Search Results

Search found 21717 results on 869 pages for 'setup versions'.

Page 496/869 | < Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >

  • Printing to shared printers across VPN

    - by CYMR0
    I have a program that prints labels at five remote sites. Two sites, aren't working, but the rest are with an identical (as far as I can tell) setup. Using Wireshark, I have determined that the handshaking all goes well, but after the "Open Print File Response" the packet that is sent from the server, doesn't reach the client. But I'm a bit at a loss as to where I go from here. I know the port the packet was sent on (445) isn't being blocked, the RST packet gets sent on the same port and that gets there fine. It's also weird that the three out of five sites are working fine. This has been up and running for years without issue, all that we have changed is our connectivity (from DSL to bonded DSL). But this traffic is over a VPN - so it can't be the ISP interfering either can it? I'm totally stuck, and any help would be much appreciated. Thanks!

    Read the article

  • DokuWiki Segmentation Fault On Radius Auth

    - by mrduclaw
    I'm running x64 Ubuntu 12.04. I did a simple apt-get install dokuwiki to install DokuWiki. And I'm trying to follow the directions located here: http://www.dokuwiki.org/auth:radius to get Radius authentication working. Things seemed to install OK. Under Configuration Manager I selected Authentication backend to be "Radius" and filled in the Radius details at the bottom. Now, however, whenever I try to log into the Wiki, my browser gives me the following error: No data received I checked /var/log/apache2/error.log and see this: [Tue Jul 10 22:22:14 2012] [notice] child pid 5270 exit signal Segmentation fault (11) I'm fairly sure the Radius server is setup correctly as it correctly authenticates with my squid proxy and other stuff on the network. But this is about the extent of my Linux troubleshooting skills. Can anyone suggest steps for me to follow to help track down what's causing apache2 to segfault short of attaching with gdb and issuing a set follow-fork-mode? I'm also open to just hearing suggestions for simila

    Read the article

  • Windows Server 2008 R2 DNS Server not working?

    - by wolfvilleian
    Hi, I have a server running Windows Server 2008 R2 hosting a DNS server, exchange 2010 and is a domain controller. One computer on the network (and domain) can ping the server 25% of the time, also when I try to ping it's own hostname it also does not work. However another computer that is on the domain can ping it fine, and another computer on the network but not domain can ping fine as well. The computer that cannot ping the server is setup to use the DNS server running on the server only (secondary dns points to nothing) and it will resolve the hostname of the server to the external IP not internal when the other two computers correctly resolve the internal All 3 computers and server are connected directly into the same switch. Does anyone have any ideas on how to fix this? Thanks

    Read the article

  • How do I do a swing migration of Exchange 2007?

    - by Graeme Donaldson
    As per my previous question, I have an Exchange 2007 box which is also a DC. Since I can demote it while Exchange is installed, I need to a swing migration. Does anyone have any articles, tips or experiences to share on this? The last time I did a swing it was with Exchange 2003 and even that is a little rusty in my head. The setup is a single Exchange 2007 Hub/Edge/Mailbox/CAS server. Its currently on Windows Server 2008, I can migrate it to the same OS, or I can go to 2008 R2, I'm not really picky on that. We're running OWA/ActiveSync/POP3(S)/IMAP(S) for client access. I already have another fully functional DC/GC/DNS box in the same site and clients in the site are already using that for DNS. It's also the preferred site bridgehead for AD replication. Any tips?

    Read the article

  • Send raw data to USB parallel port after upgrading to 11.10

    - by zaphod
    I have a laser cutter connected via a generic USB to parallel adapter. The laser cutter speaks HPGL, as it happens, but since this is a laser cutter and not a plotter, I usually want to generate the HPGL myself, since I care about the ordering, speed, and direction of cuts and so on. In previous versions of Ubuntu, I was able to print to the cutter by copying an HPGL file directly to the corresponding USB "lp" device. For example: cp foo.plt /dev/usblp1 Well, I just upgraded to Ubuntu 11.10 oneiric, and I can't find any "lp" devices in /dev anymore. D'oh! What's the preferred way to send raw data to a parallel port in Ubuntu? I've tried System Settings Printing + Add, hoping that I might be able to associate my device with some kind of "raw printer" driver and print to it with a command like lp -d LaserCutter foo.plt But my USB to parallel adapter doesn't seem to show up in the list. What I do see are my HP Color LaserJet, two USB-to-serial adapters, "Enter URI", and "Network Printer". Meanwhile, over in /dev, I do see /dev/ttyUSB0 and /dev/ttyUSB1 devices for the 2 USB-to-serial adapters. I don't see anything obvious corresponding to the HP printer (which was /dev/usblp0 prior to the upgrade), except for generic USB stuff. For example, sudo find /dev | grep lp produces no output. I do seem to be able to print to the HP printer just fine, though. The printer setup GUI gives it a device URI starting with "hp:" which isn't much help for the parallel adapter. The CUPS administrator's guide makes it sound like I might need to feed it a device URI of the form parallel:/dev/SOMETHING, but of course if I had a /dev/SOMETHING I'd probably just go on writing to it directly. Here's what dmesg says after I disconnect and reconnect the device from the USB port: [ 924.722906] usb 1-1.1.4: USB disconnect, device number 7 [ 959.993002] usb 1-1.1.4: new full speed USB device number 8 using ehci_hcd And here's how it shows up in lsusb -v: Bus 001 Device 008: ID 1a86:7584 QinHeng Electronics CH340S Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1a86 QinHeng Electronics idProduct 0x7584 CH340S bcdDevice 2.52 iManufacturer 0 iProduct 2 USB2.0-Print iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Device Status: 0x0000 (Bus Powered)

    Read the article

  • ArchBeat Link-o-Rama for 2012-06-12

    - by Bob Rhubart
    Exalogic Elastic Cloud v2.0.1 sneak preview | Jos Nijhoff Jos Nijhoff lifts the hood and kicks the tires. Podcast with Oracle Cloud experts | William Vambenepe ow.ly William Vambenepe plugs the latest OTN ArchBeat podcast—in which he participates—but gets my name wrong. Networking in VirtualBox | The Fat Bloke The Fat Bloke shares "a quick overview of the different ways you can setup networking in VirtualBox." If you aren't among those finding bugs you might be among those complaining about them later | Markus Eisele Oracle ACE Director Markus Eisele offers some thoughts on JavaEE. ADF Tutorial Chapter 1: Introduction | Yannick Ongena Yannick Ongena's tutorial provides back-end functionality for a VIE portal. The truth is out there… | Arjan Kramer Capgemini's Arjan Kramer shares his opinion on the Vitrue acquisition and Oracle's Cloud strategy. Oracle and Cloud - The Truckin' Continues | Floyd Teter Oracle ACE Director Floyd Teter weighs in on the recent Oracle Cloud announcement. Thought for the Day "No amount of elegant programming or technology will solve a problem if it is improperly specified or understood to begin with." — Milt Bryce (1925 - 2005) Source: softwarequotes.com

    Read the article

  • Multiple Subnets on home network... would this work?

    - by rockinthesixstring
    We are looking at renting out the basement suit in our home and want to offer internet as part of the package. I however do not want the downstairs tennent to have access to our network (home office = private data). We currently have a pfsense firewall as our gateway and a Windows Server 2003 box is doing our primary DHCP (192.168.0.0/24) and DNS. Here's what I'd like to do... I'd like to setup another subnet on the DHCP server (192.168.1.0/24), and hook in another wireless router (as access point only) and address it as 192.168.1.1... from there the router will hook into our primary switch and then out through the firewall. Will Server 2003 (If I add a 192.168.1.x/24 IP to the nic) serve DHCP to the devices that connect to the new router, and will it isolate that from our network? Thanks in advance... I'm very new to multiple subnets.

    Read the article

  • Configure Windows Routes for VPN

    - by Florin Sabau
    I have a Virtual PC/VMWare machine that runs Windows Server 2003. This virtual machine uses an IPSec VPN client program to connect to a remote network. I configured the virtual machine to have 2 NICs: NAT - to be used by the VPN Client to access the remote network Host only - to be able to access the virtual machine from the host The reason I have this setup is because I want to be able to access some remote network from the host machine. I could've installed the VPN client on the host machine, but the host runs Windows 7 and the client doesn't support it. The problem: although the virtual machine is normally reachable (ping + http access), as soon as the VPN client is started, neither of the NIC addresses are reachable anymore. I'm wondering if it is a routing problem that needs to be addressed? How do routing/VPN client connection affect the ability of the server to respond to client requests from the host?

    Read the article

  • Migrating master-slave MySQL database servers to 2 new servers, any tips or suggestions?

    - by mmattax
    I'm setting up 2 new database servers that will be replacing a current master-slave setup. All boxes are running / will be running MySQL on RHEL. Our current naming conventions: db1 - master database db2 - slave (using MySQL replication) db01 - new master db02 - new slave We need to get db01 to be the new master with db02 as the new slave. What is the best way to migrate db1 and db2 to db01 and db02? db1 and db2 are running in a production setting and we need to minimize all downtime; db1 has roughly 30GB of data in the database. Any suggestions or tips on how to migrate to our new servers would be much appreciated.

    Read the article

  • Optimising bare-metal hypervisor installation

    - by Stephen
    what is the best way to install a bare metal hypervisor (i.e. to host multiple VM's)? I spoke to a friend and he is using a HP server to host all his VMs with VMware ESXi, but he installed the VMWARE esxi software on a flash card. He can then use his full hard disk capacity from each drive for the VMs. Is this a pretty standard setup when configuring a bare-metal hypervisor? How do you guys do it, and what is best?

    Read the article

  • I cannot install flash player, I am getting 1603 exit code

    - by Naz
    I am trying to install flash player silently, using a powershell script. I do not think it is being installed. I looked under "control panel-uninstall programs" I don't see flash player listed there. Also, I am printing the exit code for the process and it prints 1603 exit code, which is "fatal error during installation" As an experiment, I double click on the flash player .msi file, and it gave me 1722 error " Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. "

    Read the article

  • LinkSys router suddenly cannot get an IP address

    - by user43208
    I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

    Read the article

  • Installing router - failed to verify router settings

    - by Andi
    I'm trying to install a TP-Link wireless router. I am using a modem an have a PPPoE connection. I connected the router to the computer and the modem, but in the last step of the Easy Setup it says " Failed to verify router settings. 1. Please check the WAN connection type and parameters. 2. Please check your connectivity and retry." The internet works fine if i connect the modem directly to the computer. When I connect the computer to the router, the wireless network is detected by other devices, but cannot be accessed. I accessed the router settings, and everything seems normal, except that it just says "Connecting...". It never manages to connect to the internet. I tried restarting the router and several walkthroughs on the web, but I couldn't get it to work.

    Read the article

  • LinkSys router suddenly cannot get an IP address

    - by user43208
    I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

    Read the article

  • How to partition Seagate FreeAgent GoFlex 2TB hard disk?

    - by balki
    Hi I bought a new Seagate 2TB external hard disk. I opened the drive's application in my virtual windows, did product registration using the application present in it. I have few questions on how best to use it. The drive by default has some files and folders - setup.exe, System Volume Information, USB 3.0 PC Card Adapter etc,. I copied all the files to my laptop. Is it safe to delete these files? It has a dash board for windows which allows to tune power options, test the drive etc. Will I be able to use the dash board if I put back all these files and mount on windows again? I want to partition and format the hard disk. Data I like to store is Around 10 to 20 GB Files - Virtual box images. Around 4GB Files - Dvd images. Other Movies and personal Files. What is the best filesystem to store very huge files like 10 to 20GB files. So that they are written and accessed fast also best uses the drive's capacity. If I leave one of the partition as ntfs and others to different files systems, will it be able to mount on windows and Will I be able to use the device's dash board? Note: I dont need any encryption for my data. Any other advice on using the hard disk is also welcome.

    Read the article

  • Connect Team Foundation Service/TFS 2012 with Visual Studio 2010 &amp; Visual Studio 2008

    - by Vishal
    Hello, Microsoft finally released the Team Foundation Service in late October 2012 after its long time in the preview phase. I was already using the TFS Preview which was free but I was happy to see Microsoft releasing the Team Foundation Service also FREE for upto 5 users. Isn't that great news? I know there are bunch of other free source control repositories (Github, Bitbucket, SVN etc.) out there but I somehow like TFS better. Also the other good thing about the final release was that I didn’t had to do any kind of migration of my code from preview to final release version. Just changed the TFS connection URL and it worked like a charm. Anyways, if you are a startup with small team and need some awesome Source Control along with all the good Project Management, Continuous Integration (Build, Test, Deploy), Team Collaboration, Agile/Scrum planning etc. features than Team Foundation Service is your answer. Microsoft has not yet released their pricing for more than 5 users and will be releasing it sometime in early 2013. What if as of now you have a team more than 5 users and you want to use Team Foundation Service, the good news is you can use it for FREE but when they release the final pricing, you will have to transition to the paid plan. Lot of story, getting to the point, connecting to Team Foundation Service with Visual Studio 2012 is straight forward and would work out of the box but it wont for previous versions of Visual Studio. You will have to upgrade to the latest service pack first and than install the forward compatibility pack. (1st : Service Packs & 2nd: Forward Compatibility packs) For Visual Studio 2010: Visual Studio 2010 Service Pack 1. Visual Studio 2010 forward compatibility for TFS 2012 and Team Foundation Service.         For Visual Studio 2008: Visual Studio 2008 Service Pack 1. Visual Studio 2008 forward compatibility for TFS 2012 & Team Foundation Service. Restart your system. Visual Studio 2008 will not work if you only put https://xxx.visualstudio.com. You will have to put your collection name too as shown below.       By the way, it doesn’t matter if you are an Apple Application Developer or Android App Developer, you can still use Team Foundation Service as your source control. Below are few links to connect to Team Foundation Service with other IDEs: Connect Eclipse to Team Foundation Service. Connect XCode to Team Foundation Service. Happy coding. Vishal Mody

    Read the article

  • Ubuntu won't suspend automatically any more

    - by Sparhawk
    In the last month or so, Ubuntu (12.04) has stopped sleeping automatically. I've gone to System Settings Power, and verified (and toggled) "suspend on inactive for" to 5 minutes (for both battery and "when plugged in"), but the system stays awake. I've also tried used code similar to $ gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout 300 $ gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-battery-timeout 300 to set the timeout values. I've also verified these in dconf Editor. Previously, I could set this quite low to make my computer sleep quickly, but now it no longer works either. I'm not sure if this is relevant, but under old versions of Ubuntu, if I wanted my computer to never suspend (via the CLI), I would also have to set $ gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac false At some point, this seemed to have been depreciated (and also gave me the error "No such key 'sleep-inactive-ac'"). I found that it it was enough to set sleep-inactive-ac-timeout to 0. This worked for a while, but at some point auto-suspend stopped working as stated above. Oddly enough, the sleep-inactive-ac key is still present when I look via dconf editor. However, when I click it, it says "no schema", and the summary, etc. fields are blank. To test if the dconf power plugin was working, I tried playing around with other settings in the schema. Idle-dim-time and idle-dim-ac work as expected . However, setting sleep-display-ac to 5 seconds has no effect. I'm also not sure if this is relevant, but I've uninstalled gnome-screensaver, and installed xscreensaver. I have tried killing xscreensaver and re-installing gnome-screensaver, but this did not help. I've also had some trouble with DPMS. I'm not sure if this is related, but I'll put the information here, just in case. Using xscreensaver, I set Power Management to enabled, with standby and suspend timeouts to 10 minutes. I've verified these settings in ~/.xscreensaver and xset q. However, the screen blanks after about 30 seconds. If I turn off DPMS (either via xscreensaver GUI or modifying ~/.xscreensaver), it won't blank at all, so I know that DPMS is partially reading the xscreensaver settings. -- edit I've attempted more troubleshooting, by creating a new user account, then logging out of the main account and into the new account. I've tried modifying the timeouts via dconf, but get the same results as above (i.e. it doesn't work, nor does sleep-display-ac, but idle-dim-time and idle-dim-ac work). Also, the depreciated sleep-display-ac key is not visible, so I think that this is probably unrelated. -- edit I've since moved to gnome-shell instead of unity, and still have this problem, so I guess that it's something to do with gnome-power-manager.

    Read the article

  • Small-scale database options for .NET

    - by raney
    I have a .NET 4.0/WPF based application I've developed and maintain for my company that acts as a friendly GUI central-point-of-information, combining information pulled from a couple of SQL databases, as well as CSV exports from a few other applications. I would like to build out my own database to support the entirety of the information that the application accesses, so that I could have a service running on my server that would read in necessary remote SQL info and file exports, to provide the user's application with a single database to connect to, as well as to remove all of the file handling currently involved in the program (copying new CSV resources from network location, reading them into memory each launch.) I have complete control and flexibility here as long as the user's experience isn't affected, and this is as much a learning experience as it is tidying up. Caveat being, I don't have much in the way of a budget. Right now I recognize my options to be: SQL Express - I'm comfortable with the server setup, I like ADO.NET and LINQ to SQL. I feel that I have the least to learn here, but it would let me focus on SQL in a familiar environment. Perhaps in conjunction with Entity Framework? MongoDB - I don't know a whole lot about, but I've heard the name enough to make me curious. Brief research seems friendly enough, and there is .NET support. I like working with open source projects. My questions are: What's popular and extensible right now? I'm not far from starting to job-hunt, and I'd like this project to be relevant going forward. What am I missing? Pros, cons? Other options? What plays well with .NET? What are the things I should be considering, the questions I should be asking, when making a decision like this? Thanks for your time.

    Read the article

  • Automatic TRIM vs. manual TRIM

    - by Eike Cochu
    I am currently trying to find out how to trim with my new TP and was wondering about the difference of manual/online trimming. Here is my setup: ThinkPad T430s with SSD Samsung 830, 128GB and Xubuntu 12.10, here are some outputs to check if trim will work on my system (got these from here: http://wiki.ubuntuusers.de/SSD/TRIM) root@eike-tp:~# sudo hdparm -I /dev/sda | grep -i TRIM * Data Set Management TRIM supported (limit 8 blocks) First, I tried the online trimming: How to enable TRIM? my fstab with discard inserted: UUID=d6c49c17-a4f1-466c-9f7e-896c20db3bba / ext4 discard,noatime,errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=a0322f5f-c6c1-4896-863f-668f0638d8cf none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 I tried to test if it works (but I don't get any zeroes when I try it with /dev/sda), but found out that this method is only possible with SSD type 2 and I seem to have type 3. So I don't know if it works or not. The Ubuntuwiki (first link) recommends manual trimming, so I set up a daily cronjob instead of discard: #!/bin/sh LOG=/var/log/batched_discard.log echo "*** $(date -R) ***" >> $LOG fstrim -v / >> $LOG the wiki article suggests weekly or daily. Now to my questions: How often executes the automated trim? How often is recommended? Online vs. manual trimming? Thank you for your help

    Read the article

  • 12.04 grub unable to boot on /sde, upgrade-grub and boot-repair failed, please help

    - by VGR
    My problem is I've 4 disks in a raid array listed as sda, sdb... sdd and grub 2 refuses to boot on /sde (the 5th disk, standalone and containing a clean install of 12.04 64 bits). I tried all solutions but all fail. (live CD/USB with grub-setup, also tried repair-grub, and tried also in the "grub rescue" set prefix= etc). I also tried to deactivate the RAID array in the BIOS, but I'd rather not destroy it, and I didn't find a way to make the standalone disk as '/sda1' (this would satisfy grub). In the BIOS, the would-be /sda is the only bootable hard disk; it ends up as /sde and grubs complains. I've made repair-grub issue a pastebin. I always end up in grub-rescue and I'm stuck. I need Ubuntu to boot so that I can add the device array handler for my disks. I can't switch the disks and I can't disconnect the SATA RAID controller. I need: (a) a workaround so that grub starts on /sde; or (b) a way to change the order in which Ubuntu sees the disks, at boot time. I could then provide grub with a /sda1. Thanks a lot. up please thanks a lot it's not the same problem as booting ubuntu from raid. My RAID array serves only of data repository windows had no problem with this configuration

    Read the article

  • How to let maas' cloud-init client select internal mirror?

    - by Michael
    Our maas lan can't access internet and have a internal apt-mirror site 192.168.3.6. I changed mirror set of maas server's snippets/maas_proxy file like: d-i mirror/country string manual d-i mirror/http/hostname string 192.168.3.6 d-i mirror/http/directory string /ubuntu d-i mirror/http/proxy string I deployed two maas node ok. Dashboard show the two node's state are ready. But node's cloud-init client changed the apt's sources.list like this: ## Note, this file is written by cloud-init on first boot of an instance ## modifications made here will not survive a re-bundle. ## if you wish to make changes you can: ## a.) add 'apt_preserve_sources_list: true' to /etc/cloud/cloud.cfg ## or do the same in user-data ... deb http://archive.ubuntu.com/ubuntu precise main deb-src http://archive.ubuntu.com/ubuntu precise main ... Directly use cobbler install node(without maas), the node apt's sources.list like: ... deb http://192.168.3.6/ubuntu precise main deb-src http://192.168.3.6/ubuntu precise main ... My question is: How to set user-data in maas? So that I can set cloud-init's mirror's url to 192.168.3.6 or prevent cloud-init to change mirror's url. Maas node's file /home/ubuntu/.ssh/authorized_keys is empty. Is it caused by the mirror's setup?

    Read the article

  • Hosted Exchange 2010 Send As

    - by Ravi
    I have a hosted exchange 2010 and I am trying to setup the Send-As permission. I am following http://technet.microsoft.com/en-us/library/bb676368.aspx which basically describes the commands for achieving this. I have user account aaa and bbb [PS] C:\Windows\system32get-mailbox -organization myorg -identity "aaa" Name Alias ServerName ProhibitSendQuota ---- ----- ---------- ----------------- aaa aaa mx1 4.95 GB (5,315,022,848 bytes) [PS] C:\Windows\system32get-mailbox -organization myorg-identity "bbb" Name Alias ServerName ProhibitSendQuota ---- ----- ---------- ----------------- bbb bbb mx1 4.95 GB (5,315,022,848 bytes) Now, when I use the command below to give bbb permission to send-as aaa, I get the following error: [PS] C:\Windows\system32get-mailbox -organization myorg -identity "aaa" | Add-ADPermission -Extended Rights "Send As" -user "bbb" mx1/Microsoft Exchange Hosted Organizations/myorg/aaa wasn't found. Please make sure you've typed it correctly. + CategoryInfo : InvalidArgument: (:) [Add-ADPermission], ManagementObjectNotFoundException + FullyQualifiedErrorId : D2FD338,Microsoft.Exchange.Management.RecipientTasks.AddADPermission The error message that 'aaa' was not found does not make sense because i just retrieved the mailbox in the previous commands. I have tried using email addresses instead of alias but it does not work.

    Read the article

  • Implementing a form of port knocking + Phone Factor = 2 Factor auth for RDP?

    - by jshin47
    I have been looking into how to secure a publicly-available RDP endpoint and want to implement our two-factor authentication RADIUS server, PhoneFactor. I would like to implement the following process: User opens up web app in browser In web app, user enters username + password, initiates RADIUS auth Phone factor calls user to complete auth Once user is authenticated, port 3389 is opened on user's IP on pfSense firewall. After some amount of time, firewall rule is removed for that IP I would like to know the following: Is this a typical setup? If it is a bad idea, please explain why. If it is possible, are there any packages that assist with this? Specifically, the third step, where the appropriate firewall rule would need to be added... Edit: I am aware of TS Web Gateway, but I want the users to be able to use the traditional RDP client...

    Read the article

  • The bcdedit export operation fails. windows vista not booting.

    - by ocurro
    I'm fixing my boot record with bootrec.exe, the first command goes: C:\>bcdedit /export c:\BCD_Backup Immediately I receive this error here: The store export operation has failed. The requested system device cannot be found. Likewise, the next command fails, because bcd file is missing: C:\>attrib bcd -s -h -r Lastly, when trying the next command, all it returns is "The requested system device cannot be found". C:\>bootrec /RebuildBcd I'm using Windows 7 setup image to operate. Have Vista installed atm. Has it happened to you? I'd appreciate some orientation.

    Read the article

  • What is the old AIX & RS/6000 console font?

    - by Xepoch
    I'm sick of Lucida Console font on my putty sessions. I used to love whatever font was employed on IBM rs/6000 consoles. Does anyone know the name of that font and if it is available (and usable) from anywhere? Sorry, I need to clarify the "consoles" to which I refer were not the serial consoles but rather smaller stand-alone X-Window systems. They could be setup without XDM and would start in text screen. I'm searching like crazy to find the actual machines I remember (there were hundreds of them at Uni) but I don't have the IBM #s in front of me. It looked amazingly similar to the PS/2 like this:

    Read the article

< Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >