Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 494/609 | < Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >

• SBS 2008 R2: Did something change with anonymous relays?

  - by gravyface

  Have noticed that prior documentation on setting up anonymous relays in SBS 2008 no longer work without some additional configuration. Used to be able to follow this documentation, which is basically: setup a new receive connector add the IP address(es) that will be permitted to relay check off "anonymous" under Permission Group and then run the Exchange shell script to grant permissions. Now what seems to be happening is that if the permitted IP address happens to fall within the same address space as another more restrictive Receive Connector (like the "Default SBS08" one) and possibly if it's ahead of the new Receive Connector alphabetically (haven't tested that yet), the relay attempt fails with "Client Was Not Authenticated" error. To get it to work, I had to modify the scope of the "Default SBS08" Receive Connector to exclude the one LAN IP that I wanted to allow relaying for. I can't recall ever having to do this for Exchange 2007 Standard and/or any other SBS 2008 servers I've setup over the last couple of years and I don't remember doing this and the wiki entry I added at the office doesn't mention it either. So my question is, has anyone else experienced this? Has there been a new change with R2 or perhaps an Exchange Service Pack?

  Read the article

• How can I get ffmpeg to convert a .mov to a .gif?

  - by user29336

  I'm trying to convert a .mov to a .gif and I'm not having success. Here's the error: ffmpeg -pix_fmt rgb24 -i yesbuddy.mov output.gif ffmpeg version 0.11.1 Copyright (c) 2000-2012 the FFmpeg developers built on Jun 12 2012 17:47:34 with clang 2.1 (tags/Apple/clang-163.7.1) configuration: --prefix=/usr/local/Cellar/ffmpeg/0.11.1 --enable-shared --enable-gpl --enable-version3 --enable-nonfree --enable-hardcoded-tables --enable-libfreetype --cc=/usr/bin/clang --enable-libx264 --enable-libfaac --enable-libmp3lame --enable-librtmp --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libxvid --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libass --enable-libvo-aacenc --disable-ffplay libavutil 51. 54.100 / 51. 54.100 libavcodec 54. 23.100 / 54. 23.100 libavformat 54. 6.100 / 54. 6.100 libavdevice 54. 0.100 / 54. 0.100 libavfilter 2. 77.100 / 2. 77.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 15.100 / 0. 15.100 libpostproc 52. 0.100 / 52. 0.100 Option pixel_format not found. If I leave out the -pix_fmt rgb24 part it complains. Thoughts on how to fix?

  Read the article

• Software/hardware to build video streaming server?

  - by Sasha Yanovets

  I am looking for a video streaming server solution, something like online TV server, with ability to make live broadcasts in the internet. What software could you recommend for that? What kind of hardware it should run on, should be there anything special? I am looking for a solution that could be scaled up to at least 1000 simultaneous users online with good resolution of video. I think it is good to have general answer on what direction to choose. But here more details on my specific case: I just looking for a solution almost from scratch. We have some video content that we've produced, but it is not delivered over internet yet. We do not tied to any particular vendor for now. We want to make 24 hours of steaming three 8 hour blocks with change of content every day. We want the ability to make regular live broadcasts. I guess we will need to have several options of streaming quality (low ~56 kb/s mid ~273 kb/s). Some terms just foreign to me (like play-truncation rate), if you could point out what parameters we should avare of, it would be great. Uplink to the internet is to be determined. We plan to start from something and scale up on the way. If you are already have some kind of media streaming server, just describe its configuration here (hardware, OS, software), peak number of concurrent users it serves. I think it could help people approaching this task.

  Read the article

• Exchange 2010 update timezone of all calendar items

  - by Andrew

  We are currently operating Exchange 2010 server with Outlook 2010 clients on a ship. We have just changed timezones for the first time in quite a while today. Is there any way to rebase all the calendars and/or update all the calendar items to the new timezone at the same time? I have looked at the following tools already. Microsoft Exchange Calendar Update Configuration Tool - http://www.microsoft.com/en-us/download/details.aspx?id=6266 (Doesn't support exchange 2010) Time Zone Data Update Tool for Microsoft Office Outlook - http://www.microsoft.com/en-us/download/details.aspx?id=17291 The Time Zone Data Update Tool for Microsoft Office Outlook does work for individual users, but has some serious downsides. Including each user needs to run it (approx 400 users), and also it only seems to work on the default account in Outlook 2010, a lot of our users have role accounts as well that we would need to run the tool on. The only way I can find to get this tool to run on the role accounts is to make the role account the default account in outlook, and that in itself is quiet an involved process especially if you have 2 or 3 role accounts. So is there a way to just change all calendar items on our Exchange server to a different timezone in one go? We are a little unique in terms of the whole organisation can change timezones over night, meeting rooms and all, but surely a product as advanced as Exchange 2010 allows us to do what we need.

  Read the article

• What could be wrong with my VLAN?

  - by Matt

  I've got a VLAN 10 setup as a management VLAN. The management VLAN comes off port 48 and links to another set of switches that do not support VLAN's so it was I believe set up as an untagged access port. In the past this was a different brand of switch and this worked fine. However, since changing to the HP V1910-48G series I can't seem to get this working. I must point out that as far as I'm aware it is wired up properly (I can't check this physically as I'm working remote and have asked the tech who's got access to double check for me). Now I don't have a huge amount of experience with VLAN environments but AFAIK this is right. I've set the port 48 (linked to the management switches) as an untagged port with PVID 10 and access link type. Is this all I'd need to do from a configuration perspective to ensure all devices connected to port 48 would end up being on VLAN 10 and not needing to tag their frames. i.e. the tag would be added by the switch before being forwarded.

  Read the article

• Having two IP Routes/Gateways of last Resort on an HP Switch

  - by SteadH

  We have an HP Layer 3 Switch that is doing IP routing between vlans. The general set up is that the switch has an IP address on each VLAN and IP routing is enabled. On our servers VLAN, we have a firewall that has a connection to the outside world. To set a IP route on the HP router, we use IOS command ip route 0.0.0.0 0.0.0.0 192.168.2.1 where 192.168.2.1 is the address of our firewall, and the zeros essentially mean to route all traffic that the switch doesn't know what to do with out the firewall as a gateway. We're in the middle of an ISP and firewall change. I set up the new firewall and ran the IOS command ip route 0.0.0.0 0.0.0.0 192.168.2.254 (the address of the new firewall). Things started working nicely. When I reviewed the configuration of the switch though, I noticed that it did not replace the previous ip route command, but just added another route. Now, I know how to remove the old firewall route (no ip route 0.0.0.0 0.0.0.0 192.168.2.1), but what is the effect of having these two 0.0.0.0 routes? Is it switch implosion? Will a server just respond back over the route it receives the request from? I've read elsewhere that having two default gateways is an impossibility by definition, but I'm curious about this situation that our switch allowed. Thanks!

  Read the article

• Serving images from another hostname vs Apache overload for the rewrites

  - by luison

  We are trying to improve further the speed of some sites with older HTML in order as well to obtain better SEO results. We have now applied some minify measures, combined html, css etc. We use a small virtualized infrastructure and we've always wanted to use a light + standar http server configuration so the first one can serve images and static contents vs the other one php, rewrites, etc. We can easily do that now with a VM using the same files and conf of vhosts (bind mounts) on apache but with hardly any modules loaded. This means the light httpd will have smaller fingerprint that would allow us to serve more and quicker, have more minSpareServer running, etc. So, as browsers benefit from loading static content from different hostnames as well, we've thought about building a rewrite rule on our main server (main.com) to "redirect" all images and css *.jpg, *.gif, *.css etc to the same at say cdn.main.com thus the browser being able to have more connections. The question is, assuming we have a very complex rewrite ruleset already (we manually manipulate many old URLs for SEO) will it be worth? I mean will the additional load of main's apache to have to redirect main.com/image.jpg (I understand we'll have to do a 301) to cdn.main.com/image.jpg + then cdn.main.com having to serve it, be larger than the gain we would be archiving on the browser? Could the excess of 301s of all images on a page be penalized by google? How do large companies work this out, does the original code already include images linked from the cdn with absolute paths?

  Read the article

• How to turn off Windows Azure's "This copy of Windows is not genuine" message?

  - by Sid

  Is there any setting/configuration item to avoid Windows Azure from printing that error on the screen or detecting it? I've put a screenshot below that shows the message when you RDP into the web role. My web role runs on Windows Azure Guest OS 1.17 (variant of Windows Server 2008 SP2) Background: I was explaining our architecture to some outside engineers (NDA'd and all) and had to demystify the webrole as they were unfamiliar with Azure. I RDP'd into the VMs running the Web Role when one of their engineers gasped "are you guys running pirated copies of Windows in the cloud?" I also noticed that within the RDP screen, the Azure machines had "This copy of Windows is not genuine" on the bottom left corner. Now obviously, Microsoft is running their own OS in their own datacenter with no influence from me. So no 'piracy' here, despite that obvious warning. However, they seemed so distracted by this ("how can it be? really? hmmm?") that we wasted more time talking about it than the actual matter at work. Like I said, they have little exposure to Azure but have value add elsewhere. I want to get rid of this so I don't have to explain this in the future. PS Microsoft: If you're going to modify Windows Server <XYZ> into Windows Azure <A.B> , you should also modify the code that verifies product integrity.

  Read the article

• How to set a static route for an external IP address

  - by HorusKol

  Further to my earlier question about bridging different subnets - I now need to route requests for one particular IP address differently to all other traffic. I have the following routing in my iptables on our router: # Allow established connections, and those !not! coming from the public interface # eth0 = public interface # eth1 = private interface #1 (10.1.1.0/24) # eth2 = private interface #2 (129.2.2.0/25) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -m state --state NEW ! -i eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth0 -o eth2 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow outgoing connections from the private interfaces iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -A FORWARD -i eth2 -o eth0 -j ACCEPT # Allow the two private connections to talk to each other iptables -A FORWARD -i eth1 -o eth2 -j ACCEPT iptables -A FORWARD -i eth2 -o eth1 -j ACCEPT # Masquerade (NAT) iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Don't forward any other traffic from the public to the private iptables -A FORWARD -i eth0 -o eth1 -j REJECT iptables -A FORWARD -i eth0 -o eth2 -j REJECT This configuration means that users will be forwarded through a modem/router with a public address - this is all well and good for most purposes, and in the main it doesn't matter that all computers are hidden behind the one public IP. However, some users need to be able to access a proxy at 192.111.222.111:8080 - and the proxy needs to identify this traffic as coming through a gateway at 129.2.2.126 - it won't respond otherwise. I tried adding a static route on our local gateway with: route add -host 192.111.222.111 gw 129.2.2.126 dev eth2 I can successfully ping 192.111.222.111 from the router. When I trace the route, it lists the 129.2.2.126 gateway, but I just get * on each of the following hops (I think this makes sense since this is just a web-proxy and requires authentication). When I try to ping this address from a host on the 129.2.2.0/25 network it fails. Should I do this in the iptables chain instead? How would I configure this routing?

  Read the article

• nginx giving of 404 when using set in an if-block

  - by ba

  I've just started using nginx and I'm now trying to make it play nice with the Wordpress plugin WP-SuperCache which adds static files of my blog posts. To serve the static file I need to make sure that some cookies aren't set, that it's not a POST-request and making sure the cached/static file exist. I found this guide and it seems like a good fit. But I've noticed that as soon as I try to set something inside an if my site starta giving 404s on an URL that isn't rewritten. The location block of the configuration: location /blog { index index.php; set $supercache_file ''; set $supercache_ok 1; if ($request_method = POST) { set $supercache_ok 0; } if ($http_cookie ~* "(comment_author_|wordpress|wp-postpass_)") { set $supercache_ok '0'; } if ($supercache_ok = '1') { set $supercache_file '$document_root/blog/wp-content/cache/supercache/$http_host/$1/index.html.gz'; } if (-f $supercache_file) { rewrite ^(.*)$ $supercache_file break; } try_files $uri $uri/ @wordpress; } The above doesn't work, and if I remove all the ifs above and add if ($http_host = 'mydomain.tld') { set $supercache_ok = 1; } and then I get the exact same message in the errors.log. Namely: 2010/05/12 19:53:39 [error] 15977#0: *84 "/home/ba/www/domain.tld/blog/2010/05/blogpost/index.php" is not found (2: No such file or directory), client: <ip>, server: domain.tld, request: "GET /blog/2010/05/blogpost/ HTTP/1.1", host: "domain.tld", referrer: "http://domain.tld/blog/" Remove the if and everything works as it should. I'm stymied, no idea at all where I should start searching. =/ ba@cell: ~> nginx -v nginx version: nginx/0.7.65

  Read the article

• G4 server running slow

  - by Abby Kach

  I have HP proliant ML 350 servers. We have 8 remote locations where users connect and log on to our server through DYNDNS to access our company ERP's to conduct day to day work. The base of our company ERP's is oracle for which we have a separate server.Now the problem is day by day the load on the server is increasing and the speed is getting slower and slower and users are facing a lot of issues . so I are planning to implement Sonic wall VPN. I conducted a demo of sonic wall but it was slower than the current speed of dyndns. the configuration of my server is as follows :- Linux HP ProLiant 370 Intel Xenon 3.20 GHZ 150 GB (72 * 2) 3 GB Suse Omega HP ProLiant 370 Intel Xenon 3.20 GHZ 300GB (72.8 * 4) Raid 5 4 GB Windows Server 2K3 Enterprise Edition Storage Box HP Storage Works 1400 Intel Xenon 2.00 GHZ 4 TB(1 TB * 4) Raid 5 2 GB Windows Server 2K8 Enterprise Edition Domain & Terminal HP ProLiant 350 Intel Xenon 3.20 GHZ 250 GB(72.8 * 3) Raid 5 4 GB Windows Server 2K3 Enterprise Edition Can some one help me as to how can i speed up my network at remote locations and reduce the problems of speed etc..

  Read the article

• Why is ssh agent forwarding not working?

  - by J. Pablo Fernández

  In my own computer, running MacOSX, I have this in ~/.ssh/config Host * ForwardAgent yes Host b1 ForwardAgent yes b1 is a virtual machine running Ubuntu 12.04. I ssh to it like this: ssh pupeno@b1 and I get logged in without being asked for a password because I already copied my public key. Due to forwarding, I should be able to ssh to pupeno@b1 from b1 and it should work, without asking me for a password, but it doesn't. It asks me for a password. What am I missing? This is the verbose output of the second ssh: pupeno@b1:~$ ssh -v pupeno@b1 OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to b1 [127.0.1.1] port 22. debug1: Connection established. debug1: identity file /home/pupeno/.ssh/id_rsa type -1 debug1: identity file /home/pupeno/.ssh/id_rsa-cert type -1 debug1: identity file /home/pupeno/.ssh/id_dsa type -1 debug1: identity file /home/pupeno/.ssh/id_dsa-cert type -1 debug1: identity file /home/pupeno/.ssh/id_ecdsa type -1 debug1: identity file /home/pupeno/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA 35:c0:7f:24:43:06:df:a0:bc:a7:34:4b:da:ff:66:eb debug1: Host 'b1' is known and matches the ECDSA host key. debug1: Found key in /home/pupeno/.ssh/known_hosts:1 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /home/pupeno/.ssh/id_rsa debug1: Trying private key: /home/pupeno/.ssh/id_dsa debug1: Trying private key: /home/pupeno/.ssh/id_ecdsa debug1: Next authentication method: password pupeno@b1's password:

  Read the article

• How to limit reverse SSH tunelling ports?

  - by funktku

  We have a public server which accepts SSH connections from multiple clients behind firewalls. Each of these clients create a Reverse SSH tunnel by using the ssh -R command from their web servers at port 80 to our public server. The destination port(at the client side) of the Reverse SSH Tunnel is 80 and the source port(at public server side) depends on the user. We are planning on maintaining a map of port addresses for each user. For example, client A would tunnel their web server at port 80 to our port 8000; client B from 80 to 8001; client C from 80 to 8002. Client A: ssh -R 8000:internal.webserver:80 clienta@publicserver Client B: ssh -R 8001:internal.webserver:80 clientb@publicserver Client C: ssh -R 8002:internal.webserver:80 clientc@publicserver Basically, what we are trying to do is bind each user with a port and not allow them to tunnel to any other ports. If we were using the forward tunneling feature of SSH with ssh -L, we could permit which port to be tunneled by using the permitopen=host:port configuration. However, there is no equivalent for reverse SSH tunnel. Is there a way of restricting reverse tunneling ports per user?

  Read the article

• Scenario - NTFS Symbolic Link or Junction?

  - by Unsigned

  Differences Absolute Relative File Directory UNC Symbolic link ? ? ? ? ? Junction ? x x ? x Scenario Let's assume we're creating a reparse point to create the redirect C:\SomeDir => D:\SomeDir Since this scenario only requires local, absolute paths, either a junction or symlink would work. In this situation, is there any advantage to using one or the other? Assume Windows 7 for the OS, disregarding backward-compatibility (prior to Vista, symlinks are not supported). Update I have found another difference. Symbolic Link - Link's permissions only affect delete/rename operations on the link itself, read/write access (to the target) is governed by the target's permissions Junction - Junction's permissions affect enumeration, revoking permissions on the junction will deny file listing through that junction, even if the target folder has more permissive ACLs The permissions make it interesting, as symlinks can allow legacy applications to access configuration files in UAC-restricted areas (such as %ProgramFiles%) without changing existing access permissions, by storing the files in a non-restricted location and creating symlinks in the restricted directory.

  Read the article

• How To Boot with "mem=1024m" Argument using GRUB - Ubuntu 10.04

  - by nicorellius

  I am still working on this question. This new one is a different question so I thought it would be good to post a new question. Is this the proper protocol or should I have just edited the other question? I'm running Ubuntu 10.04 with the kernel 2.6.32-22-generic on a Toshiba Satellite laptop. When I enter the GRUB menu (I have Ubuntu 9.10 installed as well), I can choose which kernel to boot. I use scroll down to the one I want and press "e" and I expect to be able to enter mem=1024m and force the kernel to use this much memory. But when I run cat /proc/meminfo or look in the process manager after booting wth this argument I still see all the RAM: ~2 GB. Am I using this boot argument incorrectly? The boot configuration (before I add anything) looks like this: insmod ext2 set root=(hd0,1) search --no-floppy --fs-uuid --set 10270f21-1c42-494b-bd3f-813c23f6d\ 518 linux /boot/vmlinuz-2.6.32-22-generic root=UUID=10270f21-1c42-494b-b\ d3f-813c23f6d518 ro quiet splash initrd /boot/initrd.img-2.6.32-22-generic The way I did this was that I added the mem=1024m after the last line and pressed Ctrl+x (Emacs save and boot the kernel) and the system booted. I tried adding mem=1024m to the end and the beginning of this list and it appeared to not change the RAM allocation.

  Read the article

• ddwrt client brigde acces point lost

  - by llazzaro

  Ok I have an AP with ddwrt firm (i know its not the best, but continue reading!) AP is configured to work like a wifi "transparent" brigde, also it had a virtual wifi network card to expand radius of wifi signal in that same AP. The brigde is working, computers behind AP gets ips from main routers which shares internet....BUT! I cant access webgui of the bridge AP... Main problem : AP is lost, but its working as brigde. I cant find it in the network (it didnt have any ip!) so I cant change any configuration... First solution : Reset AP, but it cannot be done. Reset button dont works due to a bug in ddwrt micro firm that mi linksys WAP54g had installed (I really hate this firmware I like more openwrt that my main router has) Second Solution : arp -a from main router , from computers behind AP...It dont appears in the list. Any more ideas, the router at some level must be there, the brigde is working. I know its possible that the AP is with an ip like 192.168.100.2 , my subnect actually is 172.16.X.X. :) thanks!

  Read the article

• Reusing slot numbers in Linux software RAID arrays

  - by thkala

  When a hard disk drive in one of my Linux machines failed, I took the opportunity to migrate from RAID5 to a 6-disk software RAID6 array. At the time of the migration I did not have all 6 drives - more specifically the fourth and fifth (slots 3 and 4) drives were already in use in the originating array, so I created the RAID6 array with a couple of missing devices. I now need to add those drives in those empty slots. Using mdadm --add does result in a proper RAID6 configuration, with one glitch - the new drives are placed in new slots, which results in this /proc/mdstat snippet: ... md0 : active raid6 sde1[7] sdd1[6] sda1[0] sdf1[5] sdc1[2] sdb1[1] 25185536 blocks super 1.0 level 6, 64k chunk, algorithm 2 [6/6] [UUUUUU] ... mdadm -E verifies that the actual slot numbers in the device superblocks are correct, yet the numbers shown in /proc/mdstat are still weird. I would like to fix this glitch, both to satisfy my inner perfectionist and to avoid any potential sources of future confusion in a crisis. Is there a way to specify which slot a new device should occupy in a RAID array? UPDATE: I have verified that the slot number persists in the component device superblock. For the version 1.0 superblocks that I am using that would be the dev_number field as defined in include/linux/raid/md_p.h of the Linux kernel source. I am now considering direct modification of said field to change the slot number - I don't suppose there is some standard way to manipulate the RAID superblock?

  Read the article

• Can not boot windows XP from cloned hard disk - what can I do?

  - by Martin

  My configuration: a PC (some years old) with MSI K8N-Neo-4F Motherboard, 1 GB RAM. Disk 1 (Maxtor, SATA II, 250 GB): 2 Partitions, on Partition 1 (48 GB): Windows XP Professional (NTFS) on Partition 2 (190 GB): data (NTFS) I wanted to have a larger and faster disk (the PC is incredibly slow and permanently the disk is rattling when I try to open an application or during Windows startup), so I took Disk 2 (Seagate, Sata II, 500 GB), installed in the PC, created at first a 400 GB-partition at the end of the disk and cloned the data to it, which worked well Installed a swap partition and a partition for Ubuntu Linux 12.10 on the first "part" of the disk so I was able to boot Linux and the old Windows XP with the Linux "System selection" at startup. Now I wanted to move Windows XP to the new disk, deleted the Linux partitions cloned Windows XP to the new disk (with free tools - EASESUS), left both disks in the PC and tried to select the new hard drive during boot as boot partition. This did not work, the PC refused to boot from this second disk. I tried many things like making the boot partition on the 2nd drive "active" in the Windows System Preferences modifying the boot.ini file to boot from the second disk - tried to boot from it, but ended with an error message stating that it was not possible to boot from this disk because of a hardware failure or something else or so removing the original disk and plugging the new one on the same SATA port as the original one - also booting failed with an error message repairing the MBR by booting into recovery mode from the Windows XP Installation CD-ROM, selecting the second disk and doing "FIXMBR" which said that everything was fine with the MBR. after that at least the PC tried to boot from the newer disk and then startup was hanging during the blue screen with the Windows Logo.... no luck. ... deleting the cloned partition and cloning again - this time with Macrium Reflect Free version... - no success during booting. I tried a lot of things with no success, so I wonder what I am doing wrong?! What could I do to successfully clone my Win XP partition to replace the original disk by a larger one which is bootable.

  Read the article

• Backup data from RAID 1 disk out of its server

  - by Doomsday

  I'm facing with a pretty easy problem in my opinion. I've extracted a working disk from a RAID1 and I'm looking to copy only data (FS and RAID configuration doesn't matter) into another location (another FS). My problem is I'm not able to mount properly this disk into another linux. I've first looked the partition table : # fdisk -l /dev/sdc Disk /dev/sdc: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 63 1249535699 624767818+ fd Linux raid autodetect /dev/sdc2 1249535700 1250017649 240975 fd Linux raid autodetect /dev/sdc3 1250017650 1250258624 120487+ 82 Linux swap / Solaris I've understood I should use dmraid tools. Once installed : # cat /proc/mdstat Personalities : md0 : inactive sdc1[1](S) 624767744 blocks unused devices: <none> And some other informations : # mdadm --examine /dev/sdc1 /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 8f292f54:7e5aef72:7e5ab5fd:b348fd05 Creation Time : Mon Jun 2 03:39:41 2008 Raid Level : raid1 Used Dev Size : 624767744 (595.82 GiB 639.76 GB) Array Size : 624767744 (595.82 GiB 639.76 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Update Time : Tue Feb 7 22:34:59 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : a505b324 - correct Events : 15148 Number Major Minor RaidDevice State this 1 8 1 1 active sync /dev/sda1 0 0 8 17 0 active sync /dev/sdb1 1 1 8 1 1 active sync /dev/sda1 From here, I've tried to mount but I'm not comfortable with dmtools and how it's working. # mount /dev/sdc1 /mnt/sdc1 mount: unknown filesystem type 'linux_raid_member' # mount /dev/md0 /mnt/sdc1 mount: /dev/md0: can't read superblock I've seen some options to alter RAID array with mdadm but I only want to copy data on its filesystem before wiping them... Anyone has a clue ?

  Read the article

• How do I find the cause for a huge difference in performance between two identical Ubuntu servers?

  - by the.duckman

  I am running two Dell R410 servers in the same rack of a data center. Both have the same hardware configuration, run Ubuntu 10.4, have the same packages installed and run the same Java web servers. No other load. One of them is 20-30% faster than the other, very consistently. I used dstat to figure out, if there are more context switches, IO, swapping or anything, but I see no reason for the difference. With the same workload, (no swapping, virtually no IO), the cpu usage and load is higher on one server. So the difference appears to be mainly CPU bound, but while a simple cpu benchmark using sysbench (with all other load turned off) did yield a difference, it was only 6%. So maybe it is not only CPU but also memory performance. I tried to figure out if the BIOS settings differ in some parameter, did a dump using dmidecode, but that yielded no difference. I compared /proc/cpuinfo, no difference. I compared the output of cpufreq-info, no difference. I am lost. What can I do, to figure out, what is going on?

  Read the article

• What Windows app can sort a huge XML file?

  - by Torben Gundtofte-Bruun

  I have some enormous XML-based configuration files, with 125000 lines in them. The problem is that they are auto-generated by the system I use, and "child" tags are in a random order within their respective parent tag. This means that a diff comparison is impossible. I want to recursively sort all tags within a parent tag by the value in name="". Some parent tags only appear once and don't have a name="" parameter; these should be sorted by the tag name itself. Once the files are sorted like this, they can be compared quite easily using normal tools. We are currently using ExamXML which can match unsorted XML files, but it fails because the files are too big. Is there an application that can do this? (Windows much preferred; Linux only as a last resort) I do not want to dive into development or XSLT jobs. I am thinking that someone must have made a simple sorting tool like this already - I just can't find it using Google. Update: With help from this site, I created a small package that I want to share: XML-Sorter_v0.3.zip Update: Follow-up question here.

  Read the article

• NGINX returning 404 error on a valid url

  - by Harrison

  We have a site that runs PHP-FPM and NGINX. The application sends invitations to site members that are keyed with 40 character random strings (alphanumerics only -- example below). Today for the first time we ran into an issue with this approach. The following url: http://oursite.com/notices/response/approve/1960/OzH0pedV3rJhefFlMezDuoOQSomlUVdhJUliAhjS is returning a 404 error. This url format has been working for 6 months now without an issue, and other urls following this exact format continue to resolve properly. We have a very basic config with a simple redirect to a front controller, and everything else has been running fine for a while now. Also, if we change the last character from an "S" to anything other than a lower-case "s", no 404 error and the site handles the request properly, so I'm wondering if there's some security module that might see something wrong with this specific string... Not sure if that makes any sense. We are not sure where to look to find out what specifically is causing the issue, so any direction would be greatly appreciated. Thanks! Update: Adding a slash to the end of the url allowed it to be handled properly... Would still like to get to the bottom of the issue though. Solved: The problem was caused by part of my configuration... Realized I should have posted, but was headed out of town and didn't have a chance. Any url that ended in say "css" or "js" and not necessarily preceded by a dot (so, for example, http://site.com/response/somerandomestringcss ) was interpreted as a request for a file and the request was not routed through the front controller. The problem was my regex for disabling logging and setting expiration headers on jpgs, gifs, icos, etc. I replaced this: location ~* ^.+(jpg|jpeg|gif|css|png|js|ico)$ { with this: location ~* \.(jpg|jpeg|gif|css|png|js|ico)$ { And now urls ending in css, js, png, etc, are properly routed through the front controller. Hopefully that helps someone else out.

  Read the article

• 2012 R2 services will not start after promotion to Domain Controller

  - by Cybersylum

  Having a peculiar issue promoting a Windows 2012 R2 server in a domain at 2003 domain/forest functional level. Built a new 2012 R2 server, added the following software (labtech, appassure, eset A/V, & Teamviewer). It activated and appeared to be working fine. I added the Active Directory Domain Services role, and completed the configuration (Domain/Forest Prep, and DC promotion). All appeared to go well. I rebooted the server, and that's where the peculiar stuff began. I noticed the server indicated it needed activated again; but would not accept the key. I verified the key was good. That's when I noticed the Software Protection service (as well as many other core services - Base Filtering engine, DHCP client, firewall, etc) would not start. The error message for all of them was "Access Denied". I called MS, and they wanted to troubleshoot at a service level. Their fix was to use procmon and identify the resource that needed permissions (registry key, file or folder) and add "everyone" with full control). That got the services to start; but the problem re-appeared after a reboot. Thinking the issue might have been with the anti-virus package during the promotion process, I rebuilt the DCs from scratch and removed the metadata from AD (as I could not demote the machines "rpc server unavailble"). I tried to promote the newly built machines again. The only changes to the brand new machines being critical updates. Again the promotion appeared to work fine; but upon reboot (and a long wait to allow replication to occur) similar problems began to re-appear. I have verified that the schema updates are correct (schema version is 69 - for Windows 2012 R2). I am not finding much about this issue through my own searches, so I thought I would post this to see if anyone else has seen anything similar...

  Read the article

• PCI Tv Tuner not receiving signal

  - by C-dizzle

  I inherited an Angel II PCI Dual TV Tuner card, popped it into my computer's PCI slot, plugged in my coax cable, but am having trouble getting any type of signal to it. The computer I am using is Windows 7 Ultimate 32 bit, I know the card works because the computer recognizes it and installs the drivers, or at least I assume it works because of that. I'm trying to use Windows Media Center to watch/record tv. Here are a few things I have tried to get it working: Uninstalled/Reinstalled the newest drivers Tried hooking up an antenna to the coax input instead of my cable Instead of using cable splitter, went directly from wall output into card with coax cable Tried using different output on splitter in case the out port was bad I haven't tried a different coax cable yet, it should be fine since it's pretty new. Since this is my first time setting up a TV Tuner card, is there anything specific that I need to do with it? Is there any configuration that needs to be done on it? Do I need to have a digial receiver? I was getting pretty frustrated with it so I wanted to turn here to the experts, I'm sure someone can help me figure it out.

  Read the article

• CPANEL ModSec2 not working with SecFilterSelective

  - by jfreak53

  Ok, I have cPanel/WHM latest on a Dedi, here are my specs on apache: Server version: Apache/2.2.23 (Unix) Server built: Oct 13 2012 19:33:23 Cpanel::Easy::Apache v3.14.13 rev9999 I just ran a re-compile using easyapache as you can see by the date. When running it I made sure that ModSec was selected and it stated in big bold letters something to the effect of If you install Apache 2.2.x you get ModSec 2 So I believed it :) I recompiled, I then ran: grep -i release /home/cpeasyapache/src/modsecurity-apache_2.6.8/apache2/mod_security2.c Hmm, the file is there but grep doesn't output anything, if I run: grep -i release /home/cpeasyapache/src/modsecurity-apache_1.9.5/apache2/mod_security.c I of course get the ModSec 1 version output. But the thing is that ModSec2 is installed since the c file is there. So I continued and put the following in modsec2.user.conf: SecFilterScanOutput On SecFilterSelective OUTPUT "text" Now when I restart Apache I get this error: Syntax error on line 1087 of /usr/local/apache/conf/modsec2.user.conf: Invalid command 'SecFilterScanOutput', perhaps misspelled or defined by a module not included in the server configuration Now supposedly this is supposed to work, I even have it running in ModSec2 on a non-cpanel server setup manually. So I know ModSec2 supports it. Anyone have any ideas? I have asked this question over at cpanel forum and it got nowhere.

  Read the article

< Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >