Search Results

Search found 14910 results on 597 pages for 'programs and features'.

Page 491/597 | < Previous Page | 487 488 489 490 491 492 493 494 495 496 497 498  | Next Page >

• Combine the Address & Search Bars in Firefox

  - by Asian Angel

  The Search Bar in Firefox is very useful for finding additional information or images while browsing but the UI space it takes up can be frustrating at times. Now you can reclaim that UI space and still have access to all that searching goodness with the Foobar extension. Note: This is about the Foobar Firefox extension and not to be confused with Foobar2000 the open source music player. Before If you have the “Search Bar” displayed there is no doubt that it is taking up valuable space in your browser’s UI. What you need is the ability to reclaim that UI space and still have the same access to your search capability as before…no more sacrificing one for a gain with the other. After As soon as you have installed the extension you can see that the top part of your browser will look much sleeker without the “Search Bar” to clutter it up. The “Search Engine Icon” will now be visible inside of your “Address Bar” as seen here. You will be able to access the same “Search Engine Menu” as before by clicking on the “Search Engine Icon”. There are two display modes for search results (setting available in the “Options”). The first one shown here is “Simple Mode” where all results are in a condensed format. Notice that not only are there search suggestions but also “Bookmarks & History” listings as well. You can literally get the best of both when conducting a search. Note: The number of entries for search suggestions and bookmark/history listings can be adjusted higher or lower in the “Options”. The second one is “Rich Mode” where the results are shown with more details. Choose the “mode” that best suits your personal style. For our first example you can see the results when we conducted a quick search on “Windows 7” (using the first of the three offerings shown from Bing). Our second example was a search for “Flowers” using our Photobucket search engine. Once again nice results opened in a new tab for us. Options The options are easy to go through. It is really nice to be able to choose the number of results that you want displayed and the format that you want them shown in. Note: Changing the “Suggestion popup style” will require a browser restart to take effect. Conclusion If you love using the “Search Bar” in Firefox but want to reclaim the UI space then you will definitely want to add this extension to your browser. The ability to customize the number of results and choose the formatting make this extension even better. Links Download the Foobar extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Combine the Address Bar and Progress Bar Together in FirefoxHide Some or All of the GUI Bars in FirefoxEnable Partial Match AutoComplete in the Firefox Address BarQuick Firefox UI TweaksAdd Search Forms to the Firefox Search Bar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor Add Multiple Tabs to Office Programs The Wearing of the Green – St. Patrick’s Day Theme (Firefox) Perform a Background Check on Yourself

  Read the article

• Back-sliding into Unmanaged Code

  - by Laila

  It is difficult to write about Microsoft's ambivalence to .NET without mentioning clichés about dog food.  In case you've been away a long time, you'll remember that Microsoft surprised everyone with the speed and energy with which it introduced and evangelised the .NET Framework for managed code. There was good reason for this. Once it became obvious to all that it had sleepwalked into third place as a provider of development languages, behind Borland and Sun, it reacted quickly to attract the best talent in the industry to produce a windows version of the Java runtime, with Bounds-checking, Automatic Garbage collection, structures exception handling and common data types. To develop applications for this managed runtime, it produced several excellent languages, and more are being provided. The only thing Microsoft ever got wrong was to give it a stupid name. The logical step for Microsoft would be to base the entire operating system on the .NET framework, and to re-engineer its own applications. In 2002, Bill Gates, then Microsoft Chairman and Chief Software Architect said about their plans for .NET, "This is a long-term approach. These things don't happen overnight." Now, eight years later, we're still waiting for signs of the 'long-term approach'. Microsoft's vision of an entirely managed operating system has subsided since the Vista fiasco, but stays alive yet dormant as Midori, still being developed by Microsoft Research. This is an Internet-centric fork of the singularity operating system, a research project started in 2003 to build a highly-dependable operating system in which the kernel, device drivers, and applications are all written in managed code. Midori is predicated on the prevalence of connected systems, with provisions for distributed concurrency where application components exist 'in the cloud', and supports a programming model that can tolerate cancellation, intermittent connectivity and latency. It features an entirely new security model that sandboxes applications for increased security. So have Microsoft converted its existing applications to the .NET framework? It seems not. What Windows applications can run on Mono? Very few, it seems. We all thought that .NET spelt the end of DLL Hell and the need for COM interop, but it looks as if Bill Gates' idea of 'not overnight' might stretch to a decade or more. The Operating System has shown only minimal signs of migrating to .NET. Even where the use of .NET has come to dominate, when used for server applications with IIS, IIS itself is still entirely developed in unmanaged code. This is an irritation to Microsoft's greatest supporters who committed themselves fully to the NET framework, only to find parts of the Ambivalent Microsoft Empire quietly backsliding into unmanaged code and the awful C++. It is a strategic mistake that the invigorated Apple didn't make with the Mac OS X Architecture. Cheers, Laila

  Read the article

• Do we still have a case against the goto statement? [closed]

  - by FredOverflow

  Possible Duplicate: Is it ever worthwhile using goto? In a recent article, Andrew Koenig writes: When asked why goto statements are harmful, most programmers will say something like "because they make programs hard to understand." Press harder, and you may well hear something like "I don't really know, but that's what I was taught." For that reason, I'd like to summarize Dijkstra's arguments. He then shows two program fragments, one without a goto and and one with a goto: if (n < 0) n = 0; Assuming that n is a variable of a built-in numeric type, we know that after this code, n is nonnegative. Suppose we rewrite this fragment: if (n >= 0) goto nonneg; n = 0; nonneg: ; In theory, this rewrite should have the same effect as the original. However, rewriting has changed something important: It has opened the possibility of transferring control to nonneg from anywhere else in the program. I emphasized the part that I don't agree with. Modern languages like C++ do not allow goto to transfer control arbitrarily. Here are two examples: You cannot jump to a label that is defined in a different function. You cannot jump over a variable initialization. Now consider composing your code of tiny functions that adhere to the single responsibility principle: int clamp_to_zero(int n) { if (n >= 0) goto n_is_not_negative: n = 0; n_is_not_negative: return n; } The classic argument against the goto statement is that control could have transferred from anywhere inside your program to the label n_is_not_negative, but this simply is not (and was never) true in C++. If you try it, you will get a compiler error, because labels are scoped. The rest of the program doesn't even see the name n_is_not_negative, so it's just not possible to jump there. This is a static guarantee! Now, I'm not saying that this version is better then the one without the goto, but to make the latter as expressive as the first one, we would at least have to insert a comment, or even better yet, an assertion: int clamp_to_zero(int n) { if (n < 0) n = 0; // n is not negative at this point assert(n >= 0); return n; } Note that you basically get the assertion for free in the goto version, because the condition n >= 0 is already written in line 1, and n = 0; satisfies the condition trivially. But that's just a random observation. It seems to me that "don't use gotos!" is one of those dogmas like "don't use multiple returns!" that stem from a time where the real problem were functions of hundreds or even thousand of lines of code. So, do we still have a case against the goto statement, other than that it is not particularly useful? I haven't written a goto in at least a decade, but it's not like I was running away in terror whenever I encountered one. 1 Ideally, I would like to see a strong and valid argument against gotos that still holds when you adhere to established programming principles for clean code like the SRP. "You can jump anywhere" is not (and has never been) a valid argument in C++, and somehow I don't like teaching stuff that is not true. 1: Also, I have never been able to resurrect even a single velociraptor, no matter how many gotos I tried :(

  Read the article

• Github Organization Repositories, Issues, Multiple Developers, and Forking - Best Workflow Practices

  - by Jim Rubenstein

  A weird title, yes, but I've got a bit of ground to cover I think. We have an organization account on github with private repositories. We want to use github's native issues/pull-requests features (pull requests are basically exactly what we want as far as code reviews and feature discussions). We found the tool hub by defunkt which has a cool little feature of being able to convert an existing issue to a pull request, and automatically associate your current branch with it. I'm wondering if it is best practice to have each developer in the organization fork the organization's repository to do their feature work/bug fixes/etc. This seems like a pretty solid work flow (as, it's basically what every open source project on github does) but we want to be sure that we can track issues and pull requests from ONE source, the organization's repository. So I have a few questions: Is a fork-per-developer approach appropriate in this case? It seems like it could be a little overkill. I'm not sure that we need a fork for every developer, unless we introduce developers who don't have direct push access and need all their code reviewed. In which case, we would want to institute a policy like that, for those developers only. So, which is better? All developers in a single repository, or a fork for everyone? Does anyone have experience with the hub tool, specifically the pull-request feature? If we do a fork-per-developer (or even for less-privileged devs) will the pull-request feature of hub operate on the pull requests from the upstream master repository (the organization's repository?) or does it have different behavior? EDIT I did some testing with issues, forks, and pull requests and found that. If you create an issue on your organization's repository, then fork the repository from your organization to your own github account, do some changes, merge to your fork's master branch. When you try to run hub -i <issue #> you get an error, User is not authorized to modify the issue. So, apparently that work flow won't work.

  Read the article

• Thinktecture.IdentityServer RC

  - by Your DisplayName here!

  I just uploaded the RC of IdentityServer to Codeplex. This release is feature complete and if I don’t get any bug reports this is also pretty much the final V1. Changes from B1 The configuration data access is now based on EF 4.1 code first. This makes it much easier to use different data stores. For RTM I will also provide a SQL script for SQL Server so you can move the configuration to a separate machine (e.g. for load balancing scenarios). I included the ASP.NET Universal Providers in the download. This adds official support for SQL Azure, SQL Server and SQL Compact for the membership, roles and profile features. Unfortunately the Universal Provider use a different schema than the original ASP.NET providers (that sucks btw!) – so I made them optional. If you want to use them go to web.config and uncomment the new provider. The relying party registration entries now have added fields to add extra data that you want to couple with the RP. One use case could be to give the UI a hint how the login experience should look like per RP. This allows to have a different look and feel for different relying parties. I also included a small helper API that you can use to retrieve the RP record based on the incoming WS-Federation query string. WS-Federation single sign out is now conforming to the spec. Certificate based endpoint identities for SSL endpoints are optional now. Added a initial configuration “wizard”. This sets up the signing certificate, issuer URI and site title on the first run. Installation This is still a “developer” release – that means it ships with source code that you have to build it etc. But from that point it should be a little more straightforward as it used to be: Make sure SSL is configured correctly for IIS Map the WebSite directory to a vdir in IIS Run the web site. This should bring up the initial configuration Make sure the worker process account has access to the signing certificate private key Make sure all your users are in the “IdentityServerUsers” role in your role store. Administrators need the “IdentityServerAdministrators” role That should be it. A proper documentation will be hopefully available soon (any volunteers?). Please provide feedback! thanks!

  Read the article

• Running Multiple Queries in Oracle SQL Developer

  - by thatjeffsmith

  There are two methods for running queries in SQL Developer: Run Statement Run Statement, Shift+Enter, F9, or this button Run Script No grids, just script (SQL*Plus like) ouput is fine, thank you very much! What’s the Difference? There are some obvious differences between the two features, the most obvious being the format of the output delivered. But there are some other, more subtle differences here, primarily around fetching. What is Fetch? After you run send your query to Oracle, it has to do 3 things: Parse Execute Fetch Technically it has to do at least 2 things, and sometimes only 1. But, to get the data back to the user, the fetch must occur. If you have a 10 row query or a 1,000,000 row query, this can mean 1 or many fetches in groups of records. Ok, before I went on the Fetch tangent, I said there were two ways to run statements in SQL Developer: Run Statement Run statement brings your query results to a grid with a single fetch. The user sees 50, 100, 500, etc rows come back, but SQL Developer and the database know that there are more rows waiting to be retrieved. The process on the server that was used to execute the query is still hanging around too. To alleviate this, increase your fetch size to 500. Every query ran will come back with the first 500 rows, and rows will be continued to be fetched in 500 row increments. You’ll then see most of your ad hoc queries complete with a single fetch. Scroll down, or hit Ctrl+End to force a full fetch and get all your rows back. Run Script Run Script runs the contents of the worksheet (or what’s highlighted) as a ‘script.’ What does that mean exactly? Think of this as being equivalent to running this in SQL*Plus: @my_script.sql; Each statement is executed. Also, ALL rows are fetched. So once it’s finished executing, there are no open cursors left around. The more obvious difference here is that the output comes back formatted as plain old text. Run one or more commands plus SQL*Plus commands like SET and SPOOL The Trick: Run Statement Works With Multiple Statements! It says ‘run statement,’ but if you select more than one with your mouse and hit the button – it will run each and throw the results to 1 grid for each statement. If you mouse hover over the Query Result panel tab, SQL Developer will tell you the query used to populate that grid. This will work regardless of what you have this preference set to: DATABASE – WORKSHEET – SHOW QUERY RESULTS IN NEW TABS Mind the fetch though! Close those cursors by bring back all the records or closing the grids when you’re done with them.

  Read the article

• Oracle 'In Touch' PartnerCast - July 1, 2014

  - by Cinzia Mascanzoni

  27 May 2014 'In Touch' Webcast for Oracle EMEA Partners Invitation Stay Connected Oracle Media Network   OPN on PartnerCast   Oracle 'In Touch' PartnerCast (July 1, 2014)Be prepared for a year of growth Register Now! Dear partner, We would like to invite you to join David Callaghan, Senior Vice President Oracle EMEA Alliances and Channels, and his studio guests for the next broadcast of the Oracle ‘In Touch’ PartnerCast on Tuesday 1st July 2014 from 10:30am UK / 11:30am CET. In this cast, David’s studio guests and his regional reporters will be looking at your priorities as EMEA partners and how best to grow with Oracle. We also look forward to the broadcast covering topics on the following: Highlights of FY14 Strategic themes for FY15 HCM, CRM and ERP Oracle on Oracle Exclusive for ‘In Touch’ David Callaghan questions Rich Geraffo, Senior Vice President, Global Alliances & Channels, on how the FY15 partner Global kick off relates to EMEA. Plus David provides your chance to hear from some of the newly appointed Worldwide A&C Leadership team as he discusses with Bruce Chumley VP Oracle Channel Distribution Sales & Troy Richardson VP Oracle Strategic Alliances; their core focus and strategy of growth and what they intend on bringing to the table in their new role. Register Now! With lots of studio guests joining David, why not get in touch on Twitter using the hashtag #OracleInTouch or by emailing [email protected] to get your questions featured in the cast! To find out more information and to watch previous episodes on-demand, please visit our webpage here. Best regards, Oracle EMEA Alliances & Channels Oracle 'In Touch' PartnerCast: be prepared for a year of growth July 01, 2014 10:30am UK / 11:30am CET Duration: 45 mins. Host David Callaghan Senior VP Oracle EMEA Alliances & Channels Studio Guests Alistair Hopkins VP Sales & Strategy, Technology Solutions, Oracle EMEA Alliances & Channels More to be announced shortly Features Contributors Rich Geraffo Senior Vice President, Oracle Worldwide Alliances & Channels Bruce Chumley Vice President Channel Distribution Sales, Oracle WW Alliances & Channels Steve Biondi VP Channel Distribution Sales, Oracle WW Alliances & Channels Regional Reporters Silvia Kaske VP Oracle A&C WCE North Will O'Brien VP Oracle A&C UK/IE Eric Fontaine VP Oracle A&C WCE South Janusz Naklicki VP Oracle A&C ECEMEA

  Read the article

• Beginning with first project on game development [closed]

  - by Tsvetan

  Today is the day I am going to start my first real game project. It will be a Universe simulator. Basically, you can build anything from tiny meteor to quazars and universes. It is going to be my project for an olympiad in IT in my country and I really want to make it perfect(at least a bronze medal). So, I would like to ask some questions about organization and development methodologies. Firstly, my plan is to make a time schedule. In it I would write my plans for the next month or two(because that is the time I have). With this exact plan I hope to make my organisation at its best. Of course, if I am doing sth faster than the schedule I would involve more features for the game and/or continue with the tempo I have. Also, for the organisation I would make a basic pseudocode(maybe) and just rewrite it so it is compilable. Like a basic skeleton of everything. The last is an idea I tought of in the moment, but if it is good I will use it. Secondly, for the development methodologies, obviously, I think of making object-oriented code and make everything perfect(a lot of testing, good code, documentation etc.). Also, I am going to make my own menu system(I read that OpenGL hasn't got very good one). Maybe I would implement it with an xml file, holding the info about position of buttons, text boxes, images and everything. Maybe I would do a specific CSS for it and so on. I think that is very good way of doing the menu system, because it makes the presentation layer separate of the logic. But, if there is a better way, I would do it the better way. For the logic, well, I don't have much to say. OO code, testing, debuging, good and fast algorithms and so on. Also, a good documentation must be written and this is the area I need to make some research in. I think that is for now. I hope I have been enough descriptive. If more questions come on my mind, I will ask them. Edit: I think of blogging every part of the project, or at least writing down everything in a file or something like that. My question is: Is my plan of how to do everything around the project good? And if not, what is necessary to be improved and what other things I can involve for making the project good.

  Read the article

• ArchBeat Link-o-Rama for 2012-07-10

  - by Bob Rhubart

  Free Event Today: Virtual Developer Day: Oracle Fusion Development This free event—another in the ongoing series of OTN Virtual Developer Days—focuses on Oracle Fusion development, and features three session tracks plus hands-on labs. Agenda and session abstracts are available now so you can be ready for the live event when it kicks off today, July 10, 9am to 1pm PST / 12pm to 4pm EST / 1pm to 5pm BRT. Podcast: The Role of the Cloud Architect - Part 1/3 In part one of this three-part conversation, cloud architects Ron Batra (AT&T) and James Baty (Oracle) talk about how cloud computing is driving the supply-chaining of IT and the "democratization of the activity of architecture." Middleware and Cloud Computing Book | Tom Laszewski Cloud migration expert Tom Laszewski describes Middleware and Cloud Computing by Frank Munz as "one of only a couple books that really discuss AWS and Oracle in depth." Cloud computing moves from fad to foundation | David Linthicum "When enterprises make cloud computing work, they view the application of the technology as a trade secret of sorts, so there are no press releases or white papers," says David Linthicum. "Indeed, if you see one presentation around a successful cloud computing case study, you can bet you're not hearing about 100 more." Oracle Real-Time Decisions: Combined Likelihood Models | Lukas Vermeer Lukas Vermeer concludes his extensive series of posts on decision models with a look "an advanced approach to amalgamate models, taking us to a whole new level of predictive modeling and analytical insights; combination models predicting likelihoods using multiple child models." Running Oracle BPM 11g PS5 Worklist Task Flow and Human Task Form on Non-SOA Domain | Andrejus Baranovskis "With a standard setup, both the BPM worklist application and the Human task form run on the same SOA domain, where the BPM process is running," says Oracle ACE Director Andrejus Baranovskis. "While this work fine, this is not what we want in the development, test and production environment." BAM design pointers | Kavitha Srinivasan "When using EMS (Enterprise Message Source) as a BAM feed, the best practice is to use one EMS to write to one Data Object," says Oracle Fusion Middleware A-Team blogger Kavitha Srinivasan. "There is a possibility of collisions and duplicates when multiple EMS write to the same row of a DO at the same time." Changes in SOA Human Task Flow (Run-Time) for Fusion Applications | Jack Desai Oracle Fusion Middleware A-Team blogger Jack Desai shares a troubleshooting tip. Thought for the Day "A program which perfectly meets a lousy specification is a lousy program." — Cem Kaner Source: SoftwareQuotes.com

  Read the article

• Highlights from recent Yammer video

  - by Eric Jensen

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} A few weeks back, Ryan Kennedy of Yammer gave a talk about Berkeley DB Java Edition. You can find it posted here on Alex Popescu's Blog, or go directly to the video post itself. It was full of useful nuggets of information, such as why they chose to use BDB JE, performance, and some tips & tricks at the end. At over 40 minutes, the video is quite long. Ryan is an entertaining speaker, so I suggest you watch all of it. But if you only have time for the highlights, here are some times you can sync to:  06:18 hear the Berkeley DB JE features that caused Yammer select it, including: replication auto leader election, failover configurable durability and consistency guarantees 23:10 System performance characteristics 35:08 Check out the tips and tricks for using Berkeley DB JE I know the Berkeley DB development team is very pleased that BDB JE is working out well for Yammer. We definitely encourage others out there to take note of this success, especially if your requirements are similar to Yammer's (which Ryan outlines at the beginning of his talk)

  Read the article

• Share Folders & Files Between Vista and XP Machines

  - by Mysticgeek

  Since Microsoft has three operating systems in use, chances are you’ll find yourself needing to share files between XP, Vista, Windows 7, or some combination of the three. Here we take a look at sharing between a Vista and XP on your home network. Share Without Password Protected Sharing If you’re not worried about who’s accessing the files and folders, the easiest method is to disable Password Protected Sharing. So on the Vista machine open Network and Sharing Center. Under Sharing and Discovery make sure Network Discovery, File Sharing, and, Public Folder Sharing are turned on. Also turn off Password Protected Sharing… Now go into the Vista Public folder, located in C:\Users\Public, and add what you want to share or create a new folder. In this example we created a new folder called XP_Share and added some files to it. On the XP machine go into My Network Places and under Network Tasks click on View Workgroup Computers. Now you’ll see all of the computers on your network which should be part of the same Workgroup. Here we need to double-click on the Vista computer. And there we go…no password to enter so we can access the XP_Share folder or anything else that is located in the Public folder. Share with Password Protected Sharing If you want to keep Password Protected Sharing turned on, then we need to do things a little different. When it’s turned on and you try to access the Vista machine from XP, you’re prompted for a password, and no matter what you think the credentials are, you can’t get access…very annoying. So what we need to do is add the XP Machine as a user. Right-click on Computer from the Start Menu or desktop icon and select Manage from the context menu. The Computer Management screen opens up and you want to expand Local Users and Groups, then the Users folder. Then right-click any open area an select New User. Now create a new user name and password, you can also fill in the other fields if you want. Then make sure to uncheck User must change password at next logon and check the box next to Password never expires. Click the Create button and close out of the New User screen. You’ll then see the new user we created in the list and you can close out of the Computer Management window. Now back on the XP computer when you double-click on the Vista machine, your prompted to log in. Just type in the username and password you just created. Now you’ll have access to the Public folder contents. Set up Sharing on XP If you want to access a shared folder from the Vista computer located on the XP machine, it’s the same process in reverse. On the XP computer in Shared Documents, right-click on the folder you want to share and select Sharing and Security. Then select the radio button next to Share this folder and click Ok. Go into Computer Management and create a new user… Now from the Vista machine double click on the XP machine icon, enter the password, then access the folders and files you need. If you have multiple versions of Windows on your home network, you’ll now be able to access files and folders from each of them. If you want to share between Windows 7 and XP check out our article on how to share files and printers between Windows 7 and XP. You might also want to check out our article on how to share files and printers between Windows 7 and Vista. Similar Articles Productive Geek Tips Show Hidden Files and Folders in Windows 7 or VistaHow To Share Files and Printers Between Windows 7 and VistaShare Files and Printers between Windows 7 and XPHow To Share a Folder the XP Way in Windows VistaMoving Your Personal Data Folders in Windows Vista the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor Add Multiple Tabs to Office Programs The Wearing of the Green – St. Patrick’s Day Theme (Firefox) Perform a Background Check on Yourself

  Read the article

• Copy New Files Only in .NET

  - by psheriff

  Recently I had a client that had a need to copy files from one folder to another. However, there was a process that was running that would dump new files into the original folder every minute or so. So, we needed to be able to copy over all the files one time, then also be able to go back a little later and grab just the new files. After looking into the System.IO namespace, none of the classes within here met my needs exactly. Of course I could build it out of the various File and Directory classes, but then I remembered back to my old DOS days (yes, I am that old!). The XCopy command in DOS (or the command prompt for you pure Windows people) is very powerful. One of the options you can pass to this command is to grab only newer files when copying from one folder to another. So instead of writing a ton of code I decided to simply call the XCopy command using the Process class in .NET. The command I needed to run at the command prompt looked like this: XCopy C:\Original\*.* D:\Backup\*.* /q /d /y What this command does is to copy all files from the Original folder on the C drive to the Backup folder on the D drive. The /q option says to do it quitely without repeating all the file names as it copies them. The /d option says to get any newer files it finds in the Original folder that are not in the Backup folder, or any files that have a newer date/time stamp. The /y option will automatically overwrite any existing files without prompting the user to press the "Y" key to overwrite the file. To translate this into code that we can call from our .NET programs, you can write the CopyFiles method presented below. C# using System.Diagnostics public void CopyFiles(string source, string destination){  ProcessStartInfo si = new ProcessStartInfo();  string args = @"{0}\*.* {1}\*.* /q /d /y";   args = string.Format(args, source, destination);   si.FileName = "xcopy";  si.Arguments = args;  Process.Start(si);} VB.NET Imports System.Diagnostics Public Sub CopyFiles(source As String, destination As String)  Dim si As New ProcessStartInfo()  Dim args As String = "{0}\*.* {1}\*.* /q /d /y"   args = String.Format(args, source, destination)   si.FileName = "xcopy"  si.Arguments = args  Process.Start(si)End Sub The CopyFiles method first creates a ProcessStartInfo object. This object is where you fill in name of the command you wish to run and also the arguments that you wish to pass to the command. I created a string with the arguments then filled in the source and destination folders using the string.Format() method. Finally you call the Start method of the Process class passing in the ProcessStartInfo object. That's all there is to calling any command in the operating system. Very simple, and much less code than it would have taken had I coded it using the various File and Directory classes. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free video on Silverlight entitled Silverlight XAML for the Complete Novice - Part 1.  

  Read the article

• K2 4.5 Quick Thoughts

  I just finished attending a webcast on K2 4.5 and I thought Id share a few quick thoughts. Power User Story Improved Given it is just a presentation and I havent actually played with it, the story seemed improved and more believable that real world power users would be able to define workflows in SharePoint.  Power users who would be comfortable with Excel functions may be able to do some more worthwhile workflows since there is new support for inline functions and conditions.  The new SilverLight K2 designer seems pretty user friendly, though the dialog windows can really stack up which may get confusing.  I thought the neatest part was that the workflow can be defined just by starting with a SharePoint Lists settings which may be okay for some organizations and simpler workflows that dont need to define the workflow and push it through lots of testing in different environments.  The standalone K2 Studio is back.  In K2 2003 it was required because Visual Studio integration didnt exist.  Its back now for use by power users who need functionality up to the point of code.  Not sure if this Administration/Installation Installation is supposed to be simplified, with unattended install and other details I didnt catch.  Install and configuration has always seemed daunting to me so anything to improve that is good.  Related to that there is a new tool that is meant to help diagnose issues in your installation.  That may include figuring out missing permissions or services that arent running.  Also, now all K2 SharePoint features deployed as solutions. Dynamic SQL Service Broker Create a smart object to go against a table that you created, NOT the SmartBox.  This seems promising and something that maybe should have been there all along. Reference Event Allows you to call functionally that youve referenced, in the sample showing it was calling a web service that was referenced.  It seemed odd because it was really like writing code using dialogs (call constructor, set timeout, call web service method).  Seemed a little odd to me. Help We were reminded that help.k2.com site is newish site that is supposed to be the MSDN of K2 for partners and customers. VS 2010 Support Still no hard date on this, but what we were told is approximately 90 days after VS 2010 is officially released.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Go for the Deep Dive on Oracle Products and Technology

  - by Oracle OpenWorld Blog Team

  by Karen Shamban Oracle University gives you more learning for your conference investment. It’s easier than ever before to get in-depth Oracle product and technology training if you’re attending any of the Oracle conferences this fall, including Oracle OpenWorld, the Oracle Customer Experience Summit @ OpenWorld, the Oracle PartnerNetwork Exchange @ OpenWorld, and MySQL Connect. Why is it easier? Because Oracle University preconference training takes place on Sunday, September 30 from 8:00 a.m. to 3:30 p.m. And you’re going to be in town for the conference anyway, right? The training ends early enough in the afternoon that you’ll still be able to get good seats for conference opening keynotes and get psyched for the welcome reception that follows. Each session will be taught by an expert Oracle University instructor and will be fact-packed with demos and tips to help you do more than ever before with your Oracle product and technology investment. The training sessions being offered include: Applications:·             PeopleSoft Test Framework Script Creation and Optimization·             New Integration Technologies for PeopleTools 8.52·             Oracle Fusion Applications: Security Fundamentals Database and Systems:·             Certification Exam Cram: Oracle Database 11g: New Features for Administrators·             Exadata Database Machine Administration Workshop·             Introduction to Big Data·             Using Oracle Enterprise Manager Cloud Control 12c·             Using Java - for PL/SQL and Database Developers Fusion Middleware:·             Developing Portable Java EE Applications with the Enterprise JavaBeans 3.1 API and Java Persistence API 2.0·             Developing Secure Java Web Services·             How The Latest Java EE and SOA Help in Architecting and Designing Robust Enterprise Applications·             Oracle Business Intelligence 11g: Overview to Analyses and Dashboards·             Oracle Fusion Middleware 11g: Build Applications with ADF I·             Oracle Fusion Middleware 11g Administer Forms Services·             Oracle SOA Suite 11g Administration·             WebLogic Server Administration Essentials Don’t miss this great opportunity to maximize your Oracle OpenWorld experience and investment. Learn more about Oracle University training sessions.

  Read the article

• Viewing at Impossible Angles

  - by kemer

  The picture of the little screwdriver with the Allen wrench head to the right is bound to invoke a little nostalgia for those readers who were Sun customers in the late 80s. This tool was a very popular give-away: it was essential for installing and removing Multibus (you youngsters will have to look that up on Wikipedia…) cards in our systems. Back then our mid-sized systems were gargantuan: it was routine for us to schlep around a 200 lb. desk side box and 90 lb. monitor to demo a piece of software your smart phone will run better today. We were very close to the hardware, and the first thing a new field sales systems engineer had to learn was how put together a system. If you were lucky, a grizzled service engineer might run you through the process once, then threaten your health and existence should you ever screw it up so that he had to fix it. Nowadays we make it much easier to learn the ins and outs of our hardware with simulations–3D animations–that take you through the process of putting together or replacing pieces of a system. Most recently, we have posted three sophisticated PDFs that take advantage of Acrobat 9 features to provide a really intelligent approach to documenting hardware installation and repair: Sun Fire X4800/X4800 M2 Animations for Chassis Components Sun Fire X4800/X4800 M2 Animations for Sub Assembly Module (SAM) Sun Fire X4800/X4800 M2 Animations for CMOD Download one of these documents and take a close look at it. You can view the hardware from any angle, including impossible ones. Each document has a number of procedures, that break down into steps. Click on a procedure, then a step and you will see it animated in the drawing. Of course hardware design has generally eliminated the need for things like our old giveaway tools: components snap and lock in. Often you can replace redundant units while the system is hot, but for heaven’s sake, you’ll want to verify that you can do that before you try it! Meanwhile, we can all look forward to a growing portfolio of these intelligent documents. We would love to hear what you think about them. –Kemer

  Read the article

• How to Use Your Android Phone as a Modem; No Rooting Required

  - by Jason Fitzpatrick

  If your cellular provider’s mobile hotspot/tethering plans are too pricey, skip them and tether your phone to your computer without inflating your monthly bill. Read on to see how you can score free mobile internet. We recently received a letter from a How-To Geek reader, requesting help linking their Android phone to their laptop to avoid the highway robbery their cellular provider was insisting upon: Dear How-To Geek, I recently found out that my cellphone company charges $30 a month to use your smartphone as a data modem. That’s an outrageous price when I already pay an extra $15 a month charge just because they insist that because I have a smartphone I need a data plan because I’ll be using so much more data than other users. They expect me to pay what amounts to a $45 a month premium just to do some occasional surfing and email checking from the comfort of my laptop instead of the much smaller smartphone screen! Surely there is a work around? I’m running Windows 7 on my laptop and I have an Android phone running Android OS 2.2. Help! Sincerely, No Double Dipping! Well Double Dipping, this is a sentiment we can strongly related to as many of us on staff are in a similar situation. It’s absurd that so many companies charge you to use the data connection on the phone you’re already paying for. There is no difference in bandwidth usage if you stream Pandora to your phone or to your laptop, for example. Fortunately we have a solution for you. It’s not free-as-in-beer but it only costs $16 which, over the first year of use alone, will save you $344. Let’s get started! Latest Features How-To Geek ETC What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Make Efficient Use of Tab Bar Space by Customizing Tab Width in Firefox See the Geeky Work Done Behind the Scenes to Add Sounds to Movies [Video] Use a Crayon to Enhance Engraved Lettering on Electronics Adult Swim Brings Their Programming Lineup to iOS Devices Feel the Chill of the South Atlantic with the Antarctica Theme for Windows 7 Seas0nPass Now Offers Untethered Apple TV Jailbreaking

  Read the article

• SSIS Expression Editor & Tester

  Published today on CodePlex is the SSIS Expression Editor & Tester project. If you want to try it just pop over to CodePlex and download it. About five years ago I developed my own expression editor control. It first got used in our custom tasks as the MS editor didn’t become available until SQL 2005 SP1, but even then it had some handy features I preferred. For example resizable panes so that if your expression result was more than two lines you could see them all. It also meant I could change the functions available in the tree view, the most obvious use being to add some handy snippets and samples that I used a lot. This quickly developed into a small expression testing tool. I’d develop complex expressions using my editor and then copy it back into the package itself. I have been meaning to make the tool available for some time and finally made the effort, the code is checked-in and the signed downloads are published on CodePlex. There are two flavours, SQL 2005 or 2008, and just a simple zip file to download and extract. The tool doesn’t need installing, and is completely portable. It does need SSIS to be installed on the local machine though. Each zip file contains two files: ExpressionTester.exe – The tool itself, run this. ExpressionEditor.dll – The reusable editor control. A while ago the gentlemen behind BIDS Helper noticed the editor on a task and asked about using it. This became incorporated into their variable window extensions feature. To try and help them and anyone else that wants to use the editor control, it is available as a single assembly that you can reference yourself, and of course all the source code is on CodePlex too. Just add a reference to the ExpressionEditor.dll assembly and you should be up and running in no time. There is a sample project Package Test in the source code which shows how to use the editor control form in it’s simplest form, or if you want to host control directly then the tester tool is a perfect example.

  Read the article

• Old School Wizardry Tip: Batch File Comments

  - by jkauffman

  Johnny, the Endangered Keyboard-Driven Windows User Some of my proudest, obscure Windows tricks are losing their relevance. I know I’m not alone. Keyboard shortcuts are going the way of the dodo. I used to induce fearful awe by slapping Ctrl+Shift+Esc in front of the lowly, pedestrian Windows users. No windows key on the keyboard? No problem: Ctrl+Esc. No menu key on the keyboard: Shift+F10. I am also firmly planted in the habit of closing windows with the Alt+Space menu (Alt+Space, C); and I harbor a brooding, slow=growing list of programs that fail to support this correctly (that means you, Paint.NET). Every time a new version of windows comes out, the support for some of these minor time-saving habits get pared out. Will I complain publicly? Nope, I know my old ways should be axed to conserve precious design energy. In fact, I disapprove of fierce un-intuitiveness for the sake of alleged productivity. Like vim, for example. If you approach a program after being away for 5 years, having to recall encyclopedic knowledge is a flaw. The RTFM disciples have lost. Anyway, some of the items in my arsenal of goofy time-saving tricks are still relevant today. I wanted to draw attention to one that’s stood the test of time. Remember Batch Files? Yes, it’s true, batch files are fading faster than the world of print. But they're not dead yet. I still run into some situations where I opt to use batch files. They are still relevant for build processes, or just various development workflow tools. Sure, there’s powershell, but there’s that stupid Set-ExecutionPolicy speed bump standing in your way; can you really spare the time to A) hunt down that setting on all machines affected and/or B) make futile efforts to convince your coworkers/boss that the hassle was worth it? When possible, I prefer the batch file wild card. And whenever I return to batch files, I end up researching some of the unintuitive aspects such as parameters, quote handling, and ERRORLEVEL. But I never have to remember to use “REM” for comment lines, because there’s a cleaner way to do them! Double Colon For Eye-Friendly Comments Here is a very simple batch file, with pretty much minimal content: @ECHO OFF SETLOCAL REM This is a comment ECHO This batch file doesn’t do much If you code on a daily basis, this may be more suitable to your eyes: @ECHO OFF SETLOCAL :: This is a comment ECHO This batch file doesn’t do much Works great! I imagine I find it preferable due to the similarity to comments in other situations: // or ;  or # I’ve often make visual pseudo-line breaks in my code, and this colon-based syntax works wonders: @ECHO OFF SETLOCAL :: Do stuff ECHO Doing Stuff :::::::::::::::::::::::::::: :: Do more stuff ECHO This batch file doesn’t do much Not only is it more readable, but there’s a slight performance benefit. The batch file engine sees this as an invalid line label and immediately reads the following line. Use that fact to your advantage if this trick leads you into heated nerd debate. Two Pitfalls to Avoid Be aware of that there are a couple situations where this hack will fail you. It most likely won’t be a problem unless you’re getting really sophisticated with your batch files. Pitfall #1: Inline comments @ECHO OFF SETLOCAL IF EXIST C:\SomeFile.txt GOTO END ::This will fail :END Unfortunately, this fails. You can only have whitespace to the left of your comments. Pitfall #2: Code Blocks @ECHO OFF SETLOCAL IF EXIST C:\SomeFile.txt (         :: This will fail         ECHO HELLO ) Code blocks, such as if statements and for loops, cannot contain these comments. This is ultimately due to the fact that entire code blocks are processed as a single line. I originally learned this from Rob van der Woude’s site. He goes into more depth about the behavior of the pitfalls as well, if you are interested in further details. I hope this trick earns you serious geek rep!

  Read the article

• Unrated Easy iOS 6.1.4/6.1.3 Unlock/Jailbreak iPhone 5/4S/4/3GS Untehtered System

  - by user171772

  Popular jailbreak tool Unlock-Jailbreak.net – compiled by the iPhone Team – has just been updated with full support for Unlock/Jailbreak iPhone 5/4S/4/3GS iOS 6.1.4 and 6.1.3/6.0.1 Untethered. You may have caught our tutorial, which detailed how one could jailbreak their device tethered using Redsn0w, although since it was a pre-iOS 6.1.1 release, users needed to "point" the tool to the older firmware. Team Unlock-Jailbreak was established few years ago, combines some of the jailbreak and unlock community’s most talented developers all known for producing reliable jailbreaks in the past. This team was assembled in order to develop a reliable untethered jailbreak and unlock iphone 5,4S,4 iOS 6.1 for post-A5 devices, including the iPhone 5, the iPad mini and the latest-generation iPad. This has now been achieved with the just-released userland jailbreak tool, known as Unlock-Jailbreak.net. To Jailbreak and Unlock your iPhone 5/4/4S/3GS iOS 6.1.4 and 6.1.3 visit the official website http://www.Unlock-Jailbreak.net http://www.Unlock-Jailbreak.net was formed in mid 2008 and have successfully jailbroken over 250,000 iPhones worldwide. This is unparalleled by any other service in the industry. They have achieved this by combining a very simple solution with a fantastic customer service department that is available 24/7 through many forms of contact, including telephone. Unlock-Jailbreak from Unlock-Jailbreak.nethas been downloaded by over 250,000 customers located in over 145 countries. To further ensure customers of its products usability, Unlock-Jailbreak offers a 100% full money back guarantee on all orders. Customers dissatisfied with the company’s product will be given a full refund, no questions asked. One good advantage of the software is that the jailbreaking and unlocking process is coampletely reversible and there will be no evidence that the iPhone has been jailbroken and unlocked . iOS 6.1/6.1.4 and 6.1.3 comes with many new features and updates for multitasking and storage. By unlocking and jailbreaking the iPhone,Unlock/Jailbreak iPhone 5/4S/4/3GS iOS 6.1/6.1.4 and 6.1.3/6.0.1 Untethered unleash unlimited possibilities to improve this already fantastic experience and the iPhone FULL potential. Before going through any jailbreak process with Unlock-Jailbreak it is always good housekeeping to perform a full backup of all information on the device. It is unlikely that anything will go wrong during the process but when undertaking any process that modifies the internals of a file system it is always prudent to err on the side of caution.

  Read the article

• Find a Faster DNS Server with Namebench

  - by Mysticgeek

  One way to speed up your Internet browsing experience is using a faster DNS server. Today we take a look at Namebench, which will compare your current DNS server against others out there, and help you find a faster one. Namebench Download the file and run the executable (link below). Namebench starts up and will include the current DNS server you have configured on your system. In this example we’re behind a router and using the DNS server from the ISP. Include the global DNS providers and the best available regional DNS server, then start the Benchmark. The test starts to run and you’ll see the queries it’s running through. The benchmark takes about 5-10 minutes to complete. After it’s complete you’ll get a report of the results. Based on its findings, it will show you what DNS server is fastest for your system. It also displays different types of graphs so you can get a better feel for the different results. You can export the results to a .csv file as well so you can present the results in Excel. Conclusion This is a free project that is in continuing development, so results might not be perfect, and there may be more features added in the future. If you’re looking for a method to help find a faster DNS server for your system, Namebench is a cool free utility to help you out. If you’re looking for a public DNS server that is customizable and includes filters, you might want to check out our article on helping to protect your kids from questionable content using OpenDNS. You can also check out how to speed up your web browsing with Google Public DNS. Links Download NameBench for Windows, Mac, and Linux from Google Code Learn More About the Project on the Namebench Wiki Page Similar Articles Productive Geek Tips Open a Second Console Session on Ubuntu ServerShare Ubuntu Home Directories using SambaSetup OpenSSH Server on Ubuntu LinuxDisable the Annoying “This device can perform faster” Balloon Message in Windows 7Search For Rows With Special Characters in SQL Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app

  Read the article

• OpenWorld Day 1

  - by Antony Reynolds

  A Day in the Life of an OpenWorld Attendee Part I Lots of people are blogging insightfully about OpenWorld so I thought I would provide some non-insightful remarks to buck the trend! With 50,000 attendees I didn’t expect to bump into too many people I knew, boy was I wrong!  I walked into the registration area and immediately was hailed by a couple of customers I had worked with a few months ago.  Moving to the employee registration area in a different hall I bumped into a colleague from the UK who was also registering.  As soon as I got my badge I bumped into a friend from Ireland!  So maybe OpenWorld isn’t so big after all! First port of call was Larrys Keynote.  As always Larry was provocative and thought provoking.  His key points were announcing the Oracle cloud offering in IaaS, PaaS and SaaS, pointing out that Fusion Apps are cloud enabled and finally announcing the 12c Database, making a big play of its new multi-tenancy features.  His contention was that multi-tenancy will simplify cloud development and provide better security by providing DB level isolation for applications and customers. Next day, Monday, was my first full day at OpenWorld.  The first session I attended was on monitoring of OSB, very interesting presentation on the benefits achieved by an Illinois area telco – US Cellular.  Great discussion of why they bought the SOA Management Packs and the benefits they are already seeing from their investment in terms of improved provisioning and time to market, as well as better performance insight and assistance with capacity planning. Craig Blitz provided a nice walkthrough of where Coherence has been and where it is going. Last night I attended the BOF on Managed File Transfer where Dave Berry replayed Oracles thoughts on providing dedicated Managed File Transfer as part of the 12c SOA release.  Dave laid out the perceived requirements and solicited feedback from the audience on what if anything was missing.  He also demoed an early version of the functionality that would simplify setting up MFT in SOA Suite and make tracking activity much easier. So much for Day 1.  I also ran into scores of old friends and colleagues and had a pleasant dinner with my friend from Ireland where I caught up on the latest news from Oracle UK.  Not bad for Day 1!

  Read the article

• Developer Preview available for the Java Access Bridge is now included in Java SE 7 Update 6

  - by Ragini Prasad

  The Java Access Bridge product is now being included with Java SE 7u6. Manual installation of the Java Access Bridge will no longer be required. All Access Bridge files will be automatically installed by the JRE and the JDK.             The Developer Preview for this feature is now available and can be downloaded from http://jdk7.java.net/download.html.            By default, the Java Access Bridge is disabled. In order to use the Java Access Bridge, enable it using the steps mentioned below and test your applications for accessibility.             Enable the Java Access Bridge: Use one of these mechanism:             1. Ease Of Access control panel.     On Windows Vista and later the Java Access Bridge can be enabled     from Ease of Access Center.     Select "Use the computer without a display". In "Other programs     installed" section , select the check box to     "Enable Java Access Bridge" and apply. 2. Or run the following command in the Command Window.     %JRE_HOME%\bin\jabswitch -enable Note: You must restart your Assistive Technology software and Java application after enabling the bridge.             Test the Java Access Bridge: 1. Enable the Java Access Bridge as described above. 2. Run an Assistive Technology that supports the Java Access Bridge. 3. Run a Java application. Ensure that the Assistive Technology  reads    the values of your application. Disable the Java Access Bridge:             Run the following command from the Command Window.     %JRE_HOME%\bin\jabswitch -disable                 Note: The Ease Of Access control panel cannot be used to disable the bridge. You must use jabswitch from the Command window to disable the Java Access Bridge.

  Read the article

• Getting Started with NASM

  - by MarkPearl

  Today I got to play with NASM. This is an assembler and disassembler that can be used to write 16-bit, 32-bit & 64-bit programs. Let me say upfront that the last time I looked at assembly code at any depth was when I was studying Computer Science in Pietermaritzburg – ten years ago – and we never ever got to touch any real assembly code so a lot of what I am looking at today is very new to me. The first thing I did was download NASM compiler. This turned out to be a bit more complicated than I thought. Originally I went to http://www.nasm.us/ and downloaded the nasm-2.09.04.zip file which I thought had all I needed. No luck! It seemed to just have the uncompiled code, and from what I could tell I would need to recompile and build it – possibly in c++? Well, I wasn’t going to waste my time with that, so a bit more searching and I found the Win32 (http://www.nasm.us/pub/nasm/releasebuilds/2.09.04/win32/) folder Nasm.exe which I downloaded. Choosing an IDE So, I have NASM compiler but to compile anything you need to pass a string of special characters in the command prompt. That’s fine if I was going to just do one program once every couple of years, but since I am aiming to do quite a bit more exploration of NASM I began searching for an IDE. There were a few options, even apparently Visual Studio with a bit of tweeking could do the job, but from past experience I wanted to avoid the VS route as it can sometimes get confusing. I eventually settled on TextPad which I had used a few years ago for a similar project and it had been simple enough yet powerful enough to do the job. A bit of searching and I found a syntax file for NASM and everything seemed hunky dory. Configuring TextPad to run the NASM Compiler Next was to get TextPad to run the NASM compiler. TextPad has this external tools option that allows one to configure special commands. To simplify the process I first created a bat file in the NASM directory that allowed me to simply compile asm files. The bat file was called as.bat and had just one line of code… nasm -f bin %1.asm -o %1.com -l %1.lst Once I had created as.bat I just needed to go into TextPad and create a tool. I have made a quick video of that just showing you where the various settings are which is viewable below. The 64Bit Problem So I now have an ‘IDE’ linked to my NASM compiler so everything should be fine right? No! Whenever I tried to compile an asm program it compiles fine, but when I try and run it I get an error – “This version of the file is not compatible with the version Windows you’re running. Check your computer’s system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher." Well.. it turns out there are a few complications with having a 64 bit OS! So after searching google and coming to any real solution that I could find other than perhaps attempting to build the code for nasm, I eventually resorted to running a VM with Windows XP on it and putting NASM there… My first hello world program So I attempt my first hello world program as per an example I found… the code was quite simple and is shown below… bits16 org 0x100 jmp main message: db 'Hello World',0ah,0dh,'$' main: mov dx,message mov ah,09 int 21h int 20h Running the build tool from TextPad and everything compiles fine and I now have a console app with helllo world shown. Conclusion It’s very early days with NASM. I have been spoilt with Visual Studio and high order languages so I assume it will be a painful ride getting into the basics of assembly programming but I am hoping that at the end of it, I will at least have a bit more exposure to a language closer to the metal.

  Read the article

• ASP.NET MVC 3 Hosting :: Deploying ASP.NET MVC 3 web application to server where ASP.NET MVC 3 is not installed

  - by mbridge

  You can built sample application on ASP.NET MVC 3 for deploying it to your hosting first. To try it out first put it to web server where ASP.NET MVC 3 installed. In this posting I will tell you what files you need and where you can find them. Here are the files you need to upload to get application running on server where ASP.NET MVC 3 is not installed. Also you can deploying ASP.NET MVC 3 web application to server where ASP.NET MVC 3 is not installed like this example: you can change reference to System.Web.Helpers.dll to be the local one so it is copied to bin folder of your application. First file in this list is my web application dll and you don’t need it to get ASP.NET MVC 3 running. All other files are located at the following folder: C:\Program Files\Microsoft ASP.NET\ASP.NET Web Pages\v1.0\Assemblies\ If there are more files needed in some other scenarios then please leave me a comment here. And… don’t forget to convert the folder in IIS to application. While developing an application locally, this isn’t a problem. But when you are ready to deploy your application to a hosting provider, this might well be a problem if the hoster does not have the ASP.NET MVC assemblies installed in the GAC. Fortunately, ASP.NET MVC is still bin-deployable. If your hosting provider has ASP.NET 3.5 SP1 installed, then you’ll only need to include the MVC DLL. If your hosting provider is still on ASP.NET 3.5, then you’ll need to deploy all three. It turns out that it’s really easy to do so. Also, ASP.NET MVC runs in Medium Trust, so it should work with most hosting providers’ Medium Trust policies. It’s always possible that a hosting provider customizes their Medium Trust policy to be draconian. Deployment is easy when you know what to copy in archive for publishing your web site on ASP.NET MVC 3 or later versions. What I like to do is use the Publish feature of Visual Studio to publish to a local directory and then upload the files to my hosting provider. If your hosting provider supports FTP, you can often skip this intermediate step and publish directly to the FTP site. The first thing I do in preparation is to go to my MVC web application project and expand the References node in the project tree. Select the aforementioned three assemblies and in the Properties dialog, set Copy Local to True. Now just right click on your application and select Publish. This brings up the following Publish wizard Notice that in this example, I selected a local directory. When I hit Publish, all the files needed to deploy my app are available in the directory I chose, including the assemblies that were in the GAC. Another ASP.NET MVC 3 article: - New Features in ASP.NET MVC 3 - ASP.NET MVC 3 First Look

  Read the article

• Get to Know a Candidate (8 of 25): Rocky Anderson&ndash;Justice Party

  - by Brian Lanham

  DISCLAIMER: This is not a post about “Romney” or “Obama”. This is not a post for whom I am voting. Information sourced for Wikipedia. Ross Carl “Rocky” Anderson served two terms as the 33rd mayor of Salt Lake City, Utah, between 2000 and 2008.  He is the Executive Director of High Road for Human Rights.  Prior to serving as Mayor, he practiced law for 21 years in Salt Lake City, during which time he was listed in Best Lawyers in America, was rated A-V (highest rating) by Martindale-Hubbell, served as Chair of the Utah State Bar Litigation Section[4] and was Editor-in-Chief of, and a contributor to, Voir Dire legal journal. As mayor, Anderson rose to nationwide prominence as a champion of several national and international causes, including climate protection, immigration reform, restorative criminal justice, LGBT rights, and an end to the "war on drugs". Before and after the invasion by the U.S. of Iraq in 2003, Anderson was a leading opponent of the invasion and occupation of Iraq and related human rights abuses. Anderson was the only mayor of a major U.S. city who advocated for the impeachment of President George W. Bush, which he did in many venues throughout the United States. Anderson's work and advocacy led to local, national, and international recognition in numerous spheres, including being named by Business Week as one of the top twenty activists in the world on climate change,serving on the Newsweek Global Environmental Leadership Advisory Board, and being recognized by the Human Rights Campaign as one of the top ten straight advocates in the United States for LGBT equality. He has also received numerous awards for his work, including the EPA Climate Protection Award, the Sierra Club Distinguished Service Award, the Respect the Earth Planet Defender Award, the National Association of Hispanic Publications Presidential Award, The Drug Policy Alliance Richard J. Dennis Drugpeace Award, the Progressive Democrats of America Spine Award, the League of United Latin American Citizens Profile in Courage Award, the Bill of Rights Defense Committee Patriot Award, the Code Pink (Salt Lake City) Pink Star honor, the Morehouse University Gandhi, King, Ikeda Award, and the World Leadership Award for environmental programs. Formerly a member of the Democratic Party, Anderson expressed his disappointment with that Party in 2011, stating, “The Constitution has been eviscerated while Democrats have stood by with nary a whimper. It is a gutless, unprincipled party, bought and paid for by the same interests that buy and pay for the Republican Party." Anderson announced his intention to run for President in 2012 as a candidate for the newly-formed Justice Party. Although founded by Rocky Anderson of Utah, the Justice Party was first recognized by Mississippi and describes itself as advocating economic justice through measures such as green jobs and a right to organize, environment justice through enforcing employee safeguards in trade agreements, and social and civic justice through universal health care. In its first press release, the Utah Justice Party set forth its goals for justice in the economic, environmental, social and civic realms, along with a call to rid the corrupting influence of big money from government, to reverse the erosion of rights guaranteed by the Constitution, and to stop draining American resources to support illegal wars of aggression. Its press release says its grassroots supporters believe that now is the time for all to "shed their skeptical view that their voices don't matter", that "our 2-party system is a 'duopoly' controlled by the same corporate and military interests", and that the people must act to ensure "that our nation will achieve a brighter, sustainable future.” Anderson has ballot access in CO, CT, FL, ID, LA, MI, MN, MS, NJ, NM, OR, RI, TN, UT, VT, WA (152 electoral votes) and has write-in access in AL, AK, DE, GA, IL, IO, KS, MD, MO, NE, NH, NY, PA, TX Learn more about Rocky Anderson and Justice Party on Wikipedia.

  Read the article

< Previous Page | 487 488 489 490 491 492 493 494 495 496 497 498  | Next Page >