Search Results

Search found 15439 results on 618 pages for 'wls configuration'.

Page 493/618 | < Previous Page | 489 490 491 492 493 494 495 496 497 498 499 500  | Next Page >

• How can I control which sound card Ubuntu uses for playback?

  - by GorillaSandwich

  I am dual-booting Ubuntu 9.04 and Windows XP but am new to Ubuntu. In Windows, I use an M-Audio Audiophile 2496 sound card for recording (because it has RCA input jacks for my mixer), but I don't use it for playback (because my speakers use a 1/8 inch jack); instead, I use the motherboard's built-in sound card. I tried to recreate this arrangement in Ubuntu, but despite selecting the built-in card for all playback under System > Preferences > Sound, I still have inconsistent results. Rhythmbox plays back through the integrated card, but Flash content in the browser and games in the OS send their audio to the Audiophile card. I have seen recommendations to use a program called "Jack" to control this, but I installed it and found it baffling. How can I control which card is used for playback, other than disabling one card (as I discovered how to do and explain below)? Also, is there a GUI for disabling hardware, or is it necessary to edit a configuration file?

  Read the article

• SBD killing both cluster nodes when there are even small SAN network problems

  - by Wieslaw Herr

  I am having problems with stonith SBD in a openais-based cluster. Some background: The active/passive cluster has two nodes, node1 and node2. They are configured to provide an NFS service to users. To avoid problems with split-brain, they are both configured to use SBD. SBD is using two 1MB disks available to the hosts via an multipath fibre-channel network. The problems start if something happens with the SAN network. For example, today one of the brocade switches got rebooted and both nodes lost 2 out of 4 paths to each disks, which resulted in both nodes committing suicide and rebooting. This, of course, was highly undesirable because a) there were paths left b) even if the switch would be out for 10-20 seconds a reboot cycle of both nodes would take 5-10 minutes and all NFS-locks would be lost. I tried increasing the SBD timeout values (to 10sec+ values, dump attached at the end), however a "WARN: Latency: No liveness for 4 s exceeds threshold of 3 s" hints that something isn't working as I would it expect to. Here is what I would like to know: a) Is SBD working as it should killing nodes when 2 paths are available? b) If not, is the multipath.conf file attached correct? The storage controller we use is an IBM SVC (IBM 2145), should there be any specific configuration for it? (as in multipath.conf.defaults) c) How should I go about increasing the timeouts in SBD attachements: Multipath.conf and sbd dump (http://hpaste.org/69537)

  Read the article

• Can't upgrade NVIDIA GeForce 310M display driver on Acer Aspire 5745PG

  - by Emerson

  I've been for days already trying to update my video driver. I have an Acer Aspire 5745PG with a "NVIDIA GeForce 310M" board, and I was trying to run Sony Vegas video editor with Boris Continunn plugins. It happened that some of the plugins, like BCC Text Extrude wouldn't work, showing the message "Insufficient depth resolution to run Blue". I then read somewhere that updating the display driver would do the trick. That was when my nightmares started, I lost already good 3 nights trying to sort this out, without success :( The display driver that was before (and that I current have after restoring) was the version 8.16.11.8997. First thing I tried was downloading the 8.17.12.6619 driver directly from Acer, which was shown as the latest version from Acer website: http://support.acer.com/product/default.aspx?modelId=2466 Running it would say "Diver Package Failure - Setup failed to read the required Display Driver to be used with this package" I then tried directly the NVIDIA own driver, which the latest was version 296.10: http://us.download.nvidia.com/Windows/296.10/296.10-notebook-win7-winvista-64bit-international-whql.exe That gave me similar error message :/ So after some researching I found out that some people had the same issue and they had to change the configuration file to allow the installer to recognize this NVIDIA board: http://forums.nvidia.com/index.php?showtopic=222904 That topic said to look for the "Device Instance Id" property of the "NVIDIA GeForce 310M" display , which I couldn't find, instead I found the "Hardware Id", which seemed to be the right one. I followed the instructions and changed the inf file first for the Acer installation, and after for the NVIDIA own driver. It actually managed to go ahead with the installation in both instances, but the only thing I got was a black screen, while the computer still apeared to be running fine. I had to hard reset, and then it would come back with generic vga driver. I could only get my display back using the recovery function. I imagine thousands of this notebook was sold, and it can't have its driver updated?? Could someone help me with this?? Thanks Echo

  Read the article

• CloudFront for dynamic content CDN

  - by Elad Lachmi

  I would like to use CF as a CDN for my entire site, including static and dynamic content. I have been using CF for static content for a while and I am very happy with the results. I am now doing POC of putting the web server completely behind CF. For the dynamic content I created a new distribution and set the origin to be my web server. Right now I'm looking to test the solution, so I have the web server on the original domain and the CF distribution on the amazon domain. This works with the exception of HTTPS urls and POST requests. For HTTPS requests, I see the requests are forwarded to the original site domain for now, but how will CF handle them when I move the distribution to the www cname? What configuration changes should I make so that CF forwards HTTPS requests to the origin? For POST requests, I want the post to be made to the origin server. Can I set this up in CF? Finally, the site has membership. Can I configure CF to pull all content from the origin if the user is logged in? Sorry for the long question. I'm a little lost and documentation for dynamic CF is still kind of scarce. Thank you!

  Read the article

• Share Firefox/Thnderbird data between W7 and Linux Mint 12 in dual boot computer

  - by Albert

  I've just set up my laptop (where I had running only W7) with a dual boot to run Linux Mint 12 as well. I have a "Data" partition (apart from the required partitions for W7 and Linux) where I store pretty much everything that isn't software installations (music, videos, project files, etc). I seem to be able to access that NTFS partition totally fine from Mint (like I've always done with W7), which is cool because I can access all that stuff regardless of which OS I'm using. I would like to know if it's possible (and how) to go one step further and share programs data between the two OS. One example would be my Firefox and Thunderbird data. For example, in Firefox share my bookmarks (and if I could share history, autocomplete and all that stuff, that would be awesome). In thunderbird, be able to share my mail and configuration, seeing the same inbox, folders, message rules, etc... So if I receive/send an email from W7 and later switch to Mint, I can see that email as it had been received/sent from Mint, and vice versa. Is this even possible? Or am I asking for too much convenience? If it's possible, any clues on how to set it all up?

  Read the article

• rsnapshot - not correctly archiving mysql databases

  - by Tiffany Walker

  My rsnapshot configuration: snapshot_root /.snapshots/ backup /home/user localhost/ backup_script /usr/local/backup_mysql.sh localhost/mysql/ Using this file: NOW=$(date +"%m-%d-%Y") # mm-dd-yyyy format FILE="" # used in a loop ### Server Setup ### #* MySQL login user name *# MUSER="root" #* MySQL login PASSWORD name *# MPASS="YOUR-PASSWORD" #* MySQL login HOST name *# MHOST="127.0.0.1" #* MySQL binaries *# MYSQL="$(which mysql)" MYSQLDUMP="$(which mysqldump)" GZIP="$(which gzip)" # get all database listing DBS="$($MYSQL -u $MUSER -h $MHOST -p$MPASS -Bse 'show databases')" # start to dump database one by one for db in $DBS do FILE=$BAK/mysql-$db.$NOW-$(date +"%T").gz # gzip compression for each backup file $MYSQLDUMP --single-transaction -u $MUSER -h $MHOST -p$MPASS $db | $GZIP -9 > $FILE done It dumps the databases under / I then tried with the following: http://bash.cyberciti.biz/backup/rsnapshot-remote-mysql-backup-shell-script/ I got: rsnapshot hourly ---------------------------------------------------------------------------- rsnapshot encountered an error! The program was invoked with these options: /usr/bin/rsnapshot hourly ---------------------------------------------------------------------------- ERROR: backup_script /usr/local/backup_mysql.sh returned 1 WARNING: Rolling back "localhost/mysql/" ls -la /.snapshots/hourly.0/localhost/mysql total 8 drwxr-xr-x 2 root root 4096 Nov 23 17:43 ./ drwxr-xr-x 4 root root 4096 Nov 23 18:20 ../ What exactly am I doing wrong? EDIT: # /usr/local/backup_mysql.sh *** Dumping MySQL Database *** Database> information_schema..cphulkd..eximstats..horde..leechprotect..logaholicDB_ns1..modsec..mysql..performance_schema..roundcube..test.. *** Backup done [ files wrote to /.snapshots/tmp/mysql] *** root@ns1 [~]# ls -la /.snapshots/tmp/mysql total 8040 drwxr-xr-x 2 root root 4096 Nov 23 18:41 ./ drwxr-xr-x 3 root root 4096 Nov 23 18:41 ../ -rw-r--r-- 1 root root 1409 Nov 23 18:41 cphulkd.18_41_45pm.gz -rw-r--r-- 1 root root 113522 Nov 23 18:41 eximstats.18_41_45pm.gz -rw-r--r-- 1 root root 4583 Nov 23 18:41 horde.18_41_45pm.gz -rw-r--r-- 1 root root 71757 Nov 23 18:41 information_schema.18_41_45pm.gz -rw-r--r-- 1 root root 692 Nov 23 18:41 leechprotect.18_41_45pm.gz -rw-r--r-- 1 root root 2603 Nov 23 18:41 logaholicDB_ns1.18_41_45pm.gz -rw-r--r-- 1 root root 745 Nov 23 18:41 modsec.18_41_45pm.gz -rw-r--r-- 1 root root 138928 Nov 23 18:41 mysql.18_41_45pm.gz -rw-r--r-- 1 root root 1831 Nov 23 18:41 performance_schema.18_41_45pm.gz -rw-r--r-- 1 root root 3610 Nov 23 18:41 roundcube.18_41_45pm.gz -rw-r--r-- 1 root root 436 Nov 23 18:41 test.18_41_47pm.gz MySQL Backup seems fine.

  Read the article

• Security implications of adding www-data to /etc/sudoers to run php-cgi as a different user

  - by BMiner

  What I really want to do is allow the 'www-data' user to have the ability to launch php-cgi as another user. I just want to make sure that I fully understand the security implications. The server should support a shared hosting environment where various (possibly untrusted) users have chroot'ed FTP access to the server to store their HTML and PHP files. Then, since PHP scripts can be malicious and read/write others' files, I'd like to ensure that each users' PHP scripts run with the same user permissions for that user (instead of running as www-data). Long story short, I have added the following line to my /etc/sudoers file, and I wanted to run it past the community as a sanity check: www-data ALL = (%www-data) NOPASSWD: /usr/bin/php-cgi This line should only allow www-data to run a command like this (without a password prompt): sudo -u some_user /usr/bin/php-cgi ...where some_user is a user in the group www-data. What are the security implications of this? This should then allow me to modify my Lighttpd configuration like this: fastcgi.server += ( ".php" => (( "bin-path" => "sudo -u some_user /usr/bin/php-cgi", "socket" => "/tmp/php.socket", "max-procs" => 1, "bin-environment" => ( "PHP_FCGI_CHILDREN" => "4", "PHP_FCGI_MAX_REQUESTS" => "10000" ), "bin-copy-environment" => ( "PATH", "SHELL", "USER" ), "broken-scriptfilename" => "enable" )) ) ...allowing me to spawn new FastCGI server instances for each user.

  Read the article

• cURL - Unkown SSL protocol error - OS X 10.9

  - by saq7

  I am trying to use cURL and get the following error on every https request I make. The error is always the same. HTTP requests work flawlessly. The verbose output is quite useless. Saquibs-MacBook-Pro:~ skothawala$ curl https://google.com -vv * Adding handle: conn: 0x7fe09b803a00 * Adding handle: send: 0 * Adding handle: recv: 0 * Curl_addHandleToPipeline: length: 1 * - Conn 0 (0x7fe09b803a00) send_pipe: 1, recv_pipe: 0 * About to connect() to google.com port 443 (#0) * Trying 74.125.226.129... * Connected to google.com (74.125.226.129) port 443 (#0) * Unknown SSL protocol error in connection to google.com:-9805 * Closing connection 0 curl: (35) Unknown SSL protocol error in connection to google.com:-9805 I have looked through other answers on this forum and other places on the internet, but haven't found an answer. Most people's issues involve particular servers and the configuration of SSL on these servers. Mine however is problematic anytime HTTPS is used (with any website). Can someone please suggest what I should be looking into to solve the problem? Can it be that something is not properly configured? What should I be looking for?

  Read the article

• Winamp playing sound but no video

  - by Greg Sansom

  I am having problems playing video in Winamp (the movie I am trying to play is an AVI - not sure if other formats work). I have installed the K-Lite Codec Pack, and the video does work in Winamp Classic. I can also play the video in Winamp on another machine (although I can't remember the exact configuration details of that machine - and I don't think they're relevant). There are a few symptoms: The content of the Video view is either empty, transparent, or displays rendering from other programs. Opening the Visualization view shows the following error: MILKDROP ERROR DirectX initialization failed (GetDeviceCaps). This means that no valid 3D-accelerated display adapter could be found on your computer. If you know this is not the case, it is possible that your graphics subsystem is unstable; please try rebooting your computer and then try to run the plugin again. Otherwise, please install a 3D-accelerated display adapter. Trying to open streams via the SHOUTCast TV plugin shows Error opening video output, and the video does not open. Opening the file with WMC causes the following error (although the movie still plays): Error creating DX9 allocation presenter CreateDevice failed D3DERR_NOTAVAILABLE There are no warnings displayed in Device Manager, although the display adapter is the standard Windows one. Running DxDiag shows no problems (codec for Video listed as XviD 1.1.2 Final). GSpot reports that codecs are installed. System specs: - Windows Server 2008 r2 Standard 64-bit, with latest updates; - .NET 3.5.1 installed; - Winamp v5.6.01 (latest version); - DirectX 11 (Latest version); - K-Lite Codec Pack 7.0.0 (Full); - Machine is HP DC7600 - full specs here. Please comment if there is any more information which will help to diagnose the problem.

  Read the article

• Supermicro X8SIL-F with Enermax Modu82+ 625W PSU booting issue

  - by Richard Whitman

  I am assembling a custom PC. The configuration is below: Motherboard: Supermicro X8SIL-F Processor: Intel Xeon 3430 Power Supply: Enermax Modu82+ 625W. Memory: Kingston KVR1333D3LQ8R9S/8GEC 8GBx1 installed in DimmA1 This power switch: Frozen CPU switch When I turn on the PSU, the motherboard tries to start itself before I even push the power switch. The following happens: The CPU fan rotates like once or twice, and then stops. After 1-2 seconds, the CPU fan tries to rotate again and stops after about one or two rotations. Finally, after another 1-2 seconds, it again starts and this time it rotates for about 3-4 seconds before stopping. If I pull out the Power switch, and turn on the PSU, again the MB turns on itself and the following happens: The CPU fan rotates like once or twice, and then stops. After 1-2 seconds, the CPU fan tries to rotate again and stops after about one or two rotations. Finally, after another 1-2 seconds, it again starts and the system boots properly I am sure there is nothing wrong with any of the components, because I have two sets of identical components (2 MBs, 2 CPUs, 2 PSUs, 2 switches and so on). And both of the systems show the same symptoms. Why is the MB booting up by itself? Why does it fail to boot when the Power Switch is installed? Is something wrong with the type of Power Switch I am using? PS: the power switch is installed correctly, I have double checked the MB manual to make sure its connecting the right pins.

  Read the article

• Android webbrowser returns code 500 for webpage on Nginx webserver

  - by Paxxil

  Hey! I've come to a very weird behavior of a web browser on android mobile phone (I've tried HTC Wildfire and HTC Desire phones). I have a web server with Nginx v0.8.54. When i try to open a web page on the phone it shows me error: The requested item could not be loaded! (Status code: 500) BUT it only happens when I am requesting page through Mobile network. On Wifi it works just fine .... but there is more .... if I stop Nginx and start Apache web server it works just fine on both Mobile network and wifi. I've also tried other mobile network and it is the same behavior. Some server stats: Firewall is OFF Selinux is OFF the web page (using Nginx web server) opens normally on any other browser (IE, FF, Opera, Chrome, Safari) on the laptop or PC Nothing in nginx error.log This is the only entry in access.log when the page is requested: xxx.xxx.xxx.xxx - - [17/Mar/2011:11:19:49 -0500] 200 "GET / HTTP/1.1" 27405 "-" "Mozilla/5.0 (Linux; U; Android 2.2; en-gb; Desire_A8181 Build/FRF91) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1" "-" index.html has only "Hello World" string in it. There is no fishy javascript or anything else. .... but there is even more.... if i open the same page on another server, with the same Nginx build, with the same server and web server configuration.... it opens just fine. if anyone has any idea on what may be going on, i would really appreciate it if you let me know. Thanks! EDIT: i forgot to mention that page opens OK on Iphone and Nokia

  Read the article

• CSS and JS files not being updated, supposedly because of Nginx Caching

  - by Alberto Elias

  I have my web app working with AppCache and I would like that when I modify my html/css/js files, and then update my Cache Manifest, that when the user accesses my web app, they will have an updated version of those files. If I change an HTML file, it works perfectly, but when I change CSS and JS files, the old version is still being used. I've been checking everything out and I think it's related to my nginx configuration. I have a cache.conf file that contains the following: gzip on; gzip_types text/css application/x-javascript text/x-component text/richtext image/svg+xml text/plain text/xsd text/xsl text/xml image/x-icon; location ~ \.(css|js|htc)$ { expires 31536000s; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; } location ~ \.(html|htm|rtf|rtx|svg|svgz|txt|xsd|xsl|xml)$ { expires 3600s; add_header Pragma "public"; add_header Cache-Control "max-age=3600, public, must-revalidate, proxy-revalidate"; } And in default.conf I have my locations. I would like to have this caching working on all locations except one, how could I configure this? I've tried the following and it isn't working: location /dir1/dir2/ { root /var/www/dir1; add_header Pragma "no-cache"; add_header Cache-Control "private"; expires off; } Thanks

  Read the article

• How to connect a Win XP PC and Win 7 PC with a Linksys WRT54G Router to a PPPOE connection ?

  - by ChristianM

  I have two PCs and a WRT56G Router. My provider is a PPPOE connection (username and password). I can connect my Windows 7 easily. Even if I choose Auto or PPPOE on the router's configuration. Maybe because this one had the connection in the first place with the username and password set up. But I can't connect the Windows XP PC. Actually it does connect in a way, but it receives and sents just a few packages. I can actually see in My Network Places how many packages does the Gateway make and it's a big difference. And it won't open any page. How should I set up the router so I can give enough bandwith to the Windows XP PC ? I've seen another problem that I forgot to mention. The router can't connect with the pppoe settings. I don't know why, but with Auto DHCP setting and my Windows 7 connected with pppoe settings works. EDIT2: I've installed Win 7 on the other PC so I won't have any problem of compatibility betwen them. But I still can't connect the router with PPPOE settings to the internet. It looks like this: http://img641.imageshack.us/img641/9780/capturefba.png If you need any other screens or info, please tell me.

  Read the article

• can't ssh from mac to windows (running ssh server on cygwin)

  - by Denise

  I set up an ssh server on a fresh windows 7 machine using the latest version of cygwin. Disabled the firewall. I can ssh into it from itself, from a different windows box (using winssh), and from a linux vm. In spite of that, I tried to ssh in from two different macs, and neither would let me! This is the debug output: OpenSSH_5.1p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to 3dbuild [172.18.4.219] port 22. debug1: Connection established. debug1: identity file /Users/Denise/.ssh/identity type -1 debug1: identity file /Users/Denise/.ssh/id_rsa type 1 debug1: identity file /Users/Denise/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.5 debug1: match: OpenSSH_5.5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '3dbuild' is known and matches the RSA host key. debug1: Found key in /Users/Denise/.ssh/known_hosts:43 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Trying private key: /Users/Denise/.ssh/identity debug1: Offering public key: /Users/Denise/.ssh/id_rsa Connection closed by [ip] It shows the same output, and fails at the same place, whether I have put my public key on the ssh server or not. Any help would be appreciated-- hopefully someone has run into this before?

  Read the article

• What kernel modules are required for wi-fi to work?

  - by Leonid Shevtsov

  My custom-built 2.6.32 kernel cannot connect to any WPA-protected network. The kernel includes (probably?) everything that should be needed for wifi, including IPv4 network support (IPv6 is disabled), the ath5k wireless driver (which is used in the generic Ubuntu 2.6.31 kernel) and all crypto APIs. The card is being detected, however, iwlist scan returns wlan0 Failed to read scan data : Network is down and network-manager log says <info> (wlan0): driver supports SSID scans (scan_capa 0x01). <info> (wlan0): new 802.11 WiFi device (driver: 'ath5k') <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1 <info> (wlan0): now managed <info> (wlan0): device state change: 1 -> 2 (reason 2) <info> (wlan0): bringing up device. <info> (wlan0): preparing device. <info> (wlan0): deactivating device (reason: 2). supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed <info> modem-manager is now available <WARN> default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files <info> Trying to start the supplicant... <info> (wlan0): supplicant manager state: down -> idle <info> (wlan0): device state change: 2 -> 3 (reason 0) <WARN> nm_supplicant_interface_add_cb(): Unexpected supplicant error getting interface: wpa_supplicant couldn't grab this interface. The exact same configuration works with the generic kernel. Is anything except wifi and crypto api needed for wi-fi to work?

  Read the article

• Windows 7 Won't Boot

  - by Vie

  I recently built a new computer, my fifth one. ASUS Maximus III Formula LGA 1156 Intel P55 ATX Motherboard EVGA 01G-P3-1452-TR GeForce GTS 450 Superclocked 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Video Card COOLMAX RM-1000B 1000W ATX psu Intel Core i7-875K lynnfield 2.93GHz LGA 1156 95w Quad-Core unlocked processor G.SKILL Ripjaws Series 16 (4x4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) memory WD VelociRaptor WD3000GLFS 300gb 10000 RPM SATA 3.0Gb/s Hard Drive Sony Optiarc CD/DVD Burner model AD-7261S-0B LightScribe Windows 7 Home Premium 64-bit It gets hung up on the starting windows screen. When I went to install the OS it did the same thing wouldn't go past the windows logo, so I put the new HDD into my old computer and installed windows 7 thinking it was just an installer error. Put the fully installed HDD back into my new machine and it still gets stuck on the starting windows screen. I've tried most everything I've looked up. Disabled USB, Disabled Turbo Boost, Disabled everything that wasn't essential(just about every configuration I can think of), took it apart and put it back together, took all the ram out save one 4g stick(wouldn't even boot when I did this), did a memory scan which came back successful, I don't know what could be wrong. Only thing I can think of is a compatibility issue somewhere, but I've ran over it again and again and I don't know where there would be an issue like that. Need Backup! .<

  Read the article

• ffmpeg conversion problem

  - by user33126

  installed ffmpeg and it shows version and all correctly. but even info ffmpeg command itself shows ffmpeg -i Alice_In_Wonderland.mp4 gives messgae like FFmpeg version 0.5, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --prefix=/usr --libdir=/usr/lib64 --shlibdir=/usr/lib64 --mandir=/usr/share/man --incdir=/usr/include --extra-cflags=-fPIC --enable-libamr-nb --enable-libamr-wb --enable-libdirac --enable-libfaac --enable-libfaad --enable-libmp3lame --enable-libtheora --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared --enable-swscale --enable-x11grab libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 0 / 52.20. 0 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Nov 6 2009 19:11:04, gcc: 4.1.2 20080704 (Red Hat 4.1.2-46) Seems stream 1 codec frame rate differs from container frame rate: 49.93 (9986/200) - 49.92 (599/12) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Alice_In_Wonderland.mp4': Duration: 00:01:39.65, start: 0.000000, bitrate: 542 kb/s Stream #0.0(und): Audio: aac, 44100 Hz, stereo, s16 Stream #0.1(und): Video: h264, yuv420p, 480x270, 49.92 tbr, 24.96 tbn, 49.93 tbc At least one output file must be specified Please tell me whats the problem

  Read the article

• ffmpeg conversion problem

  - by Elamurugan

  installed ffmpeg and it shows version and all correctly. but even info ffmpeg command itself shows ffmpeg -i Alice_In_Wonderland.mp4 gives messgae like FFmpeg version 0.5, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --prefix=/usr --libdir=/usr/lib64 --shlibdir=/usr/lib64 --mandir=/usr/share/man --incdir=/usr/include --extra-cflags=-fPIC --enable-libamr-nb --enable-libamr-wb --enable-libdirac --enable-libfaac --enable-libfaad --enable-libmp3lame --enable-libtheora --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared --enable-swscale --enable-x11grab libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 0 / 52.20. 0 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Nov 6 2009 19:11:04, gcc: 4.1.2 20080704 (Red Hat 4.1.2-46) Seems stream 1 codec frame rate differs from container frame rate: 49.93 (9986/200) - 49.92 (599/12) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Alice_In_Wonderland.mp4': Duration: 00:01:39.65, start: 0.000000, bitrate: 542 kb/s Stream #0.0(und): Audio: aac, 44100 Hz, stereo, s16 Stream #0.1(und): Video: h264, yuv420p, 480x270, 49.92 tbr, 24.96 tbn, 49.93 tbc At least one output file must be specified Please tell me whats the problem

  Read the article

• ClassNotFoundException returned for all plugins

  - by razumny

  I am trying to use a Java applet (any Java Applet), but I always get a messages saying "Error. Click for details". When I do so, the pop-up says: Application Error ClassNotFoundException jreVerification.class When I click the "Details" button, all I see is the following: Java Plug-in 10.7.2.10 Using JRE version 1.7.0_07-b10 Java HotSpot(TM) Client VM User home directory = C:\Users\razumny ---------------------------------------------------- c: clear console window f: finalize objects on finalization queue g: garbage collect h: display this help message l: dump classloader list m: print memory usage o: trigger logging q: hide console r: reload policy configuration s: dump system and deployment properties t: dump thread list v: dump thread stack x: clear classloader cache 0-5: set trace level to <n> ---------------------------------------------------- I am running Windows 7 Professional, and am up to date on patches. The problem occurs in Google Chrome, Mozilla Firefox and Internet Explorer, regardless of what Java Applet I am running. The error I quoted above came from here: http://java.com/en/download/installed.jsp?detect=jre I have attempted the following to rectify the issue: Uninstall and reinstall Java Uninstall Java, reboot, install Java Uninstall Java, delete all registry entries, reboot, install Java In addition, I have run Malware and Virus scans, none of which have shown anything of relevance. At this point, I am at my wit's end, and so, I turn to you.

  Read the article

• How to organise storage for media content such as video and music?

  - by thor

  Currently, we have a single server hosting all content: music, video and software. This content is downloaded by users through HTTP. Now free space is coming to an end and we are exploring different ways of extending our storage capacity. We want to do it cheap, simple and reliable (protected from disk/ server faults). Currenly, we see two ways: Add a couple of cheap servers with 4 disks (RAID1 ?), run some distributed file-system on top, like GlusterFS. Pros: hopefully, we will see all our disks as single flat file system, just dump content into it and be done. Cons: could be tricky in configuration and handling of faults. Add a couple of cheap servers, all running HTTP servers. Each piece of content (be it a music file or video) is placed on randomly selected two servers. Pros: don't have to deal with RAID, as content is duplicated; single server failure does not bring down any part of content; doubled distribution capacity (as any signle file could be downloaded from any of two servers hosting it). Cons: requires some scripting on part of distribution of content, adding/ removing servers. Do we miss any other ways? Which of the aforementioned options seems to be the best?

  Read the article

• Celery daemon as a Ubuntu service does not consume tasks while running from terminal does

  - by Guy

  On Ubuntu 11.10, I have to issue python tasks from django using celery. I'm currently testing on the same machine but eventually the celery worker should run on a remote machine. django uses the following settings: BROKER_HOST = "127.0.0.1" BROKER_PORT = 5672 BROKER_VHOST = "/my_vhost" BROKER_USER = "celery" BROKER_PASSWORD = "celery" I can also see my task queued in http://localhost:55672/#/queues the celery daemon uses the following configuration (celeryconfig.py): BROKER_HOST = "127.0.0.1" BROKER_PORT = 5672 BROKER_USER = "celery" BROKER_PASSWORD = "celery" BROKER_VHOST = "/my_vhost" CELERY_RESULT_BACKEND = "amqp" import os import sys sys.path.append(os.getcwd()) CELERY_IMPORTS = ("tasks", ) running celeryd -l info works well and now I want to run it as a service. I've followed the instructions from http://ask.github.com/celery/cookbook/daemonizing.html and now I'm trying to run it using: sudo /etc/init.d/celeryd start But the message is not being consumed, no error in the celery log either. /etc/default/celeryd CELERYD_NODES="w1" CELERYD_CHDIR="/path/to/django/project" CELERYD_OPTS="--time-limit=300 --concurrency=1" CELERY_CONFIG_MODULE="celeryconfig" # %n will be replaced with the nodename. CELERYD_LOG_FILE="/var/log/celery/%n.log" CELERYD_PID_FILE="/var/run/celery/%n.pid" # Workers should run as an unprivileged user. CELERYD_USER="celery" CELERYD_GROUP="celery" I've also created user celery in Ubuntu not sure if its necessary. Any help will be appreciated, Thanks, Guy

  Read the article

• How important is dual-gigabit lan for a super user's home NAS?

  - by Andrew

  Long story short: I'm building my own home server based on Ubuntu with 4 drives in RAID 10. Its primary purpose will be NAS and backup. Would I be making a terrible mistake by building a NAS Server with a single Gigabit NIC? Long story long: I know the absolute max I can get out of a single Gigabit port is 125MB/s, and I want this NAS to be able to handle up to 6 computers accessing files simultaneously, with up to two of them streaming video. With Ubuntu NIC-bonding and the performance of RAID 10, I can theoretically double my throughput and achieve 250MB/s (ok, not really, but it would be faster). The drives have an average read throughput of 83.87MB/s according to Tom's Hardware. The unit itself will be based on the Chenbro ES34069-BK-180 case. With my current hardware choices, it'll have this motherboard with a Core i3 CPU and 8GB of RAM. Overkill, I know, but this server will be doing other things as well (like transcoding video). Unfortunately, the only Mini-ITX boards I can find with dual-gigabit and 6 SATA ports are Intel Atom-based, and I need more processing power than an Atom has to offer. I would love to find a board with 6 SATA ports and two Gigabit LAN ports that supports a Core i3 CPU. So far, my search has come up empty. Thus, my dilemma. Should I hold out for such a board, go with an Atom-based solution, or stick with my current single-gigabit configuration? I know there are consumer NAS units with just one gigabit interface (probably most of them), but I think I will demand a lot more from my server than the average home user. Any advice is appreciated. Thanks.

  Read the article

• will heavy network traffic affect other connections on HP ProCurve V1810-48G?

  - by nn4l

  I have a HP ProCurve V1810-48G switch with a few servers connected to it (everything in one rack). The switch is practically in its default configuration. During copying of a few hundred GByte of data from server_a to server_b (using tar cf - data | ssh server_b 'cd myhome; tar xf -'), essentially saturating the network capacity between those two servers, I noticed network related error messages on the console of server_c - as if server_c is no longer able to send/receive traffic to server_d. After canceling the copy command everything was normal again. I would understand this if the network connection would use a shared resource, for example if server_a and server_c are in one datacenter, server_b and server_d are in another datacenter and both datacenters are connected with a 100 MBit line. But all of the mentioned servers are connected to the same switch and are located in the same IP network. I always thought that a connection between two servers on one switch will not affect any other server connected to the switch. It is also possible that the network related error messages are caused by something else - but I can't risk a network problem for any other system on this switch. Please advise.

  Read the article

• Apache directory authorization bug (clicking cancel gives acces to partial content)

  - by s4uadmin

  I got a minor problem (as the site is not high priority) but still a very interesting one. I have an apache root domain wherein other sites live "/var/www/" And I have foo.example.com forwarding to "/var/www/foo-example" (wordpress site) The problem here is that when you go to foo.example.com you are prompted to enter credentials. If you hit cancel it gives you the access denied page. But when you go to the servers' direct IP (this gives you the default index page) and hit cancel when prompted for credentials it just keeps giving you the login screen, and after pressing cancel a few times more it gives (a perhaps cached) bare html part of the page. How do I prevent this from happening? Perhaps this is a bug... Even if I would block access to the root directory when going to the ip/foo-example it would still do this. And I want to keep all the directories within the www directory or at least all in the same. Thanks PS: here is my configuration: <VirtualHost *:80> DocumentRoot /var/www/wp-xxxxxxx/ ServerName beta.xxxxxxxxx.nl <Directory "/var/www/wp-xxxxxxxxx/"> Options +Indexes AuthName "xxxxxxxx Beta Site" AuthType Basic require valid-user Satisfy all AuthBasicProvider file AuthUserFile /var/www/wp-xxxxxxx/.htxxxxxxxxx order deny,allow allow from all </Directory> ServerAdmin [email protected] ServerAlias beta.xxxxxxx.nl </VirtualHost>

  Read the article

• Postfix "mail-to-script" pipe only delivers empty messages

  - by user68202

  i have a problem here. I want that a incoming email is piped to a php script in the system through postfix. My System is running with ispconfig 3, postfix and dovecot (< virtual mailbox users are saved in mysql). I looked already into this one: How to configure postfix to pipe all incoming email to a script? ... the script is executed, but no "message" is delivered to the script. My setup so far: In ISPConfig 3 i have set up the following email route: Active Server Domain Transport Sort by Yes example.com pipe.example.com piper: 5 excerpt from my postfix master.cf: piper unix - n n - - pipe user=piper:piper directory=/home/piper argv=php -q /home/piper/mail.php so far it is working great (mail sent to [email protected]) (mail.log): Jun 21 16:07:11 example postfix/pipe[10948]: 235CF7613E2: to=<[email protected]>, relay=piper, delay=0.04, delays=0.01/0.01/0/0.02, dsn=2.0.0, status=sent (delivered via piper service) ... and no errors in mail.err the mail.php is sucessfully executed (its chmod 777 and chown'ed to piper), but creates a empty .txt file (normally it should contain the email message): -rw------- 1 piper piper 0 Jun 21 16:07 mailtext_1340287631.txt the mail.php script ive used, is the one from http://www.email2php.com/HowItWorks if i use their (commercial) service to pipe an email to the mail.php (in a apache2 environment) through a provided "pipe-email", the message is saved sucessfully and complete. But as you can see, i dont want to use external services. -rw-r--r-- 1 web2 client0 1959 Jun 21 16:19 mailtext_1340288377.txt So, whats wrong here? I think it has something to do with the "delivering configuration" in my system...

  Read the article

< Previous Page | 489 490 491 492 493 494 495 496 497 498 499 500  | Next Page >