 00000070 a9 97 87 bc 85 9f db bb d2 1a 88 9f aa 49 18 d5 |.............I..| 00000080 92 2d db 7e fe f7 8d 7a 18 c0 33 c5 bd 7a 46 07 |.-.~...z..3..zF.| 00000090 c8 27 13 66 94 49 62 9f bc 99 56 55 25 fb 94 a9 |.'.f.Ib...VU%...| 000000a0 3f b2 a7 0a 87 d0 a4 4e 51 f1 09 02 c4 29 eb ff |?......NQ....)..| 000000b0 26 3b 51 3e 5a 0c db ee a6 57 a7 c3 ba a1 74 90 |&;Q>Z....W....t.| 000000c0 ee 70 08 18 cc b8 d0 22 ce 96 c7 cb 68 40 98 20 |.p....."....h@. | 000000d0 49 3d 07 ec df d1 8d cf 19 bc 42 90 70 24 01 b4 |I=........B.p$..| 000000e0 28 cf c6 50 d3 95 5a 1b 18 15 33 c7 b2 a8 95 92 |(..P..Z...3.....| 000000f0 bb 93 fe 18 2b 81 c1 6b 9c 30 f1 65 50 6a 80 3d |....+..k.0.ePj.=| 00000100 74 37 a8 59 a6 51 8a 63 b6 d8 16 9f a9 47 2a 7c |t7.Y.Q.c.....G*|| 00000110 04 a7 fe 69 47 02 bf e9 b7 1b 7a ea 60 5c 3c 53 |...iG.....z.`\<S| 00000120 5b 10 78 dc 4d d2 a8 22 30 45 37 fb 56 06 9f 06 |[.x.M.."0E7.V...| 00000130 aa df cf 87 3a 3e cf 72 f2 e5 a6 c6 aa e2 7c 1c |....:>.r......|.| 00000140 64 c2 fc 80 ce 02 fc 7f 0f c6 60 81 bf cd 3b 5a |d.........`...;Z| 00000150 37 a5 38 1b 0c 1b 39 2e d6 f6 3d a2 36 e5 87 c3 |7.8...9...=.6...| 00000160 17 b5 fd ee 33 c7 ce a3 d9 c2 57 dc ee 85 48 9d |....3.....W...H.| 00000170 33 60 02 cd c5 83 44 44 ea b6 07 25 0a 4b a6 6e |3`....DD...%.K.n| 00000180 fc 51 42 cd 84 0b 65 b6 19 a1 e5 b2 eb 14 0c fa |.QB...e.........| 00000190 24 77 f5 44 6e 5d 39 dd b6 8e cc f8 30 fe 21 46 |$w.Dn]9.....0.!F| 000001a0 9c ff 95 c6 c7 b5 0a df 54 ca d2 ac bc 64 d0 97 |........T....d..| 000001b0 94 54 d9 29 0f 91 60 20 c3 e4 53 c2 b0 e4 40 72 |.T.)..` ..S...@r| 000001c0 7e 25 bc 81 06 ad 05 46 14 a7 e6 71 6b 5c db 9c |~%.....F...qk\..| 000001d0 0a 5e 76 23 ae 06 01 36 98 21 65 2c 90 e7 4b 1a |.^v#...6.!e,..K.| 000001e0 2a 2d 80 a5 48 db 9e 14 e0 9f e9 aa 00 e3 77 32 |*-..H.........w2| 000001f0 0f fd 94 db 55 a6 64 46 be ae ca de da ee 89 68 |....U.dF.......h| 00000200 =======Devices which don't seem to have a corresponding hard drive============== sdc sdd sde

    Read the article

  • IIS 7.5 Siteminder Does not protect ASP.net MVC requests

    - by HariM
    We are trying to use ASP.Net MVC with Siteminder for Single Sign on. This is on Windows Server 2008 R2 with IIS 7.5. Siteminder Agent version 6QMR6. Problem : Siteminder protects physical files that are exist. And it is not protecting the folder when we try to access a non existed file. It must redirect to login page even if the file doesn't exist when the user is accessing a protected folder. How to configure in IIS 7.5 that Do not verify a file exist, before authentication by siteminder. SiteMinderWebAgent is a Handler(WildCard Script Map) we created using the ISAPI6WebAgent.dll How to Protect ASP.Net MVC Request with Siteminder? (Added this as My previous question did not solve the problem). MVC Request shows up in IIS Log but not in Siteminder log. Update : Microsoft Support says currently IIS7.5, even in earlier versions doesnt support wildcard mappings on any two Isapi Handlers with * wild card. Currently in my case Siteminder has * wildcard and asp.net mvc (handler is aspnet_isapi) has * wildcard to handle the reqeusts. Ordered priority doesnt work in the wild card mappings case with Just *. Did not convinced with the answer but will wait till tomorrow for them to get back.

    Read the article

  • How do I Setup Multiple Sites in HostGator Shared Hosting?

    - by cillosis
    I recently decided to consolidate all of my random projects into a single hosting account as it was starting to get very expensive to run each on an individual hosting plan. I purchased the HostGator Baby plan which allows hosting of multiple domains. You have to set it up with a root domain name which is fine (I used my portfolio domain name). As far as file structure, I wanted a folder for each site in /public_html so the structure looks like this: - public_html/ - myportfolio.com/ - ... my files ... - anothersite.com/ - ... my files ... - thirdsite.com/ - ... my files ... I setup add-on domains and pointed them to their respective folders which works fine. My problem is the root domain ex. myportfolio.com expects it's files to be contained at the root of /public_html rather than within it's folder I created. I setup a redirect to point requests for myportfolio.com to myportfolio.com/myportfolio.com/ which works initially except (at least in my WordPress installation) it still references it's root folder as public_html. TL;DR; What is the best way to go about setting up multiple site hosting in a shared hosting environment (i.e. I can't setup vhosts). Does anybody know of any tutorials or videos that walk through this more clearly? Thanks.

    Read the article

  • How powerful of a PC do you need to edit HD videos?

    - by Xeoncross
    I have a Core2Quad Q8200 (2.3GHz) with 4GB of RAM, a 512MB PCIe video card, and a SATA-2 HD. Yet it still isn't fast enough to edit 720i/p video in Sony Vegas or Adobe Premiere/Aftereffects. My RAM usage never peaks over 1.6GB, but my CPU cores make it to 95% quick! Right now the preview panes in all these programs lag to bad to actually work on the videos. I get to see 1-3 frames every second or two! So how fast do I have to go? At what point will my CPU be fast enough to actually edit these videos? I have to assume that regular people and their regular sub $2k computers can actually work with this footage. Another way to answer this is, how fast is the PC you used to edit videos? Update: I'ts worth noting that now that I have Adobe Pre/AF CS4 I am more interested in getting that working than my older Vegas 6. If you didn't have to re-run RAM preview every, single, time you made one change it would be my answer. But since I like to test many filters and effects before choosing one - I have to re-render a 1-sec section of footage over-and-over and it drives me nuts waiting. Perhaps a motherboard with Dual Xeon chips or something would be able to handle this. It would probably be as much as a dual-crossfire setup and would also speed up other applications.

    Read the article

  • Poor NFS Performance: OpenFiler

    - by Safin09
    Good Day Everyone, I have an issue with OpenFiler, a Linux-based operating that converts a computer system into a SAN/NAS appliance. Here is the problem. In my environment we have two Netapp Storevault 500 appliances that I normally perform backups to a NFS share. There are two backup cronjobs that use ghettoVCB to backup two groups of VM's. One group is a pool of 3 VMs. This takes 13 mins to complete. A second job that backups a pool of 5 VMs to a 2nd Storevault appliance which takes 2 hours. We then installed Openfiler on a old server that has 2 core Xeon processors. There is a software RAID 5 process in place. When performing the same backups to a NFS Openfiler share, the first backup job, which takes 13 mins, takes around 4 hours. The second backup job, which takes 2 hours, takes almost 10 hours to complete. This is unacceptable!!!! Especially considering the strain placed on the host ESX Server. I assumed that because of the software RAID 5, the overhead on the CPU explained the long backup times. I then installed Openfiler on a 2nd server, an IBM x306 machine which has a P4 Intel processor. This time no software RAID or any RAID at all. A single 750GB hard drive that contained the OS and the rest of the disk uses to backup VMs to a NFS share. I performed the first backup job of the pool of 3 VMs. This time the backup job took 1 and 1/2 hours to complete instead of 13 mins!!!!!!!!!! Is Openfiler simply poor at being an NFS Server!!!!!!!!!!!!! Has anyone else had these issues with Openfiler?

    Read the article

  • Setting a time limit for a transaction in MySQL/InnoDB

    - by Trevor Burnham
    This sprang from this related question, where I wanted to know how to force two transactions to occur sequentially in a trivial case (where both are operating on only a single row). I got an answer—use SELECT ... FOR UPDATE as the first line of both transactions—but this leads to a problem: If the first transaction is never committed or rolled back, then the second transaction will be blocked indefinitely. The innodb_lock_wait_timeout variable sets the number of seconds after which the client trying to make the second transaction would be told "Sorry, try again"... but as far as I can tell, they'd be trying again until the next server reboot. So: Surely there must be a way to force a ROLLBACK if a transaction is taking forever? Must I resort to using a daemon to kill such transactions, and if so, what would such a daemon look like? If a connection is killed by wait_timeout or interactive_timeout mid-transaction, is the transaction rolled back? Is there a way to test this from the console? Clarification: innodb_lock_wait_timeout sets the number of seconds that a transaction will wait for a lock to be released before giving up; what I want is a way of forcing a lock to be released. Update: Here's a simple example that demonstrates why innodb_lock_wait_timeout is not sufficient to ensure that the second transaction is not blocked by the first: START TRANSACTION; SELECT SLEEP(55); COMMIT; With the default setting of innodb_lock_wait_timeout = 50, this transaction completes without errors after 55 seconds. And if you add an UPDATE before the SLEEP line, then initiate a second transaction from another client that tries to SELECT ... FOR UPDATE the same row, it's the second transaction that times out, not the one that fell asleep. What I'm looking for is a way to force an end to this transaction's restful slumber.

    Read the article

  • Online Storage and security concerns

    - by Megge
    I plan to set up a small fileserver. I already own a small server at HostEurope (VirtualServer L, 250GB space), but they don't offer enough space (there is the HostEurope Cloud, but paying for bandwidth isn't an option here, video-streaming should be possible) Requirements summarized: Storage: 2TB, Users: ~15, Filesizes: < 100GB, should be easily reachable (Mount as a networkdrive or at least have solid "communication" software) My first question would be: Where can I get halfway affordable online storages? And how should I connect them to my server? Getting an additional server is a bit overkill, as I know no hoster which allows 2 TB on a small 2 Ghz Dual Core 2 GB RAM thingy (that would be enough by far, I just need much space), and connecting it via NFS or FTP over Internet seems a bit strange and cripples performance. Do you have any advice where I could get that storage service from? (I sent HostEurope a custom request today, but they didn't answer till now. If they can provide me with that space, this question will be irrelevant, but the 2nd one is the more important one anway, don't do much more than recommend me some based on experience, you don't have to crawl hours through hosting services) livedrive for example offers 5 TB for 17€ / month, I'd be happy with 2 TB for 20 €, the caveat is: It doesn't allow multiple users, which leads me to my second question: Where are the security problems? Which protocol is sufficient (I want private and "public" folders etc. the usual "every user has its own and a public space"-thing), secure and fast? (I'd tend to (S)FTP, problem with FTP is: Most of those hosting services don't even allow FTP with mutliple users and single users lead me into "hacking" a solution (you could map the basic folder structure on the main server and just mount every subfolder from the storage, things get difficult with a public folder with 644 permissions though) Is useing something like PKI or 802.1X overkill for private uses?

    Read the article

  • Can't make virtual host working

    - by sica07
    I have to create a virtual host on a server which, previously hosted a single website (domain name). Now I'm trying to add a second domain on this server (using the same nameserver). What I've done so far: Initially there was no virtual host so I've made one for the second domain: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /var/www/bla ServerName www.blabla.com ServerAlias blabla.com <Directory /var/www/blabla> Order deny,allow Allow from all AllowOverride All </Directory> </VirtualHost *:80> Because nothing happend, I changed the DocumentRoot of the apache server to /var/www (initially was the root document of the first website -/var/www/html) and created a virtual host for the first domain too: <VirtualHost *:80> DocumentRoot /var/www/html ServerName www.first.com ServerAlias first.com <Directory /var/www/html> Order deny,allow Allow from all AllowOverride All </Directory> </VirtualHost *:80> In this case, first.com is working ok, but bla.com not. When I ping blabla.com I get the "unkown host" response. What am I doing wrong? Do I have to modify something in the DNS settings too? Thank you.

    Read the article

  • NVidia ION and /dev/mapper/nvidia_... issues.

    - by Ritsaert Hornstra
    I have an NVidia ION board with 4 SATA ports and want to use that to run a Linux Server (CentOS 5.4). I first hooed up 3 HDs (that will be a RAID5 array) and a forth small boot HD. I first started to use the onboard RAID capability but that does not work correctly under Linux: the raid capacity is not a real RAID but uses lvm to define some arays. After setting the BIOS back to normal SATA mode and whiping the HDs, the first boot harddisk (/dev/sda) is seen as /dev/sda BEFORE mounting and after mounting as /dev/mapper/nvidia_. CentOS is unable to install on it (and grub is not installable on it either). So somehow the harddisk is still seen as if it belongs to some lvm volume. I tried to clean out the HD by issuing a few dd if=/dev/zero of=/dev/sda commands to wipe the starting cylinders and final cylinders but to no avail. Did anyone see this problem and did anyone find a solution? UPDATE When I create only a single ext3 partition on the first HD (/dev/mapper/nvidia_...) no LVM partitions are seen and I can boot from /dev/mapper/nvidia_.... Now the next step is to see how I can get rid of this folly.

    Read the article

  • Digital Asset Management, iPhoto / Aperture server... alternative

    - by Sisyphus
    Afternoon, Clients, 10 : All Apples running either Leopard or Snow Leopard Server : Snow Leopard server, (and I have a old Dell Poweredge 650 at home running Gentoo 2.6, if anybody as a Linux solution). The situation: I work in small design company with 8 people, at present we are looking to consolidate all our image files onto one location, at present we each use our preferred single user DAM solution, be it, Adobe Bridge, iPhoto/Aperture (some don't bother at all) The filetypes commonly used are .psd, .pdf, .eps, .tiff, .jpg and RAW image files. Ideally what is needed: Centralised on one server, but allows us to search via spotlight (not essential, but would be nice) Include searchable metadata information such as date, location, title Open-source or as low cost as possibly Allow simultaneous users to import files So far, I have looked at a few open source DAM, systems, such as Razuna, Gallery (not strictly DAM), ResourceSpace, Notre-DAM, while these are brilliant and open-source, they don't integrate as smoothly with the Desktop as iPhoto and aperture. For iPhoto and aperture, I have tried creating a Shared library on the server (a tad laggy), and also using a drive with no permissions, put a library and letting each client read from it, however if they want to put images onto the library only, it's only supports one user at a time writing to the library... Any ideas what could fulfill our needs? Or is it time to bite the bullet for FinalCut Server? Thanks in advance.

    Read the article

  • PXE booting LACP hosts on Force10 S50N with FTOS

    - by lolwutreddit
    Hardware: S50N Firmware: FTOS 8.4.2.6 Problem: We're trying to PXE boot some servers that are connected via port-channel interfaces with LACP. Current Work-around: we PXE boot a server with a single interface (eth0), and then use a Perl script to turn up the port-channel interfaces after the server is built. Details: Is anyone doing anything similar on Force10 S50 switches with FTOS? If not, is anyone doing this on another S series, or larger chassis-based Force10? I'm wondering if Native VLAN will solve this, since ports in a port-channel cannot explicitly have a VLAN set, and they don't seem to use the tagged or untagged VLAN that the port channel is in. I will confirm this next (I think it's the only thing I haven't tried) Juniper Example: http://broken.net/openindiana/how-to-pxe-boot-systems-on-lacp-using-juniper-switches/ Cisco: there are plenty of documented ways to solve this issue on IOS and Nexus Update/Edit: since there seems to be no way to use interface or port-channel mode commands to get the individual interfaces to show up in spanning-tree (rtsp in this case), the ports should never go into a forwarding state. I'm not going to mess with it anymore unless a) someone that has experience passes it on, or b) Force10 comes up with a solution for this (I'm guessing it will only be introduced on other S platforms (S55, S60), since the S50 seems to be near EOL). I'm basing that on the fact that the Open Automation type features are only being supported on the newer switches.

    Read the article

  • Public DNS redirect subdomain to Windows Server 2003 DNS

    - by user125248
    I'm a programmer by trade but often dabble in sysadmin tasks and responsibilities. I have recently been tasked with setting up a Windows Server 2003 networking environment for a small business with multiple branches. The business already has a domain name they use to host a website at www.example.com. Currently the DNS nameservers are at Zerigo and I would very much like it to remain that way (as they specialize in just providing DNS services and they do this very well). We also have a bunch of other subdomains we use to conviniently connect to the various branches that have static IPs assigned from ISPs, so we're able to connect easily to branch1.example.com. Is it possible to 'redirect' all intranet.example.com DNS requests to a Windows box? I've been doing a little reading and I see there are NS records that might be able to do this, and the Windows DNS server could then perform all of the lookups for that subdomain, say, server1.intranet.example.com or client5.intranet.example.com. This would seem better to me, than registering a new domain name for the organisation, as keeping a single domain name makes more organizational sense.

    Read the article

< Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >